[PATCH] MIPS merge, generic mips64 bits.

This updates the generic mips64 code.

arch/mips64/boot/Makefile

@@ -15,16 +15,30 @@ else
   E2EFLAGS =
 endif
 
+#
+# Drop some uninteresting sections in the kernel.
+# This is only relevant for ELF kernels but doesn't hurt a.out
+#
+drop-sections	= .reginfo .mdebug .comment .note
+strip-flags	= $(addprefix --remove-section=,$(drop-sections))
+
 all: vmlinux.ecoff addinitrd
 
+vmlinux.rm200: vmlinux
+	$(OBJCOPY) \
+		--change-addresses=0xfffffffc \
+		-O elf32-littlemips \
+		$(strip-flags) \
+		$< $@
+
 vmlinux.ecoff:	elf2ecoff $(TOPDIR)/vmlinux
 	./elf2ecoff $(TOPDIR)/vmlinux vmlinux.ecoff $(E2EFLAGS)
 
-elf2ecoff: elf2ecoff.c
-	$(HOSTCC) -o $@ $^
+elf2ecoff: $(TOPDIR)/arch/mips/boot/elf2ecoff.c
+	$(HOSTCC) -I$(TOPDIR)/arch/mips/boot -I- -o $@ $^
 
-addinitrd: addinitrd.c
-	$(HOSTCC) -o $@ $^
+addinitrd: $(TOPDIR)/arch/mips/boot/addinitrd.c
+	$(HOSTCC) -I$(TOPDIR)/arch/mips/boot -I- -o $@ $^
 
 clean:
 	rm -f vmlinux.ecoff

arch/mips64/kernel/Makefile

@@ -4,16 +4,27 @@
 
 extra-y		:= head.o init_task.o
 
-obj-y	:= branch.o entry.o proc.o process.o ptrace.o r4k_cache.o r4k_fpu.o \
-	   r4k_genex.o r4k_switch.o r4k_tlb.o r4k_tlb_debug.o r4k_tlb_glue.o \
-	   scall_64.o semaphore.o setup.o signal.o softfp.o syscall.o \
-	   traps.o unaligned.o
+obj-y		:= branch.o cpu-probe.o entry.o irq.o proc.o process.o \
+		   ptrace.o r4k_cache.o r4k_fpu.o r4k_genex.o r4k_switch.o \
+		   reset.o scall_64.o semaphore.o setup.o signal.o syscall.o \
+		   time.o traps.o unaligned.o
+
+obj-$(CONFIG_I8259)		+= i8259.o
+obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 
 obj-$(CONFIG_MODULES)		+= mips64_ksyms.o
-obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o scall_o32.o signal32.o ioctl32.o
-obj-$(CONFIG_BINFMT_ELF32)	+= binfmt_elf32.o
+obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o signal32.o ioctl32.o
+obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall_n32.o
+obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall_o32.o
 obj-$(CONFIG_SMP)		+= smp.o
 
-AFLAGS_r4k_genex.o := -P
-AFLAGS_r4k_tlb_glue.o := -P
+ifndef CONFIG_MAPPED_PCI_IO
+obj-y				+= pci-dma.o
+endif
+
+obj-$(CONFIG_MODULES)		+= module.o
+
+CFLAGS_cpu-probe.o	= $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+AFLAGS_r4k_genex.o	= -P
+
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips64/kernel/binfmt_elf32.c → arch/mips64/kernel/binfmt_elfn32.c

 /*
- * Support for 32-bit Linux/MIPS ELF binaries.
+ * Support for n32 Linux/MIPS ELF binaries.
  *
  * Copyright (C) 1999, 2001 Ralf Baechle
  * Copyright (C) 1999, 2001 Silicon Graphics, Inc.
@@ -21,16 +21,32 @@
 #define ELF_NGREG	45
 #define ELF_NFPREG	33
 
-typedef unsigned int elf_greg_t;
+typedef unsigned long elf_greg_t;
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 typedef double elf_fpreg_t;
 typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 
-#define elf_check_arch(x)	\
-	((x)->e_machine == EM_MIPS)
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
+		__res = 0;						\
+	if (((__h->e_flags & EF_MIPS_ABI2) == 0) ||			\
+	    ((__h->e_flags & EF_MIPS_ABI) != 0))			\
+		__res = 0;						\
+									\
+	__res;								\
+})
 
-#define TASK32_SIZE		0x80000000UL
+#define TASK32_SIZE		0x7fff8000UL
 #undef ELF_ET_DYN_BASE
 #define ELF_ET_DYN_BASE         (TASK32_SIZE / 3 * 2)
 
@@ -38,11 +54,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 #include <linux/module.h>
 #include <linux/config.h>
 #include <linux/elfcore.h>
-
-struct timeval32
-{
-	unsigned int tv_sec, tv_usec;
-};
+#include <linux/compat.h>
 
 #define elf_prstatus elf_prstatus32
 struct elf_prstatus32
@@ -55,10 +67,10 @@ struct elf_prstatus32
 	pid_t	pr_ppid;
 	pid_t	pr_pgrp;
 	pid_t	pr_sid;
-	struct timeval32 pr_utime;	/* User time */
-	struct timeval32 pr_stime;	/* System time */
-	struct timeval32 pr_cutime;	/* Cumulative user time */
-	struct timeval32 pr_cstime;	/* Cumulative system time */
+	struct compat_timeval pr_utime;	/* User time */
+	struct compat_timeval pr_stime;	/* System time */
+	struct compat_timeval pr_cutime;/* Cumulative user time */
+	struct compat_timeval pr_cstime;/* Cumulative system time */
 	elf_gregset_t pr_reg;	/* GP registers */
 	int pr_fpvalid;		/* True if math co-processor being used.  */
 };
@@ -71,8 +83,8 @@ struct elf_prpsinfo32
 	char	pr_zomb;	/* zombie */
 	char	pr_nice;	/* nice val */
 	unsigned int pr_flag;	/* flags */
-	u16	pr_uid;
-	u16	pr_gid;
+	__kernel_uid_t	pr_uid;
+	__kernel_gid_t	pr_gid;
 	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
 	/* Lots missing */
 	char	pr_fname[16];	/* filename of executable */
@@ -80,7 +92,11 @@ struct elf_prpsinfo32
 };
 
 #define elf_addr_t	u32
-#define init_elf_binfmt init_elf32_binfmt
+#define elf_caddr_t	u32
+#define init_elf_binfmt init_elfn32_binfmt
+
+#define ELF_CORE_EFLAGS EF_MIPS_ABI2
+
 #undef CONFIG_BINFMT_ELF
 #ifdef CONFIG_BINFMT_ELF32
 #define CONFIG_BINFMT_ELF CONFIG_BINFMT_ELF32
@@ -90,8 +106,8 @@ struct elf_prpsinfo32
 #define CONFIG_BINFMT_ELF_MODULE CONFIG_BINFMT_ELF32_MODULE
 #endif
 
-MODULE_DESCRIPTION("Binary format loader for compatibility with 32bit Linux/MIPS binaries");
-MODULE_AUTHOR("Ralf Baechle (ralf@oss.sgi.com)");
+MODULE_DESCRIPTION("Binary format loader for compatibility with n32 Linux/MIPS binaries");
+MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
 
 #undef MODULE_DESCRIPTION
 #undef MODULE_AUTHOR

arch/mips64/kernel/binfmt_elfo32.c

+/*
+ * Support for o32 Linux/MIPS ELF binaries.
+ *
+ * Copyright (C) 1999, 2001 Ralf Baechle
+ * Copyright (C) 1999, 2001 Silicon Graphics, Inc.
+ *
+ * Heavily inspired by the 32-bit Sparc compat code which is
+ * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek   (jj@ultra.linux.cz)
+ */
+
+#define ELF_ARCH		EM_MIPS
+#define ELF_CLASS		ELFCLASS32
+#ifdef __MIPSEB__
+#define ELF_DATA		ELFDATA2MSB;
+#else /* __MIPSEL__ */
+#define ELF_DATA		ELFDATA2LSB;
+#endif
+
+/* ELF register definitions */
+#define ELF_NGREG	45
+#define ELF_NFPREG	33
+
+typedef unsigned int elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr)						\
+({									\
+	int __res = 1;							\
+	struct elfhdr *__h = (hdr);					\
+									\
+	if (__h->e_machine != EM_MIPS)					\
+		__res = 0;						\
+	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
+		__res = 0;						\
+	if ((__h->e_flags & EF_MIPS_ABI2) != 0)				\
+		__res = 0;						\
+	if (((__h->e_flags & EF_MIPS_ABI) != 0) &&			\
+	    ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32))		\
+		__res = 0;						\
+									\
+	__res;								\
+})
+
+#define TASK32_SIZE		0x7fff8000UL
+#undef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE         (TASK32_SIZE / 3 * 2)
+
+#include <asm/processor.h>
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/elfcore.h>
+#include <linux/compat.h>
+
+#define elf_prstatus elf_prstatus32
+struct elf_prstatus32
+{
+	struct elf_siginfo pr_info;	/* Info associated with signal */
+	short	pr_cursig;		/* Current signal */
+	unsigned int pr_sigpend;	/* Set of pending signals */
+	unsigned int pr_sighold;	/* Set of held signals */
+	pid_t	pr_pid;
+	pid_t	pr_ppid;
+	pid_t	pr_pgrp;
+	pid_t	pr_sid;
+	struct compat_timeval pr_utime;	/* User time */
+	struct compat_timeval pr_stime;	/* System time */
+	struct compat_timeval pr_cutime;/* Cumulative user time */
+	struct compat_timeval pr_cstime;/* Cumulative system time */
+	elf_gregset_t pr_reg;	/* GP registers */
+	int pr_fpvalid;		/* True if math co-processor being used.  */
+};
+
+#define elf_prpsinfo elf_prpsinfo32
+struct elf_prpsinfo32
+{
+	char	pr_state;	/* numeric process state */
+	char	pr_sname;	/* char for pr_state */
+	char	pr_zomb;	/* zombie */
+	char	pr_nice;	/* nice val */
+	unsigned int pr_flag;	/* flags */
+	__kernel_uid_t	pr_uid;
+	__kernel_gid_t	pr_gid;
+	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
+	/* Lots missing */
+	char	pr_fname[16];	/* filename of executable */
+	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
+};
+
+#define elf_addr_t	u32
+#define elf_caddr_t	u32
+#define init_elf_binfmt init_elf32_binfmt
+
+
+#undef ELF_CORE_COPY_REGS
+#define ELF_CORE_COPY_REGS(_dest,_regs) elf32_core_copy_regs(_dest,_regs);
+
+void elf32_core_copy_regs(elf_gregset_t _dest, struct pt_regs *_regs)
+{
+	int i;
+
+	memset(_dest, 0, sizeof(elf_gregset_t));
+
+	/* XXXKW the 6 is from EF_REG0 in gdb/gdb/mips-linux-tdep.c, include/asm-mips/reg.h */
+	for (i=6; i<38; i++)
+		_dest[i] = (elf_greg_t) _regs->regs[i-6];
+	_dest[i++] = (elf_greg_t) _regs->lo;
+	_dest[i++] = (elf_greg_t) _regs->hi;
+	_dest[i++] = (elf_greg_t) _regs->cp0_epc;
+	_dest[i++] = (elf_greg_t) _regs->cp0_badvaddr;
+	_dest[i++] = (elf_greg_t) _regs->cp0_status;
+	_dest[i++] = (elf_greg_t) _regs->cp0_cause;
+}
+
+#undef CONFIG_BINFMT_ELF
+#ifdef CONFIG_BINFMT_ELF32
+#define CONFIG_BINFMT_ELF CONFIG_BINFMT_ELF32
+#endif
+#undef CONFIG_BINFMT_ELF_MODULE
+#ifdef CONFIG_BINFMT_ELF32_MODULE
+#define CONFIG_BINFMT_ELF_MODULE CONFIG_BINFMT_ELF32_MODULE
+#endif
+
+MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries");
+MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)");
+
+#undef MODULE_DESCRIPTION
+#undef MODULE_AUTHOR
+
+#include "../../../fs/binfmt_elf.c"

arch/mips64/kernel/branch.c

@@ -11,6 +11,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <asm/branch.h>
+#include <asm/cpu.h>
 #include <asm/inst.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
@@ -163,7 +164,10 @@ int __compute_return_epc(struct pt_regs *regs)
 	 * And now the FPA/cp1 branch instructions.
 	 */
 	case cop1_op:
-		asm ("cfc1\t%0,$31":"=r" (fcr31));
+		if (!cpu_has_fpu)
+			fcr31 = current->thread.fpu.soft.sr;
+		else
+			asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
 		bit = (insn.i_format.rt >> 2);
 		bit += (bit != 0);
 		bit += 23;

arch/mips64/kernel/entry.S

@@ -9,67 +9,88 @@
  * Copyright (C) 1999, 2000 Silicon Graphics
  * Copyright (C) 2001 MIPS Technologies, Inc.
  */
-#include <linux/config.h>
-
 #include <asm/asm.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
-
-/* This duplicates the definition from <linux/sched.h> */
-#error #define PT_TRACESYS	0x00000002		/* tracing system calls */
+#include <asm/thread_info.h>
 
 #define KU_USER 0x10
 
 		.text
-		.align 4
-FEXPORT(ret_from_fork)
-		move	a0, v0			# prev
-		jal	schedule_tail
-#error		lw	t0, TASK_PTRACE($28)	# syscall tracing enabled?
-#error		andi	t0, PT_TRACESYS
-		bnez	t0, tracesys_exit
-		j	ret_from_sys_call
+		.align	5
+FEXPORT(ret_from_irq)
+FEXPORT(ret_from_exception)
+		ld	t0, PT_STATUS(sp)	# returning to kernel mode?
+		andi	t0, t0, KU_USER
+		beqz	t0, restore_all
 
-tracesys_exit:
-		jal	syscall_trace
-		b	ret_from_sys_call
+FEXPORT(resume_userspace)
+		mfc0	t0, CP0_STATUS		# make sure need_resched and
+		ori	t0, t0, 1		# signals dont change between
+		xori	t0, t0, 1		# sampling and return
+		SSNOP; SSNOP; SSNOP
 
-EXPORT(ret_from_irq)
-EXPORT(ret_from_exception)
-		lw	t0, PT_STATUS(sp)	# returning to kernel mode?
-		andi	t0, t0, KU_USER
-		bnez	t0, ret_from_sys_call
+		LONG_L	a2, TI_FLAGS($28)
+		andi	a2, _TIF_WORK_MASK	# current->work (ignoring
+						# syscall_trace
+		bnez	a2, work_pending
 		j	restore_all
 
-reschedule:	jal	schedule 
+FEXPORT(ret_from_fork)
+		jal	schedule_tail
 
-FEXPORT(ret_from_sys_call)
-		mfc0	t0, CP0_STATUS	# need_resched and signals atomic test
-		ori	t0, t0, 1
-		xori	t0, t0, 1
+FEXPORT(syscall_exit)
+		mfc0	t0, CP0_STATUS		# make sure need_resched and
+		ori	t0, t0, 1		# signals dont change between
+		xori	t0, t0, 1		# sampling and return
 		mtc0	t0, CP0_STATUS
+		SSNOP; SSNOP; SSNOP
 
-#error		ld	v0, TASK_NEED_RESCHED($28)
-#error		lw	v1, TASK_SIGPENDING($28)
-		bnez	v0, reschedule
-		bnez	v1, signal_return
+		LONG_L	a2, TI_FLAGS($28)	# current->work
+		bnez	a2, syscall_exit_work
 
-restore_all:	.set	noat
+restore_all:
+		.set	noat
 		RESTORE_ALL
 		eret
 		.set	at
 
-signal_return:	.type	signal_return, @function
+work_pending:
+		bltz	a2, work_notifysig	# current->work.need_resched
+						# test high 8 bits
+work_resched:
+		jal	schedule
 
-		mfc0	t0, CP0_STATUS
-		ori	t0, t0, 1
+		mfc0	t0, CP0_STATUS		# make sure need_resched and
+		ori	t0, t0, 1		# signals dont change between
+		xori	t0, t0, 1		# sampling and return
 		mtc0	t0, CP0_STATUS
+		SSNOP; SSNOP; SSNOP
+
+		LONG_L	a2, TI_FLAGS($28)	# This also converts into
+						# a union of four chars
+		andi	a2, _TIF_WORK_MASK	# is there any work to be done
+						# other than syscall tracing?
+		beqz	a2, restore_all
+		andi	t0, a2, _TIF_NEED_RESCHED
+		bnez	t0, work_notifysig
 
-		move	a0, zero
-		move	a1, sp
-		jal	do_signal
-		b	restore_all
+work_notifysig:					# deal with pending signals and
+						# notify-resume requests
+		move	a0, sp
+		li	a1, 0
+		jal	do_notify_resume	# a2 already loaded
+		j	restore_all
+
+FEXPORT(syscall_exit_work)
+		LONG_L	t0, TI_FLAGS($28)	# current->work.syscall_trace
+		bgez	t0, work_pending
+		mfc0	t0, CP0_STATUS		# sti
+		ori	t0, t0, 1
+		mtc0	t0, CP0_STATUS
+		jal	do_syscall_trace
+		b	resume_userspace
 
 /*
  * Common spurious interrupt handler.
@@ -81,9 +102,10 @@ LEAF(spurious_interrupt)
 		 * Someone tried to fool us by sending an interrupt but we
 		 * couldn't find a cause for it.
 		 */
-		lui     t1,%hi(spurious_count)
-		lw      t0,%lo(spurious_count)(t1)
-		addiu   t0,1
-		sw      t0,%lo(spurious_count)(t1)
+		lui     t1, %hi(irq_err_count)
+1:		ll      t0, %lo(irq_err_count)(t1)
+		addiu   t0, 1
+		sc      t0, %lo(irq_err_count)(t1)
+		beqz	t0, 1b
 		j	ret_from_irq
 		END(spurious_interrupt)

arch/mips64/kernel/head.S

@@ -10,7 +10,6 @@
  * Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999 Ralf Baechle
  * Copyright (C) 1999 Silicon Graphics, Inc.
  */
-#define __ASSEMBLY__
 #include <linux/config.h>
 #include <linux/init.h>
 #include <asm/asm.h>
@@ -27,7 +26,7 @@
 #if defined(CONFIG_ARC64) || defined(CONFIG_MAPPED_KERNEL)
 	/* We get launched at a XKPHYS address but the kernel is linked to
 	   run at a KSEG0 address, so jump there.  */
-	la	t0, \@f
+	PTR_LA	t0, \@f
 	jr	t0
 \@:
 #endif
@@ -35,13 +34,13 @@
 
 #ifdef CONFIG_SGI_IP27
 	/*
-	 * outputs the local nasid into t1.
+	 * outputs the local nasid into res.  IP27 stuff.
 	 */
-	.macro GET_NASID_ASM
-	dli	t1, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
-	ld	t1, (t1)
-	and	t1, NSRI_NODEID_MASK
-	dsrl	t1, NSRI_NODEID_SHFT
+	.macro GET_NASID_ASM res
+	dli	\res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
+	ld	\res, (\res)
+	and	\res, NSRI_NODEID_MASK
+	dsrl	\res, NSRI_NODEID_SHFT
 	.endm
 #endif /* CONFIG_SGI_IP27 */
 
@@ -97,7 +96,7 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	xori	sp, 0xf
 
 #ifdef CONFIG_SGI_IP27
-	GET_NASID_ASM
+	GET_NASID_ASM	t1
 	move	t2, t1				# text and data are here
 	MAPPED_KERNEL_SETUP_TLB
 #endif /* IP27 */
@@ -106,39 +105,39 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 
 	CLI					# disable interrupts
 
-	mfc0	t0, CP0_STATUS
+	PTR_LA	$28, init_thread_union		# init current pointer
+	daddiu	sp, $28, KERNEL_STACK_SIZE-32
+	set_saved_sp	sp, t0, t1
+
 	/*
-	 * On IP27, I am seeing the TS bit set when the
-	 * kernel is loaded. Maybe because the kernel is
-	 * in ckseg0 and not xkphys? Clear it anyway ...
+	 * The firmware/bootloader passes argc/argp/envp
+	 * to us as arguments.  But clear bss first because
+	 * the romvec and other important info is stored there
+	 * by prom_init().
 	 */
-	li	t1, ~(ST0_TS|ST0_CU1|ST0_CU2|ST0_CU3)
-	and	t0, t1
-	or	t0, (ST0_CU0|ST0_KX|ST0_SX|ST0_FR) # Bogosity: cu0 indicates kernel
-	mtc0	t0, CP0_STATUS			   # thread in copy_thread.
-
-	la	$28, init_task_union		# init current pointer
-	daddiu	t0, $28, KERNEL_STACK_SIZE-32
-	sd	t0, kernelsp
-	dsubu	sp, t0, 4*SZREG			# init stack pointer
-	move	t0, $28
-#ifdef CONFIG_SMP
-	mtc0	t0, CP0_WATCHLO
-	dsrl32	t0, t0, 0
-	mtc0	t0, CP0_WATCHHI
-#endif
-	/* Note that all firmware passed argument registers still
-	   have their values.  */
-	jal	prom_init			# initialize firmware
+	PTR_LA	t0, __bss_start
+	sd	zero, (t0)
+	PTR_LA	t1, __bss_stop - 8
+1:
+	daddiu	t0, 8
+	sd	zero, (t0)
+	bne	t0, t1, 1b
 
-	jal	start_kernel
-1:	b	1b				# just in case ...
+	dsubu	sp, 4*SZREG			# init stack pointer
+
+	j	init_arch
 	END(kernel_entry)
 
+#ifdef CONFIG_SMP
+/*
+ * SMP slave cpus entry point.  Board specific code for bootstrap calls this
+ * function after setting up the stack and gp registers.
+ */
+NESTED(smp_bootstrap, 16, sp)
 #ifdef CONFIG_SGI_IP27
-NESTED(bootstrap, 16, sp)
-	GET_NASID_ASM
-	li	t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + KLDIR_OFF_POINTER + K0BASE
+	GET_NASID_ASM	t1
+	li	t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
+		    KLDIR_OFF_POINTER + K0BASE
 	dsll	t1, NASID_SHFT
 	or	t0, t0, t1
 	ld	t0, 0(t0)			# t0 points to kern_vars struct
@@ -146,19 +145,27 @@ NESTED(bootstrap, 16, sp)
 	lh	t2, KV_RW_NASID_OFFSET(t0)
 	MAPPED_KERNEL_SETUP_TLB
 	ARC64_TWIDDLE_PC
+#endif /* CONFIG_SGI_IP27 */
+
 	CLI
+
+	/*
+	 * For the moment set ST0_KU so the CPU will not spit fire when
+	 * executing 64-bit instructions.  The full initialization of the
+	 * CPU's status register is done later in per_cpu_trap_init().
+	 */
         mfc0	t0, CP0_STATUS
-	li	t1, ~(ST0_CU1|ST0_CU2|ST0_CU3)
-	and	t0, t1
-	or	t0, (ST0_CU0|ST0_KX|ST0_SX|ST0_FR) # Bogosity: cu0 indicates kernel
-	mtc0	t0, CP0_STATUS			   # thread in copy_thread.
-	jal	cboot
-	END(bootstrap)
-#endif /* CONFIG_SGI_IP27 */
+        or	t0, ST0_KX
+	mtc0	t0, CP0_STATUS
+
+	jal	start_secondary
+
+	END(smp_bootstrap)
+#endif /* CONFIG_SMP */
 
 	__FINIT
 
-	.comm	kernelsp, 8, 8			# current stackpointer
+	declare_saved_sp
 
 #undef PAGE_SIZE
 #define PAGE_SIZE	0x1000
@@ -171,12 +178,12 @@ NESTED(bootstrap, 16, sp)
 	.endm
 
 	.data
-	.align	12
+	.align	PAGE_SHIFT
 
 	page	swapper_pg_dir, 1
 	page	invalid_pte_table, 0
 	page	invalid_pmd_table, 1
-	page	kptbl, KPTBL_PAGE_ORDER
+	page	kptbl, _PGD_ORDER
 	.globl	ekptbl
 	page	kpmdtbl, 0
 ekptbl:

arch/mips64/kernel/i8259.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Code to handle x86 style IRQs plus some generic interrupt stuff.
+ *
+ * Copyright (C) 1992 Linus Torvalds
+ * Copyright (C) 1994 - 2000 Ralf Baechle
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/sysdev.h>
+
+#include <asm/i8259.h>
+#include <asm/io.h>
+
+void enable_8259A_irq(unsigned int irq);
+void disable_8259A_irq(unsigned int irq);
+
+/*
+ * This is the 'legacy' 8259A Programmable Interrupt Controller,
+ * present in the majority of PC/AT boxes.
+ * plus some generic x86 specific things if generic specifics makes
+ * any sense at all.
+ * this file should become arch/i386/kernel/irq.c when the old irq.c
+ * moves to arch independent land
+ */
+
+static spinlock_t i8259A_lock = SPIN_LOCK_UNLOCKED;
+
+static void end_8259A_irq (unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) &&
+	    irq_desc[irq].action)
+		enable_8259A_irq(irq);
+}
+
+#define shutdown_8259A_irq	disable_8259A_irq
+
+void mask_and_ack_8259A(unsigned int);
+
+static unsigned int startup_8259A_irq(unsigned int irq)
+{
+	enable_8259A_irq(irq);
+
+	return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type i8259A_irq_type = {
+	"XT-PIC",
+	startup_8259A_irq,
+	shutdown_8259A_irq,
+	enable_8259A_irq,
+	disable_8259A_irq,
+	mask_and_ack_8259A,
+	end_8259A_irq,
+	NULL
+};
+
+/*
+ * 8259A PIC functions to handle ISA devices:
+ */
+
+/*
+ * This contains the irq mask for both 8259A irq controllers,
+ */
+static unsigned int cached_irq_mask = 0xffff;
+
+#define cached_21	(cached_irq_mask)
+#define cached_A1	(cached_irq_mask >> 8)
+
+void disable_8259A_irq(unsigned int irq)
+{
+	unsigned int mask = 1 << irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	cached_irq_mask |= mask;
+	if (irq & 8)
+		outb(cached_A1,0xA1);
+	else
+		outb(cached_21,0x21);
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+void enable_8259A_irq(unsigned int irq)
+{
+	unsigned int mask = ~(1 << irq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	cached_irq_mask &= mask;
+	if (irq & 8)
+		outb(cached_A1,0xA1);
+	else
+		outb(cached_21,0x21);
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+int i8259A_irq_pending(unsigned int irq)
+{
+	unsigned int mask = 1 << irq;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	if (irq < 8)
+		ret = inb(0x20) & mask;
+	else
+		ret = inb(0xA0) & (mask >> 8);
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	return ret;
+}
+
+void make_8259A_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &i8259A_irq_type;
+	enable_irq(irq);
+}
+
+/*
+ * This function assumes to be called rarely. Switching between
+ * 8259A registers is slow.
+ * This has to be protected by the irq controller spinlock
+ * before being called.
+ */
+static inline int i8259A_irq_real(unsigned int irq)
+{
+	int value;
+	int irqmask = 1 << irq;
+
+	if (irq < 8) {
+		outb(0x0B,0x20);		/* ISR register */
+		value = inb(0x20) & irqmask;
+		outb(0x0A,0x20);		/* back to the IRR register */
+		return value;
+	}
+	outb(0x0B,0xA0);		/* ISR register */
+	value = inb(0xA0) & (irqmask >> 8);
+	outb(0x0A,0xA0);		/* back to the IRR register */
+	return value;
+}
+
+/*
+ * Careful! The 8259A is a fragile beast, it pretty
+ * much _has_ to be done exactly like this (mask it
+ * first, _then_ send the EOI, and the order of EOI
+ * to the two 8259s is important!
+ */
+void mask_and_ack_8259A(unsigned int irq)
+{
+	unsigned int irqmask = 1 << irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	/*
+	 * Lightweight spurious IRQ detection. We do not want to overdo
+	 * spurious IRQ handling - it's usually a sign of hardware problems, so
+	 * we only do the checks we can do without slowing down good hardware
+	 * nnecesserily.
+	 *
+	 * Note that IRQ7 and IRQ15 (the two spurious IRQs usually resulting
+	 * rom the 8259A-1|2 PICs) occur even if the IRQ is masked in the 8259A.
+	 * Thus we can check spurious 8259A IRQs without doing the quite slow
+	 * i8259A_irq_real() call for every IRQ.  This does not cover 100% of
+	 * spurious interrupts, but should be enough to warn the user that
+	 * there is something bad going on ...
+	 */
+	if (cached_irq_mask & irqmask)
+		goto spurious_8259A_irq;
+	cached_irq_mask |= irqmask;
+
+handle_real_irq:
+	if (irq & 8) {
+		inb(0xA1);		/* DUMMY - (do we need this?) */
+		outb(cached_A1,0xA1);
+		outb(0x60+(irq&7),0xA0);/* 'Specific EOI' to slave */
+		outb(0x62,0x20);	/* 'Specific EOI' to master-IRQ2 */
+	} else {
+		inb(0x21);		/* DUMMY - (do we need this?) */
+		outb(cached_21,0x21);
+		outb(0x60+irq,0x20);	/* 'Specific EOI' to master */
+	}
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+	return;
+
+spurious_8259A_irq:
+	/*
+	 * this is the slow path - should happen rarely.
+	 */
+	if (i8259A_irq_real(irq))
+		/*
+		 * oops, the IRQ _is_ in service according to the
+		 * 8259A - not spurious, go handle it.
+		 */
+		goto handle_real_irq;
+
+	{
+		static int spurious_irq_mask = 0;
+		/*
+		 * At this point we can be sure the IRQ is spurious,
+		 * lets ACK and report it. [once per IRQ]
+		 */
+		if (!(spurious_irq_mask & irqmask)) {
+			printk("spurious 8259A interrupt: IRQ%d.\n", irq);
+			spurious_irq_mask |= irqmask;
+		}
+		atomic_inc(&irq_err_count);
+		/*
+		 * Theoretically we do not have to handle this IRQ,
+		 * but in Linux this does not cause problems and is
+		 * simpler for us.
+		 */
+		goto handle_real_irq;
+	}
+}
+
+static int i8259A_resume(struct sys_device *dev)
+{
+	init_8259A(0);
+	return 0;
+}
+
+static struct sysdev_class i8259_sysdev_class = {
+	set_kset_name("i8259"),
+	.resume = i8259A_resume,
+};
+
+static struct sys_device device_i8259A = {
+	.id	= 0,
+	.cls	= &i8259_sysdev_class,
+};
+
+static int __init i8259A_init_sysfs(void)
+{
+	int error = sysdev_class_register(&i8259_sysdev_class);
+	if (!error)
+		error = sys_device_register(&device_i8259A);
+	return error;
+}
+
+device_initcall(i8259A_init_sysfs);
+
+void __init init_8259A(int auto_eoi)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	outb(0xff, 0x21);	/* mask all of 8259A-1 */
+	outb(0xff, 0xA1);	/* mask all of 8259A-2 */
+
+	/*
+	 * outb_p - this has to work on a wide range of PC hardware.
+	 */
+	outb_p(0x11, 0x20);	/* ICW1: select 8259A-1 init */
+	outb_p(0x00, 0x21);	/* ICW2: 8259A-1 IR0-7 mapped to 0x00-0x07 */
+	outb_p(0x04, 0x21);	/* 8259A-1 (the master) has a slave on IR2 */
+	if (auto_eoi)
+		outb_p(0x03, 0x21);	/* master does Auto EOI */
+	else
+		outb_p(0x01, 0x21);	/* master expects normal EOI */
+
+	outb_p(0x11, 0xA0);	/* ICW1: select 8259A-2 init */
+	outb_p(0x08, 0xA1);	/* ICW2: 8259A-2 IR0-7 mapped to 0x08-0x0f */
+	outb_p(0x02, 0xA1);	/* 8259A-2 is a slave on master's IR2 */
+	outb_p(0x01, 0xA1);	/* (slave's support for AEOI in flat mode
+				    is to be investigated) */
+
+	if (auto_eoi)
+		/*
+		 * in AEOI mode we just have to mask the interrupt
+		 * when acking.
+		 */
+		i8259A_irq_type.ack = disable_8259A_irq;
+	else
+		i8259A_irq_type.ack = mask_and_ack_8259A;
+
+	udelay(100);		/* wait for 8259A to initialize */
+
+	outb(cached_21, 0x21);	/* restore master IRQ mask */
+	outb(cached_A1, 0xA1);	/* restore slave IRQ mask */
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+asmlinkage void i8259_do_irq(int irq, struct pt_regs regs)
+{
+	panic("i8259_do_irq: I want to be implemented");
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+	no_action, 0, 0, "cascade", NULL, NULL
+};
+
+static struct resource pic1_io_resource = {
+	"pic1", 0x20, 0x3f, IORESOURCE_BUSY
+};
+
+static struct resource pic2_io_resource = {
+	"pic2", 0xa0, 0xbf, IORESOURCE_BUSY
+};
+
+/*
+ * On systems with i8259-style interrupt controllers we assume for
+ * driver compatibility reasons interrupts 0 - 15 to be the i8295
+ * interrupts even if the hardware uses a different interrupt numbering.
+ */
+void __init init_i8259_irqs (void)
+{
+	int i;
+
+	request_resource(&ioport_resource, &pic1_io_resource);
+	request_resource(&ioport_resource, &pic2_io_resource);
+
+	init_8259A(0);
+
+	for (i = 0; i < 16; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		irq_desc[i].handler = &i8259A_irq_type;
+	}
+
+	setup_irq(2, &irq2);
+}

arch/mips64/kernel/init_task.c

 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/init_task.h>
+#include <linux/fs.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 
 static struct fs_struct init_fs = INIT_FS;
 static struct files_struct init_files = INIT_FILES;
-static struct signal_struct init_signals = INIT_SIGNALS;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct mm_struct init_mm = INIT_MM(init_mm);
 
 /*
- * Initial task structure.
+ * Initial thread structure.
  *
  * We need to make sure that this is 8192-byte aligned due to the
  * way process stacks are handled. This is done by making sure
@@ -20,6 +22,13 @@ struct mm_struct init_mm = INIT_MM(init_mm);
  *
  * The things we do for performance..
  */
-union task_union init_task_union
+union thread_union init_thread_union
 	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_TASK(init_task_union.task) };
+		{ INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);

arch/mips64/kernel/irq_cpu.c

+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2001 Ralf Baechle
+ *
+ * This file define the irq handler for MIPS CPU interrupts.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * Almost all MIPS CPUs define 8 interrupt sources.  They are typically
+ * level triggered (i.e., cannot be cleared from CPU; must be cleared from
+ * device).  The first two are software interrupts which we don't really
+ * use or support.  The last one is usually cpu timer interrupt if a counter
+ * register is present.
+ *
+ * Don't even think about using this on SMP.  You have been warned.
+ *
+ * This file exports one global function:
+ *	mips_cpu_irq_init(u32 irq_base);
+ */
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+static int mips_cpu_irq_base;
+
+static inline void unmask_mips_irq(unsigned int irq)
+{
+	clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+	set_c0_status(0x100 << (irq - mips_cpu_irq_base));
+}
+
+static inline void mask_mips_irq(unsigned int irq)
+{
+	clear_c0_status(0x100 << (irq - mips_cpu_irq_base));
+}
+
+static inline void mips_cpu_irq_enable(unsigned int irq)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	unmask_mips_irq(irq);
+	local_irq_restore(flags);
+}
+
+static void mips_cpu_irq_disable(unsigned int irq)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	mask_mips_irq(irq);
+	local_irq_restore(flags);
+}
+
+static unsigned int mips_cpu_irq_startup(unsigned int irq)
+{
+	mips_cpu_irq_enable(irq);
+
+	return 0;
+}
+
+#define	mips_cpu_irq_shutdown	mips_cpu_irq_disable
+
+/*
+ * While we ack the interrupt interrupts are disabled and thus we don't need
+ * to deal with concurrency issues.  Same for mips_cpu_irq_end.
+ */
+static void mips_cpu_irq_ack(unsigned int irq)
+{
+	/* Only necessary for soft interrupts */
+	clear_c0_cause(1 << (irq - mips_cpu_irq_base + 8));
+
+	mask_mips_irq(irq);
+}
+
+static void mips_cpu_irq_end(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		unmask_mips_irq(irq);
+}
+
+static hw_irq_controller mips_cpu_irq_controller = {
+	"CPU_irq",
+	mips_cpu_irq_startup,
+	mips_cpu_irq_shutdown,
+	mips_cpu_irq_enable,
+	mips_cpu_irq_disable,
+	mips_cpu_irq_ack,
+	mips_cpu_irq_end,
+	NULL			/* no affinity stuff for UP */
+};
+
+
+void mips_cpu_irq_init(u32 irq_base)
+{
+	u32 i;
+
+	for (i = irq_base; i < irq_base + 8; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 1;
+		irq_desc[i].handler = &mips_cpu_irq_controller;
+	}
+
+	mips_cpu_irq_base = irq_base;
+}

arch/mips64/kernel/mips64_ksyms.c

@@ -13,9 +13,9 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
 #include <linux/in6.h>
 #include <linux/pci.h>
+#include <linux/tty.h>
 
 #include <asm/bootinfo.h>
 #include <asm/dma.h>
@@ -38,7 +38,10 @@ extern long __strnlen_user_nocheck_asm(const char *s);
 extern long __strnlen_user_asm(const char *s);
 
 EXPORT_SYMBOL(mips_machtype);
+
+#ifdef CONFIG_EISA
 EXPORT_SYMBOL(EISA_bus);
+#endif
 
 /*
  * String functions
@@ -53,12 +56,9 @@ EXPORT_SYMBOL_NOVERS(strlen);
 EXPORT_SYMBOL_NOVERS(strncat);
 EXPORT_SYMBOL_NOVERS(strnlen);
 EXPORT_SYMBOL_NOVERS(strrchr);
-EXPORT_SYMBOL_NOVERS(strsep);
 EXPORT_SYMBOL_NOVERS(strpbrk);
 
 EXPORT_SYMBOL(_clear_page);
-EXPORT_SYMBOL(enable_irq);
-EXPORT_SYMBOL(disable_irq);
 EXPORT_SYMBOL(kernel_thread);
 
 /*
@@ -74,43 +74,16 @@ EXPORT_SYMBOL_NOVERS(__strnlen_user_nocheck_asm);
 EXPORT_SYMBOL_NOVERS(__strnlen_user_asm);
 
 
-/*
- * Functions to control caches.
- */
-EXPORT_SYMBOL(_flush_page_to_ram);
-EXPORT_SYMBOL(_flush_cache_l1);
-#ifndef CONFIG_COHERENT_IO
-EXPORT_SYMBOL(_dma_cache_wback_inv);
-EXPORT_SYMBOL(_dma_cache_inv);
-#endif
-
 EXPORT_SYMBOL(invalid_pte_table);
 
-/*
- * Base address of ports for Intel style I/O.
- */
-#if defined (CONFIG_PCI) || defined (CONFIG_ISA)
-EXPORT_SYMBOL(mips_io_port_base);
-#endif
-
 /*
  * Kernel hacking ...
  */
 #include <asm/branch.h>
 #include <linux/sched.h>
 
-int register_fpe(void (*handler)(struct pt_regs *regs, unsigned int fcr31));
-int unregister_fpe(void (*handler)(struct pt_regs *regs, unsigned int fcr31));
-
-#ifdef CONFIG_MIPS_FPE_MODULE
-EXPORT_SYMBOL(__compute_return_epc);
-EXPORT_SYMBOL(register_fpe);
-EXPORT_SYMBOL(unregister_fpe);
-#endif
-
 #ifdef CONFIG_VT
 EXPORT_SYMBOL(screen_info);
 #endif
 
 EXPORT_SYMBOL(get_wchan);
-EXPORT_SYMBOL(_flush_tlb_page);

arch/mips64/kernel/pci-dma.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000  Ani Joshi <ajoshi@unixbox.com>
+ * Copyright (C) 2000, 2001  Ralf Baechle <ralf@gnu.org>
+ * swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+
+#include <asm/io.h>
+
+#ifndef UNCAC_BASE	/* Hack ... */
+#define UNCAC_BASE	0x9000000000000000UL
+#endif
+
+void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+			   dma_addr_t * dma_handle)
+{
+	void *ret;
+	int gfp = GFP_ATOMIC;
+	struct pci_bus *bus = NULL;
+
+#ifdef CONFIG_ISA
+	if (hwdev == NULL || hwdev->dma_mask != 0xffffffff)
+		gfp |= GFP_DMA;
+#endif
+	ret = (void *) __get_free_pages(gfp, get_order(size));
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		if (hwdev)
+			bus = hwdev->bus;
+		*dma_handle = bus_to_baddr(bus, __pa(ret));
+#ifdef CONFIG_NONCOHERENT_IO
+		dma_cache_wback_inv((unsigned long) ret, size);
+		ret = UNCAC_ADDR(ret);
+#endif
+	}
+
+	return ret;
+}
+
+void pci_free_consistent(struct pci_dev *hwdev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle)
+{
+	unsigned long addr = (unsigned long) vaddr;
+
+#ifdef CONFIG_NONCOHERENT_IO
+	addr = CAC_ADDR(addr);
+#endif
+	free_pages(addr, get_order(size));
+}
+
+EXPORT_SYMBOL(pci_alloc_consistent);
+EXPORT_SYMBOL(pci_free_consistent);

arch/mips64/kernel/r4k_fpu.S

@@ -31,7 +31,7 @@
 
 	.set	noreorder
 	/* Save floating point context */
-LEAF(save_fp_context)
+LEAF(_save_fp_context)
 	mfc0	t1, CP0_STATUS
 	sll	t2, t1,5
 
@@ -79,7 +79,7 @@ LEAF(save_fp_context)
 
 	jr	ra
 	 li	v0, 0					# success
-	END(save_fp_context)
+	END(_save_fp_context)
 
 /*
  * Restore FPU state:
@@ -90,7 +90,7 @@ LEAF(save_fp_context)
  * frame on the current content of c0_status, not on the content of the
  * stack frame which might have been changed by the user.
  */
-LEAF(restore_fp_context)
+LEAF(_restore_fp_context)
 	mfc0	t1, CP0_STATUS
 	sll	t0, t1,5
 	bgez	t0, 1f
@@ -139,7 +139,7 @@ LEAF(restore_fp_context)
 	ctc1	t0, fcr31
 	jr	ra
 	 li	v0, 0					# success
-	END(restore_fp_context)
+	END(_restore_fp_context)
 
 	.type	fault@function
 	.ent	fault

arch/mips64/lib/ide-no.c

@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/ide.h>
 #include <asm/hdreg.h>
-#include <asm/ptrace.h>
 
 static int no_ide_default_irq(ide_ioreg_t base)
 {