Commit f1f76d7a authored by Wambui Karuga's avatar Wambui Karuga Committed by Jani Nikula

drm/i915/vlv_dsi: conversion to drm_device based logging macros.

Converts the printk based logging macros to the struct drm_device based
logging macros in i915/display/vlv_dsi.c.
This was done using the following coccinelle script that transforms
based on the existence of a drm_i915_private device pointer.
@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Checkpatch warnings were addressed manually.
Signed-off-by: default avatarWambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130083229.12889-3-wambui.karugax@gmail.com
parent b2f7c0f1
......@@ -85,7 +85,7 @@ void vlv_dsi_wait_for_fifo_empty(struct intel_dsi *intel_dsi, enum port port)
if (intel_de_wait_for_set(dev_priv, MIPI_GEN_FIFO_STAT(port),
mask, 100))
DRM_ERROR("DPI FIFOs are not empty\n");
drm_err(&dev_priv->drm, "DPI FIFOs are not empty\n");
}
static void write_data(struct drm_i915_private *dev_priv,
......@@ -154,7 +154,8 @@ static ssize_t intel_dsi_host_transfer(struct mipi_dsi_host *host,
if (packet.payload_length) {
if (intel_de_wait_for_clear(dev_priv, MIPI_GEN_FIFO_STAT(port),
data_mask, 50))
DRM_ERROR("Timeout waiting for HS/LP DATA FIFO !full\n");
drm_err(&dev_priv->drm,
"Timeout waiting for HS/LP DATA FIFO !full\n");
write_data(dev_priv, data_reg, packet.payload,
packet.payload_length);
......@@ -167,7 +168,8 @@ static ssize_t intel_dsi_host_transfer(struct mipi_dsi_host *host,
if (intel_de_wait_for_clear(dev_priv, MIPI_GEN_FIFO_STAT(port),
ctrl_mask, 50)) {
DRM_ERROR("Timeout waiting for HS/LP CTRL FIFO !full\n");
drm_err(&dev_priv->drm,
"Timeout waiting for HS/LP CTRL FIFO !full\n");
}
intel_de_write(dev_priv, ctrl_reg,
......@@ -178,7 +180,8 @@ static ssize_t intel_dsi_host_transfer(struct mipi_dsi_host *host,
data_mask = GEN_READ_DATA_AVAIL;
if (intel_de_wait_for_set(dev_priv, MIPI_INTR_STAT(port),
data_mask, 50))
DRM_ERROR("Timeout waiting for read data.\n");
drm_err(&dev_priv->drm,
"Timeout waiting for read data.\n");
read_data(dev_priv, data_reg, msg->rx_buf, msg->rx_len);
}
......@@ -229,13 +232,15 @@ static int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs,
/* XXX: old code skips write if control unchanged */
if (cmd == intel_de_read(dev_priv, MIPI_DPI_CONTROL(port)))
DRM_DEBUG_KMS("Same special packet %02x twice in a row.\n", cmd);
drm_dbg_kms(&dev_priv->drm,
"Same special packet %02x twice in a row.\n", cmd);
intel_de_write(dev_priv, MIPI_DPI_CONTROL(port), cmd);
mask = SPL_PKT_SENT_INTERRUPT;
if (intel_de_wait_for_set(dev_priv, MIPI_INTR_STAT(port), mask, 100))
DRM_ERROR("Video mode command 0x%08x send failed.\n", cmd);
drm_err(&dev_priv->drm,
"Video mode command 0x%08x send failed.\n", cmd);
return 0;
}
......@@ -267,7 +272,7 @@ static int intel_dsi_compute_config(struct intel_encoder *encoder,
struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
int ret;
DRM_DEBUG_KMS("\n");
drm_dbg_kms(&dev_priv->drm, "\n");
pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
if (fixed_mode) {
......@@ -354,7 +359,7 @@ static bool glk_dsi_enable_io(struct intel_encoder *encoder)
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_de_wait_for_set(dev_priv, MIPI_CTRL(port),
GLK_MIPIIO_PORT_POWERED, 20))
DRM_ERROR("MIPIO port is powergated\n");
drm_err(&dev_priv->drm, "MIPIO port is powergated\n");
}
/* Check for cold boot scenario */
......@@ -377,7 +382,7 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder)
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_de_wait_for_set(dev_priv, MIPI_CTRL(port),
GLK_PHY_STATUS_PORT_READY, 20))
DRM_ERROR("PHY is not ON\n");
drm_err(&dev_priv->drm, "PHY is not ON\n");
}
/* Get IO out of reset */
......@@ -403,7 +408,7 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder)
/* Wait for ULPS active */
if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
GLK_ULPS_NOT_ACTIVE, 20))
DRM_ERROR("ULPS not active\n");
drm_err(&dev_priv->drm, "ULPS not active\n");
/* Exit ULPS */
val = intel_de_read(dev_priv, MIPI_DEVICE_READY(port));
......@@ -427,14 +432,16 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder)
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_de_wait_for_set(dev_priv, MIPI_CTRL(port),
GLK_DATA_LANE_STOP_STATE, 20))
DRM_ERROR("Date lane not in STOP state\n");
drm_err(&dev_priv->drm,
"Date lane not in STOP state\n");
}
/* Wait for AFE LATCH */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_de_wait_for_set(dev_priv, BXT_MIPI_PORT_CTRL(port),
AFE_LATCHOUT, 20))
DRM_ERROR("D-PHY not entering LP-11 state\n");
drm_err(&dev_priv->drm,
"D-PHY not entering LP-11 state\n");
}
}
......@@ -445,7 +452,7 @@ static void bxt_dsi_device_ready(struct intel_encoder *encoder)
enum port port;
u32 val;
DRM_DEBUG_KMS("\n");
drm_dbg_kms(&dev_priv->drm, "\n");
/* Enable MIPI PHY transparent latch */
for_each_dsi_port(port, intel_dsi->ports) {
......@@ -473,7 +480,7 @@ static void vlv_dsi_device_ready(struct intel_encoder *encoder)
enum port port;
u32 val;
DRM_DEBUG_KMS("\n");
drm_dbg_kms(&dev_priv->drm, "\n");
vlv_flisdsi_get(dev_priv);
/* program rcomp for compliance, reduce from 50 ohms to 45 ohms
......@@ -540,14 +547,15 @@ static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder)
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
GLK_PHY_STATUS_PORT_READY, 20))
DRM_ERROR("PHY is not turning OFF\n");
drm_err(&dev_priv->drm, "PHY is not turning OFF\n");
}
/* Wait for Pwr ACK bit to unset */
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
GLK_MIPIIO_PORT_POWERED, 20))
DRM_ERROR("MIPI IO Port is not powergated\n");
drm_err(&dev_priv->drm,
"MIPI IO Port is not powergated\n");
}
}
......@@ -567,7 +575,7 @@ static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder)
for_each_dsi_port(port, intel_dsi->ports) {
if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
GLK_PHY_STATUS_PORT_READY, 20))
DRM_ERROR("PHY is not turning OFF\n");
drm_err(&dev_priv->drm, "PHY is not turning OFF\n");
}
/* Clear MIPI mode */
......@@ -590,7 +598,7 @@ static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
enum port port;
DRM_DEBUG_KMS("\n");
drm_dbg_kms(&dev_priv->drm, "\n");
for_each_dsi_port(port, intel_dsi->ports) {
/* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */
i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
......@@ -616,7 +624,7 @@ static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
if ((IS_GEN9_LP(dev_priv) || port == PORT_A) &&
intel_de_wait_for_clear(dev_priv, port_ctrl,
AFE_LATCHOUT, 30))
DRM_ERROR("DSI LP not going Low\n");
drm_err(&dev_priv->drm, "DSI LP not going Low\n");
/* Disable MIPI PHY transparent latch */
val = intel_de_read(dev_priv, port_ctrl);
......@@ -764,7 +772,7 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,
u32 val;
bool glk_cold_boot = false;
DRM_DEBUG_KMS("\n");
drm_dbg_kms(&dev_priv->drm, "\n");
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
......@@ -907,7 +915,7 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder,
enum port port;
u32 val;
DRM_DEBUG_KMS("\n");
drm_dbg_kms(&dev_priv->drm, "\n");
if (IS_GEN9_LP(dev_priv)) {
intel_crtc_vblank_off(old_crtc_state);
......@@ -982,7 +990,7 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
enum port port;
bool active = false;
DRM_DEBUG_KMS("\n");
drm_dbg_kms(&dev_priv->drm, "\n");
wakeref = intel_display_power_get_if_enabled(dev_priv,
encoder->power_domain);
......@@ -1217,7 +1225,7 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 pclk;
DRM_DEBUG_KMS("\n");
drm_dbg_kms(&dev_priv->drm, "\n");
pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
......@@ -1351,7 +1359,7 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
u32 val, tmp;
u16 mode_hdisplay;
DRM_DEBUG_KMS("pipe %c\n", pipe_name(intel_crtc->pipe));
drm_dbg_kms(&dev_priv->drm, "pipe %c\n", pipe_name(intel_crtc->pipe));
mode_hdisplay = adjusted_mode->crtc_hdisplay;
......@@ -1727,7 +1735,8 @@ static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
if (prepare_cnt > PREPARE_CNT_MAX) {
DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
drm_dbg_kms(&dev_priv->drm, "prepare count too high %u\n",
prepare_cnt);
prepare_cnt = PREPARE_CNT_MAX;
}
......@@ -1747,7 +1756,8 @@ static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
exit_zero_cnt += 1;
if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
drm_dbg_kms(&dev_priv->drm, "exit zero count too high %u\n",
exit_zero_cnt);
exit_zero_cnt = EXIT_ZERO_CNT_MAX;
}
......@@ -1757,7 +1767,8 @@ static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
* ui_den, ui_num * mul);
if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
drm_dbg_kms(&dev_priv->drm, "clock zero count too high %u\n",
clk_zero_cnt);
clk_zero_cnt = CLK_ZERO_CNT_MAX;
}
......@@ -1766,7 +1777,8 @@ static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
if (trail_cnt > TRAIL_CNT_MAX) {
DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
drm_dbg_kms(&dev_priv->drm, "trail count too high %u\n",
trail_cnt);
trail_cnt = TRAIL_CNT_MAX;
}
......@@ -1841,7 +1853,7 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
enum port port;
enum pipe pipe;
DRM_DEBUG_KMS("\n");
drm_dbg_kms(&dev_priv->drm, "\n");
/* There is no detection method for MIPI so rely on VBT */
if (!intel_bios_is_dsi_present(dev_priv, &port))
......@@ -1920,18 +1932,18 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
}
if (!intel_dsi_vbt_init(intel_dsi, MIPI_DSI_GENERIC_PANEL_ID)) {
DRM_DEBUG_KMS("no device found\n");
drm_dbg_kms(&dev_priv->drm, "no device found\n");
goto err;
}
/* Use clock read-back from current hw-state for fastboot */
current_mode = intel_encoder_current_mode(intel_encoder);
if (current_mode) {
DRM_DEBUG_KMS("Calculated pclk %d GOP %d\n",
drm_dbg_kms(&dev_priv->drm, "Calculated pclk %d GOP %d\n",
intel_dsi->pclk, current_mode->clock);
if (intel_fuzzy_clock_check(intel_dsi->pclk,
current_mode->clock)) {
DRM_DEBUG_KMS("Using GOP pclk\n");
drm_dbg_kms(&dev_priv->drm, "Using GOP pclk\n");
intel_dsi->pclk = current_mode->clock;
}
......@@ -1959,7 +1971,7 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
mutex_unlock(&dev->mode_config.mutex);
if (!fixed_mode) {
DRM_DEBUG_KMS("no fixed mode\n");
drm_dbg_kms(&dev_priv->drm, "no fixed mode\n");
goto err_cleanup_connector;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment