[PATCH] sh: various fixes

From: Paul Mundt <lethal@linux-sh.org>

This is the rest of the sh update, which includes everything else
sh-specific, general cleanups, bugfixes, etc.  Nothing really eventful.

arch/sh/Kconfig

@@ -27,7 +27,6 @@ config RWSEM_XCHGADD_ALGORITHM
 
 source "init/Kconfig"
 
-
 menu "System type"
 
 choice
@@ -528,6 +527,8 @@ config SH_PCLK_FREQ
 	  with an auto-probed frequency which should be considered the proper
 	  value for your hardware.
 
+menu "CPU Frequency scaling"
+
 config CPU_FREQ
 	bool "CPU Frequency scaling"
 	help
@@ -538,6 +539,8 @@ config CPU_FREQ
 
 	  If unsure, say N.
 
+source "drivers/cpufreq/Kconfig"
+
 config CPU_FREQ_TABLE
 	tristate "CPU frequency table helpers"
 	depends on CPU_FREQ
@@ -559,12 +562,20 @@ config SH_CPU_FREQ
 
 	  If unsure, say N.
 
-source "drivers/cpufreq/Kconfig"
+endmenu
 
 source "arch/sh/drivers/dma/Kconfig"
 
 source "arch/sh/cchips/Kconfig"
 
+config HEARTBEAT
+	bool "Heartbeat LED"
+	depends on SH_MPC1211 || SH_CAT68701 || SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE
+	help
+	  Use the power-on LED on your machine as a load meter.  The exact
+	  behavior is platform-dependent, but normally the flash frequency is
+	  a hyperbolic function of the 5-minute load average.
+
 endmenu
 
 
@@ -614,8 +625,9 @@ config SBUS
 	bool
 
 config MAPLE
-	bool
-	default y if SH_DREAMCAST
+	tristate "Maple Bus support"
+	depends on SH_DREAMCAST
+	default y
 
 source "arch/sh/drivers/pci/Kconfig"
 
@@ -634,351 +646,10 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
-source "drivers/base/Kconfig"
-
-source "drivers/mtd/Kconfig"
-
-source "drivers/parport/Kconfig"
-
-source "drivers/block/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/cdrom/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-source "drivers/telephony/Kconfig"
-
-#
-# input - input/joystick depends on it. As does USB.
-#
-source "drivers/input/Kconfig"
-
-menu "Character devices"
-
-config VT
-	bool "Virtual terminal"
-	---help---
-	  If you say Y here, you will get support for terminal devices with
-	  display and keyboard devices. These are called "virtual" because you
-	  can run several virtual terminals (also called virtual consoles) on
-	  one physical terminal. This is rather useful, for example one
-	  virtual terminal can collect system messages and warnings, another
-	  one can be used for a text-mode user session, and a third could run
-	  an X session, all in parallel. Switching between virtual terminals
-	  is done with certain key combinations, usually Alt-<function key>.
-
-	  The setterm command ("man setterm") can be used to change the
-	  properties (such as colors or beeping) of a virtual terminal. The
-	  man page console_codes(4) ("man console_codes") contains the special
-	  character sequences that can be used to change those properties
-	  directly. The fonts used on virtual terminals can be changed with
-	  the setfont ("man setfont") command and the key bindings are defined
-	  with the loadkeys ("man loadkeys") command.
-
-	  You need at least one virtual terminal device in order to make use
-	  of your keyboard and monitor. Therefore, only people configuring an
-	  embedded system would want to say N here in order to save some
-	  memory; the only way to log into such a system is then via a serial
-	  or network connection.
-
-	  If unsure, say Y, or else you won't be able to do much with your new
-	  shiny Linux system :-)
-
-config VT_CONSOLE
-	bool "Support for console on virtual terminal"
-	depends on VT
-	---help---
-	  The system console is the device which receives all kernel messages
-	  and warnings and which allows logins in single user mode. If you
-	  answer Y here, a virtual terminal (the device used to interact with
-	  a physical terminal) can be used as system console. This is the most
-	  common mode of operations, so you should say Y here unless you want
-	  the kernel messages be output only to a serial port (in which case
-	  you should say Y to "Console on serial port", below).
-
-	  If you do say Y here, by default the currently visible virtual
-	  terminal (/dev/tty0) will be used as system console. You can change
-	  that with a kernel command line option such as "console=tty3" which
-	  would use the third virtual terminal as system console. (Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel at boot time.)
-
-	  If unsure, say Y.
-
-config HW_CONSOLE
-	bool
-	depends on VT && !S390 && !UM
-	default y
-
-config SERIAL
-	tristate "Serial (8250, 16450, 16550 or compatible) support"
-	---help---
-	  This selects whether you want to include the driver for the standard
-	  serial ports.  The standard answer is Y.  People who might say N
-	  here are those that are setting up dedicated Ethernet WWW/FTP
-	  servers, or users that have one of the various bus mice instead of a
-	  serial mouse and don't intend to use their machine's standard serial
-	  port for anything.  (Note that the Cyclades and Stallion multi
-	  serial port drivers do not need this driver built in for them to
-	  work.)
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called serial.
-	  [WARNING: Do not compile this driver as a module if you are using
-	  non-standard serial ports, since the configuration information will
-	  be lost when the driver is unloaded.  This limitation may be lifted
-	  in the future.]
-
-	  BTW1: If you have a mouseman serial mouse which is not recognized by
-	  the X window system, try running gpm first.
-
-	  BTW2: If you intend to use a software modem (also called Winmodem)
-	  under Linux, forget it.  These modems are crippled and require
-	  proprietary drivers which are only available under Windows.
-
-	  Most people will say Y or M here, so that they can use serial mice,
-	  modems and similar devices connecting to the standard serial ports.
-
-config SH_SCI
-	tristate "Serial (SCI, SCIF) support"
-	help
-	  Selecting this option will allow the Linux kernel to transfer data
-	  over SCI (Serial Communication Interface) and/or SCIF (Serial
-	  Communication Interface with FIFO) which are built into the Hitachi
-	  SuperH processor.  The option provides 1 to 3 (depending
-	  on the CPU model) standard Linux tty devices, /dev/ttySC[012]; one
-	  of these is normally used as the system console.
-
-	  If in doubt, press "y".
-
-config SERIAL_CONSOLE
-	bool "Support for console on serial port"
-	depends on SERIAL=y || SH_SCI=y
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode). This could be useful if some terminal or printer is connected
-	  to that serial port.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-	  If you don't have a VGA card installed and you say Y here, the
-	  kernel will automatically use the first serial line, /dev/ttyS0, as
-	  system console.
-
-	  If unsure, say N.
-
-comment "Unix98 PTY support"
-
-config UNIX98_PTYS
-	bool "Unix98 PTY support"
-	---help---
-	  A pseudo terminal (PTY) is a software device consisting of two
-	  halves: a master and a slave. The slave device behaves identical to
-	  a physical terminal; the master device is used by a process to
-	  read data from and write data to the slave, thereby emulating a
-	  terminal. Typical programs for the master side are telnet servers
-	  and xterms.
-
-	  Linux has traditionally used the BSD-like names /dev/ptyxx for
-	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
-	  has a number of problems. The GNU C library glibc 2.1 and later,
-	  however, supports the Unix98 naming standard: in order to acquire a
-	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
-	  terminal is then made available to the process and the pseudo
-	  terminal slave can be accessed as /dev/pts/<number>. What was
-	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
-	  The entries in /dev/pts/ are created on the fly by a virtual
-	  file system; therefore, if you say Y here you should say Y to
-	  "/dev/pts file system for Unix98 PTYs" as well.
-
-	  If you want to say Y here, you need to have the C library glibc 2.1
-	  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
-	  Read the instructions in <file:Documentation/Changes> pertaining to
-	  pseudo terminals. It's safe to say N.
-
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
-config HEARTBEAT
-	bool "Heartbeat LED"
-	depends on SH_MPC1211 || SH_CAT68701 || SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
-
-menu "Maple Bus input peripherals"
-	depends on SH_DREAMCAST && MAPLE
-
-config MAPLE_KEYBOARD
-	tristate "Maple Bus keyboard support"
-	depends on INPUT
-
-config MAPLE_MOUSE
-	tristate "Maple Bus mouse support"
-	depends on INPUT
-
-comment "Input core support is required for Maple input peripherals"
-	depends on INPUT=n
-
-endmenu
-
-config PRINTER
-	tristate "Parallel printer support"
-	depends on PARPORT
-	---help---
-	  If you intend to attach a printer to the parallel port of your Linux
-	  box (as opposed to using a serial printer; if the connector at the
-	  printer has 9 or 25 holes ["female"], then it's serial), say Y.
-	  Also read the Printing-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  It is possible to share one parallel port among several devices
-	  (e.g. printer and ZIP drive) and it is safe to compile the
-	  corresponding drivers into the kernel.
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/parport.txt>.  The module will be called lp.
-
-	  If you have several parallel ports, you can specify which ports to
-	  use with the "lp" kernel command line option.  (Try "man bootparam"
-	  or see the documentation of your boot loader (lilo or loadlin) about
-	  how to pass options to the kernel at boot time.)  The syntax of the
-	  "lp" command line option can be found in <file:drivers/char/lp.c>.
-
-	  If you have more than 8 printers, you need to increase the LP_NO
-	  macro in lp.c and the PARPORT_MAX macro in parport.h.
-
-config LP_CONSOLE
-	bool "Support for console on line printer"
-	depends on PRINTER
-	---help---
-	  If you want kernel messages to be printed out as they occur, you
-	  can have a console on the printer. This option adds support for
-	  doing that; to actually get it to happen you need to pass the
-	  option "console=lp0" to the kernel at boot time.
-
-	  If the printer is out of paper (or off, or unplugged, or too
-	  busy..) the kernel will stall until the printer is ready again.
-	  By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
-	  can make the kernel continue when this happens,
-	  but it'll lose the kernel messages.
-
-	  If unsure, say N.
-
-config PPDEV
-	tristate "Support for user-space parallel port device drivers"
-	depends on PARPORT
-	---help---
-	  Saying Y to this adds support for /dev/parport device nodes.  This
-	  is needed for programs that want portable access to the parallel
-	  port, for instance deviceid (which displays Plug-and-Play device
-	  IDs).
-
-	  This is the parallel port equivalent of SCSI generic support (sg).
-	  It is safe to say N to this -- it is not needed for normal printing
-	  or parallel port CD-ROM/disk support.
-
-	  To compile this support as a module, choose M here: the
-	  module will be called ppdev.
-
-	  If unsure, say N.
-
-config PSMOUSE
-	bool "PS/2 mouse (aka \"auxiliary device\") support"
-	---help---
-	  The PS/2 mouse connects to a special mouse port that looks much like
-	  the keyboard port (small circular connector with 6 pins). This way,
-	  the mouse does not use any serial ports. This port can also be used
-	  for other input devices like light pens, tablets, keypads. Compaq,
-	  AST and IBM all use this as their mouse port on currently shipping
-	  machines. The trackballs of some laptops are PS/2 mice also. In
-	  particular, the C&T 82C710 mouse on TI Travelmates is a PS/2 mouse.
-
-	  Although PS/2 mice are not technically bus mice, they are explained
-	  in detail in the Busmouse-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  When using a PS/2 mouse, you can get problems if you want to use the
-	  mouse both on the Linux console and under X. Using the "-R" option
-	  of the Linux mouse managing program gpm (available from
-	  <ftp://gnu.systemy.it/pub/gpm/>) solves this problem, or you can get
-	  the "mconv2" utility from <ftp://ibiblio.org/pub/Linux/system/mouse/>.
-
-source "drivers/char/watchdog/Kconfig"
-
-config RTC
-	tristate "Enhanced Real Time Clock Support"
-	---help---
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock (or hardware clock) built
-	  into your computer.
-
-	  Every PC has such a clock built in. It can be used to generate
-	  signals from as low as 1Hz up to 8192Hz, and can also be used
-	  as a 24 hour alarm. It reports status information via the file
-	  /proc/driver/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
-	  If you run Linux on a multiprocessor machine and said Y to
-	  "Symmetric Multi Processing" above, you should say Y here to read
-	  and set the RTC in an SMP compatible fashion.
-
-	  If you think you have a use for such a device (such as periodic data
-	  sampling), then say Y here, and read <file:Documentation/rtc.txt>
-	  for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rtc.
-
-source "drivers/char/pcmcia/Kconfig"
-
-source "drivers/serial/Kconfig"
-
-source "drivers/i2c/Kconfig"
- 
-endmenu
+source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/usb/Kconfig"
-
 source "arch/sh/oprofile/Kconfig"
 
 menu "Kernel hacking"

arch/sh/boards/hp6xx/hp680/mach.c

@@ -21,29 +21,33 @@
 #include <asm/irq.h>
 
 struct sh_machine_vector mv_hp680 __initmv = {
-        .mv_nr_irqs             = HD64461_IRQBASE+HD64461_IRQ_NUM,
-
-        .mv_inb                 = hd64461_inb,
-        .mv_inw                 = hd64461_inw,
-        .mv_inl                 = hd64461_inl,
-        .mv_outb                = hd64461_outb,
-        .mv_outw                = hd64461_outw,
-        .mv_outl                = hd64461_outl,
-
-        .mv_inb_p               = hd64461_inb_p,
-        .mv_inw_p               = hd64461_inw,
-        .mv_inl_p               = hd64461_inl,
-        .mv_outb_p              = hd64461_outb_p,
-        .mv_outw_p              = hd64461_outw,
-        .mv_outl_p              = hd64461_outl,
-
-        .mv_insb                = hd64461_insb,
-        .mv_insw                = hd64461_insw,
-        .mv_insl                = hd64461_insl,
-        .mv_outsb               = hd64461_outsb,
-        .mv_outsw               = hd64461_outsw,
-        .mv_outsl               = hd64461_outsl,
-
-        .mv_irq_demux           = hd64461_irq_demux,
+	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
+
+	.mv_inb = hd64461_inb,
+	.mv_inw = hd64461_inw,
+	.mv_inl = hd64461_inl,
+	.mv_outb = hd64461_outb,
+	.mv_outw = hd64461_outw,
+	.mv_outl = hd64461_outl,
+
+	.mv_inb_p = hd64461_inb_p,
+	.mv_inw_p = hd64461_inw,
+	.mv_inl_p = hd64461_inl,
+	.mv_outb_p = hd64461_outb_p,
+	.mv_outw_p = hd64461_outw,
+	.mv_outl_p = hd64461_outl,
+
+	.mv_insb = hd64461_insb,
+	.mv_insw = hd64461_insw,
+	.mv_insl = hd64461_insl,
+	.mv_outsb = hd64461_outsb,
+	.mv_outsw = hd64461_outsw,
+	.mv_outsl = hd64461_outsl,
+
+	.mv_readw = hd64461_readw,
+	.mv_writew = hd64461_writew,
+
+	.mv_irq_demux = hd64461_irq_demux,
 };
+
 ALIAS_MV(hp680)

arch/sh/boards/hp6xx/hp680/setup.c

@@ -12,6 +12,9 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <asm/hd64461/hd64461.h>
+#include <asm/io.h>
+#include <asm/hp6xx/hp6xx.h>
+#include <asm/cpu/dac.h>
 
 const char *get_system_type(void)
 {
@@ -20,8 +23,19 @@ const char *get_system_type(void)
 
 int __init platform_setup(void)
 {
-	__set_io_port_base(CONFIG_HD64461_IOBASE - HD64461_STBCR);
+	u16 v;
+	v = inw(HD64461_STBCR);
+	v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
+	    HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
+	    HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST |
+	    HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST |
+	    HD64461_STBCR_SAFECKE_IST;
+	outw(v, HD64461_STBCR);
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
+	outw(v, HD64461_GPADR);
+
+	sh_dac_disable(DAC_SPEAKER_VOLUME);
 
 	return 0;
 }
-

arch/sh/boards/se/770x/io.c

-/* $Id: io.c,v 1.4 2003/08/03 03:05:10 lethal Exp $
+/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
  *
  * linux/arch/sh/kernel/io_se.c
  *
@@ -134,25 +134,27 @@ void se_outl(unsigned int value, unsigned long port)
 void se_insb(unsigned long port, void *addr, unsigned long count)
 {
 	volatile __u16 *p = port2adr(port);
+	__u8 *ap = addr;
 
 	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
 		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
 		while (count--)
-			*((__u8 *) addr)++ = *bp;
+			*ap++ = *bp;
 	} else if (shifted_port(port)) {
 		while (count--)
-			*((__u8 *) addr)++ = *p >> 8;
+			*ap++ = *p >> 8;
 	} else {
 		while (count--)
-			*((__u8 *) addr)++ = *p;
+			*ap++ = *p;
 	}
 }
 
 void se_insw(unsigned long port, void *addr, unsigned long count)
 {
 	volatile __u16 *p = port2adr(port);
+	__u16 *ap = addr;
 	while (count--)
-		*((__u16 *) addr)++ = *p;
+		*ap++ = *p;
 }
 
 void se_insl(unsigned long port, void *addr, unsigned long count)
@@ -163,25 +165,27 @@ void se_insl(unsigned long port, void *addr, unsigned long count)
 void se_outsb(unsigned long port, const void *addr, unsigned long count)
 {
 	volatile __u16 *p = port2adr(port);
+	const __u8 *ap = addr;
 
 	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
 		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); 
 		while (count--)
-			*bp = *((__u8 *) addr)++;
+			*bp = *ap++;
 	} else if (shifted_port(port)) {
 		while (count--)
-			*p = *((__u8 *) addr)++ << 8;
+			*p = *ap++ << 8;
 	} else {
 		while (count--)
-			*p = *((__u8 *) addr)++;
+			*p = *ap++;
 	}
 }
 
 void se_outsw(unsigned long port, const void *addr, unsigned long count)
 {
 	volatile __u16 *p = port2adr(port);
+	const __u16 *ap = addr;
 	while (count--)
-		*p = *((__u16 *) addr)++;
+		*p = *ap++;
 }
 
 void se_outsl(unsigned long port, const void *addr, unsigned long count)

arch/sh/boards/se/770x/irq.c

-/* $Id: irq.c,v 1.1.2.2 2002/10/29 00:56:09 lethal Exp $
+/* $Id: irq.c,v 1.4 2004/02/22 22:44:36 kkojima Exp $
  * 
  * linux/arch/sh/boards/se/770x/irq.c
  *
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/irq.h>
-#include <asm/hitachi_se.h>
+#include <asm/se/se.h>
 
 /*
  * Initialize IRQ setting

arch/sh/cchips/Kconfig

+menu "Companion Chips"
+
 # A board must have defined HD6446X_SERIES in order to see these
+config HD6446X_SERIES
+	bool "HD6446x support"
+	default n
+
 choice
 	prompt "HD6446x options"
-	depends HD6446X_SERIES
+	depends on HD6446X_SERIES
 	default HD64461
 
 config HD64461
@@ -73,4 +79,5 @@ config HD64465_IRQ
 
 	  Do not change this unless you know what you are doing.
 
+endmenu
 

arch/sh/cchips/hd6446x/hd64461/io.c

 /*
- *	$Id: io.c,v 1.5 2004/02/01 19:46:04 lethal Exp $
+ *	$Id: io.c,v 1.6 2004/03/16 00:07:50 lethal Exp $
  *	Copyright (C) 2000 YAEGASHI Takeshi
  *	Typical I/O routines for HD64461 system.
  */
@@ -8,6 +8,8 @@
 #include <asm/io.h>
 #include <asm/hd64461/hd64461.h>
 
+#define MEM_BASE (CONFIG_HD64461_IOBASE - HD64461_STBCR)
+
 static __inline__ unsigned long PORT2ADDR(unsigned long port)
 {
 	/* 16550A: HD64461 internal */
@@ -36,7 +38,9 @@ static __inline__ unsigned long PORT2ADDR(unsigned long port)
 #endif
 
 	/* ??? */
-	if (port < 0x10000) return 0xa0000000 + port;
+	if (port < 0xf000) return 0xa0000000 + port;
+	/* PCMCIA channel 0, I/O (0xba000000) */
+	if (port < 0x10000) return 0xba000000 + port - 0xf000;
 
 	/* HD64461 internal devices (0xb0000000) */
 	if (port < 0x20000) return CONFIG_HD64461_IOBASE + port - 0x10000;
@@ -140,3 +144,14 @@ void hd64461_outsl(unsigned long port, const void *buffer, unsigned long count)
 	const unsigned long *buf=buffer;
 	while(count--) *addr=*buf++;
 }
+
+unsigned short hd64461_readw(unsigned long addr)
+{
+	return *(volatile unsigned short*)(MEM_BASE+addr);
+}
+
+void hd64461_writew(unsigned short b, unsigned long addr)
+{
+	*(volatile unsigned short*)(MEM_BASE+addr) = b;
+}
+

arch/sh/cchips/hd6446x/hd64461/setup.c

 /*
- *	$Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $
+ *	$Id: setup.c,v 1.5 2004/03/16 00:07:50 lethal Exp $
  *	Copyright (C) 2000 YAEGASHI Takeshi
  *	Hitachi HD64461 companion chip support
  */
 
 #include <linux/config.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/interrupt.h>
@@ -30,7 +31,6 @@ static void disable_hd64461_irq(unsigned int irq)
 	local_irq_restore(flags);
 }
 
-
 static void enable_hd64461_irq(unsigned int irq)
 {
 	unsigned long flags;
@@ -44,7 +44,6 @@ static void enable_hd64461_irq(unsigned int irq)
 	local_irq_restore(flags);
 }
 
-
 static void mask_and_ack_hd64461(unsigned int irq)
 {
 	disable_hd64461_irq(irq);
@@ -54,27 +53,23 @@ static void mask_and_ack_hd64461(unsigned int irq)
 #endif
 }
 
-
 static void end_hd64461_irq(unsigned int irq)
 {
 	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
 		enable_hd64461_irq(irq);
 }
 
-
 static unsigned int startup_hd64461_irq(unsigned int irq)
-{ 
+{
 	enable_hd64461_irq(irq);
 	return 0;
 }
 
-
 static void shutdown_hd64461_irq(unsigned int irq)
 {
 	disable_hd64461_irq(irq);
 }
 
-
 static struct hw_interrupt_type hd64461_irq_type = {
 	.typename	= "HD64461-IRQ",
 	.startup	= startup_hd64461_irq,
@@ -85,7 +80,6 @@ static struct hw_interrupt_type hd64461_irq_type = {
 	.end		= end_hd64461_irq,
 };
 
-
 static irqreturn_t hd64461_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	printk(KERN_INFO
@@ -95,23 +89,52 @@ static irqreturn_t hd64461_interrupt(int irq, void *dev_id, struct pt_regs *regs
 	return IRQ_NONE;
 }
 
+static struct {
+	int (*func) (int, void *);
+	void *dev;
+} hd64461_demux[HD64461_IRQ_NUM];
+
+void hd64461_register_irq_demux(int irq,
+				int (*demux) (int irq, void *dev), void *dev)
+{
+	hd64461_demux[irq - HD64461_IRQBASE].func = demux;
+	hd64461_demux[irq - HD64461_IRQBASE].dev = dev;
+}
+
+EXPORT_SYMBOL(hd64461_register_irq_demux);
+
+void hd64461_unregister_irq_demux(int irq)
+{
+	hd64461_demux[irq - HD64461_IRQBASE].func = 0;
+}
+
+EXPORT_SYMBOL(hd64461_unregister_irq_demux);
+
 int hd64461_irq_demux(int irq)
 {
 	if (irq == CONFIG_HD64461_IRQ) {
 		unsigned short bit;
 		unsigned short nirr = inw(HD64461_NIRR);
 		unsigned short nimr = inw(HD64461_NIMR);
+		int i;
+
 		nirr &= ~nimr;
-		for (bit = 1, irq = 0; irq < 16; bit <<= 1, irq++)
-			if (nirr & bit) break;
-		if (irq == 16) irq = CONFIG_HD64461_IRQ;
-		else irq += HD64461_IRQBASE;
+		for (bit = 1, i = 0; i < 16; bit <<= 1, i++)
+			if (nirr & bit)
+				break;
+		if (i == 16)
+			irq = CONFIG_HD64461_IRQ;
+		else {
+			irq = HD64461_IRQBASE + i;
+			if (hd64461_demux[i].func != 0) {
+				irq = hd64461_demux[i].func(irq, hd64461_demux[i].dev);
+			}
+		}
 	}
 	return __irq_demux(irq);
 }
 
-static struct irqaction irq0  = { hd64461_interrupt, SA_INTERRUPT, 0, "HD64461", NULL, NULL};
-
+static struct irqaction irq0 = { hd64461_interrupt, SA_INTERRUPT, 0, "HD64461", NULL, NULL };
 
 int __init setup_hd64461(void)
 {
@@ -120,11 +143,12 @@ int __init setup_hd64461(void)
 	if (!MACH_HD64461)
 		return 0;
 
-	printk(KERN_INFO "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
-	       CONFIG_HD64461_IOBASE, CONFIG_HD64461_IRQ,
-	       HD64461_IRQBASE, HD64461_IRQBASE+15);
+	printk(KERN_INFO
+	       "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
+	       CONFIG_HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
+	       HD64461_IRQBASE + 15);
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7709) /* Should be at processor specific part.. */
+#if defined(CONFIG_CPU_SUBTYPE_SH7709)	/* Should be at processor specific part.. */
 	outw(0x2240, INTC_ICR1);
 #endif
 	outw(0xffff, HD64461_NIMR);

arch/sh/kernel/cf-enabler.c

-/* $Id: cf-enabler.c,v 1.3 2003/05/04 19:29:52 lethal Exp $
+/* $Id: cf-enabler.c,v 1.4 2004/02/22 22:44:36 kkojima Exp $
  *
  *  linux/drivers/block/cf-enabler.c
  *
@@ -88,7 +88,7 @@ static int __init cf_init_default(void)
 }
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/hitachi_se.h>
+#include <asm/se/se.h>
 
 /*
  * SolutionEngine

arch/sh/kernel/cpu/irq_ipr.c

@@ -196,6 +196,7 @@ void __init init_IRQ(void)
 #endif
 
 	make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
+	make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY);
 	make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
 
 #ifdef SCI_ERI_IRQ

arch/sh/kernel/cpu/sh4/sq.c

@@ -3,13 +3,13 @@
  *
  * General management API for SH-4 integrated Store Queues
  *
- * Copyright (C) 2001, 2002, 2003  Paul Mundt
+ * Copyright (C) 2001, 2002, 2003, 2004  Paul Mundt
  * Copyright (C) 2001, 2002  M. R. Brown
  *
  * Some of this code has been adopted directly from the old arch/sh/mm/sq.c
- * hack that was part of the LinuxDC project. For all intensive purposes, this
- * is a completely new interface that really doesn't have much in common with
- * the old zone-based approach at all. Infact, I'm only listing it here for
+ * hack that was part of the LinuxDC project. For all intents and purposes,
+ * this is a completely new interface that really doesn't have much in common
+ * with the old zone-based approach at all. In fact, it's only listed here for
  * general completeness.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -24,6 +24,7 @@
 #include <linux/list.h>
 #include <linux/proc_fs.h>
 #include <linux/miscdevice.h>
+#include <linux/vmalloc.h>
 
 #include <asm/io.h>
 #include <asm/page.h>
@@ -31,6 +32,9 @@
 #include <asm/cpu/sq.h>
 
 static LIST_HEAD(sq_mapping_list);
+static spinlock_t sq_mapping_lock = SPIN_LOCK_UNLOCKED;
+
+extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags, unsigned long start, unsigned long end);
 
 /**
  * sq_flush - Flush (prefetch) the store queue cache
@@ -42,7 +46,7 @@ static LIST_HEAD(sq_mapping_list);
  */
 inline void sq_flush(void *addr)
 {
-	__asm__ __volatile__ ("pref @%0": "=r" (addr) : : "memory");
+	__asm__ __volatile__ ("pref @%0" : : "r" (addr) : "memory");
 }
 
 /**
@@ -57,13 +61,17 @@ inline void sq_flush(void *addr)
 void sq_flush_range(unsigned long start, unsigned int len)
 {
 	volatile unsigned long *sq = (unsigned long *)start;
+	unsigned long dummy;
 
 	/* Flush the queues */
 	for (len >>= 5; len--; sq += 8)
 		sq_flush((void *)sq);
-	
+
 	/* Wait for completion */
-	sq = (volatile unsigned long *)start;
+	dummy = ctrl_inl(P4SEG_STORE_QUE);
+
+	ctrl_outl(0, P4SEG_STORE_QUE + 0);
+	ctrl_outl(0, P4SEG_STORE_QUE + 8);
 }
 
 static struct sq_mapping *__sq_alloc_mapping(unsigned long virt, unsigned long phys, unsigned long size, const char *name)
@@ -81,7 +89,7 @@ static struct sq_mapping *__sq_alloc_mapping(unsigned long virt, unsigned long p
 
 	map->sq_addr	= virt;
 	map->addr	= phys;
-	map->size	= size;
+	map->size	= size + 1;
 	map->name	= name;
 
 	list_add(&map->list, &sq_mapping_list);
@@ -128,24 +136,20 @@ static unsigned long __sq_get_next_addr(void)
  */
 static struct sq_mapping *__sq_remap(struct sq_mapping *map)
 {
-	/*
-	 * First check the MMU status..
-	 */
-#ifndef CONFIG_MMU
+	unsigned long flags, pteh, ptel;
+	struct vm_struct *vma;
+	pgprot_t pgprot;
+
 	/*
 	 * Without an MMU (or with it turned off), this is much more
 	 * straightforward, as we can just load up each queue's QACR with
 	 * the physical address appropriately masked.
 	 */
+
 	ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
 	ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
-#else
-	unsigned long flags, pteh, ptel;
-	pgprot_t pgprot;
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
 
+#ifdef CONFIG_MMU
 	/*
 	 * With an MMU on the other hand, things are slightly more involved.
 	 * Namely, we have to have a direct mapping between the SQ addr and
@@ -161,7 +165,7 @@ static struct sq_mapping *__sq_remap(struct sq_mapping *map)
 	 * We could also probably get by without explicitly setting PTEA, but
 	 * we do it here just for good measure.
 	 */
-	local_irq_save(flags);
+	spin_lock_irqsave(&sq_mapping_lock, flags);
 
 	pteh = map->sq_addr;
 	ctrl_outl((pteh & MMU_VPN_MASK) | get_asid(), MMU_PTEH);
@@ -177,6 +181,8 @@ static struct sq_mapping *__sq_remap(struct sq_mapping *map)
 
 	__asm__ __volatile__ ("ldtlb" : : : "memory");
 
+	spin_unlock_irqrestore(&sq_mapping_lock, flags);
+
 	/*
 	 * Next, we need to map ourselves in the kernel page table, so that
 	 * future accesses after a TLB flush will be handled when we take a
@@ -188,31 +194,17 @@ static struct sq_mapping *__sq_remap(struct sq_mapping *map)
 	 * writeout before we hit the TLB flush, we do it anyways. This way
 	 * we at least save ourselves the initial page fault overhead.
 	 */
-	pgd = pgd_offset_k(map->sq_addr);
+	vma = __get_vm_area(map->size, VM_ALLOC, map->sq_addr, SQ_ADDRMAX);
+	if (!vma)
+		return ERR_PTR(-ENOMEM);
 
-	spin_lock(&init_mm.page_table_lock);
+	vma->phys_addr = map->addr;
 
-	pmd = pmd_alloc(&init_mm, pgd, map->sq_addr);
-	if (!pmd)
-		goto out;
-	
-	pte = pte_alloc_map(&init_mm, pmd, map->sq_addr);
-	if (!pte)
-		goto out;
-	if (!pte_none(*pte)) {
-		pte_unmap(pte);
-		goto out;
+	if (remap_area_pages((unsigned long)vma->addr, vma->phys_addr,
+			     map->size, pgprot_val(pgprot))) {
+		vunmap(vma->addr);
+		return NULL;
 	}
-
-	set_pte(pte, mk_pte(phys_to_page(map->addr), pgprot));
-	pte_unmap(pte);
-
-out:
-	spin_unlock(&init_mm.page_table_lock);
-	sq_flush((void *)pteh);
-
-	local_irq_restore(flags);
-
 #endif /* CONFIG_MMU */
 
 	return map;
@@ -236,11 +228,20 @@ static struct sq_mapping *__sq_remap(struct sq_mapping *map)
 struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *name)
 {
 	struct sq_mapping *map;
-	unsigned long virt;
+	unsigned long virt, end;
 	unsigned int psz;
 
+	/* Don't allow wraparound or zero size */
+	end = phys + size - 1;
+	if (!size || end < phys)
+		return NULL;
+	/* Don't allow anyone to remap normal memory.. */
+	if (phys < virt_to_phys(high_memory))
+		return NULL;
+
 	phys &= PAGE_MASK;
 
+	size  = PAGE_ALIGN(end + 1) - phys;
 	virt  = __sq_get_next_addr();
 	psz   = (size + (PAGE_SIZE - 1)) / PAGE_SIZE;
 	map   = __sq_alloc_mapping(virt, phys, size, name);
@@ -264,30 +265,8 @@ struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *n
  */
 void sq_unmap(struct sq_mapping *map)
 {
-#ifdef CONFIG_MMU
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	
-	pgd = pgd_offset_k(map->sq_addr);
-	pmd = pmd_offset(pgd, map->sq_addr);
-
-	if (pmd_none(*pmd))
-		return;
-	if (pmd_bad(*pmd)) {
-		pmd_ERROR(*pmd);
-		pmd_clear(pmd);
-		return;
-	}
-
-	pte = pte_offset_kernel(pmd, map->sq_addr);
-	if (pte_none(*pte) || pte_not_present(*pte))
-		return;
-
-	ptep_get_and_clear(pte);
-
-	__flush_tlb_page(get_asid(), map->sq_addr & PAGE_MASK);
-#endif
+	if (map->sq_addr > (unsigned long)high_memory)
+		vfree((void *)(map->sq_addr & PAGE_MASK));
 
 	list_del(&map->list);
 	kfree(map);
@@ -475,6 +454,7 @@ module_exit(sq_api_exit);
 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>");
 MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(STORE_QUEUE_MINOR);
 
 EXPORT_SYMBOL(sq_remap);
 EXPORT_SYMBOL(sq_unmap);

arch/sh/kernel/entry.S

-/* $Id: entry.S,v 1.34 2004/01/13 05:52:11 kkojima Exp $
+/* $Id: entry.S,v 1.35 2004/02/21 14:45:47 lethal Exp $
  *
  *  linux/arch/sh/entry.S
  *
@@ -1129,9 +1129,6 @@ ENTRY(sys_call_table)
 	.long sys_utimes
  	.long sys_fadvise64_64_wrapper
 	.long sys_ni_syscall	/* Reserved for vserver */
-
-	.rept NR_syscalls-(.-sys_call_table)/4
-		.long sys_ni_syscall
-	.endr
+	.long sys_ni_syscall
 
 /* End of entry.S */

arch/sh/kernel/io.c

@@ -16,10 +16,11 @@
  */
 void  memcpy_fromio(void * to, unsigned long from, unsigned long count)
 {
+	char *p = to;
         while (count) {
                 count--;
-                *(char *) to = readb(from);
-                ((char *) to)++;
+                *p = readb(from);
+                p++;
                 from++;
         }
 }
@@ -30,10 +31,11 @@ void  memcpy_fromio(void * to, unsigned long from, unsigned long count)
  */
 void  memcpy_toio(unsigned long to, const void * from, unsigned long count)
 {
+	const char *p = from;
         while (count) {
                 count--;
-                writeb(*(char *) from, to);
-                ((char *) from)++;
+                writeb(*p, to);
+                p++;
                 to++;
         }
 }

arch/sh/kernel/module.c

@@ -55,20 +55,22 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
 #define COPY_UNALIGNED_WORD(sw, tw, align) \
 { \
 	void *__s = &(sw), *__t = &(tw); \
+	unsigned short *__s2 = __s, *__t2 = __t; \
+	unsigned char *__s1 = __s, *__t1 = __t; \
 	switch ((align)) \
 	{ \
 	case 0: \
 		*(unsigned long *) __t = *(unsigned long *) __s; \
 		break; \
 	case 2: \
-		*((unsigned short *) __t)++ = *((unsigned short *) __s)++; \
-		*((unsigned short *) __t) = *((unsigned short *) __s); \
+		*__t2++ = *__s2++; \
+		*__t2 = *__s2; \
 		break; \
 	default: \
-		*((unsigned char *) __t)++ = *((unsigned char *) __s)++; \
-		*((unsigned char *) __t)++ = *((unsigned char *) __s)++; \
-		*((unsigned char *) __t)++ = *((unsigned char *) __s)++; \
-		*((unsigned char *) __t) = *((unsigned char *) __s); \
+		*__t1++ = *__s1++; \
+		*__t1++ = *__s1++; \
+		*__t1++ = *__s1++; \
+		*__t1 = *__s1; \
 		break; \
 	} \
 }

arch/sh/kernel/process.c

-/* $Id: process.c,v 1.25 2004/01/13 05:52:11 kkojima Exp $
+/* $Id: process.c,v 1.26 2004/02/06 14:14:14 kkojima Exp $
  *
  *  linux/arch/sh/kernel/process.c
  *
@@ -254,6 +254,13 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 		struct task_struct *p, struct pt_regs *regs)
 {
 	struct pt_regs *childregs;
+#if defined(CONFIG_CPU_SH4)
+	struct task_struct *tsk = current;
+
+	unlazy_fpu(tsk, regs);
+	p->thread.fpu = tsk->thread.fpu;
+	p->used_math = tsk->used_math;
+#endif
 
 	childregs = ((struct pt_regs *)
 		(THREAD_SIZE + (unsigned long) p->thread_info)
@@ -279,16 +286,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 
 	p->thread.ubc_pc = 0;
 
-#if defined(CONFIG_CPU_SH4)
-	{
-		struct task_struct *tsk = current;
-
-		unlazy_fpu(tsk, regs);
-		p->thread.fpu = tsk->thread.fpu;
-		p->used_math = tsk->used_math;
-		clear_ti_thread_flag(p->thread_info, TIF_USEDFPU);
-	}
-#endif
 	return 0;
 }
 

arch/sh/kernel/sh_ksyms.c

@@ -113,3 +113,5 @@ EXPORT_SYMBOL(__down_trylock);
 #ifdef CONFIG_SMP
 EXPORT_SYMBOL(synchronize_irq);
 #endif
+
+EXPORT_SYMBOL(csum_partial);

arch/sh/kernel/sys_sh.c

@@ -44,7 +44,7 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 	return error;
 }
 
-#if defined(CONFIG_CPU_SH4)
+#if defined(HAVE_ARCH_UNMAPPED_AREA)
 /*
  * To avoid cache alias, we map the shard page with same color.
  */
@@ -53,7 +53,9 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	unsigned long len, unsigned long pgoff, unsigned long flags)
 {
+	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
+	unsigned long start_addr;
 
 	if (flags & MAP_FIXED) {
 		/* We do not accept a shared mapping if it would violate
@@ -66,20 +68,44 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 
 	if (len > TASK_SIZE)
 		return -ENOMEM;
-	if (!addr)
-		addr = TASK_UNMAPPED_BASE;
 
+	if (addr) {
+		if (flags & MAP_PRIVATE)
+			addr = PAGE_ALIGN(addr);
+		else
+			addr = COLOUR_ALIGN(addr);
+		vma = find_vma(mm, addr);
+		if (TASK_SIZE - len >= addr &&
+		    (!vma || addr + len <= vma->vm_start))
+			return addr;
+	}
 	if (flags & MAP_PRIVATE)
-		addr = PAGE_ALIGN(addr);
+		addr = PAGE_ALIGN(mm->free_area_cache);
 	else
-		addr = COLOUR_ALIGN(addr);
+		addr = COLOUR_ALIGN(mm->free_area_cache);
+	start_addr = addr;
 
-	for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {
+full_search:
+	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
 		/* At this point:  (!vma || addr < vma->vm_end). */
-		if (TASK_SIZE - len < addr)
+		if (TASK_SIZE - len < addr) {
+			/*
+			 * Start a new search - just in case we missed
+			 * some holes.
+			 */
+			if (start_addr != TASK_UNMAPPED_BASE) {
+				start_addr = addr = TASK_UNMAPPED_BASE;
+				goto full_search;
+			}
 			return -ENOMEM;
-		if (!vma || addr + len <= vma->vm_start)
+		}
+		if (!vma || addr + len <= vma->vm_start) {
+			/*
+			 * Remember the place where we stopped the search:
+			 */
+			mm->free_area_cache = addr + len;
 			return addr;
+		}
 		addr = vma->vm_end;
 		if (!(flags & MAP_PRIVATE))
 			addr = COLOUR_ALIGN(addr);

arch/sh/kernel/time.c

-/* $Id: time.c,v 1.18 2003/10/09 16:28:14 lethal Exp $
+/* $Id: time.c,v 1.19 2004/02/27 00:40:48 lethal Exp $
  *
  *  linux/arch/sh/kernel/time.c
  *
@@ -86,10 +86,14 @@ int (*rtc_set_time)(const time_t) = 0;
 #endif
 
 #if defined(CONFIG_CPU_SH3)
-#error "FIXME"
-static int ifc_table[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
-static int pfc_table[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
-static int stc_table[] = { 1, 2, 4, 8, 3, 6, 1, 1 };
+static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int stc_values[]      = { 0, 1, 4, 2, 5, 0, 0, 0 };
+#define bfc_divisors stc_multipliers
+#define bfc_values stc_values
+static int ifc_divisors[]    = { 1, 2, 3, 4, 1, 1, 1, 1 };
+static int ifc_values[]      = { 0, 1, 4, 2, 0, 0, 0, 0 };
+static int pfc_divisors[]    = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int pfc_values[]      = { 0, 1, 4, 2, 5, 0, 0, 0 };
 #elif defined(CONFIG_CPU_SH4)
 static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
 static int ifc_values[]   = { 0, 1, 2, 3, 0, 4, 0, 5 };
@@ -398,13 +402,13 @@ void get_current_frequency_divisors(unsigned int *ifc, unsigned int *bfc, unsign
 
 	tmp  = (frqcr & 0x8000) >> 13;
 	tmp |= (frqcr & 0x0030) >>  4;
-	*bfc = stc_table[tmp];
+	*bfc = stc_multipliers[tmp];
 	tmp  = (frqcr & 0x4000)  >> 12;
 	tmp |= (frqcr & 0x000c) >> 2;
-	*ifc  = ifc_table[tmp];
+	*ifc = ifc_divisors[tmp];
 	tmp  = (frqcr & 0x2000) >> 11;
 	tmp |= frqcr & 0x0003;
-	*pfc = pfc_table[tmp];
+	*pfc = pfc_divisors[tmp];
 #elif defined(CONFIG_CPU_SH4)
 	*ifc = ifc_divisors[(frqcr >> 6) & 0x0007];
 	*bfc = bfc_divisors[(frqcr >> 3) & 0x0007];

arch/sh/kernel/traps.c

-/* $Id: traps.c,v 1.14 2003/11/14 18:40:10 lethal Exp $
+/* $Id: traps.c,v 1.16 2004/03/16 00:10:54 lethal Exp $
  *
  *  linux/arch/sh/traps.c
  *
@@ -656,6 +656,10 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 	unsigned long module_end = VMALLOC_END;
 	int i = 1;
 
+	if (tsk && !sp) {
+		sp = (unsigned long *)tsk->thread.sp;
+	}
+
 	if (!sp) {
 		__asm__ __volatile__ (
 			"mov r15, %0\n\t"

arch/sh/mm/cache-sh4.c

-/* $Id: cache-sh4.c,v 1.24 2003/10/12 19:40:12 lethal Exp $
+/* $Id: cache-sh4.c,v 1.26 2004/02/19 12:47:24 lethal Exp $
  *
  *  linux/arch/sh/mm/cache-sh4.c
  *
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- * Copyright (C) 2001, 2002, 2003  Paul Mundt
+ * Copyright (C) 2001, 2002, 2003, 2004  Paul Mundt
+ * Copyright (C) 2003  Richard Curnow
  */
 
 #include <linux/config.h>
@@ -29,10 +30,20 @@ static void __flush_dcache_all_ex(void);
 
 int __init detect_cpu_and_cache_system(void)
 {
-	unsigned long pvr, prr, ccr;
+	unsigned long pvr, prr, ccr, cvr;
+	unsigned long size;
+
+	static unsigned long sizes[16] = {
+		[1] = (1 << 12),
+		[2] = (1 << 13),
+		[4] = (1 << 14),
+		[8] = (1 << 15),
+		[9] = (1 << 16)
+	};
 
 	pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffff;
 	prr = (ctrl_inl(CCN_PRR) >> 4) & 0xff;
+	cvr = (ctrl_inl(CCN_CVR));
 
 	/*
 	 * Setup some sane SH-4 defaults for the icache
@@ -54,6 +65,9 @@ int __init detect_cpu_and_cache_system(void)
 	cpu_data->dcache.ways		= 1;
 	cpu_data->dcache.linesz		= L1_CACHE_BYTES;
 
+	/* Set the FPU flag, virtually all SH-4's have one */
+	set_bit(CPU_HAS_FPU, &(cpu_data->flags));
+
 	/*
 	 * Probe the underlying processor version/revision and
 	 * adjust cpu_data setup accordingly.
@@ -68,7 +82,7 @@ int __init detect_cpu_and_cache_system(void)
 
 		/* 
 		 * FIXME: This is needed for 7750, but do we need it for the
-		 * 7750S and 7750R too? For now, assume we do.. -- PFM
+		 * 7750S too? For now, assume we do.. -- PFM
 		 */
 		set_bit(CPU_HAS_P2_FLUSH_BUG, &(cpu_data->flags));
 
@@ -83,12 +97,18 @@ int __init detect_cpu_and_cache_system(void)
 		cpu_data->type = CPU_ST40GX1;
 		break;
 	case 0x700:
-		/* XXX: Add proper CVR probing */
 		cpu_data->type = CPU_SH4_501;
+		cpu_data->icache.ways = 2;
+		cpu_data->dcache.ways = 2;
+
+		/* No FPU on the SH4-500 series.. */
+		clear_bit(CPU_HAS_FPU, &(cpu_data->flags));
 		break;
 	case 0x600:
 		cpu_data->type = CPU_SH4_202;
-		/* fall */
+		cpu_data->icache.ways = 2;
+		cpu_data->dcache.ways = 2;
+		break;
 	case 0x500 ... 0x501:
 		switch (prr) {
 		    case 0x10: cpu_data->type = CPU_SH7750R; break;
@@ -96,9 +116,20 @@ int __init detect_cpu_and_cache_system(void)
 		    case 0x50: cpu_data->type = CPU_SH7760;  break;
 		}
 
-		if (cpu_data->type == CPU_SH7750R)
-			set_bit(CPU_HAS_P2_FLUSH_BUG, &(cpu_data->flags));
+		cpu_data->icache.ways = 2;
+		cpu_data->dcache.ways = 2;
 
+		break;
+	default:
+		cpu_data->type = CPU_SH_NONE;
+		break;
+	}
+
+	/*
+	 * On anything that's not a direct-mapped cache, look to the CVR
+	 * for I/D-cache specifics.
+	 */
+	if (cpu_data->dcache.ways > 1) {
 		jump_to_P2();
 		ccr = ctrl_inl(CCR);
 
@@ -110,19 +141,17 @@ int __init detect_cpu_and_cache_system(void)
 
 		back_to_P1();
 
-		cpu_data->icache.ways = 2;
-		cpu_data->dcache.ways = 2;
+		size = sizes[(cvr >> 20) & 0xf];
+		cpu_data->icache.way_shift	=  (size >> 1);
+		cpu_data->icache.entry_mask	= ((size >> 2) - (1 << 5));
+		cpu_data->icache.sets		=  (size >> 6);
 
-		break;
-	default:
-		cpu_data->type = CPU_SH_NONE;
-		break;
+		size = sizes[(cvr >> 16) & 0xf];
+		cpu_data->dcache.way_shift	=  (size >> 1);
+		cpu_data->dcache.entry_mask	= ((size >> 2) - (1 << 5));
+		cpu_data->dcache.sets		=  (size >> 6);
 	}
 
-	/* No FPU on the SH4-500 series.. */
-	if (cpu_data->type != CPU_SH4_501)
-		set_bit(CPU_HAS_FPU, &(cpu_data->flags));
-
 	return 0;
 }
 
@@ -419,7 +448,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 			}
 			pte++;
 			p += PAGE_SIZE;
-		} while (p < end && (unsigned long)pte & PAGE_MASK);
+		} while (p < end && ((unsigned long)pte & ~PAGE_MASK));
 		pmd++;
 	} while (p < end);
  loop_exit:

arch/sh/mm/init.c

-/* $Id: init.c,v 1.18 2003/10/31 09:26:59 kkojima Exp $
+/* $Id: init.c,v 1.19 2004/02/21 04:42:16 kkojima Exp $
  *
  *  linux/arch/sh/mm/init.c
  *
@@ -174,6 +174,7 @@ void __init mem_init(void)
 	extern unsigned long empty_zero_page[1024];
 	int codesize, reservedpages, datasize, initsize;
 	int tmp;
+	extern unsigned long memory_start;
 
 #ifdef CONFIG_MMU
 	high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE);
@@ -183,7 +184,7 @@ void __init mem_init(void)
 	high_memory = (void *)(memory_end & PAGE_MASK);
 #endif
 
-	max_mapnr = num_physpages = MAP_NR(high_memory);
+	max_mapnr = num_physpages = MAP_NR(high_memory) - MAP_NR(memory_start);
 
 	/* clear the zero-page */
 	memset(empty_zero_page, 0, PAGE_SIZE);

arch/sh/mm/ioremap.c

-/* $Id: ioremap.c,v 1.8 2003/10/09 15:25:42 lethal Exp $
+/* $Id: ioremap.c,v 1.9 2004/02/25 04:59:10 lethal Exp $
  *
  * arch/sh/mm/ioremap.c
  *
@@ -160,5 +160,5 @@ void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long fla
 void p3_iounmap(void *addr)
 {
 	if (addr > high_memory)
-		return vfree((void *) (PAGE_MASK & (unsigned long) addr));
+		vfree((void *)(PAGE_MASK & (unsigned long)addr));
 }

drivers/char/watchdog/shwdt.c

@@ -412,7 +412,7 @@ static int __init sh_wdt_init(void)
 		return rc;
 	}
 
-	rc = misc_register(&sh_wdt_miscdev)
+	rc = misc_register(&sh_wdt_miscdev);
 	if (rc) {
 		printk(KERN_ERR PFX "Can't register miscdev on minor=%d (err=%d)\n",
 			sh_wdt_miscdev.minor, rc);

drivers/input/keyboard/maple_keyb.c

 /*
- *	$Id: maple_keyb.c,v 1.1 2001/11/02 17:27:32 jsimmons Exp $
+ *	$Id: maple_keyb.c,v 1.4 2004/03/22 01:18:15 lethal Exp $
  * 	SEGA Dreamcast keyboard driver
  *	Based on drivers/usb/usbkbd.c
  */
@@ -125,8 +125,11 @@ static int dc_kbd_connect(struct maple_device *dev)
 
 	kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
 
+	init_input_dev(&kbd->dev);
+
 	for (i=0; i<255; i++)
 		set_bit(dc_kbd_keycode[i], kbd->dev.keybit);
+
 	clear_bit(0, kbd->dev.keybit);
 
 	kbd->dev.private = kbd;
@@ -141,10 +144,7 @@ static int dc_kbd_connect(struct maple_device *dev)
 
 	maple_getcond_callback(dev, dc_kbd_callback, 1, MAPLE_FUNC_KEYBOARD);
 
-	printk(KERN_INFO "input%d: keyboard(0x%lx): %s\n",
-	       kbd->dev.number, data, kbd->dev.name);
-
-	MOD_INC_USE_COUNT;
+	printk(KERN_INFO "input: keyboard(0x%lx): %s\n", data, kbd->dev.name);
 
 	return 0;
 }
@@ -155,10 +155,7 @@ static void dc_kbd_disconnect(struct maple_device *dev)
 	struct dc_kbd *kbd = dev->private_data;
 
 	input_unregister_device(&kbd->dev);
-
 	kfree(kbd);
-
-	MOD_DEC_USE_COUNT;
 }
 
 

drivers/input/mouse/maplemouse.c

 /*
- *	$Id: maplemouse.c,v 1.1 2001/11/02 17:27:32 jsimmons Exp $
+ *	$Id: maplemouse.c,v 1.2 2004/03/22 01:18:15 lethal Exp $
  * 	SEGA Dreamcast mouse driver
  *	Based on drivers/usb/usbmouse.c
  */
@@ -74,22 +74,21 @@ static int dc_mouse_connect(struct maple_device *dev)
 	mouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
 	mouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL);
 
+	init_input_dev(&mouse->dev);
+
 	mouse->dev.private = mouse;
 	mouse->dev.open = dc_mouse_open;
 	mouse->dev.close = dc_mouse_close;
 	mouse->dev.event = NULL;
 
 	mouse->dev.name = dev->product_name;
-	mouse->dev.idbus = BUS_MAPLE;
+	mouse->dev.id.bustype = BUS_MAPLE;
 	
 	input_register_device(&mouse->dev);
 
 	maple_getcond_callback(dev, dc_mouse_callback, 1, MAPLE_FUNC_MOUSE);
 
-	printk(KERN_INFO "input%d: mouse(0x%lx): %s\n",
-	       mouse->dev.number, data, mouse->dev.name);
-
-	MOD_INC_USE_COUNT;
+	printk(KERN_INFO "input: mouse(0x%lx): %s\n", data, mouse->dev.name);
 
 	return 0;
 }
@@ -100,10 +99,7 @@ static void dc_mouse_disconnect(struct maple_device *dev)
 	struct dc_mouse *mouse = dev->private_data;
 
 	input_unregister_device(&mouse->dev);
-
 	kfree(mouse);
-
-	MOD_DEC_USE_COUNT;
 }
 
 

drivers/net/stnic.c

@@ -20,7 +20,7 @@
 
 #include <asm/system.h>
 #include <asm/io.h>
-#include <asm/hitachi_se.h>
+#include <asm/se/se.h>
 #include <asm/machvec.h>
 #ifdef CONFIG_SH_STANDARD_BIOS 
 #include <asm/sh_bios.h>

include/asm-sh/cpu-sh3/cacheflush.h

@@ -37,5 +37,7 @@
 
 #define p3_cache_init()				do { } while (0)
 
+#define HAVE_ARCH_UNMAPPED_AREA
+
 #endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
 

include/asm-sh/cpu-sh3/dac.h

+#ifndef __ASM_SH_DAC_H
+#define __ASM_SH_DAC_H
+
+/*
+ * Copyright (C) 2003  Andriy Skulysh
+ */
+
+
+#define DADR0	0xa40000a0
+#define DADR1	0xa40000a2
+#define DACR	0xa40000a4
+#define DACR_DAOE1	0x80
+#define DACR_DAOE0	0x40
+#define DACR_DAE	0x20
+
+
+static __inline__ void sh_dac_enable(int channel)
+{
+	unsigned char v;
+	v = ctrl_inb(DACR);
+	if(channel) v |= DACR_DAOE1;
+	else v |= DACR_DAOE0;
+	ctrl_outb(v,DACR);
+}
+
+static __inline__ void sh_dac_disable(int channel)
+{
+	unsigned char v;
+	v = ctrl_inb(DACR);
+	if(channel) v &= ~DACR_DAOE1;
+	else v &= ~DACR_DAOE0;
+	ctrl_outb(v,DACR);
+}
+
+static __inline__ void sh_dac_output(u8 value, int channel)
+{
+	if(channel) ctrl_outb(value,DADR1);
+	else ctrl_outb(value,DADR0);
+}
+
+#endif /* __ASM_SH_DAC_H */
+

include/asm-sh/dreamcast/io.h

-/*
- *	$Id: io.h,v 1.3 2003/05/04 19:30:14 lethal Exp $
- *	IO functions for SEGA Dreamcast
- */
-
-#ifndef _ASM_SH_IO_DREAMCAST_H
-#define _ASM_SH_IO_DREAMCAST_H
-
-#include <asm/io_generic.h>
-
-unsigned long dreamcast_isa_port2addr(unsigned long offset);
-
-#ifdef __WANT_IO_DEF
-
-# define __inb			generic_inb
-# define __inw			generic_inw
-# define __inl			generic_inl
-# define __outb			generic_outb
-# define __outw			generic_outw
-# define __outl			generic_outl
-
-# define __inb_p		generic_inb_p
-# define __inw_p		generic_inw
-# define __inl_p		generic_inl
-# define __outb_p		generic_outb_p
-# define __outw_p		generic_outw
-# define __outl_p		generic_outl
-
-# define __insb			generic_insb
-# define __insw			generic_insw
-# define __insl			generic_insl
-# define __outsb		generic_outsb
-# define __outsw		generic_outsw
-# define __outsl		generic_outsl
-
-# define __readb		generic_readb
-# define __readw		generic_readw
-# define __readl		generic_readl
-# define __writeb		generic_writeb
-# define __writew		generic_writew
-# define __writel		generic_writel
-
-# define __isa_port2addr	dreamcast_isa_port2addr
-# define __ioremap		generic_ioremap
-# define __iounmap		generic_iounmap
-
-#endif
-
-#endif /* _ASM_SH_IO_DREAMCAST_H */

include/asm-sh/hd64461/hd64461.h

 #ifndef __ASM_SH_HD64461
 #define __ASM_SH_HD64461
 /*
- *	$Id: hd64461.h,v 1.4 2004/02/01 19:46:04 lethal Exp $
+ *	$Id: hd64461.h,v 1.5 2004/03/16 00:07:51 lethal Exp $
  *	Copyright (C) 2000 YAEGASHI Takeshi
  *	Hitachi HD64461 companion chip support
  */
 #include <linux/config.h>
 
+/* Constants for PCMCIA mappings */
+#define HD64461_PCC_WINDOW	0x01000000
+
+#define HD64461_PCC0_BASE	0xb8000000	/* area 6 */
+#define HD64461_PCC0_ATTR	(HD64461_PCC0_BASE)
+#define HD64461_PCC0_COMM	(HD64461_PCC0_BASE+HD64461_PCC_WINDOW)
+#define HD64461_PCC0_IO		(HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW)
+
+#define HD64461_PCC1_BASE	0xb4000000	/* area 5 */
+#define HD64461_PCC1_ATTR	(HD64461_PCC1_BASE)
+#define HD64461_PCC1_COMM	(HD64461_PCC1_BASE+HD64461_PCC_WINDOW)
+
 #define HD64461_STBCR	0x10000
 #define HD64461_STBCR_CKIO_STBY			0x2000
 #define HD64461_STBCR_SAFECKE_IST		0x1000
@@ -21,7 +33,7 @@
 #define HD64461_STBCR_STM0ST			0x0008
 #define HD64461_STBCR_STM1ST			0x0004
 #define HD64461_STBCR_SIRST				0x0002
-#define HD64461_STBCR_SURTSD			0x0001
+#define HD64461_STBCR_SURTST			0x0001
 
 #define HD64461_SYSCR	0x10002
 #define HD64461_SCPUCR	0x10004
@@ -77,16 +89,74 @@
 #define HD64461_BBTROPR		0x11068
 #define HD64461_BBTMDR		0x1106a
 
-#define HD64461_PCC0ISR         0x12000
-#define HD64461_PCC0GCR         0x12002
-#define HD64461_PCC0CSCR        0x12004
-#define HD64461_PCC0CSCIER      0x12006
-#define HD64461_PCC0SCR         0x12008
-#define HD64461_PCC1ISR         0x12010
-#define HD64461_PCC1GCR         0x12012
-#define HD64461_PCC1CSCR        0x12014
-#define HD64461_PCC1CSCIER      0x12016
-#define HD64461_PCC1SCR         0x12018
+/* PC Card Controller Registers */
+#define HD64461_PCC0ISR         0x12000 /* socket 0 interface status */
+#define HD64461_PCC0GCR         0x12002 /* socket 0 general control */
+#define HD64461_PCC0CSCR        0x12004 /* socket 0 card status change */
+#define HD64461_PCC0CSCIER      0x12006 /* socket 0 card status change interrupt enable */
+#define HD64461_PCC0SCR         0x12008 /* socket 0 software control */
+#define HD64461_PCC1ISR         0x12010 /* socket 1 interface status */
+#define HD64461_PCC1GCR         0x12012 /* socket 1 general control */
+#define HD64461_PCC1CSCR        0x12014 /* socket 1 card status change */
+#define HD64461_PCC1CSCIER      0x12016 /* socket 1 card status change interrupt enable */
+#define HD64461_PCC1SCR         0x12018 /* socket 1 software control */
+
+/* PCC Interface Status Register */
+#define HD64461_PCCISR_READY		0x80	/* card ready */
+#define HD64461_PCCISR_MWP		0x40	/* card write-protected */
+#define HD64461_PCCISR_VS2		0x20	/* voltage select pin 2 */
+#define HD64461_PCCISR_VS1		0x10	/* voltage select pin 1 */
+#define HD64461_PCCISR_CD2		0x08	/* card detect 2 */
+#define HD64461_PCCISR_CD1		0x04	/* card detect 1 */
+#define HD64461_PCCISR_BVD2		0x02	/* battery 1 */
+#define HD64461_PCCISR_BVD1		0x01	/* battery 1 */
+
+#define HD64461_PCCISR_PCD_MASK		0x0c    /* card detect */
+#define HD64461_PCCISR_BVD_MASK	0x03    /* battery voltage */
+#define HD64461_PCCISR_BVD_BATGOOD	0x03    /* battery good */
+#define HD64461_PCCISR_BVD_BATWARN	0x01    /* battery low warning */
+#define HD64461_PCCISR_BVD_BATDEAD1	0x02    /* battery dead */
+#define HD64461_PCCISR_BVD_BATDEAD2	0x00    /* battery dead */
+
+/* PCC General Control Register */
+#define HD64461_PCCGCR_DRVE		0x80    /* output drive */
+#define HD64461_PCCGCR_PCCR		0x40    /* PC card reset */
+#define HD64461_PCCGCR_PCCT		0x20    /* PC card type, 1=IO&mem, 0=mem */
+#define HD64461_PCCGCR_VCC0		0x10    /* voltage control pin VCC0SEL0 */
+#define HD64461_PCCGCR_PMMOD		0x08    /* memory mode */
+#define HD64461_PCCGCR_PA25		0x04    /* pin A25 */
+#define HD64461_PCCGCR_PA24		0x02    /* pin A24 */
+#define HD64461_PCCGCR_REG		0x01    /* pin PCC0REG# */
+
+/* PCC Card Status Change Register */
+#define HD64461_PCCCSCR_SCDI		0x80    /* sw card detect intr */
+#define HD64461_PCCCSCR_SRV1		0x40    /* reserved */
+#define HD64461_PCCCSCR_IREQ		0x20    /* IREQ intr req */
+#define HD64461_PCCCSCR_SC		0x10    /* STSCHG (status change) pin */
+#define HD64461_PCCCSCR_CDC		0x08    /* CD (card detect) change */
+#define HD64461_PCCCSCR_RC		0x04    /* READY change */
+#define HD64461_PCCCSCR_BW		0x02    /* battery warning change */
+#define HD64461_PCCCSCR_BD		0x01    /* battery dead change */
+
+/* PCC Card Status Change Interrupt Enable Register */
+#define HD64461_PCCCSCIER_CRE		0x80    /* change reset enable */
+#define HD64461_PCCCSCIER_IREQE_MASK   	0x60   /* IREQ enable */
+#define HD64461_PCCCSCIER_IREQE_DISABLED	0x00   /* IREQ disabled */
+#define HD64461_PCCCSCIER_IREQE_LEVEL  	0x20   /* IREQ level-triggered */
+#define HD64461_PCCCSCIER_IREQE_FALLING	0x40   /* IREQ falling-edge-trig */
+#define HD64461_PCCCSCIER_IREQE_RISING 	0x60   /* IREQ rising-edge-trig */
+
+#define HD64461_PCCCSCIER_SCE		0x10    /* status change enable */
+#define HD64461_PCCCSCIER_CDE		0x08    /* card detect change enable */
+#define HD64461_PCCCSCIER_RE		0x04    /* ready change enable */
+#define HD64461_PCCCSCIER_BWE		0x02    /* battery warn change enable */
+#define HD64461_PCCCSCIER_BDE		0x01    /* battery dead change enable*/
+
+/* PCC Software Control Register */
+#define HD64461_PCCSCR_VCC1		0x02	/* voltage control pin 1 */
+#define HD64461_PCCSCR_SWP		0x01    /* write protect */
+
+
 #define HD64461_P0OCR           0x1202a
 #define HD64461_P1OCR           0x1202c
 #define HD64461_PGCR            0x1202e
@@ -121,4 +191,13 @@
 #define HD64461_IRQBASE		OFFCHIP_IRQ_BASE
 #define HD64461_IRQ_NUM 	16
 
+#define HD64461_IRQ_UART    	(HD64461_IRQBASE+5)
+#define HD64461_IRQ_IRDA    	(HD64461_IRQBASE+6)
+#define HD64461_IRQ_TMU1   	(HD64461_IRQBASE+9)
+#define HD64461_IRQ_TMU0  	(HD64461_IRQBASE+10)
+#define HD64461_IRQ_GPIO    	(HD64461_IRQBASE+11)
+#define HD64461_IRQ_AFE     	(HD64461_IRQBASE+12)
+#define HD64461_IRQ_PCC1 	(HD64461_IRQBASE+13)
+#define HD64461_IRQ_PCC0 	(HD64461_IRQBASE+14)
+
 #endif

include/asm-sh/hd64461/io.h

@@ -23,15 +23,21 @@ extern void hd64461_outl(unsigned int value, unsigned long port);
 extern unsigned char hd64461_inb_p(unsigned long port);
 extern void hd64461_outb_p(unsigned char value, unsigned long port);
 
-extern void hd64461_insb(unsigned long port, const void *buffer, unsigned long count);
-extern void hd64461_insw(unsigned long port, const void *buffer, unsigned long count);
-extern void hd64461_insl(unsigned long port, const void *buffer, unsigned long count);
+extern void hd64461_insb(unsigned long port, void *addr, unsigned long count);
+extern void hd64461_insw(unsigned long port, void *addr, unsigned long count);
+extern void hd64461_insl(unsigned long port, void *addr, unsigned long count);
 
 extern void hd64461_outsb(unsigned long port, const void *buffer, unsigned long count);
 extern void hd64461_outsw(unsigned long port, const void *buffer, unsigned long count);
 extern void hd64461_outsl(unsigned long port, const void *buffer, unsigned long count);
 
+extern unsigned short hd64461_readw(unsigned long addr);
+extern void hd64461_writew(unsigned short b, unsigned long addr);
+
 
 extern int hd64461_irq_demux(int irq);
+extern void hd64461_register_irq_demux(int irq,
+		int (*demux)(int irq, void *dev), void *dev);
+extern void hd64461_unregister_irq_demux(int irq);
 
 #endif /* _ASM_SH_IO_HD64461_H */

include/asm-sh/hp6xx/hp6xx.h

+#ifndef __ASM_SH_HP6XX_H
+#define __ASM_SH_HP6XX_H
+
+/*
+ * Copyright (C) 2003  Andriy Skulysh
+ */
+
+
+#define DAC_LCD_BRIGHTNESS		0
+#define DAC_SPEAKER_VOLUME		1
+
+#define HD64461_GPADR_SPEAKER	0x01
+#define HD64461_GPADR_PCMCIA0	(0x02|0x08)
+#define HD64461_GPBDR_LCDOFF	0x01
+#define HD64461_GPBDR_LED_RED	0x80
+
+
+#endif /* __ASM_SH_HP6XX_H */
+

include/asm-sh/irq.h

@@ -30,6 +30,11 @@
 #define TIMER_IPR_POS	 3
 #define TIMER_PRIORITY	 2
 
+#define TIMER1_IRQ	17
+#define TIMER1_IPR_ADDR	INTC_IPRA
+#define TIMER1_IPR_POS	 2
+#define TIMER1_PRIORITY	 4
+
 #define RTC_IRQ		22
 #define RTC_IPR_ADDR	INTC_IPRA
 #define RTC_IPR_POS	 0
@@ -154,7 +159,7 @@
 # define OFFCHIP_NR_IRQS 16
 #else
 # if defined(CONFIG_HD64461)
-#  define OFFCHIP_NR_IRQS 16
+#  define OFFCHIP_NR_IRQS 18
 # elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */
 #  define OFFCHIP_NR_IRQS 48
 # elif defined(CONFIG_HD64465)

include/asm-sh/pgtable.h

@@ -204,6 +204,8 @@ static inline pgprot_t pgprot_noncached(pgprot_t _prot)
 	return __pgprot(prot);
 }
 
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.

include/asm-sh/processor.h

@@ -22,6 +22,7 @@
 
 /* Core Processor Version Register */
 #define CCN_PVR		0xff000030
+#define CCN_CVR		0xff000040
 #define CCN_PRR		0xff000044
 
 /*

include/asm-sh/sh2000/io.h

-/*
- * include/asm-sh/io_sh2000.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *           2001 SUGIOKA Toshinobu (sugioka@itonet.co.jp)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for use when we don't know what machine we are on
- */
-
-#ifndef _ASM_SH_IO_SH2000_H
-#define _ASM_SH_IO_SH2000_H
-
-#include <asm/io_generic.h>
-
-unsigned long sh2000_isa_port2addr(unsigned long offset);
-
-#ifdef __WANT_IO_DEF
-
-# define __inb			generic_inb
-# define __inw			generic_inw
-# define __inl			generic_inl
-# define __outb			generic_outb
-# define __outw			generic_outw
-# define __outl			generic_outl
-
-# define __inb_p		generic_inb_p
-# define __inw_p		generic_inw
-# define __inl_p		generic_inl
-# define __outb_p		generic_outb_p
-# define __outw_p		generic_outw
-# define __outl_p		generic_outl
-
-# define __insb			generic_insb
-# define __insw			generic_insw
-# define __insl			generic_insl
-# define __outsb		generic_outsb
-# define __outsw		generic_outsw
-# define __outsl		generic_outsl
-
-# define __readb		generic_readb
-# define __readw		generic_readw
-# define __readl		generic_readl
-# define __writeb		generic_writeb
-# define __writew		generic_writew
-# define __writel		generic_writel
-
-# define __isa_port2addr	sh2000_isa_port2addr
-# define __ioremap		generic_ioremap
-# define __iounmap		generic_iounmap
-
-#endif
-
-#endif /* _ASM_SH_IO_SH2000_H */

include/asm-sh/signal.h

@@ -7,6 +7,10 @@
 struct pt_regs;
 struct siginfo;
 
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
 #define _NSIG		64
 #define _NSIG_BPW	32
 #define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
@@ -17,6 +21,14 @@ typedef struct {
 	unsigned long sig[_NSIG_WORDS];
 } sigset_t;
 
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
 #define SIGHUP		 1
 #define SIGINT		 2
 #define SIGQUIT		 3

include/linux/miscdevice.h

@@ -19,6 +19,7 @@
 #define SUN_OPENPROM_MINOR 139
 #define DMAPI_MINOR		140	/* DMAPI */
 #define NVRAM_MINOR 144
+#define STORE_QUEUE_MINOR	155
 #define I2O_MINOR 166
 #define MICROCODE_MINOR		184
 #define MWAVE_MINOR	219		/* ACP/Mwave Modem */