Merge branch 'broonie/spi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git

Minor features and bug fixes for PXA, OMAP and GPIO deivce drivers and a
cosmetic change to the bitbang driver.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

MAINTAINERS

@@ -7178,6 +7178,7 @@ F:	drivers/clk/spear/
 
 SPI SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
 T:	git git://git.secretlab.ca/git/linux-2.6.git

drivers/spi/Kconfig

@@ -299,7 +299,7 @@ config SPI_PPC4xx
 
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
-	depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL
+	depends on ARCH_PXA || PCI
 	select PXA_SSP if ARCH_PXA
 	help
 	  This enables using a PXA2xx or Sodaville SSP port as a SPI master
@@ -307,7 +307,7 @@ config SPI_PXA2XX
 	  additional documentation can be found a Documentation/spi/pxa2xx.
 
 config SPI_PXA2XX_PCI
-	def_bool SPI_PXA2XX && X86_32 && PCI
+	def_tristate SPI_PXA2XX && PCI
 
 config SPI_RSPI
 	tristate "Renesas RSPI controller"

drivers/spi/spi-bitbang.c

@@ -427,40 +427,41 @@ EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
  */
 int spi_bitbang_start(struct spi_bitbang *bitbang)
 {
-	int	status;
+	struct spi_master *master = bitbang->master;
+	int status;
 
-	if (!bitbang->master || !bitbang->chipselect)
+	if (!master || !bitbang->chipselect)
 		return -EINVAL;
 
 	INIT_WORK(&bitbang->work, bitbang_work);
 	spin_lock_init(&bitbang->lock);
 	INIT_LIST_HEAD(&bitbang->queue);
 
-	if (!bitbang->master->mode_bits)
-		bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+	if (!master->mode_bits)
+		master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
 
-	if (!bitbang->master->transfer)
-		bitbang->master->transfer = spi_bitbang_transfer;
+	if (!master->transfer)
+		master->transfer = spi_bitbang_transfer;
 	if (!bitbang->txrx_bufs) {
 		bitbang->use_dma = 0;
 		bitbang->txrx_bufs = spi_bitbang_bufs;
-		if (!bitbang->master->setup) {
+		if (!master->setup) {
 			if (!bitbang->setup_transfer)
 				bitbang->setup_transfer =
 					 spi_bitbang_setup_transfer;
-			bitbang->master->setup = spi_bitbang_setup;
-			bitbang->master->cleanup = spi_bitbang_cleanup;
+			master->setup = spi_bitbang_setup;
+			master->cleanup = spi_bitbang_cleanup;
 		}
-	} else if (!bitbang->master->setup)
+	} else if (!master->setup)
 		return -EINVAL;
-	if (bitbang->master->transfer == spi_bitbang_transfer &&
+	if (master->transfer == spi_bitbang_transfer &&
 			!bitbang->setup_transfer)
 		return -EINVAL;
 
 	/* this task is the only thing to touch the SPI bits */
 	bitbang->busy = 0;
 	bitbang->workqueue = create_singlethread_workqueue(
-			dev_name(bitbang->master->dev.parent));
+			dev_name(master->dev.parent));
 	if (bitbang->workqueue == NULL) {
 		status = -EBUSY;
 		goto err1;
@@ -469,7 +470,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	/* driver may get busy before register() returns, especially
 	 * if someone registered boardinfo for devices
 	 */
-	status = spi_register_master(bitbang->master);
+	status = spi_register_master(master);
 	if (status < 0)
 		goto err2;
 

drivers/spi/spi-gpio.c

@@ -365,9 +365,26 @@ static int spi_gpio_probe_dt(struct platform_device *pdev)
 	if (!pdata)
 		return -ENOMEM;
 
-	pdata->sck = of_get_named_gpio(np, "gpio-sck", 0);
-	pdata->miso = of_get_named_gpio(np, "gpio-miso", 0);
-	pdata->mosi = of_get_named_gpio(np, "gpio-mosi", 0);
+	ret = of_get_named_gpio(np, "gpio-sck", 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "gpio-sck property not found\n");
+		goto error_free;
+	}
+	pdata->sck = ret;
+
+	ret = of_get_named_gpio(np, "gpio-miso", 0);
+	if (ret < 0) {
+		dev_info(&pdev->dev, "gpio-miso property not found, switching to no-rx mode\n");
+		pdata->miso = SPI_GPIO_NO_MISO;
+	} else
+		pdata->miso = ret;
+
+	ret = of_get_named_gpio(np, "gpio-mosi", 0);
+	if (ret < 0) {
+		dev_info(&pdev->dev, "gpio-mosi property not found, switching to no-tx mode\n");
+		pdata->mosi = SPI_GPIO_NO_MOSI;
+	} else
+		pdata->mosi = ret;
 
 	ret = of_property_read_u32(np, "num-chipselects", &tmp);
 	if (ret < 0) {

drivers/spi/spi-omap2-mcspi.c

@@ -927,6 +927,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 
 	struct spi_device		*spi;
 	struct spi_transfer		*t = NULL;
+	struct spi_master		*master;
 	int				cs_active = 0;
 	struct omap2_mcspi_cs		*cs;
 	struct omap2_mcspi_device_config *cd;
@@ -935,6 +936,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 	u32				chconf;
 
 	spi = m->spi;
+	master = spi->master;
 	cs = spi->controller_state;
 	cd = spi->controller_data;
 
@@ -952,6 +954,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 			if (!t->speed_hz && !t->bits_per_word)
 				par_override = 0;
 		}
+		if (cd && cd->cs_per_word) {
+			chconf = mcspi->ctx.modulctrl;
+			chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
+			mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+			mcspi->ctx.modulctrl =
+				mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+		}
+
 
 		if (!cs_active) {
 			omap2_mcspi_force_cs(spi, 1);
@@ -1013,6 +1023,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 	if (cs_active)
 		omap2_mcspi_force_cs(spi, 0);
 
+	if (cd && cd->cs_per_word) {
+		chconf = mcspi->ctx.modulctrl;
+		chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE;
+		mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+		mcspi->ctx.modulctrl =
+			mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+	}
+
 	omap2_mcspi_set_enable(spi, 0);
 
 	m->status = status;
@@ -1020,7 +1038,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 }
 
 static int omap2_mcspi_transfer_one_message(struct spi_master *master,
-						struct spi_message *m)
+		struct spi_message *m)
 {
 	struct omap2_mcspi	*mcspi;
 	struct spi_transfer	*t;
@@ -1041,7 +1059,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
 				|| (len && !(rx_buf || tx_buf))
 				|| (t->bits_per_word &&
 					(  t->bits_per_word < 4
-					|| t->bits_per_word > 32))) {
+					   || t->bits_per_word > 32))) {
 			dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
 					t->speed_hz,
 					len,
@@ -1052,8 +1070,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
 		}
 		if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) {
 			dev_dbg(mcspi->dev, "speed_hz %d below minimum %d Hz\n",
-				t->speed_hz,
-				OMAP2_MCSPI_MAX_FREQ >> 15);
+					t->speed_hz,
+					OMAP2_MCSPI_MAX_FREQ >> 15);
 			return -EINVAL;
 		}
 
@@ -1099,7 +1117,7 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
 		return ret;
 
 	mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
-				OMAP2_MCSPI_WAKEUPENABLE_WKEN);
+			OMAP2_MCSPI_WAKEUPENABLE_WKEN);
 	ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
 
 	omap2_mcspi_set_master_mode(master);
@@ -1228,7 +1246,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 
 		sprintf(dma_ch_name, "rx%d", i);
 		dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-							dma_ch_name);
+				dma_ch_name);
 		if (!dma_res) {
 			dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
 			status = -ENODEV;
@@ -1238,7 +1256,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 		mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
 		sprintf(dma_ch_name, "tx%d", i);
 		dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-							dma_ch_name);
+				dma_ch_name);
 		if (!dma_res) {
 			dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
 			status = -ENODEV;
@@ -1254,7 +1272,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(pinctrl))
 		dev_warn(&pdev->dev,
-			"pins are not configured from the driver\n");
+				"pins are not configured from the driver\n");
 
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);

drivers/spi/spi-pxa2xx-pci.c

@@ -8,147 +8,58 @@
 #include <linux/module.h>
 #include <linux/spi/pxa2xx_spi.h>
 
-struct ce4100_info {
-	struct ssp_device ssp;
-	struct platform_device *spi_pdev;
-};
-
-static DEFINE_MUTEX(ssp_lock);
-static LIST_HEAD(ssp_list);
-
-struct ssp_device *pxa_ssp_request(int port, const char *label)
-{
-	struct ssp_device *ssp = NULL;
-
-	mutex_lock(&ssp_lock);
-
-	list_for_each_entry(ssp, &ssp_list, node) {
-		if (ssp->port_id == port && ssp->use_count == 0) {
-			ssp->use_count++;
-			ssp->label = label;
-			break;
-		}
-	}
-
-	mutex_unlock(&ssp_lock);
-
-	if (&ssp->node == &ssp_list)
-		return NULL;
-
-	return ssp;
-}
-EXPORT_SYMBOL_GPL(pxa_ssp_request);
-
-void pxa_ssp_free(struct ssp_device *ssp)
-{
-	mutex_lock(&ssp_lock);
-	if (ssp->use_count) {
-		ssp->use_count--;
-		ssp->label = NULL;
-	} else
-		dev_err(&ssp->pdev->dev, "device already free\n");
-	mutex_unlock(&ssp_lock);
-}
-EXPORT_SYMBOL_GPL(pxa_ssp_free);
-
 static int ce4100_spi_probe(struct pci_dev *dev,
 		const struct pci_device_id *ent)
 {
+	struct platform_device_info pi;
 	int ret;
-	resource_size_t phys_beg;
-	resource_size_t phys_len;
-	struct ce4100_info *spi_info;
 	struct platform_device *pdev;
 	struct pxa2xx_spi_master spi_pdata;
 	struct ssp_device *ssp;
 
-	ret = pci_enable_device(dev);
+	ret = pcim_enable_device(dev);
 	if (ret)
 		return ret;
 
-	phys_beg = pci_resource_start(dev, 0);
-	phys_len = pci_resource_len(dev, 0);
-
-	if (!request_mem_region(phys_beg, phys_len,
-				"CE4100 SPI")) {
-		dev_err(&dev->dev, "Can't request register space.\n");
-		ret = -EBUSY;
+	ret = pcim_iomap_regions(dev, 1 << 0, "PXA2xx SPI");
+	if (!ret)
 		return ret;
-	}
 
-	pdev = platform_device_alloc("pxa2xx-spi", dev->devfn);
-	spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL);
-	if (!pdev || !spi_info ) {
-		ret = -ENOMEM;
-		goto err_nomem;
-	}
 	memset(&spi_pdata, 0, sizeof(spi_pdata));
 	spi_pdata.num_chipselect = dev->devfn;
 
-	ret = platform_device_add_data(pdev, &spi_pdata, sizeof(spi_pdata));
-	if (ret)
-		goto err_nomem;
-
-	pdev->dev.parent = &dev->dev;
-	pdev->dev.of_node = dev->dev.of_node;
-	ssp = &spi_info->ssp;
+	ssp = &spi_pdata.ssp;
 	ssp->phys_base = pci_resource_start(dev, 0);
-	ssp->mmio_base = ioremap(phys_beg, phys_len);
+	ssp->mmio_base = pcim_iomap_table(dev)[0];
 	if (!ssp->mmio_base) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -EIO;
-		goto err_nomem;
+		dev_err(&dev->dev, "failed to ioremap() registers\n");
+		return -EIO;
 	}
 	ssp->irq = dev->irq;
-	ssp->port_id = pdev->id;
+	ssp->port_id = dev->devfn;
 	ssp->type = PXA25x_SSP;
 
-	mutex_lock(&ssp_lock);
-	list_add(&ssp->node, &ssp_list);
-	mutex_unlock(&ssp_lock);
+	memset(&pi, 0, sizeof(pi));
+	pi.parent = &dev->dev;
+	pi.name = "pxa2xx-spi";
+	pi.id = ssp->port_id;
+	pi.data = &spi_pdata;
+	pi.size_data = sizeof(spi_pdata);
 
-	pci_set_drvdata(dev, spi_info);
+	pdev = platform_device_register_full(&pi);
+	if (!pdev)
+		return -ENOMEM;
 
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto err_dev_add;
+	pci_set_drvdata(dev, pdev);
 
-	return ret;
-
-err_dev_add:
-	pci_set_drvdata(dev, NULL);
-	mutex_lock(&ssp_lock);
-	list_del(&ssp->node);
-	mutex_unlock(&ssp_lock);
-	iounmap(ssp->mmio_base);
-
-err_nomem:
-	release_mem_region(phys_beg, phys_len);
-	platform_device_put(pdev);
-	kfree(spi_info);
-	return ret;
+	return 0;
 }
 
 static void ce4100_spi_remove(struct pci_dev *dev)
 {
-	struct ce4100_info *spi_info;
-	struct ssp_device *ssp;
-
-	spi_info = pci_get_drvdata(dev);
-	ssp = &spi_info->ssp;
-	platform_device_unregister(spi_info->spi_pdev);
-
-	iounmap(ssp->mmio_base);
-	release_mem_region(pci_resource_start(dev, 0),
-			pci_resource_len(dev, 0));
-
-	mutex_lock(&ssp_lock);
-	list_del(&ssp->node);
-	mutex_unlock(&ssp_lock);
+	struct platform_device *pdev = pci_get_drvdata(dev);
 
-	pci_set_drvdata(dev, NULL);
-	pci_disable_device(dev);
-	kfree(spi_info);
+	platform_device_unregister(pdev);
 }
 
 static DEFINE_PCI_DEVICE_TABLE(ce4100_spi_devices) = {

drivers/spi/spi-pxa2xx.c

@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -47,7 +48,7 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 
 #define DMA_INT_MASK		(DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
 #define RESET_DMA_CHANNEL	(DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x)	((((u32)(x)) & 0x07) == 0)
+#define IS_DMA_ALIGNED(x)	IS_ALIGNED((unsigned long)(x), DMA_ALIGNMENT)
 #define MAX_DMA_LEN		8191
 #define DMA_ALIGNMENT		8
 
@@ -85,9 +86,6 @@ DEFINE_SSP_REG(SSPSP, 0x2c)
 #define DONE_STATE ((void*)2)
 #define ERROR_STATE ((void*)-1)
 
-#define QUEUE_RUNNING 0
-#define QUEUE_STOPPED 1
-
 struct driver_data {
 	/* Driver model hookup */
 	struct platform_device *pdev;
@@ -117,13 +115,8 @@ struct driver_data {
 	u32 clear_sr;
 	u32 mask_sr;
 
-	/* Driver message queue */
-	struct workqueue_struct	*workqueue;
-	struct work_struct pump_messages;
-	spinlock_t lock;
-	struct list_head queue;
-	int busy;
-	int run;
+	/* Maximun clock rate */
+	unsigned long max_clk_rate;
 
 	/* Message Transfer pump */
 	struct tasklet_struct pump_transfers;
@@ -173,8 +166,6 @@ struct chip_data {
 	void (*cs_control)(u32 command);
 };
 
-static void pump_messages(struct work_struct *work);
-
 static void cs_assert(struct driver_data *drv_data)
 {
 	struct chip_data *chip = drv_data->cur_chip;
@@ -444,15 +435,11 @@ static void unmap_dma_buffers(struct driver_data *drv_data)
 static void giveback(struct driver_data *drv_data)
 {
 	struct spi_transfer* last_transfer;
-	unsigned long flags;
 	struct spi_message *msg;
 
-	spin_lock_irqsave(&drv_data->lock, flags);
 	msg = drv_data->cur_msg;
 	drv_data->cur_msg = NULL;
 	drv_data->cur_transfer = NULL;
-	queue_work(drv_data->workqueue, &drv_data->pump_messages);
-	spin_unlock_irqrestore(&drv_data->lock, flags);
 
 	last_transfer = list_entry(msg->transfers.prev,
 					struct spi_transfer,
@@ -481,13 +468,7 @@ static void giveback(struct driver_data *drv_data)
 		 */
 
 		/* get a pointer to the next message, if any */
-		spin_lock_irqsave(&drv_data->lock, flags);
-		if (list_empty(&drv_data->queue))
-			next_msg = NULL;
-		else
-			next_msg = list_entry(drv_data->queue.next,
-					struct spi_message, queue);
-		spin_unlock_irqrestore(&drv_data->lock, flags);
+		next_msg = spi_get_next_queued_message(drv_data->master);
 
 		/* see if the next and current messages point
 		 * to the same chip
@@ -498,10 +479,7 @@ static void giveback(struct driver_data *drv_data)
 			cs_deassert(drv_data);
 	}
 
-	msg->state = NULL;
-	if (msg->complete)
-		msg->complete(msg->context);
-
+	spi_finalize_current_message(drv_data->master);
 	drv_data->cur_chip = NULL;
 }
 
@@ -917,9 +895,12 @@ static int set_dma_burst_and_threshold(struct chip_data *chip,
 	return retval;
 }
 
-static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
+static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 {
-	unsigned long ssp_clk = clk_get_rate(ssp->clk);
+	unsigned long ssp_clk = drv_data->max_clk_rate;
+	const struct ssp_device *ssp = drv_data->ssp;
+
+	rate = min_t(int, ssp_clk, rate);
 
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
 		return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
@@ -934,7 +915,6 @@ static void pump_transfers(unsigned long data)
 	struct spi_transfer *transfer = NULL;
 	struct spi_transfer *previous = NULL;
 	struct chip_data *chip = NULL;
-	struct ssp_device *ssp = drv_data->ssp;
 	void __iomem *reg = drv_data->ioaddr;
 	u32 clk_div = 0;
 	u8 bits = 0;
@@ -1031,7 +1011,7 @@ static void pump_transfers(unsigned long data)
 		if (transfer->bits_per_word)
 			bits = transfer->bits_per_word;
 
-		clk_div = ssp_get_clk_div(ssp, speed);
+		clk_div = ssp_get_clk_div(drv_data, speed);
 
 		if (bits <= 8) {
 			drv_data->n_bytes = 1;
@@ -1176,31 +1156,12 @@ static void pump_transfers(unsigned long data)
 	write_SSCR1(cr1, reg);
 }
 
-static void pump_messages(struct work_struct *work)
+static int pxa2xx_spi_transfer_one_message(struct spi_master *master,
+					   struct spi_message *msg)
 {
-	struct driver_data *drv_data =
-		container_of(work, struct driver_data, pump_messages);
-	unsigned long flags;
-
-	/* Lock queue and check for queue work */
-	spin_lock_irqsave(&drv_data->lock, flags);
-	if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
-		drv_data->busy = 0;
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return;
-	}
-
-	/* Make sure we are not already running a message */
-	if (drv_data->cur_msg) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return;
-	}
-
-	/* Extract head of queue */
-	drv_data->cur_msg = list_entry(drv_data->queue.next,
-					struct spi_message, queue);
-	list_del_init(&drv_data->cur_msg->queue);
+	struct driver_data *drv_data = spi_master_get_devdata(master);
 
+	drv_data->cur_msg = msg;
 	/* Initial message state*/
 	drv_data->cur_msg->state = START_STATE;
 	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
@@ -1213,34 +1174,6 @@ static void pump_messages(struct work_struct *work)
 
 	/* Mark as busy and launch transfers */
 	tasklet_schedule(&drv_data->pump_transfers);
-
-	drv_data->busy = 1;
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-}
-
-static int transfer(struct spi_device *spi, struct spi_message *msg)
-{
-	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-	unsigned long flags;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-
-	if (drv_data->run == QUEUE_STOPPED) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return -ESHUTDOWN;
-	}
-
-	msg->actual_length = 0;
-	msg->status = -EINPROGRESS;
-	msg->state = START_STATE;
-
-	list_add_tail(&msg->queue, &drv_data->queue);
-
-	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
-		queue_work(drv_data->workqueue, &drv_data->pump_messages);
-
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
 	return 0;
 }
 
@@ -1287,7 +1220,6 @@ static int setup(struct spi_device *spi)
 	struct pxa2xx_spi_chip *chip_info = NULL;
 	struct chip_data *chip;
 	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-	struct ssp_device *ssp = drv_data->ssp;
 	unsigned int clk_div;
 	uint tx_thres = TX_THRESH_DFLT;
 	uint rx_thres = RX_THRESH_DFLT;
@@ -1369,7 +1301,7 @@ static int setup(struct spi_device *spi)
 		}
 	}
 
-	clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
+	clk_div = ssp_get_clk_div(drv_data, spi->max_speed_hz);
 	chip->speed_hz = spi->max_speed_hz;
 
 	chip->cr0 = clk_div
@@ -1385,12 +1317,12 @@ static int setup(struct spi_device *spi)
 	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
 	if (!pxa25x_ssp_comp(drv_data))
 		dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
-			clk_get_rate(ssp->clk)
+			drv_data->max_clk_rate
 				/ (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)),
 			chip->enable_dma ? "DMA" : "PIO");
 	else
 		dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
-			clk_get_rate(ssp->clk) / 2
+			drv_data->max_clk_rate / 2
 				/ (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)),
 			chip->enable_dma ? "DMA" : "PIO");
 
@@ -1438,94 +1370,6 @@ static void cleanup(struct spi_device *spi)
 	kfree(chip);
 }
 
-static int init_queue(struct driver_data *drv_data)
-{
-	INIT_LIST_HEAD(&drv_data->queue);
-	spin_lock_init(&drv_data->lock);
-
-	drv_data->run = QUEUE_STOPPED;
-	drv_data->busy = 0;
-
-	tasklet_init(&drv_data->pump_transfers,
-			pump_transfers,	(unsigned long)drv_data);
-
-	INIT_WORK(&drv_data->pump_messages, pump_messages);
-	drv_data->workqueue = create_singlethread_workqueue(
-				dev_name(drv_data->master->dev.parent));
-	if (drv_data->workqueue == NULL)
-		return -EBUSY;
-
-	return 0;
-}
-
-static int start_queue(struct driver_data *drv_data)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-
-	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		return -EBUSY;
-	}
-
-	drv_data->run = QUEUE_RUNNING;
-	drv_data->cur_msg = NULL;
-	drv_data->cur_transfer = NULL;
-	drv_data->cur_chip = NULL;
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	queue_work(drv_data->workqueue, &drv_data->pump_messages);
-
-	return 0;
-}
-
-static int stop_queue(struct driver_data *drv_data)
-{
-	unsigned long flags;
-	unsigned limit = 500;
-	int status = 0;
-
-	spin_lock_irqsave(&drv_data->lock, flags);
-
-	/* This is a bit lame, but is optimized for the common execution path.
-	 * A wait_queue on the drv_data->busy could be used, but then the common
-	 * execution path (pump_messages) would be required to call wake_up or
-	 * friends on every SPI message. Do this instead */
-	drv_data->run = QUEUE_STOPPED;
-	while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
-		spin_unlock_irqrestore(&drv_data->lock, flags);
-		msleep(10);
-		spin_lock_irqsave(&drv_data->lock, flags);
-	}
-
-	if (!list_empty(&drv_data->queue) || drv_data->busy)
-		status = -EBUSY;
-
-	spin_unlock_irqrestore(&drv_data->lock, flags);
-
-	return status;
-}
-
-static int destroy_queue(struct driver_data *drv_data)
-{
-	int status;
-
-	status = stop_queue(drv_data);
-	/* we are unloading the module or failing to load (only two calls
-	 * to this routine), and neither call can handle a return value.
-	 * However, destroy_workqueue calls flush_workqueue, and that will
-	 * block until all work is done.  If the reason that stop_queue
-	 * timed out is that the work will never finish, then it does no
-	 * good to call destroy_workqueue, so return anyway. */
-	if (status != 0)
-		return status;
-
-	destroy_workqueue(drv_data->workqueue);
-
-	return 0;
-}
-
 static int pxa2xx_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1535,11 +1379,18 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	struct ssp_device *ssp;
 	int status;
 
-	platform_info = dev->platform_data;
+	platform_info = dev_get_platdata(dev);
+	if (!platform_info) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -ENODEV;
+	}
 
 	ssp = pxa_ssp_request(pdev->id, pdev->name);
-	if (ssp == NULL) {
-		dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
+	if (!ssp)
+		ssp = &platform_info->ssp;
+
+	if (!ssp->mmio_base) {
+		dev_err(&pdev->dev, "failed to get ssp\n");
 		return -ENODEV;
 	}
 
@@ -1561,16 +1412,15 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
-	master->bus_num = pdev->id;
+	master->bus_num = ssp->port_id;
 	master->num_chipselect = platform_info->num_chipselect;
 	master->dma_alignment = DMA_ALIGNMENT;
 	master->cleanup = cleanup;
 	master->setup = setup;
-	master->transfer = transfer;
+	master->transfer_one_message = pxa2xx_spi_transfer_one_message;
 
 	drv_data->ssp_type = ssp->type;
-	drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
-						sizeof(struct driver_data)), 8);
+	drv_data->null_dma_buf = (u32 *)PTR_ALIGN(&drv_data[1], DMA_ALIGNMENT);
 
 	drv_data->ioaddr = ssp->mmio_base;
 	drv_data->ssdr_physical = ssp->phys_base + SSDR;
@@ -1625,7 +1475,9 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	}
 
 	/* Enable SOC clock */
-	clk_enable(ssp->clk);
+	clk_prepare_enable(ssp->clk);
+
+	drv_data->max_clk_rate = clk_get_rate(ssp->clk);
 
 	/* Load default SSP configuration */
 	write_SSCR0(0, drv_data->ioaddr);
@@ -1640,33 +1492,21 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 		write_SSTO(0, drv_data->ioaddr);
 	write_SSPSP(0, drv_data->ioaddr);
 
-	/* Initial and start queue */
-	status = init_queue(drv_data);
-	if (status != 0) {
-		dev_err(&pdev->dev, "problem initializing queue\n");
-		goto out_error_clock_enabled;
-	}
-	status = start_queue(drv_data);
-	if (status != 0) {
-		dev_err(&pdev->dev, "problem starting queue\n");
-		goto out_error_clock_enabled;
-	}
+	tasklet_init(&drv_data->pump_transfers, pump_transfers,
+		     (unsigned long)drv_data);
 
 	/* Register with the SPI framework */
 	platform_set_drvdata(pdev, drv_data);
 	status = spi_register_master(master);
 	if (status != 0) {
 		dev_err(&pdev->dev, "problem registering spi master\n");
-		goto out_error_queue_alloc;
+		goto out_error_clock_enabled;
 	}
 
 	return status;
 
-out_error_queue_alloc:
-	destroy_queue(drv_data);
-
 out_error_clock_enabled:
-	clk_disable(ssp->clk);
+	clk_disable_unprepare(ssp->clk);
 
 out_error_dma_alloc:
 	if (drv_data->tx_channel != -1)
@@ -1687,29 +1527,14 @@ static int pxa2xx_spi_remove(struct platform_device *pdev)
 {
 	struct driver_data *drv_data = platform_get_drvdata(pdev);
 	struct ssp_device *ssp;
-	int status = 0;
 
 	if (!drv_data)
 		return 0;
 	ssp = drv_data->ssp;
 
-	/* Remove the queue */
-	status = destroy_queue(drv_data);
-	if (status != 0)
-		/* the kernel does not check the return status of this
-		 * this routine (mod->exit, within the kernel).  Therefore
-		 * nothing is gained by returning from here, the module is
-		 * going away regardless, and we should not leave any more
-		 * resources allocated than necessary.  We cannot free the
-		 * message memory in drv_data->queue, but we can release the
-		 * resources below.  I think the kernel should honor -EBUSY
-		 * returns but... */
-		dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not "
-			"complete, message memory not freed\n");
-
 	/* Disable the SSP at the peripheral and SOC level */
 	write_SSCR0(0, drv_data->ioaddr);
-	clk_disable(ssp->clk);
+	clk_disable_unprepare(ssp->clk);
 
 	/* Release DMA */
 	if (drv_data->master_info->enable_dma) {
@@ -1749,11 +1574,11 @@ static int pxa2xx_spi_suspend(struct device *dev)
 	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
-	status = stop_queue(drv_data);
+	status = spi_master_suspend(drv_data->master);
 	if (status != 0)
 		return status;
 	write_SSCR0(0, drv_data->ioaddr);
-	clk_disable(ssp->clk);
+	clk_disable_unprepare(ssp->clk);
 
 	return 0;
 }
@@ -1772,10 +1597,10 @@ static int pxa2xx_spi_resume(struct device *dev)
 			DRCMR_MAPVLD | drv_data->tx_channel;
 
 	/* Enable the SSP clock */
-	clk_enable(ssp->clk);
+	clk_prepare_enable(ssp->clk);
 
 	/* Start the queue running */
-	status = start_queue(drv_data);
+	status = spi_master_resume(drv_data->master);
 	if (status != 0) {
 		dev_err(dev, "problem starting queue (%d)\n", status);
 		return status;

drivers/spi/spi-s3c64xx.c

@@ -957,6 +957,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
 		if (spi->max_speed_hz >= speed) {
 			spi->max_speed_hz = speed;
 		} else {
+			dev_err(&spi->dev, "Can't set %dHz transfer speed\n",
+				spi->max_speed_hz);
 			err = -EINVAL;
 			goto setup_exit;
 		}

include/linux/platform_data/spi-omap2-mcspi.h

@@ -22,6 +22,9 @@ struct omap2_mcspi_dev_attr {
 
 struct omap2_mcspi_device_config {
 	unsigned turbo_mode:1;
+
+	/* toggle chip select after every word */
+	unsigned cs_per_word:1;
 };
 
 #endif

include/linux/pxa2xx_ssp.h

@@ -206,6 +206,15 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
 	return __raw_readl(dev->mmio_base + reg);
 }
 
+#ifdef CONFIG_ARCH_PXA
 struct ssp_device *pxa_ssp_request(int port, const char *label);
 void pxa_ssp_free(struct ssp_device *);
+#else
+static inline struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+	return NULL;
+}
+static inline void pxa_ssp_free(struct ssp_device *ssp) {}
+#endif
+
 #endif

include/linux/spi/pxa2xx_spi.h

@@ -28,6 +28,9 @@ struct pxa2xx_spi_master {
 	u32 clock_enable;
 	u16 num_chipselect;
 	u8 enable_dma;
+
+	/* For non-PXA arches */
+	struct ssp_device ssp;
 };
 
 /* spi_board_info.controller_data for SPI slave devices,
@@ -130,23 +133,5 @@ static inline void pxa_free_dma(int dma_ch)
 {
 }
 
-/*
- * The CE4100 does not have the clk framework implemented and SPI clock can
- * not be switched on/off or the divider changed.
- */
-static inline void clk_disable(struct clk *clk)
-{
-}
-
-static inline int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static inline unsigned long clk_get_rate(struct clk *clk)
-{
-	return 3686400;
-}
-
 #endif
 #endif

include/linux/spi/spi_gpio.h

@@ -62,8 +62,8 @@
  */
 struct spi_gpio_platform_data {
 	unsigned	sck;
-	unsigned	mosi;
-	unsigned	miso;
+	unsigned long	mosi;
+	unsigned long	miso;
 
 	u16		num_chipselect;
 };