ARM: sun8i: a33: add all operating points
This adds almost all operating points allowed for the A33 as defined by fex files available at: https://github.com/linux-sunxi/sunxi-boards/tree/master/sys_config/a33 There are more possible frequencies in this patch than there are in the fex files because the fex files only give an interval of possible frequencies for a given voltage. All supported frequencies are defined in the original driver code in Allwinner vendor tree. There are two missing frequencies though: 1104MHz and 1200MHz which require the CPU to have 1.32V supplied, which is higher than the default voltage. Without all A33 boards defining the CPU regulator, we cannot have these two frequencies as it would cause the CPU to try to run a higher frequency without "overvolting" which is very likely to crash the CPU. Therefore, these two frequencies must be enabled on a per-board basis. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Showing
Please register or sign in to comment