Commit eaa535e7 authored by Steven Cole's avatar Steven Cole Committed by David Woodhouse

[PATCH] Spelling fixes for paticular -> particular and others.

This patch provides the following spelling fixes:

paticular   -> particular
usefull     -> useful
occurance   -> occurrence
occurances  -> occurrences
successfull -> successful
parent b8fc02cb
...@@ -152,7 +152,7 @@ ...@@ -152,7 +152,7 @@
<para> <para>
While the basic functions are defined to be synchronous with respect While the basic functions are defined to be synchronous with respect
to each other and ordered with respect to each other the busses the to each other and ordered with respect to each other the busses the
devices sit on may themselves have asynchronocity. In paticular many devices sit on may themselves have asynchronicity. In particular many
authors are burned by the fact that PCI bus writes are posted authors are burned by the fact that PCI bus writes are posted
asynchronously. A driver author must issue a read from the same asynchronously. A driver author must issue a read from the same
device to ensure that writes have occurred in the specific cases the device to ensure that writes have occurred in the specific cases the
......
...@@ -187,7 +187,7 @@ which you set the parameter (A or B). ...@@ -187,7 +187,7 @@ which you set the parameter (A or B).
this port is not "Sense". If autonegotiation is "On", all this port is not "Sense". If autonegotiation is "On", all
three values are possible. If it is "Off", only "Full" and three values are possible. If it is "Off", only "Full" and
"Half" are allowed. "Half" are allowed.
It is usefull if your link partner does not support all It is useful if your link partner does not support all
possible combinations. possible combinations.
- Flow Control - Flow Control
......
...@@ -14,7 +14,7 @@ in order to analyze the reason for the crash. ...@@ -14,7 +14,7 @@ in order to analyze the reason for the crash.
If the system still runs but only a subcomponent which uses dbf failes, If the system still runs but only a subcomponent which uses dbf failes,
it is possible to look at the debug logs on a live system via the Linux proc it is possible to look at the debug logs on a live system via the Linux proc
filesystem. filesystem.
The debug feature may also very usefull for kernel and driver development. The debug feature may also very useful for kernel and driver development.
Design: Design:
------- -------
......
...@@ -440,7 +440,7 @@ static __init int broken_pirq(struct dmi_blacklist *d) ...@@ -440,7 +440,7 @@ static __init int broken_pirq(struct dmi_blacklist *d)
{ {
printk(KERN_INFO " *** Possibly defective BIOS detected (irqtable)\n"); printk(KERN_INFO " *** Possibly defective BIOS detected (irqtable)\n");
printk(KERN_INFO " *** Many BIOSes matching this signature have incorrect IRQ routing tables.\n"); printk(KERN_INFO " *** Many BIOSes matching this signature have incorrect IRQ routing tables.\n");
printk(KERN_INFO " *** If you see IRQ problems, in paticular SCSI resets and hangs at boot\n"); printk(KERN_INFO " *** If you see IRQ problems, in particular SCSI resets and hangs at boot\n");
printk(KERN_INFO " *** contact your hardware vendor and ask about updates.\n"); printk(KERN_INFO " *** contact your hardware vendor and ask about updates.\n");
printk(KERN_INFO " *** Building an SMP kernel may evade the bug some of the time.\n"); printk(KERN_INFO " *** Building an SMP kernel may evade the bug some of the time.\n");
#ifdef CONFIG_X86_IO_APIC #ifdef CONFIG_X86_IO_APIC
......
...@@ -52,7 +52,7 @@ static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ...@@ -52,7 +52,7 @@ static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
pin--; pin--;
/* Nothing usefull at PIIX4 pin 1 */ /* Nothing useful at PIIX4 pin 1 */
if (bus == pci_bus0 && slot == 4 && pin == 0) if (bus == pci_bus0 && slot == 4 && pin == 0)
return -1; return -1;
......
...@@ -214,7 +214,7 @@ void sys_free_irq(unsigned int irq, void *dev_id) ...@@ -214,7 +214,7 @@ void sys_free_irq(unsigned int irq, void *dev_id)
/* /*
* Do we need these probe functions on the m68k? * Do we need these probe functions on the m68k?
* *
* ... may be usefull with ISA devices * ... may be useful with ISA devices
*/ */
unsigned long probe_irq_on (void) unsigned long probe_irq_on (void)
{ {
......
...@@ -494,7 +494,7 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev) ...@@ -494,7 +494,7 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
* @regs: Register data (surplus to our requirements) * @regs: Register data (surplus to our requirements)
* *
* Handle the ether interface interrupts. The 3c501 needs a lot more * Handle the ether interface interrupts. The 3c501 needs a lot more
* hand holding than most cards. In paticular we get a transmit interrupt * hand holding than most cards. In particular we get a transmit interrupt
* with a collision error because the board firmware isnt capable of rewinding * with a collision error because the board firmware isnt capable of rewinding
* its own transmit buffer pointers. It can however count to 16 for us. * its own transmit buffer pointers. It can however count to 16 for us.
* *
...@@ -684,7 +684,7 @@ static void el_interrupt(int irq, void *dev_id, struct pt_regs *regs) ...@@ -684,7 +684,7 @@ static void el_interrupt(int irq, void *dev_id, struct pt_regs *regs)
* @dev: Device to pull the packets from * @dev: Device to pull the packets from
* *
* We have a good packet. Well, not really "good", just mostly not broken. * We have a good packet. Well, not really "good", just mostly not broken.
* We must check everything to see if it is good. In paticular we occasionally * We must check everything to see if it is good. In particular we occasionally
* get wild packet sizes from the card. If the packet seems sane we PIO it * get wild packet sizes from the card. If the packet seems sane we PIO it
* off the card and queue it for the protocol layers. * off the card and queue it for the protocol layers.
*/ */
......
...@@ -227,7 +227,7 @@ static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); ...@@ -227,7 +227,7 @@ static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
* Because MCA bus is a real bus and we can scan for cards we could do a * Because MCA bus is a real bus and we can scan for cards we could do a
* single scan for all boards here. Right now we use the passed in device * single scan for all boards here. Right now we use the passed in device
* structure and scan for only one board. This needs fixing for modules * structure and scan for only one board. This needs fixing for modules
* in paticular. * in particular.
*/ */
int __init mc32_probe(struct net_device *dev) int __init mc32_probe(struct net_device *dev)
......
...@@ -236,7 +236,7 @@ ...@@ -236,7 +236,7 @@
* -Fixed bug for RX counters. On an RX overflow interrupt the high * -Fixed bug for RX counters. On an RX overflow interrupt the high
* words of all RX counters were incremented. * words of all RX counters were incremented.
* -SET operations on FLOWCTRL_MODE and LINK_MODE accept now the * -SET operations on FLOWCTRL_MODE and LINK_MODE accept now the
* value 0, which has no effect. It is usefull for multiple instance * value 0, which has no effect. It is useful for multiple instance
* SETs. * SETs.
* *
* Revision 1.37 1998/11/20 08:02:04 mhaveman * Revision 1.37 1998/11/20 08:02:04 mhaveman
...@@ -1672,7 +1672,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ ...@@ -1672,7 +1672,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
* Description: * Description:
* Calls a general sub-function for all this stuff. The preset does * Calls a general sub-function for all this stuff. The preset does
* the same as a set, but returns just before finally setting the * the same as a set, but returns just before finally setting the
* new value. This is usefull to check if a set might be successfull. * new value. This is useful to check if a set might be successful.
* If as instance a -1 is passed, an array of values is supposed and * If as instance a -1 is passed, an array of values is supposed and
* all instance of the OID will be set. * all instance of the OID will be set.
* *
...@@ -1716,7 +1716,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ ...@@ -1716,7 +1716,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
* Description: * Description:
* Calls a general sub-function for all this stuff. The preset does * Calls a general sub-function for all this stuff. The preset does
* the same as a set, but returns just before finally setting the * the same as a set, but returns just before finally setting the
* new value. This is usefull to check if a set might be successfull. * new value. This is useful to check if a set might be successful.
* If as instance a -1 is passed, an array of values is supposed and * If as instance a -1 is passed, an array of values is supposed and
* all instance of the OID will be set. * all instance of the OID will be set.
* *
...@@ -1935,7 +1935,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ ...@@ -1935,7 +1935,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */
* Description: * Description:
* Calls a general sub-function for all this set stuff. The preset does * Calls a general sub-function for all this set stuff. The preset does
* the same as a set, but returns just before finally setting the * the same as a set, but returns just before finally setting the
* new value. This is usefull to check if a set might be successfull. * new value. This is useful to check if a set might be successful.
* The sub-function runs through the IdTable, checks which OIDs are able * The sub-function runs through the IdTable, checks which OIDs are able
* to set, and calls the handler function of the OID to perform the * to set, and calls the handler function of the OID to perform the
* preset. The return value of the function will also be stored in * preset. The return value of the function will also be stored in
...@@ -6813,7 +6813,7 @@ unsigned int PhysPortIndex) /* Physical port index */ ...@@ -6813,7 +6813,7 @@ unsigned int PhysPortIndex) /* Physical port index */
* *
* Description: * Description:
* The COMMON module only tells us if the mode is half or full duplex. * The COMMON module only tells us if the mode is half or full duplex.
* But in the decade of auto sensing it is usefull for the user to * But in the decade of auto sensing it is useful for the user to
* know if the mode was negotiated or forced. Therefore we have a * know if the mode was negotiated or forced. Therefore we have a
* look to the mode, which was last used by the negotiation process. * look to the mode, which was last used by the negotiation process.
* *
......
...@@ -562,7 +562,7 @@ ...@@ -562,7 +562,7 @@
*/ */
/* Statistics Registers. All of these registers are 16-bits and /* Statistics Registers. All of these registers are 16-bits and
* track occurances of a specific event. GEM can be configured * track occurrences of a specific event. GEM can be configured
* to interrupt the host cpu when any of these counters overflow. * to interrupt the host cpu when any of these counters overflow.
* They should all be explicitly initialized to zero when the interface * They should all be explicitly initialized to zero when the interface
* is brought up. * is brought up.
......
...@@ -1630,7 +1630,7 @@ u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) ...@@ -1630,7 +1630,7 @@ u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
* host_int The contents of the HOST_INT * host_int The contents of the HOST_INT
* port. * port.
* *
* This driver is structured to determine EOC occurances by * This driver is structured to determine EOC occurrences by
* reading the CSTAT member of the list structure. Tx EOC * reading the CSTAT member of the list structure. Tx EOC
* interrupts are disabled via the DIO INTDIS register. * interrupts are disabled via the DIO INTDIS register.
* However, TLAN chips before revision 3.0 didn't have this * However, TLAN chips before revision 3.0 didn't have this
...@@ -1753,7 +1753,7 @@ u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) ...@@ -1753,7 +1753,7 @@ u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
* host_int The contents of the HOST_INT * host_int The contents of the HOST_INT
* port. * port.
* *
* This driver is structured to determine EOC occurances by * This driver is structured to determine EOC occurrences by
* reading the CSTAT member of the list structure. Rx EOC * reading the CSTAT member of the list structure. Rx EOC
* interrupts are disabled via the DIO INTDIS register. * interrupts are disabled via the DIO INTDIS register.
* However, TLAN chips before revision 3.0 didn't have this * However, TLAN chips before revision 3.0 didn't have this
......
...@@ -1582,7 +1582,7 @@ dasd_sleep_on_immediatly(dasd_ccw_req_t * cqr) ...@@ -1582,7 +1582,7 @@ dasd_sleep_on_immediatly(dasd_ccw_req_t * cqr)
/* /*
* Cancels a request that was started with dasd_sleep_on_req. * Cancels a request that was started with dasd_sleep_on_req.
* This is usefull to timeout requests. The request will be * This is useful to timeout requests. The request will be
* terminated if it is currently in i/o. * terminated if it is currently in i/o.
* Returns 1 if the request has been terminated. * Returns 1 if the request has been terminated.
*/ */
......
...@@ -41,7 +41,7 @@ ...@@ -41,7 +41,7 @@
/* Befs B+tree structure: /* Befs B+tree structure:
* *
* The first thing in the tree is the tree superblock. It tells you * The first thing in the tree is the tree superblock. It tells you
* all kinds of usefull things about the tree, like where the rootnode * all kinds of useful things about the tree, like where the rootnode
* is located, and the size of the nodes (always 1024 with current version * is located, and the size of the nodes (always 1024 with current version
* of BeOS). * of BeOS).
* *
......
...@@ -99,7 +99,7 @@ UniStrcat(wchar_t * ucs1, const wchar_t * ucs2) ...@@ -99,7 +99,7 @@ UniStrcat(wchar_t * ucs1, const wchar_t * ucs2)
* UniStrchr: Find a character in a string * UniStrchr: Find a character in a string
* *
* Returns: * Returns:
* Address of first occurance of character in string * Address of first occurrence of character in string
* or NULL if the character is not in the string * or NULL if the character is not in the string
*/ */
static inline wchar_t * static inline wchar_t *
......
...@@ -97,7 +97,7 @@ ...@@ -97,7 +97,7 @@
/* /*
* Remove the item from the list and perform its initialization. * Remove the item from the list and perform its initialization.
* This is usefull for us because we can test if the item is linked * This is useful for us because we can test if the item is linked
* using "EP_IS_LINKED(p)". * using "EP_IS_LINKED(p)".
*/ */
#define EP_LIST_DEL(p) do { list_del(p); INIT_LIST_HEAD(p); } while (0) #define EP_LIST_DEL(p) do { list_del(p); INIT_LIST_HEAD(p); } while (0)
......
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
* Very simple lz77-ish encoder. * Very simple lz77-ish encoder.
* *
* Theory of operation: Both encoder and decoder have a list of "last * Theory of operation: Both encoder and decoder have a list of "last
* occurances" for every possible source-value; after sending the * occurrences" for every possible source-value; after sending the
* first source-byte, the second byte indicated the "run" length of * first source-byte, the second byte indicated the "run" length of
* matches * matches
* *
......
...@@ -145,7 +145,7 @@ void pm_unregister_all(pm_callback callback) ...@@ -145,7 +145,7 @@ void pm_unregister_all(pm_callback callback)
* and conflicting. * and conflicting.
* *
* WARNING: Calling pm_send directly is not generally recommended, in * WARNING: Calling pm_send directly is not generally recommended, in
* paticular there is no locking against the pm_dev going away. The * particular there is no locking against the pm_dev going away. The
* caller must maintain all needed locking or have 'inside knowledge' * caller must maintain all needed locking or have 'inside knowledge'
* on the safety. Also remember that this function is not locked against * on the safety. Also remember that this function is not locked against
* pm_unregister. This means that you must handle SMP races on callback * pm_unregister. This means that you must handle SMP races on callback
......
...@@ -401,7 +401,7 @@ snd_seq_real_time_t snd_seq_timer_get_cur_time(seq_timer_t *tmr) ...@@ -401,7 +401,7 @@ snd_seq_real_time_t snd_seq_timer_get_cur_time(seq_timer_t *tmr)
return cur_time; return cur_time;
} }
/* TODO: use interpolation on tick queue (will only be usefull for very /* TODO: use interpolation on tick queue (will only be useful for very
high PPQ values) */ high PPQ values) */
snd_seq_tick_time_t snd_seq_timer_get_cur_tick(seq_timer_t *tmr) snd_seq_tick_time_t snd_seq_timer_get_cur_tick(seq_timer_t *tmr)
{ {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment