virtio: Add platform bus driver for memory mapped virtio device

This patch, based on virtio PCI driver, adds support for memory
mapped (platform) virtio device. This should allow environments
like qemu to use virtio-based block & network devices even on
platforms without PCI support.

One can define and register a platform device which resources
will describe memory mapped control registers and "mailbox"
interrupt. Such device can be also instantiated using the Device
Tree node with compatible property equal "virtio,mmio".

Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Michael S.Tsirkin <mst@redhat.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Documentation/devicetree/bindings/virtio/mmio.txt

+* virtio memory mapped device
+
+See http://ozlabs.org/~rusty/virtio-spec/ for more details.
+
+Required properties:
+
+- compatible:	"virtio,mmio" compatibility string
+- reg:		control registers base address and size including configuration space
+- interrupts:	interrupt generated by the device
+
+Example:
+
+	virtio_block@3000 {
+		compatible = "virtio,mmio";
+		reg = <0x3000 0x100>;
+		interrupts = <41>;
+	}

drivers/virtio/Kconfig

@@ -35,4 +35,15 @@ config VIRTIO_BALLOON
 
 	 If unsure, say M.
 
+ config VIRTIO_MMIO
+ 	tristate "Platform bus driver for memory mapped virtio devices (EXPERIMENTAL)"
+ 	depends on EXPERIMENTAL
+ 	select VIRTIO
+ 	select VIRTIO_RING
+ 	---help---
+ 	 This drivers provides support for memory mapped virtio
+	 platform device driver.
+
+ 	 If unsure, say N.
+
 endmenu

drivers/virtio/Makefile

 obj-$(CONFIG_VIRTIO) += virtio.o
 obj-$(CONFIG_VIRTIO_RING) += virtio_ring.o
+obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
 obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
 obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o

include/linux/virtio_mmio.h

+/*
+ * Virtio platform device driver
+ *
+ * Copyright 2011, ARM Ltd.
+ *
+ * Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_MMIO_H
+#define _LINUX_VIRTIO_MMIO_H
+
+/*
+ * Control registers
+ */
+
+/* Magic value ("virt" string) - Read Only */
+#define VIRTIO_MMIO_MAGIC_VALUE		0x000
+
+/* Virtio device version - Read Only */
+#define VIRTIO_MMIO_VERSION		0x004
+
+/* Virtio device ID - Read Only */
+#define VIRTIO_MMIO_DEVICE_ID		0x008
+
+/* Virtio vendor ID - Read Only */
+#define VIRTIO_MMIO_VENDOR_ID		0x00c
+
+/* Bitmask of the features supported by the host
+ * (32 bits per set) - Read Only */
+#define VIRTIO_MMIO_HOST_FEATURES	0x010
+
+/* Host features set selector - Write Only */
+#define VIRTIO_MMIO_HOST_FEATURES_SEL	0x014
+
+/* Bitmask of features activated by the guest
+ * (32 bits per set) - Write Only */
+#define VIRTIO_MMIO_GUEST_FEATURES	0x020
+
+/* Activated features set selector - Write Only */
+#define VIRTIO_MMIO_GUEST_FEATURES_SET	0x024
+
+/* Guest's memory page size in bytes - Write Only */
+#define VIRTIO_MMIO_GUEST_PAGE_SIZE	0x028
+
+/* Queue selector - Write Only */
+#define VIRTIO_MMIO_QUEUE_SEL		0x030
+
+/* Maximum size of the currently selected queue - Read Only */
+#define VIRTIO_MMIO_QUEUE_NUM_MAX	0x034
+
+/* Queue size for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_NUM		0x038
+
+/* Used Ring alignment for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_ALIGN		0x03c
+
+/* Guest's PFN for the currently selected queue - Read Write */
+#define VIRTIO_MMIO_QUEUE_PFN		0x040
+
+/* Queue notifier - Write Only */
+#define VIRTIO_MMIO_QUEUE_NOTIFY	0x050
+
+/* Interrupt status - Read Only */
+#define VIRTIO_MMIO_INTERRUPT_STATUS	0x060
+
+/* Interrupt acknowledge - Write Only */
+#define VIRTIO_MMIO_INTERRUPT_ACK	0x064
+
+/* Device status register - Read Write */
+#define VIRTIO_MMIO_STATUS		0x070
+
+/* The config space is defined by each driver as
+ * the per-driver configuration space - Read Write */
+#define VIRTIO_MMIO_CONFIG		0x100
+
+
+
+/*
+ * Interrupt flags (re: interrupt status & acknowledge registers)
+ */
+
+#define VIRTIO_MMIO_INT_VRING		(1 << 0)
+#define VIRTIO_MMIO_INT_CONFIG		(1 << 1)
+
+#endif