Commit f87c8e80 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: asix: Fix AX88772 device PHY selection
  USB: usblp.c - add Kyocera Mita FS 820 to list of "quirky" printers
  sisusb_con warning fixes
  USB: Fixed bug in endpoint release function.
  USB: small update to Documentation/usb/acm.txt
  USB storage: fix ipod ejecting issue
  USB Storage: unusual_devs: add supertop drives
  USB: omap_udc build fixes (sync with linux-omap)
  USB: funsoft is borken on sparc
  USB: fix interaction between different interfaces in an "Option" usb device
  UHCI: support device_may_wakeup
  UHCI: make test for ASUS motherboard more specific
parents 91f7b5c4 14e51f28
......@@ -46,6 +46,10 @@ Abstract Control Model (USB CDC ACM) specification.
3Com USR ISDN Pro TA
Some cell phones also connect via USB. I know the following phones work:
SonyEricsson K800i
Unfortunately many modems and most ISDN TAs use proprietary interfaces and
thus won't work with this drivers. Check for ACM compliance before buying.
......
......@@ -217,6 +217,7 @@ static const struct quirk_printer_struct quirk_printers[] = {
{ 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
{ 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
{ 0, 0 }
};
......
......@@ -268,6 +268,7 @@ static void ep_device_release(struct device *dev)
struct ep_device *ep_dev = to_ep_device(dev);
dev_dbg(dev, "%s called for %s\n", __FUNCTION__, dev->bus_id);
endpoint_free_minor(ep_dev);
kfree(ep_dev);
}
......@@ -349,7 +350,6 @@ void usb_remove_ep_files(struct usb_host_endpoint *endpoint)
sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
sysfs_remove_link(&ep_dev->dev.parent->kobj, name);
sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
endpoint_free_minor(ep_dev);
device_unregister(&ep_dev->dev);
endpoint->ep_dev = NULL;
destroy_endpoint_class();
......
......@@ -42,6 +42,7 @@
#include <linux/usb_gadget.h>
#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <asm/byteorder.h>
#include <asm/io.h>
......@@ -60,6 +61,11 @@
/* bulk DMA seems to be behaving for both IN and OUT */
#define USE_DMA
/* FIXME: OMAP2 currently has some problem in DMA mode */
#ifdef CONFIG_ARCH_OMAP2
#undef USE_DMA
#endif
/* ISO too */
#define USE_ISO
......@@ -99,7 +105,7 @@ static unsigned fifo_mode = 0;
* boot parameter "omap_udc:fifo_mode=42"
*/
module_param (fifo_mode, uint, 0);
MODULE_PARM_DESC (fifo_mode, "endpoint setup (0 == default)");
MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
#ifdef USE_DMA
static unsigned use_dma = 1;
......@@ -542,9 +548,9 @@ static inline dma_addr_t dma_csac(unsigned lch)
/* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
csac = omap_readw(OMAP_DMA_CSAC(lch));
csac = OMAP_DMA_CSAC_REG(lch);
if (csac == 0)
csac = omap_readw(OMAP_DMA_CSAC(lch));
csac = OMAP_DMA_CSAC_REG(lch);
return csac;
}
......@@ -555,9 +561,9 @@ static inline dma_addr_t dma_cdac(unsigned lch)
/* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
cdac = omap_readw(OMAP_DMA_CDAC(lch));
cdac = OMAP_DMA_CDAC_REG(lch);
if (cdac == 0)
cdac = omap_readw(OMAP_DMA_CDAC(lch));
cdac = OMAP_DMA_CDAC_REG(lch);
return cdac;
}
......@@ -582,7 +588,7 @@ static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
}
#define DMA_DEST_LAST(x) (cpu_is_omap15xx() \
? omap_readw(OMAP_DMA_CSAC(x)) /* really: CPC */ \
? OMAP_DMA_CSAC_REG(x) /* really: CPC */ \
: dma_cdac(x))
static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
......@@ -620,17 +626,19 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
|| (cpu_is_omap15xx() && length < ep->maxpacket)) {
txdma_ctrl = UDC_TXN_EOT | length;
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
length, 1, sync_mode);
length, 1, sync_mode, 0, 0);
} else {
length = min(length / ep->maxpacket,
(unsigned) UDC_TXN_TSC + 1);
txdma_ctrl = length;
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
ep->ep.maxpacket >> 1, length, sync_mode);
ep->ep.maxpacket >> 1, length, sync_mode,
0, 0);
length *= ep->maxpacket;
}
omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF,
OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
0, 0);
omap_start_dma(ep->lch);
ep->dma_counter = dma_csac(ep->lch);
......@@ -675,9 +683,11 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
req->dma_bytes = packets * ep->ep.maxpacket;
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
ep->ep.maxpacket >> 1, packets,
OMAP_DMA_SYNC_ELEMENT);
OMAP_DMA_SYNC_ELEMENT,
0, 0);
omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
0, 0);
ep->dma_counter = DMA_DEST_LAST(ep->lch);
UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1);
......@@ -820,7 +830,8 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
omap_set_dma_dest_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG));
(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
0, 0);
}
} else {
status = omap_request_dma(OMAP_DMA_USB_W2FC_RX0 - 1 + channel,
......@@ -831,7 +842,8 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
omap_set_dma_src_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG));
(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
0, 0);
/* EMIFF */
omap_set_dma_dest_burst_mode(ep->lch,
OMAP_DMA_DATA_BURST_4);
......@@ -846,7 +858,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
/* channel type P: hw synch (fifo) */
if (!cpu_is_omap15xx())
omap_writew(2, OMAP_DMA_LCH_CTRL(ep->lch));
OMAP1_DMA_LCH_CTRL_REG(ep->lch) = 2;
}
just_restart:
......@@ -893,7 +905,7 @@ static void dma_channel_release(struct omap_ep *ep)
else
req = NULL;
active = ((1 << 7) & omap_readl(OMAP_DMA_CCR(ep->lch))) != 0;
active = ((1 << 7) & OMAP_DMA_CCR_REG(ep->lch)) != 0;
DBG("%s release %s %cxdma%d %p\n", ep->ep.name,
active ? "active" : "idle",
......@@ -1298,6 +1310,23 @@ static void pullup_disable(struct omap_udc *udc)
UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
}
static struct omap_udc *udc;
static void omap_udc_enable_clock(int enable)
{
if (udc == NULL || udc->dc_clk == NULL || udc->hhc_clk == NULL)
return;
if (enable) {
clk_enable(udc->dc_clk);
clk_enable(udc->hhc_clk);
udelay(100);
} else {
clk_disable(udc->hhc_clk);
clk_disable(udc->dc_clk);
}
}
/*
* Called by whatever detects VBUS sessions: external transceiver
* driver, or maybe GPIO0 VBUS IRQ. May request 48 MHz clock.
......@@ -1318,10 +1347,22 @@ static int omap_vbus_session(struct usb_gadget *gadget, int is_active)
else
FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510;
}
if (udc->dc_clk != NULL && is_active) {
if (!udc->clk_requested) {
omap_udc_enable_clock(1);
udc->clk_requested = 1;
}
}
if (can_pullup(udc))
pullup_enable(udc);
else
pullup_disable(udc);
if (udc->dc_clk != NULL && !is_active) {
if (udc->clk_requested) {
omap_udc_enable_clock(0);
udc->clk_requested = 0;
}
}
spin_unlock_irqrestore(&udc->lock, flags);
return 0;
}
......@@ -1866,7 +1907,7 @@ static void pio_out_timer(unsigned long _ep)
spin_lock_irqsave(&ep->udc->lock, flags);
if (!list_empty(&ep->queue) && ep->ackwait) {
use_ep(ep, 0);
use_ep(ep, UDC_EP_SEL);
stat_flg = UDC_STAT_FLG_REG;
if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN)
......@@ -1876,12 +1917,12 @@ static void pio_out_timer(unsigned long _ep)
VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg);
req = container_of(ep->queue.next,
struct omap_req, queue);
UDC_EP_NUM_REG = ep->bEndpointAddress | UDC_EP_SEL;
(void) read_fifo(ep, req);
UDC_EP_NUM_REG = ep->bEndpointAddress;
UDC_CTRL_REG = UDC_SET_FIFO_EN;
ep->ackwait = 1 + ep->double_buf;
}
} else
deselect_ep();
}
mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
spin_unlock_irqrestore(&ep->udc->lock, flags);
......@@ -2028,7 +2069,17 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
/*-------------------------------------------------------------------------*/
static struct omap_udc *udc;
static inline int machine_needs_vbus_session(void)
{
return (machine_is_omap_innovator()
|| machine_is_omap_osk()
|| machine_is_omap_apollon()
#ifndef CONFIG_MACH_OMAP_H4_OTG
|| machine_is_omap_h4()
#endif
|| machine_is_sx1()
);
}
int usb_gadget_register_driver (struct usb_gadget_driver *driver)
{
......@@ -2070,6 +2121,9 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
udc->gadget.dev.driver = &driver->driver;
spin_unlock_irqrestore(&udc->lock, flags);
if (udc->dc_clk != NULL)
omap_udc_enable_clock(1);
status = driver->bind (&udc->gadget);
if (status) {
DBG("bind to %s --> %d\n", driver->driver.name, status);
......@@ -2103,10 +2157,12 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
/* boards that don't have VBUS sensing can't autogate 48MHz;
* can't enter deep sleep while a gadget driver is active.
*/
if (machine_is_omap_innovator() || machine_is_omap_osk())
if (machine_needs_vbus_session())
omap_vbus_session(&udc->gadget, 1);
done:
if (udc->dc_clk != NULL)
omap_udc_enable_clock(0);
return status;
}
EXPORT_SYMBOL(usb_gadget_register_driver);
......@@ -2121,7 +2177,10 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
if (machine_is_omap_innovator() || machine_is_omap_osk())
if (udc->dc_clk != NULL)
omap_udc_enable_clock(1);
if (machine_needs_vbus_session())
omap_vbus_session(&udc->gadget, 0);
if (udc->transceiver)
......@@ -2137,6 +2196,8 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
udc->gadget.dev.driver = NULL;
udc->driver = NULL;
if (udc->dc_clk != NULL)
omap_udc_enable_clock(0);
DBG("unregistered driver '%s'\n", driver->driver.name);
return status;
}
......@@ -2228,11 +2289,18 @@ static int proc_otg_show(struct seq_file *s)
{
u32 tmp;
u32 trans;
char *ctrl_name;
tmp = OTG_REV_REG;
if (cpu_is_omap24xx()) {
ctrl_name = "control_devconf";
trans = CONTROL_DEVCONF_REG;
} else {
ctrl_name = "tranceiver_ctrl";
trans = USB_TRANSCEIVER_CTRL_REG;
seq_printf(s, "\nOTG rev %d.%d, transceiver_ctrl %05x\n",
tmp >> 4, tmp & 0xf, trans);
}
seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
tmp >> 4, tmp & 0xf, ctrl_name, trans);
tmp = OTG_SYSCON_1_REG;
seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
FOURBITS "\n", tmp,
......@@ -2315,11 +2383,16 @@ static int proc_udc_show(struct seq_file *s, void *_)
fifo_mode,
udc->driver ? udc->driver->driver.name : "(none)",
HMC,
udc->transceiver ? udc->transceiver->label : "(none)");
udc->transceiver
? udc->transceiver->label
: ((cpu_is_omap1710() || cpu_is_omap24xx())
? "external" : "(none)"));
if (cpu_class_is_omap1()) {
seq_printf(s, "ULPD control %04x req %04x status %04x\n",
__REG16(ULPD_CLOCK_CTRL),
__REG16(ULPD_SOFT_REQ),
__REG16(ULPD_STATUS_REQ));
}
/* OTG controller registers */
if (!cpu_is_omap15xx())
......@@ -2504,9 +2577,10 @@ omap_ep_setup(char *name, u8 addr, u8 type,
dbuf = 1;
} else {
/* double-buffering "not supported" on 15xx,
* and ignored for PIO-IN on 16xx
* and ignored for PIO-IN on newer chips
* (for more reliable behavior)
*/
if (!use_dma || cpu_is_omap15xx())
if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx())
dbuf = 0;
switch (maxp) {
......@@ -2709,6 +2783,8 @@ static int __init omap_udc_probe(struct platform_device *pdev)
struct otg_transceiver *xceiv = NULL;
const char *type = NULL;
struct omap_usb_config *config = pdev->dev.platform_data;
struct clk *dc_clk;
struct clk *hhc_clk;
/* NOTE: "knows" the order of the resources! */
if (!request_mem_region(pdev->resource[0].start,
......@@ -2718,6 +2794,26 @@ static int __init omap_udc_probe(struct platform_device *pdev)
return -EBUSY;
}
if (cpu_is_omap16xx()) {
dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck");
BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
/* can't use omap_udc_enable_clock yet */
clk_enable(dc_clk);
clk_enable(hhc_clk);
udelay(100);
}
if (cpu_is_omap24xx()) {
dc_clk = clk_get(&pdev->dev, "usb_fck");
hhc_clk = clk_get(&pdev->dev, "usb_l4_ick");
BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
/* can't use omap_udc_enable_clock yet */
clk_enable(dc_clk);
clk_enable(hhc_clk);
udelay(100);
}
INFO("OMAP UDC rev %d.%d%s\n",
UDC_REV_REG >> 4, UDC_REV_REG & 0xf,
config->otg ? ", Mini-AB" : "");
......@@ -2727,7 +2823,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
hmc = HMC_1510;
type = "(unknown)";
if (machine_is_omap_innovator()) {
if (machine_is_omap_innovator() || machine_is_sx1()) {
/* just set up software VBUS detect, and then
* later rig it so we always report VBUS.
* FIXME without really sensing VBUS, we can't
......@@ -2756,6 +2852,15 @@ static int __init omap_udc_probe(struct platform_device *pdev)
}
hmc = HMC_1610;
if (cpu_is_omap24xx()) {
/* this could be transceiverless in one of the
* "we don't need to know" modes.
*/
type = "external";
goto known;
}
switch (hmc) {
case 0: /* POWERUP DEFAULT == 0 */
case 4:
......@@ -2794,6 +2899,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
goto cleanup0;
}
}
known:
INFO("hmc mode %d, %s transceiver\n", hmc, type);
/* a "gadget" abstracts/virtualizes the controller */
......@@ -2818,8 +2924,8 @@ static int __init omap_udc_probe(struct platform_device *pdev)
status = request_irq(pdev->resource[1].start, omap_udc_irq,
IRQF_SAMPLE_RANDOM, driver_name, udc);
if (status != 0) {
ERR( "can't get irq %ld, err %d\n",
pdev->resource[1].start, status);
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[1].start, status);
goto cleanup1;
}
......@@ -2827,24 +2933,41 @@ static int __init omap_udc_probe(struct platform_device *pdev)
status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
if (status != 0) {
ERR( "can't get irq %ld, err %d\n",
pdev->resource[2].start, status);
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[2].start, status);
goto cleanup2;
}
#ifdef USE_ISO
status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
IRQF_DISABLED, "omap_udc iso", udc);
if (status != 0) {
ERR("can't get irq %ld, err %d\n",
pdev->resource[3].start, status);
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[3].start, status);
goto cleanup3;
}
#endif
if (cpu_is_omap16xx()) {
udc->dc_clk = dc_clk;
udc->hhc_clk = hhc_clk;
clk_disable(hhc_clk);
clk_disable(dc_clk);
}
if (cpu_is_omap24xx()) {
udc->dc_clk = dc_clk;
udc->hhc_clk = hhc_clk;
/* FIXME OMAP2 don't release hhc & dc clock */
#if 0
clk_disable(hhc_clk);
clk_disable(dc_clk);
#endif
}
create_proc_file();
device_add(&udc->gadget.dev);
return 0;
status = device_add(&udc->gadget.dev);
if (!status)
return status;
/* If fail, fall through */
#ifdef USE_ISO
cleanup3:
free_irq(pdev->resource[2].start, udc);
......@@ -2860,8 +2983,17 @@ static int __init omap_udc_probe(struct platform_device *pdev)
cleanup0:
if (xceiv)
put_device(xceiv->dev);
if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
clk_disable(hhc_clk);
clk_disable(dc_clk);
clk_put(hhc_clk);
clk_put(dc_clk);
}
release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1);
return status;
}
......@@ -2891,6 +3023,13 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
free_irq(pdev->resource[2].start, udc);
free_irq(pdev->resource[1].start, udc);
if (udc->dc_clk) {
if (udc->clk_requested)
omap_udc_enable_clock(0);
clk_put(udc->hhc_clk);
clk_put(udc->dc_clk);
}
release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1);
......
......@@ -175,6 +175,9 @@ struct omap_udc {
unsigned ep0_reset_config:1;
unsigned ep0_setup:1;
struct completion *done;
struct clk *dc_clk;
struct clk *hhc_clk;
unsigned clk_requested:1;
};
/*-------------------------------------------------------------------------*/
......
......@@ -209,24 +209,16 @@ static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
{
static struct dmi_system_id broken_wakeup_table[] = {
{
.ident = "Asus A7V8X",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK"),
DMI_MATCH(DMI_BOARD_NAME, "A7V8X"),
DMI_MATCH(DMI_BOARD_VERSION, "REV 1.xx"),
}
},
{ }
};
int port;
char *sys_info;
static char bad_Asus_board[] = "A7V8X";
/* One of Asus's motherboards has a bug which causes it to
* wake up immediately from suspend-to-RAM if any of the ports
* are connected. In such cases we will not set EGSM.
*/
if (dmi_check_system(broken_wakeup_table)) {
sys_info = dmi_get_system_info(DMI_BOARD_NAME);
if (sys_info && !strcmp(sys_info, bad_Asus_board)) {
for (port = 0; port < uhci->rh_numports; ++port) {
if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
USBPORTSC_CCS)
......@@ -265,7 +257,9 @@ __acquires(uhci->lock)
int_enable = USBINTR_RESUME;
if (remote_wakeup_is_broken(uhci))
egsm_enable = 0;
if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable)
if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
!device_may_wakeup(
&uhci_to_hcd(uhci)->self.root_hub->dev))
uhci->working_RD = int_enable = 0;
outw(int_enable, uhci->io_addr + USBINTR);
......
......@@ -403,7 +403,7 @@ sisusbcon_putc(struct vc_data *c, int ch, int y, int x)
sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
(u32)SISUSB_HADDR(x, y), 2, &written);
(long)SISUSB_HADDR(x, y), 2, &written);
mutex_unlock(&sisusb->lock);
}
......@@ -438,7 +438,7 @@ sisusbcon_putcs(struct vc_data *c, const unsigned short *s,
}
sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
(u32)SISUSB_HADDR(x, y), count * 2, &written);
(long)SISUSB_HADDR(x, y), count * 2, &written);
mutex_unlock(&sisusb->lock);
}
......@@ -492,7 +492,7 @@ sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width)
sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(x, y),
(u32)SISUSB_HADDR(x, y), length, &written);
(long)SISUSB_HADDR(x, y), length, &written);
mutex_unlock(&sisusb->lock);
}
......@@ -564,7 +564,7 @@ sisusbcon_bmove(struct vc_data *c, int sy, int sx,
sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(dx, dy),
(u32)SISUSB_HADDR(dx, dy), length, &written);
(long)SISUSB_HADDR(dx, dy), length, &written);
mutex_unlock(&sisusb->lock);
}
......@@ -612,7 +612,7 @@ sisusbcon_switch(struct vc_data *c)
length);
sisusb_copy_memory(sisusb, (unsigned char *)c->vc_origin,
(u32)SISUSB_HADDR(0, 0),
(long)SISUSB_HADDR(0, 0),
length, &written);
mutex_unlock(&sisusb->lock);
......@@ -939,7 +939,7 @@ sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb,
}
sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(0, t),
(u32)SISUSB_HADDR(0, t), length, &written);
(long)SISUSB_HADDR(0, t), length, &written);
mutex_unlock(&sisusb->lock);
......
......@@ -920,7 +920,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
goto out2;
if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
0x0000, 0, 0, buf)) < 0) {
1, 0, 0, buf)) < 0) {
dbg("Select PHY #1 failed: %d", ret);
goto out2;
}
......
......@@ -170,7 +170,7 @@ config USB_SERIAL_FTDI_SIO
config USB_SERIAL_FUNSOFT
tristate "USB Fundamental Software Dongle Driver"
depends on USB_SERIAL
depends on USB_SERIAL && !(SPARC || SPARC64)
---help---
Say Y here if you want to use the Fundamental Software dongle.
......
......@@ -625,6 +625,9 @@ static int option_send_setup(struct usb_serial_port *port)
dbg("%s", __FUNCTION__);
if (port->number != 0)
return 0;
portdata = usb_get_serial_port_data(port);
if (port->tty) {
......
......@@ -728,7 +728,7 @@ UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
"Apple",
"iPod",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
"Apple",
......@@ -1358,6 +1358,21 @@ UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Francesco Foresti <frafore@tiscali.it> */
UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201,
"Super Top",
"IDE DEVICE",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* Reported by Robert Schedel <r.schedel@yahoo.de>
* Note: this is a 'super top' device like the above 14cd/6600 device */
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
"Teac",
"HD-35PUK-B",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment