Merge tag 'iio-for-3.15a' of...

Merge tag 'iio-for-3.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new drivers and cleanups for IIO in the 3.15 cycle.

New drivers:
* si7005 relative humidity and temperature sensor
* Lite-on ltr501 ambient light and proximity sensor

Cleanups
* Clean up some dead comments in max1363
* Drop some obsolete variables in adjd_s311 and tcs3472 left over from
  the introduction of iio_push_to_buffers_with_timestamp.
* Drop some unneeded linux/init.h includes
* Squish a sparse warning in mpl3115 by correctly specifying a be32 variable.
* A number of cleanups and fixes for sca3000
* Drop an unneed checks in mxs-lradc, ad7303 and adis16400.
* Drop a platform_set_drvdata in viperboard after the only use of it was
  removed during a devm conversion.
* Add a missing device name for ak8975 to comply with the ABI.
* Put mpu6050 into the IMU menu as it slipped out into the main menu.
* Fix a typo and some comment formatting in mpu6050.
* Document at91 ADC clock properties.

Documentation/devicetree/bindings/arm/atmel-adc.txt

@@ -5,6 +5,9 @@ Required properties:
     <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5"
   - reg: Should contain ADC registers location and length
   - interrupts: Should contain the IRQ line for the ADC
+  - clock-names: tuple listing input clock names.
+	Required elements: "adc_clk", "adc_op_clk".
+  - clocks: phandles to input clocks.
   - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
     device
   - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
@@ -44,6 +47,8 @@ adc0: adc@fffb0000 {
 	compatible = "atmel,at91sam9260-adc";
 	reg = <0xfffb0000 0x100>;
 	interrupts = <20 4>;
+	clocks = <&adc_clk>, <&adc_op_clk>;
+	clock-names = "adc_clk", "adc_op_clk";
 	atmel,adc-channel-base = <0x30>;
 	atmel,adc-channels-used = <0xff>;
 	atmel,adc-drdy-mask = <0x10000>;

drivers/iio/adc/max1363.c

@@ -8,17 +8,11 @@
   * based on linux/drivers/acron/char/pcf8583.c
   * Copyright (C) 2000 Russell King
   *
+  * Driver for max1363 and similar chips.
+  *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License version 2 as
   * published by the Free Software Foundation.
-  *
-  * max1363.c
-  *
-  * Partial support for max1363 and similar chips.
-  *
-  * Not currently implemented.
-  *
-  * - Control of internal reference.
   */
 
 #include <linux/interrupt.h>

drivers/iio/adc/ti_am335x_adc.c

@@ -13,7 +13,6 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/module.h>

drivers/iio/adc/twl6030-gpadc.c

@@ -28,7 +28,6 @@
  * 02110-1301 USA
  *
  */
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>

drivers/iio/adc/viperboard_adc.c

@@ -139,8 +139,6 @@ static int vprbrd_adc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	platform_set_drvdata(pdev, indio_dev);
-
 	return 0;
 }
 

drivers/iio/dac/ad7303.c

@@ -92,7 +92,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
 	ad7303_write(st, chan->channel, st->dac_cache[chan->channel]);
 
 	mutex_unlock(&indio_dev->mlock);
-	return ret ? ret : len;
+	return len;
 }
 
 static int ad7303_get_vref(struct ad7303_state *st,

drivers/iio/dac/max517.c

@@ -19,7 +19,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>

drivers/iio/dac/mcp4725.c

@@ -15,7 +15,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
 #include <linux/delay.h>

drivers/iio/humidity/Kconfig

@@ -12,4 +12,14 @@ config DHT11
 	  Other sensors should work as well as long as they speak the
 	  same protocol.
 
+config SI7005
+	tristate "SI7005 relative humidity and temperature sensor"
+	depends on I2C
+	help
+	  Say yes here to build support for the Silabs Si7005 relative
+	  humidity and temperature sensor.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called si7005.
+
 endmenu

drivers/iio/humidity/Makefile

@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_DHT11) += dht11.o
+obj-$(CONFIG_SI7005) += si7005.o

drivers/iio/humidity/si7005.c

+/*
+ * si7005.c - Support for Silabs Si7005 humidity and temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x40)
+ *
+ * TODO: heater, fast mode, processed mode (temp. / linearity compensation)
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define SI7005_STATUS 0x00
+#define SI7005_DATA 0x01 /* 16-bit, MSB */
+#define SI7005_CONFIG 0x03
+#define SI7005_ID 0x11
+
+#define SI7005_STATUS_NRDY BIT(0)
+#define SI7005_CONFIG_TEMP BIT(4)
+#define SI7005_CONFIG_START BIT(0)
+
+#define SI7005_ID_7005 0x50
+#define SI7005_ID_7015 0xf0
+
+struct si7005_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 config;
+};
+
+static int si7005_read_measurement(struct si7005_data *data, bool temp)
+{
+	int tries = 50;
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	ret = i2c_smbus_write_byte_data(data->client, SI7005_CONFIG,
+		data->config | SI7005_CONFIG_START |
+		(temp ? SI7005_CONFIG_TEMP : 0));
+	if (ret < 0)
+		goto done;
+
+	while (tries-- > 0) {
+		msleep(20);
+		ret = i2c_smbus_read_byte_data(data->client, SI7005_STATUS);
+		if (ret < 0)
+			goto done;
+		if (!(ret & SI7005_STATUS_NRDY))
+			break;
+	}
+	if (tries < 0) {
+		ret = -EIO;
+		goto done;
+	}
+
+	ret = i2c_smbus_read_word_swapped(data->client, SI7005_DATA);
+
+done:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int si7005_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan, int *val,
+			    int *val2, long mask)
+{
+	struct si7005_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = si7005_read_measurement(data, chan->type == IIO_TEMP);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_TEMP) {
+			*val = 7;
+			*val2 = 812500;
+		} else {
+			*val = 3;
+			*val2 = 906250;
+		}
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_OFFSET:
+		if (chan->type == IIO_TEMP)
+			*val = -50 * 32 * 4;
+		else
+			*val = -24 * 16 * 16;
+		return IIO_VAL_INT;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_chan_spec si7005_channels[] = {
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+	}
+};
+
+static const struct iio_info si7005_info = {
+	.read_raw = si7005_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int si7005_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct si7005_data *data;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = dev_name(&client->dev);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &si7005_info;
+
+	indio_dev->channels = si7005_channels;
+	indio_dev->num_channels = ARRAY_SIZE(si7005_channels);
+
+	ret = i2c_smbus_read_byte_data(client, SI7005_ID);
+	if (ret < 0)
+		return ret;
+	if (ret != SI7005_ID_7005 && ret != SI7005_ID_7015)
+		return -ENODEV;
+
+	ret = i2c_smbus_read_byte_data(client, SI7005_CONFIG);
+	if (ret < 0)
+		return ret;
+	data->config = ret;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id si7005_id[] = {
+	{ "si7005", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, si7005_id);
+
+static struct i2c_driver si7005_driver = {
+	.driver = {
+		.name	= "si7005",
+		.owner	= THIS_MODULE,
+	},
+	.probe = si7005_probe,
+	.id_table = si7005_id,
+};
+module_i2c_driver(si7005_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Silabs Si7005 humidity and temperature sensor driver");
+MODULE_LICENSE("GPL");

drivers/iio/imu/Kconfig

@@ -25,6 +25,8 @@ config ADIS16480
 	  Say yes here to build support for Analog Devices ADIS16375, ADIS16480,
 	  ADIS16485, ADIS16488 inertial sensors.
 
+source "drivers/iio/imu/inv_mpu6050/Kconfig"
+
 endmenu
 
 config IIO_ADIS_LIB
@@ -38,5 +40,3 @@ config IIO_ADIS_LIB_BUFFER
 	help
 	  A set of buffer helper functions for the Analog Devices ADIS* device
 	  family.
-
-source "drivers/iio/imu/inv_mpu6050/Kconfig"

drivers/iio/imu/adis16400_core.c

@@ -281,7 +281,7 @@ static ssize_t adis16400_write_frequency(struct device *dev,
 	st->variant->set_freq(st, val);
 	mutex_unlock(&indio_dev->mlock);
 
-	return ret ? ret : len;
+	return len;
 }
 
 /* Power down the device */

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -12,7 +12,6 @@
 */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
@@ -117,7 +116,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
 		return result;
 
 	if (en) {
-		/* Wait for output stablize */
+		/* Wait for output stabilize */
 		msleep(INV_MPU6050_TEMP_UP_TIME);
 		if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
 			/* switch internal clock to PLL */

drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c

@@ -12,7 +12,6 @@
 */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/err.h>

drivers/iio/light/Kconfig

@@ -90,6 +90,18 @@ config SENSORS_LM3533
 	  changes. The ALS-control output values can be set per zone for the
 	  three current output channels.
 
+config LTR501
+	tristate "LTR-501ALS-01 light sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the Lite-On LTR-501ALS-01
+	 ambient light and proximity sensor.
+
+	 This driver can also be built as a module.  If so, the module
+         will be called ltr501.
+
 config TCS3472
 	tristate "TAOS TCS3472 color light-to-digital converter"
 	depends on I2C

drivers/iio/light/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_CM36651)		+= cm36651.o
 obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
+obj-$(CONFIG_LTR501)		+= ltr501.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_TCS3472)		+= tcs3472.o
 obj-$(CONFIG_TSL4531)		+= tsl4531.o

drivers/iio/light/adjd_s311.c

@@ -14,7 +14,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
@@ -120,7 +119,6 @@ static irqreturn_t adjd_s311_trigger_handler(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct adjd_s311_data *data = iio_priv(indio_dev);
 	s64 time_ns = iio_get_time_ns();
-	int len = 0;
 	int i, j = 0;
 
 	int ret = adjd_s311_req_data(indio_dev);
@@ -135,7 +133,6 @@ static irqreturn_t adjd_s311_trigger_handler(int irq, void *p)
 			goto done;
 
 		data->buffer[j++] = ret & ADJD_S311_DATA_MASK;
-		len += 2;
 	}
 
 	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, time_ns);

drivers/iio/light/tcs3472.c

@@ -179,7 +179,6 @@ static irqreturn_t tcs3472_trigger_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct tcs3472_data *data = iio_priv(indio_dev);
-	int len = 0;
 	int i, j = 0;
 
 	int ret = tcs3472_req_data(data);
@@ -194,7 +193,6 @@ static irqreturn_t tcs3472_trigger_handler(int irq, void *p)
 			goto done;
 
 		data->buffer[j++] = ret;
-		len += 2;
 	}
 
 	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,

drivers/iio/magnetometer/ak8975.c

@@ -513,6 +513,7 @@ static int ak8975_probe(struct i2c_client *client,
 	indio_dev->channels = ak8975_channels;
 	indio_dev->num_channels = ARRAY_SIZE(ak8975_channels);
 	indio_dev->info = &ak8975_info;
+	indio_dev->name = id->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	err = iio_device_register(indio_dev);

drivers/iio/pressure/mpl3115.c

@@ -77,7 +77,7 @@ static int mpl3115_read_raw(struct iio_dev *indio_dev,
 			    int *val, int *val2, long mask)
 {
 	struct mpl3115_data *data = iio_priv(indio_dev);
-	s32 tmp = 0;
+	__be32 tmp = 0;
 	int ret;
 
 	switch (mask) {

drivers/staging/iio/accel/sca3000.h

@@ -65,7 +65,8 @@
 
 #define SCA3000_RING_BUF_ENABLE			0x80
 #define SCA3000_RING_BUF_8BIT			0x40
-/* Free fall detection triggers an interrupt if the acceleration
+/*
+ * Free fall detection triggers an interrupt if the acceleration
  * is below a threshold for equivalent of 25cm drop
  */
 #define SCA3000_FREE_FALL_DETECT		0x10
@@ -73,8 +74,9 @@
 #define SCA3000_MEAS_MODE_OP_1			0x01
 #define SCA3000_MEAS_MODE_OP_2			0x02
 
-/* In motion detection mode the accelerations are band pass filtered
- * (aprox 1 - 25Hz) and then a programmable threshold used to trigger
+/*
+ * In motion detection mode the accelerations are band pass filtered
+ * (approx 1 - 25Hz) and then a programmable threshold used to trigger
  * and interrupt.
  */
 #define SCA3000_MEAS_MODE_MOT_DET		0x03
@@ -99,8 +101,10 @@
 #define SCA3000_REG_CTRL_SEL_MD_Y_TH		0x03
 #define SCA3000_REG_CTRL_SEL_MD_X_TH		0x04
 #define SCA3000_REG_CTRL_SEL_MD_Z_TH		0x05
-/* BE VERY CAREFUL WITH THIS, IF 3 BITS ARE NOT SET the device
-   will not function */
+/*
+ * BE VERY CAREFUL WITH THIS, IF 3 BITS ARE NOT SET the device
+ * will not function
+ */
 #define SCA3000_REG_CTRL_SEL_OUT_CTRL		0x0B
 #define SCA3000_OUT_CTRL_PROT_MASK		0xE0
 #define SCA3000_OUT_CTRL_BUF_X_EN		0x10
@@ -109,8 +113,9 @@
 #define SCA3000_OUT_CTRL_BUF_DIV_4		0x02
 #define SCA3000_OUT_CTRL_BUF_DIV_2		0x01
 
-/* Control which motion detector interrupts are on.
- * For now only OR combinations are supported.x
+/*
+ * Control which motion detector interrupts are on.
+ * For now only OR combinations are supported.
  */
 #define SCA3000_MD_CTRL_PROT_MASK		0xC0
 #define SCA3000_MD_CTRL_OR_Y			0x01
@@ -121,7 +126,8 @@
 #define SCA3000_MD_CTRL_AND_X			0x10
 #define SAC3000_MD_CTRL_AND_Z			0x20
 
-/* Some control registers of complex access methods requiring this register to
+/*
+ * Some control registers of complex access methods requiring this register to
  * be used to remove a lock.
  */
 #define SCA3000_REG_ADDR_UNLOCK			0x1e
@@ -139,7 +145,8 @@
 /* Values of multiplexed registers (write to ctrl_data after select) */
 #define SCA3000_REG_ADDR_CTRL_DATA		0x22
 
-/* Measurement modes available on some sca3000 series chips. Code assumes others
+/*
+ * Measurement modes available on some sca3000 series chips. Code assumes others
  * may become available in the future.
  *
  * Bypass - Bypass the low-pass filter in the signal channel so as to increase
@@ -160,7 +167,6 @@
  * struct sca3000_state - device instance state information
  * @us:			the associated spi device
  * @info:			chip variant information
- * @indio_dev:			device information used by the IIO core
  * @interrupt_handler_ws:	event interrupt handler for all events
  * @last_timestamp:		the timestamp of the last event
  * @mo_det_use_count:		reference counter for the motion detection unit

drivers/staging/iio/adc/mxs-lradc.c

@@ -897,10 +897,6 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
 {
 	struct mxs_lradc *lradc = iio_priv(iio_dev);
 
-	/* Check for invalid channel */
-	if (chan->channel > LRADC_MAX_TOTAL_CHANS)
-		return -EINVAL;
-
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
 		if (chan->type == IIO_TEMP)