Commit f9097dce authored by Komuro's avatar Komuro Committed by Dominik Brodowski

pcmcia: remove irq_list parameter from pd6729

Remoe the irq_list parameter from pd6729, as it can and should be set
via sysfs (and -- if available -- pcmciautils, which reads the information
from /etc/pcmcia/config.opts )

[linux@dominikbrodowski.net: updated commit message]
Signed-off-by: default avatarKomuro <komurojun-mbn@nifty.com>
Signed-off-by: default avatarDominik Brodowski <linux@dominikbrodowski.net>
parent f3d4ae43
......@@ -48,23 +48,13 @@ MODULE_AUTHOR("Jun Komuro <komurojun-mbn@nifty.com>");
* Specifies the interrupt delivery mode. The default (1) is to use PCI
* interrupts; a value of 0 selects ISA interrupts. This must be set for
* correct operation of PCI card readers.
*
* irq_list=i,j,...
* This list limits the set of interrupts that can be used by PCMCIA
* cards.
* The default list is 3,4,5,7,9,10,11.
* (irq_list parameter is not used, if irq_mode = 1)
*/
static int irq_mode = 1; /* 0 = ISA interrupt, 1 = PCI interrupt */
static int irq_list[16];
static unsigned int irq_list_count = 0;
module_param(irq_mode, int, 0444);
module_param_array(irq_list, int, &irq_list_count, 0444);
MODULE_PARM_DESC(irq_mode,
"interrupt delivery mode. 0 = ISA, 1 = PCI. default is 1");
MODULE_PARM_DESC(irq_list, "interrupts that can be used by PCMCIA cards");
static DEFINE_SPINLOCK(port_lock);
......@@ -605,13 +595,7 @@ static u_int __devinit pd6729_isa_scan(void)
return 0;
}
if (irq_list_count == 0)
mask0 = 0xffff;
else
for (i = mask0 = 0; i < irq_list_count; i++)
mask0 |= (1<<irq_list[i]);
mask0 &= PD67_MASK;
mask0 = PD67_MASK;
/* just find interrupts that aren't in use */
for (i = 0; i < 16; i++)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment