Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "A big update to the Atmel touchscreen driver, devm support for polled
  input devices, several drivers have been converted to using managed
  resources, and assorted driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
  Input: synaptics - fix resolution for manually provided min/max
  Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_version
  Input: max8997_haptic - add error handling for regulator and pwm
  Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set
  Input: elantech - deal with clickpads reporting right button events
  Input: edt-ft5x06 - fix an i2c write for M09 support
  Input: omap-keypad - remove platform data support
  ARM: OMAP2+: remove unused omap4-keypad file and code
  Input: ab8500-ponkey - switch to using managed resources
  Input: max8925_onkey - switch to using managed resources
  Input: 88pm860x-ts - switch to using managed resources
  Input: 88pm860x_onkey - switch to using managed resources
  Input: intel-mid-touch - switch to using managed resources
  Input: wacom - process outbound for newer Cintiqs
  Input: wacom - set stylus_in_proximity when pen is in range
  DTS: ARM: OMAP3-N900: Add tsc2005 support
  Input: tsc2005 - add DT support
  Input: add common DT binding for touchscreens
  Input: jornada680_kbd - switch top using managed resources
  Input: adp5520-keys - switch to using managed resources
  ...

Documentation/devicetree/bindings/input/st-keyscan.txt

+* ST Keyscan controller Device Tree bindings
+
+The ST keyscan controller Device Tree binding is based on the
+matrix-keymap.
+
+Required properties:
+- compatible: "st,sti-keyscan"
+
+- reg: Register base address and size of st-keyscan controller.
+
+- interrupts: Interrupt number for the st-keyscan controller.
+
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+
+- pinctrl: Should specify pin control groups used for this controller.
+  See ../pinctrl/pinctrl-bindings.txt for details.
+
+- linux,keymap: The keymap for keys as described in the binding document
+  devicetree/bindings/input/matrix-keymap.txt.
+
+- keypad,num-rows: Number of row lines connected to the keypad controller.
+
+- keypad,num-columns: Number of column lines connected to the keypad
+  controller.
+
+Optional property:
+- st,debounce_us: Debouncing interval time in microseconds
+
+Example:
+
+keyscan: keyscan@fe4b0000 {
+	compatible = "st,sti-keyscan";
+	reg = <0xfe4b0000 0x2000>;
+	interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+	clocks	= <&CLK_SYSIN>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_keyscan>;
+
+	keypad,num-rows = <4>;
+	keypad,num-columns = <4>;
+	st,debounce_us = <5000>;
+
+	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
+			 MATRIX_KEY(0x00, 0x01, KEY_F9)
+			 MATRIX_KEY(0x00, 0x02, KEY_F5)
+			 MATRIX_KEY(0x00, 0x03, KEY_F1)
+			 MATRIX_KEY(0x01, 0x00, KEY_F14)
+			 MATRIX_KEY(0x01, 0x01, KEY_F10)
+			 MATRIX_KEY(0x01, 0x02, KEY_F6)
+			 MATRIX_KEY(0x01, 0x03, KEY_F2)
+			 MATRIX_KEY(0x02, 0x00, KEY_F15)
+			 MATRIX_KEY(0x02, 0x01, KEY_F11)
+			 MATRIX_KEY(0x02, 0x02, KEY_F7)
+			 MATRIX_KEY(0x02, 0x03, KEY_F3)
+			 MATRIX_KEY(0x03, 0x00, KEY_F16)
+			 MATRIX_KEY(0x03, 0x01, KEY_F12)
+			 MATRIX_KEY(0x03, 0x02, KEY_F8)
+			 MATRIX_KEY(0x03, 0x03, KEY_F4) >;
+	};

Documentation/devicetree/bindings/input/touchscreen/sun4i.txt

+sun4i resistive touchscreen controller
+--------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-ts"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+
+Optional properties:
+ - allwinner,ts-attached: boolean indicating that an actual touchscreen is
+			  attached to the controller
+
+Example:
+
+	rtp: rtp@01c25000 {
+		compatible = "allwinner,sun4i-a10-ts";
+		reg = <0x01c25000 0x100>;
+		interrupts = <29>;
+		allwinner,ts-attached;
+	};

Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt

+General Touchscreen Properties:
+
+Optional properties for Touchscreens:
+ - touchscreen-size-x		: horizontal resolution of touchscreen
+				  (in pixels)
+ - touchscreen-size-y		: vertical resolution of touchscreen
+				  (in pixels)
+ - touchscreen-max-pressure	: maximum reported pressure (arbitrary range
+				  dependent on the controller)
+ - touchscreen-fuzz-x		: horizontal noise value of the absolute input
+				  device (in pixels)
+ - touchscreen-fuzz-y		: vertical noise value of the absolute input
+				  device (in pixels)
+ - touchscreen-fuzz-pressure	: pressure noise value of the absolute input
+				  device (arbitrary range dependent on the
+				  controller)
+ - touchscreen-inverted-x	: X axis is inverted (boolean)
+ - touchscreen-inverted-y	: Y axis is inverted (boolean)
+
+Deprecated properties for Touchscreens:
+ - x-size			: deprecated name for touchscreen-size-x
+ - y-size			: deprecated name for touchscreen-size-y
+ - moving-threshold		: deprecated name for a combination of
+				  touchscreen-fuzz-x and touchscreen-fuzz-y
+ - contact-threshold		: deprecated name for touchscreen-fuzz-pressure
+ - x-invert			: deprecated name for touchscreen-inverted-x
+ - y-invert			: deprecated name for touchscreen-inverted-y

Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt

+* Texas Instruments tsc2005 touchscreen controller
+
+Required properties:
+ - compatible		      : "ti,tsc2005"
+ - reg			      : SPI device address
+ - spi-max-frequency	      : Maximal SPI speed
+ - interrupts		      : IRQ specifier
+ - reset-gpios		      : GPIO specifier
+ - vio-supply                 : Regulator specifier
+
+Optional properties:
+ - ti,x-plate-ohms	      : integer, resistance of the touchscreen's X plates
+				in ohm (defaults to 280)
+ - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
+				the configured time (in milli seconds), the driver
+				will reset it. This is disabled by default.
+ - properties defined in touchscreen.txt
+
+Example:
+
+&mcspi1 {
+	tsc2005@0 {
+		compatible = "ti,tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-max-x = <4096>;
+		touchscreen-max-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+}

arch/arm/boot/dts/omap3-n900.dts

@@ -651,9 +651,24 @@ &mcspi1 {
 	 * Also... order in the device tree actually matters here.
 	 */
 	tsc2005@0 {
-		compatible = "tsc2005";
+		compatible = "ti,tsc2005";
 		spi-max-frequency = <6000000>;
 		reg = <0>;
+
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-max-x = <4096>;
+		touchscreen-max-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
 	};
 
 	acx565akm@2 {

arch/arm/mach-omap2/devices.c

@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/platform_data/omap4-keypad.h>
 #include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
@@ -29,7 +28,6 @@
 #include "iomap.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
-#include "omap4-keypad.h"
 
 #include "soc.h"
 #include "common.h"
@@ -255,37 +253,6 @@ static inline void omap_init_camera(void)
 #endif
 }
 
-int __init omap4_keyboard_init(struct omap4_keypad_platform_data
-			*sdp4430_keypad_data, struct omap_board_data *bdata)
-{
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	struct omap4_keypad_platform_data *keypad_data;
-	unsigned int id = -1;
-	char *oh_name = "kbd";
-	char *name = "omap4-keypad";
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		return -ENODEV;
-	}
-
-	keypad_data = sdp4430_keypad_data;
-
-	pdev = omap_device_build(name, id, oh, keypad_data,
-				 sizeof(struct omap4_keypad_platform_data));
-
-	if (IS_ERR(pdev)) {
-		WARN(1, "Can't build omap_device for %s:%s.\n",
-						name, oh->name);
-		return PTR_ERR(pdev);
-	}
-	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
-
-	return 0;
-}
-
 #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
 static inline void __init omap_init_mbox(void)
 {

arch/arm/mach-omap2/omap4-keypad.h

-#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-
-struct omap_board_data;
-
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
-				struct omap_board_data *);
-#endif

arch/arm/mach-s5pv210/mach-goni.c

@@ -234,14 +234,6 @@ static void __init goni_radio_init(void)
 
 /* TSP */
 static struct mxt_platform_data qt602240_platform_data = {
-	.x_line		= 17,
-	.y_line		= 11,
-	.x_size		= 800,
-	.y_size		= 480,
-	.blen		= 0x21,
-	.threshold	= 0x28,
-	.voltage	= 2800000,              /* 2.8V */
-	.orient		= MXT_DIAGONAL,
 	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 

drivers/input/evdev.c

@@ -629,12 +629,10 @@ static int str_to_user(const char *str, unsigned int maxlen, void __user *p)
 	return copy_to_user(p, str, len) ? -EFAULT : len;
 }
 
-#define OLD_KEY_MAX	0x1ff
 static int handle_eviocgbit(struct input_dev *dev,
 			    unsigned int type, unsigned int size,
 			    void __user *p, int compat_mode)
 {
-	static unsigned long keymax_warn_time;
 	unsigned long *bits;
 	int len;
 
@@ -652,24 +650,8 @@ static int handle_eviocgbit(struct input_dev *dev,
 	default: return -EINVAL;
 	}
 
-	/*
-	 * Work around bugs in userspace programs that like to do
-	 * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
-	 * should be in bytes, not in bits.
-	 */
-	if (type == EV_KEY && size == OLD_KEY_MAX) {
-		len = OLD_KEY_MAX;
-		if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
-			pr_warning("(EVIOCGBIT): Suspicious buffer size %u, "
-				   "limiting output to %zu bytes. See "
-				   "http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
-				   OLD_KEY_MAX,
-				   BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
-	}
-
 	return bits_to_user(bits, len, size, p, compat_mode);
 }
-#undef OLD_KEY_MAX
 
 static int evdev_handle_get_keycode(struct input_dev *dev, void __user *p)
 {

drivers/input/input-polldev.c

@@ -147,6 +147,11 @@ static struct attribute_group input_polldev_attribute_group = {
 	.attrs = sysfs_attrs
 };
 
+static const struct attribute_group *input_polldev_attribute_groups[] = {
+	&input_polldev_attribute_group,
+	NULL
+};
+
 /**
  * input_allocate_polled_device - allocate memory for polled device
  *
@@ -171,6 +176,91 @@ struct input_polled_dev *input_allocate_polled_device(void)
 }
 EXPORT_SYMBOL(input_allocate_polled_device);
 
+struct input_polled_devres {
+	struct input_polled_dev *polldev;
+};
+
+static int devm_input_polldev_match(struct device *dev, void *res, void *data)
+{
+	struct input_polled_devres *devres = res;
+
+	return devres->polldev == data;
+}
+
+static void devm_input_polldev_release(struct device *dev, void *res)
+{
+	struct input_polled_devres *devres = res;
+	struct input_polled_dev *polldev = devres->polldev;
+
+	dev_dbg(dev, "%s: dropping reference/freeing %s\n",
+		__func__, dev_name(&polldev->input->dev));
+
+	input_put_device(polldev->input);
+	kfree(polldev);
+}
+
+static void devm_input_polldev_unregister(struct device *dev, void *res)
+{
+	struct input_polled_devres *devres = res;
+	struct input_polled_dev *polldev = devres->polldev;
+
+	dev_dbg(dev, "%s: unregistering device %s\n",
+		__func__, dev_name(&polldev->input->dev));
+	input_unregister_device(polldev->input);
+
+	/*
+	 * Note that we are still holding extra reference to the input
+	 * device so it will stick around until devm_input_polldev_release()
+	 * is called.
+	 */
+}
+
+/**
+ * devm_input_allocate_polled_device - allocate managed polled device
+ * @dev: device owning the polled device being created
+ *
+ * Returns prepared &struct input_polled_dev or %NULL.
+ *
+ * Managed polled input devices do not need to be explicitly unregistered
+ * or freed as it will be done automatically when owner device unbinds
+ * from * its driver (or binding fails). Once such managed polled device
+ * is allocated, it is ready to be set up and registered in the same
+ * fashion as regular polled input devices (using
+ * input_register_polled_device() function).
+ *
+ * If you want to manually unregister and free such managed polled devices,
+ * it can be still done by calling input_unregister_polled_device() and
+ * input_free_polled_device(), although it is rarely needed.
+ *
+ * NOTE: the owner device is set up as parent of input device and users
+ * should not override it.
+ */
+struct input_polled_dev *devm_input_allocate_polled_device(struct device *dev)
+{
+	struct input_polled_dev *polldev;
+	struct input_polled_devres *devres;
+
+	devres = devres_alloc(devm_input_polldev_release, sizeof(*devres),
+			      GFP_KERNEL);
+	if (!devres)
+		return NULL;
+
+	polldev = input_allocate_polled_device();
+	if (!polldev) {
+		devres_free(devres);
+		return NULL;
+	}
+
+	polldev->input->dev.parent = dev;
+	polldev->devres_managed = true;
+
+	devres->polldev = polldev;
+	devres_add(dev, devres);
+
+	return polldev;
+}
+EXPORT_SYMBOL(devm_input_allocate_polled_device);
+
 /**
  * input_free_polled_device - free memory allocated for polled device
  * @dev: device to free
@@ -181,7 +271,12 @@ EXPORT_SYMBOL(input_allocate_polled_device);
 void input_free_polled_device(struct input_polled_dev *dev)
 {
 	if (dev) {
-		input_free_device(dev->input);
+		if (dev->devres_managed)
+			WARN_ON(devres_destroy(dev->input->dev.parent,
+						devm_input_polldev_release,
+						devm_input_polldev_match,
+						dev));
+		input_put_device(dev->input);
 		kfree(dev);
 	}
 }
@@ -199,26 +294,35 @@ EXPORT_SYMBOL(input_free_polled_device);
  */
 int input_register_polled_device(struct input_polled_dev *dev)
 {
+	struct input_polled_devres *devres = NULL;
 	struct input_dev *input = dev->input;
 	int error;
 
+	if (dev->devres_managed) {
+		devres = devres_alloc(devm_input_polldev_unregister,
+				      sizeof(*devres), GFP_KERNEL);
+		if (!devres)
+			return -ENOMEM;
+
+		devres->polldev = dev;
+	}
+
 	input_set_drvdata(input, dev);
 	INIT_DELAYED_WORK(&dev->work, input_polled_device_work);
+
 	if (!dev->poll_interval)
 		dev->poll_interval = 500;
 	if (!dev->poll_interval_max)
 		dev->poll_interval_max = dev->poll_interval;
+
 	input->open = input_open_polled_device;
 	input->close = input_close_polled_device;
 
-	error = input_register_device(input);
-	if (error)
-		return error;
+	input->dev.groups = input_polldev_attribute_groups;
 
-	error = sysfs_create_group(&input->dev.kobj,
-				   &input_polldev_attribute_group);
+	error = input_register_device(input);
 	if (error) {
-		input_unregister_device(input);
+		devres_free(devres);
 		return error;
 	}
 
@@ -231,6 +335,12 @@ int input_register_polled_device(struct input_polled_dev *dev)
 	 */
 	input_get_device(input);
 
+	if (dev->devres_managed) {
+		dev_dbg(input->dev.parent, "%s: registering %s with devres.\n",
+			__func__, dev_name(&input->dev));
+		devres_add(input->dev.parent, devres);
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL(input_register_polled_device);
@@ -245,8 +355,11 @@ EXPORT_SYMBOL(input_register_polled_device);
  */
 void input_unregister_polled_device(struct input_polled_dev *dev)
 {
-	sysfs_remove_group(&dev->input->dev.kobj,
-			   &input_polldev_attribute_group);
+	if (dev->devres_managed)
+		WARN_ON(devres_destroy(dev->input->dev.parent,
+					devm_input_polldev_unregister,
+					devm_input_polldev_match,
+					dev));
 
 	input_unregister_device(dev->input);
 }

drivers/input/keyboard/Kconfig

@@ -524,6 +524,17 @@ config KEYBOARD_STOWAWAY
 	  To compile this driver as a module, choose M here: the
 	  module will be called stowaway.
 
+config KEYBOARD_ST_KEYSCAN
+	tristate "STMicroelectronics keyscan support"
+	depends on ARCH_STI || COMPILE_TEST
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use a keypad attached to the keyscan block
+	  on some STMicroelectronics SoC devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called st-keyscan.
+
 config KEYBOARD_SUNKBD
 	tristate "Sun Type 4 and Type 5 keyboard"
 	select SERIO
@@ -578,7 +589,7 @@ config KEYBOARD_OMAP
 
 config KEYBOARD_OMAP4
 	tristate "TI OMAP4+ keypad support"
-	depends on ARCH_OMAP2PLUS
+	depends on OF || ARCH_OMAP2PLUS
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the OMAP4+ keypad.

drivers/input/keyboard/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
 obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
+obj-$(CONFIG_KEYBOARD_ST_KEYSCAN)	+= st-keyscan.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
 obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
 obj-$(CONFIG_KEYBOARD_TEGRA)		+= tegra-kbc.o

drivers/input/keyboard/adp5520-keys.c

@@ -12,6 +12,7 @@
 #include <linux/input.h>
 #include <linux/mfd/adp5520.h>
 #include <linux/slab.h>
+#include <linux/device.h>
 
 struct adp5520_keys {
 	struct input_dev *input;
@@ -81,7 +82,7 @@ static int adp5520_keys_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (pdata == NULL) {
+	if (!pdata) {
 		dev_err(&pdev->dev, "missing platform data\n");
 		return -EINVAL;
 	}
@@ -89,17 +90,15 @@ static int adp5520_keys_probe(struct platform_device *pdev)
 	if (!(pdata->rows_en_mask && pdata->cols_en_mask))
 		return -EINVAL;
 
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (dev == NULL) {
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
 		dev_err(&pdev->dev, "failed to alloc memory\n");
 		return -ENOMEM;
 	}
 
-	input = input_allocate_device();
-	if (!input) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
 
 	dev->master = pdev->dev.parent;
 	dev->input = input;
@@ -135,7 +134,7 @@ static int adp5520_keys_probe(struct platform_device *pdev)
 	ret = input_register_device(input);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to register input device\n");
-		goto err;
+		return ret;
 	}
 
 	en_mask = pdata->rows_en_mask | pdata->cols_en_mask;
@@ -157,8 +156,7 @@ static int adp5520_keys_probe(struct platform_device *pdev)
 
 	if (ret) {
 		dev_err(&pdev->dev, "failed to write\n");
-		ret = -EIO;
-		goto err1;
+		return -EIO;
 	}
 
 	dev->notifier.notifier_call = adp5520_keys_notifier;
@@ -166,19 +164,11 @@ static int adp5520_keys_probe(struct platform_device *pdev)
 			ADP5520_KP_IEN | ADP5520_KR_IEN);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register notifier\n");
-		goto err1;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, dev);
 	return 0;
-
-err1:
-	input_unregister_device(input);
-	input = NULL;
-err:
-	input_free_device(input);
-	kfree(dev);
-	return ret;
 }
 
 static int adp5520_keys_remove(struct platform_device *pdev)
@@ -188,8 +178,6 @@ static int adp5520_keys_remove(struct platform_device *pdev)
 	adp5520_unregister_notifier(dev->master, &dev->notifier,
 				ADP5520_KP_IEN | ADP5520_KR_IEN);
 
-	input_unregister_device(dev->input);
-	kfree(dev);
 	return 0;
 }
 

drivers/input/keyboard/clps711x-keypad.c

@@ -185,7 +185,7 @@ static int clps711x_keypad_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id clps711x_keypad_of_match[] = {
+static const struct of_device_id clps711x_keypad_of_match[] = {
 	{ .compatible = "cirrus,clps711x-keypad", },
 	{ }
 };

drivers/input/keyboard/gpio_keys.c

@@ -424,6 +424,16 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void gpio_keys_quiesce_key(void *data)
+{
+	struct gpio_button_data *bdata = data;
+
+	if (bdata->timer_debounce)
+		del_timer_sync(&bdata->timer);
+
+	cancel_work_sync(&bdata->work);
+}
+
 static int gpio_keys_setup_key(struct platform_device *pdev,
 				struct input_dev *input,
 				struct gpio_button_data *bdata,
@@ -433,7 +443,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 	struct device *dev = &pdev->dev;
 	irq_handler_t isr;
 	unsigned long irqflags;
-	int irq, error;
+	int irq;
+	int error;
 
 	bdata->input = input;
 	bdata->button = button;
@@ -441,7 +452,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 
 	if (gpio_is_valid(button->gpio)) {
 
-		error = gpio_request_one(button->gpio, GPIOF_IN, desc);
+		error = devm_gpio_request_one(&pdev->dev, button->gpio,
+					      GPIOF_IN, desc);
 		if (error < 0) {
 			dev_err(dev, "Failed to request GPIO %d, error %d\n",
 				button->gpio, error);
@@ -463,7 +475,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 			dev_err(dev,
 				"Unable to get irq number for GPIO %d, error %d\n",
 				button->gpio, error);
-			goto fail;
+			return error;
 		}
 		bdata->irq = irq;
 
@@ -496,6 +508,18 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 
 	input_set_capability(input, button->type ?: EV_KEY, button->code);
 
+	/*
+	 * Install custom action to cancel debounce timer and
+	 * workqueue item.
+	 */
+	error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata);
+	if (error) {
+		dev_err(&pdev->dev,
+			"failed to register quiesce action, error: %d\n",
+			error);
+		return error;
+	}
+
 	/*
 	 * If platform has specified that the button can be disabled,
 	 * we don't want it to share the interrupt line.
@@ -503,20 +527,15 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 	if (!button->can_disable)
 		irqflags |= IRQF_SHARED;
 
-	error = request_any_context_irq(bdata->irq, isr, irqflags, desc, bdata);
+	error = devm_request_any_context_irq(&pdev->dev, bdata->irq,
+					     isr, irqflags, desc, bdata);
 	if (error < 0) {
 		dev_err(dev, "Unable to claim irq %d; error %d\n",
 			bdata->irq, error);
-		goto fail;
+		return error;
 	}
 
 	return 0;
-
-fail:
-	if (gpio_is_valid(button->gpio))
-		gpio_free(button->gpio);
-
-	return error;
 }
 
 static void gpio_keys_report_state(struct gpio_keys_drvdata *ddata)
@@ -578,23 +597,18 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 	int i;
 
 	node = dev->of_node;
-	if (!node) {
-		error = -ENODEV;
-		goto err_out;
-	}
+	if (!node)
+		return ERR_PTR(-ENODEV);
 
 	nbuttons = of_get_child_count(node);
-	if (nbuttons == 0) {
-		error = -ENODEV;
-		goto err_out;
-	}
+	if (nbuttons == 0)
+		return ERR_PTR(-ENODEV);
 
-	pdata = kzalloc(sizeof(*pdata) + nbuttons * (sizeof *button),
-			GFP_KERNEL);
-	if (!pdata) {
-		error = -ENOMEM;
-		goto err_out;
-	}
+	pdata = devm_kzalloc(dev,
+			     sizeof(*pdata) + nbuttons * sizeof(*button),
+			     GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
 
 	pdata->buttons = (struct gpio_keys_button *)(pdata + 1);
 	pdata->nbuttons = nbuttons;
@@ -619,7 +633,7 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 				dev_err(dev,
 					"Failed to get gpio flags, error: %d\n",
 					error);
-			goto err_free_pdata;
+			return ERR_PTR(error);
 		}
 
 		button = &pdata->buttons[i++];
@@ -630,8 +644,7 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
 			dev_err(dev, "Button without keycode: 0x%x\n",
 				button->gpio);
-			error = -EINVAL;
-			goto err_free_pdata;
+			return ERR_PTR(-EINVAL);
 		}
 
 		button->desc = of_get_property(pp, "label", NULL);
@@ -646,20 +659,13 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 			button->debounce_interval = 5;
 	}
 
-	if (pdata->nbuttons == 0) {
-		error = -EINVAL;
-		goto err_free_pdata;
-	}
+	if (pdata->nbuttons == 0)
+		return ERR_PTR(-EINVAL);
 
 	return pdata;
-
-err_free_pdata:
-	kfree(pdata);
-err_out:
-	return ERR_PTR(error);
 }
 
-static struct of_device_id gpio_keys_of_match[] = {
+static const struct of_device_id gpio_keys_of_match[] = {
 	{ .compatible = "gpio-keys", },
 	{ },
 };
@@ -675,22 +681,13 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 #endif
 
-static void gpio_remove_key(struct gpio_button_data *bdata)
-{
-	free_irq(bdata->irq, bdata);
-	if (bdata->timer_debounce)
-		del_timer_sync(&bdata->timer);
-	cancel_work_sync(&bdata->work);
-	if (gpio_is_valid(bdata->button->gpio))
-		gpio_free(bdata->button->gpio);
-}
-
 static int gpio_keys_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev);
 	struct gpio_keys_drvdata *ddata;
 	struct input_dev *input;
+	size_t size;
 	int i, error;
 	int wakeup = 0;
 
@@ -700,14 +697,18 @@ static int gpio_keys_probe(struct platform_device *pdev)
 			return PTR_ERR(pdata);
 	}
 
-	ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
-			pdata->nbuttons * sizeof(struct gpio_button_data),
-			GFP_KERNEL);
-	input = input_allocate_device();
-	if (!ddata || !input) {
+	size = sizeof(struct gpio_keys_drvdata) +
+			pdata->nbuttons * sizeof(struct gpio_button_data);
+	ddata = devm_kzalloc(dev, size, GFP_KERNEL);
+	if (!ddata) {
 		dev_err(dev, "failed to allocate state\n");
-		error = -ENOMEM;
-		goto fail1;
+		return -ENOMEM;
+	}
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "failed to allocate input device\n");
+		return -ENOMEM;
 	}
 
 	ddata->pdata = pdata;
@@ -738,7 +739,7 @@ static int gpio_keys_probe(struct platform_device *pdev)
 
 		error = gpio_keys_setup_key(pdev, input, bdata, button);
 		if (error)
-			goto fail2;
+			return error;
 
 		if (button->wakeup)
 			wakeup = 1;
@@ -748,57 +749,31 @@ static int gpio_keys_probe(struct platform_device *pdev)
 	if (error) {
 		dev_err(dev, "Unable to export keys/switches, error: %d\n",
 			error);
-		goto fail2;
+		return error;
 	}
 
 	error = input_register_device(input);
 	if (error) {
 		dev_err(dev, "Unable to register input device, error: %d\n",
 			error);
-		goto fail3;
+		goto err_remove_group;
 	}
 
 	device_init_wakeup(&pdev->dev, wakeup);
 
 	return 0;
 
- fail3:
+err_remove_group:
 	sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
- fail2:
-	while (--i >= 0)
-		gpio_remove_key(&ddata->data[i]);
-
- fail1:
-	input_free_device(input);
-	kfree(ddata);
-	/* If we have no platform data, we allocated pdata dynamically. */
-	if (!dev_get_platdata(&pdev->dev))
-		kfree(pdata);
-
 	return error;
 }
 
 static int gpio_keys_remove(struct platform_device *pdev)
 {
-	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
-	struct input_dev *input = ddata->input;
-	int i;
-
 	sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	for (i = 0; i < ddata->pdata->nbuttons; i++)
-		gpio_remove_key(&ddata->data[i]);
-
-	input_unregister_device(input);
-
-	/* If we have no platform data, we allocated pdata dynamically. */
-	if (!dev_get_platdata(&pdev->dev))
-		kfree(ddata->pdata);
-
-	kfree(ddata);
-
 	return 0;
 }
 

drivers/input/keyboard/gpio_keys_polled.c

@@ -120,12 +120,10 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 	if (nbuttons == 0)
 		return NULL;
 
-	pdata = kzalloc(sizeof(*pdata) + nbuttons * (sizeof *button),
-			GFP_KERNEL);
-	if (!pdata) {
-		error = -ENOMEM;
-		goto err_out;
-	}
+	pdata = devm_kzalloc(dev, sizeof(*pdata) + nbuttons * sizeof(*button),
+			     GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
 
 	pdata->buttons = (struct gpio_keys_button *)(pdata + 1);
 	pdata->nbuttons = nbuttons;
@@ -151,7 +149,7 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 				dev_err(dev,
 					"Failed to get gpio flags, error: %d\n",
 					error);
-			goto err_free_pdata;
+			return ERR_PTR(error);
 		}
 
 		button = &pdata->buttons[i++];
@@ -162,8 +160,7 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
 			dev_err(dev, "Button without keycode: 0x%x\n",
 				button->gpio);
-			error = -EINVAL;
-			goto err_free_pdata;
+			return ERR_PTR(-EINVAL);
 		}
 
 		button->desc = of_get_property(pp, "label", NULL);
@@ -178,20 +175,13 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 			button->debounce_interval = 5;
 	}
 
-	if (pdata->nbuttons == 0) {
-		error = -EINVAL;
-		goto err_free_pdata;
-	}
+	if (pdata->nbuttons == 0)
+		return ERR_PTR(-EINVAL);
 
 	return pdata;
-
-err_free_pdata:
-	kfree(pdata);
-err_out:
-	return ERR_PTR(error);
 }
 
-static struct of_device_id gpio_keys_polled_of_match[] = {
+static const struct of_device_id gpio_keys_polled_of_match[] = {
 	{ .compatible = "gpio-keys-polled", },
 	{ },
 };
@@ -213,6 +203,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 	struct gpio_keys_polled_dev *bdev;
 	struct input_polled_dev *poll_dev;
 	struct input_dev *input;
+	size_t size;
 	int error;
 	int i;
 
@@ -228,24 +219,21 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 	if (!pdata->poll_interval) {
 		dev_err(dev, "missing poll_interval value\n");
-		error = -EINVAL;
-		goto err_free_pdata;
+		return -EINVAL;
 	}
 
-	bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) +
-		       pdata->nbuttons * sizeof(struct gpio_keys_button_data),
-		       GFP_KERNEL);
+	size = sizeof(struct gpio_keys_polled_dev) +
+			pdata->nbuttons * sizeof(struct gpio_keys_button_data);
+	bdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
 	if (!bdev) {
 		dev_err(dev, "no memory for private data\n");
-		error = -ENOMEM;
-		goto err_free_pdata;
+		return -ENOMEM;
 	}
 
-	poll_dev = input_allocate_polled_device();
+	poll_dev = devm_input_allocate_polled_device(&pdev->dev);
 	if (!poll_dev) {
 		dev_err(dev, "no memory for polled device\n");
-		error = -ENOMEM;
-		goto err_free_bdev;
+		return -ENOMEM;
 	}
 
 	poll_dev->private = bdev;
@@ -258,7 +246,6 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 	input->name = pdev->name;
 	input->phys = DRV_NAME"/input0";
-	input->dev.parent = &pdev->dev;
 
 	input->id.bustype = BUS_HOST;
 	input->id.vendor = 0x0001;
@@ -277,16 +264,15 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 		if (button->wakeup) {
 			dev_err(dev, DRV_NAME " does not support wakeup\n");
-			error = -EINVAL;
-			goto err_free_gpio;
+			return -EINVAL;
 		}
 
-		error = gpio_request_one(gpio, GPIOF_IN,
-					 button->desc ?: DRV_NAME);
+		error = devm_gpio_request_one(&pdev->dev, gpio, GPIOF_IN,
+					      button->desc ? : DRV_NAME);
 		if (error) {
 			dev_err(dev, "unable to claim gpio %u, err=%d\n",
 				gpio, error);
-			goto err_free_gpio;
+			return error;
 		}
 
 		bdata->can_sleep = gpio_cansleep(gpio);
@@ -306,7 +292,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 	if (error) {
 		dev_err(dev, "unable to register polled device, err=%d\n",
 			error);
-		goto err_free_gpio;
+		return error;
 	}
 
 	/* report initial state of the buttons */
@@ -315,52 +301,10 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 					     &bdev->data[i]);
 
 	return 0;
-
-err_free_gpio:
-	while (--i >= 0)
-		gpio_free(pdata->buttons[i].gpio);
-
-	input_free_polled_device(poll_dev);
-
-err_free_bdev:
-	kfree(bdev);
-
-err_free_pdata:
-	/* If we have no platform_data, we allocated pdata dynamically.  */
-	if (!dev_get_platdata(&pdev->dev))
-		kfree(pdata);
-
-	return error;
-}
-
-static int gpio_keys_polled_remove(struct platform_device *pdev)
-{
-	struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev);
-	const struct gpio_keys_platform_data *pdata = bdev->pdata;
-	int i;
-
-	input_unregister_polled_device(bdev->poll_dev);
-
-	for (i = 0; i < pdata->nbuttons; i++)
-		gpio_free(pdata->buttons[i].gpio);
-
-	input_free_polled_device(bdev->poll_dev);
-
-	/*
-	 * If we had no platform_data, we allocated pdata dynamically and
-	 * must free it here.
-	 */
-	if (!dev_get_platdata(&pdev->dev))
-		kfree(pdata);
-
-	kfree(bdev);
-
-	return 0;
 }
 
 static struct platform_driver gpio_keys_polled_driver = {
 	.probe	= gpio_keys_polled_probe,
-	.remove	= gpio_keys_polled_remove,
 	.driver	= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,

drivers/input/keyboard/imx_keypad.c

@@ -415,7 +415,7 @@ static int imx_keypad_open(struct input_dev *dev)
 }
 
 #ifdef CONFIG_OF
-static struct of_device_id imx_keypad_of_match[] = {
+static const struct of_device_id imx_keypad_of_match[] = {
 	{ .compatible = "fsl,imx21-kpp", },
 	{ /* sentinel */ }
 };

drivers/input/keyboard/jornada680_kbd.c

@@ -16,6 +16,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/device.h>
 #include <linux/input.h>
 #include <linux/input-polldev.h>
 #include <linux/interrupt.h>
@@ -185,14 +186,15 @@ static int jornada680kbd_probe(struct platform_device *pdev)
 	struct input_dev *input_dev;
 	int i, error;
 
-	jornadakbd = kzalloc(sizeof(struct jornadakbd), GFP_KERNEL);
+	jornadakbd = devm_kzalloc(&pdev->dev, sizeof(struct jornadakbd),
+				  GFP_KERNEL);
 	if (!jornadakbd)
 		return -ENOMEM;
 
-	poll_dev = input_allocate_polled_device();
+	poll_dev = devm_input_allocate_polled_device(&pdev->dev);
 	if (!poll_dev) {
-		error = -ENOMEM;
-		goto failed;
+		dev_err(&pdev->dev, "failed to allocate polled input device\n");
+		return -ENOMEM;
 	}
 
 	platform_set_drvdata(pdev, jornadakbd);
@@ -224,27 +226,10 @@ static int jornada680kbd_probe(struct platform_device *pdev)
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
 	error = input_register_polled_device(jornadakbd->poll_dev);
-	if (error)
-		goto failed;
-
-	return 0;
-
- failed:
-	printk(KERN_ERR "Jornadakbd: failed to register driver, error: %d\n",
-		error);
-	input_free_polled_device(poll_dev);
-	kfree(jornadakbd);
-	return error;
-
-}
-
-static int jornada680kbd_remove(struct platform_device *pdev)
-{
-	struct jornadakbd *jornadakbd = platform_get_drvdata(pdev);
-
-	input_unregister_polled_device(jornadakbd->poll_dev);
-	input_free_polled_device(jornadakbd->poll_dev);
-	kfree(jornadakbd);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register polled input device\n");
+		return error;
+	}
 
 	return 0;
 }
@@ -255,7 +240,6 @@ static struct platform_driver jornada680kbd_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe	= jornada680kbd_probe,
-	.remove	= jornada680kbd_remove,
 };
 module_platform_driver(jornada680kbd_driver);
 

drivers/input/keyboard/mcs_touchkey.c

@@ -147,7 +147,7 @@ static int mcs_touchkey_probe(struct i2c_client *client,
 	}
 	dev_info(&client->dev, "Firmware version: %d\n", fw_ver);
 
-	input_dev->name = "MELPAS MCS Touchkey";
+	input_dev->name = "MELFAS MCS Touchkey";
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 	input_dev->evbit[0] = BIT_MASK(EV_KEY);

drivers/input/keyboard/omap4-keypad.c

@@ -28,11 +28,10 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
 
-#include <linux/platform_data/omap4-keypad.h>
-
 /* OMAP4 registers */
 #define OMAP4_KBD_REVISION		0x00
 #define OMAP4_KBD_SYSCONFIG		0x10
@@ -218,7 +217,6 @@ static void omap4_keypad_close(struct input_dev *input)
 	pm_runtime_put_sync(input->dev.parent);
 }
 
-#ifdef CONFIG_OF
 static int omap4_keypad_parse_dt(struct device *dev,
 				 struct omap4_keypad *keypad_data)
 {
@@ -235,20 +233,9 @@ static int omap4_keypad_parse_dt(struct device *dev,
 
 	return 0;
 }
-#else
-static inline int omap4_keypad_parse_dt(struct device *dev,
-					struct omap4_keypad *keypad_data)
-{
-	return -ENOSYS;
-}
-#endif
 
 static int omap4_keypad_probe(struct platform_device *pdev)
 {
-	const struct omap4_keypad_platform_data *pdata =
-				dev_get_platdata(&pdev->dev);
-	const struct matrix_keymap_data *keymap_data =
-				pdata ? pdata->keymap_data : NULL;
 	struct omap4_keypad *keypad_data;
 	struct input_dev *input_dev;
 	struct resource *res;
@@ -277,14 +264,9 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 
 	keypad_data->irq = irq;
 
-	if (pdata) {
-		keypad_data->rows = pdata->rows;
-		keypad_data->cols = pdata->cols;
-	} else {
-		error = omap4_keypad_parse_dt(&pdev->dev, keypad_data);
-		if (error)
-			return error;
-	}
+	error = omap4_keypad_parse_dt(&pdev->dev, keypad_data);
+	if (error)
+		return error;
 
 	res = request_mem_region(res->start, resource_size(res), pdev->name);
 	if (!res) {
@@ -363,7 +345,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 		goto err_free_input;
 	}
 
-	error = matrix_keypad_build_keymap(keymap_data, NULL,
+	error = matrix_keypad_build_keymap(NULL, NULL,
 					   keypad_data->rows, keypad_data->cols,
 					   keypad_data->keymap, input_dev);
 	if (error) {
@@ -434,13 +416,11 @@ static int omap4_keypad_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id omap_keypad_dt_match[] = {
 	{ .compatible = "ti,omap4-keypad" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap_keypad_dt_match);
-#endif
 
 #ifdef CONFIG_PM_SLEEP
 static int omap4_keypad_suspend(struct device *dev)
@@ -482,7 +462,7 @@ static struct platform_driver omap4_keypad_driver = {
 		.name	= "omap4-keypad",
 		.owner	= THIS_MODULE,
 		.pm	= &omap4_keypad_pm_ops,
-		.of_match_table = of_match_ptr(omap_keypad_dt_match),
+		.of_match_table = omap_keypad_dt_match,
 	},
 };
 module_platform_driver(omap4_keypad_driver);

drivers/input/keyboard/st-keyscan.c

+/*
+ * STMicroelectronics Key Scanning driver
+ *
+ * Copyright (c) 2014 STMicroelectonics Ltd.
+ * Author: Stuart Menefy <stuart.menefy@st.com>
+ *
+ * Based on sh_keysc.c, copyright 2008 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/input/matrix_keypad.h>
+
+#define ST_KEYSCAN_MAXKEYS 16
+
+#define KEYSCAN_CONFIG_OFF		0x0
+#define KEYSCAN_CONFIG_ENABLE		0x1
+#define KEYSCAN_DEBOUNCE_TIME_OFF	0x4
+#define KEYSCAN_MATRIX_STATE_OFF	0x8
+#define KEYSCAN_MATRIX_DIM_OFF		0xc
+#define KEYSCAN_MATRIX_DIM_X_SHIFT	0x0
+#define KEYSCAN_MATRIX_DIM_Y_SHIFT	0x2
+
+struct st_keyscan {
+	void __iomem *base;
+	int irq;
+	struct clk *clk;
+	struct input_dev *input_dev;
+	unsigned long last_state;
+	unsigned int n_rows;
+	unsigned int n_cols;
+	unsigned int debounce_us;
+};
+
+static irqreturn_t keyscan_isr(int irq, void *dev_id)
+{
+	struct st_keyscan *keypad = dev_id;
+	unsigned short *keycode = keypad->input_dev->keycode;
+	unsigned long state, change;
+	int bit_nr;
+
+	state = readl(keypad->base + KEYSCAN_MATRIX_STATE_OFF) & 0xffff;
+	change = keypad->last_state ^ state;
+	keypad->last_state = state;
+
+	for_each_set_bit(bit_nr, &change, BITS_PER_LONG)
+		input_report_key(keypad->input_dev,
+				 keycode[bit_nr], state & BIT(bit_nr));
+
+	input_sync(keypad->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int keyscan_start(struct st_keyscan *keypad)
+{
+	int error;
+
+	error = clk_enable(keypad->clk);
+	if (error)
+		return error;
+
+	writel(keypad->debounce_us * (clk_get_rate(keypad->clk) / 1000000),
+	       keypad->base + KEYSCAN_DEBOUNCE_TIME_OFF);
+
+	writel(((keypad->n_cols - 1) << KEYSCAN_MATRIX_DIM_X_SHIFT) |
+	       ((keypad->n_rows - 1) << KEYSCAN_MATRIX_DIM_Y_SHIFT),
+	       keypad->base + KEYSCAN_MATRIX_DIM_OFF);
+
+	writel(KEYSCAN_CONFIG_ENABLE, keypad->base + KEYSCAN_CONFIG_OFF);
+
+	return 0;
+}
+
+static void keyscan_stop(struct st_keyscan *keypad)
+{
+	writel(0, keypad->base + KEYSCAN_CONFIG_OFF);
+
+	clk_disable(keypad->clk);
+}
+
+static int keyscan_open(struct input_dev *dev)
+{
+	struct st_keyscan *keypad = input_get_drvdata(dev);
+
+	return keyscan_start(keypad);
+}
+
+static void keyscan_close(struct input_dev *dev)
+{
+	struct st_keyscan *keypad = input_get_drvdata(dev);
+
+	keyscan_stop(keypad);
+}
+
+static int keypad_matrix_key_parse_dt(struct st_keyscan *keypad_data)
+{
+	struct device *dev = keypad_data->input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	int error;
+
+	error = matrix_keypad_parse_of_params(dev, &keypad_data->n_rows,
+					      &keypad_data->n_cols);
+	if (error) {
+		dev_err(dev, "failed to parse keypad params\n");
+		return error;
+	}
+
+	of_property_read_u32(np, "st,debounce-us", &keypad_data->debounce_us);
+
+	dev_dbg(dev, "n_rows=%d n_col=%d debounce=%d\n",
+		keypad_data->n_rows, keypad_data->n_cols,
+		keypad_data->debounce_us);
+
+	return 0;
+}
+
+static int keyscan_probe(struct platform_device *pdev)
+{
+	struct st_keyscan *keypad_data;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int error;
+
+	if (!pdev->dev.of_node) {
+		dev_err(&pdev->dev, "no DT data present\n");
+		return -EINVAL;
+	}
+
+	keypad_data = devm_kzalloc(&pdev->dev, sizeof(*keypad_data),
+				   GFP_KERNEL);
+	if (!keypad_data)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = pdev->name;
+	input_dev->phys = "keyscan-keys/input0";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = keyscan_open;
+	input_dev->close = keyscan_close;
+
+	input_dev->id.bustype = BUS_HOST;
+
+	error = keypad_matrix_key_parse_dt(keypad_data);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   keypad_data->n_rows,
+					   keypad_data->n_cols,
+					   NULL, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		return error;
+	}
+
+	input_set_drvdata(input_dev, keypad_data);
+
+	keypad_data->input_dev = input_dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad_data->base))
+		return PTR_ERR(keypad_data->base);
+
+	keypad_data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad_data->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return PTR_ERR(keypad_data->clk);
+	}
+
+	error = clk_enable(keypad_data->clk);
+	if (error) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return error;
+	}
+
+	keyscan_stop(keypad_data);
+
+	keypad_data->irq = platform_get_irq(pdev, 0);
+	if (keypad_data->irq < 0) {
+		dev_err(&pdev->dev, "no IRQ specified\n");
+		return -EINVAL;
+	}
+
+	error = devm_request_irq(&pdev->dev, keypad_data->irq, keyscan_isr, 0,
+				 pdev->name, keypad_data);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, keypad_data);
+
+	device_set_wakeup_capable(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int keyscan_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct st_keyscan *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input = keypad->input_dev;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(keypad->irq);
+	else if (input->users)
+		keyscan_stop(keypad);
+
+	mutex_unlock(&input->mutex);
+	return 0;
+}
+
+static int keyscan_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct st_keyscan *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input = keypad->input_dev;
+	int retval = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(keypad->irq);
+	else if (input->users)
+		retval = keyscan_start(keypad);
+
+	mutex_unlock(&input->mutex);
+	return retval;
+}
+
+static SIMPLE_DEV_PM_OPS(keyscan_dev_pm_ops, keyscan_suspend, keyscan_resume);
+
+static const struct of_device_id keyscan_of_match[] = {
+	{ .compatible = "st,sti-keyscan" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, keyscan_of_match);
+
+static struct platform_driver keyscan_device_driver = {
+	.probe		= keyscan_probe,
+	.driver		= {
+		.name	= "st-keyscan",
+		.pm	= &keyscan_dev_pm_ops,
+		.of_match_table = of_match_ptr(keyscan_of_match),
+	}
+};
+
+module_platform_driver(keyscan_device_driver);
+
+MODULE_AUTHOR("Stuart Menefy <stuart.menefy@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics keyscan device driver");
+MODULE_LICENSE("GPL");

drivers/input/keyboard/tc3589x-keypad.c

@@ -296,6 +296,65 @@ static void tc3589x_keypad_close(struct input_dev *input)
 	tc3589x_keypad_disable(keypad);
 }
 
+#ifdef CONFIG_OF
+static const struct tc3589x_keypad_platform_data *
+tc3589x_keypad_of_probe(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct tc3589x_keypad_platform_data *plat;
+	u32 cols, rows;
+	u32 debounce_ms;
+	int proplen;
+
+	if (!np)
+		return ERR_PTR(-ENODEV);
+
+	plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
+	if (!plat)
+		return ERR_PTR(-ENOMEM);
+
+	of_property_read_u32(np, "keypad,num-columns", &cols);
+	of_property_read_u32(np, "keypad,num-rows", &rows);
+	plat->kcol = (u8) cols;
+	plat->krow = (u8) rows;
+	if (!plat->krow || !plat->kcol ||
+	     plat->krow > TC_KPD_ROWS || plat->kcol > TC_KPD_COLUMNS) {
+		dev_err(dev,
+			"keypad columns/rows not properly specified (%ux%u)\n",
+			plat->kcol, plat->krow);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!of_get_property(np, "linux,keymap", &proplen)) {
+		dev_err(dev, "property linux,keymap not found\n");
+		return ERR_PTR(-ENOENT);
+	}
+
+	plat->no_autorepeat = of_property_read_bool(np, "linux,no-autorepeat");
+	plat->enable_wakeup = of_property_read_bool(np, "linux,wakeup");
+
+	/* The custom delay format is ms/16 */
+	of_property_read_u32(np, "debounce-delay-ms", &debounce_ms);
+	if (debounce_ms)
+		plat->debounce_period = debounce_ms * 16;
+	else
+		plat->debounce_period = TC_KPD_DEBOUNCE_PERIOD;
+
+	plat->settle_time = TC_KPD_SETTLE_TIME;
+	/* FIXME: should be property of the IRQ resource? */
+	plat->irqtype = IRQF_TRIGGER_FALLING;
+
+	return plat;
+}
+#else
+static inline const struct tc3589x_keypad_platform_data *
+tc3589x_keypad_of_probe(struct device *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
+
+
 static int tc3589x_keypad_probe(struct platform_device *pdev)
 {
 	struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
@@ -306,8 +365,11 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
 
 	plat = tc3589x->pdata->keypad;
 	if (!plat) {
-		dev_err(&pdev->dev, "invalid keypad platform data\n");
-		return -EINVAL;
+		plat = tc3589x_keypad_of_probe(&pdev->dev);
+		if (IS_ERR(plat)) {
+			dev_err(&pdev->dev, "invalid keypad platform data\n");
+			return PTR_ERR(plat);
+		}
 	}
 
 	irq = platform_get_irq(pdev, 0);

drivers/input/misc/88pm860x_onkey.c

@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/mfd/88pm860x.h>
 #include <linux/slab.h>
+#include <linux/device.h>
 
 #define PM8607_WAKEUP		0x0b
 
@@ -68,7 +69,8 @@ static int pm860x_onkey_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	info = kzalloc(sizeof(struct pm860x_onkey_info), GFP_KERNEL);
+	info = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_onkey_info),
+			    GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 	info->chip = chip;
@@ -76,11 +78,10 @@ static int pm860x_onkey_probe(struct platform_device *pdev)
 	info->dev = &pdev->dev;
 	info->irq = irq;
 
-	info->idev = input_allocate_device();
+	info->idev = devm_input_allocate_device(&pdev->dev);
 	if (!info->idev) {
 		dev_err(chip->dev, "Failed to allocate input dev\n");
-		ret = -ENOMEM;
-		goto out;
+		return -ENOMEM;
 	}
 
 	info->idev->name = "88pm860x_on";
@@ -93,42 +94,22 @@ static int pm860x_onkey_probe(struct platform_device *pdev)
 	ret = input_register_device(info->idev);
 	if (ret) {
 		dev_err(chip->dev, "Can't register input device: %d\n", ret);
-		goto out_reg;
+		return ret;
 	}
 
-	ret = request_threaded_irq(info->irq, NULL, pm860x_onkey_handler,
-				   IRQF_ONESHOT, "onkey", info);
+	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+					pm860x_onkey_handler, IRQF_ONESHOT,
+					"onkey", info);
 	if (ret < 0) {
 		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
 			info->irq, ret);
-		goto out_irq;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, info);
 	device_init_wakeup(&pdev->dev, 1);
 
 	return 0;
-
-out_irq:
-	input_unregister_device(info->idev);
-	kfree(info);
-	return ret;
-
-out_reg:
-	input_free_device(info->idev);
-out:
-	kfree(info);
-	return ret;
-}
-
-static int pm860x_onkey_remove(struct platform_device *pdev)
-{
-	struct pm860x_onkey_info *info = platform_get_drvdata(pdev);
-
-	free_irq(info->irq, info);
-	input_unregister_device(info->idev);
-	kfree(info);
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -161,7 +142,6 @@ static struct platform_driver pm860x_onkey_driver = {
 		.pm	= &pm860x_onkey_pm_ops,
 	},
 	.probe		= pm860x_onkey_probe,
-	.remove		= pm860x_onkey_remove,
 };
 module_platform_driver(pm860x_onkey_driver);
 

drivers/input/misc/Kconfig

@@ -224,7 +224,7 @@ config INPUT_GP2A
 
 config INPUT_GPIO_BEEPER
 	tristate "Generic GPIO Beeper support"
-	depends on OF_GPIO
+	depends on GPIOLIB
 	help
 	  Say Y here if you have a beeper connected to a GPIO pin.
 

drivers/input/misc/ab8500-ponkey.c

@@ -7,6 +7,7 @@
  * AB8500 Power-On Key handler
  */
 
+#include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -65,12 +66,14 @@ static int ab8500_ponkey_probe(struct platform_device *pdev)
 		return irq_dbr;
 	}
 
-	ponkey = kzalloc(sizeof(struct ab8500_ponkey), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!ponkey || !input) {
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
+	ponkey = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_ponkey),
+			      GFP_KERNEL);
+	if (!ponkey)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
 
 	ponkey->idev = input;
 	ponkey->ab8500 = ab8500;
@@ -82,52 +85,32 @@ static int ab8500_ponkey_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_KEY, KEY_POWER);
 
-	error = request_any_context_irq(ponkey->irq_dbf, ab8500_ponkey_handler,
-					0, "ab8500-ponkey-dbf", ponkey);
+	error = devm_request_any_context_irq(&pdev->dev, ponkey->irq_dbf,
+					     ab8500_ponkey_handler, 0,
+					     "ab8500-ponkey-dbf", ponkey);
 	if (error < 0) {
 		dev_err(ab8500->dev, "Failed to request dbf IRQ#%d: %d\n",
 			ponkey->irq_dbf, error);
-		goto err_free_mem;
+		return error;
 	}
 
-	error = request_any_context_irq(ponkey->irq_dbr, ab8500_ponkey_handler,
-					0, "ab8500-ponkey-dbr", ponkey);
+	error = devm_request_any_context_irq(&pdev->dev, ponkey->irq_dbr,
+					     ab8500_ponkey_handler, 0,
+					     "ab8500-ponkey-dbr", ponkey);
 	if (error < 0) {
 		dev_err(ab8500->dev, "Failed to request dbr IRQ#%d: %d\n",
 			ponkey->irq_dbr, error);
-		goto err_free_dbf_irq;
+		return error;
 	}
 
 	error = input_register_device(ponkey->idev);
 	if (error) {
 		dev_err(ab8500->dev, "Can't register input device: %d\n", error);
-		goto err_free_dbr_irq;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, ponkey);
 	return 0;
-
-err_free_dbr_irq:
-	free_irq(ponkey->irq_dbr, ponkey);
-err_free_dbf_irq:
-	free_irq(ponkey->irq_dbf, ponkey);
-err_free_mem:
-	input_free_device(input);
-	kfree(ponkey);
-
-	return error;
-}
-
-static int ab8500_ponkey_remove(struct platform_device *pdev)
-{
-	struct ab8500_ponkey *ponkey = platform_get_drvdata(pdev);
-
-	free_irq(ponkey->irq_dbf, ponkey);
-	free_irq(ponkey->irq_dbr, ponkey);
-	input_unregister_device(ponkey->idev);
-	kfree(ponkey);
-
-	return 0;
 }
 
 #ifdef CONFIG_OF
@@ -144,7 +127,6 @@ static struct platform_driver ab8500_ponkey_driver = {
 		.of_match_table = of_match_ptr(ab8500_ponkey_match),
 	},
 	.probe		= ab8500_ponkey_probe,
-	.remove		= ab8500_ponkey_remove,
 };
 module_platform_driver(ab8500_ponkey_driver);
 

drivers/input/misc/gpio-beeper.c

 /*
  * Generic GPIO beeper driver
  *
- * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ * Copyright (C) 2013-2014 Alexander Shiyan <shc_work@mail.ru>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -11,7 +11,8 @@
 
 #include <linux/input.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 
@@ -19,14 +20,13 @@
 
 struct gpio_beeper {
 	struct work_struct	work;
-	int			gpio;
-	bool			active_low;
+	struct gpio_desc	*desc;
 	bool			beeping;
 };
 
 static void gpio_beeper_toggle(struct gpio_beeper *beep, bool on)
 {
-	gpio_set_value_cansleep(beep->gpio, on ^ beep->active_low);
+	gpiod_set_value_cansleep(beep->desc, on);
 }
 
 static void gpio_beeper_work(struct work_struct *work)
@@ -65,18 +65,16 @@ static void gpio_beeper_close(struct input_dev *input)
 static int gpio_beeper_probe(struct platform_device *pdev)
 {
 	struct gpio_beeper *beep;
-	enum of_gpio_flags flags;
 	struct input_dev *input;
-	unsigned long gflags;
 	int err;
 
 	beep = devm_kzalloc(&pdev->dev, sizeof(*beep), GFP_KERNEL);
 	if (!beep)
 		return -ENOMEM;
 
-	beep->gpio = of_get_gpio_flags(pdev->dev.of_node, 0, &flags);
-	if (!gpio_is_valid(beep->gpio))
-		return beep->gpio;
+	beep->desc = devm_gpiod_get(&pdev->dev, NULL);
+	if (IS_ERR(beep->desc))
+		return PTR_ERR(beep->desc);
 
 	input = devm_input_allocate_device(&pdev->dev);
 	if (!input)
@@ -94,10 +92,7 @@ static int gpio_beeper_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_SND, SND_BELL);
 
-	beep->active_low = flags & OF_GPIO_ACTIVE_LOW;
-	gflags = beep->active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-
-	err = devm_gpio_request_one(&pdev->dev, beep->gpio, gflags, pdev->name);
+	err = gpiod_direction_output(beep->desc, 0);
 	if (err)
 		return err;
 
@@ -106,17 +101,19 @@ static int gpio_beeper_probe(struct platform_device *pdev)
 	return input_register_device(input);
 }
 
-static struct of_device_id gpio_beeper_of_match[] = {
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_beeper_of_match[] = {
 	{ .compatible = BEEPER_MODNAME, },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, gpio_beeper_of_match);
+#endif
 
 static struct platform_driver gpio_beeper_platform_driver = {
 	.driver	= {
 		.name		= BEEPER_MODNAME,
 		.owner		= THIS_MODULE,
-		.of_match_table	= gpio_beeper_of_match,
+		.of_match_table	= of_match_ptr(gpio_beeper_of_match),
 	},
 	.probe	= gpio_beeper_probe,
 };

drivers/input/misc/ims-pcu.c

@@ -1566,6 +1566,7 @@ static int ims_pcu_buffers_alloc(struct ims_pcu *pcu)
 	if (!pcu->urb_ctrl_buf) {
 		dev_err(pcu->dev,
 			"Failed to allocate memory for read buffer\n");
+		error = -ENOMEM;
 		goto err_free_urb_out_buf;
 	}
 

drivers/input/misc/max8925_onkey.c

@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/mfd/max8925.h>
 #include <linux/slab.h>
+#include <linux/device.h>
 
 #define SW_INPUT		(1 << 7)	/* 0/1 -- up/down */
 #define HARDRESET_EN		(1 << 7)
@@ -81,12 +82,14 @@ static int max8925_onkey_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	info = kzalloc(sizeof(struct max8925_onkey_info), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!info || !input) {
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
+	info = devm_kzalloc(&pdev->dev, sizeof(struct max8925_onkey_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
 
 	info->idev = input;
 	info->i2c = chip->i2c;
@@ -100,54 +103,33 @@ static int max8925_onkey_probe(struct platform_device *pdev)
 	input->dev.parent = &pdev->dev;
 	input_set_capability(input, EV_KEY, KEY_POWER);
 
-	error = request_threaded_irq(irq[0], NULL, max8925_onkey_handler,
-				     IRQF_ONESHOT, "onkey-down", info);
+	error = devm_request_threaded_irq(&pdev->dev, irq[0], NULL,
+					  max8925_onkey_handler, IRQF_ONESHOT,
+					  "onkey-down", info);
 	if (error < 0) {
 		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
 			irq[0], error);
-		goto err_free_mem;
+		return error;
 	}
 
-	error = request_threaded_irq(irq[1], NULL, max8925_onkey_handler,
-				     IRQF_ONESHOT, "onkey-up", info);
+	error = devm_request_threaded_irq(&pdev->dev, irq[1], NULL,
+					  max8925_onkey_handler, IRQF_ONESHOT,
+					  "onkey-up", info);
 	if (error < 0) {
 		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
 			irq[1], error);
-		goto err_free_irq0;
+		return error;
 	}
 
 	error = input_register_device(info->idev);
 	if (error) {
 		dev_err(chip->dev, "Can't register input device: %d\n", error);
-		goto err_free_irq1;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, info);
 	device_init_wakeup(&pdev->dev, 1);
 
-	return 0;
-
-err_free_irq1:
-	free_irq(irq[1], info);
-err_free_irq0:
-	free_irq(irq[0], info);
-err_free_mem:
-	input_free_device(input);
-	kfree(info);
-
-	return error;
-}
-
-static int max8925_onkey_remove(struct platform_device *pdev)
-{
-	struct max8925_onkey_info *info = platform_get_drvdata(pdev);
-	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
-
-	free_irq(info->irq[0] + chip->irq_base, info);
-	free_irq(info->irq[1] + chip->irq_base, info);
-	input_unregister_device(info->idev);
-	kfree(info);
-
 	return 0;
 }
 
@@ -190,7 +172,6 @@ static struct platform_driver max8925_onkey_driver = {
 		.pm	= &max8925_onkey_pm_ops,
 	},
 	.probe		= max8925_onkey_probe,
-	.remove		= max8925_onkey_remove,
 };
 module_platform_driver(max8925_onkey_driver);
 

drivers/input/misc/max8997_haptic.c

@@ -181,11 +181,21 @@ static void max8997_haptic_enable(struct max8997_haptic *chip)
 	}
 
 	if (!chip->enabled) {
-		chip->enabled = true;
-		regulator_enable(chip->regulator);
+		error = regulator_enable(chip->regulator);
+		if (error) {
+			dev_err(chip->dev, "Failed to enable regulator\n");
+			goto out;
+		}
 		max8997_haptic_configure(chip);
-		if (chip->mode == MAX8997_EXTERNAL_MODE)
-			pwm_enable(chip->pwm);
+		if (chip->mode == MAX8997_EXTERNAL_MODE) {
+			error = pwm_enable(chip->pwm);
+			if (error) {
+				dev_err(chip->dev, "Failed to enable PWM\n");
+				regulator_disable(chip->regulator);
+				goto out;
+			}
+		}
+		chip->enabled = true;
 	}
 
 out:

drivers/input/misc/pmic8xxx-pwrkey.c

@@ -92,15 +92,15 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	bool pull_up;
 
 	if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay))
-		kpd_delay = 0;
+		kpd_delay = 15625;
 
-	pull_up = of_property_read_bool(pdev->dev.of_node, "pull-up");
-
-	if (kpd_delay > 62500) {
+	if (kpd_delay > 62500 || kpd_delay == 0) {
 		dev_err(&pdev->dev, "invalid power key trigger delay\n");
 		return -EINVAL;
 	}
 
+	pull_up = of_property_read_bool(pdev->dev.of_node, "pull-up");
+
 	regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!regmap) {
 		dev_err(&pdev->dev, "failed to locate regmap for the device\n");

drivers/input/misc/rotary_encoder.c

@@ -143,7 +143,7 @@ static irqreturn_t rotary_encoder_half_period_irq(int irq, void *dev_id)
 }
 
 #ifdef CONFIG_OF
-static struct of_device_id rotary_encoder_of_match[] = {
+static const struct of_device_id rotary_encoder_of_match[] = {
 	{ .compatible = "rotary-encoder", },
 	{ },
 };

drivers/input/misc/soc_button_array.c

@@ -17,7 +17,6 @@
 #include <linux/acpi.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio_keys.h>
-#include <linux/input.h>
 #include <linux/platform_device.h>
 #include <linux/pnp.h>
 

drivers/input/misc/twl6040-vibra.c

@@ -262,7 +262,7 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 	struct vibra_info *info;
 	int vddvibl_uV = 0;
 	int vddvibr_uV = 0;
-	int ret;
+	int error;
 
 	twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
 						 "vibra");
@@ -309,12 +309,12 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 
 	mutex_init(&info->mutex);
 
-	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
-					twl6040_vib_irq_handler, 0,
-					"twl6040_irq_vib", info);
-	if (ret) {
-		dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
-		return ret;
+	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+					  twl6040_vib_irq_handler, 0,
+					  "twl6040_irq_vib", info);
+	if (error) {
+		dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
+		return error;
 	}
 
 	info->supplies[0].supply = "vddvibl";
@@ -323,40 +323,40 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 	 * When booted with Device tree the regulators are attached to the
 	 * parent device (twl6040 MFD core)
 	 */
-	ret = regulator_bulk_get(twl6040_core_dev, ARRAY_SIZE(info->supplies),
-				 info->supplies);
-	if (ret) {
-		dev_err(info->dev, "couldn't get regulators %d\n", ret);
-		return ret;
+	error = devm_regulator_bulk_get(twl6040_core_dev,
+					ARRAY_SIZE(info->supplies),
+					info->supplies);
+	if (error) {
+		dev_err(info->dev, "couldn't get regulators %d\n", error);
+		return error;
 	}
 
 	if (vddvibl_uV) {
-		ret = regulator_set_voltage(info->supplies[0].consumer,
-					    vddvibl_uV, vddvibl_uV);
-		if (ret) {
+		error = regulator_set_voltage(info->supplies[0].consumer,
+					      vddvibl_uV, vddvibl_uV);
+		if (error) {
 			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
-				ret);
-			goto err_regulator;
+				error);
+			return error;
 		}
 	}
 
 	if (vddvibr_uV) {
-		ret = regulator_set_voltage(info->supplies[1].consumer,
-					    vddvibr_uV, vddvibr_uV);
-		if (ret) {
+		error = regulator_set_voltage(info->supplies[1].consumer,
+					      vddvibr_uV, vddvibr_uV);
+		if (error) {
 			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
-				ret);
-			goto err_regulator;
+				error);
+			return error;
 		}
 	}
 
 	INIT_WORK(&info->play_work, vibra_play_work);
 
-	info->input_dev = input_allocate_device();
-	if (info->input_dev == NULL) {
+	info->input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!info->input_dev) {
 		dev_err(info->dev, "couldn't allocate input device\n");
-		ret = -ENOMEM;
-		goto err_regulator;
+		return -ENOMEM;
 	}
 
 	input_set_drvdata(info->input_dev, info);
@@ -367,44 +367,25 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 	info->input_dev->close = twl6040_vibra_close;
 	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
 
-	ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
-	if (ret < 0) {
+	error = input_ff_create_memless(info->input_dev, NULL, vibra_play);
+	if (error) {
 		dev_err(info->dev, "couldn't register vibrator to FF\n");
-		goto err_ialloc;
+		return error;
 	}
 
-	ret = input_register_device(info->input_dev);
-	if (ret < 0) {
+	error = input_register_device(info->input_dev);
+	if (error) {
 		dev_err(info->dev, "couldn't register input device\n");
-		goto err_iff;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, info);
 
-	return 0;
-
-err_iff:
-	input_ff_destroy(info->input_dev);
-err_ialloc:
-	input_free_device(info->input_dev);
-err_regulator:
-	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
-	return ret;
-}
-
-static int twl6040_vibra_remove(struct platform_device *pdev)
-{
-	struct vibra_info *info = platform_get_drvdata(pdev);
-
-	input_unregister_device(info->input_dev);
-	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
-
 	return 0;
 }
 
 static struct platform_driver twl6040_vibra_driver = {
 	.probe		= twl6040_vibra_probe,
-	.remove		= twl6040_vibra_remove,
 	.driver		= {
 		.name	= "twl6040-vibra",
 		.owner	= THIS_MODULE,

drivers/input/mouse/Kconfig

@@ -53,7 +53,7 @@ config MOUSE_PS2_LOGIPS2PP
 	default y
 	depends on MOUSE_PS2
 	help
-	  Say Y here if you have a Logictech PS/2++ mouse connected to
+	  Say Y here if you have a Logitech PS/2++ mouse connected to
 	  your system.
 
 	  If unsure, say Y.

drivers/input/mouse/elantech.c

@@ -473,8 +473,15 @@ static void elantech_report_absolute_v3(struct psmouse *psmouse,
 	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
 	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
 	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
-	input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
-	input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+
+	/* For clickpads map both buttons to BTN_LEFT */
+	if (etd->fw_version & 0x001000) {
+		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
+	} else {
+		input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+		input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+	}
+
 	input_report_abs(dev, ABS_PRESSURE, pres);
 	input_report_abs(dev, ABS_TOOL_WIDTH, width);
 
@@ -484,10 +491,17 @@ static void elantech_report_absolute_v3(struct psmouse *psmouse,
 static void elantech_input_sync_v4(struct psmouse *psmouse)
 {
 	struct input_dev *dev = psmouse->dev;
+	struct elantech_data *etd = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 
-	input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
-	input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+	/* For clickpads map both buttons to BTN_LEFT */
+	if (etd->fw_version & 0x001000) {
+		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
+	} else {
+		input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+		input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+	}
+
 	input_mt_report_pointer_emulation(dev, true);
 	input_sync(dev);
 }
@@ -835,7 +849,7 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 		if (etd->set_hw_resolution)
 			etd->reg_10 = 0x0b;
 		else
-			etd->reg_10 = 0x03;
+			etd->reg_10 = 0x01;
 
 		if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
 			rc = -1;
@@ -1336,7 +1350,8 @@ static int elantech_reconnect(struct psmouse *psmouse)
 }
 
 /*
- * Some hw_version 3 models go into error state when we try to set bit 3 of r10
+ * Some hw_version 3 models go into error state when we try to set
+ * bit 3 and/or bit 1 of r10.
  */
 static const struct dmi_system_id no_hw_res_dmi_table[] = {
 #if defined(CONFIG_DMI) && defined(CONFIG_X86)

drivers/input/mouse/synaptics.c

@@ -347,15 +347,6 @@ static int synaptics_resolution(struct psmouse *psmouse)
 	unsigned char resp[3];
 	int i;
 
-	for (i = 0; min_max_pnpid_table[i].pnp_ids; i++)
-		if (matches_pnp_id(psmouse, min_max_pnpid_table[i].pnp_ids)) {
-			priv->x_min = min_max_pnpid_table[i].x_min;
-			priv->x_max = min_max_pnpid_table[i].x_max;
-			priv->y_min = min_max_pnpid_table[i].y_min;
-			priv->y_max = min_max_pnpid_table[i].y_max;
-			return 0;
-		}
-
 	if (SYN_ID_MAJOR(priv->identity) < 4)
 		return 0;
 
@@ -366,6 +357,16 @@ static int synaptics_resolution(struct psmouse *psmouse)
 		}
 	}
 
+	for (i = 0; min_max_pnpid_table[i].pnp_ids; i++) {
+		if (matches_pnp_id(psmouse, min_max_pnpid_table[i].pnp_ids)) {
+			priv->x_min = min_max_pnpid_table[i].x_min;
+			priv->x_max = min_max_pnpid_table[i].x_max;
+			priv->y_min = min_max_pnpid_table[i].y_min;
+			priv->y_max = min_max_pnpid_table[i].y_max;
+			return 0;
+		}
+	}
+
 	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 &&
 	    SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) {
 		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) {

drivers/input/serio/apbps2.c

@@ -203,7 +203,7 @@ static int apbps2_of_remove(struct platform_device *of_dev)
 	return 0;
 }
 
-static struct of_device_id apbps2_of_match[] = {
+static const struct of_device_id apbps2_of_match[] = {
 	{ .name = "GAISLER_APBPS2", },
 	{ .name = "01_060", },
 	{}

drivers/input/serio/olpc_apsp.c

@@ -262,7 +262,7 @@ static int olpc_apsp_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id olpc_apsp_dt_ids[] = {
+static const struct of_device_id olpc_apsp_dt_ids[] = {
 	{ .compatible = "olpc,ap-sp", },
 	{}
 };

drivers/input/tablet/wacom_sys.c

@@ -349,6 +349,7 @@ static int wacom_parse_hid(struct usb_interface *intf,
 						break;
 
 					case MTTPC:
+					case MTTPC_B:
 						features->pktlen = WACOM_PKGLEN_MTTPC;
 						break;
 
@@ -380,6 +381,16 @@ static int wacom_parse_hid(struct usb_interface *intf,
 						i += 12;
 						break;
 
+					case MTTPC_B:
+						features->x_max =
+							get_unaligned_le16(&report[i + 3]);
+						features->x_phy =
+							get_unaligned_le16(&report[i + 6]);
+						features->unit = report[i - 5];
+						features->unitExpo = report[i - 3];
+						i += 9;
+						break;
+
 					default:
 						features->x_max =
 							get_unaligned_le16(&report[i + 3]);
@@ -430,6 +441,14 @@ static int wacom_parse_hid(struct usb_interface *intf,
 						i += 12;
 						break;
 
+					case MTTPC_B:
+						features->y_max =
+							get_unaligned_le16(&report[i + 3]);
+						features->y_phy =
+							get_unaligned_le16(&report[i + 6]);
+						i += 9;
+						break;
+
 					default:
 						features->y_max =
 							features->x_max;

drivers/input/tablet/wacom_wac.c

@@ -484,6 +484,8 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 		input_report_key(input, BTN_TOUCH, 0);
 		input_report_abs(input, ABS_PRESSURE, 0);
 		input_report_abs(input, ABS_DISTANCE, wacom->features.distance_max);
+		if (features->quirks & WACOM_QUIRK_MULTI_INPUT)
+			wacom->shared->stylus_in_proximity = true;
 	}
 
 	/* Exit report */
@@ -928,12 +930,12 @@ static int wacom_24hdt_irq(struct wacom_wac *wacom)
 		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
 
 		if (touch) {
-			int t_x = le16_to_cpup((__le16 *)&data[offset + 2]);
-			int c_x = le16_to_cpup((__le16 *)&data[offset + 4]);
-			int t_y = le16_to_cpup((__le16 *)&data[offset + 6]);
-			int c_y = le16_to_cpup((__le16 *)&data[offset + 8]);
-			int w = le16_to_cpup((__le16 *)&data[offset + 10]);
-			int h = le16_to_cpup((__le16 *)&data[offset + 12]);
+			int t_x = get_unaligned_le16(&data[offset + 2]);
+			int c_x = get_unaligned_le16(&data[offset + 4]);
+			int t_y = get_unaligned_le16(&data[offset + 6]);
+			int c_y = get_unaligned_le16(&data[offset + 8]);
+			int w = get_unaligned_le16(&data[offset + 10]);
+			int h = get_unaligned_le16(&data[offset + 12]);
 
 			input_report_abs(input, ABS_MT_POSITION_X, t_x);
 			input_report_abs(input, ABS_MT_POSITION_Y, t_y);
@@ -962,7 +964,7 @@ static int wacom_mt_touch(struct wacom_wac *wacom)
 	int x_offset = 0;
 
 	/* MTTPC does not support Height and Width */
-	if (wacom->features.type == MTTPC)
+	if (wacom->features.type == MTTPC || wacom->features.type == MTTPC_B)
 		x_offset = -4;
 
 	/*
@@ -978,7 +980,7 @@ static int wacom_mt_touch(struct wacom_wac *wacom)
 	for (i = 0; i < contacts_to_send; i++) {
 		int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3;
 		bool touch = data[offset] & 0x1;
-		int id = le16_to_cpup((__le16 *)&data[offset + 1]);
+		int id = get_unaligned_le16(&data[offset + 1]);
 		int slot = input_mt_get_slot_by_key(input, id);
 
 		if (slot < 0)
@@ -987,8 +989,8 @@ static int wacom_mt_touch(struct wacom_wac *wacom)
 		input_mt_slot(input, slot);
 		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
 		if (touch) {
-			int x = le16_to_cpup((__le16 *)&data[offset + x_offset + 7]);
-			int y = le16_to_cpup((__le16 *)&data[offset + x_offset + 9]);
+			int x = get_unaligned_le16(&data[offset + x_offset + 7]);
+			int y = get_unaligned_le16(&data[offset + x_offset + 9]);
 			input_report_abs(input, ABS_MT_POSITION_X, x);
 			input_report_abs(input, ABS_MT_POSITION_Y, y);
 		}
@@ -1047,6 +1049,10 @@ static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
 			prox = data[0] & 0x01;
 			x = get_unaligned_le16(&data[1]);
 			y = get_unaligned_le16(&data[3]);
+		} else if (len == WACOM_PKGLEN_TPC1FG_B) {
+			prox = data[2] & 0x01;
+			x = get_unaligned_le16(&data[3]);
+			y = get_unaligned_le16(&data[5]);
 		} else {
 			prox = data[1] & 0x01;
 			x = le16_to_cpup((__le16 *)&data[2]);
@@ -1110,6 +1116,9 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 	case WACOM_PKGLEN_TPC2FG:
 		return wacom_tpc_mt_touch(wacom);
 
+	case WACOM_PKGLEN_PENABLED:
+		return wacom_tpc_pen(wacom);
+
 	default:
 		switch (data[0]) {
 		case WACOM_REPORT_TPC1FG:
@@ -1119,6 +1128,7 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 			return wacom_tpc_single_touch(wacom, len);
 
 		case WACOM_REPORT_TPCMT:
+		case WACOM_REPORT_TPCMT2:
 			return wacom_mt_touch(wacom);
 
 		case WACOM_REPORT_PENABLED:
@@ -1461,6 +1471,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 	case TABLETPC2FG:
 	case MTSCREEN:
 	case MTTPC:
+	case MTTPC_B:
 		sync = wacom_tpc_irq(wacom_wac, len);
 		break;
 
@@ -1565,10 +1576,10 @@ static void wacom_abs_set_axis(struct input_dev *input_dev,
 	struct wacom_features *features = &wacom_wac->features;
 
 	if (features->device_type == BTN_TOOL_PEN) {
-		input_set_abs_params(input_dev, ABS_X, 0, features->x_max,
-				     features->x_fuzz, 0);
-		input_set_abs_params(input_dev, ABS_Y, 0, features->y_max,
-				     features->y_fuzz, 0);
+		input_set_abs_params(input_dev, ABS_X, features->x_min,
+				     features->x_max, features->x_fuzz, 0);
+		input_set_abs_params(input_dev, ABS_Y, features->y_min,
+				     features->y_max, features->y_fuzz, 0);
 		input_set_abs_params(input_dev, ABS_PRESSURE, 0,
 			features->pressure_max, features->pressure_fuzz, 0);
 
@@ -1802,6 +1813,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 	case MTSCREEN:
 	case MTTPC:
+	case MTTPC_B:
 	case TABLETPC2FG:
 		if (features->device_type == BTN_TOOL_FINGER) {
 			unsigned int flags = INPUT_MT_DIRECT;
@@ -2123,11 +2135,11 @@ static const struct wacom_features wacom_features_0x317 =
 	  63, INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
 	  .touch_max = 16 };
 static const struct wacom_features wacom_features_0xF4 =
-	{ "Wacom Cintiq 24HD",       WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
-	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	{ "Wacom Cintiq 24HD",       WACOM_PKGLEN_INTUOS,   104280, 65400, 2047,
+	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
 static const struct wacom_features wacom_features_0xF8 =
-	{ "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS,   104480, 65600, 2047, /* Pen */
-	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	{ "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS,   104280, 65400, 2047, /* Pen */
+	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
 static const struct wacom_features wacom_features_0xF6 =
 	{ "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */
@@ -2142,8 +2154,8 @@ static const struct wacom_features wacom_features_0xC6 =
 	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023,
 	  63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0x304 =
-	{ "Wacom Cintiq 13HD",    WACOM_PKGLEN_INTUOS,    59552, 33848, 1023,
-	  63, WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	{ "Wacom Cintiq 13HD",    WACOM_PKGLEN_INTUOS,    59352, 33648, 1023,
+	  63, WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
 static const struct wacom_features wacom_features_0xC7 =
 	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,
 	  0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2157,24 +2169,24 @@ static const struct wacom_features wacom_features_0xFB =
 	{ "Wacom DTU1031",        WACOM_PKGLEN_DTUS,      22096, 13960,  511,
 	  0, DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x57 =
-	{ "Wacom DTK2241",        WACOM_PKGLEN_INTUOS,    95840, 54260, 2047,
-	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES};
+	{ "Wacom DTK2241",        WACOM_PKGLEN_INTUOS,    95640, 54060, 2047,
+	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
 static const struct wacom_features wacom_features_0x59 = /* Pen */
-	{ "Wacom DTH2242",        WACOM_PKGLEN_INTUOS,    95840, 54260, 2047,
-	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	{ "Wacom DTH2242",        WACOM_PKGLEN_INTUOS,    95640, 54060, 2047,
+	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D };
 static const struct wacom_features wacom_features_0x5D = /* Touch */
 	{ "Wacom DTH2242",       .type = WACOM_24HDT,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10 };
 static const struct wacom_features wacom_features_0xCC =
-	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87200, 65600, 2047,
-	  63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87000, 65400, 2047,
+	  63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
 static const struct wacom_features wacom_features_0xFA =
-	{ "Wacom Cintiq 22HD",    WACOM_PKGLEN_INTUOS,    95840, 54260, 2047,
-	  63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	{ "Wacom Cintiq 22HD",    WACOM_PKGLEN_INTUOS,    95640, 54060, 2047,
+	  63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
 static const struct wacom_features wacom_features_0x5B =
-	{ "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS,      95840, 54260, 2047,
-	  63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	{ "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS,      95640, 54060, 2047,
+	  63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e };
 static const struct wacom_features wacom_features_0x5E =
 	{ "Wacom Cintiq 22HDT", .type = WACOM_24HDT,
@@ -2233,9 +2245,21 @@ static const struct wacom_features wacom_features_0x10E =
 static const struct wacom_features wacom_features_0x10F =
 	{ "Wacom ISDv4 10F",      WACOM_PKGLEN_MTTPC,     27760, 15694,  255,
 	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x116 =
+	{ "Wacom ISDv4 116",      WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
+	  0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x4001 =
 	{ "Wacom ISDv4 4001",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
 	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x4004 =
+	{ "Wacom ISDv4 4004",      WACOM_PKGLEN_MTTPC,     11060, 6220,  255,
+	  0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x5000 =
+	{ "Wacom ISDv4 5000",      WACOM_PKGLEN_MTTPC,     27848, 15752,  1023,
+	  0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x5002 =
+	{ "Wacom ISDv4 5002",      WACOM_PKGLEN_MTTPC,     29576, 16724,  1023,
+	  0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x47 =
 	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
 	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2316,8 +2340,8 @@ static const struct wacom_features wacom_features_0x6004 =
 	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x0307 =
-	{ "Wacom ISDv5 307", WACOM_PKGLEN_INTUOS,  59552,  33848, 2047,
-	  63, CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	{ "Wacom ISDv5 307", WACOM_PKGLEN_INTUOS,  59352,  33648, 2047,
+	  63, CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 };
 static const struct wacom_features wacom_features_0x0309 =
 	{ "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */
@@ -2447,6 +2471,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x10D) },
 	{ USB_DEVICE_WACOM(0x10E) },
 	{ USB_DEVICE_WACOM(0x10F) },
+	{ USB_DEVICE_WACOM(0x116) },
 	{ USB_DEVICE_WACOM(0x300) },
 	{ USB_DEVICE_WACOM(0x301) },
 	{ USB_DEVICE_DETAILED(0x302, USB_CLASS_HID, 0, 0) },
@@ -2457,6 +2482,9 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
 	{ USB_DEVICE_DETAILED(0x317, USB_CLASS_HID, 0, 0) },
 	{ USB_DEVICE_WACOM(0x4001) },
+	{ USB_DEVICE_WACOM(0x4004) },
+	{ USB_DEVICE_WACOM(0x5000) },
+	{ USB_DEVICE_WACOM(0x5002) },
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_WACOM(0xF4) },
 	{ USB_DEVICE_WACOM(0xF8) },

drivers/input/tablet/wacom_wac.h

@@ -22,6 +22,7 @@
 #define WACOM_PKGLEN_BBFUN	 9
 #define WACOM_PKGLEN_INTUOS	10
 #define WACOM_PKGLEN_TPC1FG	 5
+#define WACOM_PKGLEN_TPC1FG_B	10
 #define WACOM_PKGLEN_TPC2FG	14
 #define WACOM_PKGLEN_BBTOUCH	20
 #define WACOM_PKGLEN_BBTOUCH3	64
@@ -30,6 +31,7 @@
 #define WACOM_PKGLEN_MTOUCH	62
 #define WACOM_PKGLEN_MTTPC	40
 #define WACOM_PKGLEN_DTUS	68
+#define WACOM_PKGLEN_PENABLED	 8
 
 /* wacom data size per MT contact */
 #define WACOM_BYTES_PER_MT_PACKET	11
@@ -52,6 +54,7 @@
 #define WACOM_REPORT_TPC1FG		6
 #define WACOM_REPORT_TPC2FG		13
 #define WACOM_REPORT_TPCMT		13
+#define WACOM_REPORT_TPCMT2		3
 #define WACOM_REPORT_TPCHID		15
 #define WACOM_REPORT_TPCST		16
 #define WACOM_REPORT_DTUS		17
@@ -105,6 +108,7 @@ enum {
 	TABLETPC2FG,
 	MTSCREEN,
 	MTTPC,
+	MTTPC_B,
 	MAX_TYPE
 };
 
@@ -118,6 +122,8 @@ struct wacom_features {
 	int type;
 	int x_resolution;
 	int y_resolution;
+	int x_min;
+	int y_min;
 	int device_type;
 	int x_phy;
 	int y_phy;

drivers/input/touchscreen/88pm860x-ts.c

@@ -16,6 +16,7 @@
 #include <linux/input.h>
 #include <linux/mfd/88pm860x.h>
 #include <linux/slab.h>
+#include <linux/device.h>
 
 #define MEAS_LEN		(8)
 #define ACCURATE_BIT		(12)
@@ -234,16 +235,17 @@ static int pm860x_touch_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL);
-	if (touch == NULL)
+	touch = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_touch),
+			     GFP_KERNEL);
+	if (!touch)
 		return -ENOMEM;
+
 	platform_set_drvdata(pdev, touch);
 
-	touch->idev = input_allocate_device();
-	if (touch->idev == NULL) {
+	touch->idev = devm_input_allocate_device(&pdev->dev);
+	if (!touch->idev) {
 		dev_err(&pdev->dev, "Failed to allocate input device!\n");
-		ret = -ENOMEM;
-		goto out;
+		return -ENOMEM;
 	}
 
 	touch->idev->name = "88pm860x-touch";
@@ -258,10 +260,11 @@ static int pm860x_touch_probe(struct platform_device *pdev)
 	touch->res_x = res_x;
 	input_set_drvdata(touch->idev, touch);
 
-	ret = request_threaded_irq(touch->irq, NULL, pm860x_touch_handler,
-				   IRQF_ONESHOT, "touch", touch);
+	ret = devm_request_threaded_irq(&pdev->dev, touch->irq, NULL,
+					pm860x_touch_handler, IRQF_ONESHOT,
+					"touch", touch);
 	if (ret < 0)
-		goto out_irq;
+		return ret;
 
 	__set_bit(EV_ABS, touch->idev->evbit);
 	__set_bit(ABS_X, touch->idev->absbit);
@@ -279,28 +282,11 @@ static int pm860x_touch_probe(struct platform_device *pdev)
 	ret = input_register_device(touch->idev);
 	if (ret < 0) {
 		dev_err(chip->dev, "Failed to register touch!\n");
-		goto out_rg;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, touch);
 	return 0;
-out_rg:
-	free_irq(touch->irq, touch);
-out_irq:
-	input_free_device(touch->idev);
-out:
-	kfree(touch);
-	return ret;
-}
-
-static int pm860x_touch_remove(struct platform_device *pdev)
-{
-	struct pm860x_touch *touch = platform_get_drvdata(pdev);
-
-	input_unregister_device(touch->idev);
-	free_irq(touch->irq, touch);
-	kfree(touch);
-	return 0;
 }
 
 static struct platform_driver pm860x_touch_driver = {
@@ -309,7 +295,6 @@ static struct platform_driver pm860x_touch_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe	= pm860x_touch_probe,
-	.remove	= pm860x_touch_remove,
 };
 module_platform_driver(pm860x_touch_driver);
 

drivers/input/touchscreen/Kconfig

@@ -11,6 +11,10 @@ menuconfig INPUT_TOUCHSCREEN
 
 if INPUT_TOUCHSCREEN
 
+config OF_TOUCHSCREEN
+	def_tristate INPUT
+	depends on INPUT && OF
+
 config TOUCHSCREEN_88PM860X
 	tristate "Marvell 88PM860x touchscreen"
 	depends on MFD_88PM860X
@@ -89,6 +93,7 @@ config TOUCHSCREEN_AD7879_SPI
 config TOUCHSCREEN_ATMEL_MXT
 	tristate "Atmel mXT I2C Touchscreen"
 	depends on I2C
+	select FW_LOADER
 	help
 	  Say Y here if you have Atmel mXT series I2C touchscreen,
 	  such as AT42QT602240/ATMXT224, connected to your system.
@@ -846,7 +851,7 @@ config TOUCHSCREEN_TSC2007
 
 config TOUCHSCREEN_W90X900
 	tristate "W90P910 touchscreen driver"
-	depends on HAVE_CLK
+	depends on ARCH_W90X900
 	help
 	  Say Y here if you have a W90P910 based touchscreen.
 
@@ -885,6 +890,17 @@ config TOUCHSCREEN_STMPE
 	  To compile this driver as a module, choose M here: the
 	  module will be called stmpe-ts.
 
+config TOUCHSCREEN_SUN4I
+	tristate "Allwinner sun4i resistive touchscreen controller support"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on HWMON
+	help
+	  This selects support for the resistive touchscreen controller
+	  found on Allwinner sunxi SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun4i-ts.
+
 config TOUCHSCREEN_SUR40
 	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
 	depends on USB

drivers/input/touchscreen/Makefile

@@ -6,6 +6,7 @@
 
 wm97xx-ts-y := wm97xx-core.o
 
+obj-$(CONFIG_OF_TOUCHSCREEN)		+= of_touchscreen.o
 obj-$(CONFIG_TOUCHSCREEN_88PM860X)	+= 88pm860x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_AD7877)	+= ad7877.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879)	+= ad7879.o
@@ -53,6 +54,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR)	+= pixcir_i2c_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
+obj-$(CONFIG_TOUCHSCREEN_SUN4I)		+= sun4i-ts.o
 obj-$(CONFIG_TOUCHSCREEN_SUR40)		+= sur40.o
 obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC)	+= ti_am335x_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o

drivers/input/touchscreen/ad7877.c

@@ -210,11 +210,6 @@ static bool gpio3;
 module_param(gpio3, bool, 0);
 MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3");
 
-/*
- * ad7877_read/write are only used for initial setup and for sysfs controls.
- * The main traffic is done using spi_async() in the interrupt handler.
- */
-
 static int ad7877_read(struct spi_device *spi, u16 reg)
 {
 	struct ser_req *req;

drivers/input/touchscreen/ads7846.c

@@ -706,7 +706,7 @@ static void ads7846_read_state(struct ads7846 *ts)
 		m = &ts->msg[msg_idx];
 		error = spi_sync(ts->spi, m);
 		if (error) {
-			dev_err(&ts->spi->dev, "spi_async --> %d\n", error);
+			dev_err(&ts->spi->dev, "spi_sync --> %d\n", error);
 			packet->tc.ignore = true;
 			return;
 		}

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -2,6 +2,8 @@
  * Atmel maXTouch Touchscreen driver
  *
  * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Copyright (C) 2012 Google, Inc.
+ *
  * Author: Joonyoung Shim <jy0922.shim@samsung.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -12,6 +14,8 @@
  */
 
 #include <linux/module.h>
+#include <linux/init.h>
+#include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
@@ -25,12 +29,6 @@
 #define MXT_VER_21		21
 #define MXT_VER_22		22
 
-/* Slave addresses */
-#define MXT_APP_LOW		0x4a
-#define MXT_APP_HIGH		0x4b
-#define MXT_BOOT_LOW		0x24
-#define MXT_BOOT_HIGH		0x25
-
 /* Firmware */
 #define MXT_FW_NAME		"maxtouch.fw"
 
@@ -83,6 +81,9 @@
 #define MXT_COMMAND_REPORTALL	3
 #define MXT_COMMAND_DIAGNOSTIC	5
 
+/* Define for T6 status byte */
+#define MXT_T6_STATUS_RESET	(1 << 7)
+
 /* MXT_GEN_POWER_T7 field */
 #define MXT_POWER_IDLEACQINT	0
 #define MXT_POWER_ACTVACQINT	1
@@ -99,33 +100,26 @@
 
 /* MXT_TOUCH_MULTI_T9 field */
 #define MXT_TOUCH_CTRL		0
-#define MXT_TOUCH_XORIGIN	1
-#define MXT_TOUCH_YORIGIN	2
-#define MXT_TOUCH_XSIZE		3
-#define MXT_TOUCH_YSIZE		4
-#define MXT_TOUCH_BLEN		6
-#define MXT_TOUCH_TCHTHR	7
-#define MXT_TOUCH_TCHDI		8
-#define MXT_TOUCH_ORIENT	9
-#define MXT_TOUCH_MOVHYSTI	11
-#define MXT_TOUCH_MOVHYSTN	12
-#define MXT_TOUCH_NUMTOUCH	14
-#define MXT_TOUCH_MRGHYST	15
-#define MXT_TOUCH_MRGTHR	16
-#define MXT_TOUCH_AMPHYST	17
-#define MXT_TOUCH_XRANGE_LSB	18
-#define MXT_TOUCH_XRANGE_MSB	19
-#define MXT_TOUCH_YRANGE_LSB	20
-#define MXT_TOUCH_YRANGE_MSB	21
-#define MXT_TOUCH_XLOCLIP	22
-#define MXT_TOUCH_XHICLIP	23
-#define MXT_TOUCH_YLOCLIP	24
-#define MXT_TOUCH_YHICLIP	25
-#define MXT_TOUCH_XEDGECTRL	26
-#define MXT_TOUCH_XEDGEDIST	27
-#define MXT_TOUCH_YEDGECTRL	28
-#define MXT_TOUCH_YEDGEDIST	29
-#define MXT_TOUCH_JUMPLIMIT	30
+#define MXT_T9_ORIENT		9
+#define MXT_T9_RANGE		18
+
+/* MXT_TOUCH_MULTI_T9 status */
+#define MXT_T9_UNGRIP		(1 << 0)
+#define MXT_T9_SUPPRESS		(1 << 1)
+#define MXT_T9_AMP		(1 << 2)
+#define MXT_T9_VECTOR		(1 << 3)
+#define MXT_T9_MOVE		(1 << 4)
+#define MXT_T9_RELEASE		(1 << 5)
+#define MXT_T9_PRESS		(1 << 6)
+#define MXT_T9_DETECT		(1 << 7)
+
+struct t9_range {
+	u16 x;
+	u16 y;
+} __packed;
+
+/* MXT_TOUCH_MULTI_T9 orient */
+#define MXT_T9_ORIENT_SWITCH	(1 << 0)
 
 /* MXT_PROCI_GRIPFACE_T20 field */
 #define MXT_GRIPFACE_CTRL	0
@@ -174,17 +168,16 @@
 
 /* Define for MXT_GEN_COMMAND_T6 */
 #define MXT_BOOT_VALUE		0xa5
+#define MXT_RESET_VALUE		0x01
 #define MXT_BACKUP_VALUE	0x55
+
+/* Delay times */
 #define MXT_BACKUP_TIME		50	/* msec */
 #define MXT_RESET_TIME		200	/* msec */
-
-#define MXT_FWRESET_TIME	175	/* msec */
-
-/* MXT_SPT_GPIOPWM_T19 field */
-#define MXT_GPIO0_MASK		0x04
-#define MXT_GPIO1_MASK		0x08
-#define MXT_GPIO2_MASK		0x10
-#define MXT_GPIO3_MASK		0x20
+#define MXT_RESET_TIMEOUT	3000	/* msec */
+#define MXT_CRC_TIMEOUT		1000	/* msec */
+#define MXT_FW_RESET_TIME	3000	/* msec */
+#define MXT_FW_CHG_TIMEOUT	300	/* msec */
 
 /* Command to unlock bootloader */
 #define MXT_UNLOCK_CMD_MSB	0xaa
@@ -198,21 +191,8 @@
 #define MXT_FRAME_CRC_PASS	0x04
 #define MXT_APP_CRC_FAIL	0x40	/* valid 7 8 bit only */
 #define MXT_BOOT_STATUS_MASK	0x3f
-
-/* Touch status */
-#define MXT_UNGRIP		(1 << 0)
-#define MXT_SUPPRESS		(1 << 1)
-#define MXT_AMP			(1 << 2)
-#define MXT_VECTOR		(1 << 3)
-#define MXT_MOVE		(1 << 4)
-#define MXT_RELEASE		(1 << 5)
-#define MXT_PRESS		(1 << 6)
-#define MXT_DETECT		(1 << 7)
-
-/* Touch orient bits */
-#define MXT_XY_SWITCH		(1 << 0)
-#define MXT_X_INVERT		(1 << 1)
-#define MXT_Y_INVERT		(1 << 2)
+#define MXT_BOOT_EXTENDED_ID	(1 << 5)
+#define MXT_BOOT_ID_MASK	0x1f
 
 /* Touchscreen absolute values */
 #define MXT_MAX_AREA		0xff
@@ -232,8 +212,8 @@ struct mxt_info {
 struct mxt_object {
 	u8 type;
 	u16 start_address;
-	u8 size;		/* Size of each instance - 1 */
-	u8 instances;		/* Number of instances - 1 */
+	u8 size_minus_one;
+	u8 instances_minus_one;
 	u8 num_report_ids;
 } __packed;
 
@@ -250,19 +230,40 @@ struct mxt_data {
 	const struct mxt_platform_data *pdata;
 	struct mxt_object *object_table;
 	struct mxt_info info;
-	bool is_tp;
-
 	unsigned int irq;
 	unsigned int max_x;
 	unsigned int max_y;
+	bool in_bootloader;
+	u32 config_crc;
+	u8 bootloader_addr;
 
 	/* Cached parameters from object table */
 	u8 T6_reportid;
+	u16 T6_address;
 	u8 T9_reportid_min;
 	u8 T9_reportid_max;
 	u8 T19_reportid;
+
+	/* for fw update in bootloader */
+	struct completion bl_completion;
+
+	/* for reset handling */
+	struct completion reset_completion;
+
+	/* for config update handling */
+	struct completion crc_completion;
 };
 
+static size_t mxt_obj_size(const struct mxt_object *obj)
+{
+	return obj->size_minus_one + 1;
+}
+
+static size_t mxt_obj_instances(const struct mxt_object *obj)
+{
+	return obj->instances_minus_one + 1;
+}
+
 static bool mxt_object_readable(unsigned int type)
 {
 	switch (type) {
@@ -334,60 +335,190 @@ static void mxt_dump_message(struct device *dev,
 		message->reportid, 7, message->message);
 }
 
-static int mxt_check_bootloader(struct i2c_client *client,
-				     unsigned int state)
+static int mxt_wait_for_completion(struct mxt_data *data,
+				   struct completion *comp,
+				   unsigned int timeout_ms)
+{
+	struct device *dev = &data->client->dev;
+	unsigned long timeout = msecs_to_jiffies(timeout_ms);
+	long ret;
+
+	ret = wait_for_completion_interruptible_timeout(comp, timeout);
+	if (ret < 0) {
+		return ret;
+	} else if (ret == 0) {
+		dev_err(dev, "Wait for completion timed out.\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int mxt_bootloader_read(struct mxt_data *data,
+			       u8 *val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.flags |= I2C_M_RD;
+	msg.len = count;
+	msg.buf = val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_bootloader_write(struct mxt_data *data,
+				const u8 * const val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.len = count;
+	msg.buf = (u8 *)val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_lookup_bootloader_address(struct mxt_data *data)
+{
+	u8 appmode = data->client->addr;
+	u8 bootloader;
+
+	switch (appmode) {
+	case 0x4a:
+	case 0x4b:
+	case 0x4c:
+	case 0x4d:
+	case 0x5a:
+	case 0x5b:
+		bootloader = appmode - 0x26;
+		break;
+	default:
+		dev_err(&data->client->dev,
+			"Appmode i2c address 0x%02x not found\n",
+			appmode);
+		return -EINVAL;
+	}
+
+	data->bootloader_addr = bootloader;
+	return 0;
+}
+
+static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
+{
+	struct device *dev = &data->client->dev;
+	u8 buf[3];
+
+	if (val & MXT_BOOT_EXTENDED_ID) {
+		if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
+			dev_err(dev, "%s: i2c failure\n", __func__);
+			return val;
+		}
+
+		dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
+
+		return buf[0];
+	} else {
+		dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
+
+		return val;
+	}
+}
+
+static int mxt_check_bootloader(struct mxt_data *data, unsigned int state)
 {
+	struct device *dev = &data->client->dev;
 	u8 val;
+	int ret;
 
 recheck:
-	if (i2c_master_recv(client, &val, 1) != 1) {
-		dev_err(&client->dev, "%s: i2c recv failed\n", __func__);
-		return -EIO;
+	if (state != MXT_WAITING_BOOTLOAD_CMD) {
+		/*
+		 * In application update mode, the interrupt
+		 * line signals state transitions. We must wait for the
+		 * CHG assertion before reading the status byte.
+		 * Once the status byte has been read, the line is deasserted.
+		 */
+		ret = mxt_wait_for_completion(data, &data->bl_completion,
+					      MXT_FW_CHG_TIMEOUT);
+		if (ret) {
+			/*
+			 * TODO: handle -ERESTARTSYS better by terminating
+			 * fw update process before returning to userspace
+			 * by writing length 0x000 to device (iff we are in
+			 * WAITING_FRAME_DATA state).
+			 */
+			dev_err(dev, "Update wait error %d\n", ret);
+			return ret;
+		}
 	}
 
+	ret = mxt_bootloader_read(data, &val, 1);
+	if (ret)
+		return ret;
+
+	if (state == MXT_WAITING_BOOTLOAD_CMD)
+		val = mxt_get_bootloader_version(data, val);
+
 	switch (state) {
 	case MXT_WAITING_BOOTLOAD_CMD:
 	case MXT_WAITING_FRAME_DATA:
 		val &= ~MXT_BOOT_STATUS_MASK;
 		break;
 	case MXT_FRAME_CRC_PASS:
-		if (val == MXT_FRAME_CRC_CHECK)
+		if (val == MXT_FRAME_CRC_CHECK) {
 			goto recheck;
+		} else if (val == MXT_FRAME_CRC_FAIL) {
+			dev_err(dev, "Bootloader CRC fail\n");
+			return -EINVAL;
+		}
 		break;
 	default:
 		return -EINVAL;
 	}
 
 	if (val != state) {
-		dev_err(&client->dev, "Unvalid bootloader mode state\n");
+		dev_err(dev, "Invalid bootloader state %02X != %02X\n",
+			val, state);
 		return -EINVAL;
 	}
 
 	return 0;
 }
 
-static int mxt_unlock_bootloader(struct i2c_client *client)
+static int mxt_unlock_bootloader(struct mxt_data *data)
 {
+	int ret;
 	u8 buf[2];
 
 	buf[0] = MXT_UNLOCK_CMD_LSB;
 	buf[1] = MXT_UNLOCK_CMD_MSB;
 
-	if (i2c_master_send(client, buf, 2) != 2) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int mxt_fw_write(struct i2c_client *client,
-			     const u8 *data, unsigned int frame_size)
-{
-	if (i2c_master_send(client, data, frame_size) != frame_size) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
-	}
+	ret = mxt_bootloader_write(data, buf, 2);
+	if (ret)
+		return ret;
 
 	return 0;
 }
@@ -427,11 +558,6 @@ static int __mxt_read_reg(struct i2c_client *client,
 	return ret;
 }
 
-static int mxt_read_reg(struct i2c_client *client, u16 reg, u8 *val)
-{
-	return __mxt_read_reg(client, reg, 1, val);
-}
-
 static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
 			   const void *val)
 {
@@ -479,7 +605,7 @@ mxt_get_object(struct mxt_data *data, u8 type)
 			return object;
 	}
 
-	dev_err(&data->client->dev, "Invalid object type\n");
+	dev_err(&data->client->dev, "Invalid object type T%u\n", type);
 	return NULL;
 }
 
@@ -505,7 +631,7 @@ static int mxt_write_object(struct mxt_data *data,
 	u16 reg;
 
 	object = mxt_get_object(data, type);
-	if (!object || offset >= object->size + 1)
+	if (!object || offset >= mxt_obj_size(object))
 		return -EINVAL;
 
 	reg = object->start_address;
@@ -515,18 +641,25 @@ static int mxt_write_object(struct mxt_data *data,
 static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
 {
 	struct input_dev *input = data->input_dev;
+	const struct mxt_platform_data *pdata = data->pdata;
 	bool button;
 	int i;
 
 	/* Active-low switch */
-	for (i = 0; i < MXT_NUM_GPIO; i++) {
-		if (data->pdata->key_map[i] == KEY_RESERVED)
+	for (i = 0; i < pdata->t19_num_keys; i++) {
+		if (pdata->t19_keymap[i] == KEY_RESERVED)
 			continue;
-		button = !(message->message[0] & MXT_GPIO0_MASK << i);
-		input_report_key(input, data->pdata->key_map[i], button);
+		button = !(message->message[0] & (1 << i));
+		input_report_key(input, pdata->t19_keymap[i], button);
 	}
 }
 
+static void mxt_input_sync(struct input_dev *input_dev)
+{
+	input_mt_report_pointer_emulation(input_dev, false);
+	input_sync(input_dev);
+}
+
 static void mxt_input_touchevent(struct mxt_data *data,
 				      struct mxt_message *message, int id)
 {
@@ -536,44 +669,60 @@ static void mxt_input_touchevent(struct mxt_data *data,
 	int x;
 	int y;
 	int area;
-	int pressure;
+	int amplitude;
 
 	x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf);
 	y = (message->message[2] << 4) | ((message->message[3] & 0xf));
+
+	/* Handle 10/12 bit switching */
 	if (data->max_x < 1024)
-		x = x >> 2;
+		x >>= 2;
 	if (data->max_y < 1024)
-		y = y >> 2;
+		y >>= 2;
 
 	area = message->message[4];
-	pressure = message->message[5];
+	amplitude = message->message[5];
 
 	dev_dbg(dev,
 		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
 		id,
-		(status & MXT_DETECT) ? 'D' : '.',
-		(status & MXT_PRESS) ? 'P' : '.',
-		(status & MXT_RELEASE) ? 'R' : '.',
-		(status & MXT_MOVE) ? 'M' : '.',
-		(status & MXT_VECTOR) ? 'V' : '.',
-		(status & MXT_AMP) ? 'A' : '.',
-		(status & MXT_SUPPRESS) ? 'S' : '.',
-		(status & MXT_UNGRIP) ? 'U' : '.',
-		x, y, area, pressure);
+		(status & MXT_T9_DETECT) ? 'D' : '.',
+		(status & MXT_T9_PRESS) ? 'P' : '.',
+		(status & MXT_T9_RELEASE) ? 'R' : '.',
+		(status & MXT_T9_MOVE) ? 'M' : '.',
+		(status & MXT_T9_VECTOR) ? 'V' : '.',
+		(status & MXT_T9_AMP) ? 'A' : '.',
+		(status & MXT_T9_SUPPRESS) ? 'S' : '.',
+		(status & MXT_T9_UNGRIP) ? 'U' : '.',
+		x, y, area, amplitude);
 
 	input_mt_slot(input_dev, id);
-	input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
-				   status & MXT_DETECT);
 
-	if (status & MXT_DETECT) {
+	if (status & MXT_T9_DETECT) {
+		/*
+		 * Multiple bits may be set if the host is slow to read
+		 * the status messages, indicating all the events that
+		 * have happened.
+		 */
+		if (status & MXT_T9_RELEASE) {
+			input_mt_report_slot_state(input_dev,
+						   MT_TOOL_FINGER, 0);
+			mxt_input_sync(input_dev);
+		}
+
+		/* Touch active */
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
 		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
 		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
-		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
 		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
+	} else {
+		/* Touch no longer active, close out slot */
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
 	}
 }
 
-static unsigned mxt_extract_T6_csum(const u8 *csum)
+static u16 mxt_extract_T6_csum(const u8 *csum)
 {
 	return csum[0] | (csum[1] << 8) | (csum[2] << 16);
 }
@@ -584,28 +733,37 @@ static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg)
 	return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
 }
 
-static irqreturn_t mxt_interrupt(int irq, void *dev_id)
+static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
 {
-	struct mxt_data *data = dev_id;
 	struct mxt_message message;
 	const u8 *payload = &message.message[0];
 	struct device *dev = &data->client->dev;
 	u8 reportid;
 	bool update_input = false;
+	u32 crc;
 
 	do {
 		if (mxt_read_message(data, &message)) {
 			dev_err(dev, "Failed to read message\n");
-			goto end;
+			return IRQ_NONE;
 		}
 
 		reportid = message.reportid;
 
 		if (reportid == data->T6_reportid) {
 			u8 status = payload[0];
-			unsigned csum = mxt_extract_T6_csum(&payload[1]);
+
+			crc = mxt_extract_T6_csum(&payload[1]);
+			if (crc != data->config_crc) {
+				data->config_crc = crc;
+				complete(&data->crc_completion);
+			}
+
 			dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
-				status, csum);
+				status, data->config_crc);
+
+			if (status & MXT_T6_STATUS_RESET)
+				complete(&data->reset_completion);
 		} else if (mxt_is_T9_message(data, &message)) {
 			int id = reportid - data->T9_reportid_min;
 			mxt_input_touchevent(data, &message, id);
@@ -618,15 +776,96 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 		}
 	} while (reportid != 0xff);
 
-	if (update_input) {
-		input_mt_report_pointer_emulation(data->input_dev, false);
-		input_sync(data->input_dev);
-	}
+	if (update_input)
+		mxt_input_sync(data->input_dev);
 
-end:
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t mxt_interrupt(int irq, void *dev_id)
+{
+	struct mxt_data *data = dev_id;
+
+	if (data->in_bootloader) {
+		/* bootloader state transition completion */
+		complete(&data->bl_completion);
+		return IRQ_HANDLED;
+	}
+
+	return mxt_process_messages_until_invalid(data);
+}
+
+static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
+			  u8 value, bool wait)
+{
+	u16 reg;
+	u8 command_register;
+	int timeout_counter = 0;
+	int ret;
+
+	reg = data->T6_address + cmd_offset;
+
+	ret = mxt_write_reg(data->client, reg, value);
+	if (ret)
+		return ret;
+
+	if (!wait)
+		return 0;
+
+	do {
+		msleep(20);
+		ret = __mxt_read_reg(data->client, reg, 1, &command_register);
+		if (ret)
+			return ret;
+	} while (command_register != 0 && timeout_counter++ <= 100);
+
+	if (timeout_counter > 100) {
+		dev_err(&data->client->dev, "Command failed!\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mxt_soft_reset(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret = 0;
+
+	dev_info(dev, "Resetting chip\n");
+
+	reinit_completion(&data->reset_completion);
+
+	ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
+	if (ret)
+		return ret;
+
+	ret = mxt_wait_for_completion(data, &data->reset_completion,
+				      MXT_RESET_TIMEOUT);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
+{
+	/*
+	 * On failure, CRC is set to 0 and config will always be
+	 * downloaded.
+	 */
+	data->config_crc = 0;
+	reinit_completion(&data->crc_completion);
+
+	mxt_t6_command(data, cmd, value, true);
+
+	/*
+	 * Wait for crc message. On failure, CRC is set to 0 and config will
+	 * always be downloaded.
+	 */
+	mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
+}
+
 static int mxt_check_reg_init(struct mxt_data *data)
 {
 	const struct mxt_platform_data *pdata = data->pdata;
@@ -641,13 +880,23 @@ static int mxt_check_reg_init(struct mxt_data *data)
 		return 0;
 	}
 
+	mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
+
+	if (data->config_crc == pdata->config_crc) {
+		dev_info(dev, "Config CRC 0x%06X: OK\n", data->config_crc);
+		return 0;
+	}
+
+	dev_info(dev, "Config CRC 0x%06X: does not match 0x%06X\n",
+		 data->config_crc, pdata->config_crc);
+
 	for (i = 0; i < data->info.object_num; i++) {
 		object = data->object_table + i;
 
 		if (!mxt_object_writable(object->type))
 			continue;
 
-		size = (object->size + 1) * (object->instances + 1);
+		size = mxt_obj_size(object) * mxt_obj_instances(object);
 		if (index + size > pdata->config_length) {
 			dev_err(dev, "Not enough config data!\n");
 			return -EINVAL;
@@ -660,6 +909,14 @@ static int mxt_check_reg_init(struct mxt_data *data)
 		index += size;
 	}
 
+	mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
+
+	ret = mxt_soft_reset(data);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "Config successfully updated\n");
+
 	return 0;
 }
 
@@ -685,54 +942,6 @@ static int mxt_make_highchg(struct mxt_data *data)
 	return 0;
 }
 
-static void mxt_handle_pdata(struct mxt_data *data)
-{
-	const struct mxt_platform_data *pdata = data->pdata;
-	u8 voltage;
-
-	/* Set touchscreen lines */
-	mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_XSIZE,
-			pdata->x_line);
-	mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_YSIZE,
-			pdata->y_line);
-
-	/* Set touchscreen orient */
-	mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_ORIENT,
-			pdata->orient);
-
-	/* Set touchscreen burst length */
-	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
-			MXT_TOUCH_BLEN, pdata->blen);
-
-	/* Set touchscreen threshold */
-	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
-			MXT_TOUCH_TCHTHR, pdata->threshold);
-
-	/* Set touchscreen resolution */
-	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
-			MXT_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff);
-	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
-			MXT_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8);
-	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
-			MXT_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff);
-	mxt_write_object(data, MXT_TOUCH_MULTI_T9,
-			MXT_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8);
-
-	/* Set touchscreen voltage */
-	if (pdata->voltage) {
-		if (pdata->voltage < MXT_VOLTAGE_DEFAULT) {
-			voltage = (MXT_VOLTAGE_DEFAULT - pdata->voltage) /
-				MXT_VOLTAGE_STEP;
-			voltage = 0xff - voltage + 1;
-		} else
-			voltage = (pdata->voltage - MXT_VOLTAGE_DEFAULT) /
-				MXT_VOLTAGE_STEP;
-
-		mxt_write_object(data, MXT_SPT_CTECONFIG_T28,
-				MXT_CTE_VOLTAGE, voltage);
-	}
-}
-
 static int mxt_get_info(struct mxt_data *data)
 {
 	struct i2c_client *client = data->client;
@@ -772,7 +981,7 @@ static int mxt_get_object_table(struct mxt_data *data)
 		if (object->num_report_ids) {
 			min_id = reportid;
 			reportid += object->num_report_ids *
-					(object->instances + 1);
+					mxt_obj_instances(object);
 			max_id = reportid - 1;
 		} else {
 			min_id = 0;
@@ -780,13 +989,15 @@ static int mxt_get_object_table(struct mxt_data *data)
 		}
 
 		dev_dbg(&data->client->dev,
-			"Type %2d Start %3d Size %3d Instances %2d ReportIDs %3u : %3u\n",
-			object->type, object->start_address, object->size + 1,
-			object->instances + 1, min_id, max_id);
+			"T%u Start:%u Size:%zu Instances:%zu Report IDs:%u-%u\n",
+			object->type, object->start_address,
+			mxt_obj_size(object), mxt_obj_instances(object),
+			min_id, max_id);
 
 		switch (object->type) {
 		case MXT_GEN_COMMAND_T6:
 			data->T6_reportid = min_id;
+			data->T6_address = object->start_address;
 			break;
 		case MXT_TOUCH_MULTI_T9:
 			data->T9_reportid_min = min_id;
@@ -811,12 +1022,59 @@ static void mxt_free_object_table(struct mxt_data *data)
 	data->T19_reportid = 0;
 }
 
+static int mxt_read_t9_resolution(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	struct t9_range range;
+	unsigned char orient;
+	struct mxt_object *object;
+
+	object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
+	if (!object)
+		return -EINVAL;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T9_RANGE,
+			       sizeof(range), &range);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range.x);
+	le16_to_cpus(&range.y);
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T9_ORIENT,
+				1, &orient);
+	if (error)
+		return error;
+
+	/* Handle default values */
+	if (range.x == 0)
+		range.x = 1023;
+
+	if (range.y == 0)
+		range.y = 1023;
+
+	if (orient & MXT_T9_ORIENT_SWITCH) {
+		data->max_x = range.y;
+		data->max_y = range.x;
+	} else {
+		data->max_x = range.x;
+		data->max_y = range.y;
+	}
+
+	dev_dbg(&client->dev,
+		"Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+	return 0;
+}
+
 static int mxt_initialize(struct mxt_data *data)
 {
 	struct i2c_client *client = data->client;
 	struct mxt_info *info = &data->info;
 	int error;
-	u8 val;
 
 	error = mxt_get_info(data);
 	if (error)
@@ -832,47 +1090,29 @@ static int mxt_initialize(struct mxt_data *data)
 
 	/* Get object table information */
 	error = mxt_get_object_table(data);
-	if (error)
+	if (error) {
+		dev_err(&client->dev, "Error %d reading object table\n", error);
 		goto err_free_object_table;
+	}
 
 	/* Check register init values */
 	error = mxt_check_reg_init(data);
-	if (error)
-		goto err_free_object_table;
-
-	mxt_handle_pdata(data);
-
-	/* Backup to memory */
-	mxt_write_object(data, MXT_GEN_COMMAND_T6,
-			MXT_COMMAND_BACKUPNV,
-			MXT_BACKUP_VALUE);
-	msleep(MXT_BACKUP_TIME);
-
-	/* Soft reset */
-	mxt_write_object(data, MXT_GEN_COMMAND_T6,
-			MXT_COMMAND_RESET, 1);
-	msleep(MXT_RESET_TIME);
-
-	/* Update matrix size at info struct */
-	error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val);
-	if (error)
+	if (error) {
+		dev_err(&client->dev, "Error %d initializing configuration\n",
+			error);
 		goto err_free_object_table;
-	info->matrix_xsize = val;
+	}
 
-	error = mxt_read_reg(client, MXT_MATRIX_Y_SIZE, &val);
-	if (error)
+	error = mxt_read_t9_resolution(data);
+	if (error) {
+		dev_err(&client->dev, "Failed to initialize T9 resolution\n");
 		goto err_free_object_table;
-	info->matrix_ysize = val;
-
-	dev_info(&client->dev,
-			"Family ID: %u Variant ID: %u Major.Minor.Build: %u.%u.%02X\n",
-			info->family_id, info->variant_id, info->version >> 4,
-			info->version & 0xf, info->build);
+	}
 
 	dev_info(&client->dev,
-			"Matrix X Size: %u Matrix Y Size: %u Object Num: %u\n",
-			info->matrix_xsize, info->matrix_ysize,
-			info->object_num);
+		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
+		 info->family_id, info->variant_id, info->version >> 4,
+		 info->version & 0xf, info->build, info->object_num);
 
 	return 0;
 
@@ -881,20 +1121,6 @@ static int mxt_initialize(struct mxt_data *data)
 	return error;
 }
 
-static void mxt_calc_resolution(struct mxt_data *data)
-{
-	unsigned int max_x = data->pdata->x_size - 1;
-	unsigned int max_y = data->pdata->y_size - 1;
-
-	if (data->pdata->orient & MXT_XY_SWITCH) {
-		data->max_x = max_y;
-		data->max_y = max_x;
-	} else {
-		data->max_x = max_x;
-		data->max_y = max_y;
-	}
-}
-
 /* Firmware Version is returned as Major.Minor.Build */
 static ssize_t mxt_fw_version_show(struct device *dev,
 				   struct device_attribute *attr, char *buf)
@@ -921,11 +1147,11 @@ static ssize_t mxt_show_instance(char *buf, int count,
 {
 	int i;
 
-	if (object->instances > 0)
+	if (mxt_obj_instances(object) > 1)
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Instance %u\n", instance);
 
-	for (i = 0; i < object->size + 1; i++)
+	for (i = 0; i < mxt_obj_size(object); i++)
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
 	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
@@ -958,8 +1184,8 @@ static ssize_t mxt_object_show(struct device *dev,
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				"T%u:\n", object->type);
 
-		for (j = 0; j < object->instances + 1; j++) {
-			u16 size = object->size + 1;
+		for (j = 0; j < mxt_obj_instances(object); j++) {
+			u16 size = mxt_obj_size(object);
 			u16 addr = object->start_address + j * size;
 
 			error = __mxt_read_reg(data->client, addr, size, obuf);
@@ -975,13 +1201,38 @@ static ssize_t mxt_object_show(struct device *dev,
 	return error ?: count;
 }
 
+static int mxt_check_firmware_format(struct device *dev,
+				     const struct firmware *fw)
+{
+	unsigned int pos = 0;
+	char c;
+
+	while (pos < fw->size) {
+		c = *(fw->data + pos);
+
+		if (c < '0' || (c > '9' && c < 'A') || c > 'F')
+			return 0;
+
+		pos++;
+	}
+
+	/*
+	 * To convert file try:
+	 * xxd -r -p mXTXXX__APP_VX-X-XX.enc > maxtouch.fw
+	 */
+	dev_err(dev, "Aborting: firmware file must be in binary format\n");
+
+	return -EINVAL;
+}
+
 static int mxt_load_fw(struct device *dev, const char *fn)
 {
 	struct mxt_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	const struct firmware *fw = NULL;
 	unsigned int frame_size;
 	unsigned int pos = 0;
+	unsigned int retry = 0;
+	unsigned int frame = 0;
 	int ret;
 
 	ret = request_firmware(&fw, fn, dev);
@@ -990,59 +1241,91 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		return ret;
 	}
 
+	/* Check for incorrect enc file */
+	ret = mxt_check_firmware_format(dev, fw);
+	if (ret)
+		goto release_firmware;
+
+	ret = mxt_lookup_bootloader_address(data);
+	if (ret)
+		goto release_firmware;
+
 	/* Change to the bootloader mode */
-	mxt_write_object(data, MXT_GEN_COMMAND_T6,
-			MXT_COMMAND_RESET, MXT_BOOT_VALUE);
+	data->in_bootloader = true;
+
+	ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_BOOT_VALUE, false);
+	if (ret)
+		goto release_firmware;
+
 	msleep(MXT_RESET_TIME);
 
-	/* Change to slave address of bootloader */
-	if (client->addr == MXT_APP_LOW)
-		client->addr = MXT_BOOT_LOW;
-	else
-		client->addr = MXT_BOOT_HIGH;
+	reinit_completion(&data->bl_completion);
 
-	ret = mxt_check_bootloader(client, MXT_WAITING_BOOTLOAD_CMD);
+	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD);
 	if (ret)
-		goto out;
+		goto disable_irq;
 
 	/* Unlock bootloader */
-	mxt_unlock_bootloader(client);
+	mxt_unlock_bootloader(data);
 
 	while (pos < fw->size) {
-		ret = mxt_check_bootloader(client,
-						MXT_WAITING_FRAME_DATA);
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA);
 		if (ret)
-			goto out;
+			goto disable_irq;
 
 		frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
 
-		/* We should add 2 at frame size as the the firmware data is not
-		 * included the CRC bytes.
-		 */
+		/* Take account of CRC bytes */
 		frame_size += 2;
 
 		/* Write one frame to device */
-		mxt_fw_write(client, fw->data + pos, frame_size);
-
-		ret = mxt_check_bootloader(client,
-						MXT_FRAME_CRC_PASS);
+		ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
 		if (ret)
-			goto out;
+			goto disable_irq;
 
-		pos += frame_size;
+		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS);
+		if (ret) {
+			retry++;
 
-		dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size);
+			/* Back off by 20ms per retry */
+			msleep(retry * 20);
+
+			if (retry > 20) {
+				dev_err(dev, "Retry count exceeded\n");
+				goto disable_irq;
+			}
+		} else {
+			retry = 0;
+			pos += frame_size;
+			frame++;
+		}
+
+		if (frame % 50 == 0)
+			dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
+				frame, pos, fw->size);
 	}
 
-out:
-	release_firmware(fw);
+	/* Wait for flash. */
+	ret = mxt_wait_for_completion(data, &data->bl_completion,
+				      MXT_FW_RESET_TIME);
+	if (ret)
+		goto disable_irq;
 
-	/* Change to slave address of application */
-	if (client->addr == MXT_BOOT_LOW)
-		client->addr = MXT_APP_LOW;
-	else
-		client->addr = MXT_APP_HIGH;
+	dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
 
+	/*
+	 * Wait for device to reset. Some bootloader versions do not assert
+	 * the CHG line after bootloading has finished, so ignore potential
+	 * errors.
+	 */
+	mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
+
+	data->in_bootloader = false;
+
+disable_irq:
+	disable_irq(data->irq);
+release_firmware:
+	release_firmware(fw);
 	return ret;
 }
 
@@ -1053,28 +1336,23 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 	struct mxt_data *data = dev_get_drvdata(dev);
 	int error;
 
-	disable_irq(data->irq);
-
 	error = mxt_load_fw(dev, MXT_FW_NAME);
 	if (error) {
 		dev_err(dev, "The firmware update failed(%d)\n", error);
 		count = error;
 	} else {
-		dev_dbg(dev, "The firmware update succeeded\n");
-
-		/* Wait for reset */
-		msleep(MXT_FWRESET_TIME);
+		dev_info(dev, "The firmware update succeeded\n");
 
 		mxt_free_object_table(data);
 
 		mxt_initialize(data);
-	}
 
-	enable_irq(data->irq);
+		enable_irq(data->irq);
 
-	error = mxt_make_highchg(data);
-	if (error)
-		return error;
+		error = mxt_make_highchg(data);
+		if (error)
+			return error;
+	}
 
 	return count;
 }
@@ -1134,6 +1412,8 @@ static int mxt_probe(struct i2c_client *client,
 	struct input_dev *input_dev;
 	int error;
 	unsigned int num_mt_slots;
+	unsigned int mt_flags = 0;
+	int i;
 
 	if (!pdata)
 		return -EINVAL;
@@ -1146,10 +1426,7 @@ static int mxt_probe(struct i2c_client *client,
 		goto err_free_mem;
 	}
 
-	data->is_tp = pdata && pdata->is_tp;
-
-	input_dev->name = (data->is_tp) ? "Atmel maXTouch Touchpad" :
-					  "Atmel maXTouch Touchscreen";
+	input_dev->name = "Atmel maXTouch Touchscreen";
 	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
 		 client->adapter->nr, client->addr);
 
@@ -1165,7 +1442,9 @@ static int mxt_probe(struct i2c_client *client,
 	data->pdata = pdata;
 	data->irq = client->irq;
 
-	mxt_calc_resolution(data);
+	init_completion(&data->bl_completion);
+	init_completion(&data->reset_completion);
+	init_completion(&data->crc_completion);
 
 	error = mxt_initialize(data);
 	if (error)
@@ -1175,20 +1454,15 @@ static int mxt_probe(struct i2c_client *client,
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 
-	if (data->is_tp) {
-		int i;
-		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+	if (pdata->t19_num_keys) {
 		__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
 
-		for (i = 0; i < MXT_NUM_GPIO; i++)
-			if (pdata->key_map[i] != KEY_RESERVED)
-				__set_bit(pdata->key_map[i], input_dev->keybit);
+		for (i = 0; i < pdata->t19_num_keys; i++)
+			if (pdata->t19_keymap[i] != KEY_RESERVED)
+				input_set_capability(input_dev, EV_KEY,
+						     pdata->t19_keymap[i]);
 
-		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-		__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
-		__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
-		__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
-		__set_bit(BTN_TOOL_QUINTTAP, input_dev->keybit);
+		mt_flags |= INPUT_MT_POINTER;
 
 		input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
 		input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
@@ -1196,6 +1470,8 @@ static int mxt_probe(struct i2c_client *client,
 				  MXT_PIXELS_PER_MM);
 		input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
 				  MXT_PIXELS_PER_MM);
+
+		input_dev->name = "Atmel maXTouch Touchpad";
 	}
 
 	/* For single touch */
@@ -1208,7 +1484,7 @@ static int mxt_probe(struct i2c_client *client,
 
 	/* For multi touch */
 	num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
-	error = input_mt_init_slots(input_dev, num_mt_slots, 0);
+	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
 	if (error)
 		goto err_free_object;
 	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
@@ -1236,12 +1512,18 @@ static int mxt_probe(struct i2c_client *client,
 		goto err_free_irq;
 
 	error = input_register_device(input_dev);
-	if (error)
+	if (error) {
+		dev_err(&client->dev, "Error %d registering input device\n",
+			error);
 		goto err_free_irq;
+	}
 
 	error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
-	if (error)
+	if (error) {
+		dev_err(&client->dev, "Failure %d creating sysfs group\n",
+			error);
 		goto err_unregister_device;
+	}
 
 	return 0;
 
@@ -1294,11 +1576,7 @@ static int mxt_resume(struct device *dev)
 	struct mxt_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
-	/* Soft reset */
-	mxt_write_object(data, MXT_GEN_COMMAND_T6,
-			MXT_COMMAND_RESET, 1);
-
-	msleep(MXT_RESET_TIME);
+	mxt_soft_reset(data);
 
 	mutex_lock(&input_dev->mutex);
 

drivers/input/touchscreen/auo-pixcir-ts.c

@@ -679,7 +679,7 @@ static const struct i2c_device_id auo_pixcir_idtable[] = {
 MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable);
 
 #ifdef CONFIG_OF
-static struct of_device_id auo_pixcir_ts_dt_idtable[] = {
+static const struct of_device_id auo_pixcir_ts_dt_idtable[] = {
 	{ .compatible = "auo,auo_pixcir_ts" },
 	{},
 };

drivers/input/touchscreen/da9034-ts.c

@@ -301,10 +301,11 @@ static int da9034_touch_probe(struct platform_device *pdev)
 	struct da9034_touch_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct da9034_touch *touch;
 	struct input_dev *input_dev;
-	int ret;
+	int error;
 
-	touch = kzalloc(sizeof(struct da9034_touch), GFP_KERNEL);
-	if (touch == NULL) {
+	touch = devm_kzalloc(&pdev->dev, sizeof(struct da9034_touch),
+			     GFP_KERNEL);
+	if (!touch) {
 		dev_err(&pdev->dev, "failed to allocate driver data\n");
 		return -ENOMEM;
 	}
@@ -315,18 +316,18 @@ static int da9034_touch_probe(struct platform_device *pdev)
 		touch->interval_ms	= pdata->interval_ms;
 		touch->x_inverted	= pdata->x_inverted;
 		touch->y_inverted	= pdata->y_inverted;
-	} else
+	} else {
 		/* fallback into default */
 		touch->interval_ms	= 10;
+	}
 
 	INIT_DELAYED_WORK(&touch->tsi_work, da9034_tsi_work);
 	touch->notifier.notifier_call = da9034_touch_notifier;
 
-	input_dev = input_allocate_device();
+	input_dev = devm_input_allocate_device(&pdev->dev);
 	if (!input_dev) {
 		dev_err(&pdev->dev, "failed to allocate input device\n");
-		ret = -ENOMEM;
-		goto err_free_touch;
+		return -ENOMEM;
 	}
 
 	input_dev->name		= pdev->name;
@@ -346,26 +347,9 @@ static int da9034_touch_probe(struct platform_device *pdev)
 	touch->input_dev = input_dev;
 	input_set_drvdata(input_dev, touch);
 
-	ret = input_register_device(input_dev);
-	if (ret)
-		goto err_free_input;
-
-	platform_set_drvdata(pdev, touch);
-	return 0;
-
-err_free_input:
-	input_free_device(input_dev);
-err_free_touch:
-	kfree(touch);
-	return ret;
-}
-
-static int da9034_touch_remove(struct platform_device *pdev)
-{
-	struct da9034_touch *touch = platform_get_drvdata(pdev);
-
-	input_unregister_device(touch->input_dev);
-	kfree(touch);
+	error = input_register_device(input_dev);
+	if (error)
+		return error;
 
 	return 0;
 }
@@ -376,7 +360,6 @@ static struct platform_driver da9034_touch_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= da9034_touch_probe,
-	.remove		= da9034_touch_remove,
 };
 module_platform_driver(da9034_touch_driver);
 

drivers/input/touchscreen/edt-ft5x06.c

@@ -271,7 +271,7 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
 		wrbuf[0] = addr;
 		wrbuf[1] = value;
 
-		return edt_ft5x06_ts_readwrite(tsdata->client, 3,
+		return edt_ft5x06_ts_readwrite(tsdata->client, 2,
 					wrbuf, 0, NULL);
 
 	default:

drivers/input/touchscreen/egalax_ts.c

@@ -262,7 +262,7 @@ static int egalax_ts_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
 
-static struct of_device_id egalax_ts_dt_ids[] = {
+static const struct of_device_id egalax_ts_dt_ids[] = {
 	{ .compatible = "eeti,egalax_ts" },
 	{ /* sentinel */ }
 };

drivers/input/touchscreen/intel-mid-touch.c

@@ -36,6 +36,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <asm/intel_scu_ipc.h>
+#include <linux/device.h>
 
 /* PMIC Interrupt registers */
 #define PMIC_REG_ID1		0x00 /* PMIC ID1 register */
@@ -580,12 +581,17 @@ static int mrstouch_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!tsdev || !input) {
+	tsdev = devm_kzalloc(&pdev->dev, sizeof(struct mrstouch_dev),
+			     GFP_KERNEL);
+	if (!tsdev) {
 		dev_err(&pdev->dev, "unable to allocate memory\n");
-		err = -ENOMEM;
-		goto err_free_mem;
+		return -ENOMEM;
+	}
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
 	}
 
 	tsdev->dev = &pdev->dev;
@@ -598,7 +604,7 @@ static int mrstouch_probe(struct platform_device *pdev)
 	err = mrstouch_adc_init(tsdev);
 	if (err) {
 		dev_err(&pdev->dev, "ADC initialization failed\n");
-		goto err_free_mem;
+		return err;
 	}
 
 	input->name = "mrst_touchscreen";
@@ -618,38 +624,20 @@ static int mrstouch_probe(struct platform_device *pdev)
 	input_set_abs_params(tsdev->input, ABS_PRESSURE,
 			     MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
 
-	err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq,
-				   IRQF_ONESHOT, "mrstouch", tsdev);
+	err = devm_request_threaded_irq(&pdev->dev, tsdev->irq, NULL,
+					mrstouch_pendet_irq, IRQF_ONESHOT,
+					"mrstouch", tsdev);
 	if (err) {
 		dev_err(tsdev->dev, "unable to allocate irq\n");
-		goto err_free_mem;
+		return err;
 	}
 
 	err = input_register_device(tsdev->input);
 	if (err) {
 		dev_err(tsdev->dev, "unable to register input device\n");
-		goto err_free_irq;
+		return err;
 	}
 
-	platform_set_drvdata(pdev, tsdev);
-	return 0;
-
-err_free_irq:
-	free_irq(tsdev->irq, tsdev);
-err_free_mem:
-	input_free_device(input);
-	kfree(tsdev);
-	return err;
-}
-
-static int mrstouch_remove(struct platform_device *pdev)
-{
-	struct mrstouch_dev *tsdev = platform_get_drvdata(pdev);
-
-	free_irq(tsdev->irq, tsdev);
-	input_unregister_device(tsdev->input);
-	kfree(tsdev);
-
 	return 0;
 }
 
@@ -659,7 +647,6 @@ static struct platform_driver mrstouch_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= mrstouch_probe,
-	.remove		= mrstouch_remove,
 };
 module_platform_driver(mrstouch_driver);
 

drivers/input/touchscreen/lpc32xx_ts.c

@@ -384,7 +384,7 @@ static const struct dev_pm_ops lpc32xx_ts_pm_ops = {
 #endif
 
 #ifdef CONFIG_OF
-static struct of_device_id lpc32xx_tsc_of_match[] = {
+static const struct of_device_id lpc32xx_tsc_of_match[] = {
 	{ .compatible = "nxp,lpc3220-tsc", },
 	{ },
 };

drivers/input/touchscreen/mcs5000_ts.c

@@ -161,10 +161,9 @@ static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
+static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data,
+				 const struct mcs_platform_data *platform_data)
 {
-	const struct mcs_platform_data *platform_data =
-		data->platform_data;
 	struct i2c_client *client = data->client;
 
 	/* Touch reset & sleep mode */
@@ -187,28 +186,32 @@ static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
 }
 
 static int mcs5000_ts_probe(struct i2c_client *client,
-		const struct i2c_device_id *id)
+			    const struct i2c_device_id *id)
 {
+	const struct mcs_platform_data *pdata;
 	struct mcs5000_ts_data *data;
 	struct input_dev *input_dev;
-	int ret;
+	int error;
 
-	if (!dev_get_platdata(&client->dev))
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata)
 		return -EINVAL;
 
-	data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!data || !input_dev) {
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
-		ret = -ENOMEM;
-		goto err_free_mem;
+		return -ENOMEM;
 	}
 
 	data->client = client;
-	data->input_dev = input_dev;
-	data->platform_data = dev_get_platdata(&client->dev);
 
-	input_dev->name = "MELPAS MCS-5000 Touchscreen";
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "MELFAS MCS-5000 Touchscreen";
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 
@@ -219,43 +222,29 @@ static int mcs5000_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
 
 	input_set_drvdata(input_dev, data);
+	data->input_dev = input_dev;
 
-	if (data->platform_data->cfg_pin)
-		data->platform_data->cfg_pin();
-
-	ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt,
-			IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data);
+	if (pdata->cfg_pin)
+		pdata->cfg_pin();
 
-	if (ret < 0) {
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, mcs5000_ts_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "mcs5000_ts", data);
+	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
-		goto err_free_mem;
+		return error;
 	}
 
-	ret = input_register_device(data->input_dev);
-	if (ret < 0)
-		goto err_free_irq;
+	error = input_register_device(data->input_dev);
+	if (error) {
+		dev_err(&client->dev, "Failed to register input device\n");
+		return error;
+	}
 
-	mcs5000_ts_phys_init(data);
+	mcs5000_ts_phys_init(data, pdata);
 	i2c_set_clientdata(client, data);
 
-	return 0;
-
-err_free_irq:
-	free_irq(client->irq, data);
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(data);
-	return ret;
-}
-
-static int mcs5000_ts_remove(struct i2c_client *client)
-{
-	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
-
-	free_irq(client->irq, data);
-	input_unregister_device(data->input_dev);
-	kfree(data);
-
 	return 0;
 }
 
@@ -274,14 +263,15 @@ static int mcs5000_ts_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+	const struct mcs_platform_data *pdata = dev_get_platdata(dev);
 
-	mcs5000_ts_phys_init(data);
+	mcs5000_ts_phys_init(data, pdata);
 
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, mcs5000_ts_suspend, mcs5000_ts_resume);
-#endif
 
 static const struct i2c_device_id mcs5000_ts_id[] = {
 	{ "mcs5000_ts", 0 },
@@ -291,12 +281,9 @@ MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
 
 static struct i2c_driver mcs5000_ts_driver = {
 	.probe		= mcs5000_ts_probe,
-	.remove		= mcs5000_ts_remove,
 	.driver = {
 		.name = "mcs5000_ts",
-#ifdef CONFIG_PM
 		.pm   = &mcs5000_ts_pm,
-#endif
 	},
 	.id_table	= mcs5000_ts_id,
 };

drivers/input/touchscreen/mms114.c

@@ -456,7 +456,7 @@ static int mms114_probe(struct i2c_client *client,
 	data->input_dev = input_dev;
 	data->pdata = pdata;
 
-	input_dev->name = "MELPAS MMS114 Touchscreen";
+	input_dev->name = "MELFAS MMS114 Touchscreen";
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 	input_dev->open = mms114_input_open;
@@ -570,7 +570,7 @@ static const struct i2c_device_id mms114_id[] = {
 MODULE_DEVICE_TABLE(i2c, mms114_id);
 
 #ifdef CONFIG_OF
-static struct of_device_id mms114_dt_match[] = {
+static const struct of_device_id mms114_dt_match[] = {
 	{ .compatible = "melfas,mms114" },
 	{ }
 };

drivers/input/touchscreen/of_touchscreen.c

+/*
+ *  Generic DT helper functions for touchscreen devices
+ *
+ *  Copyright (c) 2014 Sebastian Reichel <sre@kernel.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/of.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+
+/**
+ * touchscreen_parse_of_params - parse common touchscreen DT properties
+ * @dev: device that should be parsed
+ *
+ * This function parses common DT properties for touchscreens and setups the
+ * input device accordingly. The function keeps previously setuped default
+ * values if no value is specified via DT.
+ */
+void touchscreen_parse_of_params(struct input_dev *dev)
+{
+	struct device_node *np = dev->dev.parent->of_node;
+	struct input_absinfo *absinfo;
+
+	input_alloc_absinfo(dev);
+	if (!dev->absinfo)
+		return;
+
+	absinfo = &dev->absinfo[ABS_X];
+	of_property_read_u32(np, "touchscreen-size-x", &absinfo->maximum);
+	of_property_read_u32(np, "touchscreen-fuzz-x", &absinfo->fuzz);
+
+	absinfo = &dev->absinfo[ABS_Y];
+	of_property_read_u32(np, "touchscreen-size-y", &absinfo->maximum);
+	of_property_read_u32(np, "touchscreen-fuzz-y", &absinfo->fuzz);
+
+	absinfo = &dev->absinfo[ABS_PRESSURE];
+	of_property_read_u32(np, "touchscreen-max-pressure", &absinfo->maximum);
+	of_property_read_u32(np, "touchscreen-fuzz-pressure", &absinfo->fuzz);
+}
+EXPORT_SYMBOL(touchscreen_parse_of_params);

drivers/input/touchscreen/pixcir_i2c_ts.c

@@ -24,12 +24,13 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/pixcir_ts.h>
+#include <linux/gpio.h>
 
 struct pixcir_i2c_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input;
 	const struct pixcir_ts_platform_data *chip;
-	bool exiting;
+	bool running;
 };
 
 static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
@@ -87,11 +88,12 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
 static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
 {
 	struct pixcir_i2c_ts_data *tsdata = dev_id;
+	const struct pixcir_ts_platform_data *pdata = tsdata->chip;
 
-	while (!tsdata->exiting) {
+	while (tsdata->running) {
 		pixcir_ts_poscheck(tsdata);
 
-		if (tsdata->chip->attb_read_val())
+		if (gpio_get_value(pdata->gpio_attb))
 			break;
 
 		msleep(20);
@@ -100,25 +102,221 @@ static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
+				 enum pixcir_power_mode mode)
+{
+	struct device *dev = &ts->client->dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_POWER_MODE, ret);
+		return ret;
+	}
+
+	ret &= ~PIXCIR_POWER_MODE_MASK;
+	ret |= mode;
+
+	/* Always AUTO_IDLE */
+	ret |= PIXCIR_POWER_ALLOW_IDLE;
+
+	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_POWER_MODE, ret);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_POWER_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Set the interrupt mode for the device i.e. ATTB line behaviour
+ *
+ * @polarity : 1 for active high, 0 for active low.
+ */
+static int pixcir_set_int_mode(struct pixcir_i2c_ts_data *ts,
+			       enum pixcir_int_mode mode, bool polarity)
+{
+	struct device *dev = &ts->client->dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	ret &= ~PIXCIR_INT_MODE_MASK;
+	ret |= mode;
+
+	if (polarity)
+		ret |= PIXCIR_INT_POL_HIGH;
+	else
+		ret &= ~PIXCIR_INT_POL_HIGH;
+
+	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Enable/disable interrupt generation
+ */
+static int pixcir_int_enable(struct pixcir_i2c_ts_data *ts, bool enable)
+{
+	struct device *dev = &ts->client->dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	if (enable)
+		ret |= PIXCIR_INT_ENABLE;
+	else
+		ret &= ~PIXCIR_INT_ENABLE;
+
+	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pixcir_start(struct pixcir_i2c_ts_data *ts)
+{
+	struct device *dev = &ts->client->dev;
+	int error;
+
+	/* LEVEL_TOUCH interrupt with active low polarity */
+	error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0);
+	if (error) {
+		dev_err(dev, "Failed to set interrupt mode: %d\n", error);
+		return error;
+	}
+
+	ts->running = true;
+	mb();	/* Update status before IRQ can fire */
+
+	/* enable interrupt generation */
+	error = pixcir_int_enable(ts, true);
+	if (error) {
+		dev_err(dev, "Failed to enable interrupt generation: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int pixcir_stop(struct pixcir_i2c_ts_data *ts)
+{
+	int error;
+
+	/* Disable interrupt generation */
+	error = pixcir_int_enable(ts, false);
+	if (error) {
+		dev_err(&ts->client->dev,
+			"Failed to disable interrupt generation: %d\n",
+			error);
+		return error;
+	}
+
+	/* Exit ISR if running, no more report parsing */
+	ts->running = false;
+	mb();	/* update status before we synchronize irq */
+
+	/* Wait till running ISR is complete */
+	synchronize_irq(ts->client->irq);
+
+	return 0;
+}
+
+static int pixcir_input_open(struct input_dev *dev)
+{
+	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
+
+	return pixcir_start(ts);
+}
+
+static void pixcir_input_close(struct input_dev *dev)
+{
+	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
+
+	pixcir_stop(ts);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int pixcir_i2c_ts_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(&client->dev)) {
+		if (!input->users) {
+			ret = pixcir_start(ts);
+			if (ret) {
+				dev_err(dev, "Failed to start\n");
+				goto unlock;
+			}
+		}
 
-	if (device_may_wakeup(&client->dev))
 		enable_irq_wake(client->irq);
+	} else if (input->users) {
+		ret = pixcir_stop(ts);
+	}
 
-	return 0;
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
 }
 
 static int pixcir_i2c_ts_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
 
-	if (device_may_wakeup(&client->dev))
+	if (device_may_wakeup(&client->dev)) {
 		disable_irq_wake(client->irq);
 
-	return 0;
+		if (!input->users) {
+			ret = pixcir_stop(ts);
+			if (ret) {
+				dev_err(dev, "Failed to stop\n");
+				goto unlock;
+			}
+		}
+	} else if (input->users) {
+		ret = pixcir_start(ts);
+	}
+
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
 }
 #endif
 
@@ -130,6 +328,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 {
 	const struct pixcir_ts_platform_data *pdata =
 			dev_get_platdata(&client->dev);
+	struct device *dev = &client->dev;
 	struct pixcir_i2c_ts_data *tsdata;
 	struct input_dev *input;
 	int error;
@@ -139,12 +338,19 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!tsdata || !input) {
-		dev_err(&client->dev, "Failed to allocate driver data!\n");
-		error = -ENOMEM;
-		goto err_free_mem;
+	if (!gpio_is_valid(pdata->gpio_attb)) {
+		dev_err(dev, "Invalid gpio_attb in pdata\n");
+		return -EINVAL;
+	}
+
+	tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL);
+	if (!tsdata)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "Failed to allocate input device\n");
+		return -ENOMEM;
 	}
 
 	tsdata->client = client;
@@ -153,6 +359,8 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 
 	input->name = client->name;
 	input->id.bustype = BUS_I2C;
+	input->open = pixcir_input_open;
+	input->close = pixcir_input_close;
 	input->dev.parent = &client->dev;
 
 	__set_bit(EV_KEY, input->evbit);
@@ -165,44 +373,47 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 
 	input_set_drvdata(input, tsdata);
 
-	error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr,
-				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				     client->name, tsdata);
+	error = devm_gpio_request_one(dev, pdata->gpio_attb,
+				      GPIOF_DIR_IN, "pixcir_i2c_attb");
 	if (error) {
-		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
-		goto err_free_mem;
+		dev_err(dev, "Failed to request ATTB gpio\n");
+		return error;
 	}
 
+	error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
+					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					  client->name, tsdata);
+	if (error) {
+		dev_err(dev, "failed to request irq %d\n", client->irq);
+		return error;
+	}
+
+	/* Always be in IDLE mode to save power, device supports auto wake */
+	error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE);
+	if (error) {
+		dev_err(dev, "Failed to set IDLE mode\n");
+		return error;
+	}
+
+	/* Stop device till opened */
+	error = pixcir_stop(tsdata);
+	if (error)
+		return error;
+
 	error = input_register_device(input);
 	if (error)
-		goto err_free_irq;
+		return error;
 
 	i2c_set_clientdata(client, tsdata);
 	device_init_wakeup(&client->dev, 1);
 
 	return 0;
-
-err_free_irq:
-	free_irq(client->irq, tsdata);
-err_free_mem:
-	input_free_device(input);
-	kfree(tsdata);
-	return error;
 }
 
 static int pixcir_i2c_ts_remove(struct i2c_client *client)
 {
-	struct pixcir_i2c_ts_data *tsdata = i2c_get_clientdata(client);
-
 	device_init_wakeup(&client->dev, 0);
 
-	tsdata->exiting = true;
-	mb();
-	free_irq(client->irq, tsdata);
-
-	input_unregister_device(tsdata->input);
-	kfree(tsdata);
-
 	return 0;
 }
 

drivers/input/touchscreen/sun4i-ts.c

+/*
+ * Allwinner sunxi resistive touchscreen controller driver
+ *
+ * Copyright (C) 2013 - 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The hwmon parts are based on work by Corentin LABBE which is:
+ * Copyright (C) 2013 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * The sun4i-ts controller is capable of detecting a second touch, but when a
+ * second touch is present then the accuracy becomes so bad the reported touch
+ * location is not useable.
+ *
+ * The original android driver contains some complicated heuristics using the
+ * aprox. distance between the 2 touches to see if the user is making a pinch
+ * open / close movement, and then reports emulated multi-touch events around
+ * the last touch coordinate (as the dual-touch coordinates are worthless).
+ *
+ * These kinds of heuristics are just asking for trouble (and don't belong
+ * in the kernel). So this driver offers straight forward, reliable single
+ * touch functionality only.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define TP_CTRL0		0x00
+#define TP_CTRL1		0x04
+#define TP_CTRL2		0x08
+#define TP_CTRL3		0x0c
+#define TP_INT_FIFOC		0x10
+#define TP_INT_FIFOS		0x14
+#define TP_TPR			0x18
+#define TP_CDAT			0x1c
+#define TEMP_DATA		0x20
+#define TP_DATA			0x24
+
+/* TP_CTRL0 bits */
+#define ADC_FIRST_DLY(x)	((x) << 24) /* 8 bits */
+#define ADC_FIRST_DLY_MODE(x)	((x) << 23)
+#define ADC_CLK_SEL(x)		((x) << 22)
+#define ADC_CLK_DIV(x)		((x) << 20) /* 3 bits */
+#define FS_DIV(x)		((x) << 16) /* 4 bits */
+#define T_ACQ(x)		((x) << 0) /* 16 bits */
+
+/* TP_CTRL1 bits */
+#define STYLUS_UP_DEBOUN(x)	((x) << 12) /* 8 bits */
+#define STYLUS_UP_DEBOUN_EN(x)	((x) << 9)
+#define TOUCH_PAN_CALI_EN(x)	((x) << 6)
+#define TP_DUAL_EN(x)		((x) << 5)
+#define TP_MODE_EN(x)		((x) << 4)
+#define TP_ADC_SELECT(x)	((x) << 3)
+#define ADC_CHAN_SELECT(x)	((x) << 0)  /* 3 bits */
+
+/* TP_CTRL2 bits */
+#define TP_SENSITIVE_ADJUST(x)	((x) << 28) /* 4 bits */
+#define TP_MODE_SELECT(x)	((x) << 26) /* 2 bits */
+#define PRE_MEA_EN(x)		((x) << 24)
+#define PRE_MEA_THRE_CNT(x)	((x) << 0) /* 24 bits */
+
+/* TP_CTRL3 bits */
+#define FILTER_EN(x)		((x) << 2)
+#define FILTER_TYPE(x)		((x) << 0)  /* 2 bits */
+
+/* TP_INT_FIFOC irq and fifo mask / control bits */
+#define TEMP_IRQ_EN(x)		((x) << 18)
+#define OVERRUN_IRQ_EN(x)	((x) << 17)
+#define DATA_IRQ_EN(x)		((x) << 16)
+#define TP_DATA_XY_CHANGE(x)	((x) << 13)
+#define FIFO_TRIG(x)		((x) << 8)  /* 5 bits */
+#define DATA_DRQ_EN(x)		((x) << 7)
+#define FIFO_FLUSH(x)		((x) << 4)
+#define TP_UP_IRQ_EN(x)		((x) << 1)
+#define TP_DOWN_IRQ_EN(x)	((x) << 0)
+
+/* TP_INT_FIFOS irq and fifo status bits */
+#define TEMP_DATA_PENDING	BIT(18)
+#define FIFO_OVERRUN_PENDING	BIT(17)
+#define FIFO_DATA_PENDING	BIT(16)
+#define TP_IDLE_FLG		BIT(2)
+#define TP_UP_PENDING		BIT(1)
+#define TP_DOWN_PENDING		BIT(0)
+
+/* TP_TPR bits */
+#define TEMP_ENABLE(x)		((x) << 16)
+#define TEMP_PERIOD(x)		((x) << 0)  /* t = x * 256 * 16 / clkin */
+
+struct sun4i_ts_data {
+	struct device *dev;
+	struct input_dev *input;
+	void __iomem *base;
+	unsigned int irq;
+	bool ignore_fifo_data;
+	int temp_data;
+};
+
+static void sun4i_ts_irq_handle_input(struct sun4i_ts_data *ts, u32 reg_val)
+{
+	u32 x, y;
+
+	if (reg_val & FIFO_DATA_PENDING) {
+		x = readl(ts->base + TP_DATA);
+		y = readl(ts->base + TP_DATA);
+		/* The 1st location reported after an up event is unreliable */
+		if (!ts->ignore_fifo_data) {
+			input_report_abs(ts->input, ABS_X, x);
+			input_report_abs(ts->input, ABS_Y, y);
+			/*
+			 * The hardware has a separate down status bit, but
+			 * that gets set before we get the first location,
+			 * resulting in reporting a click on the old location.
+			 */
+			input_report_key(ts->input, BTN_TOUCH, 1);
+			input_sync(ts->input);
+		} else {
+			ts->ignore_fifo_data = false;
+		}
+	}
+
+	if (reg_val & TP_UP_PENDING) {
+		ts->ignore_fifo_data = true;
+		input_report_key(ts->input, BTN_TOUCH, 0);
+		input_sync(ts->input);
+	}
+}
+
+static irqreturn_t sun4i_ts_irq(int irq, void *dev_id)
+{
+	struct sun4i_ts_data *ts = dev_id;
+	u32 reg_val;
+
+	reg_val  = readl(ts->base + TP_INT_FIFOS);
+
+	if (reg_val & TEMP_DATA_PENDING)
+		ts->temp_data = readl(ts->base + TEMP_DATA);
+
+	if (ts->input)
+		sun4i_ts_irq_handle_input(ts, reg_val);
+
+	writel(reg_val, ts->base + TP_INT_FIFOS);
+
+	return IRQ_HANDLED;
+}
+
+static int sun4i_ts_open(struct input_dev *dev)
+{
+	struct sun4i_ts_data *ts = input_get_drvdata(dev);
+
+	/* Flush, set trig level to 1, enable temp, data and up irqs */
+	writel(TEMP_IRQ_EN(1) | DATA_IRQ_EN(1) | FIFO_TRIG(1) | FIFO_FLUSH(1) |
+		TP_UP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
+
+	return 0;
+}
+
+static void sun4i_ts_close(struct input_dev *dev)
+{
+	struct sun4i_ts_data *ts = input_get_drvdata(dev);
+
+	/* Deactivate all input IRQs */
+	writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sun4i_ts_data *ts = dev_get_drvdata(dev);
+
+	/* No temp_data until the first irq */
+	if (ts->temp_data == -1)
+		return -EAGAIN;
+
+	return sprintf(buf, "%d\n", (ts->temp_data - 1447) * 100);
+}
+
+static ssize_t show_temp_label(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	return sprintf(buf, "SoC temperature\n");
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL);
+
+static struct attribute *sun4i_ts_attrs[] = {
+	&dev_attr_temp1_input.attr,
+	&dev_attr_temp1_label.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(sun4i_ts);
+
+static int sun4i_ts_probe(struct platform_device *pdev)
+{
+	struct sun4i_ts_data *ts;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device *hwmon;
+	int error;
+	bool ts_attached;
+
+	ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->dev = dev;
+	ts->ignore_fifo_data = true;
+	ts->temp_data = -1;
+
+	ts_attached = of_property_read_bool(np, "allwinner,ts-attached");
+	if (ts_attached) {
+		ts->input = devm_input_allocate_device(dev);
+		if (!ts->input)
+			return -ENOMEM;
+
+		ts->input->name = pdev->name;
+		ts->input->phys = "sun4i_ts/input0";
+		ts->input->open = sun4i_ts_open;
+		ts->input->close = sun4i_ts_close;
+		ts->input->id.bustype = BUS_HOST;
+		ts->input->id.vendor = 0x0001;
+		ts->input->id.product = 0x0001;
+		ts->input->id.version = 0x0100;
+		ts->input->evbit[0] =  BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
+		__set_bit(BTN_TOUCH, ts->input->keybit);
+		input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
+		input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
+		input_set_drvdata(ts->input, ts);
+	}
+
+	ts->base = devm_ioremap_resource(dev,
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(ts->base))
+		return PTR_ERR(ts->base);
+
+	ts->irq = platform_get_irq(pdev, 0);
+	error = devm_request_irq(dev, ts->irq, sun4i_ts_irq, 0, "sun4i-ts", ts);
+	if (error)
+		return error;
+
+	/*
+	 * Select HOSC clk, clkin = clk / 6, adc samplefreq = clkin / 8192,
+	 * t_acq = clkin / (16 * 64)
+	 */
+	writel(ADC_CLK_SEL(0) | ADC_CLK_DIV(2) | FS_DIV(7) | T_ACQ(63),
+	       ts->base + TP_CTRL0);
+
+	/*
+	 * sensitive_adjust = 15 : max, which is not all that sensitive,
+	 * tp_mode = 0 : only x and y coordinates, as we don't use dual touch
+	 */
+	writel(TP_SENSITIVE_ADJUST(15) | TP_MODE_SELECT(0),
+	       ts->base + TP_CTRL2);
+
+	/* Enable median filter, type 1 : 5/3 */
+	writel(FILTER_EN(1) | FILTER_TYPE(1), ts->base + TP_CTRL3);
+
+	/* Enable temperature measurement, period 1953 (2 seconds) */
+	writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR);
+
+	/*
+	 * Set stylus up debounce to aprox 10 ms, enable debounce, and
+	 * finally enable tp mode.
+	 */
+	writel(STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1) | TP_MODE_EN(1),
+	       ts->base + TP_CTRL1);
+
+	hwmon = devm_hwmon_device_register_with_groups(ts->dev, "sun4i_ts",
+						       ts, sun4i_ts_groups);
+	if (IS_ERR(hwmon))
+		return PTR_ERR(hwmon);
+
+	writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
+
+	if (ts_attached) {
+		error = input_register_device(ts->input);
+		if (error) {
+			writel(0, ts->base + TP_INT_FIFOC);
+			return error;
+		}
+	}
+
+	platform_set_drvdata(pdev, ts);
+	return 0;
+}
+
+static int sun4i_ts_remove(struct platform_device *pdev)
+{
+	struct sun4i_ts_data *ts = platform_get_drvdata(pdev);
+
+	/* Explicit unregister to avoid open/close changing the imask later */
+	if (ts->input)
+		input_unregister_device(ts->input);
+
+	/* Deactivate all IRQs */
+	writel(0, ts->base + TP_INT_FIFOC);
+
+	return 0;
+}
+
+static const struct of_device_id sun4i_ts_of_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-ts", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sun4i_ts_of_match);
+
+static struct platform_driver sun4i_ts_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "sun4i-ts",
+		.of_match_table = of_match_ptr(sun4i_ts_of_match),
+	},
+	.probe	= sun4i_ts_probe,
+	.remove	= sun4i_ts_remove,
+};
+
+module_platform_driver(sun4i_ts_driver);
+
+MODULE_DESCRIPTION("Allwinner sun4i resistive touchscreen controller driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");

drivers/input/touchscreen/tsc2005.c

@@ -25,11 +25,15 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/input.h>
+#include <linux/input/touchscreen.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/tsc2005.h>
+#include <linux/regulator/consumer.h>
 
 /*
  * The touchscreen interface operates as follows:
@@ -100,6 +104,11 @@
 					 TSC2005_CFR2_AVG_7)
 
 #define MAX_12BIT			0xfff
+#define TSC2005_DEF_X_FUZZ		4
+#define TSC2005_DEF_Y_FUZZ		8
+#define TSC2005_DEF_P_FUZZ		2
+#define TSC2005_DEF_RESISTOR		280
+
 #define TSC2005_SPI_MAX_SPEED_HZ	10000000
 #define TSC2005_PENUP_TIME_MS		40
 
@@ -143,6 +152,9 @@ struct tsc2005 {
 
 	bool			pen_down;
 
+	struct regulator	*vio;
+
+	int			reset_gpio;
 	void			(*set_reset)(bool enable);
 };
 
@@ -337,6 +349,14 @@ static void tsc2005_stop_scan(struct tsc2005 *ts)
 	tsc2005_cmd(ts, TSC2005_CMD_STOP);
 }
 
+static void tsc2005_set_reset(struct tsc2005 *ts, bool enable)
+{
+	if (ts->reset_gpio >= 0)
+		gpio_set_value(ts->reset_gpio, enable);
+	else if (ts->set_reset)
+		ts->set_reset(enable);
+}
+
 /* must be called with ts->mutex held */
 static void __tsc2005_disable(struct tsc2005 *ts)
 {
@@ -355,7 +375,7 @@ static void __tsc2005_enable(struct tsc2005 *ts)
 {
 	tsc2005_start_scan(ts);
 
-	if (ts->esd_timeout && ts->set_reset) {
+	if (ts->esd_timeout && (ts->set_reset || ts->reset_gpio)) {
 		ts->last_valid_interrupt = jiffies;
 		schedule_delayed_work(&ts->esd_work,
 				round_jiffies_relative(
@@ -414,9 +434,9 @@ static ssize_t tsc2005_selftest_show(struct device *dev,
 	}
 
 	/* hardware reset */
-	ts->set_reset(false);
+	tsc2005_set_reset(ts, false);
 	usleep_range(100, 500); /* only 10us required */
-	ts->set_reset(true);
+	tsc2005_set_reset(ts, true);
 
 	if (!success)
 		goto out;
@@ -459,7 +479,7 @@ static umode_t tsc2005_attr_is_visible(struct kobject *kobj,
 	umode_t mode = attr->mode;
 
 	if (attr == &dev_attr_selftest.attr) {
-		if (!ts->set_reset)
+		if (!ts->set_reset && !ts->reset_gpio)
 			mode = 0;
 	}
 
@@ -509,9 +529,9 @@ static void tsc2005_esd_work(struct work_struct *work)
 
 	tsc2005_update_pen_state(ts, 0, 0, 0);
 
-	ts->set_reset(false);
+	tsc2005_set_reset(ts, false);
 	usleep_range(100, 500); /* only 10us required */
-	ts->set_reset(true);
+	tsc2005_set_reset(ts, true);
 
 	enable_irq(ts->spi->irq);
 	tsc2005_start_scan(ts);
@@ -572,29 +592,47 @@ static void tsc2005_setup_spi_xfer(struct tsc2005 *ts)
 static int tsc2005_probe(struct spi_device *spi)
 {
 	const struct tsc2005_platform_data *pdata = dev_get_platdata(&spi->dev);
+	struct device_node *np = spi->dev.of_node;
+
 	struct tsc2005 *ts;
 	struct input_dev *input_dev;
-	unsigned int max_x, max_y, max_p;
-	unsigned int fudge_x, fudge_y, fudge_p;
+	unsigned int max_x = MAX_12BIT;
+	unsigned int max_y = MAX_12BIT;
+	unsigned int max_p = MAX_12BIT;
+	unsigned int fudge_x = TSC2005_DEF_X_FUZZ;
+	unsigned int fudge_y = TSC2005_DEF_Y_FUZZ;
+	unsigned int fudge_p = TSC2005_DEF_P_FUZZ;
+	unsigned int x_plate_ohm = TSC2005_DEF_RESISTOR;
+	unsigned int esd_timeout;
 	int error;
 
-	if (!pdata) {
-		dev_dbg(&spi->dev, "no platform data\n");
+	if (!np && !pdata) {
+		dev_err(&spi->dev, "no platform data\n");
 		return -ENODEV;
 	}
 
-	fudge_x	= pdata->ts_x_fudge	   ? : 4;
-	fudge_y	= pdata->ts_y_fudge	   ? : 8;
-	fudge_p	= pdata->ts_pressure_fudge ? : 2;
-	max_x	= pdata->ts_x_max	   ? : MAX_12BIT;
-	max_y	= pdata->ts_y_max	   ? : MAX_12BIT;
-	max_p	= pdata->ts_pressure_max   ? : MAX_12BIT;
-
 	if (spi->irq <= 0) {
-		dev_dbg(&spi->dev, "no irq\n");
+		dev_err(&spi->dev, "no irq\n");
 		return -ENODEV;
 	}
 
+	if (pdata) {
+		fudge_x	= pdata->ts_x_fudge;
+		fudge_y	= pdata->ts_y_fudge;
+		fudge_p	= pdata->ts_pressure_fudge;
+		max_x	= pdata->ts_x_max;
+		max_y	= pdata->ts_y_max;
+		max_p	= pdata->ts_pressure_max;
+		x_plate_ohm = pdata->ts_x_plate_ohm;
+		esd_timeout = pdata->esd_timeout_ms;
+	} else {
+		x_plate_ohm = TSC2005_DEF_RESISTOR;
+		of_property_read_u32(np, "ti,x-plate-ohms", &x_plate_ohm);
+		esd_timeout = 0;
+		of_property_read_u32(np, "ti,esd-recovery-timeout-ms",
+								&esd_timeout);
+	}
+
 	spi->mode = SPI_MODE_0;
 	spi->bits_per_word = 8;
 	if (!spi->max_speed_hz)
@@ -604,19 +642,48 @@ static int tsc2005_probe(struct spi_device *spi)
 	if (error)
 		return error;
 
-	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ts || !input_dev) {
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
+	ts = devm_kzalloc(&spi->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&spi->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	ts->spi = spi;
 	ts->idev = input_dev;
 
-	ts->x_plate_ohm	= pdata->ts_x_plate_ohm	? : 280;
-	ts->esd_timeout	= pdata->esd_timeout_ms;
-	ts->set_reset	= pdata->set_reset;
+	ts->x_plate_ohm = x_plate_ohm;
+	ts->esd_timeout = esd_timeout;
+
+	if (np) {
+		ts->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
+		if (ts->reset_gpio == -EPROBE_DEFER)
+			return ts->reset_gpio;
+		if (ts->reset_gpio < 0) {
+			dev_err(&spi->dev, "error acquiring reset gpio: %d\n",
+				ts->reset_gpio);
+			return ts->reset_gpio;
+		}
+
+		error = devm_gpio_request_one(&spi->dev, ts->reset_gpio, 0,
+					      "reset-gpios");
+		if (error) {
+			dev_err(&spi->dev, "error requesting reset gpio: %d\n",
+				error);
+			return error;
+		}
+
+		ts->vio = devm_regulator_get(&spi->dev, "vio");
+		if (IS_ERR(ts->vio)) {
+			error = PTR_ERR(ts->vio);
+			dev_err(&spi->dev, "vio regulator missing (%d)", error);
+			return error;
+		}
+	} else {
+		ts->reset_gpio = -1;
+		ts->set_reset = pdata->set_reset;
+	}
 
 	mutex_init(&ts->mutex);
 
@@ -641,6 +708,9 @@ static int tsc2005_probe(struct spi_device *spi)
 	input_set_abs_params(input_dev, ABS_Y, 0, max_y, fudge_y, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
 
+	if (np)
+		touchscreen_parse_of_params(input_dev);
+
 	input_dev->open = tsc2005_open;
 	input_dev->close = tsc2005_close;
 
@@ -649,12 +719,20 @@ static int tsc2005_probe(struct spi_device *spi)
 	/* Ensure the touchscreen is off */
 	tsc2005_stop_scan(ts);
 
-	error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread,
-				     IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-				     "tsc2005", ts);
+	error = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
+					  tsc2005_irq_thread,
+					  IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					  "tsc2005", ts);
 	if (error) {
 		dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
-		goto err_free_mem;
+		return error;
+	}
+
+	/* enable regulator for DT */
+	if (ts->vio) {
+		error = regulator_enable(ts->vio);
+		if (error)
+			return error;
 	}
 
 	spi_set_drvdata(spi, ts);
@@ -662,7 +740,7 @@ static int tsc2005_probe(struct spi_device *spi)
 	if (error) {
 		dev_err(&spi->dev,
 			"Failed to create sysfs attributes, err: %d\n", error);
-		goto err_clear_drvdata;
+		goto disable_regulator;
 	}
 
 	error = input_register_device(ts->idev);
@@ -677,11 +755,9 @@ static int tsc2005_probe(struct spi_device *spi)
 
 err_remove_sysfs:
 	sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group);
-err_clear_drvdata:
-	free_irq(spi->irq, ts);
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(ts);
+disable_regulator:
+	if (ts->vio)
+		regulator_disable(ts->vio);
 	return error;
 }
 
@@ -689,11 +765,10 @@ static int tsc2005_remove(struct spi_device *spi)
 {
 	struct tsc2005 *ts = spi_get_drvdata(spi);
 
-	sysfs_remove_group(&ts->spi->dev.kobj, &tsc2005_attr_group);
+	sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group);
 
-	free_irq(ts->spi->irq, ts);
-	input_unregister_device(ts->idev);
-	kfree(ts);
+	if (ts->vio)
+		regulator_disable(ts->vio);
 
 	return 0;
 }

drivers/input/touchscreen/zforce_ts.c

@@ -880,7 +880,7 @@ static struct i2c_device_id zforce_idtable[] = {
 MODULE_DEVICE_TABLE(i2c, zforce_idtable);
 
 #ifdef CONFIG_OF
-static struct of_device_id zforce_dt_idtable[] = {
+static const struct of_device_id zforce_dt_idtable[] = {
 	{ .compatible = "neonode,zforce" },
 	{},
 };

drivers/platform/chrome/chromeos_laptop.c

@@ -84,21 +84,19 @@ static struct i2c_board_info tsl2563_als_device = {
 	I2C_BOARD_INFO("tsl2563", TAOS_ALS_I2C_ADDR),
 };
 
+static int mxt_t19_keys[] = {
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	BTN_LEFT
+};
+
 static struct mxt_platform_data atmel_224s_tp_platform_data = {
-	.x_line			= 18,
-	.y_line			= 12,
-	.x_size			= 102*20,
-	.y_size			= 68*20,
-	.blen			= 0x80,	/* Gain setting is in upper 4 bits */
-	.threshold		= 0x32,
-	.voltage		= 0,	/* 3.3V */
-	.orient			= MXT_VERTICAL_FLIP,
 	.irqflags		= IRQF_TRIGGER_FALLING,
-	.is_tp			= true,
-	.key_map		= { KEY_RESERVED,
-				    KEY_RESERVED,
-				    KEY_RESERVED,
-				    BTN_LEFT },
+	.t19_num_keys		= ARRAY_SIZE(mxt_t19_keys),
+	.t19_keymap		= mxt_t19_keys,
 	.config			= NULL,
 	.config_length		= 0,
 };
@@ -110,16 +108,7 @@ static struct i2c_board_info atmel_224s_tp_device = {
 };
 
 static struct mxt_platform_data atmel_1664s_platform_data = {
-	.x_line			= 32,
-	.y_line			= 50,
-	.x_size			= 1700,
-	.y_size			= 2560,
-	.blen			= 0x89,	/* Gain setting is in upper 4 bits */
-	.threshold		= 0x28,
-	.voltage		= 0,	/* 3.3V */
-	.orient			= MXT_ROTATED_90_COUNTER,
 	.irqflags		= IRQF_TRIGGER_FALLING,
-	.is_tp			= false,
 	.config			= NULL,
 	.config_length		= 0,
 };

include/linux/gpio_keys.h

@@ -3,29 +3,53 @@
 
 struct device;
 
+/**
+ * struct gpio_keys_button - configuration parameters
+ * @code:		input event code (KEY_*, SW_*)
+ * @gpio:		%-1 if this key does not support gpio
+ * @active_low:		%true indicates that button is considered
+ *			depressed when gpio is low
+ * @desc:		label that will be attached to button's gpio
+ * @type:		input event type (%EV_KEY, %EV_SW, %EV_ABS)
+ * @wakeup:		configure the button as a wake-up source
+ * @debounce_interval:	debounce ticks interval in msecs
+ * @can_disable:	%true indicates that userspace is allowed to
+ *			disable button via sysfs
+ * @value:		axis value for %EV_ABS
+ * @irq:		Irq number in case of interrupt keys
+ */
 struct gpio_keys_button {
-	/* Configuration parameters */
-	unsigned int code;	/* input event code (KEY_*, SW_*) */
-	int gpio;		/* -1 if this key does not support gpio */
+	unsigned int code;
+	int gpio;
 	int active_low;
 	const char *desc;
-	unsigned int type;	/* input event type (EV_KEY, EV_SW, EV_ABS) */
-	int wakeup;		/* configure the button as a wake-up source */
-	int debounce_interval;	/* debounce ticks interval in msecs */
+	unsigned int type;
+	int wakeup;
+	int debounce_interval;
 	bool can_disable;
-	int value;		/* axis value for EV_ABS */
-	unsigned int irq;	/* Irq number in case of interrupt keys */
+	int value;
+	unsigned int irq;
 };
 
+/**
+ * struct gpio_keys_platform_data - platform data for gpio_keys driver
+ * @buttons:		pointer to array of &gpio_keys_button structures
+ *			describing buttons attached to the device
+ * @nbuttons:		number of elements in @buttons array
+ * @poll_interval:	polling interval in msecs - for polling driver only
+ * @rep:		enable input subsystem auto repeat
+ * @enable:		platform hook for enabling the device
+ * @disable:		platform hook for disabling the device
+ * @name:		input device name
+ */
 struct gpio_keys_platform_data {
 	struct gpio_keys_button *buttons;
 	int nbuttons;
-	unsigned int poll_interval;	/* polling interval in msecs -
-					   for polling driver only */
-	unsigned int rep:1;		/* enable input subsystem auto repeat */
+	unsigned int poll_interval;
+	unsigned int rep:1;
 	int (*enable)(struct device *dev);
 	void (*disable)(struct device *dev);
-	const char *name;		/* input device name */
+	const char *name;
 };
 
 #endif

include/linux/i2c/atmel_mxt_ts.h

@@ -15,35 +15,14 @@
 
 #include <linux/types.h>
 
-/* For key_map array */
-#define MXT_NUM_GPIO		4
-
-/* Orient */
-#define MXT_NORMAL		0x0
-#define MXT_DIAGONAL		0x1
-#define MXT_HORIZONTAL_FLIP	0x2
-#define MXT_ROTATED_90_COUNTER	0x3
-#define MXT_VERTICAL_FLIP	0x4
-#define MXT_ROTATED_90		0x5
-#define MXT_ROTATED_180		0x6
-#define MXT_DIAGONAL_COUNTER	0x7
-
 /* The platform data for the Atmel maXTouch touchscreen driver */
 struct mxt_platform_data {
 	const u8 *config;
 	size_t config_length;
-
-	unsigned int x_line;
-	unsigned int y_line;
-	unsigned int x_size;
-	unsigned int y_size;
-	unsigned int blen;
-	unsigned int threshold;
-	unsigned int voltage;
-	unsigned char orient;
+	u32 config_crc;
 	unsigned long irqflags;
-	bool is_tp;
-	const unsigned int key_map[MXT_NUM_GPIO];
+	u8 t19_num_keys;
+	const unsigned int *t19_keymap;
 };
 
 #endif /* __LINUX_ATMEL_MXT_TS_H */

include/linux/input-polldev.h

@@ -48,9 +48,12 @@ struct input_polled_dev {
 
 /* private: */
 	struct delayed_work work;
+
+	bool devres_managed;
 };
 
 struct input_polled_dev *input_allocate_polled_device(void);
+struct input_polled_dev *devm_input_allocate_polled_device(struct device *dev);
 void input_free_polled_device(struct input_polled_dev *dev);
 int input_register_polled_device(struct input_polled_dev *dev);
 void input_unregister_polled_device(struct input_polled_dev *dev);

include/linux/input/pixcir_ts.h

 #ifndef	_PIXCIR_I2C_TS_H
 #define	_PIXCIR_I2C_TS_H
 
+/*
+ * Register map
+ */
+#define PIXCIR_REG_POWER_MODE	51
+#define PIXCIR_REG_INT_MODE	52
+
+/*
+ * Power modes:
+ * active: max scan speed
+ * idle: lower scan speed with automatic transition to active on touch
+ * halt: datasheet says sleep but this is more like halt as the chip
+ *       clocks are cut and it can only be brought out of this mode
+ *	 using the RESET pin.
+ */
+enum pixcir_power_mode {
+	PIXCIR_POWER_ACTIVE,
+	PIXCIR_POWER_IDLE,
+	PIXCIR_POWER_HALT,
+};
+
+#define PIXCIR_POWER_MODE_MASK	0x03
+#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2)
+
+/*
+ * Interrupt modes:
+ * periodical: interrupt is asserted periodicaly
+ * diff coordinates: interrupt is asserted when coordinates change
+ * level on touch: interrupt level asserted during touch
+ * pulse on touch: interrupt pulse asserted druing touch
+ *
+ */
+enum pixcir_int_mode {
+	PIXCIR_INT_PERIODICAL,
+	PIXCIR_INT_DIFF_COORD,
+	PIXCIR_INT_LEVEL_TOUCH,
+	PIXCIR_INT_PULSE_TOUCH,
+};
+
+#define PIXCIR_INT_MODE_MASK	0x03
+#define PIXCIR_INT_ENABLE	(1UL << 3)
+#define PIXCIR_INT_POL_HIGH	(1UL << 2)
+
 struct pixcir_ts_platform_data {
-	int (*attb_read_val)(void);
 	int x_max;
 	int y_max;
+	int gpio_attb;		/* GPIO connected to ATTB line */
 };
 
 #endif

include/linux/input/touchscreen.h

+/*
+ * Copyright (c) 2014 Sebastian Reichel <sre@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _TOUCHSCREEN_H
+#define _TOUCHSCREEN_H
+
+#include <linux/input.h>
+
+#ifdef CONFIG_OF
+void touchscreen_parse_of_params(struct input_dev *dev);
+#else
+static inline void touchscreen_parse_of_params(struct input_dev *dev)
+{
+}
+#endif
+
+#endif

include/linux/platform_data/omap4-keypad.h

-#ifndef __LINUX_INPUT_OMAP4_KEYPAD_H
-#define __LINUX_INPUT_OMAP4_KEYPAD_H
-
-#include <linux/input/matrix_keypad.h>
-
-struct omap4_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-
-	u8 rows;
-	u8 cols;
-};
-
-#endif /* __LINUX_INPUT_OMAP4_KEYPAD_H */