Commit f137e463 authored by Andrew Isaacson's avatar Andrew Isaacson Committed by Ralf Baechle

Add support for BCM1480 family of chips.

    
 - Kconfig and Makefile changes
 - arch/mips/sibyte/bcm1480/
 - changes to sibyte common code to support 1480
Signed-Off-By: default avatarAndy Isaacson <adi@broadcom.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 93ce2f52
......@@ -1429,7 +1429,7 @@ source "mm/Kconfig"
config SMP
bool "Multi-Processing support"
depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
......
......@@ -650,10 +650,20 @@ load-$(CONFIG_SGI_IP32) += 0xffffffff80004000
# removed (as happens, even if they have __initcall/module_init)
#
core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/
cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte
cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/
cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte
cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/
cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/
cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
#
# Sibyte BCM91120x (Carmel) board
......
......@@ -26,6 +26,16 @@ config SIBYTE_BCM112X
bool
select SIBYTE_SB1xxx_SOC
config SIBYTE_BCM1x80
bool
select HW_HAS_PCI
select SIBYTE_SB1xxx_SOC
config SIBYTE_BCM1x55
bool
select HW_HAS_PCI
select SIBYTE_SB1xxx_SOC
config SIBYTE_SB1xxx_SOC
bool
depends on EXPERIMENTAL
......
obj-y := setup.o irq.o irq_handler.o time.o
obj-$(CONFIG_SMP) += smp.o
EXTRA_AFLAGS := $(CFLAGS)
/*
* Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/kernel_stat.h>
#include <asm/errno.h>
#include <asm/signal.h>
#include <asm/system.h>
#include <asm/ptrace.h>
#include <asm/io.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/bcm1480_int.h>
#include <asm/sibyte/bcm1480_scd.h>
#include <asm/sibyte/sb1250_uart.h>
#include <asm/sibyte/sb1250.h>
/*
* These are the routines that handle all the low level interrupt stuff.
* Actions handled here are: initialization of the interrupt map, requesting of
* interrupt lines by handlers, dispatching if interrupts to handlers, probing
* for interrupt lines
*/
#define shutdown_bcm1480_irq disable_bcm1480_irq
static void end_bcm1480_irq(unsigned int irq);
static void enable_bcm1480_irq(unsigned int irq);
static void disable_bcm1480_irq(unsigned int irq);
static unsigned int startup_bcm1480_irq(unsigned int irq);
static void ack_bcm1480_irq(unsigned int irq);
#ifdef CONFIG_SMP
static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
#endif
#ifdef CONFIG_PCI
extern unsigned long ht_eoi_space;
#endif
#ifdef CONFIG_KGDB
#include <asm/gdb-stub.h>
extern void breakpoint(void);
static int kgdb_irq;
#ifdef CONFIG_GDB_CONSOLE
extern void register_gdb_console(void);
#endif
/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */
static int kgdb_flag = 1;
static int __init nokgdb(char *str)
{
kgdb_flag = 0;
return 1;
}
__setup("nokgdb", nokgdb);
/* Default to UART1 */
int kgdb_port = 1;
#ifdef CONFIG_SIBYTE_SB1250_DUART
extern char sb1250_duart_present[];
#endif
#endif
static struct hw_interrupt_type bcm1480_irq_type = {
.typename = "BCM1480-IMR",
.startup = startup_bcm1480_irq,
.shutdown = shutdown_bcm1480_irq,
.enable = enable_bcm1480_irq,
.disable = disable_bcm1480_irq,
.ack = ack_bcm1480_irq,
.end = end_bcm1480_irq,
#ifdef CONFIG_SMP
.set_affinity = bcm1480_set_affinity
#endif
};
/* Store the CPU id (not the logical number) */
int bcm1480_irq_owner[BCM1480_NR_IRQS];
DEFINE_SPINLOCK(bcm1480_imr_lock);
void bcm1480_mask_irq(int cpu, int irq)
{
unsigned long flags;
u64 cur_ints,hl_spacing;
spin_lock_irqsave(&bcm1480_imr_lock, flags);
hl_spacing = 0;
if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
hl_spacing = BCM1480_IMR_HL_SPACING;
irq -= BCM1480_NR_IRQS_HALF;
}
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
cur_ints |= (((u64) 1) << irq);
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
}
void bcm1480_unmask_irq(int cpu, int irq)
{
unsigned long flags;
u64 cur_ints,hl_spacing;
spin_lock_irqsave(&bcm1480_imr_lock, flags);
hl_spacing = 0;
if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
hl_spacing = BCM1480_IMR_HL_SPACING;
irq -= BCM1480_NR_IRQS_HALF;
}
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
cur_ints &= ~(((u64) 1) << irq);
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
}
#ifdef CONFIG_SMP
static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
{
int i = 0, old_cpu, cpu, int_on;
u64 cur_ints;
irq_desc_t *desc = irq_desc + irq;
unsigned long flags;
unsigned int irq_dirty;
i = first_cpu(mask);
if (next_cpu(i, mask) <= NR_CPUS) {
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
return;
}
/* Convert logical CPU to physical CPU */
cpu = cpu_logical_map(i);
/* Protect against other affinity changers and IMR manipulation */
spin_lock_irqsave(&desc->lock, flags);
spin_lock(&bcm1480_imr_lock);
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = bcm1480_irq_owner[irq];
irq_dirty = irq;
if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
irq_dirty -= BCM1480_NR_IRQS_HALF;
}
int k;
for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
int_on = !(cur_ints & (((u64) 1) << irq_dirty));
if (int_on) {
/* If it was on, mask it */
cur_ints |= (((u64) 1) << irq_dirty);
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
}
bcm1480_irq_owner[irq] = cpu;
if (int_on) {
/* unmask for the new CPU */
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
cur_ints &= ~(((u64) 1) << irq_dirty);
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
}
}
spin_unlock(&bcm1480_imr_lock);
spin_unlock_irqrestore(&desc->lock, flags);
}
#endif
/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */
extern void bcm1480_irq_handler(void);
/*****************************************************************************/
static unsigned int startup_bcm1480_irq(unsigned int irq)
{
bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
return 0; /* never anything pending */
}
static void disable_bcm1480_irq(unsigned int irq)
{
bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
}
static void enable_bcm1480_irq(unsigned int irq)
{
bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
}
static void ack_bcm1480_irq(unsigned int irq)
{
u64 pending;
unsigned int irq_dirty;
/*
* If the interrupt was an HT interrupt, now is the time to
* clear it. NOTE: we assume the HT bridge was set up to
* deliver the interrupts to all CPUs (which makes affinity
* changing easier for us)
*/
irq_dirty = irq;
if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
irq_dirty -= BCM1480_NR_IRQS_HALF;
}
int k;
for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
pending &= ((u64)1 << (irq_dirty));
if (pending) {
#ifdef CONFIG_SMP
int i;
for (i=0; i<NR_CPUS; i++) {
/*
* Clear for all CPUs so an affinity switch
* doesn't find an old status
*/
__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
}
#else
__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
#endif
/*
* Generate EOI. For Pass 1 parts, EOI is a nop. For
* Pass 2, the LDT world may be edge-triggered, but
* this EOI shouldn't hurt. If they are
* level-sensitive, the EOI is required.
*/
#ifdef CONFIG_PCI
if (ht_eoi_space)
*(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
#endif
}
}
bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
}
static void end_bcm1480_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
}
}
void __init init_bcm1480_irqs(void)
{
int i;
for (i = 0; i < NR_IRQS; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = 0;
irq_desc[i].depth = 1;
if (i < BCM1480_NR_IRQS) {
irq_desc[i].handler = &bcm1480_irq_type;
bcm1480_irq_owner[i] = 0;
} else {
irq_desc[i].handler = &no_irq_type;
}
}
}
static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id,
struct pt_regs *regs)
{
return IRQ_NONE;
}
static struct irqaction bcm1480_dummy_action = {
.handler = bcm1480_dummy_handler,
.flags = 0,
.mask = CPU_MASK_NONE,
.name = "bcm1480-private",
.next = NULL,
.dev_id = 0
};
int bcm1480_steal_irq(int irq)
{
irq_desc_t *desc = irq_desc + irq;
unsigned long flags;
int retval = 0;
if (irq >= BCM1480_NR_IRQS)
return -EINVAL;
spin_lock_irqsave(&desc->lock,flags);
/* Don't allow sharing at all for these */
if (desc->action != NULL)
retval = -EBUSY;
else {
desc->action = &bcm1480_dummy_action;
desc->depth = 0;
}
spin_unlock_irqrestore(&desc->lock,flags);
return 0;
}
/*
* init_IRQ is called early in the boot sequence from init/main.c. It
* is responsible for setting up the interrupt mapper and installing the
* handler that will be responsible for dispatching interrupts to the
* "right" place.
*/
/*
* For now, map all interrupts to IP[2]. We could save
* some cycles by parceling out system interrupts to different
* IP lines, but keep it simple for bringup. We'll also direct
* all interrupts to a single CPU; we should probably route
* PCI and LDT to one cpu and everything else to the other
* to balance the load a bit.
*
* On the second cpu, everything is set to IP5, which is
* ignored, EXCEPT the mailbox interrupt. That one is
* set to IP[2] so it is handled. This is needed so we
* can do cross-cpu function calls, as requred by SMP
*/
#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
#define IMR_IP5_VAL K_BCM1480_INT_MAP_I3
#define IMR_IP6_VAL K_BCM1480_INT_MAP_I4
void __init arch_init_irq(void)
{
unsigned int i, cpu;
u64 tmp;
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
STATUSF_IP1 | STATUSF_IP0;
/* Default everything to IP2 */
/* Start with _high registers which has no bit 0 interrupt source */
for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) { /* was I0 */
for (cpu = 0; cpu < 4; cpu++) {
__raw_writeq(IMR_IP2_VAL,
IOADDR(A_BCM1480_IMR_REGISTER(cpu,
R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
}
}
/* Now do _low registers */
for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
for (cpu = 0; cpu < 4; cpu++) {
__raw_writeq(IMR_IP2_VAL,
IOADDR(A_BCM1480_IMR_REGISTER(cpu,
R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
}
}
init_bcm1480_irqs();
/*
* Map the high 16 bits of mailbox_0 registers to IP[3], for
* inter-cpu messages
*/
/* Was I1 */
for (cpu = 0; cpu < 4; cpu++) {
__raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
(K_BCM1480_INT_MBOX_0_0 << 3)));
}
/* Clear the mailboxes. The firmware may leave them dirty */
for (cpu = 0; cpu < 4; cpu++) {
__raw_writeq(0xffffffffffffffffULL,
IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
__raw_writeq(0xffffffffffffffffULL,
IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
}
/* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
for (cpu = 0; cpu < 4; cpu++) {
__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
}
tmp = ~((u64) 0);
for (cpu = 0; cpu < 4; cpu++) {
__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
}
bcm1480_steal_irq(K_BCM1480_INT_MBOX_0_0);
/*
* Note that the timer interrupts are also mapped, but this is
* done in bcm1480_time_init(). Also, the profiling driver
* does its own management of IP7.
*/
#ifdef CONFIG_KGDB
imask |= STATUSF_IP6;
#endif
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
set_except_vector(0, bcm1480_irq_handler);
#ifdef CONFIG_KGDB
if (kgdb_flag) {
kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
#ifdef CONFIG_SIBYTE_SB1250_DUART
sb1250_duart_present[kgdb_port] = 0;
#endif
/* Setup uart 1 settings, mapper */
/* QQQ FIXME */
__raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
bcm1480_steal_irq(kgdb_irq);
__raw_writeq(IMR_IP6_VAL,
IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
(kgdb_irq<<3));
bcm1480_unmask_irq(0, kgdb_irq);
#ifdef CONFIG_GDB_CONSOLE
register_gdb_console();
#endif
prom_printf("Waiting for GDB on UART port %d\n", kgdb_port);
set_debug_traps();
breakpoint();
}
#endif
}
#ifdef CONFIG_KGDB
#include <linux/delay.h>
#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
void bcm1480_kgdb_interrupt(struct pt_regs *regs)
{
/*
* Clear break-change status (allow some time for the remote
* host to stop the break, since we would see another
* interrupt on the end-of-break too)
*/
kstat.irqs[smp_processor_id()][kgdb_irq]++;
mdelay(500);
duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
M_DUART_RX_EN | M_DUART_TX_EN);
set_async_breakpoint(&regs->cp0_epc);
}
#endif /* CONFIG_KGDB */
/*
* Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* bcm1480_irq_handler() is the routine that is actually called when an
* interrupt occurs. It is installed as the exception vector handler in
* init_IRQ() in arch/mips/sibyte/bcm1480/irq.c
*
* In the handle we figure out which interrupts need handling, and use that
* to call the dispatcher, which will take care of actually calling
* registered handlers
*
* Note that we take care of all raised interrupts in one go at the handler.
* This is more BSDish than the Indy code, and also, IMHO, more sane.
*/
#include <linux/config.h>
#include <asm/addrspace.h>
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#include <asm/sibyte/sb1250_defs.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/bcm1480_int.h>
/*
* What a pain. We have to be really careful saving the upper 32 bits of any
* register across function calls if we don't want them trashed--since were
* running in -o32, the calling routing never saves the full 64 bits of a
* register across a function call. Being the interrupt handler, we're
* guaranteed that interrupts are disabled during this code so we don't have
* to worry about random interrupts blasting the high 32 bits.
*/
.text
.set push
.set noreorder
.set noat
.set mips64
#.set mips4
.align 5
NESTED(bcm1480_irq_handler, PT_SIZE, sp)
SAVE_ALL
CLI
#ifdef CONFIG_SIBYTE_BCM1480_PROF
/* Set compare to count to silence count/compare timer interrupts */
mfc0 t1, CP0_COUNT
mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
#endif
/* Read cause */
mfc0 s0, CP0_CAUSE
#ifdef CONFIG_SIBYTE_BCM1480_PROF
/* Cpu performance counter interrupt is routed to IP[7] */
andi t1, s0, CAUSEF_IP7
beqz t1, 0f
srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */
and t1, t1, 0x4 /* mask to get just BD bit */
#ifdef CONFIG_MIPS64
dmfc0 a0, CP0_EPC
daddu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
#else
mfc0 a0, CP0_EPC
addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
#endif
jal sbprof_cpu_intr
nop
j ret_from_irq
nop
0:
#endif
/* Timer interrupt is routed to IP[4] */
andi t1, s0, CAUSEF_IP4
beqz t1, 1f
nop
jal bcm1480_timer_interrupt
move a0, sp /* Pass the registers along */
j ret_from_irq
nop /* delay slot */
1:
#ifdef CONFIG_SMP
/* Mailbox interrupt is routed to IP[3] */
andi t1, s0, CAUSEF_IP3
beqz t1, 2f
nop
jal bcm1480_mailbox_interrupt
move a0, sp
j ret_from_irq
nop /* delay slot */
2:
#endif
#ifdef CONFIG_KGDB
/* KGDB (uart 1) interrupt is routed to IP[6] */
andi t1, s0, CAUSEF_IP6
beqz t1, 3f
nop /* delay slot */
jal bcm1480_kgdb_interrupt
move a0, sp
j ret_from_irq
nop /* delay slot */
3:
#endif
and t1, s0, CAUSEF_IP2
beqz t1, 9f
nop
/*
* Default...we've hit an IP[2] interrupt, which means we've got
* to check the 1480 interrupt registers to figure out what to do
* Need to detect which CPU we're on, now that smp_affinity is
* supported.
*/
PTR_LA v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE
#ifdef CONFIG_SMP
lw t1, TI_CPU($28)
sll t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT
addu v0, v0, t1
#endif
/* Read IP[2] status (get both high and low halves of status) */
ld s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0)
ld s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0)
move s2, zero /* intr number */
li s3, 64
beqz s0, 9f /* No interrupts. Return. */
move a1, sp
xori s4, s0, 1 /* if s0 (_H) == 1, it's a low intr, so... */
movz s2, s3, s4 /* start the intr number at 64, and */
movz s0, s1, s4 /* look at the low status value. */
dclz s1, s0 /* Find the next interrupt. */
dsubu a0, zero, s1
daddiu a0, a0, 63
jal do_IRQ
daddu a0, a0, s2
9: j ret_from_irq
nop
.set pop
END(bcm1480_irq_handler)
/*
* Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/mipsregs.h>
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/bcm1480_scd.h>
#include <asm/sibyte/sb1250_scd.h>
unsigned int sb1_pass;
unsigned int soc_pass;
unsigned int soc_type;
unsigned int periph_rev;
unsigned int zbbus_mhz;
static unsigned int part_type;
static char *soc_str;
static char *pass_str;
static inline int setup_bcm1x80_bcm1x55(void);
/* Setup code likely to be common to all SiByte platforms */
static inline int sys_rev_decode(void)
{
int ret = 0;
switch (soc_type) {
case K_SYS_SOC_TYPE_BCM1x80:
if (part_type == K_SYS_PART_BCM1480)
soc_str = "BCM1480";
else if (part_type == K_SYS_PART_BCM1280)
soc_str = "BCM1280";
else
soc_str = "BCM1x80";
ret = setup_bcm1x80_bcm1x55();
break;
case K_SYS_SOC_TYPE_BCM1x55:
if (part_type == K_SYS_PART_BCM1455)
soc_str = "BCM1455";
else if (part_type == K_SYS_PART_BCM1255)
soc_str = "BCM1255";
else
soc_str = "BCM1x55";
ret = setup_bcm1x80_bcm1x55();
break;
default:
prom_printf("Unknown part type %x\n", part_type);
ret = 1;
break;
}
return ret;
}
static inline int setup_bcm1x80_bcm1x55(void)
{
int ret = 0;
switch (soc_pass) {
case K_SYS_REVISION_BCM1480_S0:
periph_rev = 1;
pass_str = "S0 (pass1)";
break;
case K_SYS_REVISION_BCM1480_A1:
periph_rev = 1;
pass_str = "A1 (pass1)";
break;
case K_SYS_REVISION_BCM1480_A2:
periph_rev = 1;
pass_str = "A2 (pass1)";
break;
case K_SYS_REVISION_BCM1480_A3:
periph_rev = 1;
pass_str = "A3 (pass1)";
break;
case K_SYS_REVISION_BCM1480_B0:
periph_rev = 1;
pass_str = "B0 (pass2)";
break;
default:
prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
periph_rev = 1;
pass_str = "Unknown Revision";
break;
}
return ret;
}
void bcm1480_setup(void)
{
uint64_t sys_rev;
int plldiv;
sb1_pass = read_c0_prid() & 0xff;
sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
soc_type = SYS_SOC_TYPE(sys_rev);
part_type = G_SYS_PART(sys_rev);
soc_pass = G_SYS_REVISION(sys_rev);
if (sys_rev_decode()) {
prom_printf("Restart after failure to identify SiByte chip\n");
machine_restart(NULL);
}
plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
prom_printf("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n",
soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
prom_printf("Board type: %s\n", get_system_type());
}
/*
* Copyright (C) 2001,2002,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/kernel_stat.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/bcm1480_int.h>
extern void smp_call_function_interrupt(void);
/*
* These are routines for dealing with the bcm1480 smp capabilities
* independent of board/firmware
*/
static void *mailbox_0_set_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
};
static void *mailbox_0_clear_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
};
static void *mailbox_0_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
};
/*
* SMP init and finish on secondary CPUs
*/
void bcm1480_smp_init(void)
{
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
STATUSF_IP1 | STATUSF_IP0;
/* Set interrupt mask, but don't enable */
change_c0_status(ST0_IM, imask);
}
void bcm1480_smp_finish(void)
{
extern void bcm1480_time_init(void);
bcm1480_time_init();
local_irq_enable();
}
/*
* These are routines for dealing with the sb1250 smp capabilities
* independent of board/firmware
*/
/*
* Simple enough; everything is set up, so just poke the appropriate mailbox
* register, and we should be set
*/
void core_send_ipi(int cpu, unsigned int action)
{
__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
}
void bcm1480_mailbox_interrupt(struct pt_regs *regs)
{
int cpu = smp_processor_id();
unsigned int action;
kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++;
/* Load the mailbox register to figure out what we're supposed to do */
action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
/* Clear the mailbox to clear the interrupt */
__raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
/*
* Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
* interrupt will do the reschedule for us
*/
if (action & SMP_CALL_FUNCTION)
smp_call_function_interrupt();
}
/*
* Copyright (C) 2000,2001,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* These are routines to set up and handle interrupts from the
* bcm1480 general purpose timer 0. We're using the timer as a
* system clock, so we set it up to run at 100 Hz. On every
* interrupt, we update our idea of what the time of day is,
* then call do_timer() in the architecture-independent kernel
* code to do general bookkeeping (e.g. update jiffies, run
* bottom halves, etc.)
*/
#include <linux/config.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/kernel_stat.h>
#include <asm/irq.h>
#include <asm/ptrace.h>
#include <asm/addrspace.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/bcm1480_int.h>
#include <asm/sibyte/bcm1480_scd.h>
#include <asm/sibyte/sb1250.h>
#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
extern int bcm1480_steal_irq(int irq);
void bcm1480_time_init(void)
{
int cpu = smp_processor_id();
int irq = K_BCM1480_INT_TIMER_0+cpu;
/* Only have 4 general purpose timers */
if (cpu > 3) {
BUG();
}
if (!cpu) {
/* Use our own gettimeoffset() routine */
do_gettimeoffset = bcm1480_gettimeoffset;
}
bcm1480_mask_irq(cpu, irq);
/* Map the timer interrupt to ip[4] of this cpu */
__raw_writeq(IMR_IP4_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H)
+ (irq<<3)));
/* the general purpose timer ticks at 1 Mhz independent of the rest of the system */
/* Disable the timer and set up the count */
__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
__raw_writeq(
#ifndef CONFIG_SIMULATION
1000000/HZ
#else
50000/HZ
#endif
, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
/* Set the timer running */
__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
bcm1480_unmask_irq(cpu, irq);
bcm1480_steal_irq(irq);
/*
* This interrupt is "special" in that it doesn't use the request_irq
* way to hook the irq line. The timer interrupt is initialized early
* enough to make this a major pain, and it's also firing enough to
* warrant a bit of special case code. bcm1480_timer_interrupt is
* called directly from irq_handler.S when IP[4] is set during an
* interrupt
*/
}
#include <asm/sibyte/sb1250.h>
void bcm1480_timer_interrupt(struct pt_regs *regs)
{
int cpu = smp_processor_id();
int irq = K_BCM1480_INT_TIMER_0+cpu;
/* Reset the timer */
__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
/*
* CPU 0 handles the global timer interrupt job
*/
if (cpu == 0) {
ll_timer_interrupt(irq, regs);
}
/*
* every CPU should do profiling and process accouting
*/
ll_local_timer_interrupt(irq, regs);
}
/*
* We use our own do_gettimeoffset() instead of the generic one,
* because the generic one does not work for SMP case.
* In addition, since we use general timer 0 for system time,
* we can get accurate intra-jiffy offset without calibration.
*/
unsigned long bcm1480_gettimeoffset(void)
{
unsigned long count =
__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
return 1000000/HZ - count;
}
......@@ -70,8 +70,15 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
*/
void prom_init_secondary(void)
{
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
extern void bcm1480_smp_init(void);
bcm1480_smp_init();
#elif defined(CONFIG_SIBYTE_SB1250)
extern void sb1250_smp_init(void);
sb1250_smp_init();
#else
#error invalid SMP configuration
#endif
}
/*
......@@ -80,8 +87,15 @@ void prom_init_secondary(void)
*/
void prom_smp_finish(void)
{
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
extern void bcm1480_smp_finish(void);
bcm1480_smp_finish();
#elif defined(CONFIG_SIBYTE_SB1250)
extern void sb1250_smp_finish(void);
sb1250_smp_finish();
#else
#error invalid SMP configuration
#endif
}
/*
......
/*
* Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
* Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or
......@@ -39,11 +39,23 @@
#include <asm/time.h>
#include <asm/traps.h>
#include <asm/sibyte/sb1250.h>
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
#include <asm/sibyte/bcm1480_regs.h>
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
#else
#error invalid SiByte board configuation
#endif
#include <asm/sibyte/sb1250_genbus.h>
#include <asm/sibyte/board.h>
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
extern void bcm1480_setup(void);
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
extern void sb1250_setup(void);
#else
#error invalid SiByte board configuation
#endif
extern int xicor_probe(void);
extern int xicor_set_time(unsigned long);
......@@ -66,7 +78,13 @@ void __init swarm_timer_setup(struct irqaction *irq)
*/
/* We only need to setup the generic timer */
sb1250_time_init();
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
bcm1480_time_init();
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
sb1250_time_init();
#else
#error invalid SiByte board configuation
#endif
}
int swarm_be_handler(struct pt_regs *regs, int is_fixup)
......@@ -81,7 +99,13 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup)
void __init plat_setup(void)
{
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
bcm1480_setup();
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
sb1250_setup();
#else
#error invalid SiByte board configuation
#endif
panic_timeout = 5; /* For debug. */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment