Merge tag 'renesas-r8a7740-multiplatform-for-v3.18' of...

Merge tag 'renesas-r8a7740-multiplatform-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC r8a7740 Multiplatform Updates for v3.18" from Simon Horman:

* Enable multiplatform support for r8a7740 SoC and remove
  its DT-reference C board DTS files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-r8a7740-multiplatform-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: armadillo800eva reference: Remove DTS
  ARM: shmobile: armadillo800eva reference: Remove C board code
  ARM: shmobile: r8a7740: Add restart callback
  ARM: shmobile: armadillo800eva: Build DTS for multiplatform
  ARM: shmobile: armadillo800eva: Sync DTS
  ARM: shmobile: r8a7740: Multiplatform support

arch/arm/boot/dts/Makefile

@@ -361,7 +361,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
-	r8a7740-armadillo800eva-reference.dtb \
 	r8a7779-marzen.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb \
@@ -372,6 +371,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
 	sh7372-mackerel.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
+	r8a7740-armadillo800eva.dtb \
 	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb \

arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts

-/*
- * Reference Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "armadillo 800 eva reference";
-	compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
-
-	aliases {
-		serial1 = &scifa1;
-	};
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reg_3p3v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_sdhi0: regulator@1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator@2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sdhi0>;
-
-		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
-		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
-		states = <3300000 0
-			  1800000 1>;
-
-		enable-active-high;
-	};
-
-	reg_5p0v: regulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5.0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "SW3";
-			gpio-key,wakeup;
-		};
-
-		back-key {
-			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "SW4";
-		};
-
-		menu-key {
-			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			label = "SW5";
-		};
-
-		home-key {
-			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "SW6";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led3 {
-			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
-			label = "LED3";
-		};
-		led4 {
-			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
-			label = "LED4";
-		};
-		led5 {
-			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
-			label = "LED5";
-		};
-		led6 {
-			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
-			label = "LED6";
-		};
-	};
-
-	i2c2: i2c@2 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
-			 &pfc 91 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
-		default-brightness-level = <9>;
-		pinctrl-0 = <&backlight_pins>;
-		pinctrl-names = "default";
-		power-supply = <&reg_5p0v>;
-		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "i2s";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sh_fsi2 0>;
-			bitclock-inversion;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&wm8978>;
-			bitclock-master;
-			frame-master;
-			system-clock-frequency = <12288000>;
-		};
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy0>;
-	status = "ok";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&extal1_clk {
-	clock-frequency = <25000000>;
-};
-&extal2_clk {
-	clock-frequency = <48000000>;
-};
-&fsibck_clk {
-	clock-frequency = <12288000>;
-};
-&cpg_clocks {
-	renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
-};
-
-&cmt1 {
-	status = "ok";
-};
-
-&i2c0 {
-	status = "okay";
-	touchscreen@55 {
-		compatible = "sitronix,st1232";
-		reg = <0x55>;
-		interrupt-parent = <&irqpin1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&st1232_pins>;
-		pinctrl-names = "default";
-		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
-	};
-
-	wm8978: wm8978@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8978";
-		reg = <0x1a>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	rtc@30 {
-		compatible = "sii,s35390a";
-		reg = <0x30>;
-	};
-};
-
-&pfc {
-	ether_pins: ether {
-		renesas,groups = "gether_mii", "gether_int";
-		renesas,function = "gether";
-	};
-
-	scifa1_pins: serial1 {
-		renesas,groups = "scifa1_data";
-		renesas,function = "scifa1";
-	};
-
-	st1232_pins: touchscreen {
-		renesas,groups = "intc_irq10";
-		renesas,function = "intc";
-	};
-
-	backlight_pins: backlight {
-		renesas,groups = "tpu0_to2_1";
-		renesas,function = "tpu0";
-	};
-
-	mmc0_pins: mmc0 {
-		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
-		renesas,function = "mmc0";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
-		renesas,function = "sdhi0";
-	};
-
-	fsia_pins: sounda {
-		renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
-				 "fsia_data_in_1", "fsia_data_out_0";
-		renesas,function = "fsia";
-	};
-};
-
-&tpu {
-	status = "okay";
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmc0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&scifa1 {
-	pinctrl-0 = <&scifa1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	bus-width = <4>;
-	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sh_fsi2 {
-	pinctrl-0 = <&fsia_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};

arch/arm/boot/dts/r8a7740-armadillo800eva.dts

@@ -10,10 +10,18 @@
 
 /dts-v1/;
 #include "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "armadillo 800 eva";
-	compatible = "renesas,armadillo800eva";
+	compatible = "renesas,armadillo800eva", "renesas,r8a7740";
+
+	aliases {
+		serial1 = &scifa1;
+	};
 
 	chosen {
 		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
@@ -23,4 +31,270 @@ memory {
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
+
+	reg_3p3v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sdhi0>;
+
+		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0
+			  1800000 1>;
+
+		enable-active-high;
+	};
+
+	reg_5p0v: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5.0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "SW3";
+			gpio-key,wakeup;
+		};
+
+		back-key {
+			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "SW4";
+		};
+
+		menu-key {
+			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "SW5";
+		};
+
+		home-key {
+			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "SW6";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led3 {
+			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+		led4 {
+			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+			label = "LED4";
+		};
+		led5 {
+			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+			label = "LED5";
+		};
+		led6 {
+			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+	};
+
+	i2c2: i2c@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
+			 &pfc 91 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+		pinctrl-0 = <&backlight_pins>;
+		pinctrl-names = "default";
+		power-supply = <&reg_5p0v>;
+		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sh_fsi2 0>;
+			bitclock-inversion;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+			bitclock-master;
+			frame-master;
+			system-clock-frequency = <12288000>;
+		};
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy0>;
+	status = "ok";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&extal1_clk {
+	clock-frequency = <25000000>;
+};
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+&fsibck_clk {
+	clock-frequency = <12288000>;
+};
+&cpg_clocks {
+	renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
+};
+
+&cmt1 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "okay";
+	touchscreen@55 {
+		compatible = "sitronix,st1232";
+		reg = <0x55>;
+		interrupt-parent = <&irqpin1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&st1232_pins>;
+		pinctrl-names = "default";
+		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
+	};
+
+	wm8978: wm8978@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&pfc {
+	ether_pins: ether {
+		renesas,groups = "gether_mii", "gether_int";
+		renesas,function = "gether";
+	};
+
+	scifa1_pins: serial1 {
+		renesas,groups = "scifa1_data";
+		renesas,function = "scifa1";
+	};
+
+	st1232_pins: touchscreen {
+		renesas,groups = "intc_irq10";
+		renesas,function = "intc";
+	};
+
+	backlight_pins: backlight {
+		renesas,groups = "tpu0_to2_1";
+		renesas,function = "tpu0";
+	};
+
+	mmc0_pins: mmc0 {
+		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+
+	fsia_pins: sounda {
+		renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
+				 "fsia_data_in_1", "fsia_data_out_0";
+		renesas,function = "fsia";
+	};
+};
+
+&tpu {
+	status = "okay";
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&scifa1 {
+	pinctrl-0 = <&scifa1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sh_fsi2 {
+	pinctrl-0 = <&fsia_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
 };

arch/arm/mach-shmobile/Kconfig

@@ -26,6 +26,11 @@ config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
 	select SYS_SUPPORTS_SH_MTU2
 
+config ARCH_R8A7740
+	bool "R-Mobile A1 (R8A77400)"
+	select ARCH_RMOBILE
+	select RENESAS_INTC_IRQPIN
+
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
 	select RENESAS_INTC_IRQPIN
@@ -183,21 +188,6 @@ config MACH_ARMADILLO800EVA
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 
-config MACH_ARMADILLO800EVA_REFERENCE
-	bool "Armadillo-800 EVA board - Reference Device Tree Implementation"
-	depends on ARCH_R8A7740
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SH_ETH
-	select SND_SOC_WM8978 if SND_SIMPLE_CARD
-	select USE_OF
-	---help---
-	   Use reference implementation of Armadillo800 EVA board support
-	   which makes greater use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 config MACH_BOCKW
 	bool "BOCK-W platform"
 	depends on ARCH_R8A7778

arch/arm/mach-shmobile/Makefile

@@ -72,7 +72,6 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
-obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o

arch/arm/mach-shmobile/Makefile.boot

@@ -3,7 +3,6 @@ loadaddr-y	:=
 loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
 loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
-loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000

arch/arm/mach-shmobile/board-armadillo800eva-reference.c

-/*
- * armadillo 800 eva board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "common.h"
-#include "r8a7740.h"
-
-/*
- * CON1		Camera Module
- * CON2		Extension Bus
- * CON3		HDMI Output
- * CON4		Composite Video Output
- * CON5		H-UDI JTAG
- * CON6		ARM JTAG
- * CON7		SD1
- * CON8		SD2
- * CON9		RTC BackUp
- * CON10	Monaural Mic Input
- * CON11	Stereo Headphone Output
- * CON12	Audio Line Output(L)
- * CON13	Audio Line Output(R)
- * CON14	AWL13 Module
- * CON15	Extension
- * CON16	LCD1
- * CON17	LCD2
- * CON19	Power Input
- * CON20	USB1
- * CON21	USB2
- * CON22	Serial
- * CON23	LAN
- * CON24	USB3
- * LED1		Camera LED (Yellow)
- * LED2		Power LED (Green)
- * LED3-LED6	User LED (Yellow)
- * LED7		LAN link LED (Green)
- * LED8		LAN activity LED (Yellow)
- */
-
-/*
- * DipSwitch
- *
- *                    SW1
- *
- * -12345678-+---------------+----------------------------
- *  1        | boot          | hermit
- *  0        | boot          | OS auto boot
- * -12345678-+---------------+----------------------------
- *   00      | boot device   | eMMC
- *   10      | boot device   | SDHI0 (CON7)
- *   01      | boot device   | -
- *   11      | boot device   | Extension Buss (CS0)
- * -12345678-+---------------+----------------------------
- *     0     | Extension Bus | D8-D15 disable, eMMC enable
- *     1     | Extension Bus | D8-D15 enable,  eMMC disable
- * -12345678-+---------------+----------------------------
- *      0    | SDHI1         | COM8 disable, COM14 enable
- *      1    | SDHI1         | COM8 enable,  COM14 disable
- * -12345678-+---------------+----------------------------
- *       0   | USB0          | COM20 enable,  COM24 disable
- *       1   | USB0          | COM20 disable, COM24 enable
- * -12345678-+---------------+----------------------------
- *        00 | JTAG          | SH-X2
- *        10 | JTAG          | ARM
- *        01 | JTAG          | -
- *        11 | JTAG          | Boundary Scan
- *-----------+---------------+----------------------------
- */
-
-/*
- * FSI-WM8978
- *
- * this command is required when playback.
- *
- * # amixer set "Headphone" 50
- *
- * this command is required when capture.
- *
- * # amixer set "Input PGA" 15
- * # amixer set "Left Input Mixer MicP" on
- * # amixer set "Left Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicP" on
- */
-
-/*
- * USB function
- *
- * When you use USB Function,
- * set SW1.6 ON, and connect cable to CN24.
- *
- * USBF needs workaround on R8A7740 chip.
- * These are a little bit complex.
- * see
- *	usbhsf_power_ctrl()
- */
-
-static void __init eva_clock_init(void)
-{
-	struct clk *system	= clk_get(NULL, "system_clk");
-	struct clk *xtal1	= clk_get(NULL, "extal1");
-	struct clk *usb24s	= clk_get(NULL, "usb24s");
-	struct clk *fsibck	= clk_get(NULL, "fsibck");
-
-	if (IS_ERR(system)	||
-	    IS_ERR(xtal1)	||
-	    IS_ERR(usb24s)	||
-	    IS_ERR(fsibck)) {
-		pr_err("armadillo800eva board clock init failed\n");
-		goto clock_error;
-	}
-
-	/* armadillo 800 eva extal1 is 24MHz */
-	clk_set_rate(xtal1, 24000000);
-
-	/* usb24s use extal1 (= system) clock (= 24MHz) */
-	clk_set_parent(usb24s, system);
-
-	/* FSIBCK is 12.288MHz, and it is parent of FSI-B */
-	clk_set_rate(fsibck, 12288000);
-
-clock_error:
-	if (!IS_ERR(system))
-		clk_put(system);
-	if (!IS_ERR(xtal1))
-		clk_put(xtal1);
-	if (!IS_ERR(usb24s))
-		clk_put(usb24s);
-	if (!IS_ERR(fsibck))
-		clk_put(fsibck);
-}
-
-/*
- * board init
- */
-static void __init eva_init(void)
-{
-	r8a7740_clock_init(MD_CK0 | MD_CK2);
-	eva_clock_init();
-
-	r8a7740_meram_workaround();
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	r8a7740_pm_init();
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Do soft power on reset */
-	writel(1 << 31, RESCNT2);
-}
-
-static const char *eva_boards_compat_dt[] __initdata = {
-	"renesas,armadillo800eva-reference",
-	NULL,
-};
-
-DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
-	.map_io		= r8a7740_map_io,
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7740_init_irq_of,
-	.init_machine	= eva_init,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= eva_boards_compat_dt,
-	.restart	= eva_restart,
-MACHINE_END

arch/arm/mach-shmobile/pm-r8a7740.c

@@ -13,7 +13,7 @@
 #include "common.h"
 #include "pm-rmobile.h"
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
 static int r8a7740_pd_a4s_suspend(void)
 {
 	/*
@@ -58,8 +58,7 @@ void __init r8a7740_init_pm_domains(void)
 	rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
 	pm_genpd_add_subdomain_names("A4S", "A3SP");
 }
-
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
 
 #ifdef CONFIG_SUSPEND
 static int r8a7740_enter_suspend(suspend_state_t suspend_state)

arch/arm/mach-shmobile/r8a7740.h

@@ -53,10 +53,10 @@ extern void r8a7740_clock_init(u8 md_ck);
 extern void r8a7740_pinmux_init(void);
 extern void r8a7740_pm_init(void);
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
 extern void __init r8a7740_init_pm_domains(void);
 #else
 static inline void r8a7740_init_pm_domains(void) {}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
 
 #endif /* __ASM_R8A7740_H__ */

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -36,6 +36,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 #include "dma-register.h"
@@ -813,10 +814,22 @@ void __init r8a7740_init_irq_of(void)
 
 static void __init r8a7740_generic_init(void)
 {
-	r8a7740_clock_init(0);
+	r8a7740_meram_workaround();
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Shared attribute override enable, 32K*8way */
+	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
+#endif
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
+#define RESCNT2 IOMEM(0xe6188020)
+static void r8a7740_restart(enum reboot_mode mode, const char *cmd)
+{
+	/* Do soft power on reset */
+	writel(1 << 31, RESCNT2);
+}
+
 static const char *r8a7740_boards_compat_dt[] __initdata = {
 	"renesas,r8a7740",
 	NULL,
@@ -829,6 +842,7 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.init_machine	= r8a7740_generic_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7740_boards_compat_dt,
+	.restart	= r8a7740_restart,
 MACHINE_END
 
 #endif /* CONFIG_USE_OF */