[ARM PATCH] 1810/1: Support for non-PXA XScale UARTs

Patch from Deepak Saxena

Supersedes 1809/1

drivers/serial/8250.c

@@ -170,7 +170,8 @@ static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = {
 	{ "ST16654",	64,	UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
 	{ "XR16850",	128,	UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
 	{ "RSA",	2048,	UART_CLEAR_FIFO | UART_USE_FIFO },
-	{ "NS16550A",	16,	UART_CLEAR_FIFO | UART_USE_FIFO | UART_NATSEMI }
+	{ "NS16550A",	16,	UART_CLEAR_FIFO | UART_USE_FIFO | UART_NATSEMI },
+	{ "XScale",	32,	UART_CLEAR_FIFO | UART_USE_FIFO  },
 };
 
 static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
@@ -1512,6 +1513,8 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
 	up->ier &= ~UART_IER_MSI;
 	if (UART_ENABLE_MS(&up->port, termios->c_cflag))
 		up->ier |= UART_IER_MSI;
+	if (up->port.type == PORT_XSCALE)
+		up->ier |= UART_IER_UUE | UART_IER_RTOIE;
 
 	serial_out(up, UART_IER, up->ier);
 
@@ -1953,6 +1956,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	 *	First save the UER then disable the interrupts
 	 */
 	ier = serial_in(up, UART_IER);
+
+	if (up->port.type == PORT_XSCALE)
+		serial_out(up, UART_IER, UART_IER_UUE);
+	else
 		serial_out(up, UART_IER, 0);
 
 	/*

include/linux/serial_core.h

@@ -36,7 +36,8 @@
 #define PORT_16850	12
 #define PORT_RSA	13
 #define PORT_NS16550A	14
-#define PORT_MAX_8250	14	/* max port ID */
+#define PORT_XSCALE	15
+#define PORT_MAX_8250	15	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed

include/linux/serial_reg.h

@@ -142,7 +142,7 @@
 #define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
 
 /*
- * The Intel PXA2xx chip defines those bits
+ * The Intel XScale on-chip UARTs define these bits
  */
 #define UART_IER_DMAE	0x80	/* DMA Requests Enable */
 #define UART_IER_UUE	0x40	/* UART Unit Enable */