Commit e9d3adbe authored by Alwin Beukers's avatar Alwin Beukers Committed by Greg Kroah-Hartman

staging: brcm80211: removed accessor functions for band type and etheraddress.

Functions were trivial so not really adding value.
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: default avatarRoland Vossen <rvossen@broadcom.com>
Reviewed-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 406f8d65
......@@ -1369,16 +1369,6 @@ static void brcms_b_wait_for_wake(struct brcms_hardware *wlc_hw)
DBGST_ASLEEP), wlc_hw->wlc->fastpwrup_dly);
}
static void brcms_b_hw_etheraddr(struct brcms_hardware *wlc_hw, u8 *ea)
{
memcpy(ea, wlc_hw->etheraddr, ETH_ALEN);
}
static int brcms_b_bandtype(struct brcms_hardware *wlc_hw)
{
return wlc_hw->band->bandtype;
}
/* control chip clock to save power, enable dynamic clock or force fast clock */
static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode)
{
......@@ -3939,7 +3929,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot)
{
wlc_hw->shortslot = shortslot;
if (brcms_b_bandtype(wlc_hw) == BRCM_BAND_2G && wlc_hw->up) {
if (wlc_hw->band->bandtype == BRCM_BAND_2G && wlc_hw->up) {
brcms_c_suspend_mac_and_wait(wlc_hw->wlc);
brcms_b_update_slot_timing(wlc_hw, shortslot);
brcms_c_enable_mac(wlc_hw->wlc);
......@@ -4854,7 +4844,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device,
/* Get a phy for this band */
wlc_hw->band->pi =
wlc_phy_attach(wlc_hw->phy_sh, regs,
brcms_b_bandtype(wlc_hw), vars,
wlc_hw->band->bandtype, vars,
wlc->wiphy);
if (wlc_hw->band->pi == NULL) {
wiphy_err(wiphy, "wl%d: brcms_b_attach: wlc_phy_"
......@@ -5235,9 +5225,8 @@ brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
for (i = 0; i < NFIFO; i++)
wlc->core->txavail[i] = wlc->hw->txavail[i];
brcms_b_hw_etheraddr(wlc->hw, wlc->perm_etheraddr);
memcpy(&pub->cur_etheraddr, &wlc->perm_etheraddr, ETH_ALEN);
memcpy(&wlc->perm_etheraddr, &wlc->hw->etheraddr, ETH_ALEN);
memcpy(&pub->cur_etheraddr, &wlc->hw->etheraddr, ETH_ALEN);
for (j = 0; j < wlc->pub->_nbands; j++) {
wlc->band = wlc->bandstate[j];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment