Commit ecc33af3 authored by Chase Southwood's avatar Chase Southwood Committed by Greg Kroah-Hartman

staging: comedi: addi_apci_1564: remove apci1564_do_config

The DO config function served the purpose of configuring the diagnostic
interrupts for the board.  As the driver currently does not support
diagnostic interrupts, the digital output subdevice does not need an
insn_config operation and this function can be safely removed.
Signed-off-by: default avatarChase Southwood <chase.southwood@gmail.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5dffac89
......@@ -87,40 +87,6 @@
#define APCI1564_TCW_WARN_TIMEVAL_REG(x) (0x18 + ((x) * 0x20))
#define APCI1564_TCW_WARN_TIMEBASE_REG(x) (0x1c + ((x) * 0x20))
/*
* Configures The Digital Output Subdevice.
*
* data[1] 0 = Disable VCC Interrupt, 1 = Enable VCC Interrupt
* data[2] 0 = Disable CC Interrupt, 1 = Enable CC Interrupt
*/
static int apci1564_do_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct apci1564_private *devpriv = dev->private;
unsigned int ul_Command = 0;
if ((data[0] != 0) && (data[0] != 1)) {
dev_err(dev->class_dev, "Data should be 1 or 0\n");
return -EINVAL;
}
if (data[1] == 1)
ul_Command = ul_Command | 0x1;
else
ul_Command = ul_Command & 0xFFFFFFFE;
if (data[2] == 1)
ul_Command = ul_Command | 0x2;
else
ul_Command = ul_Command & 0xFFFFFFFD;
outl(ul_Command, devpriv->amcc_iobase + APCI1564_DO_INT_CTRL_REG);
devpriv->tsk_current = current;
return insn->n;
}
/*
* Configures The Timer, Counter or Watchdog
*
......
......@@ -388,7 +388,6 @@ static int apci1564_auto_attach(struct comedi_device *dev,
s->n_chan = 32;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_config = apci1564_do_config;
s->insn_bits = apci1564_do_insn_bits;
/* Change-Of-State (COS) interrupt subdevice */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment