Commit f8101c74 authored by Sanyog Kale's avatar Sanyog Kale Committed by Vinod Koul

soundwire: Add Master and Slave port programming

Master and Slave port registers need to be programmed for each port
used in a stream. Add the helpers for port register programming.
Signed-off-by: default avatarSanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: default avatarShreyas NC <shreyas.nc@intel.com>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent bbe7379d
......@@ -106,6 +106,10 @@ struct sdw_master_runtime {
struct list_head bus_node;
};
struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
enum sdw_data_direction direction,
unsigned int port_num);
int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg);
int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg,
struct sdw_defer *defer);
......
......@@ -11,9 +11,238 @@
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/soundwire/sdw_registers.h>
#include <linux/soundwire/sdw.h>
#include "bus.h"
static int _sdw_program_slave_port_params(struct sdw_bus *bus,
struct sdw_slave *slave,
struct sdw_transport_params *t_params,
enum sdw_dpn_type type)
{
u32 addr1, addr2, addr3, addr4;
int ret;
u16 wbuf;
if (bus->params.next_bank) {
addr1 = SDW_DPN_OFFSETCTRL2_B1(t_params->port_num);
addr2 = SDW_DPN_BLOCKCTRL3_B1(t_params->port_num);
addr3 = SDW_DPN_SAMPLECTRL2_B1(t_params->port_num);
addr4 = SDW_DPN_HCTRL_B1(t_params->port_num);
} else {
addr1 = SDW_DPN_OFFSETCTRL2_B0(t_params->port_num);
addr2 = SDW_DPN_BLOCKCTRL3_B0(t_params->port_num);
addr3 = SDW_DPN_SAMPLECTRL2_B0(t_params->port_num);
addr4 = SDW_DPN_HCTRL_B0(t_params->port_num);
}
/* Program DPN_OffsetCtrl2 registers */
ret = sdw_write(slave, addr1, t_params->offset2);
if (ret < 0) {
dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed");
return ret;
}
/* Program DPN_BlockCtrl3 register */
ret = sdw_write(slave, addr2, t_params->blk_pkg_mode);
if (ret < 0) {
dev_err(bus->dev, "DPN_BlockCtrl3 register write failed");
return ret;
}
/*
* Data ports are FULL, SIMPLE and REDUCED. This function handles
* FULL and REDUCED only and and beyond this point only FULL is
* handled, so bail out if we are not FULL data port type
*/
if (type != SDW_DPN_FULL)
return ret;
/* Program DPN_SampleCtrl2 register */
wbuf = (t_params->sample_interval - 1);
wbuf &= SDW_DPN_SAMPLECTRL_HIGH;
wbuf >>= SDW_REG_SHIFT(SDW_DPN_SAMPLECTRL_HIGH);
ret = sdw_write(slave, addr3, wbuf);
if (ret < 0) {
dev_err(bus->dev, "DPN_SampleCtrl2 register write failed");
return ret;
}
/* Program DPN_HCtrl register */
wbuf = t_params->hstart;
wbuf <<= SDW_REG_SHIFT(SDW_DPN_HCTRL_HSTART);
wbuf |= t_params->hstop;
ret = sdw_write(slave, addr4, wbuf);
if (ret < 0)
dev_err(bus->dev, "DPN_HCtrl register write failed");
return ret;
}
static int sdw_program_slave_port_params(struct sdw_bus *bus,
struct sdw_slave_runtime *s_rt,
struct sdw_port_runtime *p_rt)
{
struct sdw_transport_params *t_params = &p_rt->transport_params;
struct sdw_port_params *p_params = &p_rt->port_params;
struct sdw_slave_prop *slave_prop = &s_rt->slave->prop;
u32 addr1, addr2, addr3, addr4, addr5, addr6;
struct sdw_dpn_prop *dpn_prop;
int ret;
u8 wbuf;
dpn_prop = sdw_get_slave_dpn_prop(s_rt->slave,
s_rt->direction,
t_params->port_num);
if (!dpn_prop)
return -EINVAL;
addr1 = SDW_DPN_PORTCTRL(t_params->port_num);
addr2 = SDW_DPN_BLOCKCTRL1(t_params->port_num);
if (bus->params.next_bank) {
addr3 = SDW_DPN_SAMPLECTRL1_B1(t_params->port_num);
addr4 = SDW_DPN_OFFSETCTRL1_B1(t_params->port_num);
addr5 = SDW_DPN_BLOCKCTRL2_B1(t_params->port_num);
addr6 = SDW_DPN_LANECTRL_B1(t_params->port_num);
} else {
addr3 = SDW_DPN_SAMPLECTRL1_B0(t_params->port_num);
addr4 = SDW_DPN_OFFSETCTRL1_B0(t_params->port_num);
addr5 = SDW_DPN_BLOCKCTRL2_B0(t_params->port_num);
addr6 = SDW_DPN_LANECTRL_B0(t_params->port_num);
}
/* Program DPN_PortCtrl register */
wbuf = p_params->data_mode << SDW_REG_SHIFT(SDW_DPN_PORTCTRL_DATAMODE);
wbuf |= p_params->flow_mode;
ret = sdw_update(s_rt->slave, addr1, 0xF, wbuf);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_PortCtrl register write failed for port %d",
t_params->port_num);
return ret;
}
/* Program DPN_BlockCtrl1 register */
ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1));
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_BlockCtrl1 register write failed for port %d",
t_params->port_num);
return ret;
}
/* Program DPN_SampleCtrl1 register */
wbuf = (t_params->sample_interval - 1) & SDW_DPN_SAMPLECTRL_LOW;
ret = sdw_write(s_rt->slave, addr3, wbuf);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_SampleCtrl1 register write failed for port %d",
t_params->port_num);
return ret;
}
/* Program DPN_OffsetCtrl1 registers */
ret = sdw_write(s_rt->slave, addr4, t_params->offset1);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_OffsetCtrl1 register write failed for port %d",
t_params->port_num);
return ret;
}
/* Program DPN_BlockCtrl2 register*/
if (t_params->blk_grp_ctrl_valid) {
ret = sdw_write(s_rt->slave, addr5, t_params->blk_grp_ctrl);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_BlockCtrl2 reg write failed for port %d",
t_params->port_num);
return ret;
}
}
/* program DPN_LaneCtrl register */
if (slave_prop->lane_control_support) {
ret = sdw_write(s_rt->slave, addr6, t_params->lane_ctrl);
if (ret < 0) {
dev_err(&s_rt->slave->dev,
"DPN_LaneCtrl register write failed for port %d",
t_params->port_num);
return ret;
}
}
if (dpn_prop->type != SDW_DPN_SIMPLE) {
ret = _sdw_program_slave_port_params(bus, s_rt->slave,
t_params, dpn_prop->type);
if (ret < 0)
dev_err(&s_rt->slave->dev,
"Transport reg write failed for port: %d",
t_params->port_num);
}
return ret;
}
static int sdw_program_master_port_params(struct sdw_bus *bus,
struct sdw_port_runtime *p_rt)
{
int ret;
/*
* we need to set transport and port parameters for the port.
* Transport parameters refers to the smaple interval, offsets and
* hstart/stop etc of the data. Port parameters refers to word
* length, flow mode etc of the port
*/
ret = bus->port_ops->dpn_set_port_transport_params(bus,
&p_rt->transport_params,
bus->params.next_bank);
if (ret < 0)
return ret;
return bus->port_ops->dpn_set_port_params(bus,
&p_rt->port_params,
bus->params.next_bank);
}
/**
* sdw_program_port_params() - Programs transport parameters of Master(s)
* and Slave(s)
*
* @m_rt: Master stream runtime
*/
static int sdw_program_port_params(struct sdw_master_runtime *m_rt)
{
struct sdw_slave_runtime *s_rt = NULL;
struct sdw_bus *bus = m_rt->bus;
struct sdw_port_runtime *p_rt;
int ret = 0;
/* Program transport & port parameters for Slave(s) */
list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
list_for_each_entry(p_rt, &s_rt->port_list, port_node) {
ret = sdw_program_slave_port_params(bus, s_rt, p_rt);
if (ret < 0)
return ret;
}
}
/* Program transport & port parameters for Master(s) */
list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
ret = sdw_program_master_port_params(bus, p_rt);
if (ret < 0)
return ret;
}
return 0;
}
/**
* sdw_release_stream() - Free the assigned stream runtime
*
......@@ -498,3 +727,36 @@ int sdw_stream_add_slave(struct sdw_slave *slave,
return ret;
}
EXPORT_SYMBOL(sdw_stream_add_slave);
/**
* sdw_get_slave_dpn_prop() - Get Slave port capabilities
*
* @slave: Slave handle
* @direction: Data direction.
* @port_num: Port number
*/
struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
enum sdw_data_direction direction,
unsigned int port_num)
{
struct sdw_dpn_prop *dpn_prop;
u8 num_ports;
int i;
if (direction == SDW_DATA_DIR_TX) {
num_ports = hweight32(slave->prop.source_ports);
dpn_prop = slave->prop.src_dpn_prop;
} else {
num_ports = hweight32(slave->prop.sink_ports);
dpn_prop = slave->prop.sink_dpn_prop;
}
for (i = 0; i < num_ports; i++) {
dpn_prop = &dpn_prop[i];
if (dpn_prop->num == port_num)
return &dpn_prop[i];
}
return NULL;
}
......@@ -367,7 +367,30 @@ struct sdw_slave_intr_status {
};
/**
* struct sdw_slave_ops - Slave driver callback ops
* sdw_reg_bank - SoundWire register banks
* @SDW_BANK0: Soundwire register bank 0
* @SDW_BANK1: Soundwire register bank 1
*/
enum sdw_reg_bank {
SDW_BANK0,
SDW_BANK1,
};
/**
* struct sdw_bus_params: Structure holding bus configuration
*
* @curr_bank: Current bank in use (BANK0/BANK1)
* @next_bank: Next bank to use (BANK0/BANK1). next_bank will always be
* set to !curr_bank
*/
struct sdw_bus_params {
enum sdw_reg_bank curr_bank;
enum sdw_reg_bank next_bank;
};
/**
* struct sdw_slave_ops: Slave driver callback ops
*
* @read_prop: Read Slave properties
* @interrupt_callback: Device interrupt notification (invoked in thread
* context)
......@@ -482,6 +505,24 @@ struct sdw_transport_params {
unsigned int lane_ctrl;
};
/**
* struct sdw_master_port_ops: Callback functions from bus to Master
* driver to set Master Data ports.
*
* @dpn_set_port_params: Set the Port parameters for the Master Port.
* Mandatory callback
* @dpn_set_port_transport_params: Set transport parameters for the Master
* Port. Mandatory callback
*/
struct sdw_master_port_ops {
int (*dpn_set_port_params)(struct sdw_bus *bus,
struct sdw_port_params *port_params,
unsigned int bank);
int (*dpn_set_port_transport_params)(struct sdw_bus *bus,
struct sdw_transport_params *transport_params,
enum sdw_reg_bank bank);
};
struct sdw_msg;
/**
......@@ -525,6 +566,8 @@ struct sdw_master_ops {
* @bus_lock: bus lock
* @msg_lock: message lock
* @ops: Master callback ops
* @port_ops: Master port callback ops
* @params: Current bus parameters
* @prop: Master properties
* @m_rt_list: List of Master instance of all stream(s) running on Bus. This
* is used to compute and program bus bandwidth, clock, frame shape,
......@@ -540,6 +583,8 @@ struct sdw_bus {
struct mutex bus_lock;
struct mutex msg_lock;
const struct sdw_master_ops *ops;
const struct sdw_master_port_ops *port_ops;
struct sdw_bus_params params;
struct sdw_master_prop prop;
struct list_head m_rt_list;
struct sdw_defer defer_msg;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment