Skip to content

L
linux
Commit fa26e4d2 authored by Vaibhav Hiremath's avatar Vaibhav Hiremath Committed by Mark Brown
Browse files
Options

regulator: 88pm800: Use regulator_nodes/of_match in the descriptor 

This patch is add regulator_nodes/of_match in the regulator
descriptor for using information from DT instead of specific codes.

With this patch, driver gets simplified,

  - No need to maintain "struct of_regulator_match" table
    and call of_regulator_match() fn.
  - No need for pm800_regulator_dt_init() fn, as it was only
    used for of_regulator_match().
  - probe() fn got simplified around regulator_config and regulator_desc
    initialization.
Signed-off-by: default avatarVaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent a07d94a5
Show whitespace changes
Inline Side-by-side
Showing with 44 additions and 99 deletions
drivers/regulator/88pm800.c
View file @ fa26e4d2
......@@ -91,10 +91,12 @@ struct pm800_regulators {
* not the constant voltage table.
* n_volt - Number of available selectors
*/
#define PM800_BUCK(vreg, ereg, ebit, amax, volt_ranges, n_volt) \
#define PM800_BUCK(match, vreg, ereg, ebit, amax, volt_ranges, n_volt) \
{ \
.desc = { \
.name = #vreg, \
.of_match = of_match_ptr(#match), \
.regulators_node = of_match_ptr("regulators"), \
.ops = &pm800_volt_range_ops, \
.type = REGULATOR_VOLTAGE, \
.id = PM800_ID_##vreg, \
......@@ -119,10 +121,12 @@ struct pm800_regulators {
* For all the LDOes, there are too many ranges. Using volt_table will be
* simpler and faster.
*/
#define PM800_LDO(vreg, ereg, ebit, amax, ldo_volt_table) \
#define PM800_LDO(match, vreg, ereg, ebit, amax, ldo_volt_table) \
{ \
.desc = { \
.name = #vreg, \
.of_match = of_match_ptr(#match), \
.regulators_node = of_match_ptr("regulators"), \
.ops = &pm800_volt_table_ops, \
.type = REGULATOR_VOLTAGE, \
.id = PM800_ID_##vreg, \
......@@ -200,99 +204,43 @@ static struct regulator_ops pm800_volt_table_ops = {
/* The array is indexed by id(PM800_ID_XXX) */
static struct pm800_regulator_info pm800_regulator_info[] = {
PM800_BUCK(BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range, 0x55),
PM800_BUCK(BUCK2, BUCK_ENA, 1, 1200000, buck2_5_volt_range, 0x73),
PM800_BUCK(BUCK3, BUCK_ENA, 2, 1200000, buck2_5_volt_range, 0x73),
PM800_BUCK(BUCK4, BUCK_ENA, 3, 1200000, buck2_5_volt_range, 0x73),
PM800_BUCK(BUCK5, BUCK_ENA, 4, 1200000, buck2_5_volt_range, 0x73),
PM800_LDO(LDO1, LDO_ENA1_1, 0, 200000, ldo1_volt_table),
PM800_LDO(LDO2, LDO_ENA1_1, 1, 10000, ldo2_volt_table),
PM800_LDO(LDO3, LDO_ENA1_1, 2, 300000, ldo3_17_volt_table),
PM800_LDO(LDO4, LDO_ENA1_1, 3, 300000, ldo3_17_volt_table),
PM800_LDO(LDO5, LDO_ENA1_1, 4, 300000, ldo3_17_volt_table),
PM800_LDO(LDO6, LDO_ENA1_1, 5, 300000, ldo3_17_volt_table),
PM800_LDO(LDO7, LDO_ENA1_1, 6, 300000, ldo3_17_volt_table),
PM800_LDO(LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
PM800_LDO(LDO9, LDO_ENA1_2, 0, 300000, ldo3_17_volt_table),
PM800_LDO(LDO10, LDO_ENA1_2, 1, 300000, ldo3_17_volt_table),
PM800_LDO(LDO11, LDO_ENA1_2, 2, 300000, ldo3_17_volt_table),
PM800_LDO(LDO12, LDO_ENA1_2, 3, 300000, ldo3_17_volt_table),
PM800_LDO(LDO13, LDO_ENA1_2, 4, 300000, ldo3_17_volt_table),
PM800_LDO(LDO14, LDO_ENA1_2, 5, 300000, ldo3_17_volt_table),
PM800_LDO(LDO15, LDO_ENA1_2, 6, 300000, ldo3_17_volt_table),
PM800_LDO(LDO16, LDO_ENA1_2, 7, 300000, ldo3_17_volt_table),
PM800_LDO(LDO17, LDO_ENA1_3, 0, 300000, ldo3_17_volt_table),
PM800_LDO(LDO18, LDO_ENA1_3, 1, 200000, ldo18_19_volt_table),
PM800_LDO(LDO19, LDO_ENA1_3, 2, 200000, ldo18_19_volt_table),
PM800_BUCK(buck1, BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range, 0x55),
PM800_BUCK(buck2, BUCK2, BUCK_ENA, 1, 1200000, buck2_5_volt_range, 0x73),
PM800_BUCK(buck3, BUCK3, BUCK_ENA, 2, 1200000, buck2_5_volt_range, 0x73),
PM800_BUCK(buck4, BUCK4, BUCK_ENA, 3, 1200000, buck2_5_volt_range, 0x73),
PM800_BUCK(buck5, BUCK5, BUCK_ENA, 4, 1200000, buck2_5_volt_range, 0x73),
PM800_LDO(ldo1, LDO1, LDO_ENA1_1, 0, 200000, ldo1_volt_table),
PM800_LDO(ldo2, LDO2, LDO_ENA1_1, 1, 10000, ldo2_volt_table),
PM800_LDO(ldo3, LDO3, LDO_ENA1_1, 2, 300000, ldo3_17_volt_table),
PM800_LDO(ldo4, LDO4, LDO_ENA1_1, 3, 300000, ldo3_17_volt_table),
PM800_LDO(ldo5, LDO5, LDO_ENA1_1, 4, 300000, ldo3_17_volt_table),
PM800_LDO(ldo6, LDO6, LDO_ENA1_1, 5, 300000, ldo3_17_volt_table),
PM800_LDO(ldo7, LDO7, LDO_ENA1_1, 6, 300000, ldo3_17_volt_table),
PM800_LDO(ldo8, LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
PM800_LDO(ldo9, LDO9, LDO_ENA1_2, 0, 300000, ldo3_17_volt_table),
PM800_LDO(ldo10, LDO10, LDO_ENA1_2, 1, 300000, ldo3_17_volt_table),
PM800_LDO(ldo11, LDO11, LDO_ENA1_2, 2, 300000, ldo3_17_volt_table),
PM800_LDO(ldo12, LDO12, LDO_ENA1_2, 3, 300000, ldo3_17_volt_table),
PM800_LDO(ldo13, LDO13, LDO_ENA1_2, 4, 300000, ldo3_17_volt_table),
PM800_LDO(ldo14, LDO14, LDO_ENA1_2, 5, 300000, ldo3_17_volt_table),
PM800_LDO(ldo15, LDO15, LDO_ENA1_2, 6, 300000, ldo3_17_volt_table),
PM800_LDO(ldo16, LDO16, LDO_ENA1_2, 7, 300000, ldo3_17_volt_table),
PM800_LDO(ldo17, LDO17, LDO_ENA1_3, 0, 300000, ldo3_17_volt_table),
PM800_LDO(ldo18, LDO18, LDO_ENA1_3, 1, 200000, ldo18_19_volt_table),
PM800_LDO(ldo19, LDO19, LDO_ENA1_3, 2, 200000, ldo18_19_volt_table),
};
#define PM800_REGULATOR_OF_MATCH(_name, _id) \
[PM800_ID_##_id] = { \
.name = #_name, \
.driver_data = &pm800_regulator_info[PM800_ID_##_id], \
}
static struct of_regulator_match pm800_regulator_matches[] = {
PM800_REGULATOR_OF_MATCH(buck1, BUCK1),
PM800_REGULATOR_OF_MATCH(buck2, BUCK2),
PM800_REGULATOR_OF_MATCH(buck3, BUCK3),
PM800_REGULATOR_OF_MATCH(buck4, BUCK4),
PM800_REGULATOR_OF_MATCH(buck5, BUCK5),
PM800_REGULATOR_OF_MATCH(ldo1, LDO1),
PM800_REGULATOR_OF_MATCH(ldo2, LDO2),
PM800_REGULATOR_OF_MATCH(ldo3, LDO3),
PM800_REGULATOR_OF_MATCH(ldo4, LDO4),
PM800_REGULATOR_OF_MATCH(ldo5, LDO5),
PM800_REGULATOR_OF_MATCH(ldo6, LDO6),
PM800_REGULATOR_OF_MATCH(ldo7, LDO7),
PM800_REGULATOR_OF_MATCH(ldo8, LDO8),
PM800_REGULATOR_OF_MATCH(ldo9, LDO9),
PM800_REGULATOR_OF_MATCH(ldo10, LDO10),
PM800_REGULATOR_OF_MATCH(ldo11, LDO11),
PM800_REGULATOR_OF_MATCH(ldo12, LDO12),
PM800_REGULATOR_OF_MATCH(ldo13, LDO13),
PM800_REGULATOR_OF_MATCH(ldo14, LDO14),
PM800_REGULATOR_OF_MATCH(ldo15, LDO15),
PM800_REGULATOR_OF_MATCH(ldo16, LDO16),
PM800_REGULATOR_OF_MATCH(ldo17, LDO17),
PM800_REGULATOR_OF_MATCH(ldo18, LDO18),
PM800_REGULATOR_OF_MATCH(ldo19, LDO19),
};
static int pm800_regulator_dt_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
int ret;
ret = of_regulator_match(&pdev->dev, np,
pm800_regulator_matches,
ARRAY_SIZE(pm800_regulator_matches));
if (ret < 0)
return ret;
return 0;
}
static int pm800_regulator_probe(struct platform_device *pdev)
{
struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct pm80x_platform_data *pdata = dev_get_platdata(pdev->dev.parent);
struct pm800_regulators *pm800_data;
struct pm800_regulator_info *info;
struct regulator_config config = { };
struct regulator_init_data *init_data;
int i, ret;
if (!pdata || pdata->num_regulators == 0) {
if (IS_ENABLED(CONFIG_OF)) {
ret = pm800_regulator_dt_init(pdev);
if (ret)
return ret;
} else {
return -ENODEV;
}
} else if (pdata->num_regulators) {
if (pdata && pdata->num_regulators) {
unsigned int count = 0;
/* Check whether num_regulator is valid. */
......@@ -302,8 +250,6 @@ static int pm800_regulator_probe(struct platform_device *pdev)
}
if (count != pdata->num_regulators)
return -EINVAL;
} else {
return -EINVAL;
}
pm800_data = devm_kzalloc(&pdev->dev, sizeof(*pm800_data),
......@@ -316,28 +262,27 @@ static int pm800_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pm800_data);
config.dev = chip->dev;
config.regmap = pm800_data->map;
for (i = 0; i < PM800_ID_RG_MAX; i++) {
struct regulator_dev *regulator;
if (!pdata || pdata->num_regulators == 0)
init_data = pm800_regulator_matches[i].init_data;
else
if (pdata && pdata->num_regulators) {
init_data = pdata->regulators[i];
if (!init_data)
continue;
info = pm800_regulator_matches[i].driver_data;
config.dev = &pdev->dev;
config.init_data = init_data;
config.driver_data = info;
config.regmap = pm800_data->map;
config.of_node = pm800_regulator_matches[i].of_node;
}
config.driver_data = &pm800_regulator_info[i];
regulator = devm_regulator_register(&pdev->dev,
&info->desc, &config);
&pm800_regulator_info[i].desc, &config);
if (IS_ERR(regulator)) {
ret = PTR_ERR(regulator);
dev_err(&pdev->dev, "Failed to register %s\n",
info->desc.name);
pm800_regulator_info[i].desc.name);
return ret;
}
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7