Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: asix: Fix AX88772 device PHY selection
  USB: usblp.c - add Kyocera Mita FS 820 to list of "quirky" printers
  sisusb_con warning fixes
  USB: Fixed bug in endpoint release function.
  USB: small update to Documentation/usb/acm.txt
  USB storage: fix ipod ejecting issue
  USB Storage: unusual_devs: add supertop drives
  USB: omap_udc build fixes (sync with linux-omap)
  USB: funsoft is borken on sparc
  USB: fix interaction between different interfaces in an "Option" usb device
  UHCI: support device_may_wakeup
  UHCI: make test for ASUS motherboard more specific

Documentation/usb/acm.txt

@@ -46,6 +46,10 @@ Abstract Control Model (USB CDC ACM) specification.
 
 	3Com USR ISDN Pro TA
 
+  Some cell phones also connect via USB. I know the following phones work:
+
+	SonyEricsson K800i
+
   Unfortunately many modems and most ISDN TAs use proprietary interfaces and
 thus won't work with this drivers. Check for ACM compliance before buying.
 

drivers/usb/class/usblp.c

@@ -217,6 +217,7 @@ static const struct quirk_printer_struct quirk_printers[] = {
 	{ 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
 	{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
 	{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
+	{ 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
 	{ 0, 0 }
 };
 

drivers/usb/core/endpoint.c

@@ -268,6 +268,7 @@ static void ep_device_release(struct device *dev)
 	struct ep_device *ep_dev = to_ep_device(dev);
 
 	dev_dbg(dev, "%s called for %s\n", __FUNCTION__, dev->bus_id);
+	endpoint_free_minor(ep_dev);
 	kfree(ep_dev);
 }
 
@@ -349,7 +350,6 @@ void usb_remove_ep_files(struct usb_host_endpoint *endpoint)
 		sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
 		sysfs_remove_link(&ep_dev->dev.parent->kobj, name);
 		sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
-		endpoint_free_minor(ep_dev);
 		device_unregister(&ep_dev->dev);
 		endpoint->ep_dev = NULL;
 		destroy_endpoint_class();

drivers/usb/gadget/omap_udc.c

@@ -42,6 +42,7 @@
 #include <linux/usb_gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -60,6 +61,11 @@
 /* bulk DMA seems to be behaving for both IN and OUT */
 #define	USE_DMA
 
+/* FIXME: OMAP2 currently has some problem in DMA mode */
+#ifdef CONFIG_ARCH_OMAP2
+#undef USE_DMA
+#endif
+
 /* ISO too */
 #define	USE_ISO
 
@@ -99,7 +105,7 @@ static unsigned fifo_mode = 0;
  * boot parameter "omap_udc:fifo_mode=42"
  */
 module_param (fifo_mode, uint, 0);
-MODULE_PARM_DESC (fifo_mode, "endpoint setup (0 == default)");
+MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
 
 #ifdef	USE_DMA
 static unsigned use_dma = 1;
@@ -542,9 +548,9 @@ static inline dma_addr_t dma_csac(unsigned lch)
 	/* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
 	 * read before the DMA controller finished disabling the channel.
 	 */
-	csac = omap_readw(OMAP_DMA_CSAC(lch));
+	csac = OMAP_DMA_CSAC_REG(lch);
 	if (csac == 0)
-		csac = omap_readw(OMAP_DMA_CSAC(lch));
+		csac = OMAP_DMA_CSAC_REG(lch);
 	return csac;
 }
 
@@ -555,9 +561,9 @@ static inline dma_addr_t dma_cdac(unsigned lch)
 	/* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
 	 * read before the DMA controller finished disabling the channel.
 	 */
-	cdac = omap_readw(OMAP_DMA_CDAC(lch));
+	cdac = OMAP_DMA_CDAC_REG(lch);
 	if (cdac == 0)
-		cdac = omap_readw(OMAP_DMA_CDAC(lch));
+		cdac = OMAP_DMA_CDAC_REG(lch);
 	return cdac;
 }
 
@@ -582,7 +588,7 @@ static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
 }
 
 #define DMA_DEST_LAST(x) (cpu_is_omap15xx() \
-		? omap_readw(OMAP_DMA_CSAC(x)) /* really: CPC */ \
+		? OMAP_DMA_CSAC_REG(x) /* really: CPC */ \
 		: dma_cdac(x))
 
 static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
@@ -620,17 +626,19 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
 			|| (cpu_is_omap15xx() && length < ep->maxpacket)) {
 		txdma_ctrl = UDC_TXN_EOT | length;
 		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
-				length, 1, sync_mode);
+				length, 1, sync_mode, 0, 0);
 	} else {
 		length = min(length / ep->maxpacket,
 				(unsigned) UDC_TXN_TSC + 1);
 		txdma_ctrl = length;
 		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
-				ep->ep.maxpacket >> 1, length, sync_mode);
+				ep->ep.maxpacket >> 1, length, sync_mode,
+				0, 0);
 		length *= ep->maxpacket;
 	}
 	omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF,
-		OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
+		OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
+		0, 0);
 
 	omap_start_dma(ep->lch);
 	ep->dma_counter = dma_csac(ep->lch);
@@ -675,9 +683,11 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
 	req->dma_bytes = packets * ep->ep.maxpacket;
 	omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
 			ep->ep.maxpacket >> 1, packets,
-			OMAP_DMA_SYNC_ELEMENT);
+			OMAP_DMA_SYNC_ELEMENT,
+			0, 0);
 	omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
-		OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
+		OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
+		0, 0);
 	ep->dma_counter = DMA_DEST_LAST(ep->lch);
 
 	UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1);
@@ -820,7 +830,8 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 			omap_set_dma_dest_params(ep->lch,
 				OMAP_DMA_PORT_TIPB,
 				OMAP_DMA_AMODE_CONSTANT,
-				(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG));
+				(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
+				0, 0);
 		}
 	} else {
 		status = omap_request_dma(OMAP_DMA_USB_W2FC_RX0 - 1 + channel,
@@ -831,7 +842,8 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 			omap_set_dma_src_params(ep->lch,
 				OMAP_DMA_PORT_TIPB,
 				OMAP_DMA_AMODE_CONSTANT,
-				(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG));
+				(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
+				0, 0);
 			/* EMIFF */
 			omap_set_dma_dest_burst_mode(ep->lch,
 						OMAP_DMA_DATA_BURST_4);
@@ -846,7 +858,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 
 		/* channel type P: hw synch (fifo) */
 		if (!cpu_is_omap15xx())
-			omap_writew(2, OMAP_DMA_LCH_CTRL(ep->lch));
+			OMAP1_DMA_LCH_CTRL_REG(ep->lch) = 2;
 	}
 
 just_restart:
@@ -893,7 +905,7 @@ static void dma_channel_release(struct omap_ep *ep)
 	else
 		req = NULL;
 
-	active = ((1 << 7) & omap_readl(OMAP_DMA_CCR(ep->lch))) != 0;
+	active = ((1 << 7) & OMAP_DMA_CCR_REG(ep->lch)) != 0;
 
 	DBG("%s release %s %cxdma%d %p\n", ep->ep.name,
 			active ? "active" : "idle",
@@ -1298,6 +1310,23 @@ static void pullup_disable(struct omap_udc *udc)
 	UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
 }
 
+static struct omap_udc *udc;
+
+static void omap_udc_enable_clock(int enable)
+{
+	if (udc == NULL || udc->dc_clk == NULL || udc->hhc_clk == NULL)
+		return;
+
+	if (enable) {
+		clk_enable(udc->dc_clk);
+		clk_enable(udc->hhc_clk);
+		udelay(100);
+	} else {
+		clk_disable(udc->hhc_clk);
+		clk_disable(udc->dc_clk);
+	}
+}
+
 /*
  * Called by whatever detects VBUS sessions:  external transceiver
  * driver, or maybe GPIO0 VBUS IRQ.  May request 48 MHz clock.
@@ -1318,10 +1347,22 @@ static int omap_vbus_session(struct usb_gadget *gadget, int is_active)
 		else
 			FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510;
 	}
+	if (udc->dc_clk != NULL && is_active) {
+		if (!udc->clk_requested) {
+			omap_udc_enable_clock(1);
+			udc->clk_requested = 1;
+		}
+	}
 	if (can_pullup(udc))
 		pullup_enable(udc);
 	else
 		pullup_disable(udc);
+	if (udc->dc_clk != NULL && !is_active) {
+		if (udc->clk_requested) {
+			omap_udc_enable_clock(0);
+			udc->clk_requested = 0;
+		}
+	}
 	spin_unlock_irqrestore(&udc->lock, flags);
 	return 0;
 }
@@ -1866,7 +1907,7 @@ static void pio_out_timer(unsigned long _ep)
 
 	spin_lock_irqsave(&ep->udc->lock, flags);
 	if (!list_empty(&ep->queue) && ep->ackwait) {
-		use_ep(ep, 0);
+		use_ep(ep, UDC_EP_SEL);
 		stat_flg = UDC_STAT_FLG_REG;
 
 		if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN)
@@ -1876,12 +1917,12 @@ static void pio_out_timer(unsigned long _ep)
 			VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg);
 			req = container_of(ep->queue.next,
 					struct omap_req, queue);
-			UDC_EP_NUM_REG = ep->bEndpointAddress | UDC_EP_SEL;
 			(void) read_fifo(ep, req);
 			UDC_EP_NUM_REG = ep->bEndpointAddress;
 			UDC_CTRL_REG = UDC_SET_FIFO_EN;
 			ep->ackwait = 1 + ep->double_buf;
-		}
+		} else
+			deselect_ep();
 	}
 	mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
 	spin_unlock_irqrestore(&ep->udc->lock, flags);
@@ -2028,7 +2069,17 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
 
 /*-------------------------------------------------------------------------*/
 
-static struct omap_udc *udc;
+static inline int machine_needs_vbus_session(void)
+{
+	return (machine_is_omap_innovator()
+		|| machine_is_omap_osk()
+		|| machine_is_omap_apollon()
+#ifndef CONFIG_MACH_OMAP_H4_OTG
+		|| machine_is_omap_h4()
+#endif
+		|| machine_is_sx1()
+		);
+}
 
 int usb_gadget_register_driver (struct usb_gadget_driver *driver)
 {
@@ -2070,6 +2121,9 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
 	udc->gadget.dev.driver = &driver->driver;
 	spin_unlock_irqrestore(&udc->lock, flags);
 
+	if (udc->dc_clk != NULL)
+		omap_udc_enable_clock(1);
+
 	status = driver->bind (&udc->gadget);
 	if (status) {
 		DBG("bind to %s --> %d\n", driver->driver.name, status);
@@ -2103,10 +2157,12 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
 	/* boards that don't have VBUS sensing can't autogate 48MHz;
 	 * can't enter deep sleep while a gadget driver is active.
 	 */
-	if (machine_is_omap_innovator() || machine_is_omap_osk())
+	if (machine_needs_vbus_session())
 		omap_vbus_session(&udc->gadget, 1);
 
 done:
+	if (udc->dc_clk != NULL)
+		omap_udc_enable_clock(0);
 	return status;
 }
 EXPORT_SYMBOL(usb_gadget_register_driver);
@@ -2121,7 +2177,10 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 	if (!driver || driver != udc->driver || !driver->unbind)
 		return -EINVAL;
 
-	if (machine_is_omap_innovator() || machine_is_omap_osk())
+	if (udc->dc_clk != NULL)
+		omap_udc_enable_clock(1);
+
+	if (machine_needs_vbus_session())
 		omap_vbus_session(&udc->gadget, 0);
 
 	if (udc->transceiver)
@@ -2137,6 +2196,8 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
+	if (udc->dc_clk != NULL)
+		omap_udc_enable_clock(0);
 	DBG("unregistered driver '%s'\n", driver->driver.name);
 	return status;
 }
@@ -2228,11 +2289,18 @@ static int proc_otg_show(struct seq_file *s)
 {
 	u32		tmp;
 	u32		trans;
+	char		*ctrl_name;
 
 	tmp = OTG_REV_REG;
+	if (cpu_is_omap24xx()) {
+		ctrl_name = "control_devconf";
+		trans = CONTROL_DEVCONF_REG;
+	} else {
+		ctrl_name = "tranceiver_ctrl";
 		trans = USB_TRANSCEIVER_CTRL_REG;
-	seq_printf(s, "\nOTG rev %d.%d, transceiver_ctrl %05x\n",
-		tmp >> 4, tmp & 0xf, trans);
+	}
+	seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
+		tmp >> 4, tmp & 0xf, ctrl_name, trans);
 	tmp = OTG_SYSCON_1_REG;
 	seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
 			FOURBITS "\n", tmp,
@@ -2315,11 +2383,16 @@ static int proc_udc_show(struct seq_file *s, void *_)
 		fifo_mode,
 		udc->driver ? udc->driver->driver.name : "(none)",
 		HMC,
-		udc->transceiver ? udc->transceiver->label : "(none)");
+		udc->transceiver
+			? udc->transceiver->label
+			: ((cpu_is_omap1710() || cpu_is_omap24xx())
+				? "external" : "(none)"));
+	if (cpu_class_is_omap1()) {
 		seq_printf(s, "ULPD control %04x req %04x status %04x\n",
 			__REG16(ULPD_CLOCK_CTRL),
 			__REG16(ULPD_SOFT_REQ),
 			__REG16(ULPD_STATUS_REQ));
+	}
 
 	/* OTG controller registers */
 	if (!cpu_is_omap15xx())
@@ -2504,9 +2577,10 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 		dbuf = 1;
 	} else {
 		/* double-buffering "not supported" on 15xx,
-		 * and ignored for PIO-IN on 16xx
+		 * and ignored for PIO-IN on newer chips
+		 * (for more reliable behavior)
 		 */
-		if (!use_dma || cpu_is_omap15xx())
+		if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx())
 			dbuf = 0;
 
 		switch (maxp) {
@@ -2709,6 +2783,8 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 	struct otg_transceiver	*xceiv = NULL;
 	const char		*type = NULL;
 	struct omap_usb_config	*config = pdev->dev.platform_data;
+	struct clk		*dc_clk;
+	struct clk		*hhc_clk;
 
 	/* NOTE:  "knows" the order of the resources! */
 	if (!request_mem_region(pdev->resource[0].start,
@@ -2718,6 +2794,26 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
+	if (cpu_is_omap16xx()) {
+		dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
+		hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck");
+		BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
+		/* can't use omap_udc_enable_clock yet */
+		clk_enable(dc_clk);
+		clk_enable(hhc_clk);
+		udelay(100);
+	}
+
+	if (cpu_is_omap24xx()) {
+		dc_clk = clk_get(&pdev->dev, "usb_fck");
+		hhc_clk = clk_get(&pdev->dev, "usb_l4_ick");
+		BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
+		/* can't use omap_udc_enable_clock yet */
+		clk_enable(dc_clk);
+		clk_enable(hhc_clk);
+		udelay(100);
+	}
+
 	INFO("OMAP UDC rev %d.%d%s\n",
 		UDC_REV_REG >> 4, UDC_REV_REG & 0xf,
 		config->otg ? ", Mini-AB" : "");
@@ -2727,7 +2823,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		hmc = HMC_1510;
 		type = "(unknown)";
 
-		if (machine_is_omap_innovator()) {
+		if (machine_is_omap_innovator() || machine_is_sx1()) {
 			/* just set up software VBUS detect, and then
 			 * later rig it so we always report VBUS.
 			 * FIXME without really sensing VBUS, we can't
@@ -2756,6 +2852,15 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		}
 
 		hmc = HMC_1610;
+
+		if (cpu_is_omap24xx()) {
+			/* this could be transceiverless in one of the
+			 * "we don't need to know" modes.
+			 */
+			type = "external";
+			goto known;
+		}
+
 		switch (hmc) {
 		case 0:			/* POWERUP DEFAULT == 0 */
 		case 4:
@@ -2794,6 +2899,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 			goto cleanup0;
 		}
 	}
+known:
 	INFO("hmc mode %d, %s transceiver\n", hmc, type);
 
 	/* a "gadget" abstracts/virtualizes the controller */
@@ -2818,8 +2924,8 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 	status = request_irq(pdev->resource[1].start, omap_udc_irq,
 			IRQF_SAMPLE_RANDOM, driver_name, udc);
 	if (status != 0) {
-		ERR( "can't get irq %ld, err %d\n",
-			pdev->resource[1].start, status);
+		ERR("can't get irq %d, err %d\n",
+			(int) pdev->resource[1].start, status);
 		goto cleanup1;
 	}
 
@@ -2827,24 +2933,41 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 	status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
 			IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
 	if (status != 0) {
-		ERR( "can't get irq %ld, err %d\n",
-			pdev->resource[2].start, status);
+		ERR("can't get irq %d, err %d\n",
+			(int) pdev->resource[2].start, status);
 		goto cleanup2;
 	}
 #ifdef	USE_ISO
 	status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
 			IRQF_DISABLED, "omap_udc iso", udc);
 	if (status != 0) {
-		ERR("can't get irq %ld, err %d\n",
-			pdev->resource[3].start, status);
+		ERR("can't get irq %d, err %d\n",
+			(int) pdev->resource[3].start, status);
 		goto cleanup3;
 	}
 #endif
+	if (cpu_is_omap16xx()) {
+		udc->dc_clk = dc_clk;
+		udc->hhc_clk = hhc_clk;
+		clk_disable(hhc_clk);
+		clk_disable(dc_clk);
+	}
+
+	if (cpu_is_omap24xx()) {
+		udc->dc_clk = dc_clk;
+		udc->hhc_clk = hhc_clk;
+		/* FIXME OMAP2 don't release hhc & dc clock */
+#if 0
+		clk_disable(hhc_clk);
+		clk_disable(dc_clk);
+#endif
+	}
 
 	create_proc_file();
-	device_add(&udc->gadget.dev);
-	return 0;
-
+	status = device_add(&udc->gadget.dev);
+	if (!status)
+		return status;
+	/* If fail, fall through */
 #ifdef	USE_ISO
 cleanup3:
 	free_irq(pdev->resource[2].start, udc);
@@ -2860,8 +2983,17 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 cleanup0:
 	if (xceiv)
 		put_device(xceiv->dev);
+
+	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+		clk_disable(hhc_clk);
+		clk_disable(dc_clk);
+		clk_put(hhc_clk);
+		clk_put(dc_clk);
+	}
+
 	release_mem_region(pdev->resource[0].start,
 			pdev->resource[0].end - pdev->resource[0].start + 1);
+
 	return status;
 }
 
@@ -2891,6 +3023,13 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
 	free_irq(pdev->resource[2].start, udc);
 	free_irq(pdev->resource[1].start, udc);
 
+	if (udc->dc_clk) {
+		if (udc->clk_requested)
+			omap_udc_enable_clock(0);
+		clk_put(udc->hhc_clk);
+		clk_put(udc->dc_clk);
+	}
+
 	release_mem_region(pdev->resource[0].start,
 			pdev->resource[0].end - pdev->resource[0].start + 1);
 

drivers/usb/gadget/omap_udc.h

@@ -175,6 +175,9 @@ struct omap_udc {
 	unsigned			ep0_reset_config:1;
 	unsigned			ep0_setup:1;
 	struct completion		*done;
+	struct clk			*dc_clk;
+	struct clk			*hhc_clk;
+	unsigned			clk_requested:1;
 };
 
 /*-------------------------------------------------------------------------*/

drivers/usb/host/uhci-hcd.c

@@ -209,24 +209,16 @@ static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
 
 static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
 {
-	static struct dmi_system_id broken_wakeup_table[] = {
-		{
-			.ident = "Asus A7V8X",
-			.matches = {
-				DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK"),
-				DMI_MATCH(DMI_BOARD_NAME, "A7V8X"),
-				DMI_MATCH(DMI_BOARD_VERSION, "REV 1.xx"),
-			}
-		},
-		{ }
-	};
 	int port;
+	char *sys_info;
+	static char bad_Asus_board[] = "A7V8X";
 
 	/* One of Asus's motherboards has a bug which causes it to
 	 * wake up immediately from suspend-to-RAM if any of the ports
 	 * are connected.  In such cases we will not set EGSM.
 	 */
-	if (dmi_check_system(broken_wakeup_table)) {
+	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+	if (sys_info && !strcmp(sys_info, bad_Asus_board)) {
 		for (port = 0; port < uhci->rh_numports; ++port) {
 			if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
 					USBPORTSC_CCS)
@@ -265,7 +257,9 @@ __acquires(uhci->lock)
 	int_enable = USBINTR_RESUME;
 	if (remote_wakeup_is_broken(uhci))
 		egsm_enable = 0;
-	if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable)
+	if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
+			!device_may_wakeup(
+				&uhci_to_hcd(uhci)->self.root_hub->dev))
 		uhci->working_RD = int_enable = 0;
 
 	outw(int_enable, uhci->io_addr + USBINTR);

drivers/usb/misc/sisusbvga/sisusb_con.c

@@ -403,7 +403,7 @@ sisusbcon_putc(struct vc_data *c, int ch, int y, int x)
 
 
 	sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
-				(u32)SISUSB_HADDR(x, y), 2, &written);
+				(long)SISUSB_HADDR(x, y), 2, &written);
 
 	mutex_unlock(&sisusb->lock);
 }
@@ -438,7 +438,7 @@ sisusbcon_putcs(struct vc_data *c, const unsigned short *s,
 	}
 
 	sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y),
-				(u32)SISUSB_HADDR(x, y), count * 2, &written);
+				(long)SISUSB_HADDR(x, y), count * 2, &written);
 
 	mutex_unlock(&sisusb->lock);
 }
@@ -492,7 +492,7 @@ sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width)
 
 
 	sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(x, y),
-				(u32)SISUSB_HADDR(x, y), length, &written);
+				(long)SISUSB_HADDR(x, y), length, &written);
 
 	mutex_unlock(&sisusb->lock);
 }
@@ -564,7 +564,7 @@ sisusbcon_bmove(struct vc_data *c, int sy, int sx,
 
 
 	sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(dx, dy),
-				(u32)SISUSB_HADDR(dx, dy), length, &written);
+				(long)SISUSB_HADDR(dx, dy), length, &written);
 
 	mutex_unlock(&sisusb->lock);
 }
@@ -612,7 +612,7 @@ sisusbcon_switch(struct vc_data *c)
 								length);
 
 	sisusb_copy_memory(sisusb, (unsigned char *)c->vc_origin,
-				(u32)SISUSB_HADDR(0, 0),
+				(long)SISUSB_HADDR(0, 0),
 				length, &written);
 
 	mutex_unlock(&sisusb->lock);
@@ -939,7 +939,7 @@ sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb,
 	}
 
 	sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(0, t),
-				(u32)SISUSB_HADDR(0, t), length, &written);
+				(long)SISUSB_HADDR(0, t), length, &written);
 
 	mutex_unlock(&sisusb->lock);
 

drivers/usb/net/asix.c

@@ -920,7 +920,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 		goto out2;
 
 	if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
-				0x0000, 0, 0, buf)) < 0) {
+				1, 0, 0, buf)) < 0) {
 		dbg("Select PHY #1 failed: %d", ret);
 		goto out2;
 	}

drivers/usb/serial/Kconfig

@@ -170,7 +170,7 @@ config USB_SERIAL_FTDI_SIO
 
 config USB_SERIAL_FUNSOFT
 	tristate "USB Fundamental Software Dongle Driver"
-	depends on USB_SERIAL
+	depends on USB_SERIAL && !(SPARC || SPARC64)
 	---help---
 	  Say Y here if you want to use the Fundamental Software dongle.
 

drivers/usb/serial/option.c

@@ -625,6 +625,9 @@ static int option_send_setup(struct usb_serial_port *port)
 
 	dbg("%s", __FUNCTION__);
 
+	if (port->number != 0)
+		return 0;
+
 	portdata = usb_get_serial_port_data(port);
 
 	if (port->tty) {

drivers/usb/storage/unusual_devs.h

@@ -728,7 +728,7 @@ UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
 		"Apple",
 		"iPod",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY ),
+		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 
 UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
 		"Apple",
@@ -1358,6 +1358,21 @@ UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Francesco Foresti <frafore@tiscali.it> */
+UNUSUAL_DEV(  0x14cd, 0x6600, 0x0201, 0x0201,
+		"Super Top",
+		"IDE DEVICE",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Robert Schedel <r.schedel@yahoo.de>
+ * Note: this is a 'super top' device like the above 14cd/6600 device */
+UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
+		"Teac",
+		"HD-35PUK-B",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
  * and Renato Perini <rperini@email.it>
  */