[PATCH] DVB linkage fix

We have two global variables called "debug".

The attached patch cleans up various aspects of dibusb module argument
handling, so it's a bit larger than just renaming "debug".
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/media/dvb/dibusb/dvb-dibusb-core.c

@@ -27,17 +27,22 @@
 #include <linux/moduleparam.h>
 
 /* debug */
+int dvb_dibusb_debug;
+module_param_named(debug, dvb_dibusb_debug,  int, 0644);
+
 #ifdef CONFIG_DVB_DIBCOM_DEBUG
-int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=alotmore,8=ts,16=err,32=rc (|-able)).");
+#define DBSTATUS ""
+#else
+#define DBSTATUS " (debugging is not enabled)"
 #endif
+MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=alotmore,8=ts,16=err,32=rc (|-able))." DBSTATUS);
+#undef DBSTATUS
 
-int pid_parse;
+static int pid_parse;
 module_param(pid_parse, int, 0644);
 MODULE_PARM_DESC(pid_parse, "enable pid parsing (filtering) when running at USB2.0");
 
-int rc_query_interval;
+static int rc_query_interval;
 module_param(rc_query_interval, int, 0644);
 MODULE_PARM_DESC(rc_query_interval, "interval in msecs for remote control query (default: 100; min: 40)");
 
@@ -410,6 +415,10 @@ static int dibusb_probe(struct usb_interface *intf,
 		dib->udev = udev;
 		dib->dibdev = dibdev;
 
+		/* store parameters to structures */
+		dib->rc_query_interval = rc_query_interval;
+		dib->pid_parse = pid_parse;
+
 		usb_set_intfdata(intf, dib);
 		
 		ret = dibusb_init(dib);

drivers/media/dvb/dibusb/dvb-dibusb-remote.c

@@ -143,7 +143,7 @@ static void dibusb_remote_query(void *data)
 	   if we're busy. */
 	dibusb_read_remote_control(dib);
 	schedule_delayed_work(&dib->rc_query_work,
-			      msecs_to_jiffies(rc_query_interval));
+			      msecs_to_jiffies(dib->rc_query_interval));
 }
 
 int dibusb_remote_init(struct usb_dibusb *dib)
@@ -171,11 +171,11 @@ int dibusb_remote_init(struct usb_dibusb *dib)
 	INIT_WORK(&dib->rc_query_work, dibusb_remote_query, dib);
 
 	/* Start the remote-control polling. */
-	if (rc_query_interval < 40)
-		rc_query_interval = 100; /* default */
+	if (dib->rc_query_interval < 40)
+		dib->rc_query_interval = 100; /* default */
 
-	info("schedule remote query interval to %d msecs.",rc_query_interval);
-	schedule_delayed_work(&dib->rc_query_work,msecs_to_jiffies(rc_query_interval));
+	info("schedule remote query interval to %d msecs.",dib->rc_query_interval);
+	schedule_delayed_work(&dib->rc_query_work,msecs_to_jiffies(dib->rc_query_interval));
 
 	dib->init_state |= DIBUSB_STATE_REMOTE;
 	

drivers/media/dvb/dibusb/dvb-dibusb-usb.c

@@ -158,7 +158,7 @@ int dibusb_streaming(struct usb_dibusb *dib,int onoff)
 
 int dibusb_urb_init(struct usb_dibusb *dib)
 {
-	int ret,i,bufsize;
+	int ret,i,bufsize,def_pid_parse = 1;
 	
 	/*
 	 * when reloading the driver w/o replugging the device 
@@ -210,12 +210,14 @@ int dibusb_urb_init(struct usb_dibusb *dib)
 		dib->init_state |= DIBUSB_STATE_URB_SUBMIT;
 	}
 
-
-	dib->pid_parse = 1;
+	/* dib->pid_parse here contains the value of the module parameter */
+	/* decide if pid parsing can be deactivated:
+	 * is possible (by speed) and wanted (by user)
+	 */
 	switch (dib->dibdev->dev_cl->id) {
 		case DIBUSB2_0:
-			if (dib->udev->speed == USB_SPEED_HIGH && !pid_parse) {
-				dib->pid_parse = 0;
+			if (dib->udev->speed == USB_SPEED_HIGH && !dib->pid_parse) {
+				def_pid_parse = 0;
 				info("running at HIGH speed, will deliver the complete TS.");
 			} else
 				info("will use pid_parsing.");
@@ -223,6 +225,8 @@ int dibusb_urb_init(struct usb_dibusb *dib)
 		default: 
 			break;
 	}
+	/* from here on it contains the device and user decision */
+	dib->pid_parse = def_pid_parse;
 	
 	return 0;
 }

drivers/media/dvb/dibusb/dvb-dibusb.h

@@ -27,31 +27,26 @@
 /* debug */
 #ifdef CONFIG_DVB_DIBCOM_DEBUG
 #define dprintk(level,args...) \
-	    do { if ((debug & level)) { printk(args); } } while (0)
+	    do { if ((dvb_dibusb_debug & level)) { printk(args); } } while (0)
 
-#define debug_dump(b,l) if (debug) {\
-	int i; deb_xfer("%s: %d > ",__FUNCTION__,l); \
+#define debug_dump(b,l) {\
+	int i; \
 	for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \
 	deb_xfer("\n");\
 }
 
-/* module parameters - declared in -core.c */
-extern int debug;
-
 #else
 #define dprintk(args...)
 #define debug_dump(b,l)
 #endif
 
+extern int dvb_dibusb_debug;
+
 /* Version information */
 #define DRIVER_VERSION "0.3"
 #define DRIVER_DESC "Driver for DiBcom based USB Budget DVB-T device"
 #define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
 
-/* module parameters - declared in -core.c */
-extern int pid_parse;
-extern int rc_query_interval;
-
 #define deb_info(args...) dprintk(0x01,args)
 #define deb_xfer(args...) dprintk(0x02,args)
 #define deb_alot(args...) dprintk(0x04,args)
@@ -162,7 +157,6 @@ struct usb_dibusb {
 	int init_state;
 
 	int feedcount;
-	int pid_parse;
 	struct dib_fe_xfer_ops xfer_ops;
 
 	struct dibusb_tuner *tuner;
@@ -196,6 +190,10 @@ struct usb_dibusb {
 	struct input_dev rc_input_dev;
 	struct work_struct rc_query_work;
 	int rc_input_event;
+
+	/* module parameters */
+	int pid_parse;
+	int rc_query_interval;
 };
 
 /* commonly used functions in the separated files */