PCI hotplug: shpchp: replace printk with dev_printk

This patch replaces printks within shpchp module with dev_printks.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

drivers/pci/hotplug/shpchp.h

@@ -59,6 +59,20 @@ extern struct workqueue_struct *shpchp_wq;
 #define warn(format, arg...)						\
 	printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
+#define ctrl_dbg(ctrl, format, arg...)					\
+	do {								\
+		if (shpchp_debug)					\
+			dev_printk(, &ctrl->pci_dev->dev,		\
+					format, ## arg);		\
+	} while (0)
+#define ctrl_err(ctrl, format, arg...)					\
+	dev_err(&ctrl->pci_dev->dev, format, ## arg)
+#define ctrl_info(ctrl, format, arg...)					\
+	dev_info(&ctrl->pci_dev->dev, format, ## arg)
+#define ctrl_warn(ctrl, format, arg...)					\
+	dev_warn(&ctrl->pci_dev->dev, format, ## arg)
+
+
 #define SLOT_NAME_SIZE 10
 struct slot {
 	u8 bus;
@@ -239,7 +253,7 @@ static inline struct slot *shpchp_find_slot(struct controller *ctrl, u8 device)
 			return slot;
 	}
 
-	err("%s: slot (device=0x%x) not found\n", __func__, device);
+	ctrl_err(ctrl, "%s: slot (device=0x%x) not found\n", __func__, device);
 	return NULL;
 }
 
@@ -273,7 +287,9 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
 	pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg);
 	perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK;
 	if (perr_set) {
-		dbg ("%s  W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",__func__ , perr_set);
+		ctrl_dbg(p_slot->ctrl,
+			 "%s  W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",
+			 __func__ , perr_set);
 
 		pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set);
 	}
@@ -282,7 +298,8 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
 	pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg);
 	rse_set = pcix_mem_base_reg & RSE_MASK;
 	if (rse_set) {
-		dbg ("%s  W1C: Memory_Base_Limit[ RSE ]\n",__func__ );
+		ctrl_dbg(p_slot->ctrl, "%s  W1C: Memory_Base_Limit[ RSE ]\n",
+			 __func__);
 
 		pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set);
 	}

drivers/pci/hotplug/shpchp_core.c

@@ -89,7 +89,8 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = hotplug_slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	kfree(slot->hotplug_slot->info);
 	kfree(slot->hotplug_slot);
@@ -135,13 +136,14 @@ static int init_slots(struct controller *ctrl)
 		snprintf(name, SLOT_NAME_SIZE, "%d", slot->number);
 		hotplug_slot->ops = &shpchp_hotplug_slot_ops;
 
-		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
+		ctrl_dbg(ctrl, "Registering bus=%x dev=%x hp_slot=%x sun=%x "
 			 "slot_device_offset=%x\n", slot->bus, slot->device,
 			 slot->hp_slot, slot->number, ctrl->slot_device_offset);
 		retval = pci_hp_register(slot->hotplug_slot,
 				ctrl->pci_dev->subordinate, slot->device, name);
 		if (retval) {
-			err("pci_hp_register failed with error %d\n", retval);
+			ctrl_err(ctrl, "pci_hp_register failed with error %d\n",
+				 retval);
 			goto error_info;
 		}
 
@@ -187,7 +189,8 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
 {
 	struct slot *slot = get_slot(hotplug_slot);
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	hotplug_slot->info->attention_status = status;
 	slot->hpc_ops->set_attention_status(slot, status);
@@ -199,7 +202,8 @@ static int enable_slot (struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = get_slot(hotplug_slot);
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	return shpchp_sysfs_enable_slot(slot);
 }
@@ -208,7 +212,8 @@ static int disable_slot (struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = get_slot(hotplug_slot);
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	return shpchp_sysfs_disable_slot(slot);
 }
@@ -218,7 +223,8 @@ static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_power_status(slot, value);
 	if (retval < 0)
@@ -232,7 +238,8 @@ static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_attention_status(slot, value);
 	if (retval < 0)
@@ -246,7 +253,8 @@ static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_latch_status(slot, value);
 	if (retval < 0)
@@ -260,7 +268,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_adapter_status(slot, value);
 	if (retval < 0)
@@ -275,7 +284,8 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_max_bus_speed(slot, value);
 	if (retval < 0)
@@ -289,7 +299,8 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
 	if (retval < 0)
@@ -320,15 +331,14 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl) {
-		err("%s : out of memory\n", __func__);
+		dev_err(&pdev->dev, "%s : out of memory\n", __func__);
 		goto err_out_none;
 	}
 	INIT_LIST_HEAD(&ctrl->slot_list);
 
 	rc = shpc_init(ctrl, pdev);
 	if (rc) {
-		dbg("%s: controller initialization failed\n",
-		    SHPC_MODULE_NAME);
+		ctrl_dbg(ctrl, "controller initialization failed\n");
 		goto err_out_free_ctrl;
 	}
 
@@ -337,7 +347,7 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* Setup the slot information structures */
 	rc = init_slots(ctrl);
 	if (rc) {
-		err("%s: slot initialization failed\n", SHPC_MODULE_NAME);
+		ctrl_err(ctrl, "slot initialization failed\n");
 		goto err_out_release_ctlr;
 	}
 

drivers/pci/hotplug/shpchp_pci.c

@@ -101,10 +101,12 @@ int __ref shpchp_configure_device(struct slot *p_slot)
 	struct pci_dev *dev;
 	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
 	int num, fn;
+	struct controller *ctrl = p_slot->ctrl;
 
 	dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
 	if (dev) {
-		err("Device %s already exists at %x:%x, cannot hot-add\n",
+		ctrl_err(ctrl,
+			 "Device %s already exists at %x:%x, cannot hot-add\n",
 			 pci_name(dev), p_slot->bus, p_slot->device);
 		pci_dev_put(dev);
 		return -EINVAL;
@@ -112,7 +114,7 @@ int __ref shpchp_configure_device(struct slot *p_slot)
 
 	num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
 	if (num == 0) {
-		err("No new device found\n");
+		ctrl_err(ctrl, "No new device found\n");
 		return -ENODEV;
 	}
 
@@ -121,7 +123,7 @@ int __ref shpchp_configure_device(struct slot *p_slot)
 		if (!dev)
 			continue;
 		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
-			err("Cannot hot-add display device %s\n",
+			ctrl_err(ctrl, "Cannot hot-add display device %s\n",
 				 pci_name(dev));
 			pci_dev_put(dev);
 			continue;
@@ -138,13 +140,14 @@ int __ref shpchp_configure_device(struct slot *p_slot)
 					break;
 			}
 			if (busnr >= end) {
-				err("No free bus for hot-added bridge\n");
+				ctrl_err(ctrl,
+					 "No free bus for hot-added bridge\n");
 				pci_dev_put(dev);
 				continue;
 			}
 			child = pci_add_new_bus(parent, dev, busnr);
 			if (!child) {
-				err("Cannot add new bus for %s\n",
+				ctrl_err(ctrl, "Cannot add new bus for %s\n",
 					 pci_name(dev));
 				pci_dev_put(dev);
 				continue;
@@ -168,8 +171,10 @@ int shpchp_unconfigure_device(struct slot *p_slot)
 	int j;
 	u8 bctl = 0;
 	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
+	struct controller *ctrl = p_slot->ctrl;
 
-	dbg("%s: bus/dev = %x/%x\n", __func__, p_slot->bus, p_slot->device);
+	ctrl_dbg(ctrl, "%s: bus/dev = %x/%x\n",
+		 __func__, p_slot->bus, p_slot->device);
 
 	for (j=0; j<8 ; j++) {
 		struct pci_dev* temp = pci_get_slot(parent,
@@ -177,7 +182,7 @@ int shpchp_unconfigure_device(struct slot *p_slot)
 		if (!temp)
 			continue;
 		if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
-			err("Cannot remove display device %s\n",
+			ctrl_err(ctrl, "Cannot remove display device %s\n",
 				 pci_name(temp));
 			pci_dev_put(temp);
 			continue;
@@ -185,7 +190,8 @@ int shpchp_unconfigure_device(struct slot *p_slot)
 		if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 			pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
 			if (bctl & PCI_BRIDGE_CTL_VGA) {
-				err("Cannot remove display device %s\n",
+				ctrl_err(ctrl,
+					 "Cannot remove display device %s\n",
 					 pci_name(temp));
 				pci_dev_put(temp);
 				continue;