Merge branch 'next' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into next

arch/powerpc/boot/dts/bamboo.dts

@@ -269,7 +269,8 @@ PCI0: pci@ec000000 {
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x40000000
+				  0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */

arch/powerpc/boot/dts/canyonlands.dts

@@ -40,6 +40,7 @@ cpu@0 {
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
 		};
 	};
 
@@ -104,6 +105,16 @@ CPR0: cpr {
 		dcr-reg = <0x00c 0x002>;
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb-460ex", "ibm,plb4";
 		#address-cells = <2>;
@@ -343,6 +354,7 @@ PCIX0: pci@c0ec00000 {
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
@@ -373,6 +385,7 @@ PCIE0: pciex@d00000000 {
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
@@ -414,6 +427,7 @@ PCIE1: pciex@d20000000 {
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */

arch/powerpc/configs/ppc44x_defconfig

@@ -267,7 +267,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -354,7 +354,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
+CONFIG_BRIDGE=m
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -579,7 +579,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
+CONFIG_TUN=m
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
@@ -1001,11 +1001,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1418,6 +1418,6 @@ CONFIG_CRYPTO_LZO=m
 # CONFIG_PPC_CLOCK is not set
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=y
-CONFIG_KVM_BOOKE_HOST=y
+CONFIG_KVM_440=y
 # CONFIG_VIRTIO_PCI is not set
 # CONFIG_VIRTIO_BALLOON is not set

arch/powerpc/sysdev/ppc4xx_pci.c

@@ -194,11 +194,41 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
  * 4xx PCI 2.x part
  */
 
+static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller	*hose,
+					   void __iomem			*reg,
+					   u64				plb_addr,
+					   u64				pci_addr,
+					   u64				size,
+					   unsigned int			flags,
+					   int				index)
+{
+	u32 ma, pcila, pciha;
+
+	if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
+	    size < 0x1000 || (plb_addr & (size - 1)) != 0) {
+		printk(KERN_WARNING "%s: Resource out of range\n",
+		       hose->dn->full_name);
+		return -1;
+	}
+	ma = (0xffffffffu << ilog2(size)) | 1;
+	if (flags & IORESOURCE_PREFETCH)
+		ma |= 2;
+
+	pciha = RES_TO_U32_HIGH(pci_addr);
+	pcila = RES_TO_U32_LOW(pci_addr);
+
+	writel(plb_addr, reg + PCIL0_PMM0LA + (0x10 * index));
+	writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * index));
+	writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * index));
+	writel(ma, reg + PCIL0_PMM0MA + (0x10 * index));
+
+	return 0;
+}
+
 static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,
 					     void __iomem *reg)
 {
-	u32 la, ma, pcila, pciha;
-	int i, j;
+	int i, j, found_isa_hole = 0;
 
 	/* Setup outbound memory windows */
 	for (i = j = 0; i < 3; i++) {
@@ -213,28 +243,29 @@ static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,
 			break;
 		}
 
-		/* Calculate register values */
-		la = res->start;
-		pciha = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
-		pcila = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
+		/* Configure the resource */
+		if (ppc4xx_setup_one_pci_PMM(hose, reg,
+					     res->start,
+					     res->start - hose->pci_mem_offset,
+					     res->end + 1 - res->start,
+					     res->flags,
+					     j) == 0) {
+			j++;
 
-		ma = res->end + 1 - res->start;
-		if (!is_power_of_2(ma) || ma < 0x1000 || ma > 0xffffffffu) {
-			printk(KERN_WARNING "%s: Resource out of range\n",
-			       hose->dn->full_name);
-			continue;
+			/* If the resource PCI address is 0 then we have our
+			 * ISA memory hole
+			 */
+			if (res->start == hose->pci_mem_offset)
+				found_isa_hole = 1;
 		}
-		ma = (0xffffffffu << ilog2(ma)) | 0x1;
-		if (res->flags & IORESOURCE_PREFETCH)
-			ma |= 0x2;
-
-		/* Program register values */
-		writel(la, reg + PCIL0_PMM0LA + (0x10 * j));
-		writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * j));
-		writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * j));
-		writel(ma, reg + PCIL0_PMM0MA + (0x10 * j));
-		j++;
 	}
+
+	/* Handle ISA memory hole if not already covered */
+	if (j <= 2 && !found_isa_hole && hose->isa_mem_size)
+		if (ppc4xx_setup_one_pci_PMM(hose, reg, hose->isa_mem_phys, 0,
+					     hose->isa_mem_size, 0, j) == 0)
+			printk(KERN_INFO "%s: Legacy ISA memory support enabled\n",
+			       hose->dn->full_name);
 }
 
 static void __init ppc4xx_configure_pci_PTMs(struct pci_controller *hose,
@@ -352,41 +383,32 @@ static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
  * 4xx PCI-X part
  */
 
-static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,
-					      void __iomem *reg)
+static int __init ppc4xx_setup_one_pcix_POM(struct pci_controller	*hose,
+					    void __iomem		*reg,
+					    u64				plb_addr,
+					    u64				pci_addr,
+					    u64				size,
+					    unsigned int		flags,
+					    int				index)
 {
 	u32 lah, lal, pciah, pcial, sa;
-	int i, j;
-
-	/* Setup outbound memory windows */
-	for (i = j = 0; i < 3; i++) {
-		struct resource *res = &hose->mem_resources[i];
 
-		/* we only care about memory windows */
-		if (!(res->flags & IORESOURCE_MEM))
-			continue;
-		if (j > 1) {
-			printk(KERN_WARNING "%s: Too many ranges\n",
+	if (!is_power_of_2(size) || size < 0x1000 ||
+	    (plb_addr & (size - 1)) != 0) {
+		printk(KERN_WARNING "%s: Resource out of range\n",
 		       hose->dn->full_name);
-			break;
+		return -1;
 	}
 
 	/* Calculate register values */
-		lah = RES_TO_U32_HIGH(res->start);
-		lal = RES_TO_U32_LOW(res->start);
-		pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
-		pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
-		sa = res->end + 1 - res->start;
-		if (!is_power_of_2(sa) || sa < 0x100000 ||
-		    sa > 0xffffffffu) {
-			printk(KERN_WARNING "%s: Resource out of range\n",
-			       hose->dn->full_name);
-			continue;
-		}
-		sa = (0xffffffffu << ilog2(sa)) | 0x1;
+	lah = RES_TO_U32_HIGH(plb_addr);
+	lal = RES_TO_U32_LOW(plb_addr);
+	pciah = RES_TO_U32_HIGH(pci_addr);
+	pcial = RES_TO_U32_LOW(pci_addr);
+	sa = (0xffffffffu << ilog2(size)) | 0x1;
 
 	/* Program register values */
-		if (j == 0) {
+	if (index == 0) {
 		writel(lah, reg + PCIX0_POM0LAH);
 		writel(lal, reg + PCIX0_POM0LAL);
 		writel(pciah, reg + PCIX0_POM0PCIAH);
@@ -399,8 +421,51 @@ static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,
 		writel(pcial, reg + PCIX0_POM1PCIAL);
 		writel(sa, reg + PCIX0_POM1SA);
 	}
+
+	return 0;
+}
+
+static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose,
+					      void __iomem *reg)
+{
+	int i, j, found_isa_hole = 0;
+
+	/* Setup outbound memory windows */
+	for (i = j = 0; i < 3; i++) {
+		struct resource *res = &hose->mem_resources[i];
+
+		/* we only care about memory windows */
+		if (!(res->flags & IORESOURCE_MEM))
+			continue;
+		if (j > 1) {
+			printk(KERN_WARNING "%s: Too many ranges\n",
+			       hose->dn->full_name);
+			break;
+		}
+
+		/* Configure the resource */
+		if (ppc4xx_setup_one_pcix_POM(hose, reg,
+					      res->start,
+					      res->start - hose->pci_mem_offset,
+					      res->end + 1 - res->start,
+					      res->flags,
+					      j) == 0) {
 			j++;
+
+			/* If the resource PCI address is 0 then we have our
+			 * ISA memory hole
+			 */
+			if (res->start == hose->pci_mem_offset)
+				found_isa_hole = 1;
+		}
 	}
+
+	/* Handle ISA memory hole if not already covered */
+	if (j <= 1 && !found_isa_hole && hose->isa_mem_size)
+		if (ppc4xx_setup_one_pcix_POM(hose, reg, hose->isa_mem_phys, 0,
+					      hose->isa_mem_size, 0, j) == 0)
+			printk(KERN_INFO "%s: Legacy ISA memory support enabled\n",
+			       hose->dn->full_name);
 }
 
 static void __init ppc4xx_configure_pcix_PIMs(struct pci_controller *hose,
@@ -1317,48 +1382,42 @@ static struct pci_ops ppc4xx_pciex_pci_ops =
 	.write = ppc4xx_pciex_write_config,
 };
 
-static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
+static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port	*port,
 					     struct pci_controller	*hose,
-					       void __iomem *mbase)
+					     void __iomem		*mbase,
+					     u64			plb_addr,
+					     u64			pci_addr,
+					     u64			size,
+					     unsigned int		flags,
+					     int			index)
 {
 	u32 lah, lal, pciah, pcial, sa;
-	int i, j;
-
-	/* Setup outbound memory windows */
-	for (i = j = 0; i < 3; i++) {
-		struct resource *res = &hose->mem_resources[i];
 
-		/* we only care about memory windows */
-		if (!(res->flags & IORESOURCE_MEM))
-			continue;
-		if (j > 1) {
-			printk(KERN_WARNING "%s: Too many ranges\n",
-			       port->node->full_name);
-			break;
+	if (!is_power_of_2(size) ||
+	    (index < 2 && size < 0x100000) ||
+	    (index == 2 && size < 0x100) ||
+	    (plb_addr & (size - 1)) != 0) {
+		printk(KERN_WARNING "%s: Resource out of range\n",
+		       hose->dn->full_name);
+		return -1;
 	}
 
 	/* Calculate register values */
-		lah = RES_TO_U32_HIGH(res->start);
-		lal = RES_TO_U32_LOW(res->start);
-		pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
-		pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
-		sa = res->end + 1 - res->start;
-		if (!is_power_of_2(sa) || sa < 0x100000 ||
-		    sa > 0xffffffffu) {
-			printk(KERN_WARNING "%s: Resource out of range\n",
-			       port->node->full_name);
-			continue;
-		}
-		sa = (0xffffffffu << ilog2(sa)) | 0x1;
+	lah = RES_TO_U32_HIGH(plb_addr);
+	lal = RES_TO_U32_LOW(plb_addr);
+	pciah = RES_TO_U32_HIGH(pci_addr);
+	pcial = RES_TO_U32_LOW(pci_addr);
+	sa = (0xffffffffu << ilog2(size)) | 0x1;
 
 	/* Program register values */
-		switch (j) {
+	switch (index) {
 	case 0:
 		out_le32(mbase + PECFG_POM0LAH, pciah);
 		out_le32(mbase + PECFG_POM0LAL, pcial);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
+		/* Note that 3 here means enabled | single region */
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
 		break;
 	case 1:
@@ -1367,23 +1426,74 @@ static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
+		/* Note that 3 here means enabled | single region */
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
 		break;
-		}
-		j++;
-	}
-
-	/* Configure IO, always 64K starting at 0 */
-	if (hose->io_resource.flags & IORESOURCE_IO) {
-		lah = RES_TO_U32_HIGH(hose->io_base_phys);
-		lal = RES_TO_U32_LOW(hose->io_base_phys);
-		out_le32(mbase + PECFG_POM2LAH, 0);
-		out_le32(mbase + PECFG_POM2LAL, 0);
+	case 2:
+		out_le32(mbase + PECFG_POM2LAH, pciah);
+		out_le32(mbase + PECFG_POM2LAL, pcial);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAH, lah);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
-		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0xffff0000 | 3);
+		/* Note that 3 here means enabled | IO space !!! */
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, sa | 3);
+		break;
+	}
+
+	return 0;
+}
+
+static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
+					       struct pci_controller *hose,
+					       void __iomem *mbase)
+{
+	int i, j, found_isa_hole = 0;
+
+	/* Setup outbound memory windows */
+	for (i = j = 0; i < 3; i++) {
+		struct resource *res = &hose->mem_resources[i];
+
+		/* we only care about memory windows */
+		if (!(res->flags & IORESOURCE_MEM))
+			continue;
+		if (j > 1) {
+			printk(KERN_WARNING "%s: Too many ranges\n",
+			       port->node->full_name);
+			break;
+		}
+
+		/* Configure the resource */
+		if (ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+					       res->start,
+					       res->start - hose->pci_mem_offset,
+					       res->end + 1 - res->start,
+					       res->flags,
+					       j) == 0) {
+			j++;
+
+			/* If the resource PCI address is 0 then we have our
+			 * ISA memory hole
+			 */
+			if (res->start == hose->pci_mem_offset)
+				found_isa_hole = 1;
+		}
 	}
+
+	/* Handle ISA memory hole if not already covered */
+	if (j <= 1 && !found_isa_hole && hose->isa_mem_size)
+		if (ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+					       hose->isa_mem_phys, 0,
+					       hose->isa_mem_size, 0, j) == 0)
+			printk(KERN_INFO "%s: Legacy ISA memory support enabled\n",
+			       hose->dn->full_name);
+
+	/* Configure IO, always 64K starting at 0. We hard wire it to 64K !
+	 * Note also that it -has- to be region index 2 on this HW
+	 */
+	if (hose->io_resource.flags & IORESOURCE_IO)
+		ppc4xx_setup_one_pciex_POM(port, hose, mbase,
+					   hose->io_base_phys, 0,
+					   0x10000, IORESOURCE_IO, 2);
 }
 
 static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,