Commit f22d9c03 authored by Amit Daniel Kachhap's avatar Amit Daniel Kachhap Committed by Zhang Rui

thermal: exynos5: add exynos5250 thermal sensor driver support

Insert exynos5 TMU sensor changes into the thermal driver.  Some exynos4
changes are made generic for exynos series.

[akpm@linux-foundation.org: fix comment layout]
Signed-off-by: default avatarSangWook Ju <sw.ju@samsung.com>
Signed-off-by: default avatarAmit Daniel Kachhap <amit.kachhap@linaro.org>
Acked-by: default avatarGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Durgadoss <durgadoss.r@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: default avatarZhang Rui <rui.zhang@intel.com>
parent c48cbba6
......@@ -49,7 +49,7 @@ config RCAR_THERMAL
config EXYNOS_THERMAL
tristate "Temperature sensor on Samsung EXYNOS"
depends on ARCH_EXYNOS4 && THERMAL
depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL
help
If you say yes here you get support for TMU (Thermal Managment
Unit) on SAMSUNG EXYNOS series of SoC.
......@@ -33,44 +33,83 @@
#include <linux/kobject.h>
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/platform_data/exynos_thermal.h>
#define EXYNOS4_TMU_REG_TRIMINFO 0x0
#define EXYNOS4_TMU_REG_CONTROL 0x20
#define EXYNOS4_TMU_REG_STATUS 0x28
#define EXYNOS4_TMU_REG_CURRENT_TEMP 0x40
#define EXYNOS4_TMU_REG_THRESHOLD_TEMP 0x44
#define EXYNOS4_TMU_REG_TRIG_LEVEL0 0x50
#define EXYNOS4_TMU_REG_TRIG_LEVEL1 0x54
#define EXYNOS4_TMU_REG_TRIG_LEVEL2 0x58
#define EXYNOS4_TMU_REG_TRIG_LEVEL3 0x5C
#define EXYNOS4_TMU_REG_PAST_TEMP0 0x60
#define EXYNOS4_TMU_REG_PAST_TEMP1 0x64
#define EXYNOS4_TMU_REG_PAST_TEMP2 0x68
#define EXYNOS4_TMU_REG_PAST_TEMP3 0x6C
#define EXYNOS4_TMU_REG_INTEN 0x70
#define EXYNOS4_TMU_REG_INTSTAT 0x74
#define EXYNOS4_TMU_REG_INTCLEAR 0x78
#define EXYNOS4_TMU_GAIN_SHIFT 8
#define EXYNOS4_TMU_REF_VOLTAGE_SHIFT 24
#define EXYNOS4_TMU_TRIM_TEMP_MASK 0xff
#define EXYNOS4_TMU_CORE_ON 3
#define EXYNOS4_TMU_CORE_OFF 2
#define EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET 50
#define EXYNOS4_TMU_TRIG_LEVEL0_MASK 0x1
#define EXYNOS4_TMU_TRIG_LEVEL1_MASK 0x10
#define EXYNOS4_TMU_TRIG_LEVEL2_MASK 0x100
#define EXYNOS4_TMU_TRIG_LEVEL3_MASK 0x1000
#define EXYNOS4_TMU_INTCLEAR_VAL 0x1111
struct exynos4_tmu_data {
struct exynos4_tmu_platform_data *pdata;
#include <linux/of.h>
#include <plat/cpu.h>
/* Exynos generic registers */
#define EXYNOS_TMU_REG_TRIMINFO 0x0
#define EXYNOS_TMU_REG_CONTROL 0x20
#define EXYNOS_TMU_REG_STATUS 0x28
#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
#define EXYNOS_TMU_REG_INTEN 0x70
#define EXYNOS_TMU_REG_INTSTAT 0x74
#define EXYNOS_TMU_REG_INTCLEAR 0x78
#define EXYNOS_TMU_TRIM_TEMP_MASK 0xff
#define EXYNOS_TMU_GAIN_SHIFT 8
#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
#define EXYNOS_TMU_CORE_ON 3
#define EXYNOS_TMU_CORE_OFF 2
#define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50
/* Exynos4210 specific registers */
#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
/* Exynos5250 and Exynos4412 specific registers */
#define EXYNOS_TMU_TRIMINFO_CON 0x14
#define EXYNOS_THD_TEMP_RISE 0x50
#define EXYNOS_THD_TEMP_FALL 0x54
#define EXYNOS_EMUL_CON 0x80
#define EXYNOS_TRIMINFO_RELOAD 0x1
#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 16)
#define EXYNOS_MUX_ADDR_VALUE 6
#define EXYNOS_MUX_ADDR_SHIFT 20
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
#define EFUSE_MIN_VALUE 40
#define EFUSE_MAX_VALUE 100
/* In-kernel thermal framework related macros & definations */
#define SENSOR_NAME_LEN 16
#define MAX_TRIP_COUNT 8
#define MAX_COOLING_DEVICE 4
#define ACTIVE_INTERVAL 500
#define IDLE_INTERVAL 10000
/* CPU Zone information */
#define PANIC_ZONE 4
#define WARN_ZONE 3
#define MONITOR_ZONE 2
#define SAFE_ZONE 1
#define GET_ZONE(trip) (trip + 2)
#define GET_TRIP(zone) (zone - 2)
struct exynos_tmu_data {
struct exynos_tmu_platform_data *pdata;
struct resource *mem;
void __iomem *base;
int irq;
enum soc_type soc;
struct work_struct irq_work;
struct mutex lock;
struct clk *clk;
......@@ -81,11 +120,12 @@ struct exynos4_tmu_data {
* TMU treats temperature as a mapped temperature code.
* The temperature is converted differently depending on the calibration type.
*/
static int temp_to_code(struct exynos4_tmu_data *data, u8 temp)
static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
{
struct exynos4_tmu_platform_data *pdata = data->pdata;
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp_code;
if (data->soc == SOC_ARCH_EXYNOS4210)
/* temp should range between 25 and 125 */
if (temp < 25 || temp > 125) {
temp_code = -EINVAL;
......@@ -102,7 +142,7 @@ static int temp_to_code(struct exynos4_tmu_data *data, u8 temp)
temp_code = temp + data->temp_error1 - 25;
break;
default:
temp_code = temp + EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
temp_code = temp + EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET;
break;
}
out:
......@@ -113,11 +153,12 @@ static int temp_to_code(struct exynos4_tmu_data *data, u8 temp)
* Calculate a temperature value from a temperature code.
* The unit of the temperature is degree Celsius.
*/
static int code_to_temp(struct exynos4_tmu_data *data, u8 temp_code)
static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
{
struct exynos4_tmu_platform_data *pdata = data->pdata;
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp;
if (data->soc == SOC_ARCH_EXYNOS4210)
/* temp_code should range between 75 and 175 */
if (temp_code < 75 || temp_code > 175) {
temp = -ENODATA;
......@@ -133,34 +174,44 @@ static int code_to_temp(struct exynos4_tmu_data *data, u8 temp_code)
temp = temp_code - data->temp_error1 + 25;
break;
default:
temp = temp_code - EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
temp = temp_code - EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET;
break;
}
out:
return temp;
}
static int exynos4_tmu_initialize(struct platform_device *pdev)
static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
struct exynos4_tmu_platform_data *pdata = data->pdata;
unsigned int status, trim_info;
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
unsigned int status, trim_info, rising_threshold;
int ret = 0, threshold_code;
mutex_lock(&data->lock);
clk_enable(data->clk);
status = readb(data->base + EXYNOS4_TMU_REG_STATUS);
status = readb(data->base + EXYNOS_TMU_REG_STATUS);
if (!status) {
ret = -EBUSY;
goto out;
}
if (data->soc == SOC_ARCH_EXYNOS) {
__raw_writel(EXYNOS_TRIMINFO_RELOAD,
data->base + EXYNOS_TMU_TRIMINFO_CON);
}
/* Save trimming info in order to perform calibration */
trim_info = readl(data->base + EXYNOS4_TMU_REG_TRIMINFO);
data->temp_error1 = trim_info & EXYNOS4_TMU_TRIM_TEMP_MASK;
data->temp_error2 = ((trim_info >> 8) & EXYNOS4_TMU_TRIM_TEMP_MASK);
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
data->temp_error1 = trim_info & EXYNOS_TMU_TRIM_TEMP_MASK;
data->temp_error2 = ((trim_info >> 8) & EXYNOS_TMU_TRIM_TEMP_MASK);
if ((EFUSE_MIN_VALUE > data->temp_error1) ||
(data->temp_error1 > EFUSE_MAX_VALUE) ||
(data->temp_error2 != 0))
data->temp_error1 = pdata->efuse_value;
if (data->soc == SOC_ARCH_EXYNOS4210) {
/* Write temperature code for threshold */
threshold_code = temp_to_code(data, pdata->threshold);
if (threshold_code < 0) {
......@@ -168,19 +219,47 @@ static int exynos4_tmu_initialize(struct platform_device *pdev)
goto out;
}
writeb(threshold_code,
data->base + EXYNOS4_TMU_REG_THRESHOLD_TEMP);
data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
writeb(pdata->trigger_levels[0],
data->base + EXYNOS4_TMU_REG_TRIG_LEVEL0);
data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0);
writeb(pdata->trigger_levels[1],
data->base + EXYNOS4_TMU_REG_TRIG_LEVEL1);
data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL1);
writeb(pdata->trigger_levels[2],
data->base + EXYNOS4_TMU_REG_TRIG_LEVEL2);
data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL2);
writeb(pdata->trigger_levels[3],
data->base + EXYNOS4_TMU_REG_TRIG_LEVEL3);
data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL3);
writel(EXYNOS4_TMU_INTCLEAR_VAL,
data->base + EXYNOS4_TMU_REG_INTCLEAR);
writel(EXYNOS4210_TMU_INTCLEAR_VAL,
data->base + EXYNOS_TMU_REG_INTCLEAR);
} else if (data->soc == SOC_ARCH_EXYNOS) {
/* Write temperature code for threshold */
threshold_code = temp_to_code(data, pdata->trigger_levels[0]);
if (threshold_code < 0) {
ret = threshold_code;
goto out;
}
rising_threshold = threshold_code;
threshold_code = temp_to_code(data, pdata->trigger_levels[1]);
if (threshold_code < 0) {
ret = threshold_code;
goto out;
}
rising_threshold |= (threshold_code << 8);
threshold_code = temp_to_code(data, pdata->trigger_levels[2]);
if (threshold_code < 0) {
ret = threshold_code;
goto out;
}
rising_threshold |= (threshold_code << 16);
writel(rising_threshold,
data->base + EXYNOS_THD_TEMP_RISE);
writel(0, data->base + EXYNOS_THD_TEMP_FALL);
writel(EXYNOS_TMU_CLEAR_RISE_INT|EXYNOS_TMU_CLEAR_FALL_INT,
data->base + EXYNOS_TMU_REG_INTCLEAR);
}
out:
clk_disable(data->clk);
mutex_unlock(&data->lock);
......@@ -188,35 +267,41 @@ static int exynos4_tmu_initialize(struct platform_device *pdev)
return ret;
}
static void exynos4_tmu_control(struct platform_device *pdev, bool on)
static void exynos_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
struct exynos4_tmu_platform_data *pdata = data->pdata;
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
unsigned int con, interrupt_en;
mutex_lock(&data->lock);
clk_enable(data->clk);
con = pdata->reference_voltage << EXYNOS4_TMU_REF_VOLTAGE_SHIFT |
pdata->gain << EXYNOS4_TMU_GAIN_SHIFT;
con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT |
pdata->gain << EXYNOS_TMU_GAIN_SHIFT;
if (data->soc == SOC_ARCH_EXYNOS) {
con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT;
con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
}
if (on) {
con |= EXYNOS4_TMU_CORE_ON;
con |= EXYNOS_TMU_CORE_ON;
interrupt_en = pdata->trigger_level3_en << 12 |
pdata->trigger_level2_en << 8 |
pdata->trigger_level1_en << 4 |
pdata->trigger_level0_en;
} else {
con |= EXYNOS4_TMU_CORE_OFF;
con |= EXYNOS_TMU_CORE_OFF;
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + EXYNOS4_TMU_REG_INTEN);
writel(con, data->base + EXYNOS4_TMU_REG_CONTROL);
writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
clk_disable(data->clk);
mutex_unlock(&data->lock);
}
static int exynos4_tmu_read(struct exynos4_tmu_data *data)
static int exynos_tmu_read(struct exynos_tmu_data *data)
{
u8 temp_code;
int temp;
......@@ -224,7 +309,7 @@ static int exynos4_tmu_read(struct exynos4_tmu_data *data)
mutex_lock(&data->lock);
clk_enable(data->clk);
temp_code = readb(data->base + EXYNOS4_TMU_REG_CURRENT_TEMP);
temp_code = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
temp = code_to_temp(data, temp_code);
clk_disable(data->clk);
......@@ -233,25 +318,30 @@ static int exynos4_tmu_read(struct exynos4_tmu_data *data)
return temp;
}
static void exynos4_tmu_work(struct work_struct *work)
static void exynos_tmu_work(struct work_struct *work)
{
struct exynos4_tmu_data *data = container_of(work,
struct exynos4_tmu_data, irq_work);
struct exynos_tmu_data *data = container_of(work,
struct exynos_tmu_data, irq_work);
mutex_lock(&data->lock);
clk_enable(data->clk);
writel(EXYNOS4_TMU_INTCLEAR_VAL, data->base + EXYNOS4_TMU_REG_INTCLEAR);
enable_irq(data->irq);
if (data->soc == SOC_ARCH_EXYNOS)
writel(EXYNOS_TMU_CLEAR_RISE_INT,
data->base + EXYNOS_TMU_REG_INTCLEAR);
else
writel(EXYNOS4210_TMU_INTCLEAR_VAL,
data->base + EXYNOS_TMU_REG_INTCLEAR);
clk_disable(data->clk);
mutex_unlock(&data->lock);
enable_irq(data->irq);
}
static irqreturn_t exynos4_tmu_irq(int irq, void *id)
static irqreturn_t exynos_tmu_irq(int irq, void *id)
{
struct exynos4_tmu_data *data = id;
struct exynos_tmu_data *data = id;
disable_irq_nosync(irq);
schedule_work(&data->irq_work);
......@@ -259,18 +349,17 @@ static irqreturn_t exynos4_tmu_irq(int irq, void *id)
return IRQ_HANDLED;
}
static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
static int __devinit exynos_tmu_probe(struct platform_device *pdev)
{
struct exynos4_tmu_data *data;
struct exynos4_tmu_platform_data *pdata = pdev->dev.platform_data;
struct exynos_tmu_data *data;
struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
int ret;
if (!pdata) {
dev_err(&pdev->dev, "No platform init data supplied.\n");
return -ENODEV;
}
data = kzalloc(sizeof(struct exynos4_tmu_data), GFP_KERNEL);
data = kzalloc(sizeof(struct exynos_tmu_data), GFP_KERNEL);
if (!data) {
dev_err(&pdev->dev, "Failed to allocate driver structure\n");
return -ENOMEM;
......@@ -283,7 +372,7 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
goto err_free;
}
INIT_WORK(&data->irq_work, exynos4_tmu_work);
INIT_WORK(&data->irq_work, exynos_tmu_work);
data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!data->mem) {
......@@ -307,9 +396,8 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
goto err_mem_region;
}
ret = request_irq(data->irq, exynos4_tmu_irq,
IRQF_TRIGGER_RISING,
"exynos4-tmu", data);
ret = request_irq(data->irq, exynos_tmu_irq,
IRQF_TRIGGER_RISING, "exynos-tmu", data);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
goto err_io_remap;
......@@ -322,17 +410,26 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
goto err_irq;
}
if (pdata->type == SOC_ARCH_EXYNOS ||
pdata->type == SOC_ARCH_EXYNOS4210)
data->soc = pdata->type;
else {
ret = -EINVAL;
dev_err(&pdev->dev, "Platform not supported\n");
goto err_clk;
}
data->pdata = pdata;
platform_set_drvdata(pdev, data);
mutex_init(&data->lock);
ret = exynos4_tmu_initialize(pdev);
ret = exynos_tmu_initialize(pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize TMU\n");
goto err_clk;
}
exynos4_tmu_control(pdev, true);
exynos_tmu_control(pdev, true);
return 0;
err_clk:
......@@ -350,11 +447,11 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
return ret;
}
static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
static int __devexit exynos_tmu_remove(struct platform_device *pdev)
{
struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
exynos4_tmu_control(pdev, false);
exynos_tmu_control(pdev, false);
clk_put(data->clk);
......@@ -371,43 +468,43 @@ static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM_SLEEP
static int exynos4_tmu_suspend(struct device *dev)
static int exynos_tmu_suspend(struct device *dev)
{
exynos4_tmu_control(to_platform_device(dev), false);
exynos_tmu_control(to_platform_device(dev), false);
return 0;
}
static int exynos4_tmu_resume(struct device *dev)
static int exynos_tmu_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
exynos4_tmu_initialize(pdev);
exynos4_tmu_control(pdev, true);
exynos_tmu_initialize(pdev);
exynos_tmu_control(pdev, true);
return 0;
}
static SIMPLE_DEV_PM_OPS(exynos4_tmu_pm,
exynos4_tmu_suspend, exynos4_tmu_resume);
#define EXYNOS4_TMU_PM (&exynos4_tmu_pm)
static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
exynos_tmu_suspend, exynos_tmu_resume);
#define EXYNOS_TMU_PM (&exynos_tmu_pm)
#else
#define EXYNOS4_TMU_PM NULL
#define EXYNOS_TMU_PM NULL
#endif
static struct platform_driver exynos4_tmu_driver = {
static struct platform_driver exynos_tmu_driver = {
.driver = {
.name = "exynos4-tmu",
.name = "exynos-tmu",
.owner = THIS_MODULE,
.pm = EXYNOS4_TMU_PM,
.pm = EXYNOS_TMU_PM,
},
.probe = exynos4_tmu_probe,
.remove = __devexit_p(exynos4_tmu_remove),
.probe = exynos_tmu_probe,
.remove = __devexit_p(exynos_tmu_remove),
};
module_platform_driver(exynos4_tmu_driver);
module_platform_driver(exynos_tmu_driver);
MODULE_DESCRIPTION("EXYNOS4 TMU Driver");
MODULE_DESCRIPTION("EXYNOS TMU Driver");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:exynos4-tmu");
MODULE_ALIAS("platform:exynos-tmu");
/*
* exynos_thermal.h - Samsung EXYNOS4 TMU (Thermal Management Unit)
* exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit)
*
* Copyright (C) 2011 Samsung Electronics
* Donggeun Kim <dg77.kim@samsung.com>
......@@ -28,8 +28,12 @@ enum calibration_type {
TYPE_NONE,
};
enum soc_type {
SOC_ARCH_EXYNOS4210 = 1,
SOC_ARCH_EXYNOS,
};
/**
* struct exynos4_tmu_platform_data
* struct exynos_tmu_platform_data
* @threshold: basic temperature for generating interrupt
* 25 <= threshold <= 125 [unit: degree Celsius]
* @trigger_levels: array for each interrupt levels
......@@ -63,11 +67,15 @@ enum calibration_type {
* @reference_voltage: reference voltage of amplifier
* in the positive-TC generator block
* 0 <= reference_voltage <= 31
* @noise_cancel_mode: noise cancellation mode
* 000, 100, 101, 110 and 111 can be different modes
* @type: determines the type of SOC
* @efuse_value: platform defined fuse value
* @cal_type: calibration type for temperature
*
* This structure is required for configuration of exynos4_tmu driver.
* This structure is required for configuration of exynos_tmu driver.
*/
struct exynos4_tmu_platform_data {
struct exynos_tmu_platform_data {
u8 threshold;
u8 trigger_levels[4];
bool trigger_level0_en;
......@@ -77,7 +85,10 @@ struct exynos4_tmu_platform_data {
u8 gain;
u8 reference_voltage;
u8 noise_cancel_mode;
u32 efuse_value;
enum calibration_type cal_type;
enum soc_type type;
};
#endif /* _LINUX_EXYNOS_THERMAL_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment