Merge tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board updates from Olof Johansson:
 "This branch contains board updates, mostly for shmobile, but also a
  couple for PXA.

  The shmobile platforms are still in the early stages of DT enablement,
  so there's a bit more updates here than we'd ideally want to see:
   - regulator updates to provide some fixed regulators on several
     boards
   - gpio support updates for multiple boards
   - misc updates for recently-introduced boards armadillo800eva and
     kzm9g
   - defconfig updates"

* tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER
  ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace
  ARM: shmobile: armadillo800eva: A3SP domain includes USB
  ARM: shmobile: armadillo800eva: A4LC domain includes LCDC
  ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode
  ARM: mach-shmobile: kzm9d: Add defconfig
  ARM: mach-shmobile: select the fixed regulator driver on several boards
  ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g
  ARM: pxa: hx4700: Use DEFINE_RES_* macros consistently
  ARM: pxa: remove eseries.h
  ARM: mach-shmobile: add fixed voltage regulators to marzen
  ARM: mach-shmobile: add fixed voltage regulators to kzm9g
  ARM: mach-shmobile: add fixed voltage regulators to kzm9d
  ARM: mach-shmobile: add fixed voltage regulators to kota2
  ARM: mach-shmobile: add fixed voltage regulators to g4evm
  ARM: mach-shmobile: add fixed voltage regulators to bonito
  ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva
  ARM: mach-shmobile: add fixed voltage regulators to ap4evb
  ARM: mach-shmobile: add fixed voltage regulators to ag5evm
  ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel
  ...

arch/arm/configs/armadillo800eva_defconfig

@@ -5,10 +5,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -21,7 +18,7 @@ CONFIG_ARCH_SHMOBILE=y
 CONFIG_ARCH_R8A7740=y
 CONFIG_MACH_ARMADILLO800EVA=y
 # CONFIG_SH_TIMER_TMU is not set
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 CONFIG_CPU_BPREDICT_DISABLE=y
 # CONFIG_CACHE_L2X0 is not set
 CONFIG_ARM_ERRATA_430973=y
@@ -39,6 +36,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
+CONFIG_VFP=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_SUSPEND is not set
 CONFIG_NET=y
@@ -89,26 +87,32 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_HWMON is not set
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_RC_CORE is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9T112=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_SH_MOBILE_HDMI=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_SOC=y
 CONFIG_SND_SOC_SH4_FSI=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_RENESAS_USBHS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=y
@@ -116,6 +120,8 @@ CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_SH_MMCIF=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_DNOTIFY is not set
@@ -124,7 +130,6 @@ CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFS_V4_1=y

arch/arm/configs/kzm9d_defconfig

+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_EMEV2=y
+CONFIG_MACH_KZM9D=y
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x10000000
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_SWP_EMULATE is not set
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_LOCAL_TIMERS is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_CMDLINE="console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_EM=y
+# CONFIG_HWMON is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_FTRACE is not set

arch/arm/configs/kzm9g_defconfig

@@ -100,7 +100,12 @@ CONFIG_SND_SOC_SH4_FSI=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_RENESAS_USBHS=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_SDHI=y
@@ -108,12 +113,13 @@ CONFIG_MMC_SH_MMCIF=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
 CONFIG_DMADEVICES=y
 CONFIG_SH_DMAE=y
 CONFIG_ASYNC_TX_DMA=y
 CONFIG_STAGING=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
+CONFIG_INOTIFY_USER=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set

arch/arm/mach-pxa/eseries.h

-void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi);
-
-extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
-extern struct pxaficp_platform_data e7xx_ficp_platform_data;
-extern int e7xx_irda_init(void);
-
-extern int eseries_tmio_enable(struct platform_device *dev);
-extern int eseries_tmio_disable(struct platform_device *dev);
-extern int eseries_tmio_suspend(struct platform_device *dev);
-extern int eseries_tmio_resume(struct platform_device *dev);
-extern void eseries_get_tmio_gpios(void);
-extern struct resource eseries_tmio_resources[];
-extern struct platform_device e300_tc6387xb_device;
-

arch/arm/mach-pxa/hx4700.c

@@ -296,27 +296,11 @@ static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
 
 static struct resource asic3_resources[] = {
 	/* GPIO part */
-	[0] = {
-		.start	= ASIC3_PHYS,
-		.end	= ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(ASIC3_PHYS, ASIC3_MAP_SIZE_16BIT),
+	[1] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ)),
 	/* SD part */
-	[2] = {
-		.start	= ASIC3_SD_PHYS,
-		.end	= ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
-		.flags	= IORESOURCE_IRQ,
-	},
+	[2] = DEFINE_RES_MEM(ASIC3_SD_PHYS, ASIC3_MAP_SIZE_16BIT),
+	[3] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ)),
 };
 
 static struct asic3_platform_data asic3_platform_data = {
@@ -343,11 +327,7 @@ static struct platform_device asic3 = {
  */
 
 static struct resource egpio_resources[] = {
-	[0] = {
-		.start = PXA_CS5_PHYS,
-		.end   = PXA_CS5_PHYS + 0x4 - 1,
-		.flags = IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(PXA_CS5_PHYS, 0x4),
 };
 
 static struct htc_egpio_chip egpio_chips[] = {
@@ -537,11 +517,7 @@ static struct w100fb_mach_info w3220_info = {
 };
 
 static struct resource w3220_resources[] = {
-	[0] = {
-		.start	= ATI_W3220_PHYS,
-		.end	= ATI_W3220_PHYS + 0x00ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(ATI_W3220_PHYS, SZ_16M),
 };
 
 static struct platform_device w3220 = {
@@ -683,20 +659,12 @@ static struct pda_power_pdata power_supply_info = {
 };
 
 static struct resource power_supply_resources[] = {
-	[0] = {
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
-		.end   = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
-	},
-	[1] = {
-		.name  = "usb",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
-		.end   = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
-	},
+	[0] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), 1, "ac",
+		IORESOURCE_IRQ |
+		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
+	[1] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), 1, "usb",
+		IORESOURCE_IRQ |
+		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
 };
 
 static struct platform_device power_supply = {

arch/arm/mach-shmobile/Kconfig

@@ -59,6 +59,7 @@ config MACH_G4EVM
 	bool "G4EVM board"
 	depends on ARCH_SH7377
 	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_AP4EVB
 	bool "AP4EVB board"
@@ -66,6 +67,7 @@ config MACH_AP4EVB
 	select ARCH_REQUIRE_GPIOLIB
 	select SH_LCD_MIPI_DSI
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 choice
 	prompt "AP4EVB LCD panel selection"
@@ -84,6 +86,7 @@ config MACH_AG5EVM
 	bool "AG5EVM board"
 	select ARCH_REQUIRE_GPIOLIB
 	select SH_LCD_MIPI_DSI
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	depends on ARCH_SH73A0
 
 config MACH_MACKEREL
@@ -91,15 +94,18 @@ config MACH_MACKEREL
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_KOTA2
 	bool "KOTA2 board"
 	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	depends on ARCH_SH73A0
 
 config MACH_BONITO
 	bool "bonito board"
 	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	depends on ARCH_R8A7740
 
 config MACH_ARMADILLO800EVA
@@ -107,22 +113,28 @@ config MACH_ARMADILLO800EVA
 	depends on ARCH_R8A7740
 	select ARCH_REQUIRE_GPIOLIB
 	select USE_OF
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_KZM9D
 	bool "KZM9D board"
 	depends on ARCH_EMEV2
 	select USE_OF
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0
 	select ARCH_REQUIRE_GPIOLIB
 	select USE_OF
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 comment "SH-Mobile System Configuration"
 

arch/arm/mach-shmobile/board-ag5evm.c

@@ -27,6 +27,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/serial_sci.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
@@ -52,6 +54,12 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
 
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
 static struct resource smsc9220_resources[] = {
 	[0] = {
 		.start		= 0x14000000,
@@ -142,6 +150,13 @@ static struct platform_device fsi_device = {
 	.resource	= fsi_resources,
 };
 
+/* Fixed 1.8V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
 static struct resource sh_mmcif_resources[] = {
 	[0] = {
 		.name	= "MMCIF",
@@ -364,6 +379,13 @@ static struct platform_device mipidsi0_device = {
 	},
 };
 
+/* Fixed 2.8V regulators to be used by SDHI0 */
+static struct regulator_consumer_supply fixed2v8_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
 /* SDHI0 */
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
@@ -408,8 +430,57 @@ static struct platform_device sdhi0_device = {
 	},
 };
 
-void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
+/* Fixed 3.3V regulator to be used by SDHI1 */
+static struct regulator_consumer_supply cn4_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct regulator_init_data cn4_power_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(cn4_power_consumers),
+	.consumer_supplies      = cn4_power_consumers,
+};
+
+static struct fixed_voltage_config cn4_power_info = {
+	.supply_name = "CN4 SD/MMC Vdd",
+	.microvolts = 3300000,
+	.gpio = GPIO_PORT114,
+	.enable_high = 1,
+	.init_data = &cn4_power_init_data,
+};
+
+static struct platform_device cn4_power = {
+	.name = "reg-fixed-voltage",
+	.id   = 2,
+	.dev  = {
+		.platform_data = &cn4_power_info,
+	},
+};
+
+static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 {
+	static int power_gpio = -EINVAL;
+
+	if (power_gpio < 0) {
+		int ret = gpio_request(GPIO_PORT114, "sdhi1_power");
+		if (!ret) {
+			power_gpio = GPIO_PORT114;
+			gpio_direction_output(power_gpio, 0);
+		}
+	}
+
+	/*
+	 * If requesting the GPIO above failed, it means, that the regulator got
+	 * probed and grabbed the GPIO, but we don't know, whether the sdhi
+	 * driver already uses the regulator. If it doesn't, we have to toggle
+	 * the GPIO ourselves, even though it is now owned by the fixed
+	 * regulator driver. We have to live with the race in case the driver
+	 * gets unloaded and the GPIO freed between these two steps.
+	 */
 	gpio_set_value(GPIO_PORT114, state);
 }
 
@@ -455,6 +526,7 @@ static struct platform_device sdhi1_device = {
 };
 
 static struct platform_device *ag5evm_devices[] __initdata = {
+	&cn4_power,
 	&eth_device,
 	&keysc_device,
 	&fsi_device,
@@ -468,6 +540,12 @@ static struct platform_device *ag5evm_devices[] __initdata = {
 
 static void __init ag5evm_init(void)
 {
+	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+	regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
+				     ARRAY_SIZE(fixed2v8_power_consumers), 3300000);
+	regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	sh73a0_pinmux_init();
 
 	/* enable SCIFA2 */
@@ -562,8 +640,6 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
 	gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
 	gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
-	gpio_request(GPIO_PORT114, "sdhi1_power");
-	gpio_direction_output(GPIO_PORT114, 0);
 
 #ifdef CONFIG_CACHE_L2X0
 	/* Shared attribute override enable, 64K*8way */

arch/arm/mach-shmobile/board-ap4evb.c

@@ -34,6 +34,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c/tsc2007.h>
 #include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/sh_clk.h>
@@ -159,6 +161,27 @@
  * CN12: 3.3v
  */
 
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
+{
+	/* J22 default position: 1.8V */
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
 /* MTD */
 static struct mtd_partition nor_flash_partitions[] = {
 	{
@@ -1138,21 +1161,6 @@ static void __init fsi_init_pm_clock(void)
 	clk_put(fsia_ick);
 }
 
-/*
- * FIXME !!
- *
- * gpio_no_direction
- * are quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_no_direction(u32 addr)
-{
-	__raw_writeb(0x00, addr);
-}
-
 /* TouchScreen */
 #ifdef CONFIG_AP4EVB_QHD
 # define GPIO_TSC_IRQ	GPIO_FN_IRQ28_123
@@ -1224,6 +1232,12 @@ static void __init ap4evb_init(void)
 	u32 srcr4;
 	struct clk *clk;
 
+	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	/* External clock source */
 	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
 
@@ -1302,8 +1316,8 @@ static void __init ap4evb_init(void)
 
 	gpio_request(GPIO_PORT9, NULL);
 	gpio_request(GPIO_PORT10, NULL);
-	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
-	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+	gpio_direction_none(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
+	gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
 
 	/* card detect pin for MMC slot (CN7) */
 	gpio_request(GPIO_PORT41, NULL);

arch/arm/mach-shmobile/board-bonito.c

@@ -26,6 +26,8 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/videodev2.h>
 #include <mach/common.h>
@@ -75,6 +77,12 @@
  * S38.2 = OFF
  */
 
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
 /*
  * FPGA
  */
@@ -360,6 +368,8 @@ static void __init bonito_init(void)
 {
 	u16 val;
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	r8a7740_pinmux_init();
 	bonito_fpga_init();
 

arch/arm/mach-shmobile/board-g4evm.c

@@ -26,6 +26,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/io.h>
 #include <linux/input.h>
@@ -196,6 +198,15 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
 /* SDHI */
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.tmio_caps	= MMC_CAP_SDIO_IRQ,
@@ -271,26 +282,11 @@ static struct platform_device *g4evm_devices[] __initdata = {
 #define GPIO_SDHID1_D3	0xe6052106
 #define GPIO_SDHICMD1	0xe6052107
 
-/*
- * FIXME !!
- *
- * gpio_pull_up is quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_pull_up(u32 addr)
-{
-	u8 data = __raw_readb(addr);
-
-	data &= 0x0F;
-	data |= 0xC0;
-	__raw_writeb(data, addr);
-}
-
 static void __init g4evm_init(void)
 {
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
 	sh7377_pinmux_init();
 
 	/* Lit DS14 LED */
@@ -351,11 +347,11 @@ static void __init g4evm_init(void)
 	gpio_request(GPIO_FN_SDHID0_3, NULL);
 	gpio_request(GPIO_FN_SDHICMD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
-	gpio_pull_up(GPIO_SDHID0_D0);
-	gpio_pull_up(GPIO_SDHID0_D1);
-	gpio_pull_up(GPIO_SDHID0_D2);
-	gpio_pull_up(GPIO_SDHID0_D3);
-	gpio_pull_up(GPIO_SDHICMD0);
+	gpio_request_pullup(GPIO_SDHID0_D0);
+	gpio_request_pullup(GPIO_SDHID0_D1);
+	gpio_request_pullup(GPIO_SDHID0_D2);
+	gpio_request_pullup(GPIO_SDHID0_D3);
+	gpio_request_pullup(GPIO_SDHICMD0);
 
 	/* SDHI1 */
 	gpio_request(GPIO_FN_SDHICLK1, NULL);
@@ -364,11 +360,11 @@ static void __init g4evm_init(void)
 	gpio_request(GPIO_FN_SDHID1_2, NULL);
 	gpio_request(GPIO_FN_SDHID1_3, NULL);
 	gpio_request(GPIO_FN_SDHICMD1, NULL);
-	gpio_pull_up(GPIO_SDHID1_D0);
-	gpio_pull_up(GPIO_SDHID1_D1);
-	gpio_pull_up(GPIO_SDHID1_D2);
-	gpio_pull_up(GPIO_SDHID1_D3);
-	gpio_pull_up(GPIO_SDHICMD1);
+	gpio_request_pullup(GPIO_SDHID1_D0);
+	gpio_request_pullup(GPIO_SDHID1_D1);
+	gpio_request_pullup(GPIO_SDHID1_D2);
+	gpio_request_pullup(GPIO_SDHID1_D3);
+	gpio_request_pullup(GPIO_SDHICMD1);
 
 	sh7377_add_standard_devices();
 

arch/arm/mach-shmobile/board-kota2.c

@@ -27,6 +27,8 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
@@ -49,6 +51,12 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
 
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
 /* SMSC 9220 */
 static struct resource smsc9220_resources[] = {
 	[0] = {
@@ -288,6 +296,13 @@ static struct platform_device leds_tpu30_device = {
 	.resource	= tpu30_resources,
 };
 
+/* Fixed 1.8V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
 /* MMCIF */
 static struct resource mmcif_resources[] = {
 	[0] = {
@@ -321,6 +336,15 @@ static struct platform_device mmcif_device = {
 	.resource       = mmcif_resources,
 };
 
+/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
 /* SDHI0 */
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.tmio_caps      = MMC_CAP_SD_HIGHSPEED,
@@ -411,6 +435,12 @@ static struct platform_device *kota2_devices[] __initdata = {
 
 static void __init kota2_init(void)
 {
+	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	sh73a0_pinmux_init();
 
 	/* SCIFA2 (UART2) */

arch/arm/mach-shmobile/board-kzm9d.c

@@ -21,6 +21,8 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <mach/common.h>
 #include <mach/emev2.h>
@@ -28,6 +30,12 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
 
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
 /* Ether */
 static struct resource smsc911x_resources[] = {
 	[0] = {
@@ -63,6 +71,8 @@ static struct platform_device *kzm9d_devices[] __initdata = {
 
 void __init kzm9d_add_standard_devices(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	emev2_add_standard_devices();
 
 	platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices));

arch/arm/mach-shmobile/board-mackerel.c

@@ -41,6 +41,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
 #include <linux/pm_clock.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
@@ -203,31 +205,32 @@
  * amixer set "HPOUTR Mixer DACH" on
  */
 
-/*
- * FIXME !!
- *
- * gpio_no_direction
- * gpio_pull_down
- * are quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_no_direction(u32 addr)
+/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
 {
-	__raw_writeb(0x00, addr);
-}
+	/*
+	 * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V
+	 * Since we cannot support both voltages, we support the default 1.8V
+	 */
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
 
-static void __init gpio_pull_down(u32 addr)
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
 {
-	u8 data = __raw_readb(addr);
-
-	data &= 0x0F;
-	data |= 0xA0;
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
+};
 
-	__raw_writeb(data, addr);
-}
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
 
 /* MTD */
 static struct mtd_partition nor_flash_partitions[] = {
@@ -1409,6 +1412,12 @@ static void __init mackerel_init(void)
 	u32 srcr4;
 	struct clk *clk;
 
+	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	/* External clock source */
 	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
 
@@ -1458,11 +1467,11 @@ static void __init mackerel_init(void)
 
 	/* USBHS0 */
 	gpio_request(GPIO_FN_VBUS0_0, NULL);
-	gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
+	gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */
 
 	/* USBHS1 */
 	gpio_request(GPIO_FN_VBUS0_1, NULL);
-	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+	gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */
 	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
 	/* enable FSI2 port A (ak4643) */
@@ -1475,8 +1484,8 @@ static void __init mackerel_init(void)
 
 	gpio_request(GPIO_PORT9,  NULL);
 	gpio_request(GPIO_PORT10, NULL);
-	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
-	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+	gpio_direction_none(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
+	gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
 
 	intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
 

arch/arm/mach-shmobile/board-marzen.c

@@ -27,6 +27,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/dma-mapping.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
@@ -37,6 +39,12 @@
 #include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
 /* SMSC LAN89218 */
 static struct resource smsc911x_resources[] = {
 	[0] = {
@@ -73,6 +81,8 @@ static struct platform_device *marzen_devices[] __initdata = {
 
 static void __init marzen_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	r8a7779_pinmux_init();
 
 	/* SCIF2 (CN18: DEBUG0) */