ahci: Convert driver to use modern PM hooks

In order to add support for runtime PM to the ahci driver we first need to
convert the driver to use modern non-legacy system suspend hooks. There
should be no functional changes.

tj: Updated .driver.pm init for older compilers as suggested by Andy
    and Chrsitoph.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

drivers/ata/ahci.c

@@ -93,9 +93,9 @@ static void ahci_mcp89_apple_enable(struct pci_dev *pdev);
 static bool is_mcp89_apple(struct pci_dev *pdev);
 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 				unsigned long deadline);
-#ifdef CONFIG_PM
-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
-static int ahci_pci_device_resume(struct pci_dev *pdev);
+#ifdef CONFIG_PM_SLEEP
+static int ahci_pci_device_suspend(struct device *dev);
+static int ahci_pci_device_resume(struct device *dev);
 #endif
 
 static struct scsi_host_template ahci_sht = {
@@ -557,16 +557,18 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ }	/* terminate list */
 };
 
+static const struct dev_pm_ops ahci_pci_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ahci_pci_device_suspend, ahci_pci_device_resume)
+};
 
 static struct pci_driver ahci_pci_driver = {
 	.name			= DRV_NAME,
 	.id_table		= ahci_pci_tbl,
 	.probe			= ahci_init_one,
 	.remove			= ata_pci_remove_one,
-#ifdef CONFIG_PM
-	.suspend		= ahci_pci_device_suspend,
-	.resume			= ahci_pci_device_resume,
-#endif
+	.driver = {
+		.pm		= &ahci_pci_pm_ops,
+	},
 };
 
 #if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
@@ -794,22 +796,21 @@ static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class,
 }
 
 
-#ifdef CONFIG_PM
-static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+static int ahci_pci_device_suspend(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct ata_host *host = pci_get_drvdata(pdev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	void __iomem *mmio = hpriv->mmio;
 	u32 ctl;
 
-	if (mesg.event & PM_EVENT_SUSPEND &&
-	    hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
 		dev_err(&pdev->dev,
 			"BIOS update required for suspend/resume\n");
 		return -EIO;
 	}
 
-	if (mesg.event & PM_EVENT_SLEEP) {
 	/* AHCI spec rev1.1 section 8.3.3:
 	 * Software must disable interrupts prior to requesting a
 	 * transition of the HBA to D3 state.
@@ -818,20 +819,16 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 	ctl &= ~HOST_IRQ_EN;
 	writel(ctl, mmio + HOST_CTL);
 	readl(mmio + HOST_CTL); /* flush */
-	}
 
-	return ata_pci_device_suspend(pdev, mesg);
+	return ata_host_suspend(host, PMSG_SUSPEND);
 }
 
-static int ahci_pci_device_resume(struct pci_dev *pdev)
+static int ahci_pci_device_resume(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct ata_host *host = pci_get_drvdata(pdev);
 	int rc;
 
-	rc = ata_pci_device_do_resume(pdev);
-	if (rc)
-		return rc;
-
 	/* Apple BIOS helpfully mangles the registers on resume */
 	if (is_mcp89_apple(pdev))
 		ahci_mcp89_apple_enable(pdev);