Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Arnd Bergmann:
 "This is some material that we picked up into our tree late or that had
  complex inter-depondencies. The fact that there are these
  interdependencies tends to meant that these are often actually the
  most interesting new additions:

   - The new Aspeed AST2600 baseboard management controller is added,
     this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
     had some dependencies on other device drivers.

   - After many years, support for the MMP2 based OLPC XO-1.75 finally
     makes it into the kernel.

   - The Armada 3720 based Turris Mox open source router platform is a
     late addition and it follows some preparatory work across multiple
     branches.

   - The OMAP2+ platform had some large-scale cleanup involving driver
     changes and DT changes, here we finish it off, dropping a lot of
     the now-unused platform data.

   - The TI K3 platform that got added for 5.3 gains a lot more support
     for individual bits on the SoC, this part just came late for the
     merge window"

[ This pull request itself wasn't actually sent late at all by Arnd, but
  I waited on the branches that it used to be pulled first, so it ends
  up being merged much later than the other ARM SoC pull requests this
  merge window     - Linus ]

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  ARM: dts: dir685: Drop spi-cpol from the display
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  ARM: exynos: Enable support for ARM architected timers
  ARM: samsung: Fix system restart on S3C6410
  ARM: dts: mmp2: add OLPC XO 1.75 machine
  ARM: dts: mmp2: rename the USB PHY node
  ARM: dts: mmp2: specify reg-shift for the UARTs
  ARM: dts: mmp2: add camera interfaces
  ARM: dts: mmp2: fix the SPI nodes
  ARM: dts: mmp2: trivial whitespace fix
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-j721e-main: Add hwspinlock node
  arm64: dts: ti: k3-am65-main: Add hwspinlock node
  arm64: dts: k3-j721e: Add gpio-keys on common processor board
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
  ...

Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt

@@ -48,3 +48,11 @@ avs: avs@11500 {
 	compatible = "marvell,armada-3700-avs", "syscon";
 	reg = <0x11500 0x40>;
 }
+
+
+CZ.NIC's Turris Mox SOHO router Device Tree Bindings
+----------------------------------------------------
+
+Required root node property:
+
+ - compatible: must contain "cznic,turris-mox"

MAINTAINERS

@@ -11867,6 +11867,7 @@ S:	Maintained
 F:	arch/arm/mach-omap2/
 F:	arch/arm/plat-omap/
 F:	arch/arm/configs/omap2plus_defconfig
+F:	drivers/bus/ti-sysc.c
 F:	drivers/i2c/busses/i2c-omap.c
 F:	drivers/irqchip/irq-omap-intc.c
 F:	drivers/mfd/*omap*.c
@@ -11887,6 +11888,7 @@ F:	drivers/regulator/tps65910-regulator.c
 F:	drivers/regulator/twl-regulator.c
 F:	drivers/regulator/twl6030-regulator.c
 F:	include/linux/platform_data/i2c-omap.h
+F:	include/linux/platform_data/ti-sysc.h
 
 ONION OMEGA2+ BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>

arch/arm/boot/dts/Makefile

@@ -336,7 +336,8 @@ dtb-$(CONFIG_MACH_MESON8) += \
 dtb-$(CONFIG_ARCH_MMP) += \
 	pxa168-aspenite.dtb \
 	pxa910-dkb.dtb \
-	mmp2-brownstone.dtb
+	mmp2-brownstone.dtb \
+	mmp2-olpc-xo-1-75.dtb
 dtb-$(CONFIG_ARCH_MPS2) += \
 	mps2-an385.dtb \
 	mps2-an399.dtb
@@ -1278,6 +1279,7 @@ dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb.dtb \
 	aspeed-bmc-arm-centriq2400-rep.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-facebook-cmm.dtb \

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -673,7 +673,6 @@ segment@0 {					/* 0x4a000000 */
 
 		target-module@100000 {			/* 0x4a100000, ap 3 08.0 */
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			ti,hwmods = "cpgmac0";
 			reg = <0x101200 0x4>,
 			      <0x101208 0x4>,
 			      <0x101204 0x4>;
@@ -719,9 +718,10 @@ mac: ethernet@0 {
 
 				davinci_mdio: mdio@1000 {
 					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+					clock-names = "fck";
 					#address-cells = <1>;
 					#size-cells = <0>;
-					ti,hwmods = "davinci_mdio";
 					bus_freq = <1000000>;
 					reg = <0x1000 0x100>;
 					status = "disabled";

arch/arm/boot/dts/am3517.dtsi

@@ -88,6 +88,30 @@ hecc: can@5c050000 {
 			interrupts = <24>;
 			clocks = <&hecc_ck>;
 		};
+
+		/*
+		 * On am3517 the OCP registers do not seem to be accessible
+		 * similar to the omap34xx. Maybe SGX is permanently set to
+		 * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
+		 * write-only at 0x50000e10. We detect SGX based on the SGX
+		 * revision register instead of the unreadable OCP revision
+		 * register.
+		 */
+		sgx_module: target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000014 0x4>;
+			reg-names = "rev";
+			clocks = <&sgx_fck>, <&sgx_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
 	};
 };
 

arch/arm/boot/dts/am437x-l4.dtsi

@@ -512,7 +512,6 @@ segment@0 {					/* 0x4a000000 */
 
 		target-module@100000 {			/* 0x4a100000, ap 3 04.0 */
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			ti,hwmods = "cpgmac0";
 			reg = <0x101200 0x4>,
 			      <0x101208 0x4>,
 			      <0x101204 0x4>;
@@ -559,11 +558,10 @@ GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
 				davinci_mdio: mdio@1000 {
 					compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
 					reg = <0x1000 0x100>;
+					clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+					clock-names = "fck";
 					#address-cells = <1>;
 					#size-cells = <0>;
-					clocks = <&cpsw_125mhz_gclk>;
-					clock-names = "fck";
-					ti,hwmods = "davinci_mdio";
 					bus_freq = <1000000>;
 					status = "disabled";
 				};

arch/arm/boot/dts/aspeed-ast2600-evb.dts

+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "AST2600 EVB";
+	compatible = "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+};
+
+&emmc {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};

arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi

+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+&pinctrl {
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_espialt_default: espialt_default {
+		function = "ESPIALT";
+		groups = "ESPIALT";
+	};
+
+	pinctrl_fsi1_default: fsi1_default {
+		function = "FSI1";
+		groups = "FSI1";
+	};
+
+	pinctrl_fsi2_default: fsi2_default {
+		function = "FSI2";
+		groups = "FSI2";
+	};
+
+	pinctrl_fwspiabr_default: fwspiabr_default {
+		function = "FWSPIABR";
+		groups = "FWSPIABR";
+	};
+
+	pinctrl_fwspid_default: fwspid_default {
+		function = "FWSPID";
+		groups = "FWSPID";
+	};
+
+	pinctrl_fwqspid_default: fwqspid_default {
+		function = "FWQSPID";
+		groups = "FWQSPID";
+	};
+
+	pinctrl_fwspiwp_default: fwspiwp_default {
+		function = "FWSPIWP";
+		groups = "FWSPIWP";
+	};
+
+	pinctrl_gpit0_default: gpit0_default {
+		function = "GPIT0";
+		groups = "GPIT0";
+	};
+
+	pinctrl_gpit1_default: gpit1_default {
+		function = "GPIT1";
+		groups = "GPIT1";
+	};
+
+	pinctrl_gpit2_default: gpit2_default {
+		function = "GPIT2";
+		groups = "GPIT2";
+	};
+
+	pinctrl_gpit3_default: gpit3_default {
+		function = "GPIT3";
+		groups = "GPIT3";
+	};
+
+	pinctrl_gpit4_default: gpit4_default {
+		function = "GPIT4";
+		groups = "GPIT4";
+	};
+
+	pinctrl_gpit5_default: gpit5_default {
+		function = "GPIT5";
+		groups = "GPIT5";
+	};
+
+	pinctrl_gpit6_default: gpit6_default {
+		function = "GPIT6";
+		groups = "GPIT6";
+	};
+
+	pinctrl_gpit7_default: gpit7_default {
+		function = "GPIT7";
+		groups = "GPIT7";
+	};
+
+	pinctrl_gpiu0_default: gpiu0_default {
+		function = "GPIU0";
+		groups = "GPIU0";
+	};
+
+	pinctrl_gpiu1_default: gpiu1_default {
+		function = "GPIU1";
+		groups = "GPIU1";
+	};
+
+	pinctrl_gpiu2_default: gpiu2_default {
+		function = "GPIU2";
+		groups = "GPIU2";
+	};
+
+	pinctrl_gpiu3_default: gpiu3_default {
+		function = "GPIU3";
+		groups = "GPIU3";
+	};
+
+	pinctrl_gpiu4_default: gpiu4_default {
+		function = "GPIU4";
+		groups = "GPIU4";
+	};
+
+	pinctrl_gpiu5_default: gpiu5_default {
+		function = "GPIU5";
+		groups = "GPIU5";
+	};
+
+	pinctrl_gpiu6_default: gpiu6_default {
+		function = "GPIU6";
+		groups = "GPIU6";
+	};
+
+	pinctrl_gpiu7_default: gpiu7_default {
+		function = "GPIU7";
+		groups = "GPIU7";
+	};
+
+	pinctrl_hvi3c3_default: hvi3c3_default {
+		function = "HVI3C3";
+		groups = "HVI3C3";
+	};
+
+	pinctrl_hvi3c4_default: hvi3c4_default {
+		function = "HVI3C4";
+		groups = "HVI3C4";
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		function = "I2C1";
+		groups = "I2C1";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c15_default: i2c15_default {
+		function = "I2C15";
+		groups = "I2C15";
+	};
+
+	pinctrl_i2c16_default: i2c16_default {
+		function = "I2C16";
+		groups = "I2C16";
+	};
+
+	pinctrl_i2c2_default: i2c2_default {
+		function = "I2C2";
+		groups = "I2C2";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_i3c3_default: i3c3_default {
+		function = "I3C3";
+		groups = "I3C3";
+	};
+
+	pinctrl_i3c4_default: i3c4_default {
+		function = "I3C4";
+		groups = "I3C4";
+	};
+
+	pinctrl_i3c5_default: i3c5_default {
+		function = "I3C5";
+		groups = "I3C5";
+	};
+
+	pinctrl_i3c6_default: i3c6_default {
+		function = "I3C6";
+		groups = "I3C6";
+	};
+
+	pinctrl_jtagm_default: jtagm_default {
+		function = "JTAGM";
+		groups = "JTAGM";
+	};
+
+	pinctrl_lhpd_default: lhpd_default {
+		function = "LHPD";
+		groups = "LHPD";
+	};
+
+	pinctrl_lhsirq_default: lhsirq_default {
+		function = "LHSIRQ";
+		groups = "LHSIRQ";
+	};
+
+	pinctrl_lpc_default: lpc_default {
+		function = "LPC";
+		groups = "LPC";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_maclink1_default: maclink1_default {
+		function = "MACLINK1";
+		groups = "MACLINK1";
+	};
+
+	pinctrl_maclink2_default: maclink2_default {
+		function = "MACLINK2";
+		groups = "MACLINK2";
+	};
+
+	pinctrl_maclink3_default: maclink3_default {
+		function = "MACLINK3";
+		groups = "MACLINK3";
+	};
+
+	pinctrl_maclink4_default: maclink4_default {
+		function = "MACLINK4";
+		groups = "MACLINK4";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_mdio3_default: mdio3_default {
+		function = "MDIO3";
+		groups = "MDIO3";
+	};
+
+	pinctrl_mdio4_default: mdio4_default {
+		function = "MDIO4";
+		groups = "MDIO4";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm10g0_default: pwm10g0_default {
+		function = "PWM10";
+		groups = "PWM10G0";
+	};
+
+	pinctrl_pwm10g1_default: pwm10g1_default {
+		function = "PWM10";
+		groups = "PWM10G1";
+	};
+
+	pinctrl_pwm11g0_default: pwm11g0_default {
+		function = "PWM11";
+		groups = "PWM11G0";
+	};
+
+	pinctrl_pwm11g1_default: pwm11g1_default {
+		function = "PWM11";
+		groups = "PWM11G1";
+	};
+
+	pinctrl_pwm12g0_default: pwm12g0_default {
+		function = "PWM12";
+		groups = "PWM12G0";
+	};
+
+	pinctrl_pwm12g1_default: pwm12g1_default {
+		function = "PWM12";
+		groups = "PWM12G1";
+	};
+
+	pinctrl_pwm13g0_default: pwm13g0_default {
+		function = "PWM13";
+		groups = "PWM13G0";
+	};
+
+	pinctrl_pwm13g1_default: pwm13g1_default {
+		function = "PWM13";
+		groups = "PWM13G1";
+	};
+
+	pinctrl_pwm14g0_default: pwm14g0_default {
+		function = "PWM14";
+		groups = "PWM14G0";
+	};
+
+	pinctrl_pwm14g1_default: pwm14g1_default {
+		function = "PWM14";
+		groups = "PWM14G1";
+	};
+
+	pinctrl_pwm15g0_default: pwm15g0_default {
+		function = "PWM15";
+		groups = "PWM15G0";
+	};
+
+	pinctrl_pwm15g1_default: pwm15g1_default {
+		function = "PWM15";
+		groups = "PWM15G1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_pwm8g0_default: pwm8g0_default {
+		function = "PWM8";
+		groups = "PWM8G0";
+	};
+
+	pinctrl_pwm8g1_default: pwm8g1_default {
+		function = "PWM8";
+		groups = "PWM8G1";
+	};
+
+	pinctrl_pwm9g0_default: pwm9g0_default {
+		function = "PWM9";
+		groups = "PWM9G0";
+	};
+
+	pinctrl_pwm9g1_default: pwm9g1_default {
+		function = "PWM9";
+		groups = "PWM9G1";
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		function = "QSPI1";
+		groups = "QSPI1";
+	};
+
+	pinctrl_qspi2_default: qspi2_default {
+		function = "QSPI2";
+		groups = "QSPI2";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rgmii3_default: rgmii3_default {
+		function = "RGMII3";
+		groups = "RGMII3";
+	};
+
+	pinctrl_rgmii4_default: rgmii4_default {
+		function = "RGMII4";
+		groups = "RGMII4";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rmii3_default: rmii3_default {
+		function = "RMII3";
+		groups = "RMII3";
+	};
+
+	pinctrl_rmii4_default: rmii4_default {
+		function = "RMII4";
+		groups = "RMII4";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10g0_default: salt10g0_default {
+		function = "SALT10";
+		groups = "SALT10G0";
+	};
+
+	pinctrl_salt10g1_default: salt10g1_default {
+		function = "SALT10";
+		groups = "SALT10G1";
+	};
+
+	pinctrl_salt11g0_default: salt11g0_default {
+		function = "SALT11";
+		groups = "SALT11G0";
+	};
+
+	pinctrl_salt11g1_default: salt11g1_default {
+		function = "SALT11";
+		groups = "SALT11G1";
+	};
+
+	pinctrl_salt12g0_default: salt12g0_default {
+		function = "SALT12";
+		groups = "SALT12G0";
+	};
+
+	pinctrl_salt12g1_default: salt12g1_default {
+		function = "SALT12";
+		groups = "SALT12G1";
+	};
+
+	pinctrl_salt13g0_default: salt13g0_default {
+		function = "SALT13";
+		groups = "SALT13G0";
+	};
+
+	pinctrl_salt13g1_default: salt13g1_default {
+		function = "SALT13";
+		groups = "SALT13G1";
+	};
+
+	pinctrl_salt14g0_default: salt14g0_default {
+		function = "SALT14";
+		groups = "SALT14G0";
+	};
+
+	pinctrl_salt14g1_default: salt14g1_default {
+		function = "SALT14";
+		groups = "SALT14G1";
+	};
+
+	pinctrl_salt15g0_default: salt15g0_default {
+		function = "SALT15";
+		groups = "SALT15G0";
+	};
+
+	pinctrl_salt15g1_default: salt15g1_default {
+		function = "SALT15";
+		groups = "SALT15G1";
+	};
+
+	pinctrl_salt16g0_default: salt16g0_default {
+		function = "SALT16";
+		groups = "SALT16G0";
+	};
+
+	pinctrl_salt16g1_default: salt16g1_default {
+		function = "SALT16";
+		groups = "SALT16G1";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9g0_default: salt9g0_default {
+		function = "SALT9";
+		groups = "SALT9G0";
+	};
+
+	pinctrl_salt9g1_default: salt9g1_default {
+		function = "SALT9";
+		groups = "SALT9G1";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sd3_default: sd3_default {
+		function = "SD3";
+		groups = "SD3";
+	};
+
+	pinctrl_emmc_default: emmc_default {
+		function = "SD3";
+		groups = "EMMC";
+	};
+
+	pinctrl_sgpm1_default: sgpm1_default {
+		function = "SGPM1";
+		groups = "SGPM1";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1abr_default: spi1abr_default {
+		function = "SPI1ABR";
+		groups = "SPI1ABR";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1wp_default: spi1wp_default {
+		function = "SPI1WP";
+		groups = "SPI1WP";
+	};
+
+	pinctrl_spi2_default: spi2_default {
+		function = "SPI2";
+		groups = "SPI2";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2cs2_default: spi2cs2_default {
+		function = "SPI2CS2";
+		groups = "SPI2CS2";
+	};
+
+	pinctrl_tach0_default: tach0_default {
+		function = "TACH0";
+		groups = "TACH0";
+	};
+
+	pinctrl_tach1_default: tach1_default {
+		function = "TACH1";
+		groups = "TACH1";
+	};
+
+	pinctrl_tach10_default: tach10_default {
+		function = "TACH10";
+		groups = "TACH10";
+	};
+
+	pinctrl_tach11_default: tach11_default {
+		function = "TACH11";
+		groups = "TACH11";
+	};
+
+	pinctrl_tach12_default: tach12_default {
+		function = "TACH12";
+		groups = "TACH12";
+	};
+
+	pinctrl_tach13_default: tach13_default {
+		function = "TACH13";
+		groups = "TACH13";
+	};
+
+	pinctrl_tach14_default: tach14_default {
+		function = "TACH14";
+		groups = "TACH14";
+	};
+
+	pinctrl_tach15_default: tach15_default {
+		function = "TACH15";
+		groups = "TACH15";
+	};
+
+	pinctrl_tach2_default: tach2_default {
+		function = "TACH2";
+		groups = "TACH2";
+	};
+
+	pinctrl_tach3_default: tach3_default {
+		function = "TACH3";
+		groups = "TACH3";
+	};
+
+	pinctrl_tach4_default: tach4_default {
+		function = "TACH4";
+		groups = "TACH4";
+	};
+
+	pinctrl_tach5_default: tach5_default {
+		function = "TACH5";
+		groups = "TACH5";
+	};
+
+	pinctrl_tach6_default: tach6_default {
+		function = "TACH6";
+		groups = "TACH6";
+	};
+
+	pinctrl_tach7_default: tach7_default {
+		function = "TACH7";
+		groups = "TACH7";
+	};
+
+	pinctrl_tach8_default: tach8_default {
+		function = "TACH8";
+		groups = "TACH8";
+	};
+
+	pinctrl_tach9_default: tach9_default {
+		function = "TACH9";
+		groups = "TACH9";
+	};
+
+	pinctrl_thru0_default: thru0_default {
+		function = "THRU0";
+		groups = "THRU0";
+	};
+
+	pinctrl_thru1_default: thru1_default {
+		function = "THRU1";
+		groups = "THRU1";
+	};
+
+	pinctrl_thru2_default: thru2_default {
+		function = "THRU2";
+		groups = "THRU2";
+	};
+
+	pinctrl_thru3_default: thru3_default {
+		function = "THRU3";
+		groups = "THRU3";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart10_default: uart10_default {
+		function = "UART10";
+		groups = "UART10";
+	};
+
+	pinctrl_uart11_default: uart11_default {
+		function = "UART11";
+		groups = "UART11";
+	};
+
+	pinctrl_uart12g0_default: uart12g0_default {
+		function = "UART12";
+		groups = "UART12G0";
+	};
+
+	pinctrl_uart12g1_default: uart12g1_default {
+		function = "UART12";
+		groups = "UART12G1";
+	};
+
+	pinctrl_uart13g0_default: uart13g0_default {
+		function = "UART13";
+		groups = "UART13G0";
+	};
+
+	pinctrl_uart13g1_default: uart13g1_default {
+		function = "UART13";
+		groups = "UART13G1";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_uart7_default: uart7_default {
+		function = "UART7";
+		groups = "UART7";
+	};
+
+	pinctrl_uart8_default: uart8_default {
+		function = "UART8";
+		groups = "UART8";
+	};
+
+	pinctrl_uart9_default: uart9_default {
+		function = "UART9";
+		groups = "UART9";
+	};
+
+	pinctrl_vb_default: vb_default {
+		function = "VB";
+		groups = "VB";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+
+	pinctrl_wdtrst3_default: wdtrst3_default {
+		function = "WDTRST3";
+		groups = "WDTRST3";
+	};
+
+	pinctrl_wdtrst4_default: wdtrst4_default {
+		function = "WDTRST4";
+		groups = "WDTRST4";
+	};
+};

arch/arm/boot/dts/aspeed-g6.dtsi

+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/ast2600-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2600";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "aspeed,ast2600-smp";
+
+		cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+		};
+
+		cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clocks = <&syscon ASPEED_CLK_HPLL>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges;
+
+		gic: interrupt-controller@40461000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			reg = <0x40461000 0x1000>,
+			    <0x40462000 0x1000>,
+			    <0x40464000 0x2000>,
+			    <0x40466000 0x2000>;
+			};
+
+		mdio0: mdio@1e650000 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650000 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@1e650008 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650008 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mdio2: mdio@1e650010 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650010 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mdio3: mdio@1e650018 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650018 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac0: ftgmac@1e660000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ftgmac@1e680000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		mac2: ftgmac@1e670000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e670000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
+			status = "disabled";
+		};
+
+		mac3: ftgmac@1e690000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e690000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1000>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				pinctrl: pinctrl {
+					compatible = "aspeed,ast2600-pinctrl";
+				};
+
+				smp-memram@180 {
+					compatible = "aspeed,ast2600-smpmem";
+					reg = <0x180 0x40>;
+				};
+			};
+
+			rng: hwrng@1e6e2524 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2524 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2600-rtc";
+				reg = <0x1e781000 0x18>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785000 0x40>;
+			};
+
+			wdt2: watchdog@1e785040 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785040 0x40>;
+				status = "disabled";
+			};
+
+			wdt3: watchdog@1e785080 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785080 0x40>;
+				status = "disabled";
+			};
+
+			wdt4: watchdog@1e7850C0 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e7850C0 0x40>;
+				status = "disabled";
+			};
+
+			sdc: sdc@1e740000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@1e740100 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@1e740200 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			emmc: sdc@1e750000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e750000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e750000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
+				status = "disabled";
+
+				sdhci@1e750100 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x100 0x100>;
+					sdhci,auto-cmd12;
+					interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_EMMC>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_emmc_default>;
+				};
+			};
+		};
+	};
+};
+
+#include "aspeed-g6-pinctrl.dtsi"

arch/arm/boot/dts/dra7-l4.dtsi

@@ -1118,7 +1118,6 @@ segment@0 {					/* 0x48000000 */
 
 		target-module@20000 {			/* 0x48020000, ap 3 04.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart3";
 			reg = <0x20050 0x4>,
 			      <0x20054 0x4>,
 			      <0x20058 0x4>;
@@ -1263,7 +1262,6 @@ timer9: timer@0 {
 
 		gpio7_target: target-module@51000 {		/* 0x48051000, ap 45 2e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "gpio7";
 			reg = <0x51000 0x4>,
 			      <0x51010 0x4>,
 			      <0x51114 0x4>;
@@ -1297,7 +1295,6 @@ gpio7: gpio@0 {
 
 		target-module@53000 {			/* 0x48053000, ap 35 36.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "gpio8";
 			reg = <0x53000 0x4>,
 			      <0x53010 0x4>,
 			      <0x53114 0x4>;
@@ -1331,7 +1328,6 @@ gpio8: gpio@0 {
 
 		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "gpio2";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
 			      <0x55114 0x4>;
@@ -1365,7 +1361,6 @@ gpio2: gpio@0 {
 
 		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "gpio3";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
 			      <0x57114 0x4>;
@@ -1399,7 +1394,6 @@ gpio3: gpio@0 {
 
 		target-module@59000 {			/* 0x48059000, ap 17 16.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "gpio4";
 			reg = <0x59000 0x4>,
 			      <0x59010 0x4>,
 			      <0x59114 0x4>;
@@ -1433,7 +1427,6 @@ gpio4: gpio@0 {
 
 		target-module@5b000 {			/* 0x4805b000, ap 19 1e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "gpio5";
 			reg = <0x5b000 0x4>,
 			      <0x5b010 0x4>,
 			      <0x5b114 0x4>;
@@ -1467,7 +1460,6 @@ gpio5: gpio@0 {
 
 		target-module@5d000 {			/* 0x4805d000, ap 21 26.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "gpio6";
 			reg = <0x5d000 0x4>,
 			      <0x5d010 0x4>,
 			      <0x5d114 0x4>;
@@ -1501,7 +1493,6 @@ gpio6: gpio@0 {
 
 		target-module@60000 {			/* 0x48060000, ap 23 32.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "i2c3";
 			reg = <0x60000 0x8>,
 			      <0x60010 0x8>,
 			      <0x60090 0x8>;
@@ -1534,7 +1525,6 @@ i2c3: i2c@0 {
 
 		target-module@66000 {			/* 0x48066000, ap 63 14.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart5";
 			reg = <0x66050 0x4>,
 			      <0x66054 0x4>,
 			      <0x66058 0x4>;
@@ -1567,7 +1557,6 @@ uart5: serial@0 {
 
 		target-module@68000 {			/* 0x48068000, ap 53 1c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart6";
 			reg = <0x68050 0x4>,
 			      <0x68054 0x4>,
 			      <0x68058 0x4>;
@@ -1600,7 +1589,6 @@ uart6: serial@0 {
 
 		target-module@6a000 {			/* 0x4806a000, ap 24 24.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart1";
 			reg = <0x6a050 0x4>,
 			      <0x6a054 0x4>,
 			      <0x6a058 0x4>;
@@ -1633,7 +1621,6 @@ uart1: serial@0 {
 
 		target-module@6c000 {			/* 0x4806c000, ap 26 2c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart2";
 			reg = <0x6c050 0x4>,
 			      <0x6c054 0x4>,
 			      <0x6c058 0x4>;
@@ -1666,7 +1653,6 @@ uart2: serial@0 {
 
 		target-module@6e000 {			/* 0x4806e000, ap 28 0c.1 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart4";
 			reg = <0x6e050 0x4>,
 			      <0x6e054 0x4>,
 			      <0x6e058 0x4>;
@@ -1699,7 +1685,6 @@ uart4: serial@0 {
 
 		target-module@70000 {			/* 0x48070000, ap 30 22.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "i2c1";
 			reg = <0x70000 0x8>,
 			      <0x70010 0x8>,
 			      <0x70090 0x8>;
@@ -1732,7 +1717,6 @@ i2c1: i2c@0 {
 
 		target-module@72000 {			/* 0x48072000, ap 32 2a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "i2c2";
 			reg = <0x72000 0x8>,
 			      <0x72010 0x8>,
 			      <0x72090 0x8>;
@@ -1795,7 +1779,6 @@ elm: elm@0 {
 
 		target-module@7a000 {			/* 0x4807a000, ap 81 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "i2c4";
 			reg = <0x7a000 0x8>,
 			      <0x7a010 0x8>,
 			      <0x7a090 0x8>;
@@ -1828,7 +1811,6 @@ i2c4: i2c@0 {
 
 		target-module@7c000 {			/* 0x4807c000, ap 83 4a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "i2c5";
 			reg = <0x7c000 0x8>,
 			      <0x7c010 0x8>,
 			      <0x7c090 0x8>;
@@ -1942,7 +1924,6 @@ rng: rng@0 {
 
 		target-module@98000 {			/* 0x48098000, ap 47 08.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mcspi1";
 			reg = <0x98000 0x4>,
 			      <0x98010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1982,7 +1963,6 @@ mcspi1: spi@0 {
 
 		target-module@9a000 {			/* 0x4809a000, ap 49 10.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mcspi2";
 			reg = <0x9a000 0x4>,
 			      <0x9a010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2017,7 +1997,6 @@ mcspi2: spi@0 {
 
 		target-module@9c000 {			/* 0x4809c000, ap 51 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mmc1";
 			reg = <0x9c000 0x4>,
 			      <0x9c010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2077,7 +2056,6 @@ target-module@a8000 {			/* 0x480a8000, ap 59 1a.0 */
 
 		target-module@ad000 {			/* 0x480ad000, ap 61 20.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mmc3";
 			reg = <0xad000 0x4>,
 			      <0xad010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2137,7 +2115,6 @@ hdqw1w: 1w@0 {
 
 		target-module@b4000 {			/* 0x480b4000, ap 65 40.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mmc2";
 			reg = <0xb4000 0x4>,
 			      <0xb4010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2174,7 +2151,6 @@ mmc2: mmc@0 {
 
 		target-module@b8000 {			/* 0x480b8000, ap 67 48.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mcspi3";
 			reg = <0xb8000 0x4>,
 			      <0xb8010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2206,7 +2182,6 @@ mcspi3: spi@0 {
 
 		target-module@ba000 {			/* 0x480ba000, ap 69 18.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mcspi4";
 			reg = <0xba000 0x4>,
 			      <0xba010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2238,7 +2213,6 @@ mcspi4: spi@0 {
 
 		target-module@d1000 {			/* 0x480d1000, ap 71 28.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mmc4";
 			reg = <0xd1000 0x4>,
 			      <0xd1010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2384,7 +2358,6 @@ segment@0 {					/* 0x48400000 */
 
 		target-module@20000 {			/* 0x48420000, ap 47 02.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart7";
 			reg = <0x20050 0x4>,
 			      <0x20054 0x4>,
 			      <0x20058 0x4>;
@@ -2415,7 +2388,6 @@ uart7: serial@0 {
 
 		target-module@22000 {			/* 0x48422000, ap 49 0a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart8";
 			reg = <0x22050 0x4>,
 			      <0x22054 0x4>,
 			      <0x22058 0x4>;
@@ -2446,7 +2418,6 @@ uart8: serial@0 {
 
 		target-module@24000 {			/* 0x48424000, ap 51 12.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart9";
 			reg = <0x24050 0x4>,
 			      <0x24054 0x4>,
 			      <0x24058 0x4>;
@@ -2735,7 +2706,6 @@ target-module@5d000 {			/* 0x4845d000, ap 61 22.0 */
 
 		target-module@60000 {			/* 0x48460000, ap 9 0e.0 */
 			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			ti,hwmods = "mcasp1";
 			reg = <0x60000 0x4>,
 			      <0x60004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2772,7 +2742,6 @@ mcasp1: mcasp@0 {
 
 		target-module@64000 {			/* 0x48464000, ap 11 1e.0 */
 			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			ti,hwmods = "mcasp2";
 			reg = <0x64000 0x4>,
 			      <0x64004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2809,7 +2778,6 @@ mcasp2: mcasp@0 {
 
 		target-module@68000 {			/* 0x48468000, ap 13 26.0 */
 			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			ti,hwmods = "mcasp3";
 			reg = <0x68000 0x4>,
 			      <0x68004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2845,7 +2813,6 @@ mcasp3: mcasp@0 {
 
 		target-module@6c000 {			/* 0x4846c000, ap 15 2e.0 */
 			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			ti,hwmods = "mcasp4";
 			reg = <0x6c000 0x4>,
 			      <0x6c004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2881,7 +2848,6 @@ mcasp4: mcasp@0 {
 
 		target-module@70000 {			/* 0x48470000, ap 19 36.0 */
 			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			ti,hwmods = "mcasp5";
 			reg = <0x70000 0x4>,
 			      <0x70004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2917,7 +2883,6 @@ mcasp5: mcasp@0 {
 
 		target-module@74000 {			/* 0x48474000, ap 35 14.0 */
 			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			ti,hwmods = "mcasp6";
 			reg = <0x74000 0x4>,
 			      <0x74004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2953,7 +2918,6 @@ mcasp6: mcasp@0 {
 
 		target-module@78000 {			/* 0x48478000, ap 39 0c.0 */
 			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			ti,hwmods = "mcasp7";
 			reg = <0x78000 0x4>,
 			      <0x78004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2989,7 +2953,6 @@ mcasp7: mcasp@0 {
 
 		target-module@7c000 {			/* 0x4847c000, ap 43 04.0 */
 			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
-			ti,hwmods = "mcasp8";
 			reg = <0x7c000 0x4>,
 			      <0x7c004 0x4>;
 			reg-names = "rev", "sysc";
@@ -3045,7 +3008,6 @@ dcan2: can@0 {
 
 		target-module@84000 {			/* 0x48484000, ap 3 10.0 */
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
-			ti,hwmods = "gmac";
 			reg = <0x85200 0x4>,
 			      <0x85208 0x4>,
 			      <0x85204 0x4>;
@@ -3103,9 +3065,10 @@ mac: ethernet@0 {
 
 				davinci_mdio: mdio@1000 {
 					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+					clock-names = "fck";
 					#address-cells = <1>;
 					#size-cells = <0>;
-					ti,hwmods = "davinci_mdio";
 					bus_freq = <1000000>;
 					reg = <0x1000 0x100>;
 				};
@@ -4311,7 +4274,6 @@ segment@10000 {					/* 0x4ae10000 */
 
 		target-module@0 {			/* 0x4ae10000, ap 5 20.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "gpio1";
 			reg = <0x0 0x4>,
 			      <0x10 0x4>,
 			      <0x114 0x4>;
@@ -4479,7 +4441,6 @@ target-module@6000 {			/* 0x4ae26000, ap 13 48.0 */
 
 		target-module@b000 {			/* 0x4ae2b000, ap 28 02.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "uart10";
 			reg = <0xb050 0x4>,
 			      <0xb054 0x4>,
 			      <0xb058 0x4>;

arch/arm/boot/dts/gemini-dlink-dir-685.dts

@@ -72,7 +72,6 @@ panel: display@0 {
 			reg = <0>;
 			/* 50 ns min period = 20 MHz */
 			spi-max-frequency = <20000000>;
-			spi-cpol; /* Clock active low */
 			vcc-supply = <&vdisp>;
 			iovcc-supply = <&vdisp>;
 			vci-supply = <&vdisp>;

arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts

+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * OLPC XO 1.75 Laptop.
+ *
+ * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+/dts-v1/;
+#include "mmp2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "OLPC XO-1.75";
+	compatible = "olpc,xo-1.75", "mrvl,mmp2";
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@1fc00000 {
+			compatible = "simple-framebuffer";
+			reg = <0x1fc00000 (1200 * 900 * 2)>;
+			width = <1200>;
+			height = <900>;
+			stride = <(1200 * 2)>;
+			format = "r5g6b5";
+			clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>,
+				 <&soc_clocks MMP2_CLK_DISP0>;
+		};
+	};
+
+	memory {
+		linux,usable-memory = <0x0 0x1f800000>;
+		available = <0xcf000 0x1ef31000 0x1000 0xbf000>;
+		reg = <0x0 0x20000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio 129 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+
+		tablet_mode {
+			label = "E-Book Mode";
+			gpios = <&gpio 128 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			wakeup-source;
+		};
+
+		microphone_insert {
+			label = "Microphone Plug";
+			gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MICROPHONE_INSERT>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		headphone_insert {
+			label = "Headphone Plug";
+			gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_HEADPHONE_INSERT>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+	};
+
+	camera_i2c {
+		compatible = "i2c-gpio";
+		gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>,
+			<&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-gpio,timeout-ms = <1000>;
+		status = "okay";
+
+		camera@21 {
+			compatible = "ovti,ov7670";
+			reg = <0x21>;
+			reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
+			powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>;
+			clocks = <&camera0>;
+			clock-names = "xclk";
+
+			port {
+				ov7670_0: endpoint {
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&camera0_0>;
+				};
+			};
+		};
+	};
+
+	battery {
+		compatible = "olpc,xo1.5-battery", "olpc,xo1-battery";
+	};
+
+	wlan_reg: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wlan_pwrseq: pwrseq0 {
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+	};
+
+	soc {
+		axi@d4200000 {
+			ap-sp@d4290000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "olpc,ap-sp";
+				interrupts = <40>;
+				reg = <0xd4290000 0x1000>;
+				data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
+				clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_otg0 {
+	status = "okay";
+};
+
+&mmc1 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	mrvl,clk-delay-cycles = <31>;
+	broken-cd;
+	status = "okay";
+};
+
+&mmc2 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	bus-width = <4>;
+	non-removable;
+	broken-cd;
+	wakeup-source;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&wlan_reg>;
+	status = "okay";
+};
+
+&mmc3 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	bus-width = <8>;
+	non-removable;
+	broken-cd;
+	mrvl,clk-delay-cycles = <31>;
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+
+	audio-codec@1a {
+		compatible = "realtek,alc5631";
+		reg = <0x1a>;
+		status = "okay";
+	};
+};
+
+&twsi2 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+		status = "okay";
+	};
+};
+
+&twsi6 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x1d>;
+		status = "okay";
+	};
+};
+
+&ssp3 {
+	#address-cells = <0>;
+	spi-slave;
+	status = "okay";
+	ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+	slave {
+		compatible = "olpc,xo1.75-ec";
+		spi-cpha;
+		cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&camera0 {
+	status = "okay";
+
+	port {
+		camera0_0: endpoint {
+			remote-endpoint = <&ov7670_0>;
+		};
+	};
+};

arch/arm/boot/dts/mmp2.dtsi

@@ -117,7 +117,7 @@ intcmux55: interrupt-controller@d4282188 {
 				mrvl,intc-nr-irqs = <2>;
 			};
 
-			usb_otg_phy0: usb-otg-phy@d4207000 {
+			usb_phy0: usb-phy@d4207000 {
 				compatible = "marvell,mmp2-usb-phy";
 				reg = <0xd4207000 0x40>;
 				#phy-cells = <0>;
@@ -130,7 +130,7 @@ usb_otg0: usb-otg@d4208000 {
 				interrupts = <44>;
 				clocks = <&soc_clocks MMP2_CLK_USB>;
 				clock-names = "USBCLK";
-				phys = <&usb_otg_phy0>;
+				phys = <&usb_phy0>;
 				phy-names = "usb";
 				status = "disabled";
 			};
@@ -170,6 +170,28 @@ mmc4: mmc@d4281800 {
 				interrupts = <54>;
 				status = "disabled";
 			};
+
+			camera0: camera@d420a000 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a000 0x800>;
+				interrupts = <42>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			camera1: camera@d420a800 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a800 0x800>;
+				interrupts = <30>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
 		};
 
 		apb@d4000000 {	/* APB */
@@ -192,6 +214,7 @@ uart1: uart@d4030000 {
 				interrupts = <27>;
 				clocks = <&soc_clocks MMP2_CLK_UART0>;
 				resets = <&soc_clocks MMP2_CLK_UART0>;
+				reg-shift = <2>;
 				status = "disabled";
 			};
 
@@ -201,6 +224,7 @@ uart2: uart@d4017000 {
 				interrupts = <28>;
 				clocks = <&soc_clocks MMP2_CLK_UART1>;
 				resets = <&soc_clocks MMP2_CLK_UART1>;
+				reg-shift = <2>;
 				status = "disabled";
 			};
 
@@ -210,6 +234,7 @@ uart3: uart@d4018000 {
 				interrupts = <24>;
 				clocks = <&soc_clocks MMP2_CLK_UART2>;
 				resets = <&soc_clocks MMP2_CLK_UART2>;
+				reg-shift = <2>;
 				status = "disabled";
 			};
 
@@ -219,6 +244,7 @@ uart4: uart@d4016000 {
 				interrupts = <46>;
 				clocks = <&soc_clocks MMP2_CLK_UART3>;
 				resets = <&soc_clocks MMP2_CLK_UART3>;
+				reg-shift = <2>;
 				status = "disabled";
 			};
 
@@ -346,40 +372,48 @@ rtc: rtc@d4010000 {
 				status = "disabled";
 			};
 
-			ssp1: ssp@d4035000 {
+			ssp1: spi@d4035000 {
 				compatible = "marvell,mmp2-ssp";
 				reg = <0xd4035000 0x1000>;
 				clocks = <&soc_clocks MMP2_CLK_SSP0>;
 				interrupts = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
-			ssp2: ssp@d4036000 {
+			ssp2: spi@d4036000 {
 				compatible = "marvell,mmp2-ssp";
 				reg = <0xd4036000 0x1000>;
 				clocks = <&soc_clocks MMP2_CLK_SSP1>;
 				interrupts = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
-			ssp3: ssp@d4037000 {
+			ssp3: spi@d4037000 {
 				compatible = "marvell,mmp2-ssp";
 				reg = <0xd4037000 0x1000>;
 				clocks = <&soc_clocks MMP2_CLK_SSP2>;
 				interrupts = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
-			ssp4: ssp@d4039000 {
+			ssp4: spi@d4039000 {
 				compatible = "marvell,mmp2-ssp";
 				reg = <0xd4039000 0x1000>;
 				clocks = <&soc_clocks MMP2_CLK_SSP3>;
 				interrupts = <21>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,mmp2-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,

arch/arm/boot/dts/omap34xx.dtsi

@@ -100,6 +100,32 @@ smartreflex_mpu_iva: smartreflex@480c9000 {
 				interrupts = <18>;
 			};
 		};
+
+		/*
+		 * On omap34xx the OCP registers do not seem to be accessible
+		 * at all unlike on 36xx. Maybe SGX is permanently set to
+		 * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
+		 * write-only at 0x50000e10. We detect SGX based on the SGX
+		 * revision register instead of the unreadable OCP revision
+		 * register. Also note that on early 34xx es1 revision there
+		 * are also different clocks, but we do not have any dts users
+		 * for it.
+		 */
+		sgx_module: target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000014 0x4>;
+			reg-names = "rev";
+			clocks = <&sgx_fck>, <&sgx_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
 	};
 
 	thermal_zones: thermal-zones {

arch/arm/boot/dts/omap36xx.dtsi

@@ -139,6 +139,34 @@ smartreflex_mpu_iva: smartreflex@480c9000 {
 				interrupts = <18>;
 			};
 		};
+
+		/*
+		 * Note that the sysconfig register layout is a subset of the
+		 * "ti,sysc-omap4" type register with just sidle and midle bits
+		 * available while omap34xx has "ti,sysc-omap2" type sysconfig.
+		 */
+		sgx_module: target-module@50000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5000fe00 0x4>,
+			      <0x5000fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&sgx_fck>, <&sgx_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x2000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
 	};
 
 	thermal_zones: thermal-zones {

arch/arm/boot/dts/omap4-l4-abe.dtsi

@@ -255,7 +255,6 @@ dmic: dmic@0 {
 
 		target-module@30000 {			/* 0x40130000, ap 14 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "wd_timer3";
 			reg = <0x30000 0x4>,
 			      <0x30010 0x4>,
 			      <0x30014 0x4>;

arch/arm/boot/dts/omap4-l4.dtsi

@@ -456,17 +456,43 @@ usb2_phy: usb2phy@80 {
 			};
 		};
 
+		/* d2d mdm */
 		target-module@36000 {			/* 0x4a0b6000, ap 69 60.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>,
+			      <0x36014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
+			clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x36000 0x1000>;
 		};
 
+		/* d2d mpu */
 		target-module@4d000 {			/* 0x4a0cd000, ap 78 58.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4d000 0x4>,
+			      <0x4d010 0x4>,
+			      <0x4d014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
+			clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x4d000 0x1000>;
@@ -1094,7 +1120,6 @@ gpio1: gpio@0 {
 
 		target-module@4000 {			/* 0x4a314000, ap 7 18.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "wd_timer2";
 			reg = <0x4000 0x4>,
 			      <0x4010 0x4>,
 			      <0x4014 0x4>;
@@ -1695,7 +1720,6 @@ gpio6: gpio@0 {
 
 		target-module@60000 {			/* 0x48060000, ap 25 1e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "i2c3";
 			reg = <0x60000 0x8>,
 			      <0x60010 0x8>,
 			      <0x60090 0x8>;
@@ -1814,7 +1838,6 @@ uart4: serial@0 {
 
 		target-module@70000 {			/* 0x48070000, ap 32 28.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "i2c1";
 			reg = <0x70000 0x8>,
 			      <0x70010 0x8>,
 			      <0x70090 0x8>;
@@ -1846,7 +1869,6 @@ i2c1: i2c@0 {
 
 		target-module@72000 {			/* 0x48072000, ap 34 30.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "i2c2";
 			reg = <0x72000 0x8>,
 			      <0x72010 0x8>,
 			      <0x72090 0x8>;
@@ -2401,7 +2423,6 @@ segment@200000 {					/* 0x48200000 */
 
 		target-module@150000 {			/* 0x48350000, ap 77 4c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "i2c4";
 			reg = <0x150000 0x8>,
 			      <0x150010 0x8>,
 			      <0x150090 0x8>;

arch/arm/boot/dts/omap4.dtsi

@@ -330,7 +330,6 @@ abb_iva: regulator-abb-iva {
 
 		target-module@56000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "gpu";
 			reg = <0x5601fc00 0x4>,
 			      <0x5601fc10 0x4>;
 			reg-names = "rev", "sysc";

arch/arm/boot/dts/omap5.dtsi

@@ -257,6 +257,29 @@ sata: sata@4a141100 {
 			ports-implemented = <0x1>;
 		};
 
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+
 		dss: dss@58000000 {
 			compatible = "ti,omap5-dss";
 			reg = <0x58000000 0x80>;

arch/arm/boot/dts/omap54xx-clocks.dtsi

@@ -1146,6 +1146,20 @@ dss_clkctrl: clk@20 {
 		};
 	};
 
+	gpu_cm: clock-controller@1500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1500 0x100>;
+
+		gpu_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
 	l3init_cm: l3init_cm@1600 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1600 0x100>;

arch/arm/mach-exynos/Kconfig

@@ -19,6 +19,7 @@ menuconfig ARCH_EXYNOS
 	select EXYNOS_SROM
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
 	select GPIOLIB
+	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5 && VIRTUALIZATION
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h

@@ -30,7 +30,6 @@ extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
 extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
 extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0;
 extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1;
-extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
@@ -72,8 +71,6 @@ extern struct omap_hwmod am33xx_rng_hwmod;
 extern struct omap_hwmod am33xx_ocmcram_hwmod;
 extern struct omap_hwmod am33xx_smartreflex0_hwmod;
 extern struct omap_hwmod am33xx_smartreflex1_hwmod;
-extern struct omap_hwmod am33xx_cpgmac0_hwmod;
-extern struct omap_hwmod am33xx_mdio_hwmod;
 extern struct omap_hwmod am33xx_dcan0_hwmod;
 extern struct omap_hwmod am33xx_dcan1_hwmod;
 extern struct omap_hwmod am33xx_elm_hwmod;

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c

@@ -122,12 +122,6 @@ struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
-	.master		= &am33xx_cpgmac0_hwmod,
-	.slave		= &am33xx_mdio_hwmod,
-	.user		= OCP_USER_MPU,
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_elm_hwmod,

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -349,54 +349,6 @@ struct omap_hwmod_class am33xx_control_hwmod_class = {
 	.name		= "control",
 };
 
-/*
- * 'cpgmac' class
- * cpsw/cpgmac sub system
- */
-static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x8,
-	.syss_offs	= 0x4,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
-			   MSTANDBY_NO),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
-	.name		= "cpgmac0",
-	.sysc		= &am33xx_cpgmac_sysc,
-};
-
-struct omap_hwmod am33xx_cpgmac0_hwmod = {
-	.name		= "cpgmac0",
-	.class		= &am33xx_cpgmac0_hwmod_class,
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "cpsw_125mhz_gclk",
-	.mpu_rt_idx	= 1,
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * mdio class
- */
-static struct omap_hwmod_class am33xx_mdio_hwmod_class = {
-	.name		= "davinci_mdio",
-};
-
-struct omap_hwmod am33xx_mdio_hwmod = {
-	.name		= "davinci_mdio",
-	.class		= &am33xx_mdio_hwmod_class,
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.main_clk	= "cpsw_125mhz_gclk",
-};
-
 /*
  * dcan class
  */
@@ -1072,7 +1024,6 @@ static void omap_hwmod_am33xx_clkctrl(void)
 	CLKCTRL(am33xx_tptc1_hwmod, AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_tptc2_hwmod, AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_cpgmac0_hwmod, AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_pruss_hwmod, AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
@@ -1134,7 +1085,6 @@ static void omap_hwmod_am43xx_clkctrl(void)
 	CLKCTRL(am33xx_tptc1_hwmod, AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_tptc2_hwmod, AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_cpgmac0_hwmod, AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_pruss_hwmod, AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -372,13 +372,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
-	.master		= &am33xx_l4_hs_hwmod,
-	.slave		= &am33xx_cpgmac0_hwmod,
-	.clk		= "cpsw_125mhz_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
 	.master		= &am33xx_l3_main_hwmod,
 	.slave		= &am33xx_lcdc_hwmod,
@@ -462,8 +455,6 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l3_main__tptc2,
 	&am33xx_l3_main__ocmc,
 	&am33xx_l3_s__usbss,
-	&am33xx_l4_hs__cpgmac0,
-	&am33xx_cpgmac0__mdio,
 	&am33xx_l3_main__sha0,
 	&am33xx_l3_main__aes0,
 	&am33xx_l4_per__rng,

arch/arm/mach-omap2/omap_hwmod_43xx_data.c

@@ -597,13 +597,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = {
 	.user           = OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = {
-	.master		= &am43xx_l4_hs_hwmod,
-	.slave		= &am33xx_cpgmac0_hwmod,
-	.clk		= "cpsw_125mhz_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
 	.slave		= &am33xx_timer1_hwmod,
@@ -859,8 +852,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l3_main__tptc1,
 	&am33xx_l3_main__tptc2,
 	&am33xx_l3_main__ocmc,
-	&am43xx_l4_hs__cpgmac0,
-	&am33xx_cpgmac0__mdio,
 	&am33xx_l3_main__sha0,
 	&am33xx_l3_main__aes0,
 	&am43xx_l3_main__des,

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -28,7 +28,6 @@
 #include "cm2_44xx.h"
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
-#include "wd_timer.h"
 
 /* Base offset for all OMAP4 interrupts external to MPUSS */
 #define OMAP44XX_IRQ_GIC_START	32
@@ -275,29 +274,6 @@ static struct omap_hwmod omap44xx_aess_hwmod = {
 	},
 };
 
-/*
- * 'c2c' class
- * chip 2 chip interface used to plug the ape soc (omap) with an external modem
- * soc
- */
-
-static struct omap_hwmod_class omap44xx_c2c_hwmod_class = {
-	.name	= "c2c",
-};
-
-/* c2c */
-static struct omap_hwmod omap44xx_c2c_hwmod = {
-	.name		= "c2c",
-	.class		= &omap44xx_c2c_hwmod_class,
-	.clkdm_name	= "d2d_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET,
-		},
-	},
-};
-
 /*
  * 'counter' class
  * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
@@ -1085,41 +1061,6 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = {
 	},
 };
 
-/*
- * 'gpu' class
- * 2d/3d graphics accelerator
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_gpu_sysc = {
-	.rev_offs	= 0x1fc00,
-	.sysc_offs	= 0x1fc10,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_gpu_hwmod_class = {
-	.name	= "gpu",
-	.sysc	= &omap44xx_gpu_sysc,
-};
-
-/* gpu */
-static struct omap_hwmod omap44xx_gpu_hwmod = {
-	.name		= "gpu",
-	.class		= &omap44xx_gpu_hwmod_class,
-	.clkdm_name	= "l3_gfx_clkdm",
-	.main_clk	= "sgx_clk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_GFX_GFX_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /*
  * 'hdq1w' class
  * hdq / 1-wire serial interface controller
@@ -2433,61 +2374,6 @@ static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
 	},
 };
 
-/*
- * 'wd_timer' class
- * 32-bit watchdog upward counter that generates a pulse on the reset pin on
- * overflow condition
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
-	.name		= "wd_timer",
-	.sysc		= &omap44xx_wd_timer_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable,
-	.reset		= &omap2_wd_timer_reset,
-};
-
-/* wd_timer2 */
-static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &omap44xx_wd_timer_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "sys_32k_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* wd_timer3 */
-static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
-	.name		= "wd_timer3",
-	.class		= &omap44xx_wd_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "sys_32k_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-
 /*
  * interfaces
  */
@@ -2596,14 +2482,6 @@ static struct omap_hwmod_ocp_if omap44xx_fdif__l3_main_2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* gpu -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_gpu__l3_main_2 = {
-	.master		= &omap44xx_gpu_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* hsi -> l3_main_2 */
 static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
 	.master		= &omap44xx_hsi_hwmod,
@@ -2788,14 +2666,6 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
 	.user		= OCP_USER_SDMA,
 };
 
-/* l3_main_2 -> c2c */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__c2c = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_c2c_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_wkup -> counter_32k */
 static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
 	.master		= &omap44xx_l4_wkup_hwmod,
@@ -3028,14 +2898,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_2 -> gpu */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpu = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_gpu_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_per -> hdq1w */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__hdq1w = {
 	.master		= &omap44xx_l4_per_hwmod,
@@ -3396,30 +3258,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_wd_timer2_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> wd_timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_wd_timer3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> wd_timer3 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_wd_timer3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
-};
-
 /* mpu -> emif1 */
 static struct omap_hwmod_ocp_if omap44xx_mpu__emif1 = {
 	.master		= &omap44xx_mpu_hwmod,
@@ -3450,7 +3288,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_debugss__l3_main_2,
 	&omap44xx_dma_system__l3_main_2,
 	&omap44xx_fdif__l3_main_2,
-	&omap44xx_gpu__l3_main_2,
 	&omap44xx_hsi__l3_main_2,
 	&omap44xx_ipu__l3_main_2,
 	&omap44xx_iss__l3_main_2,
@@ -3474,7 +3311,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__ocp_wp_noc,
 	&omap44xx_l4_abe__aess,
 	&omap44xx_l4_abe__aess_dma,
-	&omap44xx_l3_main_2__c2c,
 	&omap44xx_l4_wkup__counter_32k,
 	&omap44xx_l4_cfg__ctrl_module_core,
 	&omap44xx_l4_cfg__ctrl_module_pad_core,
@@ -3503,7 +3339,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_per__elm,
 	&omap44xx_l4_cfg__fdif,
 	&omap44xx_l3_main_2__gpmc,
-	&omap44xx_l3_main_2__gpu,
 	&omap44xx_l4_per__hdq1w,
 	&omap44xx_l4_cfg__hsi,
 	&omap44xx_l3_main_2__ipu,
@@ -3551,9 +3386,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__usb_host_hs,
 	&omap44xx_l4_cfg__usb_otg_hs,
 	&omap44xx_l4_cfg__usb_tll_hs,
-	&omap44xx_l4_wkup__wd_timer2,
-	&omap44xx_l4_abe__wd_timer3,
-	&omap44xx_l4_abe__wd_timer3_dma,
 	&omap44xx_mpu__emif1,
 	&omap44xx_mpu__emif2,
 	&omap44xx_l3_main_2__aes1,

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -284,56 +284,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
 	},
 };
 
-/*
- * 'gmac' class
- * cpsw/gmac sub system
- */
-static struct omap_hwmod_class_sysconfig dra7xx_gmac_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x8,
-	.syss_offs	= 0x4,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
-			   MSTANDBY_NO),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class dra7xx_gmac_hwmod_class = {
-	.name		= "gmac",
-	.sysc		= &dra7xx_gmac_sysc,
-};
-
-static struct omap_hwmod dra7xx_gmac_hwmod = {
-	.name		= "gmac",
-	.class		= &dra7xx_gmac_hwmod_class,
-	.clkdm_name	= "gmac_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "dpll_gmac_ck",
-	.mpu_rt_idx	= 1,
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= DRA7XX_CM_GMAC_GMAC_CLKCTRL_OFFSET,
-			.context_offs	= DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mdio' class
- */
-static struct omap_hwmod_class dra7xx_mdio_hwmod_class = {
-	.name		= "davinci_mdio",
-};
-
-static struct omap_hwmod dra7xx_mdio_hwmod = {
-	.name		= "davinci_mdio",
-	.class		= &dra7xx_mdio_hwmod_class,
-	.clkdm_name	= "gmac_clkdm",
-	.main_clk	= "dpll_gmac_ck",
-};
-
 /*
  * 'dcan' class
  *
@@ -1046,281 +996,6 @@ static struct omap_hwmod dra7xx_mailbox13_hwmod = {
 	},
 };
 
-/*
- * 'mcspi' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_mcspi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_mcspi_hwmod_class = {
-	.name	= "mcspi",
-	.sysc	= &dra7xx_mcspi_sysc,
-};
-
-/* mcspi1 */
-static struct omap_hwmod dra7xx_mcspi1_hwmod = {
-	.name		= "mcspi1",
-	.class		= &dra7xx_mcspi_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "func_48m_fclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* mcspi2 */
-static struct omap_hwmod dra7xx_mcspi2_hwmod = {
-	.name		= "mcspi2",
-	.class		= &dra7xx_mcspi_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "func_48m_fclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* mcspi3 */
-static struct omap_hwmod dra7xx_mcspi3_hwmod = {
-	.name		= "mcspi3",
-	.class		= &dra7xx_mcspi_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "func_48m_fclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* mcspi4 */
-static struct omap_hwmod dra7xx_mcspi4_hwmod = {
-	.name		= "mcspi4",
-	.class		= &dra7xx_mcspi_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "func_48m_fclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mcasp' class
- *
- */
-static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = {
-	.rev_offs	= 0,
-	.sysc_offs	= 0x0004,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = {
-	.name	= "mcasp",
-	.sysc	= &dra7xx_mcasp_sysc,
-};
-
-/* mcasp1 */
-static struct omap_hwmod_opt_clk mcasp1_opt_clks[] = {
-	{ .role = "ahclkx", .clk = "mcasp1_ahclkx_mux" },
-	{ .role = "ahclkr", .clk = "mcasp1_ahclkr_mux" },
-};
-
-static struct omap_hwmod dra7xx_mcasp1_hwmod = {
-	.name		= "mcasp1",
-	.class		= &dra7xx_mcasp_hwmod_class,
-	.clkdm_name	= "ipu_clkdm",
-	.main_clk	= "mcasp1_aux_gfclk_mux",
-	.flags		= HWMOD_OPT_CLKS_NEEDED,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_IPU_MCASP1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_IPU_MCASP1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= mcasp1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcasp1_opt_clks),
-};
-
-/* mcasp2 */
-static struct omap_hwmod_opt_clk mcasp2_opt_clks[] = {
-	{ .role = "ahclkx", .clk = "mcasp2_ahclkx_mux" },
-	{ .role = "ahclkr", .clk = "mcasp2_ahclkr_mux" },
-};
-
-static struct omap_hwmod dra7xx_mcasp2_hwmod = {
-	.name		= "mcasp2",
-	.class		= &dra7xx_mcasp_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "mcasp2_aux_gfclk_mux",
-	.flags		= HWMOD_OPT_CLKS_NEEDED,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_MCASP2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= mcasp2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcasp2_opt_clks),
-};
-
-/* mcasp3 */
-static struct omap_hwmod_opt_clk mcasp3_opt_clks[] = {
-	{ .role = "ahclkx", .clk = "mcasp3_ahclkx_mux" },
-};
-
-static struct omap_hwmod dra7xx_mcasp3_hwmod = {
-	.name		= "mcasp3",
-	.class		= &dra7xx_mcasp_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "mcasp3_aux_gfclk_mux",
-	.flags		= HWMOD_OPT_CLKS_NEEDED,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= mcasp3_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcasp3_opt_clks),
-};
-
-/* mcasp4 */
-static struct omap_hwmod_opt_clk mcasp4_opt_clks[] = {
-	{ .role = "ahclkx", .clk = "mcasp4_ahclkx_mux" },
-};
-
-static struct omap_hwmod dra7xx_mcasp4_hwmod = {
-	.name		= "mcasp4",
-	.class		= &dra7xx_mcasp_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "mcasp4_aux_gfclk_mux",
-	.flags		= HWMOD_OPT_CLKS_NEEDED,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP4_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_MCASP4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= mcasp4_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcasp4_opt_clks),
-};
-
-/* mcasp5 */
-static struct omap_hwmod_opt_clk mcasp5_opt_clks[] = {
-	{ .role = "ahclkx", .clk = "mcasp5_ahclkx_mux" },
-};
-
-static struct omap_hwmod dra7xx_mcasp5_hwmod = {
-	.name		= "mcasp5",
-	.class		= &dra7xx_mcasp_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "mcasp5_aux_gfclk_mux",
-	.flags		= HWMOD_OPT_CLKS_NEEDED,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP5_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_MCASP5_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= mcasp5_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcasp5_opt_clks),
-};
-
-/* mcasp6 */
-static struct omap_hwmod_opt_clk mcasp6_opt_clks[] = {
-	{ .role = "ahclkx", .clk = "mcasp6_ahclkx_mux" },
-};
-
-static struct omap_hwmod dra7xx_mcasp6_hwmod = {
-	.name		= "mcasp6",
-	.class		= &dra7xx_mcasp_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "mcasp6_aux_gfclk_mux",
-	.flags		= HWMOD_OPT_CLKS_NEEDED,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP6_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_MCASP6_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= mcasp6_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcasp6_opt_clks),
-};
-
-/* mcasp7 */
-static struct omap_hwmod_opt_clk mcasp7_opt_clks[] = {
-	{ .role = "ahclkx", .clk = "mcasp7_ahclkx_mux" },
-};
-
-static struct omap_hwmod dra7xx_mcasp7_hwmod = {
-	.name		= "mcasp7",
-	.class		= &dra7xx_mcasp_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "mcasp7_aux_gfclk_mux",
-	.flags		= HWMOD_OPT_CLKS_NEEDED,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP7_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_MCASP7_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= mcasp7_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcasp7_opt_clks),
-};
-
-/* mcasp8 */
-static struct omap_hwmod_opt_clk mcasp8_opt_clks[] = {
-	{ .role = "ahclkx", .clk = "mcasp8_ahclkx_mux" },
-};
-
-static struct omap_hwmod dra7xx_mcasp8_hwmod = {
-	.name		= "mcasp8",
-	.class		= &dra7xx_mcasp_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "mcasp8_aux_gfclk_mux",
-	.flags		= HWMOD_OPT_CLKS_NEEDED,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP8_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_MCASP8_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= mcasp8_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcasp8_opt_clks),
-};
-
 /*
  * 'mpu' class
  *
@@ -2303,19 +1978,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__cpgmac0 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_gmac_hwmod,
-	.clk		= "dpll_gmac_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if dra7xx_gmac__mdio = {
-	.master		= &dra7xx_gmac_hwmod,
-	.slave		= &dra7xx_mdio_hwmod,
-	.user		= OCP_USER_MPU,
-};
-
 /* l4_wkup -> dcan1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_wkup__dcan1 = {
 	.master		= &dra7xx_l4_wkup_hwmod,
@@ -2412,94 +2074,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__sha0 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per2 -> mcasp1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp1 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_mcasp1_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> mcasp1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_mcasp1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> mcasp2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp2 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_mcasp2_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> mcasp2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_mcasp2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> mcasp3 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_mcasp3_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> mcasp3 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp3 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_mcasp3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> mcasp4 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp4 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_mcasp4_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> mcasp5 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp5 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_mcasp5_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> mcasp6 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp6 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_mcasp6_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> mcasp7 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp7 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_mcasp7_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> mcasp8 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp8 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_mcasp8_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_per1 -> elm */
 static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
 	.master		= &dra7xx_l4_per1_hwmod,
@@ -2628,38 +2202,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox13 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per1 -> mcspi1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi1 = {
-	.master		= &dra7xx_l4_per1_hwmod,
-	.slave		= &dra7xx_mcspi1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> mcspi2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi2 = {
-	.master		= &dra7xx_l4_per1_hwmod,
-	.slave		= &dra7xx_mcspi2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> mcspi3 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi3 = {
-	.master		= &dra7xx_l4_per1_hwmod,
-	.slave		= &dra7xx_mcspi3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> mcspi4 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi4 = {
-	.master		= &dra7xx_l4_per1_hwmod,
-	.slave		= &dra7xx_mcspi4_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_cfg -> mpu */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
 	.master		= &dra7xx_l4_cfg_hwmod,
@@ -3021,19 +2563,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_wkup__ctrl_module_wkup,
 	&dra7xx_l4_wkup__dcan1,
 	&dra7xx_l4_per2__dcan2,
-	&dra7xx_l4_per2__cpgmac0,
-	&dra7xx_l4_per2__mcasp1,
-	&dra7xx_l3_main_1__mcasp1,
-	&dra7xx_l4_per2__mcasp2,
-	&dra7xx_l3_main_1__mcasp2,
-	&dra7xx_l4_per2__mcasp3,
-	&dra7xx_l3_main_1__mcasp3,
-	&dra7xx_l4_per2__mcasp4,
-	&dra7xx_l4_per2__mcasp5,
-	&dra7xx_l4_per2__mcasp6,
-	&dra7xx_l4_per2__mcasp7,
-	&dra7xx_l4_per2__mcasp8,
-	&dra7xx_gmac__mdio,
 	&dra7xx_l4_cfg__dma_system,
 	&dra7xx_l3_main_1__tpcc,
 	&dra7xx_l3_main_1__tptc0,
@@ -3060,10 +2589,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per3__mailbox11,
 	&dra7xx_l4_per3__mailbox12,
 	&dra7xx_l4_per3__mailbox13,
-	&dra7xx_l4_per1__mcspi1,
-	&dra7xx_l4_per1__mcspi2,
-	&dra7xx_l4_per1__mcspi3,
-	&dra7xx_l4_per1__mcspi4,
 	&dra7xx_l4_cfg__mpu,
 	&dra7xx_l4_cfg__ocp2scp1,
 	&dra7xx_l4_cfg__ocp2scp3,

arch/arm/plat-samsung/watchdog-reset.c

@@ -62,6 +62,7 @@ void samsung_wdt_reset(void)
 #ifdef CONFIG_OF
 static const struct of_device_id s3c2410_wdt_match[] = {
 	{ .compatible = "samsung,s3c2410-wdt" },
+	{ .compatible = "samsung,s3c6410-wdt" },
 	{},
 };
 

arch/arm64/boot/dts/marvell/Makefile

@@ -2,6 +2,7 @@
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb

arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CZ.NIC Turris Mox Board
+ * 2019 by Marek Behun <marek.behun@nic.cz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "CZ.NIC Turris Mox Board";
+	compatible = "cznic,turris-mox", "marvell,armada3720",
+		     "marvell,armada3710";
+
+	aliases {
+		spi0 = &spi0;
+		ethernet1 = &eth1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		red {
+			label = "mox:red:activity";
+			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	exp_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&exp_usb3_vbus>;
+	};
+
+	vsdc_reg: vsdc-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	vsdio_reg: vsdio-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	sdhci1_pwrseq: sdhci1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp+";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
+
+		/* enabled by U-Boot if SFP module is present */
+		status = "disabled";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&pcie_reset_pins {
+	function = "gpio";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	status = "okay";
+	max-link-speed = <2>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	phys = <&comphy1 0>;
+
+	/* enabled by U-Boot if PCIe module is present */
+	status = "disabled";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&eth1 {
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	phys = <&comphy0 1>;
+};
+
+&sdhci0 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
+	vqmmc-supply = <&vsdc_reg>;
+	marvell,pad-type = "sd";
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	non-removable;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vsdio_reg>;
+	mmc-pwrseq = <&sdhci1_pwrseq>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
+	assigned-clocks = <&nb_periph_clk 7>;
+	assigned-clock-parents = <&tbg 1>;
+	assigned-clock-rates = <20000000>;
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "secure-firmware";
+				reg = <0x0 0x20000>;
+			};
+
+			partition@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x160000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
+			};
+
+			partition@190000 {
+				label = "Rescue system";
+				reg = <0x190000 0x660000>;
+			};
+
+			partition@7f0000 {
+				label = "dtb";
+				reg = <0x7f0000 0x10000>;
+			};
+		};
+	};
+
+	moxtet: moxtet@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "cznic,moxtet";
+		reg = <1>;
+		reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <10000000>;
+		spi-cpol;
+		spi-cpha;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		status = "okay";
+
+		moxtet_sfp: gpio@0 {
+			compatible = "cznic,moxtet-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			status = "disabled";
+		};
+	};
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+	phys = <&comphy2 0>;
+	usb-phy = <&usb3_phy>;
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	/* switch nodes are enabled by U-Boot if modules are present */
+	switch0@10 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x10 0>;
+		dsa,member = <0 0>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(0)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan5";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan6";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan7";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan8";
+				phy-handle = <&switch0phy8>;
+			};
+
+			port@9 {
+				reg = <0x9>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+
+			switch0port10: port@a {
+				reg = <0xa>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port9 &switch2port9>;
+				status = "disabled";
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch0@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2 0>;
+		dsa,member = <0 0>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1_topaz: switch0phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy2_topaz: switch0phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy3_topaz: switch0phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy4_topaz: switch0phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan1";
+				phy-handle = <&switch0phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan2";
+				phy-handle = <&switch0phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan3";
+				phy-handle = <&switch0phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan4";
+				phy-handle = <&switch0phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "cpu";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				ethernet = <&eth1>;
+			};
+		};
+	};
+
+	switch1@11 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x11 0>;
+		dsa,member = <0 1>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(1)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1phy1: switch1phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch1phy2: switch1phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch1phy3: switch1phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch1phy4: switch1phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch1phy5: switch1phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch1phy6: switch1phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch1phy7: switch1phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch1phy8: switch1phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan9";
+				phy-handle = <&switch1phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan10";
+				phy-handle = <&switch1phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan11";
+				phy-handle = <&switch1phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan12";
+				phy-handle = <&switch1phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan13";
+				phy-handle = <&switch1phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan14";
+				phy-handle = <&switch1phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan15";
+				phy-handle = <&switch1phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan16";
+				phy-handle = <&switch1phy8>;
+			};
+
+			switch1port9: port@9 {
+				reg = <0x9>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch0port10>;
+			};
+
+			switch1port10: port@a {
+				reg = <0xa>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch2port9>;
+				status = "disabled";
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch1@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2 0>;
+		dsa,member = <0 1>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1phy1_topaz: switch1phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch1phy2_topaz: switch1phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch1phy3_topaz: switch1phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch1phy4_topaz: switch1phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan9";
+				phy-handle = <&switch1phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan10";
+				phy-handle = <&switch1phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan11";
+				phy-handle = <&switch1phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan12";
+				phy-handle = <&switch1phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch0port10>;
+			};
+		};
+	};
+
+	switch2@12 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x12 0>;
+		dsa,member = <0 2>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(2)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2phy1: switch2phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch2phy2: switch2phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch2phy3: switch2phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch2phy4: switch2phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch2phy5: switch2phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch2phy6: switch2phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch2phy7: switch2phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch2phy8: switch2phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan17";
+				phy-handle = <&switch2phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan18";
+				phy-handle = <&switch2phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan19";
+				phy-handle = <&switch2phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan20";
+				phy-handle = <&switch2phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan21";
+				phy-handle = <&switch2phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan22";
+				phy-handle = <&switch2phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan23";
+				phy-handle = <&switch2phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan24";
+				phy-handle = <&switch2phy8>;
+			};
+
+			switch2port9: port@9 {
+				reg = <0x9>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port10 &switch0port10>;
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch2@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2 0>;
+		dsa,member = <0 2>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2phy1_topaz: switch2phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch2phy2_topaz: switch2phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch2phy3_topaz: switch2phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch2phy4_topaz: switch2phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan17";
+				phy-handle = <&switch2phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan18";
+				phy-handle = <&switch2phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan19";
+				phy-handle = <&switch2phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan20";
+				phy-handle = <&switch2phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port10 &switch0port10>;
+			};
+		};
+	};
+};

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

@@ -215,6 +215,11 @@ spi_quad_pins: spi-quad-pins {
 					function = "spi";
 				};
 
+				spi_cs1_pins: spi-cs1-pins {
+					groups = "spi_cs1";
+					function = "spi";
+				};
+
 				i2c1_pins: i2c1-pins {
 					groups = "i2c1";
 					function = "i2c";

arch/arm64/boot/dts/ti/k3-am65-main.dtsi

@@ -42,7 +42,7 @@ gic500: interrupt-controller@1800000 {
 		 */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		gic_its: gic-its@18200000 {
+		gic_its: gic-its@1820000 {
 			compatible = "arm,gic-v3-its";
 			reg = <0x00 0x01820000 0x00 0x10000>;
 			socionext,synquacer-pre-its = <0x1000000 0x400000>;
@@ -67,7 +67,7 @@ serdes0: serdes@900000 {
 		reg = <0x0 0x900000 0x0 0x2000>;
 		reg-names = "serdes";
 		#phy-cells = <2>;
-		power-domains = <&k3_pds 153>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
 		clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
 		assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
@@ -82,7 +82,7 @@ serdes1: serdes@910000 {
 		reg = <0x0 0x910000 0x0 0x2000>;
 		reg-names = "serdes";
 		#phy-cells = <2>;
-		power-domains = <&k3_pds 154>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
 		clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
 		assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
@@ -100,7 +100,7 @@ main_uart0: serial@2800000 {
 		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 146>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	main_uart1: serial@2810000 {
@@ -110,7 +110,7 @@ main_uart1: serial@2810000 {
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		power-domains = <&k3_pds 147>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	main_uart2: serial@2820000 {
@@ -120,7 +120,7 @@ main_uart2: serial@2820000 {
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		power-domains = <&k3_pds 148>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	main_pmx0: pinmux@11c000 {
@@ -147,7 +147,7 @@ main_i2c0: i2c@2000000 {
 		#size-cells = <0>;
 		clock-names = "fck";
 		clocks = <&k3_clks 110 1>;
-		power-domains = <&k3_pds 110>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	main_i2c1: i2c@2010000 {
@@ -158,7 +158,7 @@ main_i2c1: i2c@2010000 {
 		#size-cells = <0>;
 		clock-names = "fck";
 		clocks = <&k3_clks 111 1>;
-		power-domains = <&k3_pds 111>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -169,7 +169,7 @@ main_i2c2: i2c@2020000 {
 		#size-cells = <0>;
 		clock-names = "fck";
 		clocks = <&k3_clks 112 1>;
-		power-domains = <&k3_pds 112>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -180,14 +180,14 @@ main_i2c3: i2c@2030000 {
 		#size-cells = <0>;
 		clock-names = "fck";
 		clocks = <&k3_clks 113 1>;
-		power-domains = <&k3_pds 113>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	ecap0: pwm@3100000 {
 		compatible = "ti,am654-ecap", "ti,am3352-ecap";
 		#pwm-cells = <3>;
 		reg = <0x0 0x03100000 0x0 0x60>;
-		power-domains = <&k3_pds 39>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 39 0>;
 		clock-names = "fck";
 	};
@@ -197,7 +197,7 @@ main_spi0: spi@2100000 {
 		reg = <0x0 0x2100000 0x0 0x400>;
 		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&k3_clks 137 1>;
-		power-domains = <&k3_pds 137>;
+		power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -207,7 +207,7 @@ main_spi1: spi@2110000 {
 		reg = <0x0 0x2110000 0x0 0x400>;
 		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&k3_clks 138 1>;
-		power-domains = <&k3_pds 138>;
+		power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		assigned-clocks = <&k3_clks 137 1>;
@@ -219,7 +219,7 @@ main_spi2: spi@2120000 {
 		reg = <0x0 0x2120000 0x0 0x400>;
 		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&k3_clks 139 1>;
-		power-domains = <&k3_pds 139>;
+		power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -229,7 +229,7 @@ main_spi3: spi@2130000 {
 		reg = <0x0 0x2130000 0x0 0x400>;
 		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&k3_clks 140 1>;
-		power-domains = <&k3_pds 140>;
+		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -239,7 +239,7 @@ main_spi4: spi@2140000 {
 		reg = <0x0 0x2140000 0x0 0x400>;
 		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&k3_clks 141 1>;
-		power-domains = <&k3_pds 141>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -247,7 +247,7 @@ main_spi4: spi@2140000 {
 	sdhci0: sdhci@4f80000 {
 		compatible = "ti,am654-sdhci-5.1";
 		reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
-		power-domains = <&k3_pds 47>;
+		power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
 		clock-names = "clk_ahb", "clk_xin";
 		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
@@ -306,7 +306,7 @@ dwc3_0: dwc3@4000000 {
 		ranges = <0x0 0x0 0x4000000 0x20000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
-		power-domains = <&k3_pds 151>;
+		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
 		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
@@ -345,7 +345,7 @@ dwc3_1: dwc3@4020000 {
 		ranges = <0x0 0x0 0x4020000 0x20000>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
-		power-domains = <&k3_pds 152>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
 		assigned-clocks = <&k3_clks 152 2>;
 		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 
@@ -413,6 +413,12 @@ inta_main_udmass: interrupt-controller@33d00000 {
 			ti,sci-rm-range-vint = <0x0>;
 			ti,sci-rm-range-global-event = <0x1>;
 		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
 	};
 
 	main_gpio0:  main_gpio0@600000 {
@@ -451,7 +457,7 @@ pcie0_rc: pcie@5500000 {
 		compatible = "ti,am654-pcie-rc";
 		reg =  <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
 		reg-names = "app", "dbics", "config", "atu";
-		power-domains = <&k3_pds 120>;
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges = <0x81000000 0 0          0x0 0x10020000 0 0x00010000
@@ -470,7 +476,7 @@ pcie0_ep: pcie-ep@5500000 {
 		compatible = "ti,am654-pcie-ep";
 		reg =  <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
 		reg-names = "app", "dbics", "addr_space", "atu";
-		power-domains = <&k3_pds 120>;
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
 		ti,syscon-pcie-mode = <&pcie0_mode>;
 		num-ib-windows = <16>;
 		num-ob-windows = <16>;
@@ -483,7 +489,7 @@ pcie1_rc: pcie@5600000 {
 		compatible = "ti,am654-pcie-rc";
 		reg =  <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
 		reg-names = "app", "dbics", "config", "atu";
-		power-domains = <&k3_pds 121>;
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges = <0x81000000 0 0          0x0   0x18020000 0 0x00010000
@@ -502,7 +508,7 @@ pcie1_ep: pcie-ep@5600000 {
 		compatible = "ti,am654-pcie-ep";
 		reg =  <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
 		reg-names = "app", "dbics", "addr_space", "atu";
-		power-domains = <&k3_pds 121>;
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
 		ti,syscon-pcie-mode = <&pcie1_mode>;
 		num-ib-windows = <16>;
 		num-ob-windows = <16>;

arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi

@@ -14,7 +14,7 @@ mcu_uart0: serial@40a00000 {
 			interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <96000000>;
 			current-speed = <115200>;
-			power-domains = <&k3_pds 149>;
+			power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	mcu_ram: sram@41c00000 {
@@ -33,7 +33,7 @@ mcu_i2c0: i2c@40b00000 {
 		#size-cells = <0>;
 		clock-names = "fck";
 		clocks = <&k3_clks 114 1>;
-		power-domains = <&k3_pds 114>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	mcu_spi0: spi@40300000 {
@@ -41,7 +41,7 @@ mcu_spi0: spi@40300000 {
 		reg = <0x0 0x40300000 0x0 0x400>;
 		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&k3_clks 142 1>;
-		power-domains = <&k3_pds 142>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -51,7 +51,7 @@ mcu_spi1: spi@40310000 {
 		reg = <0x0 0x40310000 0x0 0x400>;
 		interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&k3_clks 143 1>;
-		power-domains = <&k3_pds 143>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -61,7 +61,7 @@ mcu_spi2: spi@40320000 {
 		reg = <0x0 0x40320000 0x0 0x400>;
 		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&k3_clks 144 1>;
-		power-domains = <&k3_pds 144>;
+		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};

arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi

@@ -20,7 +20,7 @@ dmsc: dmsc {
 
 		k3_pds: power-controller {
 			compatible = "ti,sci-pm-domain";
-			#power-domain-cells = <1>;
+			#power-domain-cells = <2>;
 		};
 
 		k3_clks: clocks {
@@ -50,7 +50,7 @@ wkup_uart0: serial@42300000 {
 		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 150>;
+		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	wkup_i2c0: i2c@42120000 {
@@ -61,7 +61,7 @@ wkup_i2c0: i2c@42120000 {
 		#size-cells = <0>;
 		clock-names = "fck";
 		clocks = <&k3_clks 115 1>;
-		power-domains = <&k3_pds 115>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
 	};
 
 	intr_wkup_gpio: interrupt-controller2 {

arch/arm64/boot/dts/ti/k3-am65.dtsi

@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
 
 / {
 	model = "Texas Instruments K3 AM654 SoC";

arch/arm64/boot/dts/ti/k3-am654-base-board.dts

@@ -151,6 +151,7 @@ &wkup_uart0 {
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
 };
 
 &wkup_i2c0 {

arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts

@@ -6,12 +6,49 @@
 /dts-v1/;
 
 #include "k3-j721e-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	chosen {
 		stdout-path = "serial2:115200n8";
 		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
 	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
+
+		sw10: sw10 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		sw11: sw11 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&main_pmx0 {
+	sw10_button_pins_default: sw10_button_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	sw11_button_pins_default: sw11_button_pins_default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+		>;
+	};
 };
 
 &wkup_uart0 {
@@ -19,6 +56,10 @@ &wkup_uart0 {
 	status = "disabled";
 };
 
+&main_uart0 {
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
 &main_uart3 {
 	/* UART not brought out */
 	status = "disabled";
@@ -48,3 +89,31 @@ &main_uart9 {
 	/* UART not brought out */
 	status = "disabled";
 };
+
+&main_gpio2 {
+	status = "disabled";
+};
+
+&main_gpio3 {
+	status = "disabled";
+};
+
+&main_gpio4 {
+	status = "disabled";
+};
+
+&main_gpio5 {
+	status = "disabled";
+};
+
+&main_gpio6 {
+	status = "disabled";
+};
+
+&main_gpio7 {
+	status = "disabled";
+};
+
+&wkup_gpio1 {
+	status = "disabled";
+};

arch/arm64/boot/dts/ti/k3-j721e-main.dtsi

@@ -31,7 +31,7 @@ gic500: interrupt-controller@1800000 {
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		gic_its: gic-its@18200000 {
+		gic_its: gic-its@1820000 {
 			compatible = "arm,gic-v3-its";
 			reg = <0x00 0x01820000 0x00 0x10000>;
 			socionext,synquacer-pre-its = <0x1000000 0x400000>;
@@ -89,6 +89,12 @@ main_udmass_inta: interrupt-controller@33d00000 {
 			ti,sci-rm-range-vint = <0xa>;
 			ti,sci-rm-range-global-event = <0xd>;
 		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
 	};
 
 	secure_proxy_main: mailbox@32c00000 {
@@ -119,7 +125,7 @@ main_uart0: serial@2800000 {
 		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 146>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
 	};
@@ -132,7 +138,7 @@ main_uart1: serial@2810000 {
 		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 278>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 278 0>;
 		clock-names = "fclk";
 	};
@@ -145,7 +151,7 @@ main_uart2: serial@2820000 {
 		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 279>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 279 0>;
 		clock-names = "fclk";
 	};
@@ -158,7 +164,7 @@ main_uart3: serial@2830000 {
 		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 280>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 280 0>;
 		clock-names = "fclk";
 	};
@@ -171,7 +177,7 @@ main_uart4: serial@2840000 {
 		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 281>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 281 0>;
 		clock-names = "fclk";
 	};
@@ -184,7 +190,7 @@ main_uart5: serial@2850000 {
 		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 282>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 282 0>;
 		clock-names = "fclk";
 	};
@@ -197,7 +203,7 @@ main_uart6: serial@2860000 {
 		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 283>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 283 0>;
 		clock-names = "fclk";
 	};
@@ -210,7 +216,7 @@ main_uart7: serial@2870000 {
 		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 284>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 284 0>;
 		clock-names = "fclk";
 	};
@@ -223,7 +229,7 @@ main_uart8: serial@2880000 {
 		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 285>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 285 0>;
 		clock-names = "fclk";
 	};
@@ -236,8 +242,140 @@ main_uart9: serial@2890000 {
 		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 286>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 286 0>;
 		clock-names = "fclk";
 	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <105 0>, <105 1>, <105 2>, <105 3>,
+			     <105 4>, <105 5>, <105 6>, <105 7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <106 0>, <106 1>, <106 2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00610000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <107 0>, <107 1>, <107 2>, <107 3>,
+			     <107 4>, <107 5>, <107 6>, <107 7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio3: gpio@611000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00611000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <108 0>, <108 1>, <108 2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 108 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00620000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <109 0>, <109 1>, <109 2>, <109 3>,
+			     <109 4>, <109 5>, <109 6>, <109 7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 109 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio5: gpio@621000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00621000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <110 0>, <110 1>, <110 2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 110 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00630000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <111 0>, <111 1>, <111 2>, <111 3>,
+			     <111 4>, <111 5>, <111 6>, <111 7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio7: gpio@631000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00631000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <112 0>, <112 1>, <112 2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 112 0>;
+		clock-names = "gpio";
+	};
 };

arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi

@@ -20,7 +20,7 @@ dmsc: dmsc@44083000 {
 
 		k3_pds: power-controller {
 			compatible = "ti,sci-pm-domain";
-			#power-domain-cells = <1>;
+			#power-domain-cells = <2>;
 		};
 
 		k3_clks: clocks {
@@ -59,7 +59,7 @@ wkup_uart0: serial@42300000 {
 		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 287>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 287 0>;
 		clock-names = "fclk";
 	};
@@ -72,7 +72,7 @@ mcu_uart0: serial@40a00000 {
 		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <96000000>;
 		current-speed = <115200>;
-		power-domains = <&k3_pds 149>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 149 0>;
 		clock-names = "fclk";
 	};
@@ -87,4 +87,38 @@ wkup_gpio_intr: interrupt-controller2 {
 		ti,sci-dst-id = <14>;
 		ti,sci-rm-range-girq = <0x5>;
 	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x42110000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <113 0>, <113 1>, <113 2>,
+			     <113 3>, <113 4>, <113 5>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <84>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x42100000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <114 0>, <114 1>, <114 2>,
+			     <114 3>, <114 4>, <114 5>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <84>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+	};
 };

arch/arm64/boot/dts/ti/k3-j721e.dtsi

@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
 
 / {
 	model = "Texas Instruments K3 J721E SoC";

drivers/bus/ti-sysc.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * ti-sysc.c - Texas Instruments sysc interconnect target driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/io.h>
@@ -62,18 +54,26 @@ static const char * const clock_names[SYSC_MAX_CLOCKS] = {
  * @module_size: size of the interconnect target module
  * @module_va: virtual address of the interconnect target module
  * @offsets: register offsets from module base
+ * @mdata: ti-sysc to hwmod translation data for a module
  * @clocks: clocks used by the interconnect target module
  * @clock_roles: clock role names for the found clocks
  * @nr_clocks: number of clocks used by the interconnect target module
+ * @rsts: resets used by the interconnect target module
  * @legacy_mode: configured for legacy mode if set
  * @cap: interconnect target module capabilities
  * @cfg: interconnect target module configuration
+ * @cookie: data used by legacy platform callbacks
  * @name: name if available
  * @revision: interconnect target module revision
+ * @enabled: sysc runtime enabled status
  * @needs_resume: runtime resume needed on resume from suspend
+ * @child_needs_resume: runtime resume needed for child on resume from suspend
+ * @disable_on_idle: status flag used for disabling modules with resets
+ * @idle_work: work structure used to perform delayed idle on a module
  * @clk_enable_quirk: module specific clock enable quirk
  * @clk_disable_quirk: module specific clock disable quirk
  * @reset_done_quirk: module specific reset done quirk
+ * @module_enable_quirk: module specific enable quirk
  */
 struct sysc {
 	struct device *dev;
@@ -95,11 +95,11 @@ struct sysc {
 	unsigned int enabled:1;
 	unsigned int needs_resume:1;
 	unsigned int child_needs_resume:1;
-	unsigned int disable_on_idle:1;
 	struct delayed_work idle_work;
 	void (*clk_enable_quirk)(struct sysc *sysc);
 	void (*clk_disable_quirk)(struct sysc *sysc);
 	void (*reset_done_quirk)(struct sysc *sysc);
+	void (*module_enable_quirk)(struct sysc *sysc);
 };
 
 static void sysc_parse_dts_quirks(struct sysc *ddata, struct device_node *np,
@@ -503,7 +503,7 @@ static void sysc_clkdm_allow_idle(struct sysc *ddata)
 static int sysc_init_resets(struct sysc *ddata)
 {
 	ddata->rsts =
-		devm_reset_control_get_optional(ddata->dev, "rstctrl");
+		devm_reset_control_get_optional_shared(ddata->dev, "rstctrl");
 	if (IS_ERR(ddata->rsts))
 		return PTR_ERR(ddata->rsts);
 
@@ -615,8 +615,8 @@ static void sysc_check_quirk_stdout(struct sysc *ddata,
  * node but children have "ti,hwmods". These belong to the interconnect
  * target node and are managed by this driver.
  */
-static int sysc_check_one_child(struct sysc *ddata,
-				struct device_node *np)
+static void sysc_check_one_child(struct sysc *ddata,
+				 struct device_node *np)
 {
 	const char *name;
 
@@ -626,22 +626,14 @@ static int sysc_check_one_child(struct sysc *ddata,
 
 	sysc_check_quirk_stdout(ddata, np);
 	sysc_parse_dts_quirks(ddata, np, true);
-
-	return 0;
 }
 
-static int sysc_check_children(struct sysc *ddata)
+static void sysc_check_children(struct sysc *ddata)
 {
 	struct device_node *child;
-	int error;
-
-	for_each_child_of_node(ddata->dev->of_node, child) {
-		error = sysc_check_one_child(ddata, child);
-		if (error)
-			return error;
-	}
 
-	return 0;
+	for_each_child_of_node(ddata->dev->of_node, child)
+		sysc_check_one_child(ddata, child);
 }
 
 /*
@@ -794,9 +786,7 @@ static int sysc_map_and_check_registers(struct sysc *ddata)
 	if (error)
 		return error;
 
-	error = sysc_check_children(ddata);
-	if (error)
-		return error;
+	sysc_check_children(ddata);
 
 	error = sysc_parse_registers(ddata);
 	if (error)
@@ -940,6 +930,9 @@ static int sysc_enable_module(struct device *dev)
 		sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg);
 	}
 
+	if (ddata->module_enable_quirk)
+		ddata->module_enable_quirk(ddata);
+
 	return 0;
 }
 
@@ -1031,8 +1024,7 @@ static int __maybe_unused sysc_runtime_suspend_legacy(struct device *dev,
 		dev_err(dev, "%s: could not idle: %i\n",
 			__func__, error);
 
-	if (ddata->disable_on_idle)
-		reset_control_assert(ddata->rsts);
+	reset_control_assert(ddata->rsts);
 
 	return 0;
 }
@@ -1043,8 +1035,7 @@ static int __maybe_unused sysc_runtime_resume_legacy(struct device *dev,
 	struct ti_sysc_platform_data *pdata;
 	int error;
 
-	if (ddata->disable_on_idle)
-		reset_control_deassert(ddata->rsts);
+	reset_control_deassert(ddata->rsts);
 
 	pdata = dev_get_platdata(ddata->dev);
 	if (!pdata)
@@ -1091,10 +1082,9 @@ static int __maybe_unused sysc_runtime_suspend(struct device *dev)
 	ddata->enabled = false;
 
 err_allow_idle:
-	sysc_clkdm_allow_idle(ddata);
+	reset_control_assert(ddata->rsts);
 
-	if (ddata->disable_on_idle)
-		reset_control_assert(ddata->rsts);
+	sysc_clkdm_allow_idle(ddata);
 
 	return error;
 }
@@ -1109,11 +1099,11 @@ static int __maybe_unused sysc_runtime_resume(struct device *dev)
 	if (ddata->enabled)
 		return 0;
 
-	if (ddata->disable_on_idle)
-		reset_control_deassert(ddata->rsts);
 
 	sysc_clkdm_deny_idle(ddata);
 
+	reset_control_deassert(ddata->rsts);
+
 	if (sysc_opt_clks_needed(ddata)) {
 		error = sysc_enable_opt_clocks(ddata);
 		if (error)
@@ -1256,6 +1246,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_MODULE_QUIRK_I2C),
 	SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xfffff0f0,
 		   SYSC_MODULE_QUIRK_I2C),
+	SYSC_QUIRK("gpu", 0x50000000, 0x14, -1, -1, 0x00010201, 0xffffffff, 0),
+	SYSC_QUIRK("gpu", 0x50000000, 0xfe00, 0xfe10, -1, 0x40000000 , 0xffffffff,
+		   SYSC_MODULE_QUIRK_SGX),
 	SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
 		   SYSC_MODULE_QUIRK_WDT),
 
@@ -1271,8 +1264,11 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0x4edb1902, 0xffffffff, 0),
 	SYSC_QUIRK("dmic", 0, 0, 0x10, -1, 0x50010000, 0xffffffff, 0),
 	SYSC_QUIRK("dwc3", 0, 0, 0x10, -1, 0x500a0200, 0xffffffff, 0),
+	SYSC_QUIRK("d2d", 0x4a0b6000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
+	SYSC_QUIRK("d2d", 0x4a0cd000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
 	SYSC_QUIRK("epwmss", 0, 0, 0x4, -1, 0x47400001, 0xffffffff, 0),
 	SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -1, 0, 0, 0),
+	SYSC_QUIRK("gpu", 0, 0xfe00, 0xfe10, -1, 0x40000000 , 0xffffffff, 0),
 	SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0),
 	SYSC_QUIRK("iss", 0, 0, 0x10, -1, 0x40000101, 0xffffffff, 0),
 	SYSC_QUIRK("lcdc", 0, 0, 0x54, -1, 0x4f201000, 0xffffffff, 0),
@@ -1424,6 +1420,15 @@ static void sysc_clk_disable_quirk_i2c(struct sysc *ddata)
 	sysc_clk_quirk_i2c(ddata, false);
 }
 
+/* 36xx SGX needs a quirk for to bypass OCP IPG interrupt logic */
+static void sysc_module_enable_quirk_sgx(struct sysc *ddata)
+{
+	int offset = 0xff08;	/* OCP_DEBUG_CONFIG */
+	u32 val = BIT(31);	/* THALIA_INT_BYPASS */
+
+	sysc_write(ddata, offset, val);
+}
+
 /* Watchdog timer needs a disable sequence after reset */
 static void sysc_reset_done_quirk_wdt(struct sysc *ddata)
 {
@@ -1466,6 +1471,9 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 	}
 
+	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX)
+		ddata->module_enable_quirk = sysc_module_enable_quirk_sgx;
+
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_WDT)
 		ddata->reset_done_quirk = sysc_reset_done_quirk_wdt;
 }
@@ -1532,7 +1540,7 @@ static int sysc_legacy_init(struct sysc *ddata)
  */
 static int sysc_rstctrl_reset_deassert(struct sysc *ddata, bool reset)
 {
-	int error, val;
+	int error;
 
 	if (!ddata->rsts)
 		return 0;
@@ -1543,14 +1551,9 @@ static int sysc_rstctrl_reset_deassert(struct sysc *ddata, bool reset)
 			return error;
 	}
 
-	error = reset_control_deassert(ddata->rsts);
-	if (error == -EEXIST)
-		return 0;
+	reset_control_deassert(ddata->rsts);
 
-	error = readx_poll_timeout(reset_control_status, ddata->rsts, val,
-				   val == 0, 100, MAX_MODULE_SOFTRESET_WAIT);
-
-	return error;
+	return 0;
 }
 
 /*
@@ -1559,12 +1562,11 @@ static int sysc_rstctrl_reset_deassert(struct sysc *ddata, bool reset)
  */
 static int sysc_reset(struct sysc *ddata)
 {
-	int sysc_offset, syss_offset, sysc_val, rstval, quirks, error = 0;
+	int sysc_offset, syss_offset, sysc_val, rstval, error = 0;
 	u32 sysc_mask, syss_done;
 
 	sysc_offset = ddata->offsets[SYSC_SYSCONFIG];
 	syss_offset = ddata->offsets[SYSC_SYSSTATUS];
-	quirks = ddata->cfg.quirks;
 
 	if (ddata->legacy_mode || sysc_offset < 0 ||
 	    ddata->cap->regbits->srst_shift < 0 ||
@@ -2427,6 +2429,10 @@ static int sysc_probe(struct platform_device *pdev)
 		goto unprepare;
 	}
 
+	/* Balance reset counts */
+	if (ddata->rsts)
+		reset_control_assert(ddata->rsts);
+
 	sysc_show_registers(ddata);
 
 	ddata->dev->type = &sysc_device_type;
@@ -2446,9 +2452,6 @@ static int sysc_probe(struct platform_device *pdev)
 		pm_runtime_put(&pdev->dev);
 	}
 
-	if (!of_get_available_child_count(ddata->dev->of_node))
-		ddata->disable_on_idle = true;
-
 	return 0;
 
 err:

drivers/clk/ti/clk-54xx.c

@@ -314,6 +314,39 @@ static const struct omap_clkctrl_reg_data omap5_dss_clkctrl_regs[] __initconst =
 	{ 0 },
 };
 
+static const char * const omap5_gpu_core_mux_parents[] __initconst = {
+	"dpll_core_h14x2_ck",
+	"dpll_per_h14x2_ck",
+	NULL,
+};
+
+static const char * const omap5_gpu_hyd_mux_parents[] __initconst = {
+	"dpll_core_h14x2_ck",
+	"dpll_per_h14x2_ck",
+	NULL,
+};
+
+static const char * const omap5_gpu_sys_clk_parents[] __initconst = {
+	"sys_clkin",
+	NULL,
+};
+
+static const struct omap_clkctrl_div_data omap5_gpu_sys_clk_data __initconst = {
+	.max_div = 2,
+};
+
+static const struct omap_clkctrl_bit_data omap5_gpu_core_bit_data[] __initconst = {
+	{ 24, TI_CLK_MUX, omap5_gpu_core_mux_parents, NULL },
+	{ 25, TI_CLK_MUX, omap5_gpu_hyd_mux_parents, NULL },
+	{ 26, TI_CLK_DIVIDER, omap5_gpu_sys_clk_parents, &omap5_gpu_sys_clk_data },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data omap5_gpu_clkctrl_regs[] __initconst = {
+	{ OMAP5_GPU_CLKCTRL, omap5_gpu_core_bit_data, CLKF_SW_SUP, "gpu_cm:clk:0000:24" },
+	{ 0 },
+};
+
 static const char * const omap5_mmc1_fclk_mux_parents[] __initconst = {
 	"func_128m_clk",
 	"dpll_per_m2x2_ck",
@@ -470,6 +503,7 @@ const struct omap_clkctrl_data omap5_clkctrl_data[] __initconst = {
 	{ 0x4a008e20, omap5_l3instr_clkctrl_regs },
 	{ 0x4a009020, omap5_l4per_clkctrl_regs },
 	{ 0x4a009420, omap5_dss_clkctrl_regs },
+	{ 0x4a009520, omap5_gpu_clkctrl_regs },
 	{ 0x4a009620, omap5_l3init_clkctrl_regs },
 	{ 0x4ae07920, omap5_wkupaon_clkctrl_regs },
 	{ 0 },

include/dt-bindings/bus/ti-sysc.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /* TI sysc interconnect target module defines */
 
 /* Generic sysc found on omap2 and later, also known as type1 */

include/dt-bindings/clock/omap5.h

@@ -89,6 +89,9 @@
 /* dss clocks */
 #define OMAP5_DSS_CORE_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x20)
 
+/* gpu clocks */
+#define OMAP5_GPU_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x20)
+
 /* l3init clocks */
 #define OMAP5_MMC1_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x28)
 #define OMAP5_MMC2_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x30)

include/dt-bindings/pinctrl/k3.h

@@ -32,4 +32,7 @@
 #define AM65X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM65X_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
+#define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
 #endif

include/linux/platform_data/ti-sysc.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
 #ifndef __TI_SYSC_DATA_H__
 #define __TI_SYSC_DATA_H__
 
@@ -47,6 +49,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_MODULE_QUIRK_SGX		BIT(18)
 #define SYSC_MODULE_QUIRK_HDQ1W		BIT(17)
 #define SYSC_MODULE_QUIRK_I2C		BIT(16)
 #define SYSC_MODULE_QUIRK_WDT		BIT(15)
@@ -70,7 +73,7 @@ struct sysc_regbits {
 
 /**
  * struct sysc_capabilities - capabilities for an interconnect target module
- *
+ * @type: sysc type identifier for the module
  * @sysc_mask: bitmask of supported SYSCONFIG register bits
  * @regbits: bitmask of SYSCONFIG register bits
  * @mod_quirks: bitmask of module specific quirks
@@ -85,8 +88,9 @@ struct sysc_capabilities {
 /**
  * struct sysc_config - configuration for an interconnect target module
  * @sysc_val: configured value for sysc register
+ * @syss_mask: configured mask value for SYSSTATUS register
  * @midlemodes: bitmask of supported master idle modes
- * @sidlemodes: bitmask of supported master idle modes
+ * @sidlemodes: bitmask of supported slave idle modes
  * @srst_udelay: optional delay needed after OCP soft reset
  * @quirks: bitmask of enabled quirks
  */