Skip to content

L
linux
Commit f906fb1d authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'next/board' of git://git.linaro.org/people/arnd/arm-soc 

* 'next/board' of git://git.linaro.org/people/arnd/arm-soc: (34 commits)
  ep93xx: add support Vision EP9307 SoM
  ARM: mxs: Add initial support for DENX MX28
  ARM: EXYNOS4: Add support SMDK4412 Board
  ARM: EXYNOS4: Add MCT support for EXYNOS4412
  ARM: EXYNOS4: Add functions for gic interrupt handling
  ARM: EXYNOS4: Add support clock for EXYNOS4412
  ARM: EXYNOS4: Add support new EXYNOS4412 SoC
  ARM: EXYNOS4: Add support MCT PPI for EXYNOS4212
  ARM: EXYNOS4: Add support PPI in external GIC
  ARM: EXYNOS4: convert boot_params to atag_offset
  ixp4xx: support omicron ixp425 based boards
  ARM: EXYNOS4: Add support SMDK4212 Board
  ARM: EXYNOS4: Add support PM for EXYNOS4212
  ARM: EXYNOS4: Add support clock for EXYNOS4212
  ARM: EXYNOS4: Add support new EXYNOS4212 SoC
  at91: USB-A9G20 C01 & C11 board support
  at91: merge board USB-A9260 and USB-A9263 together
  at91: add support for RSIs EWS board
  ARM: SAMSUNG: Fix mask value for S5P64X0 CPU IDs
  ARM: SAMSUNG: Fix mask for S3C64xx CPU IDs
  ...
parents 510597e2 a7fadac1
Hide whitespace changes
Inline Side-by-side
Showing with 3147 additions and 586 deletions
arch/arm/configs/exynos4_defconfig
View file @ f906fb1d
......@@ -11,6 +11,7 @@ CONFIG_MACH_SMDKV310=y
CONFIG_MACH_ARMLEX4210=y
CONFIG_MACH_UNIVERSAL_C210=y
CONFIG_MACH_NURI=y
CONFIG_MACH_ORIGEN=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
......
arch/arm/configs/mxs_defconfig
View file @ f906fb1d
......@@ -26,6 +26,7 @@ CONFIG_MACH_MX23EVK=y
CONFIG_MACH_MX28EVK=y
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
CONFIG_MACH_M28EVK=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
......
arch/arm/mach-at91/Kconfig
View file @ f906fb1d
......@@ -182,6 +182,11 @@ config MACH_ECO920
help
Select this if you are using the eco920 board
config MACH_RSI_EWS
bool "RSI Embedded Webserver"
depends on ARCH_AT91RM9200
help
Select this if you are using RSIs EWS board.
endif
# ----------------------------------------------------------
......@@ -381,6 +386,14 @@ config MACH_GSIA18S
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
config MACH_USB_A9G20
bool "CALAO USB-A9G20"
depends on ARCH_AT91SAM9G20
help
Select this if you are using a Calao Systems USB-A9G20.
<http://www.calao-systems.com>
endif
if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
......
arch/arm/mach-at91/Makefile
View file @ f906fb1d
......@@ -36,12 +36,13 @@ obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
obj-$(CONFIG_MACH_ECO920) += board-eco920.o
obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
......@@ -53,7 +54,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o
obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o
obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o
# AT91SAM9RL board-specific support
......@@ -67,6 +68,7 @@ obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
......
arch/arm/mach-at91/board-rsi-ews.c 0 → 100644
View file @ f906fb1d
/*
* board-rsi-ews.c
*
* Copyright (C)
* 2005 SAN People,
* 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
*
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <linux/gpio.h>
#include "generic.h"
static void __init rsi_ews_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
/* DBGU on ttyS0. (Rx & Tx only) */
/* This one is for debugging */
at91_register_uart(0, 0, 0);
/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
/* Dialin/-out modem interface */
at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART3 on ttyS4. (Rx, Tx, RTS) */
/* RS485 communication */
at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
/*
* Ethernet
*/
static struct at91_eth_data rsi_ews_eth_data __initdata = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
/*
* USB Host
*/
static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
.ports = 1,
};
/*
* SD/MC
*/
static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
.slot_b = 0,
.wire4 = 1,
.det_pin = AT91_PIN_PB27,
.wp_pin = AT91_PIN_PB29,
};
/*
* I2C
*/
static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
{
I2C_BOARD_INFO("ds1337", 0x68),
},
{
I2C_BOARD_INFO("24c01", 0x50),
}
};
/*
* LEDs
*/
static struct gpio_led rsi_ews_leds[] = {
{
.name = "led0",
.gpio = AT91_PIN_PB6,
.active_low = 0,
},
{
.name = "led1",
.gpio = AT91_PIN_PB7,
.active_low = 0,
},
{
.name = "led2",
.gpio = AT91_PIN_PB8,
.active_low = 0,
},
{
.name = "led3",
.gpio = AT91_PIN_PB9,
.active_low = 0,
},
};
/*
* DataFlash
*/
static struct spi_board_info rsi_ews_spi_devices[] = {
{ /* DataFlash chip 1*/
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 5 * 1000 * 1000,
},
{ /* DataFlash chip 2*/
.modalias = "mtd_dataflash",
.chip_select = 1,
.max_speed_hz = 5 * 1000 * 1000,
},
};
/*
* NOR flash
*/
static struct mtd_partition rsiews_nor_partitions[] = {
{
.name = "boot",
.offset = 0,
.size = 3 * SZ_128K,
.mask_flags = MTD_WRITEABLE
},
{
.name = "kernel",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_2M - (3 * SZ_128K)
},
{
.name = "root",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_8M
},
{
.name = "kernelupd",
.offset = MTDPART_OFS_NXTBLK,
.size = 3 * SZ_512K,
.mask_flags = MTD_WRITEABLE
},
{
.name = "rootupd",
.offset = MTDPART_OFS_NXTBLK,
.size = 9 * SZ_512K,
.mask_flags = MTD_WRITEABLE
},
};
static struct physmap_flash_data rsiews_nor_data = {
.width = 2,
.parts = rsiews_nor_partitions,
.nr_parts = ARRAY_SIZE(rsiews_nor_partitions),
};
#define NOR_BASE AT91_CHIPSELECT_0
#define NOR_SIZE SZ_16M
static struct resource nor_flash_resources[] = {
{
.start = NOR_BASE,
.end = NOR_BASE + NOR_SIZE - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device rsiews_nor_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &rsiews_nor_data,
},
.resource = nor_flash_resources,
.num_resources = ARRAY_SIZE(nor_flash_resources),
};
/*
* Init Func
*/
static void __init rsi_ews_board_init(void)
{
/* Serial */
at91_add_device_serial();
at91_set_gpio_output(AT91_PIN_PA21, 0);
/* Ethernet */
at91_add_device_eth(&rsi_ews_eth_data);
/* USB Host */
at91_add_device_usbh(&rsi_ews_usbh_data);
/* I2C */
at91_add_device_i2c(rsi_ews_i2c_devices,
ARRAY_SIZE(rsi_ews_i2c_devices));
/* SPI */
at91_add_device_spi(rsi_ews_spi_devices,
ARRAY_SIZE(rsi_ews_spi_devices));
/* MMC */
at91_add_device_mmc(0, &rsi_ews_mmc_data);
/* NOR Flash */
platform_device_register(&rsiews_nor_flash);
/* LEDs */
at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
}
MACHINE_START(RSI_EWS, "RSI EWS")
/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = rsi_ews_init_early,
.init_irq = at91_init_irq_default,
.init_machine = rsi_ews_board_init,
MACHINE_END
arch/arm/mach-at91/board-usb-a9260.c deleted 100644 → 0
View file @ 510597e2
/*
* linux/arch/arm/mach-at91/board-usb-a9260.c
*
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
* Copyright (C) 2007 Calao-systems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/clk.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include "sam9_smc.h"
#include "generic.h"
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
/*
* USB Host port
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
};
/*
* USB Device port
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
.pullup_pin = 0, /* pull-up driven by UDC */
};
/*
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA31,
.is_rmii = 1,
};
/*
* NAND flash
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Uboot & Kernel",
.offset = 0,
.size = SZ_16M,
},
{
.name = "Root FS",
.offset = MTDPART_OFS_NXTBLK,
.size = 120 * SZ_1M,
},
{
.name = "FS",
.offset = MTDPART_OFS_NXTBLK,
.size = 120 * SZ_1M,
}
};
static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
{
*num_partitions = ARRAY_SIZE(ek_nand_partition);
return ek_nand_partition;
}
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 1,
.ncs_write_setup = 0,
.nwe_setup = 1,
.ncs_read_pulse = 3,
.nrd_pulse = 3,
.ncs_write_pulse = 3,
.nwe_pulse = 3,
.read_cycle = 5,
.write_cycle = 5,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
.tdf_cycles = 2,
};
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button ek_buttons[] = {
{ /* USER PUSH BUTTON */
.code = KEY_ENTER,
.gpio = AT91_PIN_PB10,
.active_low = 1,
.desc = "user_pb",
.wakeup = 1,
}
};
static struct gpio_keys_platform_data ek_button_data = {
.buttons = ek_buttons,
.nbuttons = ARRAY_SIZE(ek_buttons),
};
static struct platform_device ek_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &ek_button_data,
}
};
static void __init ek_add_device_buttons(void)
{
at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
at91_set_deglitch(AT91_PIN_PB10, 1);
platform_device_register(&ek_button_device);
}
#else
static void __init ek_add_device_buttons(void) {}
#endif
/*
* LEDs
*/
static struct gpio_led ek_leds[] = {
{ /* user_led (green) */
.name = "user_led",
.gpio = AT91_PIN_PB21,
.active_low = 0,
.default_trigger = "heartbeat",
}
};
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* shutdown controller, wakeup button (5 msec low) */
at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}
MACHINE_START(USB_A9260, "CALAO USB_A9260")
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
arch/arm/mach-at91/board-usb-a9263.c → arch/arm/mach-at91/board-usb-a926x.c
View file @ f906fb1d
/*
* linux/arch/arm/mach-at91/board-usb-a9263.c
* linux/arch/arm/mach-at91/board-usb-a926x.c
*
* Copyright (C) 2005 SAN People
* Copyright (C) 2007 Atmel Corporation.
* Copyright (C) 2007 Calao-systems
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -21,14 +22,15 @@
*/
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/spi/mmc_spi.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
......@@ -74,10 +76,42 @@ static struct at91_udc_data __initdata ek_udc_data = {
.pullup_pin = 0, /* pull-up driven by UDC */
};
static void __init ek_add_device_udc(void)
{
if (machine_is_usb_a9260() || machine_is_usb_a9g20())
ek_udc_data.vbus_pin = AT91_PIN_PC5;
at91_add_device_udc(&ek_udc_data);
}
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
static int at91_mmc_spi_init(struct device *dev,
irqreturn_t (*detect_int)(int, void *), void *data)
{
/* Configure Interrupt pin as input, no pull-up */
at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"mmc-spi-detect", data);
}
static void at91_mmc_spi_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
}
static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
.init = at91_mmc_spi_init,
.exit = at91_mmc_spi_exit,
.detect_delay = 100, /* msecs */
};
#endif
/*
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
static struct spi_board_info usb_a9263_spi_devices[] = {
#if !defined(CONFIG_MMC_AT91)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
......@@ -88,6 +122,27 @@ static struct spi_board_info ek_spi_devices[] = {
#endif
};
static struct spi_board_info usb_a9g20_spi_devices[] = {
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 1,
.chip_select = 0,
.platform_data = &at91_mmc_spi_pdata,
.mode = SPI_MODE_3,
},
#endif
};
static void __init ek_add_device_spi(void)
{
if (machine_is_usb_a9263())
at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
else if (machine_is_usb_a9g20())
at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
}
/*
* MACB Ethernet device
*/
......@@ -96,24 +151,42 @@ static struct at91_eth_data __initdata ek_macb_data = {
.is_rmii = 1,
};
static void __init ek_add_device_eth(void)
{
if (machine_is_usb_a9260() || machine_is_usb_a9g20())
ek_macb_data.phy_irq_pin = AT91_PIN_PA31;
at91_add_device_eth(&ek_macb_data);
}
/*
* NAND flash
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Linux Kernel",
.name = "barebox",
.offset = 0,
.size = SZ_16M,
},
{
.name = "Root FS",
.size = 3 * SZ_128K,
}, {
.name = "bareboxenv",
.offset = MTDPART_OFS_NXTBLK,
.size = 120 * SZ_1M,
},
{
.name = "FS",
.size = SZ_128K,
}, {
.name = "bareboxenv2",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_128K,
}, {
.name = "kernel",
.offset = MTDPART_OFS_NXTBLK,
.size = 4 * SZ_1M,
}, {
.name = "rootfs",
.offset = MTDPART_OFS_NXTBLK,
.size = 120 * SZ_1M,
}, {
.name = "data",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
}
};
......@@ -132,7 +205,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.partition_info = nand_partitions,
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 1,
.ncs_write_setup = 0,
......@@ -150,10 +223,36 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
.tdf_cycles = 2,
};
static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 2,
.ncs_write_setup = 0,
.nwe_setup = 2,
.ncs_read_pulse = 4,
.nrd_pulse = 4,
.ncs_write_pulse = 4,
.nwe_pulse = 4,
.read_cycle = 7,
.write_cycle = 7,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
.tdf_cycles = 3,
};
static void __init ek_add_device_nand(void)
{
if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
ek_nand_data.rdy_pin = AT91_PIN_PC13;
ek_nand_data.enable_pin = AT91_PIN_PC14;
}
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &ek_nand_smc_config);
if (machine_is_usb_a9g20())
sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
else
sam9_smc_configure(3, &usb_a9260_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
......@@ -210,6 +309,19 @@ static struct gpio_led ek_leds[] = {
}
};
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("rv3029c2", 0x56),
},
};
static void __init ek_add_device_leds(void)
{
if (machine_is_usb_a9260() || machine_is_usb_a9g20())
ek_leds[0].active_low = 0;
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
static void __init ek_board_init(void)
{
......@@ -218,22 +330,29 @@ static void __init ek_board_init(void)
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
ek_add_device_udc();
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
ek_add_device_spi();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
ek_add_device_eth();
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* shutdown controller, wakeup button (5 msec low) */
at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
ek_add_device_leds();
if (machine_is_usb_a9g20()) {
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
} else {
/* I2C */
at91_add_device_i2c(NULL, 0);
/* shutdown controller, wakeup button (5 msec low) */
at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
| AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}
}
MACHINE_START(USB_A9263, "CALAO USB_A9263")
......@@ -244,3 +363,21 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263")
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
MACHINE_START(USB_A9260, "CALAO USB_A9260")
/* Maintainer: calao-systems */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
arch/arm/mach-at91/include/mach/timex.h
View file @ f906fb1d
......@@ -64,7 +64,12 @@
#elif defined(CONFIG_ARCH_AT91SAM9G20)
#if defined(CONFIG_MACH_USB_A9G20)
#define AT91SAM9_MASTER_CLOCK 133000000
#else
#define AT91SAM9_MASTER_CLOCK 132096000
#endif
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9G45)
......
arch/arm/mach-ep93xx/Kconfig
View file @ f906fb1d
......@@ -182,6 +182,13 @@ config MACH_TS72XX
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
config MACH_VISION_EP9307
bool "Support Vision Engraving Systems EP9307 SoM"
depends on EP93XX_SDCE0_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Vision Engraving Systems EP9307 SoM.
choice
prompt "Select a UART for early kernel messages"
......
arch/arm/mach-ep93xx/Makefile
View file @ f906fb1d
......@@ -15,3 +15,4 @@ obj-$(CONFIG_MACH_MICRO9) += micro9.o
obj-$(CONFIG_MACH_SIM_ONE) += simone.o
obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
arch/arm/mach-ep93xx/vision_ep9307.c 0 → 100644
View file @ f906fb1d
/*
* arch/arm/mach-ep93xx/vision_ep9307.c
* Vision Engraving Systems EP9307 SoM support.
*
* Copyright (C) 2008-2011 Vision Engraving Systems
* H Hartley Sweeten <hsweeten@visionengravers.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/fb.h>
#include <linux/io.h>
#include <linux/mtd/partitions.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/i2c/pca953x.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
/*************************************************************************
* Static I/O mappings for the FPGA
*************************************************************************/
#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE
#define VISION_VIRT_BASE 0xfebff000
static struct map_desc vision_io_desc[] __initdata = {
{
.virtual = VISION_VIRT_BASE,
.pfn = __phys_to_pfn(VISION_PHYS_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
static void __init vision_map_io(void)
{
ep93xx_map_io();
iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
}
/*************************************************************************
* Ethernet
*************************************************************************/
static struct ep93xx_eth_data vision_eth_data __initdata = {
.phy_id = 1,
};
/*************************************************************************
* Framebuffer
*************************************************************************/
#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1
static int vision_lcd_setup(struct platform_device *pdev)
{
int err;
err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
dev_name(&pdev->dev));
if (err)
return err;
ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
EP93XX_SYSCON_DEVCFG_RASONP3 |
EP93XX_SYSCON_DEVCFG_EXVC);
return 0;
}
static void vision_lcd_teardown(struct platform_device *pdev)
{
gpio_free(VISION_LCD_ENABLE);
}
static void vision_lcd_blank(int blank_mode, struct fb_info *info)
{
if (blank_mode)
gpio_set_value(VISION_LCD_ENABLE, 0);
else
gpio_set_value(VISION_LCD_ENABLE, 1);
}
static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
.num_modes = EP93XXFB_USE_MODEDB,
.bpp = 16,
.flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
.setup = vision_lcd_setup,
.teardown = vision_lcd_teardown,
.blank = vision_lcd_blank,
};
/*************************************************************************
* GPIO Expanders
*************************************************************************/
#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1)
#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16)
#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16)
#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16)
static struct pca953x_platform_data pca953x_74_gpio_data = {
.gpio_base = PCA9539_74_GPIO_BASE,
.irq_base = EP93XX_BOARD_IRQ(0),
};
static struct pca953x_platform_data pca953x_75_gpio_data = {
.gpio_base = PCA9539_75_GPIO_BASE,
.irq_base = -1,
};
static struct pca953x_platform_data pca953x_76_gpio_data = {
.gpio_base = PCA9539_76_GPIO_BASE,
.irq_base = -1,
};
static struct pca953x_platform_data pca953x_77_gpio_data = {
.gpio_base = PCA9539_77_GPIO_BASE,
.irq_base = -1,
};
/*************************************************************************
* I2C Bus
*************************************************************************/
static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.scl_pin = EP93XX_GPIO_LINE_EECLK,
};
static struct i2c_board_info vision_i2c_info[] __initdata = {
{
I2C_BOARD_INFO("isl1208", 0x6f),
.irq = IRQ_EP93XX_EXT1,
}, {
I2C_BOARD_INFO("pca9539", 0x74),
.platform_data = &pca953x_74_gpio_data,
.irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
}, {
I2C_BOARD_INFO("pca9539", 0x75),
.platform_data = &pca953x_75_gpio_data,
}, {
I2C_BOARD_INFO("pca9539", 0x76),
.platform_data = &pca953x_76_gpio_data,
}, {
I2C_BOARD_INFO("pca9539", 0x77),
.platform_data = &pca953x_77_gpio_data,
},
};
/*************************************************************************
* SPI Flash
*************************************************************************/
#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7
static struct mtd_partition vision_spi_flash_partitions[] = {
{
.name = "SPI bootstrap",
.offset = 0,
.size = SZ_4K,
}, {
.name = "Bootstrap config",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4K,
}, {
.name = "System config",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct flash_platform_data vision_spi_flash_data = {
.name = "SPI Flash",
.parts = vision_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(vision_spi_flash_partitions),
};
static int vision_spi_flash_hw_setup(struct spi_device *spi)
{
return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
spi->modalias);
}
static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
{
gpio_free(VISION_SPI_FLASH_CS);
}
static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
{
gpio_set_value(VISION_SPI_FLASH_CS, value);
}
static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
.setup = vision_spi_flash_hw_setup,
.cleanup = vision_spi_flash_hw_cleanup,
.cs_control = vision_spi_flash_hw_cs_control,
};
/*************************************************************************
* SPI SD/MMC host
*************************************************************************/
#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2)
#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0)
#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15
static struct gpio vision_spi_mmc_gpios[] = {
{ VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
{ VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
};
static int vision_spi_mmc_init(struct device *pdev,
irqreturn_t (*func)(int, void *), void *pdata)
{
int err;
err = gpio_request_array(vision_spi_mmc_gpios,
ARRAY_SIZE(vision_spi_mmc_gpios));
if (err)
return err;
err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
if (err)
goto exit_err;
err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
if (err)
goto exit_err;
return 0;
exit_err:
gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
return err;
}
static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
{
free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
}
static int vision_spi_mmc_get_ro(struct device *pdev)
{
return !!gpio_get_value(VISION_SPI_MMC_WP);
}
static int vision_spi_mmc_get_cd(struct device *pdev)
{
return !gpio_get_value(VISION_SPI_MMC_CD);
}
static struct mmc_spi_platform_data vision_spi_mmc_data = {
.init = vision_spi_mmc_init,
.exit = vision_spi_mmc_exit,
.get_ro = vision_spi_mmc_get_ro,
.get_cd = vision_spi_mmc_get_cd,
.detect_delay = 100,
.powerup_msecs = 100,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
};
static int vision_spi_mmc_hw_setup(struct spi_device *spi)
{
return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
spi->modalias);
}
static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
{
gpio_free(VISION_SPI_MMC_CS);
}
static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
{
gpio_set_value(VISION_SPI_MMC_CS, value);
}
static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
.setup = vision_spi_mmc_hw_setup,
.cleanup = vision_spi_mmc_hw_cleanup,
.cs_control = vision_spi_mmc_hw_cs_control,
};
/*************************************************************************
* SPI Bus
*************************************************************************/
static struct spi_board_info vision_spi_board_info[] __initdata = {
{
.modalias = "sst25l",
.platform_data = &vision_spi_flash_data,
.controller_data = &vision_spi_flash_hw,
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_3,
}, {
.modalias = "mmc_spi",
.platform_data = &vision_spi_mmc_data,
.controller_data = &vision_spi_mmc_hw,
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 1,
.mode = SPI_MODE_3,
},
};
static struct ep93xx_spi_info vision_spi_master __initdata = {
.num_chipselect = ARRAY_SIZE(vision_spi_board_info),
};
/*************************************************************************
* Machine Initialization
*************************************************************************/
static void __init vision_init_machine(void)
{
ep93xx_init_devices();
ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
ep93xx_register_eth(&vision_eth_data, 1);
ep93xx_register_fb(&ep93xxfb_info);
ep93xx_register_pwm(1, 0);
/*
* Request the gpio expander's interrupt gpio line now to prevent
* the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
*/
if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
"pca9539:74"))
pr_warn("cannot request interrupt gpio for pca9539:74\n");
ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
ARRAY_SIZE(vision_i2c_info));
ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
ARRAY_SIZE(vision_spi_board_info));
}
MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
.atag_offset = 0x100,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = vision_init_machine,
MACHINE_END
arch/arm/mach-exynos4/Kconfig
View file @ f906fb1d
......@@ -16,6 +16,16 @@ config CPU_EXYNOS4210
help
Enable EXYNOS4210 CPU support
config SOC_EXYNOS4212
bool
help
Enable EXYNOS4212 SoC support
config SOC_EXYNOS4412
bool
help
Enable EXYNOS4412 SoC support
config EXYNOS4_MCT
bool
default y
......@@ -112,6 +122,8 @@ config EXYNOS4_SETUP_USB_PHY
menu "EXYNOS4 Machines"
comment "EXYNOS4210 Boards"
config MACH_SMDKC210
bool "SMDKC210"
select MACH_SMDKV310
......@@ -204,6 +216,48 @@ config MACH_NURI
help
Machine support for Samsung Mobile NURI Board.
config MACH_ORIGEN
bool "ORIGEN"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_HSMMC2
select EXYNOS4_SETUP_SDHCI
help
Machine support for ORIGEN based on Samsung EXYNOS4210
comment "EXYNOS4212 Boards"
config MACH_SMDK4212
bool "SMDK4212"
select SOC_EXYNOS4212
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C7
select S3C_DEV_RTC
select S3C_DEV_WDT
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung SMDK4212
comment "EXYNOS4412 Boards"
config MACH_SMDK4412
bool "SMDK4412"
select SOC_EXYNOS4412
select MACH_SMDK4212
help
Machine support for Samsung SMDK4412
endmenu
comment "Configuration for HSMMC bus width"
......
arch/arm/mach-exynos4/Makefile
View file @ f906fb1d
......@@ -12,8 +12,10 @@ obj- :=
# Core support for EXYNOS4 system
obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o
obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o
obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
......@@ -30,6 +32,10 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
obj-$(CONFIG_MACH_NURI) += mach-nuri.o
obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
# device support
......
arch/arm/mach-exynos4/clock-exynos4210.c 0 → 100644
View file @ f906fb1d
/*
* linux/arch/arm/mach-exynos4/clock-exynos4210.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4210 - Clock support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/exynos4-clock.h>
static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD1),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
SAVE_ITEM(S5P_CLKDIV_LCD1),
SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
};
static struct clksrc_clk *sysclks[] = {
/* nothing here yet */
};
static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
}
static struct clksrc_clk clksrcs[] = {
{
.clk = {
.name = "sclk_sata",
.id = -1,
.enable = exynos4_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 24),
},
.sources = &clkset_mout_corebus,
.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
}, {
.clk = {
.name = "sclk_fimd",
.devname = "exynos4-fb.1",
.enable = exynos4_clksrc_mask_lcd1_ctrl,
.ctrlbit = (1 << 0),
},
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
},
};
static struct clk init_clocks_off[] = {
{
.name = "sataphy",
.id = -1,
.parent = &clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "sata",
.id = -1,
.parent = &clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 10),
}, {
.name = "fimd",
.devname = "exynos4-fb.1",
.enable = exynos4_clk_ip_lcd1_ctrl,
.ctrlbit = (1 << 0),
},
};
#ifdef CONFIG_PM_SLEEP
static int exynos4210_clock_suspend(void)
{
s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
return 0;
}
static void exynos4210_clock_resume(void)
{
s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
}
#else
#define exynos4210_clock_suspend NULL
#define exynos4210_clock_resume NULL
#endif
struct syscore_ops exynos4210_clock_syscore_ops = {
.suspend = exynos4210_clock_suspend,
.resume = exynos4210_clock_resume,
};
void __init exynos4210_register_clocks(void)
{
int ptr;
clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
clk_mout_mpll.reg_src.shift = 8;
clk_mout_mpll.reg_src.size = 1;
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
register_syscore_ops(&exynos4210_clock_syscore_ops);
}
arch/arm/mach-exynos4/clock-exynos4212.c 0 → 100644
View file @ f906fb1d
/*
* linux/arch/arm/mach-exynos4/clock-exynos4212.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4212 - Clock support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/exynos4-clock.h>
static struct sleep_save exynos4212_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
};
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
[1] = &clk_mout_mpll.clk,
};
static struct clksrc_sources clk_src_mpll_user = {
.sources = clk_src_mpll_user_list,
.nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
};
static struct clksrc_clk clk_mout_mpll_user = {
.clk = {
.name = "mout_mpll_user",
},
.sources = &clk_src_mpll_user,
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
};
static struct clksrc_clk *sysclks[] = {
&clk_mout_mpll_user,
};
static struct clksrc_clk clksrcs[] = {
/* nothing here yet */
};
static struct clk init_clocks_off[] = {
/* nothing here yet */
};
#ifdef CONFIG_PM_SLEEP
static int exynos4212_clock_suspend(void)
{
s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
return 0;
}
static void exynos4212_clock_resume(void)
{
s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
}
#else
#define exynos4212_clock_suspend NULL
#define exynos4212_clock_resume NULL
#endif
struct syscore_ops exynos4212_clock_syscore_ops = {
.suspend = exynos4212_clock_suspend,
.resume = exynos4212_clock_resume,
};
void __init exynos4212_register_clocks(void)
{
int ptr;
/* usbphy1 is removed */
clkset_group_list[4] = NULL;
/* mout_mpll_user is used */
clkset_group_list[6] = &clk_mout_mpll_user.clk;
clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
clk_mout_mpll.reg_src.shift = 12;
clk_mout_mpll.reg_src.size = 1;
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
register_syscore_ops(&exynos4212_clock_syscore_ops);
}
arch/arm/mach-exynos4/clock.c
View file @ f906fb1d
......@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
......@@ -20,26 +21,93 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/sysmmu.h>
static struct clk clk_sclk_hdmi27m = {
#include <mach/exynos4-clock.h>
static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
SAVE_ITEM(S5P_CLKSRC_TOP0),
SAVE_ITEM(S5P_CLKSRC_TOP1),
SAVE_ITEM(S5P_CLKSRC_CAM),
SAVE_ITEM(S5P_CLKSRC_TV),
SAVE_ITEM(S5P_CLKSRC_MFC),
SAVE_ITEM(S5P_CLKSRC_G3D),
SAVE_ITEM(S5P_CLKSRC_LCD0),
SAVE_ITEM(S5P_CLKSRC_MAUDIO),
SAVE_ITEM(S5P_CLKSRC_FSYS),
SAVE_ITEM(S5P_CLKSRC_PERIL0),
SAVE_ITEM(S5P_CLKSRC_PERIL1),
SAVE_ITEM(S5P_CLKDIV_CAM),
SAVE_ITEM(S5P_CLKDIV_TV),
SAVE_ITEM(S5P_CLKDIV_MFC),
SAVE_ITEM(S5P_CLKDIV_G3D),
SAVE_ITEM(S5P_CLKDIV_LCD0),
SAVE_ITEM(S5P_CLKDIV_MAUDIO),
SAVE_ITEM(S5P_CLKDIV_FSYS0),
SAVE_ITEM(S5P_CLKDIV_FSYS1),
SAVE_ITEM(S5P_CLKDIV_FSYS2),
SAVE_ITEM(S5P_CLKDIV_FSYS3),
SAVE_ITEM(S5P_CLKDIV_PERIL0),
SAVE_ITEM(S5P_CLKDIV_PERIL1),
SAVE_ITEM(S5P_CLKDIV_PERIL2),
SAVE_ITEM(S5P_CLKDIV_PERIL3),
SAVE_ITEM(S5P_CLKDIV_PERIL4),
SAVE_ITEM(S5P_CLKDIV_PERIL5),
SAVE_ITEM(S5P_CLKDIV_TOP),
SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
SAVE_ITEM(S5P_CLKSRC_MASK_TV),
SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
SAVE_ITEM(S5P_CLKDIV2_RATIO),
SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
SAVE_ITEM(S5P_CLKGATE_IP_CAM),
SAVE_ITEM(S5P_CLKGATE_IP_TV),
SAVE_ITEM(S5P_CLKGATE_IP_MFC),
SAVE_ITEM(S5P_CLKGATE_IP_G3D),
SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
SAVE_ITEM(S5P_CLKGATE_IP_GPS),
SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
SAVE_ITEM(S5P_CLKGATE_BLOCK),
SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
SAVE_ITEM(S5P_CLKSRC_DMC),
SAVE_ITEM(S5P_CLKDIV_DMC0),
SAVE_ITEM(S5P_CLKDIV_DMC1),
SAVE_ITEM(S5P_CLKGATE_IP_DMC),
SAVE_ITEM(S5P_CLKSRC_CPU),
SAVE_ITEM(S5P_CLKDIV_CPU),
SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
SAVE_ITEM(S5P_CLKGATE_IP_CPU),
};
struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.rate = 27000000,
};
static struct clk clk_sclk_hdmiphy = {
struct clk clk_sclk_hdmiphy = {
.name = "sclk_hdmiphy",
};
static struct clk clk_sclk_usbphy0 = {
struct clk clk_sclk_usbphy0 = {
.name = "sclk_usbphy0",
.rate = 27000000,
};
static struct clk clk_sclk_usbphy1 = {
struct clk clk_sclk_usbphy1 = {
.name = "sclk_usbphy1",
};
......@@ -58,12 +126,7 @@ static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
}
static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
}
static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
}
......@@ -103,12 +166,12 @@ static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
}
static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
}
static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
}
......@@ -133,7 +196,7 @@ static struct clksrc_clk clk_mout_apll = {
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
};
static struct clksrc_clk clk_sclk_apll = {
struct clksrc_clk clk_sclk_apll = {
.clk = {
.name = "sclk_apll",
.parent = &clk_mout_apll.clk,
......@@ -141,7 +204,7 @@ static struct clksrc_clk clk_sclk_apll = {
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
};
static struct clksrc_clk clk_mout_epll = {
struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
},
......@@ -149,12 +212,13 @@ static struct clksrc_clk clk_mout_epll = {
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
};
static struct clksrc_clk clk_mout_mpll = {
struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
.sources = &clk_src_mpll,
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
/* reg_src will be added in each SoCs' clock */
};
static struct clk *clkset_moutcore_list[] = {
......@@ -224,12 +288,12 @@ static struct clksrc_clk clk_periphclk = {
/* Core list of CMU_CORE side */
static struct clk *clkset_corebus_list[] = {
struct clk *clkset_corebus_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
static struct clksrc_sources clkset_mout_corebus = {
struct clksrc_sources clkset_mout_corebus = {
.sources = clkset_corebus_list,
.nr_sources = ARRAY_SIZE(clkset_corebus_list),
};
......@@ -284,12 +348,12 @@ static struct clksrc_clk clk_pclk_acp = {
/* Core list of CMU_TOP side */
static struct clk *clkset_aclk_top_list[] = {
struct clk *clkset_aclk_top_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
static struct clksrc_sources clkset_aclk = {
struct clksrc_sources clkset_aclk = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
......@@ -321,7 +385,7 @@ static struct clksrc_clk clk_aclk_160 = {
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
};
static struct clksrc_clk clk_aclk_133 = {
struct clksrc_clk clk_aclk_133 = {
.clk = {
.name = "aclk_133",
},
......@@ -360,7 +424,7 @@ static struct clksrc_sources clkset_sclk_vpll = {
.nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
};
static struct clksrc_clk clk_sclk_vpll = {
struct clksrc_clk clk_sclk_vpll = {
.clk = {
.name = "sclk_vpll",
},
......@@ -409,16 +473,6 @@ static struct clk init_clocks_off[] = {
.devname = "exynos4-fb.0",
.enable = exynos4_clk_ip_lcd0_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "fimd",
.devname = "exynos4-fb.1",
.enable = exynos4_clk_ip_lcd1_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "sataphy",
.parent = &clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "hsmmc",
.devname = "s3c-sdhci.0",
......@@ -448,11 +502,6 @@ static struct clk init_clocks_off[] = {
.parent = &clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
}, {
.name = "sata",
.parent = &clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 10),
}, {
.name = "pdma",
.devname = "s3c-pl330.0",
......@@ -673,7 +722,7 @@ static struct clk init_clocks[] = {
}
};
static struct clk *clkset_group_list[] = {
struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
[2] = &clk_sclk_hdmi27m,
......@@ -685,7 +734,7 @@ static struct clk *clkset_group_list[] = {
[8] = &clk_sclk_vpll.clk,
};
static struct clksrc_sources clkset_group = {
struct clksrc_sources clkset_group = {
.sources = clkset_group_list,
.nr_sources = ARRAY_SIZE(clkset_group_list),
};
......@@ -965,25 +1014,6 @@ static struct clksrc_clk clksrcs[] = {
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
}, {
.clk = {
.name = "sclk_fimd",
.devname = "exynos4-fb.1",
.enable = exynos4_clksrc_mask_lcd1_ctrl,
.ctrlbit = (1 << 0),
},
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
}, {
.clk = {
.name = "sclk_sata",
.enable = exynos4_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 24),
},
.sources = &clkset_mout_corebus,
.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
}, {
.clk = {
.name = "sclk_spi",
......@@ -1114,7 +1144,13 @@ static int xtal_rate;
static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
{
return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
if (soc_is_exynos4210())
return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
pll_4508);
else if (soc_is_exynos4212() || soc_is_exynos4412())
return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
else
return 0;
}
static struct clk_ops exynos4_fout_apll_ops = {
......@@ -1124,10 +1160,10 @@ static struct clk_ops exynos4_fout_apll_ops = {
void __init_or_cpufreq exynos4_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long apll;
unsigned long mpll;
unsigned long epll;
unsigned long vpll;
unsigned long apll = 0;
unsigned long mpll = 0;
unsigned long epll = 0;
unsigned long vpll = 0;
unsigned long vpllsrc;
unsigned long xtal;
unsigned long armclk;
......@@ -1151,14 +1187,29 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
__raw_readl(S5P_EPLL_CON1), pll_4600);
vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
__raw_readl(S5P_VPLL_CON1), pll_4650c);
if (soc_is_exynos4210()) {
apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
pll_4508);
mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
pll_4508);
epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
__raw_readl(S5P_EPLL_CON1), pll_4600);
vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
__raw_readl(S5P_VPLL_CON1), pll_4650c);
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
__raw_readl(S5P_EPLL_CON1));
vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
__raw_readl(S5P_VPLL_CON1));
} else {
/* nothing */
}
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
......@@ -1193,6 +1244,28 @@ static struct clk *clks[] __initdata = {
/* Nothing here yet */
};
#ifdef CONFIG_PM_SLEEP
static int exynos4_clock_suspend(void)
{
s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
return 0;
}
static void exynos4_clock_resume(void)
{
s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
}
#else
#define exynos4_clock_suspend NULL
#define exynos4_clock_resume NULL
#endif
struct syscore_ops exynos4_clock_syscore_ops = {
.suspend = exynos4_clock_suspend,
.resume = exynos4_clock_resume,
};
void __init exynos4_register_clocks(void)
{
int ptr;
......@@ -1208,5 +1281,6 @@ void __init exynos4_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
register_syscore_ops(&exynos4_clock_syscore_ops);
s3c_pwmclk_init();
}
arch/arm/mach-exynos4/cpu.c
View file @ f906fb1d
......@@ -32,6 +32,8 @@
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
unsigned int gic_bank_offset __read_mostly;
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
......@@ -43,11 +45,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
......@@ -121,6 +118,24 @@ static struct map_desc exynos4_iodesc[] __initdata = {
},
};
static struct map_desc exynos4_iodesc0[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
static struct map_desc exynos4_iodesc1[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
static void exynos4_idle(void)
{
if (!need_resched())
......@@ -143,6 +158,11 @@ void __init exynos4_map_io(void)
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
else
iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
/* initialize device information early */
exynos4_default_sdhci0();
exynos4_default_sdhci1();
......@@ -170,24 +190,37 @@ void __init exynos4_init_clocks(int xtal)
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
if (soc_is_exynos4210())
exynos4210_register_clocks();
else if (soc_is_exynos4212() || soc_is_exynos4412())
exynos4212_register_clocks();
exynos4_register_clocks();
exynos4_setup_clocks();
}
static void exynos4_gic_irq_eoi(struct irq_data *d)
static void exynos4_gic_irq_fix_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
gic_data->cpu_base = S5P_VA_GIC_CPU +
(EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
(gic_bank_offset * smp_processor_id());
gic_data->dist_base = S5P_VA_GIC_DIST +
(gic_bank_offset * smp_processor_id());
}
void __init exynos4_init_irq(void)
{
int irq;
gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
......@@ -223,7 +256,11 @@ static int __init exynos4_l2x0_cache_init(void)
{
/* TAG, Data Latency Control: 2cycle */
__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
if (soc_is_exynos4210())
__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
else if (soc_is_exynos4212() || soc_is_exynos4412())
__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
/* L2X0 Prefetch Control */
__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
......
arch/arm/mach-exynos4/include/mach/entry-macro.S
View file @ f906fb1d
......@@ -17,12 +17,25 @@
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
mov \tmp, #0
mrc p15, 0, \base, c0, c0, 5
and \base, \base, #3
cmp \base, #0
beq 1f
ldr \tmp, =gic_bank_offset
ldr \tmp, [\tmp]
cmp \base, #1
beq 1f
cmp \base, #2
addeq \tmp, \tmp, \tmp
addne \tmp, \tmp, \tmp, LSL #1
1: ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
mrc p15, 0, \tmp, c0, c0, 5
and \tmp, \tmp, #3
cmp \tmp, #1
addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET
add \base, \base, \tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
......
arch/arm/mach-exynos4/include/mach/exynos4-clock.h 0 → 100644
View file @ f906fb1d
/*
* linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Header file for exynos4 clock support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_CLOCK_H
#define __ASM_ARCH_CLOCK_H __FILE__
#include <linux/clk.h>
extern struct clk clk_sclk_hdmi27m;
extern struct clk clk_sclk_usbphy0;
extern struct clk clk_sclk_usbphy1;
extern struct clk clk_sclk_hdmiphy;
extern struct clksrc_clk clk_sclk_apll;
extern struct clksrc_clk clk_mout_mpll;
extern struct clksrc_clk clk_aclk_133;
extern struct clksrc_clk clk_mout_epll;
extern struct clksrc_clk clk_sclk_vpll;
extern struct clk *clkset_corebus_list[];
extern struct clksrc_sources clkset_mout_corebus;
extern struct clk *clkset_aclk_top_list[];
extern struct clksrc_sources clkset_aclk;
extern struct clk *clkset_group_list[];
extern struct clksrc_sources clkset_group;
extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
#endif /* __ASM_ARCH_CLOCK_H */
arch/arm/mach-exynos4/include/mach/irqs.h
View file @ f906fb1d
......@@ -19,6 +19,8 @@
#define IRQ_PPI(x) S5P_IRQ(x+16)
#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
/* SPI: Shared Peripheral Interrupt */
#define IRQ_SPI(x) S5P_IRQ(x+32)
......
arch/arm/mach-exynos4/include/mach/map.h
View file @ f906fb1d
......@@ -23,7 +23,8 @@
#include <plat/map-s5p.h>
#define EXYNOS4_PA_SYSRAM 0x02020000
#define EXYNOS4_PA_SYSRAM0 0x02025000
#define EXYNOS4_PA_SYSRAM1 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
......@@ -61,7 +62,6 @@
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
#define EXYNOS4_GIC_BANK_OFFSET 0x8000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
......
arch/arm/mach-exynos4/include/mach/regs-clock.h
View file @ f906fb1d
......@@ -13,6 +13,7 @@
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
#include <plat/cpu.h>
#include <mach/map.h>
#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
......@@ -41,12 +42,20 @@
#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
......@@ -54,7 +63,6 @@
#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
......@@ -68,16 +76,6 @@
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
......@@ -85,13 +83,20 @@
#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930)
#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
S5P_CLKREG(0x0C930) : \
S5P_CLKREG(0x04930))
#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930)
#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930)
#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960)
#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
S5P_CLKREG(0x0C960) : \
S5P_CLKREG(0x08960))
#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960)
#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960)
#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
......@@ -102,11 +107,17 @@
#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
#define S5P_MPLL_LOCK S5P_CLKREG(0x14004)
#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \
S5P_CLKREG(0x14004) : \
S5P_CLKREG(0x10008))
#define S5P_APLL_CON0 S5P_CLKREG(0x14100)
#define S5P_APLL_CON1 S5P_CLKREG(0x14104)
#define S5P_MPLL_CON0 S5P_CLKREG(0x14108)
#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C)
#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \
S5P_CLKREG(0x14108) : \
S5P_CLKREG(0x10108))
#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \
S5P_CLKREG(0x1410C) : \
S5P_CLKREG(0x1010C))
#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200)
#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400)
......@@ -183,6 +194,13 @@
#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
/* Only for EXYNOS4210 */
#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
......
arch/arm/mach-exynos4/include/mach/regs-mct.h
View file @ f906fb1d
......@@ -31,8 +31,9 @@
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300)
#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400)
#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
#define EXYNOS4_MCT_L_MASK (0xffffff00)
#define MCT_L_TCNTB_OFFSET (0x00)
#define MCT_L_ICNTB_OFFSET (0x08)
......
arch/arm/mach-exynos4/mach-origen.c 0 → 100644
View file @ f906fb1d
/* linux/arch/arm/mach-exynos4/mach-origen.c
*
* Copyright (c) 2011 Insignal Co., Ltd.
* http://www.insignal.co.kr/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/serial_core.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/input.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
#include <mach/map.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
};
static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = EXYNOS4_GPK2(2),
.ext_cd_gpio_invert = 1,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
static struct platform_device *origen_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_rtc,
&s3c_device_wdt,
};
static void __init origen_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
static void __init origen_machine_init(void)
{
s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
}
MACHINE_START(ORIGEN, "ORIGEN")
/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
.init_machine = origen_machine_init,
.timer = &exynos4_timer,
MACHINE_END
arch/arm/mach-exynos4/mach-smdk4x12.c 0 → 100644
View file @ f906fb1d
/*
* linux/arch/arm/mach-exynos4/mach-smdk4x12.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/mfd/max8997.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/machine.h>
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/backlight.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/exynos4.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <plat/keypad.h>
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
#include <mach/map.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = SMDK4X12_UCON_DEFAULT,
.ulcon = SMDK4X12_ULCON_DEFAULT,
.ufcon = SMDK4X12_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = SMDK4X12_UCON_DEFAULT,
.ulcon = SMDK4X12_ULCON_DEFAULT,
.ufcon = SMDK4X12_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = SMDK4X12_UCON_DEFAULT,
.ulcon = SMDK4X12_ULCON_DEFAULT,
.ufcon = SMDK4X12_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = SMDK4X12_UCON_DEFAULT,
.ulcon = SMDK4X12_ULCON_DEFAULT,
.ufcon = SMDK4X12_UFCON_DEFAULT,
},
};
static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
.max_width = 8,
.host_caps = MMC_CAP_8_BIT_DATA,
#endif
};
static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
static struct regulator_consumer_supply max8997_buck1 =
REGULATOR_SUPPLY("vdd_arm", NULL);
static struct regulator_consumer_supply max8997_buck2 =
REGULATOR_SUPPLY("vdd_int", NULL);
static struct regulator_consumer_supply max8997_buck3 =
REGULATOR_SUPPLY("vdd_g3d", NULL);
static struct regulator_init_data max8997_buck1_data = {
.constraints = {
.name = "VDD_ARM_SMDK4X12",
.min_uV = 925000,
.max_uV = 1350000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &max8997_buck1,
};
static struct regulator_init_data max8997_buck2_data = {
.constraints = {
.name = "VDD_INT_SMDK4X12",
.min_uV = 950000,
.max_uV = 1150000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &max8997_buck2,
};
static struct regulator_init_data max8997_buck3_data = {
.constraints = {
.name = "VDD_G3D_SMDK4X12",
.min_uV = 950000,
.max_uV = 1150000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &max8997_buck3,
};
static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
{ MAX8997_BUCK1, &max8997_buck1_data },
{ MAX8997_BUCK2, &max8997_buck2_data },
{ MAX8997_BUCK3, &max8997_buck3_data },
};
static struct max8997_platform_data smdk4x12_max8997_pdata = {
.num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
.regulators = smdk4x12_max8997_regulators,
.buck1_voltage[0] = 1100000, /* 1.1V */
.buck1_voltage[1] = 1100000, /* 1.1V */
.buck1_voltage[2] = 1100000, /* 1.1V */
.buck1_voltage[3] = 1100000, /* 1.1V */
.buck1_voltage[4] = 1100000, /* 1.1V */
.buck1_voltage[5] = 1100000, /* 1.1V */
.buck1_voltage[6] = 1000000, /* 1.0V */
.buck1_voltage[7] = 950000, /* 0.95V */
.buck2_voltage[0] = 1100000, /* 1.1V */
.buck2_voltage[1] = 1000000, /* 1.0V */
.buck2_voltage[2] = 950000, /* 0.95V */
.buck2_voltage[3] = 900000, /* 0.9V */
.buck2_voltage[4] = 1100000, /* 1.1V */
.buck2_voltage[5] = 1000000, /* 1.0V */
.buck2_voltage[6] = 950000, /* 0.95V */
.buck2_voltage[7] = 900000, /* 0.9V */
.buck5_voltage[0] = 1100000, /* 1.1V */
.buck5_voltage[1] = 1100000, /* 1.1V */
.buck5_voltage[2] = 1100000, /* 1.1V */
.buck5_voltage[3] = 1100000, /* 1.1V */
.buck5_voltage[4] = 1100000, /* 1.1V */
.buck5_voltage[5] = 1100000, /* 1.1V */
.buck5_voltage[6] = 1100000, /* 1.1V */
.buck5_voltage[7] = 1100000, /* 1.1V */
};
static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
{
I2C_BOARD_INFO("max8997", 0x66),
.platform_data = &smdk4x12_max8997_pdata,
}
};
static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("wm8994", 0x1a), }
};
static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
/* nothing here yet */
};
static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
/* nothing here yet */
};
static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
.no = EXYNOS4_GPD0(1),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data smdk4x12_bl_data = {
.pwm_id = 1,
.pwm_period_ns = 1000,
};
static uint32_t smdk4x12_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
};
static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
.keymap = smdk4x12_keymap,
.keymap_size = ARRAY_SIZE(smdk4x12_keymap),
};
static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
.keymap_data = &smdk4x12_keymap_data,
.rows = 2,
.cols = 5,
};
static struct platform_device *smdk4x12_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_i2c3,
&s3c_device_i2c7,
&s3c_device_rtc,
&s3c_device_wdt,
&samsung_device_keypad,
};
static void __init smdk4x12_map_io(void)
{
clk_xusbxti.rate = 24000000;
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
}
static void __init smdk4x12_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, smdk4x12_i2c_devs0,
ARRAY_SIZE(smdk4x12_i2c_devs0));
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(1, smdk4x12_i2c_devs1,
ARRAY_SIZE(smdk4x12_i2c_devs1));
s3c_i2c3_set_platdata(NULL);
i2c_register_board_info(3, smdk4x12_i2c_devs3,
ARRAY_SIZE(smdk4x12_i2c_devs3));
s3c_i2c7_set_platdata(NULL);
i2c_register_board_info(7, smdk4x12_i2c_devs7,
ARRAY_SIZE(smdk4x12_i2c_devs7));
samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
samsung_keypad_set_platdata(&smdk4x12_keypad_data);
s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
}
MACHINE_START(SMDK4212, "SMDK4212")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
MACHINE_END
MACHINE_START(SMDK4412, "SMDK4412")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
MACHINE_END
arch/arm/mach-exynos4/mct.c
View file @ f906fb1d
......@@ -20,19 +20,31 @@
#include <linux/delay.h>
#include <linux/percpu.h>
#include <asm/hardware/gic.h>
#include <plat/cpu.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/regs-mct.h>
#include <asm/mach/time.h>
enum {
MCT_INT_SPI,
MCT_INT_PPI
};
static unsigned long clk_cnt_per_tick;
static unsigned long clk_rate;
static unsigned int mct_int_type;
struct mct_clock_event_device {
struct clock_event_device *evt;
void __iomem *base;
char name[10];
};
struct mct_clock_event_device mct_tick[2];
struct mct_clock_event_device mct_tick[NR_CPUS];
static void exynos4_mct_write(unsigned int value, void *addr)
{
......@@ -42,57 +54,53 @@ static void exynos4_mct_write(unsigned int value, void *addr)
__raw_writel(value, addr);
switch ((u32) addr) {
case (u32) EXYNOS4_MCT_G_TCON:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 16; /* G_TCON write status */
break;
case (u32) EXYNOS4_MCT_G_COMP0_L:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 0; /* G_COMP0_L write status */
break;
case (u32) EXYNOS4_MCT_G_COMP0_U:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 1; /* G_COMP0_U write status */
break;
case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 2; /* G_COMP0_ADD_INCR write status */
break;
case (u32) EXYNOS4_MCT_G_CNT_L:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 0; /* G_CNT_L write status */
break;
case (u32) EXYNOS4_MCT_G_CNT_U:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 1; /* G_CNT_U write status */
break;
case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
mask = 1 << 3; /* L0_TCON write status */
break;
case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
mask = 1 << 3; /* L1_TCON write status */
break;
case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
mask = 1 << 0; /* L0_TCNTB write status */
break;
case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
mask = 1 << 0; /* L1_TCNTB write status */
break;
case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
mask = 1 << 1; /* L0_ICNTB write status */
break;
case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
mask = 1 << 1; /* L1_ICNTB write status */
break;
default:
return;
if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
case (u32) MCT_L_TCON_OFFSET:
stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
mask = 1 << 3; /* L_TCON write status */
break;
case (u32) MCT_L_ICNTB_OFFSET:
stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
mask = 1 << 1; /* L_ICNTB write status */
break;
case (u32) MCT_L_TCNTB_OFFSET:
stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
mask = 1 << 0; /* L_TCNTB write status */
break;
default:
return;
}
} else {
switch ((u32) addr) {
case (u32) EXYNOS4_MCT_G_TCON:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 16; /* G_TCON write status */
break;
case (u32) EXYNOS4_MCT_G_COMP0_L:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 0; /* G_COMP0_L write status */
break;
case (u32) EXYNOS4_MCT_G_COMP0_U:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 1; /* G_COMP0_U write status */
break;
case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
break;
case (u32) EXYNOS4_MCT_G_CNT_L:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 0; /* G_CNT_L write status */
break;
case (u32) EXYNOS4_MCT_G_CNT_U:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 1; /* G_CNT_U write status */
break;
default:
return;
}
}
/* Wait maximum 1 ms until written values are applied */
......@@ -321,9 +329,8 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
}
}
static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
{
struct mct_clock_event_device *mevt = dev_id;
struct clock_event_device *evt = mevt->evt;
/*
......@@ -335,7 +342,20 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
return 1;
} else {
return 0;
}
}
static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
{
struct mct_clock_event_device *mevt = dev_id;
struct clock_event_device *evt = mevt->evt;
exynos4_mct_tick_clear(mevt);
evt->event_handler(evt);
......@@ -360,14 +380,10 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
mct_tick[cpu].evt = evt;
if (cpu == 0) {
mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
evt->name = "mct_tick0";
} else {
mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
evt->name = "mct_tick1";
}
mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
evt->name = mct_tick[cpu].name;
evt->cpumask = cpumask_of(cpu);
evt->set_next_event = exynos4_tick_set_next_event;
evt->set_mode = exynos4_tick_set_mode;
......@@ -384,15 +400,19 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
if (cpu == 0) {
mct_tick0_event_irq.dev_id = &mct_tick[cpu];
evt->irq = IRQ_MCT_L0;
setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
mct_tick0_event_irq.dev_id = &mct_tick[cpu];
evt->irq = IRQ_MCT_L0;
setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
mct_tick1_event_irq.dev_id = &mct_tick[cpu];
evt->irq = IRQ_MCT_L1;
setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
}
} else {
mct_tick1_event_irq.dev_id = &mct_tick[cpu];
evt->irq = IRQ_MCT_L1;
setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
gic_enable_ppi(IRQ_MCT_LOCALTIMER);
}
}
......@@ -422,6 +442,11 @@ static void __init exynos4_timer_resources(void)
static void __init exynos4_timer_init(void)
{
if (soc_is_exynos4210())
mct_int_type = MCT_INT_SPI;
else
mct_int_type = MCT_INT_PPI;
exynos4_timer_resources();
exynos4_clocksource_init();
exynos4_clockevent_init();
......
arch/arm/mach-exynos4/platsmp.c
View file @ f906fb1d
......@@ -30,9 +30,13 @@
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
extern unsigned int gic_bank_offset;
extern void exynos4_secondary_startup(void);
#define CPU1_BOOT_REG S5P_VA_SYSRAM
#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM5 : S5P_VA_SYSRAM)
/*
* control for which core is the next to come out of the secondary
......@@ -64,9 +68,9 @@ static DEFINE_SPINLOCK(boot_lock);
static void __cpuinit exynos4_gic_secondary_init(void)
{
void __iomem *dist_base = S5P_VA_GIC_DIST +
(EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
(gic_bank_offset * smp_processor_id());
void __iomem *cpu_base = S5P_VA_GIC_CPU +
(EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
(gic_bank_offset * smp_processor_id());
int i;
/*
......@@ -216,5 +220,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
CPU1_BOOT_REG);
}
arch/arm/mach-exynos4/pm.c
View file @ f906fb1d
......@@ -41,7 +41,6 @@ static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, },
{ .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, },
{ .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
{ .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
{ .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
{ .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, },
{ .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
......@@ -49,6 +48,10 @@ static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
static struct sleep_save exynos4210_set_clksrc[] = {
{ .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
};
static struct sleep_save exynos4_epll_save[] = {
SAVE_ITEM(S5P_EPLL_CON0),
SAVE_ITEM(S5P_EPLL_CON1),
......@@ -60,77 +63,6 @@ static struct sleep_save exynos4_vpll_save[] = {
};
static struct sleep_save exynos4_core_save[] = {
/* CMU side */
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
SAVE_ITEM(S5P_CLKSRC_TOP0),
SAVE_ITEM(S5P_CLKSRC_TOP1),
SAVE_ITEM(S5P_CLKSRC_CAM),
SAVE_ITEM(S5P_CLKSRC_TV),
SAVE_ITEM(S5P_CLKSRC_MFC),
SAVE_ITEM(S5P_CLKSRC_G3D),
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD0),
SAVE_ITEM(S5P_CLKSRC_LCD1),
SAVE_ITEM(S5P_CLKSRC_MAUDIO),
SAVE_ITEM(S5P_CLKSRC_FSYS),
SAVE_ITEM(S5P_CLKSRC_PERIL0),
SAVE_ITEM(S5P_CLKSRC_PERIL1),
SAVE_ITEM(S5P_CLKDIV_CAM),
SAVE_ITEM(S5P_CLKDIV_TV),
SAVE_ITEM(S5P_CLKDIV_MFC),
SAVE_ITEM(S5P_CLKDIV_G3D),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
SAVE_ITEM(S5P_CLKDIV_LCD0),
SAVE_ITEM(S5P_CLKDIV_LCD1),
SAVE_ITEM(S5P_CLKDIV_MAUDIO),
SAVE_ITEM(S5P_CLKDIV_FSYS0),
SAVE_ITEM(S5P_CLKDIV_FSYS1),
SAVE_ITEM(S5P_CLKDIV_FSYS2),
SAVE_ITEM(S5P_CLKDIV_FSYS3),
SAVE_ITEM(S5P_CLKDIV_PERIL0),
SAVE_ITEM(S5P_CLKDIV_PERIL1),
SAVE_ITEM(S5P_CLKDIV_PERIL2),
SAVE_ITEM(S5P_CLKDIV_PERIL3),
SAVE_ITEM(S5P_CLKDIV_PERIL4),
SAVE_ITEM(S5P_CLKDIV_PERIL5),
SAVE_ITEM(S5P_CLKDIV_TOP),
SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
SAVE_ITEM(S5P_CLKSRC_MASK_TV),
SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
SAVE_ITEM(S5P_CLKDIV2_RATIO),
SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
SAVE_ITEM(S5P_CLKGATE_IP_CAM),
SAVE_ITEM(S5P_CLKGATE_IP_TV),
SAVE_ITEM(S5P_CLKGATE_IP_MFC),
SAVE_ITEM(S5P_CLKGATE_IP_G3D),
SAVE_ITEM(S5P_CLKGATE_IP_IMAGE),
SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
SAVE_ITEM(S5P_CLKGATE_IP_GPS),
SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR),
SAVE_ITEM(S5P_CLKGATE_BLOCK),
SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
SAVE_ITEM(S5P_CLKSRC_DMC),
SAVE_ITEM(S5P_CLKDIV_DMC0),
SAVE_ITEM(S5P_CLKDIV_DMC1),
SAVE_ITEM(S5P_CLKGATE_IP_DMC),
SAVE_ITEM(S5P_CLKSRC_CPU),
SAVE_ITEM(S5P_CLKDIV_CPU),
SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
SAVE_ITEM(S5P_CLKGATE_IP_CPU),
/* GIC side */
SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
......@@ -268,6 +200,9 @@ static void exynos4_pm_prepare(void)
s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
if (soc_is_exynos4210())
s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
}
static int exynos4_pm_add(struct sys_device *sysdev)
......
arch/arm/mach-ixp4xx/Kconfig
View file @ f906fb1d
......@@ -179,6 +179,25 @@ config MACH_GTWX5715
"High Speed" UART is n/c (as far as I can tell)
20 Pin ARM/Xscale JTAG interface on J2
config MACH_DEVIXP
bool "Omicron DEVIXP"
help
Say 'Y' here if you want your kernel to support the DEVIXP
board from OMICRON electronics GmbH.
config MACH_MICCPT
bool "Omicron MICCPT"
select PCI
help
Say 'Y' here if you want your kernel to support the MICCPT
board from OMICRON electronics GmbH.
config MACH_MIC256
bool "Omicron MIC256"
help
Say 'Y' here if you want your kernel to support the MIC256
board from OMICRON electronics GmbH.
comment "IXP4xx Options"
config IXP4XX_INDIRECT_PCI
......
arch/arm/mach-ixp4xx/Makefile
View file @ f906fb1d
......@@ -10,6 +10,7 @@ obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
......@@ -25,6 +26,9 @@ obj-$(CONFIG_MACH_AVILA) += avila-setup.o
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o
obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o
obj-$(CONFIG_MACH_MIC256) += omixp-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
......
arch/arm/mach-ixp4xx/include/mach/uncompress.h
View file @ f906fb1d
......@@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
* Some boards are using UART2 as console
*/
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
machine_is_gateway7001() || machine_is_wg302v2())
machine_is_gateway7001() || machine_is_wg302v2() ||
machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
else
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
......
arch/arm/mach-ixp4xx/miccpt-pci.c 0 → 100644
View file @ f906fb1d
/*
* arch/arm/mach-ixp4xx/miccpt-pci.c
*
* MICCPT board-level PCI initialization
*
* Copyright (C) 2002 Intel Corporation.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
* Copyright (C) 2006 OMICRON electronics GmbH
*
* Author: Michael Jochum <michael.jochum@omicron.at>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <asm/mach/pci.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#define MAX_DEV 4
#define IRQ_LINES 4
/* PCI controller GPIO to IRQ pin mappings */
#define INTA 1
#define INTB 2
#define INTC 3
#define INTD 4
void __init miccpt_pci_preinit(void)
{
irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit();
}
static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[IRQ_LINES] = {
IXP4XX_GPIO_IRQ(INTA),
IXP4XX_GPIO_IRQ(INTB),
IXP4XX_GPIO_IRQ(INTC),
IXP4XX_GPIO_IRQ(INTD)
};
if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
return pci_irq_table[(slot + pin - 2) % 4];
return -1;
}
struct hw_pci miccpt_pci __initdata = {
.nr_controllers = 1,
.preinit = miccpt_pci_preinit,
.swizzle = pci_std_swizzle,
.setup = ixp4xx_setup,
.scan = ixp4xx_scan_bus,
.map_irq = miccpt_map_irq,
};
int __init miccpt_pci_init(void)
{
if (machine_is_miccpt())
pci_common_init(&miccpt_pci);
return 0;
}
subsys_initcall(miccpt_pci_init);
arch/arm/mach-ixp4xx/omixp-setup.c 0 → 100644
View file @ f906fb1d
/*
* arch/arm/mach-ixp4xx/omixp-setup.c
*
* omicron ixp4xx board setup
* Copyright (C) 2009 OMICRON electronics GmbH
*
* based nslu2-setup.c, ixdp425-setup.c:
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#ifdef CONFIG_LEDS_CLASS
#include <linux/leds.h>
#endif
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
static struct resource omixp_flash_resources[] = {
{
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
},
};
static struct mtd_partition omixp_partitions[] = {
{
.name = "Recovery Bootloader",
.size = 0x00020000,
.offset = 0,
}, {
.name = "Calibration Data",
.size = 0x00020000,
.offset = 0x00020000,
}, {
.name = "Recovery FPGA",
.size = 0x00020000,
.offset = 0x00040000,
}, {
.name = "Release Bootloader",
.size = 0x00020000,
.offset = 0x00060000,
}, {
.name = "Release FPGA",
.size = 0x00020000,
.offset = 0x00080000,
}, {
.name = "Kernel",
.size = 0x00160000,
.offset = 0x000a0000,
}, {
.name = "Filesystem",
.size = 0x00C00000,
.offset = 0x00200000,
}, {
.name = "Persistent Storage",
.size = 0x00200000,
.offset = 0x00E00000,
},
};
static struct flash_platform_data omixp_flash_data[] = {
{
.map_name = "cfi_probe",
.parts = omixp_partitions,
.nr_parts = ARRAY_SIZE(omixp_partitions),
}, {
.map_name = "cfi_probe",
.parts = NULL,
.nr_parts = 0,
},
};
static struct platform_device omixp_flash_device[] = {
{
.name = "IXP4XX-Flash",
.id = 0,
.dev = {
.platform_data = &omixp_flash_data[0],
},
.resource = &omixp_flash_resources[0],
.num_resources = 1,
}, {
.name = "IXP4XX-Flash",
.id = 1,
.dev = {
.platform_data = &omixp_flash_data[1],
},
.resource = &omixp_flash_resources[1],
.num_resources = 1,
},
};
/* Swap UART's - These boards have the console on UART2. The following
* configuration is used:
* ttyS0 .. UART2
* ttyS1 .. UART1
* This way standard images can be used with the kernel that expect
* the console on ttyS0.
*/
static struct resource omixp_uart_resources[] = {
{
.start = IXP4XX_UART2_BASE_PHYS,
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
}, {
.start = IXP4XX_UART1_BASE_PHYS,
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
},
};
static struct plat_serial8250_port omixp_uart_data[] = {
{
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
}, {
.mapbase = IXP4XX_UART1_BASE_PHYS,
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
}, {
/* list termination */
}
};
static struct platform_device omixp_uart = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev.platform_data = omixp_uart_data,
.num_resources = 2,
.resource = omixp_uart_resources,
};
static struct gpio_led mic256_led_pins[] = {
{
.name = "LED-A",
.gpio = 7,
},
};
static struct gpio_led_platform_data mic256_led_data = {
.num_leds = ARRAY_SIZE(mic256_led_pins),
.leds = mic256_led_pins,
};
static struct platform_device mic256_leds = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &mic256_led_data,
};
/* Built-in 10/100 Ethernet MAC interfaces */
static struct eth_plat_info ixdp425_plat_eth[] = {
{
.phy = 0,
.rxq = 3,
.txreadyq = 20,
}, {
.phy = 1,
.rxq = 4,
.txreadyq = 21,
},
};
static struct platform_device ixdp425_eth[] = {
{
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = ixdp425_plat_eth,
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev.platform_data = ixdp425_plat_eth + 1,
},
};
static struct platform_device *devixp_pldev[] __initdata = {
&omixp_uart,
&omixp_flash_device[0],
&ixdp425_eth[0],
&ixdp425_eth[1],
};
static struct platform_device *mic256_pldev[] __initdata = {
&omixp_uart,
&omixp_flash_device[0],
&mic256_leds,
&ixdp425_eth[0],
&ixdp425_eth[1],
};
static struct platform_device *miccpt_pldev[] __initdata = {
&omixp_uart,
&omixp_flash_device[0],
&omixp_flash_device[1],
&ixdp425_eth[0],
&ixdp425_eth[1],
};
static void __init omixp_init(void)
{
ixp4xx_sys_init();
/* 16MiB Boot Flash */
omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0);
/* 32 MiB Data Flash */
omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2);
if (machine_is_devixp())
platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
else if (machine_is_miccpt())
platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
else if (machine_is_mic256())
platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
}
#ifdef CONFIG_MACH_DEVIXP
MACHINE_START(DEVIXP, "Omicron DEVIXP")
.atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_MICCPT
MACHINE_START(MICCPT, "Omicron MICCPT")
.atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
MACHINE_END
#endif
#ifdef CONFIG_MACH_MIC256
MACHINE_START(MIC256, "Omicron MIC256")
.atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
MACHINE_END
#endif
arch/arm/mach-mxs/Kconfig
View file @ f906fb1d
......@@ -64,8 +64,25 @@ config MODULE_TX28
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_PWM
config MODULE_M28
bool
select SOC_IMX28
select LEDS_GPIO_REGISTER
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_FLEXCAN
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
select MXS_OCOTP
config MACH_TX28
bool "Ka-Ro TX28 module"
select MODULE_TX28
config MACH_M28EVK
bool "Support DENX M28EVK Platform"
select MODULE_M28
endif
arch/arm/mach-mxs/Makefile
View file @ f906fb1d
......@@ -10,6 +10,7 @@ obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
obj-$(CONFIG_MACH_TX28) += mach-tx28.o
......
arch/arm/mach-mxs/clock-mx28.c
View file @ f906fb1d
......@@ -738,11 +738,17 @@ static int clk_misc_init(void)
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
/* Extra fec clock setting */
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
reg &= ~BM_CLKCTRL_ENET_SLEEP;
reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
/*
* Extra fec clock setting
* The DENX M28 uses an external clock source
* and the clock output must not be enabled
*/
if (!machine_is_m28evk()) {
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
reg &= ~BM_CLKCTRL_ENET_SLEEP;
reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
}
/*
* 480 MHz seems too high to be ssp clock source directly,
......
arch/arm/mach-mxs/include/mach/mxs.h
View file @ f906fb1d
......@@ -33,6 +33,7 @@
0)
#define cpu_is_mx28() ( \
machine_is_mx28evk() || \
machine_is_m28evk() || \
machine_is_tx28() || \
0)
......
arch/arm/mach-mxs/include/mach/uncompress.h
View file @ f906fb1d
......@@ -63,6 +63,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
mxs_duart_base = MX23_DUART_BASE_ADDR;
break;
case MACH_TYPE_MX28EVK:
case MACH_TYPE_M28EVK:
case MACH_TYPE_TX28:
mxs_duart_base = MX28_DUART_BASE_ADDR;
break;
......
arch/arm/mach-mxs/mach-m28evk.c 0 → 100644
View file @ f906fb1d
/*
* Copyright (C) 2011
* Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
*
* based on: mach-mx28_evk.c
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/iomux-mx28.h>
#include "devices-mx28.h"
#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16)
#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17)
#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28)
#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
static const iomux_cfg_t m28evk_pads[] __initconst = {
/* duart */
MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
/* auart0 */
MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
/* auart3 */
MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
/* fec0 */
MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
/* fec1 */
MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
/* flexcan0 */
MX28_PAD_GPMI_RDY2__CAN0_TX,
MX28_PAD_GPMI_RDY3__CAN0_RX,
/* flexcan1 */
MX28_PAD_GPMI_CE2N__CAN1_TX,
MX28_PAD_GPMI_CE3N__CAN1_RX,
/* I2C */
MX28_PAD_I2C0_SCL__I2C0_SCL,
MX28_PAD_I2C0_SDA__I2C0_SDA,
/* mxsfb (lcdif) */
MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
/* mmc0 */
MX28_PAD_SSP0_DATA0__SSP0_D0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA1__SSP0_D1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA2__SSP0_D2 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA3__SSP0_D3 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA4__SSP0_D4 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA5__SSP0_D5 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA6__SSP0_D6 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DATA7__SSP0_D7 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_CMD__SSP0_CMD |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX28_PAD_SSP0_SCK__SSP0_SCK |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* mmc1 */
MX28_PAD_GPMI_D00__SSP1_D0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_D01__SSP1_D1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_D02__SSP1_D2 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_D03__SSP1_D3 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_D04__SSP1_D4 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_D05__SSP1_D5 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_D06__SSP1_D6 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_D07__SSP1_D7 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_RDY1__SSP1_CMD |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_WRN__SSP1_SCK |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* write protect */
MX28_PAD_GPMI_RESETN__GPIO_0_28 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* slot power enable */
MX28_PAD_PWM4__GPIO_3_29 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* led */
MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
/* nand */
MX28_PAD_GPMI_D00__GPMI_D0 |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_D01__GPMI_D1 |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_D02__GPMI_D2 |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_D03__GPMI_D3 |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_D04__GPMI_D4 |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_D05__GPMI_D5 |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_D06__GPMI_D6 |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_D07__GPMI_D7 |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_CE0N__GPMI_CE0N |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_RDY0__GPMI_READY0 |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
MX28_PAD_GPMI_RDN__GPMI_RDN |
(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_WRN__GPMI_WRN |
(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_ALE__GPMI_ALE |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_CLE__GPMI_CLE |
(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
MX28_PAD_GPMI_RESETN__GPMI_RESETN |
(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
/* Backlight */
MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
};
/* led */
static const struct gpio_led m28evk_leds[] __initconst = {
{
.name = "user-led1",
.default_trigger = "heartbeat",
.gpio = M28EVK_GPIO_USERLED1,
},
{
.name = "user-led2",
.default_trigger = "heartbeat",
.gpio = M28EVK_GPIO_USERLED2,
},
};
static const struct gpio_led_platform_data m28evk_led_data __initconst = {
.leds = m28evk_leds,
.num_leds = ARRAY_SIZE(m28evk_leds),
};
static struct fec_platform_data mx28_fec_pdata[] __initdata = {
{
/* fec0 */
.phy = PHY_INTERFACE_MODE_RMII,
}, {
/* fec1 */
.phy = PHY_INTERFACE_MODE_RMII,
},
};
static int __init m28evk_fec_get_mac(void)
{
int i;
u32 val;
const u32 *ocotp = mxs_get_ocotp();
if (!ocotp) {
pr_err("%s: timeout when reading fec mac from OCOTP\n",
__func__);
return -ETIMEDOUT;
}
/*
* OCOTP only stores the last 4 octets for each mac address,
* so hard-code DENX OUI (C0:E5:4E) here.
*/
for (i = 0; i < 2; i++) {
val = ocotp[i * 4];
mx28_fec_pdata[i].mac[0] = 0xC0;
mx28_fec_pdata[i].mac[1] = 0xE5;
mx28_fec_pdata[i].mac[2] = 0x4E;
mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
}
return 0;
}
/* mxsfb (lcdif) */
static struct fb_videomode m28evk_video_modes[] = {
{
.name = "Ampire AM-800480R2TMQW-T01H",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 30066, /* picosecond (33.26 MHz) */
.left_margin = 0,
.right_margin = 256,
.upper_margin = 0,
.lower_margin = 45,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
},
};
static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
.mode_list = m28evk_video_modes,
.mode_count = ARRAY_SIZE(m28evk_video_modes),
.default_bpp = 16,
.ld_intf_width = STMLCDIF_18BIT,
};
static struct at24_platform_data m28evk_eeprom = {
.byte_len = 16384,
.page_size = 32,
.flags = AT24_FLAG_ADDR16,
};
static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
{
I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */
.platform_data = &m28evk_eeprom,
},
};
static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
{
/* mmc0 */
.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
.flags = SLOTF_8_BIT_CAPABLE,
}, {
/* mmc1 */
.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
.flags = SLOTF_8_BIT_CAPABLE,
},
};
static void __init m28evk_init(void)
{
mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
mx28_add_duart();
mx28_add_auart0();
mx28_add_auart3();
if (!m28evk_fec_get_mac()) {
mx28_add_fec(0, &mx28_fec_pdata[0]);
mx28_add_fec(1, &mx28_fec_pdata[1]);
}
mx28_add_flexcan(0, NULL);
mx28_add_flexcan(1, NULL);
mx28_add_mxsfb(&m28evk_mxsfb_pdata);
mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
gpio_led_register_device(0, &m28evk_led_data);
/* I2C */
mx28_add_mxs_i2c(0);
i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
}
static void __init m28evk_timer_init(void)
{
mx28_clocks_init();
}
static struct sys_timer m28evk_timer = {
.init = m28evk_timer_init,
};
MACHINE_START(M28EVK, "DENX M28 EVK")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
.init_machine = m28evk_init,
.timer = &m28evk_timer,
MACHINE_END
arch/arm/mach-s3c64xx/cpu.c
View file @ f906fb1d
......@@ -44,16 +44,16 @@ static const char name_s3c6410[] = "S3C6410";
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x36400000,
.idmask = 0xfffff000,
.idcode = S3C6400_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
.init_clocks = s3c6400_init_clocks,
.init_uarts = s3c6400_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
}, {
.idcode = 0x36410100,
.idmask = 0xffffff00,
.idcode = S3C6410_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
.init_clocks = s3c6410_init_clocks,
.init_uarts = s3c6410_init_uarts,
......@@ -141,23 +141,15 @@ void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
{
unsigned long idcode;
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
init_consistent_dma_size(SZ_8M);
idcode = __raw_readl(S3C_VA_SYS + 0x118);
if (!idcode) {
/* S3C6400 has the ID register in a different place,
* and needs a write before it can be read. */
__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
}
/* detect cpu id */
s3c64xx_init_cpu();
s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
static __init int s3c64xx_sysdev_init(void)
......
arch/arm/mach-s5p64x0/dev-spi.c
View file @ f906fb1d
......@@ -21,6 +21,7 @@
#include <mach/regs-clock.h>
#include <mach/spi-clocks.h>
#include <plat/cpu.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
......@@ -185,11 +186,8 @@ struct platform_device s5p64x0_device_spi1 = {
void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
unsigned int id;
struct s3c64xx_spi_info *pd;
id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0
|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
......@@ -199,7 +197,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
switch (cntrlr) {
case 0:
if (id == 0x50000)
if (soc_is_s5p6450())
pd = &s5p6450_spi0_pdata;
else
pd = &s5p6440_spi0_pdata;
......@@ -207,7 +205,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
s5p64x0_device_spi0.dev.platform_data = pd;
break;
case 1:
if (id == 0x50000)
if (soc_is_s5p6450())
pd = &s5p6450_spi1_pdata;
else
pd = &s5p6440_spi1_pdata;
......
arch/arm/mach-s5p64x0/dma.c
View file @ f906fb1d
......@@ -28,6 +28,7 @@
#include <mach/irqs.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/s3c-pl330-pdata.h>
......@@ -133,11 +134,7 @@ static struct platform_device s5p64x0_device_pdma = {
static int __init s5p64x0_dma_init(void)
{
unsigned int id;
id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
if (id == 0x50000)
if (soc_is_s5p6450())
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
......
arch/arm/mach-s5p64x0/gpiolib.c
View file @ f906fb1d
......@@ -19,6 +19,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
......@@ -473,14 +474,10 @@ static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
static int __init s5p64x0_gpiolib_init(void)
{
unsigned int chipid;
chipid = __raw_readl(S5P64X0_SYS_ID);
s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
ARRAY_SIZE(s5p64x0_gpio_cfgs));
if ((chipid & 0xff000) == 0x50000) {
if (soc_is_s5p6450()) {
samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
ARRAY_SIZE(s5p6450_gpio_2bit));
......
arch/arm/mach-s5p64x0/irq-eint.c
View file @ f906fb1d
......@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/gpio-cfg.h>
......@@ -67,7 +68,7 @@ static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
__raw_writel(ctrl, S5P64X0_EINT0CON0);
/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
if (soc_is_s5p6450())
s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
else
s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
......
arch/arm/mach-tegra/board-harmony.c
View file @ f906fb1d
......@@ -49,7 +49,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
.flags = UPF_BOOT_AUTOCONF,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
......@@ -117,6 +118,7 @@ static struct platform_device *harmony_devices[] __initdata = {
&tegra_sdhci_device1,
&tegra_sdhci_device2,
&tegra_sdhci_device4,
&tegra_ehci3_device,
&tegra_i2s_device1,
&tegra_das_device,
&tegra_pcm_device,
......@@ -140,6 +142,7 @@ static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
{ "pll_a_out0", "pll_a", 11289600, true },
{ "cdev1", NULL, 0, true },
{ "i2s1", "pll_a_out0", 11289600, false},
{ "usb3", "clk_m", 12000000, true },
{ NULL, NULL, 0, 0},
};
......
arch/arm/mach-tegra/board-paz00-pinmux.c
View file @ f906fb1d
......@@ -145,6 +145,9 @@ static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
{ .gpio = TEGRA_ULPI_RST, .enable = true },
{ .gpio = TEGRA_WIFI_PWRN, .enable = true },
{ .gpio = TEGRA_WIFI_RST, .enable = true },
{ .gpio = TEGRA_WIFI_LED, .enable = true },
};
void paz00_pinmux_init(void)
......
arch/arm/mach-tegra/board-paz00.c
View file @ f906fb1d
......@@ -26,6 +26,8 @@
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/rfkill-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -35,7 +37,6 @@
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
#include <mach/gpio.h>
#include "board.h"
#include "board-paz00.h"
......@@ -45,10 +46,22 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
/* serial port on JP1 */
.membase = IO_ADDRESS(TEGRA_UARTA_BASE),
.mapbase = TEGRA_UARTA_BASE,
.irq = INT_UARTA,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
}, {
/* serial port on mini-pcie */
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
.flags = UPF_BOOT_AUTOCONF,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
......@@ -65,10 +78,48 @@ static struct platform_device debug_uart = {
},
};
static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
.name = "wifi_rfkill",
.reset_gpio = TEGRA_WIFI_RST,
.shutdown_gpio = TEGRA_WIFI_PWRN,
.type = RFKILL_TYPE_WLAN,
};
static struct platform_device wifi_rfkill_device = {
.name = "rfkill_gpio",
.id = -1,
.dev = {
.platform_data = &wifi_rfkill_platform_data,
},
};
static struct gpio_led gpio_leds[] = {
{
.name = "wifi-led",
.default_trigger = "rfkill0",
.gpio = TEGRA_WIFI_LED,
},
};
static struct gpio_led_platform_data gpio_led_info = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct platform_device leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &gpio_led_info,
},
};
static struct platform_device *paz00_devices[] __initdata = {
&debug_uart,
&tegra_sdhci_device1,
&tegra_sdhci_device4,
&tegra_sdhci_device1,
&wifi_rfkill_device,
&leds_gpio,
};
static void paz00_i2c_init(void)
......@@ -94,7 +145,14 @@ static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline,
static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 216000000, true },
{ "uartd", "pll_p", 216000000, true },
{ "pll_p_out4", "pll_p", 24000000, true },
{ "usbd", "clk_m", 12000000, false },
{ "usb2", "clk_m", 12000000, false },
{ "usb3", "clk_m", 12000000, false },
{ NULL, NULL, 0, 0},
};
......
arch/arm/mach-tegra/board-paz00.h
View file @ f906fb1d
......@@ -19,11 +19,19 @@
#include <mach/gpio-tegra.h>
/* SDCARD */
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
/* ULPI */
#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
/* WIFI */
#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5
#define TEGRA_WIFI_RST TEGRA_GPIO_PD1
#define TEGRA_WIFI_LED TEGRA_GPIO_PD0
void paz00_pinmux_init(void);
#endif
arch/arm/mach-tegra/board-seaboard-pinmux.c
View file @ f906fb1d
......@@ -49,7 +49,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
......@@ -133,7 +133,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
......@@ -167,6 +167,8 @@ static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
{ .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
{ .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
{ .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
{ .gpio = TEGRA_GPIO_USB1, .enable = true },
};
void __init seaboard_pinmux_init(void)
......
arch/arm/mach-tegra/board-seaboard.c
View file @ f906fb1d
......@@ -25,9 +25,12 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <sound/wm8903.h>
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
#include <mach/tegra_wm8903_pdata.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -41,7 +44,8 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
/* Memory and IRQ filled in before registration */
.flags = UPF_BOOT_AUTOCONF,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
......@@ -62,6 +66,12 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = {
/* name parent rate enabled */
{ "uartb", "pll_p", 216000000, true},
{ "uartd", "pll_p", 216000000, true},
{ "pll_a", "pll_p_out1", 56448000, true },
{ "pll_a_out0", "pll_a", 11289600, true },
{ "cdev1", NULL, 0, true },
{ "i2s1", "pll_a_out0", 11289600, false},
{ "usbd", "clk_m", 12000000, true},
{ "usb3", "clk_m", 12000000, true},
{ NULL, NULL, 0, 0},
};
......@@ -117,6 +127,22 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = {
.is_8bit = 1,
};
static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
.gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
.gpio_hp_det = TEGRA_GPIO_HP_DET,
.gpio_hp_mute = -1,
.gpio_int_mic_en = -1,
.gpio_ext_mic_en = -1,
};
static struct platform_device seaboard_audio_device = {
.name = "tegra-snd-wm8903",
.id = 0,
.dev = {
.platform_data = &seaboard_audio_pdata,
},
};
static struct platform_device *seaboard_devices[] __initdata = {
&debug_uart,
&tegra_pmu_device,
......@@ -124,6 +150,10 @@ static struct platform_device *seaboard_devices[] __initdata = {
&tegra_sdhci_device3,
&tegra_sdhci_device1,
&seaboard_gpio_keys_device,
&tegra_i2s_device1,
&tegra_das_device,
&tegra_pcm_device,
&seaboard_audio_device,
};
static struct i2c_board_info __initdata isl29018_device = {
......@@ -135,12 +165,56 @@ static struct i2c_board_info __initdata adt7461_device = {
I2C_BOARD_INFO("adt7461", 0x4c),
};
static struct wm8903_platform_data wm8903_pdata = {
.irq_active_low = 0,
.micdet_cfg = 0,
.micdet_delay = 100,
.gpio_base = SEABOARD_GPIO_WM8903(0),
.gpio_cfg = {
WM8903_GPIO_NO_CONFIG,
WM8903_GPIO_NO_CONFIG,
0,
WM8903_GPIO_NO_CONFIG,
WM8903_GPIO_NO_CONFIG,
},
};
static struct i2c_board_info __initdata wm8903_device = {
I2C_BOARD_INFO("wm8903", 0x1a),
.platform_data = &wm8903_pdata,
.irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
};
static int seaboard_ehci_init(void)
{
int gpio_status;
gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
if (gpio_status < 0) {
pr_err("VBUS_USB1 request GPIO FAILED\n");
WARN_ON(1);
}
gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
if (gpio_status < 0) {
pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
WARN_ON(1);
}
gpio_set_value(TEGRA_GPIO_USB1, 1);
platform_device_register(&tegra_ehci1_device);
platform_device_register(&tegra_ehci3_device);
return 0;
}
static void __init seaboard_i2c_init(void)
{
gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
i2c_register_board_info(0, &isl29018_device, 1);
i2c_register_board_info(0, &wm8903_device, 1);
i2c_register_board_info(3, &adt7461_device, 1);
......@@ -161,6 +235,8 @@ static void __init seaboard_common_init(void)
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
seaboard_ehci_init();
}
static void __init tegra_seaboard_init(void)
......@@ -182,6 +258,9 @@ static void __init tegra_kaen_init(void)
debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
debug_uart_platform_data[0].irq = INT_UARTB;
seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
seaboard_common_init();
seaboard_i2c_init();
......
arch/arm/mach-tegra/board-seaboard.h
View file @ f906fb1d
......@@ -19,6 +19,9 @@
#include <mach/gpio-tegra.h>
#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_))
#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
......@@ -33,10 +36,11 @@
#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5
#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2
#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3
#define TPS_GPIO_BASE TEGRA_NR_GPIOS
#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2)
#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2)
#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2)
#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1
#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5
void seaboard_pinmux_init(void);
......
arch/arm/mach-tegra/board-trimslice.c
View file @ f906fb1d
......@@ -32,7 +32,6 @@
#include <mach/iomap.h>
#include <mach/sdhci.h>
#include <mach/gpio.h>
#include "board.h"
#include "clock.h"
......@@ -46,7 +45,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
.membase = IO_ADDRESS(TEGRA_UARTA_BASE),
.mapbase = TEGRA_UARTA_BASE,
.irq = INT_UARTA,
.flags = UPF_BOOT_AUTOCONF,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
......
arch/arm/plat-s3c24xx/cpu.c
View file @ f906fb1d
......@@ -215,19 +215,18 @@ static void s3c24xx_pm_restart(char mode, const char *cmd)
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
unsigned long idcode = 0x0;
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
idcode = s3c24xx_read_idcode_v5();
samsung_cpu_id = s3c24xx_read_idcode_v5();
} else {
idcode = s3c24xx_read_idcode_v4();
samsung_cpu_id = s3c24xx_read_idcode_v4();
}
s3c24xx_init_cpu();
arm_pm_restart = s3c24xx_pm_restart;
s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
arch/arm/plat-s5p/cpu.c
View file @ f906fb1d
......@@ -33,48 +33,66 @@ static const char name_s5p6450[] = "S5P6450";
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x56440100,
.idmask = 0xfffff000,
.idcode = S5P6440_CPU_ID,
.idmask = S5P64XX_CPU_MASK,
.map_io = s5p6440_map_io,
.init_clocks = s5p6440_init_clocks,
.init_uarts = s5p6440_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6440,
}, {
.idcode = 0x36450000,
.idmask = 0xfffff000,
.idcode = S5P6450_CPU_ID,
.idmask = S5P64XX_CPU_MASK,
.map_io = s5p6450_map_io,
.init_clocks = s5p6450_init_clocks,
.init_uarts = s5p6450_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6450,
}, {
.idcode = 0x43100000,
.idmask = 0xfffff000,
.idcode = S5PC100_CPU_ID,
.idmask = S5PC100_CPU_MASK,
.map_io = s5pc100_map_io,
.init_clocks = s5pc100_init_clocks,
.init_uarts = s5pc100_init_uarts,
.init = s5pc100_init,
.name = name_s5pc100,
}, {
.idcode = 0x43110000,
.idmask = 0xfffff000,
.idcode = S5PV210_CPU_ID,
.idmask = S5PV210_CPU_MASK,
.map_io = s5pv210_map_io,
.init_clocks = s5pv210_init_clocks,
.init_uarts = s5pv210_init_uarts,
.init = s5pv210_init,
.name = name_s5pv210,
}, {
.idcode = 0x43210000,
.idmask = 0xfffe0000,
.idcode = EXYNOS4210_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos4_init,
.name = name_exynos4210,
}, {
.idcode = EXYNOS4212_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos4_init,
.name = name_exynos4212,
}, {
.idcode = EXYNOS4412_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos4_init,
.name = name_exynos4412,
},
};
......@@ -114,13 +132,13 @@ static struct map_desc s5p_iodesc[] __initdata = {
void __init s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr)
{
unsigned long idcode;
/* initialize the io descriptors we need for initialization */
iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
if (mach_desc)
iotable_init(mach_desc, size);
idcode = __raw_readl(cpuid_addr);
s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
/* detect cpu id and rev. */
s5p_init_cpu(cpuid_addr);
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
arch/arm/plat-s5p/include/plat/exynos4.h
View file @ f906fb1d
......@@ -14,10 +14,11 @@
extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void exynos4_register_clocks(void);
extern void exynos4210_register_clocks(void);
extern void exynos4212_register_clocks(void);
extern void exynos4_setup_clocks(void);
#ifdef CONFIG_CPU_EXYNOS4210
#ifdef CONFIG_ARCH_EXYNOS4
extern int exynos4_init(void);
extern void exynos4_init_irq(void);
extern void exynos4_map_io(void);
......
arch/arm/plat-s5p/include/plat/pll.h
View file @ f906fb1d
......@@ -12,6 +12,59 @@
* published by the Free Software Foundation.
*/
#include <asm/div64.h>
#define PLL35XX_MDIV_MASK (0x3FF)
#define PLL35XX_PDIV_MASK (0x3F)
#define PLL35XX_SDIV_MASK (0x7)
#define PLL35XX_MDIV_SHIFT (16)
#define PLL35XX_PDIV_SHIFT (8)
#define PLL35XX_SDIV_SHIFT (0)
static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
{
u32 mdiv, pdiv, sdiv;
u64 fvco = baseclk;
mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
fvco *= mdiv;
do_div(fvco, (pdiv << sdiv));
return (unsigned long)fvco;
}
#define PLL36XX_KDIV_MASK (0xFFFF)
#define PLL36XX_MDIV_MASK (0x1FF)
#define PLL36XX_PDIV_MASK (0x3F)
#define PLL36XX_SDIV_MASK (0x7)
#define PLL36XX_MDIV_SHIFT (16)
#define PLL36XX_PDIV_SHIFT (8)
#define PLL36XX_SDIV_SHIFT (0)
static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
u32 pll_con0, u32 pll_con1)
{
unsigned long result;
u32 mdiv, pdiv, sdiv, kdiv;
u64 tmp;
mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
kdiv = pll_con1 & PLL36XX_KDIV_MASK;
tmp = baseclk;
tmp *= (mdiv << 16) + kdiv;
do_div(tmp, (pdiv << sdiv));
result = tmp >> 16;
return result;
}
#define PLL45XX_MDIV_MASK (0x3FF)
#define PLL45XX_PDIV_MASK (0x3F)
#define PLL45XX_SDIV_MASK (0x7)
......@@ -19,8 +72,6 @@
#define PLL45XX_PDIV_SHIFT (8)
#define PLL45XX_SDIV_SHIFT (0)
#include <asm/div64.h>
enum pll45xx_type_t {
pll_4500,
pll_4502,
......
arch/arm/plat-samsung/Makefile
View file @ f906fb1d
......@@ -11,7 +11,7 @@ obj- :=
# Objects we always build independent of SoC choice
obj-y += init.o
obj-y += init.o cpu.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
......
arch/arm/plat-samsung/cpu.c 0 → 100644
View file @ f906fb1d
/* linux/arch/arm/plat-samsung/cpu.c
*
* Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung CPU Support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/system.h>
#include <mach/map.h>
#include <plat/cpu.h>
unsigned long samsung_cpu_id;
static unsigned int samsung_cpu_rev;
unsigned int samsung_rev(void)
{
return samsung_cpu_rev;
}
EXPORT_SYMBOL(samsung_rev);
void __init s3c24xx_init_cpu(void)
{
/* nothing here yet */
samsung_cpu_rev = 0;
}
void __init s3c64xx_init_cpu(void)
{
samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
if (!samsung_cpu_id) {
/*
* S3C6400 has the ID register in a different place,
* and needs a write before it can be read.
*/
__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
}
samsung_cpu_rev = 0;
}
void __init s5p_init_cpu(void __iomem *cpuid_addr)
{
samsung_cpu_id = __raw_readl(cpuid_addr);
samsung_cpu_rev = samsung_cpu_id & 0xFF;
}
arch/arm/plat-samsung/include/plat/cpu.h
View file @ f906fb1d
/* linux/arch/arm/plat-samsung/include/plat/cpu.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Header file for S3C24XX CPU support
* Header file for Samsung CPU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -15,6 +18,108 @@
#ifndef __SAMSUNG_PLAT_CPU_H
#define __SAMSUNG_PLAT_CPU_H
extern unsigned long samsung_cpu_id;
#define S3C24XX_CPU_ID 0x32400000
#define S3C24XX_CPU_MASK 0xFFF00000
#define S3C6400_CPU_ID 0x36400000
#define S3C6410_CPU_ID 0x36410000
#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID)
#define S3C64XX_CPU_MASK 0xFFFFF000
#define S5P6440_CPU_ID 0x56440000
#define S5P6450_CPU_ID 0x36450000
#define S5P64XX_CPU_MASK 0xFFFFF000
#define S5PC100_CPU_ID 0x43100000
#define S5PC100_CPU_MASK 0xFFFFF000
#define S5PV210_CPU_ID 0x43110000
#define S5PV210_CPU_MASK 0xFFFFF000
#define EXYNOS4210_CPU_ID 0x43210000
#define EXYNOS4212_CPU_ID 0x43220000
#define EXYNOS4412_CPU_ID 0xE4412200
#define EXYNOS4_CPU_MASK 0xFFFE0000
#define IS_SAMSUNG_CPU(name, id, mask) \
static inline int is_samsung_##name(void) \
{ \
return ((samsung_cpu_id & mask) == (id & mask)); \
}
IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
defined(CONFIG_CPU_S3C2443)
# define soc_is_s3c24xx() is_samsung_s3c24xx()
#else
# define soc_is_s3c24xx() 0
#endif
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
# define soc_is_s3c64xx() is_samsung_s3c64xx()
#else
# define soc_is_s3c64xx() 0
#endif
#if defined(CONFIG_CPU_S5P6440)
# define soc_is_s5p6440() is_samsung_s5p6440()
#else
# define soc_is_s5p6440() 0
#endif
#if defined(CONFIG_CPU_S5P6450)
# define soc_is_s5p6450() is_samsung_s5p6450()
#else
# define soc_is_s5p6450() 0
#endif
#if defined(CONFIG_CPU_S5PC100)
# define soc_is_s5pc100() is_samsung_s5pc100()
#else
# define soc_is_s5pc100() 0
#endif
#if defined(CONFIG_CPU_S5PV210)
# define soc_is_s5pv210() is_samsung_s5pv210()
#else
# define soc_is_s5pv210() 0
#endif
#if defined(CONFIG_CPU_EXYNOS4210)
# define soc_is_exynos4210() is_samsung_exynos4210()
#else
# define soc_is_exynos4210() 0
#endif
#if defined(CONFIG_SOC_EXYNOS4212)
# define soc_is_exynos4212() is_samsung_exynos4212()
#else
# define soc_is_exynos4212() 0
#endif
#if defined(CONFIG_SOC_EXYNOS4412)
# define soc_is_exynos4412() is_samsung_exynos4412()
#else
# define soc_is_exynos4412() 0
#endif
#define EXYNOS4210_REV_0 (0x0)
#define EXYNOS4210_REV_1_0 (0x10)
#define EXYNOS4210_REV_1_1 (0x11)
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
......@@ -55,6 +160,12 @@ extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
extern void s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr);
extern void s3c24xx_init_cpu(void);
extern void s3c64xx_init_cpu(void);
extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c24xx_init_clocks(int xtal);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7