Commit f05f8198 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 - Minor updates and fixes to the Octeon ethernet driver in staging
 - A fix to VGA_MAP_MEM() for 64 bit platforms
 - Fix a workaround for 74K/1074K processors
 - The symlink arch/mips/boot/dts/include/dt-bindings was pointing to a
   a file with a name ending in \n.  I think this may have been caused
   by a git bug with with patches sent by email
 - A build fix for VGA console on BCM1480-based systems
 - Fix PCI device access via "/sys/bus/pci/.../resource0" or similar
   work for Alchemy platforms
 - Fix potential data leak on MIPS R5 cores.  This doesn't add proper
   support for any R5 features, just ensures a kernel without such
   support will be secure to run
 - Adding a macros for the CP0 Config5 register to be used by the R5 fix
 - Make get_cycles() actually return something useful where possible
   This also requires a preparatory patch for performance sake
 - Fix a warning about the use of smp_processor_id() in preemptible
   code.  Again this includes a preparatory patch adding the
   infrastructure to be used by the actual patch
 - Finally remove pointless one-line comment

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix invalid symbolic link file
  MIPS: PCI: pci-bcm1480: Include missing vt.h header
  MIPS: Disable usermode switching of the FR bit for MIPS R5 CPUs.
  MIPS: Add MIPS R5 config5 register.
  MIPS: PCI: Use pci_resource_to_user to map pci memory space properly
  MIPS: 74K/1074K: Correct erratum workaround.
  MIPS: Cleanup CP0 PRId and CP1 FPIR register access masks
  MIPS: Remove useless comment about kprobe from arch/mips/Makefile
  MIPS: Fix VGA_MAP_MEM macro.
  MIPS: Reimplement get_cycles().
  MIPS: Optimize current_cpu_type() for better code.
  MIPS: Fix accessing to per-cpu data when flushing the cache
  MIPS: Provide nice way to access boot CPU's data.
  staging: octeon-ethernet: rgmii: enable interrupts that we can handle
  staging: octeon-ethernet: remove skb alloc failure warnings
  staging: octeon-ethernet: make dropped packets to consume NAPI budget
parents e9ff04dd 66b10574
......@@ -288,9 +288,6 @@ endif
vmlinux.32: vmlinux
$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
#obj-$(CONFIG_KPROBES) += kprobes.o
#
# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
# ELF files from 32-bit files by conversion.
......
......@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/syscore_ops.h>
#include <asm/cpu.h>
#include <asm/mach-au1x00/au1000.h>
/* control register offsets */
......@@ -358,7 +359,7 @@ static inline int au1200_coherency_bug(void)
{
#if defined(CONFIG_DMA_COHERENT)
/* Au1200 AB USB does not support coherent memory */
if (!(read_c0_prid() & 0xff)) {
if (!(read_c0_prid() & PRID_REV_MASK)) {
printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
printk(KERN_INFO "Au1200 USB: update your board or re-configure"
" the kernel\n");
......
......@@ -306,14 +306,14 @@ void __init bcm63xx_cpu_init(void)
switch (c->cputype) {
case CPU_BMIPS3300:
if ((read_c0_prid() & 0xff00) != PRID_IMP_BMIPS3300_ALT)
if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
__cpu_name[cpu] = "Broadcom BCM6338";
/* fall-through */
case CPU_BMIPS32:
chipid_reg = BCM_6345_PERF_BASE;
break;
case CPU_BMIPS4350:
switch ((read_c0_prid() & 0xff)) {
switch ((read_c0_prid() & PRID_REV_MASK)) {
case 0x04:
chipid_reg = BCM_3368_PERF_BASE;
break;
......
......@@ -12,6 +12,7 @@
#include <linux/smp.h>
#include <asm/cpu-info.h>
#include <asm/cpu-type.h>
#include <asm/time.h>
#include <asm/octeon/octeon.h>
......
......@@ -13,6 +13,7 @@
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/cpu-type.h>
#include <asm/processor.h>
#include <asm/dec/prom.h>
......
......@@ -13,12 +13,6 @@
#include <asm/cpu-info.h>
#include <cpu-feature-overrides.h>
#ifndef current_cpu_type
#define current_cpu_type() current_cpu_data.cputype
#endif
#define boot_cpu_type() cpu_data[0].cputype
/*
* SMP assumption: Options of CPU 0 are a superset of all processors.
* This is true for all known MIPS systems.
......
......@@ -84,6 +84,7 @@ struct cpuinfo_mips {
extern struct cpuinfo_mips cpu_data[];
#define current_cpu_data cpu_data[smp_processor_id()]
#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
#define boot_cpu_data cpu_data[0]
extern void cpu_probe(void);
extern void cpu_report(void);
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003, 2004 Ralf Baechle
* Copyright (C) 2004 Maciej W. Rozycki
*/
#ifndef __ASM_CPU_TYPE_H
#define __ASM_CPU_TYPE_H
#include <linux/smp.h>
#include <linux/compiler.h>
static inline int __pure __get_cpu_type(const int cpu_type)
{
switch (cpu_type) {
#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \
defined(CONFIG_SYS_HAS_CPU_LOONGSON2F)
case CPU_LOONGSON2:
#endif
#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B
case CPU_LOONGSON1:
#endif
#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1
case CPU_4KC:
case CPU_ALCHEMY:
case CPU_BMIPS3300:
case CPU_BMIPS4350:
case CPU_PR4450:
case CPU_BMIPS32:
case CPU_JZRISC:
#endif
#if defined(CONFIG_SYS_HAS_CPU_MIPS32_R1) || \
defined(CONFIG_SYS_HAS_CPU_MIPS32_R2)
case CPU_4KEC:
#endif
#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R2
case CPU_4KSC:
case CPU_24K:
case CPU_34K:
case CPU_1004K:
case CPU_74K:
case CPU_M14KC:
case CPU_M14KEC:
#endif
#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R1
case CPU_5KC:
case CPU_5KE:
case CPU_20KC:
case CPU_25KF:
case CPU_SB1:
case CPU_SB1A:
#endif
#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R2
/*
* All MIPS64 R2 processors have their own special symbols. That is,
* there currently is no pure R2 core
*/
#endif
#ifdef CONFIG_SYS_HAS_CPU_R3000
case CPU_R2000:
case CPU_R3000:
case CPU_R3000A:
case CPU_R3041:
case CPU_R3051:
case CPU_R3052:
case CPU_R3081:
case CPU_R3081E:
#endif
#ifdef CONFIG_SYS_HAS_CPU_TX39XX
case CPU_TX3912:
case CPU_TX3922:
case CPU_TX3927:
#endif
#ifdef CONFIG_SYS_HAS_CPU_VR41XX
case CPU_VR41XX:
case CPU_VR4111:
case CPU_VR4121:
case CPU_VR4122:
case CPU_VR4131:
case CPU_VR4133:
case CPU_VR4181:
case CPU_VR4181A:
#endif
#ifdef CONFIG_SYS_HAS_CPU_R4300
case CPU_R4300:
case CPU_R4310:
#endif
#ifdef CONFIG_SYS_HAS_CPU_R4X00
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
case CPU_R4200:
case CPU_R4400PC:
case CPU_R4400SC:
case CPU_R4400MC:
case CPU_R4600:
case CPU_R4700:
case CPU_R4640:
case CPU_R4650:
#endif
#ifdef CONFIG_SYS_HAS_CPU_TX49XX
case CPU_TX49XX:
#endif
#ifdef CONFIG_SYS_HAS_CPU_R5000
case CPU_R5000:
#endif
#ifdef CONFIG_SYS_HAS_CPU_R5432
case CPU_R5432:
#endif
#ifdef CONFIG_SYS_HAS_CPU_R5500
case CPU_R5500:
#endif
#ifdef CONFIG_SYS_HAS_CPU_R6000
case CPU_R6000:
case CPU_R6000A:
#endif
#ifdef CONFIG_SYS_HAS_CPU_NEVADA
case CPU_NEVADA:
#endif
#ifdef CONFIG_SYS_HAS_CPU_R8000
case CPU_R8000:
#endif
#ifdef CONFIG_SYS_HAS_CPU_R10000
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
#endif
#ifdef CONFIG_SYS_HAS_CPU_RM7000
case CPU_RM7000:
case CPU_SR71000:
#endif
#ifdef CONFIG_SYS_HAS_CPU_RM9000
case CPU_RM9000:
#endif
#ifdef CONFIG_SYS_HAS_CPU_SB1
case CPU_SB1:
case CPU_SB1A:
#endif
#ifdef CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON
case CPU_CAVIUM_OCTEON:
case CPU_CAVIUM_OCTEON_PLUS:
case CPU_CAVIUM_OCTEON2:
#endif
#ifdef CONFIG_SYS_HAS_CPU_BMIPS4380
case CPU_BMIPS4380:
#endif
#ifdef CONFIG_SYS_HAS_CPU_BMIPS5000
case CPU_BMIPS5000:
#endif
#ifdef CONFIG_SYS_HAS_CPU_XLP
case CPU_XLP:
#endif
#ifdef CONFIG_SYS_HAS_CPU_XLR
case CPU_XLR:
#endif
break;
default:
unreachable();
}
return cpu_type;
}
static inline int __pure current_cpu_type(void)
{
const int cpu_type = current_cpu_data.cputype;
return __get_cpu_type(cpu_type);
}
static inline int __pure boot_cpu_type(void)
{
const int cpu_type = cpu_data[0].cputype;
return __get_cpu_type(cpu_type);
}
#endif /* __ASM_CPU_TYPE_H */
......@@ -3,15 +3,14 @@
* various MIPS cpu types.
*
* Copyright (C) 1996 David S. Miller (davem@davemloft.net)
* Copyright (C) 2004 Maciej W. Rozycki
* Copyright (C) 2004, 2013 Maciej W. Rozycki
*/
#ifndef _ASM_CPU_H
#define _ASM_CPU_H
/* Assigned Company values for bits 23:16 of the PRId Register
(CP0 register 15, select 0). As of the MIPS32 and MIPS64 specs from
MTI, the PRId register is defined in this (backwards compatible)
way:
/*
As of the MIPS32 and MIPS64 specs from MTI, the PRId register (CP0
register 15, select 0) is defined in this (backwards compatible) way:
+----------------+----------------+----------------+----------------+
| Company Options| Company ID | Processor ID | Revision |
......@@ -23,6 +22,14 @@
spec.
*/
#define PRID_OPT_MASK 0xff000000
/*
* Assigned Company values for bits 23:16 of the PRId register.
*/
#define PRID_COMP_MASK 0xff0000
#define PRID_COMP_LEGACY 0x000000
#define PRID_COMP_MIPS 0x010000
#define PRID_COMP_BROADCOM 0x020000
......@@ -38,10 +45,17 @@
#define PRID_COMP_INGENIC 0xd00000
/*
* Assigned values for the product ID register. In order to detect a
* certain CPU type exactly eventually additional registers may need to
* be examined. These are valid when 23:16 == PRID_COMP_LEGACY
* Assigned Processor ID (implementation) values for bits 15:8 of the PRId
* register. In order to detect a certain CPU type exactly eventually
* additional registers may need to be examined.
*/
#define PRID_IMP_MASK 0xff00
/*
* These are valid when 23:16 == PRID_COMP_LEGACY
*/
#define PRID_IMP_R2000 0x0100
#define PRID_IMP_AU1_REV1 0x0100
#define PRID_IMP_AU1_REV2 0x0200
......@@ -182,11 +196,15 @@
#define PRID_IMP_NETLOGIC_XLP2XX 0x1200
/*
* Definitions for 7:0 on legacy processors
* Particular Revision values for bits 7:0 of the PRId register.
*/
#define PRID_REV_MASK 0x00ff
/*
* Definitions for 7:0 on legacy processors
*/
#define PRID_REV_TX4927 0x0022
#define PRID_REV_TX4937 0x0030
#define PRID_REV_R4400 0x0040
......@@ -227,6 +245,8 @@
* 31 16 15 8 7 0
*/
#define FPIR_IMP_MASK 0xff00
#define FPIR_IMP_NONE 0x0000
enum cpu_type_enum {
......
......@@ -43,6 +43,8 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <asm/cpu.h>
/* cpu pipeline flush */
void static inline au_sync(void)
{
......@@ -140,7 +142,7 @@ static inline int au1xxx_cpu_needs_config_od(void)
static inline int alchemy_get_cputype(void)
{
switch (read_c0_prid() & 0xffff0000) {
switch (read_c0_prid() & (PRID_OPT_MASK | PRID_COMP_MASK)) {
case 0x00030000:
return ALCHEMY_CPU_AU1000;
break;
......
......@@ -8,6 +8,8 @@
#ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
#include <asm/cpu.h>
/*
* IP22 with a variety of processors so we can't use defaults for everything.
*/
......
......@@ -8,6 +8,8 @@
#ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
#include <asm/cpu.h>
/*
* IP27 only comes with R10000 family processors all using the same config
*/
......
......@@ -9,6 +9,8 @@
#ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
#include <asm/cpu.h>
/*
* IP28 only comes with R10000 family processors all using the same config
*/
......
......@@ -603,6 +603,13 @@
#define MIPS_CONF4_MMUEXTDEF (_ULCAST_(3) << 14)
#define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14)
#define MIPS_CONF5_NF (_ULCAST_(1) << 0)
#define MIPS_CONF5_UFR (_ULCAST_(1) << 2)
#define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27)
#define MIPS_CONF5_EVA (_ULCAST_(1) << 28)
#define MIPS_CONF5_CV (_ULCAST_(1) << 29)
#define MIPS_CONF5_K (_ULCAST_(1) << 30)
#define MIPS_CONF6_SYND (_ULCAST_(1) << 13)
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
......
......@@ -83,6 +83,18 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
#define HAVE_ARCH_PCI_RESOURCE_TO_USER
static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc, resource_size_t *start,
resource_size_t *end)
{
phys_t size = resource_size(rsrc);
*start = fixup_bigphys_addr(rsrc->start, size);
*end = rsrc->start + size;
}
/*
* Dynamic DMA mapping stuff.
* MIPS has everything mapped statically.
......
......@@ -10,7 +10,9 @@
#ifdef __KERNEL__
#include <asm/cpu-features.h>
#include <asm/mipsregs.h>
#include <asm/cpu-type.h>
/*
* This is the clock rate of the i8253 PIT. A MIPS system may not have
......@@ -33,9 +35,38 @@
typedef unsigned int cycles_t;
/*
* On R4000/R4400 before version 5.0 an erratum exists such that if the
* cycle counter is read in the exact moment that it is matching the
* compare register, no interrupt will be generated.
*
* There is a suggested workaround and also the erratum can't strike if
* the compare interrupt isn't being used as the clock source device.
* However for now the implementaton of this function doesn't get these
* fine details right.
*/
static inline cycles_t get_cycles(void)
{
return 0;
switch (boot_cpu_type()) {
case CPU_R4400PC:
case CPU_R4400SC:
case CPU_R4400MC:
if ((read_c0_prid() & 0xff) >= 0x0050)
return read_c0_count();
break;
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
break;
default:
if (cpu_has_counter)
return read_c0_count();
break;
}
return 0; /* no usable counter */
}
#endif /* __KERNEL__ */
......
......@@ -6,6 +6,7 @@
#ifndef _ASM_VGA_H
#define _ASM_VGA_H
#include <asm/addrspace.h>
#include <asm/byteorder.h>
/*
......@@ -13,7 +14,7 @@
* access the videoram directly without any black magic.
*/
#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x))
#define VGA_MAP_MEM(x, s) CKSEG1ADDR(0x10000000L + (unsigned long)(x))
#define vga_readb(x) (*(x))
#define vga_writeb(x, y) (*(y) = (x))
......
......@@ -20,6 +20,7 @@
#include <asm/bugs.h>
#include <asm/cpu.h>
#include <asm/cpu-type.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include <asm/watch.h>
......@@ -55,7 +56,7 @@ static inline void check_errata(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
switch (c->cputype) {
switch (current_cpu_type()) {
case CPU_34K:
/*
* Erratum "RPS May Cause Incorrect Instruction Execution"
......@@ -122,7 +123,7 @@ static inline unsigned long cpu_get_fpu_id(void)
*/
static inline int __cpu_has_fpu(void)
{
return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
return ((cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE);
}
static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
......@@ -290,6 +291,17 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
return config4 & MIPS_CONF_M;
}
static inline unsigned int decode_config5(struct cpuinfo_mips *c)
{
unsigned int config5;
config5 = read_c0_config5();
config5 &= ~MIPS_CONF5_UFR;
write_c0_config5(config5);
return config5 & MIPS_CONF_M;
}
static void decode_configs(struct cpuinfo_mips *c)
{
int ok;
......@@ -310,6 +322,8 @@ static void decode_configs(struct cpuinfo_mips *c)
ok = decode_config3(c);
if (ok)
ok = decode_config4(c);
if (ok)
ok = decode_config5(c);
mips_probe_watch_registers(c);
......@@ -322,7 +336,7 @@ static void decode_configs(struct cpuinfo_mips *c)
static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
{
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_R2000:
c->cputype = CPU_R2000;
__cpu_name[cpu] = "R2000";
......@@ -333,7 +347,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
c->tlbsize = 64;
break;
case PRID_IMP_R3000:
if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) {
if (cpu_has_confreg()) {
c->cputype = CPU_R3081E;
__cpu_name[cpu] = "R3081";
......@@ -353,7 +367,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
break;
case PRID_IMP_R4000:
if (read_c0_config() & CONF_SC) {
if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
if ((c->processor_id & PRID_REV_MASK) >=
PRID_REV_R4400) {
c->cputype = CPU_R4400PC;
__cpu_name[cpu] = "R4400PC";
} else {
......@@ -361,7 +376,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "R4000PC";
}
} else {
if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
if ((c->processor_id & PRID_REV_MASK) >=
PRID_REV_R4400) {
c->cputype = CPU_R4400SC;
__cpu_name[cpu] = "R4400SC";
} else {
......@@ -454,7 +470,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "TX3927";
c->tlbsize = 64;
} else {
switch (c->processor_id & 0xff) {
switch (c->processor_id & PRID_REV_MASK) {
case PRID_REV_TX3912:
c->cputype = CPU_TX3912;
__cpu_name[cpu] = "TX3912";
......@@ -640,7 +656,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
__cpu_name[cpu] = "MIPS 4Kc";
......@@ -711,7 +727,7 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_AU1_REV1:
case PRID_IMP_AU1_REV2:
c->cputype = CPU_ALCHEMY;
......@@ -730,7 +746,7 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
break;
case 4:
__cpu_name[cpu] = "Au1200";
if ((c->processor_id & 0xff) == 2)
if ((c->processor_id & PRID_REV_MASK) == 2)
__cpu_name[cpu] = "Au1250";
break;
case 5:
......@@ -748,12 +764,12 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
__cpu_name[cpu] = "SiByte SB1";
/* FPU in pass1 is known to have issues. */
if ((c->processor_id & 0xff) < 0x02)
if ((c->processor_id & PRID_REV_MASK) < 0x02)
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:
......@@ -766,7 +782,7 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_SR71000:
c->cputype = CPU_SR71000;
__cpu_name[cpu] = "Sandcraft SR71000";
......@@ -779,7 +795,7 @@ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_PR4450:
c->cputype = CPU_PR4450;
__cpu_name[cpu] = "Philips PR4450";
......@@ -791,7 +807,7 @@ static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_BMIPS32_REV4:
case PRID_IMP_BMIPS32_REV8:
c->cputype = CPU_BMIPS32;
......@@ -806,7 +822,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
set_elf_platform(cpu, "bmips3300");
break;
case PRID_IMP_BMIPS43XX: {
int rev = c->processor_id & 0xff;
int rev = c->processor_id & PRID_REV_MASK;
if (rev >= PRID_REV_BMIPS4380_LO &&
rev <= PRID_REV_BMIPS4380_HI) {
......@@ -832,7 +848,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_CAVIUM_CN38XX:
case PRID_IMP_CAVIUM_CN31XX:
case PRID_IMP_CAVIUM_CN30XX:
......@@ -875,7 +891,7 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
decode_configs(c);
/* JZRISC does not implement the CP0 counter. */
c->options &= ~MIPS_CPU_COUNTER;
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_JZRISC:
c->cputype = CPU_JZRISC;
__cpu_name[cpu] = "Ingenic JZRISC";
......@@ -890,7 +906,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
{
decode_configs(c);
if ((c->processor_id & 0xff00) == PRID_IMP_NETLOGIC_AU13XX) {
if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_NETLOGIC_AU13XX) {
c->cputype = CPU_ALCHEMY;
__cpu_name[cpu] = "Au1300";
/* following stuff is not for Alchemy */
......@@ -905,7 +921,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
MIPS_CPU_EJTAG |
MIPS_CPU_LLSC);
switch (c->processor_id & 0xff00) {
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_NETLOGIC_XLP2XX:
c->cputype = CPU_XLP;
__cpu_name[cpu] = "Broadcom XLPII";
......@@ -984,7 +1000,7 @@ void cpu_probe(void)
c->cputype = CPU_UNKNOWN;
c->processor_id = read_c0_prid();
switch (c->processor_id & 0xff0000) {
switch (c->processor_id & PRID_COMP_MASK) {
case PRID_COMP_LEGACY:
cpu_probe_legacy(c, cpu);
break;
......
......@@ -18,6 +18,7 @@
#include <linux/sched.h>
#include <asm/cpu.h>
#include <asm/cpu-info.h>
#include <asm/cpu-type.h>
#include <asm/idle.h>
#include <asm/mipsregs.h>
......@@ -136,7 +137,7 @@ void __init check_wait(void)
return;
}
switch (c->cputype) {
switch (current_cpu_type()) {
case CPU_R3081:
case CPU_R3081E:
cpu_wait = r3081_wait;
......
......@@ -24,6 +24,7 @@
#include <linux/export.h>
#include <asm/cpu-features.h>
#include <asm/cpu-type.h>
#include <asm/div64.h>
#include <asm/smtc_ipi.h>
#include <asm/time.h>
......
......@@ -39,6 +39,7 @@
#include <asm/break.h>
#include <asm/cop2.h>
#include <asm/cpu.h>
#include <asm/cpu-type.h>
#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
......@@ -622,7 +623,7 @@ static int simulate_rdhwr(struct pt_regs *regs, int rd, int rt)
regs->regs[rt] = read_c0_count();
return 0;
case 3: /* Count register resolution */
switch (current_cpu_data.cputype) {
switch (current_cpu_type()) {
case CPU_20KC:
case CPU_25KF:
regs->regs[rt] = 1;
......
......@@ -19,6 +19,7 @@
#include <asm/bootinfo.h>
#include <asm/cacheops.h>
#include <asm/cpu-features.h>
#include <asm/cpu-type.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/r4kcache.h>
......@@ -186,9 +187,10 @@ static void probe_octeon(void)
unsigned long dcache_size;
unsigned int config1;
struct cpuinfo_mips *c = &current_cpu_data;
int cputype = current_cpu_type();
config1 = read_c0_config1();
switch (c->cputype) {
switch (cputype) {
case CPU_CAVIUM_OCTEON:
case CPU_CAVIUM_OCTEON_PLUS:
c->icache.linesz = 2 << ((config1 >> 19) & 7);
......@@ -199,7 +201,7 @@ static void probe_octeon(void)
c->icache.sets * c->icache.ways * c->icache.linesz;
c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
c->dcache.linesz = 128;
if (c->cputype == CPU_CAVIUM_OCTEON_PLUS)
if (cputype == CPU_CAVIUM_OCTEON_PLUS)
c->dcache.sets = 2; /* CN5XXX has two Dcache sets */
else
c->dcache.sets = 1; /* CN3XXX has one Dcache set */
......
......@@ -12,6 +12,7 @@
#include <linux/highmem.h>
#include <linux/kernel.h>
#include <linux/linkage.h>
#include <linux/preempt.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/mm.h>
......@@ -24,6 +25,7 @@
#include <asm/cacheops.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
#include <asm/cpu-type.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/pgtable.h>
......@@ -601,6 +603,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
/* Catch bad driver code */
BUG_ON(size == 0);
preempt_disable();
if (cpu_has_inclusive_pcaches) {
if (size >= scache_size)
r4k_blast_scache();
......@@ -621,6 +624,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
R4600_HIT_CACHEOP_WAR_IMPL;
blast_dcache_range(addr, addr + size);
}
preempt_enable();
bc_wback_inv(addr, size);
__sync();
......@@ -631,6 +635,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
/* Catch bad driver code */
BUG_ON(size == 0);
preempt_disable();
if (cpu_has_inclusive_pcaches) {
if (size >= scache_size)
r4k_blast_scache();
......@@ -655,6 +660,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
R4600_HIT_CACHEOP_WAR_IMPL;
blast_inv_dcache_range(addr, addr + size);
}
preempt_enable();
bc_inv(addr, size);
__sync();
......@@ -780,21 +786,31 @@ static inline void rm7k_erratum31(void)
static inline void alias_74k_erratum(struct cpuinfo_mips *c)
{
unsigned int imp = c->processor_id & PRID_IMP_MASK;
unsigned int rev = c->processor_id & PRID_REV_MASK;
/*
* Early versions of the 74K do not update the cache tags on a
* vtag miss/ptag hit which can occur in the case of KSEG0/KUSEG
* aliases. In this case it is better to treat the cache as always
* having aliases.
*/
if ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(2, 4, 0))
switch (imp) {
case PRID_IMP_74K:
if (rev <= PRID_REV_ENCODE_332(2, 4, 0))
c->dcache.flags |= MIPS_CACHE_VTAG;
if ((c->processor_id & 0xff) == PRID_REV_ENCODE_332(2, 4, 0))
if (rev == PRID_REV_ENCODE_332(2, 4, 0))
write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
if (((c->processor_id & 0xff00) == PRID_IMP_1074K) &&
((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(1, 1, 0))) {
break;
case PRID_IMP_1074K:
if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) {
c->dcache.flags |= MIPS_CACHE_VTAG;
write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
}
break;
default:
BUG();
}
}
static char *way_string[] = { NULL, "direct mapped", "2-way",
......@@ -809,7 +825,7 @@ static void probe_pcache(void)
unsigned long config1;
unsigned int lsize;
switch (c->cputype) {
switch (current_cpu_type()) {
case CPU_R4600: /* QED style two way caches? */
case CPU_R4700:
case CPU_R5000:
......@@ -1025,7 +1041,8 @@ static void probe_pcache(void)
* presumably no vendor is shipping his hardware in the "bad"
* configuration.
*/
if ((prid & 0xff00) == PRID_IMP_R4000 && (prid & 0xff) < 0x40 &&
if ((prid & PRID_IMP_MASK) == PRID_IMP_R4000 &&
(prid & PRID_REV_MASK) < PRID_REV_R4400 &&
!(config & CONF_SC) && c->icache.linesz != 16 &&
PAGE_SIZE <= 0x8000)
panic("Improper R4000SC processor configuration detected");
......@@ -1045,7 +1062,7 @@ static void probe_pcache(void)
* normally they'd suffer from aliases but magic in the hardware deals
* with that for us so we don't need to take care ourselves.
*/
switch (c->cputype) {
switch (current_cpu_type()) {
case CPU_20KC:
case CPU_25KF:
case CPU_SB1:
......@@ -1065,7 +1082,7 @@ static void probe_pcache(void)
case CPU_34K:
case CPU_74K:
case CPU_1004K:
if (c->cputype == CPU_74K)
if (current_cpu_type() == CPU_74K)
alias_74k_erratum(c);
if ((read_c0_config7() & (1 << 16))) {
/* effectively physically indexed dcache,
......@@ -1078,7 +1095,7 @@ static void probe_pcache(void)
c->dcache.flags |= MIPS_CACHE_ALIASES;
}
switch (c->cputype) {
switch (current_cpu_type()) {
case CPU_20KC:
/*
* Some older 20Kc chips doesn't have the 'VI' bit in
......@@ -1207,7 +1224,7 @@ static void setup_scache(void)
* processors don't have a S-cache that would be relevant to the
* Linux memory management.
*/
switch (c->cputype) {
switch (current_cpu_type()) {
case CPU_R4000SC:
case CPU_R4000MC:
case CPU_R4400SC:
......@@ -1384,9 +1401,8 @@ static void r4k_cache_error_setup(void)
{
extern char __weak except_vec2_generic;
extern char __weak except_vec2_sb1;
struct cpuinfo_mips *c = &current_cpu_data;
switch (c->cputype) {
switch (current_cpu_type()) {
case CPU_SB1:
case CPU_SB1A:
set_uncached_handler(0x100, &except_vec2_sb1, 0x80);
......
......@@ -18,6 +18,7 @@
#include <linux/highmem.h>
#include <asm/cache.h>
#include <asm/cpu-type.h>
#include <asm/io.h>
#include <dma-coherence.h>
......
......@@ -18,6 +18,7 @@
#include <asm/bugs.h>
#include <asm/cacheops.h>
#include <asm/cpu-type.h>
#include <asm/inst.h>
#include <asm/io.h>
#include <asm/page.h>
......
......@@ -6,6 +6,7 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/cpu-type.h>
#include <asm/mipsregs.h>
#include <asm/bcache.h>
#include <asm/cacheops.h>
......@@ -71,7 +72,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
unsigned int tmp;
/* Check the bypass bit (L2B) */
switch (c->cputype) {
switch (current_cpu_type()) {
case CPU_34K:
case CPU_74K:
case CPU_1004K:
......
......@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <asm/cpu.h>
#include <asm/cpu-type.h>
#include <asm/bootinfo.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
......
......@@ -30,6 +30,7 @@
#include <linux/cache.h>
#include <asm/cacheflush.h>
#include <asm/cpu-type.h>
#include <asm/pgtable.h>
#include <asm/war.h>
#include <asm/uasm.h>
......
......@@ -27,6 +27,7 @@
#include <linux/timex.h>
#include <linux/mc146818rtc.h>
#include <asm/cpu.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/hardirq.h>
......@@ -76,7 +77,7 @@ static void __init estimate_frequencies(void)
#endif
#if defined (CONFIG_KVM_GUEST) && defined (CONFIG_KVM_HOST_FREQ)
unsigned int prid = read_c0_prid() & 0xffff00;
unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
/*
* XXXKYMA: hardwire the CPU frequency to Host Freq/4
......@@ -169,7 +170,7 @@ unsigned int get_c0_compare_int(void)
void __init plat_time_init(void)
{
unsigned int prid = read_c0_prid() & 0xffff00;
unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
unsigned int freq;
estimate_frequencies();
......
......@@ -7,6 +7,7 @@
*/
#include <linux/init.h>
#include <asm/cpu.h>
#include <asm/setup.h>
#include <asm/time.h>
#include <asm/irq.h>
......@@ -34,7 +35,7 @@ static void __iomem *status_reg = (void __iomem *)0xbf000410;
*/
static unsigned int __init estimate_cpu_frequency(void)
{
unsigned int prid = read_c0_prid() & 0xffff00;
unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
unsigned int tick = 0;
unsigned int freq;
unsigned int orig;
......
......@@ -36,6 +36,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/cpu.h>
#include <asm/mipsregs.h>
#include <asm/netlogic/xlr/fmn.h>
#include <asm/netlogic/xlr/xlr.h>
......@@ -187,7 +188,7 @@ void xlr_board_info_setup(void)
int processor_id, num_core;
num_core = hweight32(nlm_current_node()->coremask);
processor_id = read_c0_prid() & 0xff00;
processor_id = read_c0_prid() & PRID_IMP_MASK;
setup_cpu_fmninfo(cpu, num_core);
switch (processor_id) {
......
......@@ -12,6 +12,7 @@
#include <linux/oprofile.h>
#include <linux/smp.h>
#include <asm/cpu-info.h>
#include <asm/cpu-type.h>
#include "op_impl.h"
......
......@@ -39,6 +39,7 @@
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/vt.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/bcm1480_scd.h>
......
......@@ -22,6 +22,7 @@
#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/mipsregs.h>
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
......@@ -119,7 +120,7 @@ void __init bcm1480_setup(void)
uint64_t sys_rev;
int plldiv;
sb1_pass = read_c0_prid() & 0xff;
sb1_pass = read_c0_prid() & PRID_REV_MASK;
sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
soc_type = SYS_SOC_TYPE(sys_rev);
part_type = G_SYS_PART(sys_rev);
......
......@@ -22,6 +22,7 @@
#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/mipsregs.h>
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
......@@ -182,7 +183,7 @@ void __init sb1250_setup(void)
int plldiv;
int bad_config = 0;
sb1_pass = read_c0_prid() & 0xff;
sb1_pass = read_c0_prid() & PRID_REV_MASK;
sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
soc_type = SYS_SOC_TYPE(sys_rev);
soc_pass = G_SYS_REVISION(sys_rev);
......
......@@ -25,6 +25,7 @@
#endif
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/io.h>
#include <asm/reboot.h>
#include <asm/sni.h>
......@@ -173,7 +174,7 @@ void __init plat_mem_setup(void)
system_type = "RM300-Cxx";
break;
case SNI_BRD_PCI_DESKTOP:
switch (read_c0_prid() & 0xff00) {
switch (read_c0_prid() & PRID_IMP_MASK) {
case PRID_IMP_R4600:
case PRID_IMP_R4700:
system_type = "RM200-C20";
......
......@@ -48,13 +48,8 @@ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
while (freed) {
struct sk_buff *skb = dev_alloc_skb(size + 256);
if (unlikely(skb == NULL)) {
pr_warning
("Failed to allocate skb for hardware pool %d\n",
pool);
if (unlikely(skb == NULL))
break;
}
skb_reserve(skb, 256 - (((unsigned long)skb->data) & 0x7f));
*(struct sk_buff **)(skb->data - sizeof(void *)) = skb;
cvmx_fpa_free(skb->data, pool, DONT_WRITEBACK(size / 128));
......
......@@ -373,9 +373,7 @@ int cvm_oct_rgmii_init(struct net_device *dev)
* Enable interrupts on inband status changes
* for this port.
*/
gmx_rx_int_en.u64 =
cvmx_read_csr(CVMX_GMXX_RXX_INT_EN
(index, interface));
gmx_rx_int_en.u64 = 0;
gmx_rx_int_en.s.phy_dupx = 1;
gmx_rx_int_en.s.phy_link = 1;
gmx_rx_int_en.s.phy_spd = 1;
......
......@@ -303,6 +303,7 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
if (backlog > budget * cores_in_use && napi != NULL)
cvm_oct_enable_one_cpu();
}
rx_count++;
skb_in_hw = USE_SKBUFFS_IN_HW && work->word2.s.bufs == 1;
if (likely(skb_in_hw)) {
......@@ -336,9 +337,6 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
*/
skb = dev_alloc_skb(work->len);
if (!skb) {
printk_ratelimited("Port %d failed to allocate "
"skbuff, packet dropped\n",
work->ipprt);
cvm_oct_free_work(work);
continue;
}
......@@ -429,7 +427,6 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
#endif
}
netif_receive_skb(skb);
rx_count++;
} else {
/* Drop any packet received for a device that isn't up */
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment