Skip to content

L
linux
Commit fa9fcf5f authored by Matthew Wilcox's avatar Matthew Wilcox Committed by Linus Torvalds
Browse files
Options

[PATCH] PA-RISC update 

Updates for 2.6.4 for PARISC:

 - defconfigs (Randolph Chung)
 - copyright updates (Grant Grundler)
 - Fix DOS hole in sys_clone (James Bottomley)
 - missing hardware ID (Andy Walker)
 - disable interrupts during cache-flushes (LaMont Jones)
 - Fix crash on machines with <256MB ram (Randolph Chung)
 - Make SuckyIO IDE work better (Randolph Chung)
 - Align data_start so the extable is writable (Randolph Chung)
 - Extensive rewrite of virtual merging code (James Bottomley)
 - Fix EISA, non-PCI module builds (Matthew Wilcox)
 - Fix Elroy PCI config space byte & word writes (Grant Grundler)
 - Eliminate a warning in parport_gsc (Helge Deller)
 - Fix endian problem with ide mmio macros (Randolph Chung)
 - Delete asm/keyboard.h (Matthew Wilcox)
 - Delete asm/md.h (Grant Grundler)
 - Eliminate a warning in ALSA harmony (Matthew Wilcox)
parent 1e04a796
Hide whitespace changes
Inline Side-by-side
Showing with 1495 additions and 795 deletions
arch/parisc/configs/712_defconfig
View file @ fa9fcf5f
...@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y ...@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15 CONFIG_LOG_BUF_SHIFT=15
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set # CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set # CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y CONFIG_KALLSYMS=y
...@@ -30,6 +31,7 @@ CONFIG_EPOLL=y ...@@ -30,6 +31,7 @@ CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# #
# Loadable module support # Loadable module support
...@@ -64,7 +66,6 @@ CONFIG_GSC_WAX=y ...@@ -64,7 +66,6 @@ CONFIG_GSC_WAX=y
# CONFIG_PCI is not set # CONFIG_PCI is not set
# CONFIG_CHASSIS_LCD_LED is not set # CONFIG_CHASSIS_LCD_LED is not set
# CONFIG_PDC_CHASSIS is not set # CONFIG_PDC_CHASSIS is not set
# CONFIG_HOTPLUG is not set
# #
# Executable file formats # Executable file formats
...@@ -79,6 +80,7 @@ CONFIG_BINFMT_ELF=y ...@@ -79,6 +80,7 @@ CONFIG_BINFMT_ELF=y
# #
# Generic Driver Options # Generic Driver Options
# #
CONFIG_DEBUG_DRIVER=y
# #
# Memory Technology Devices (MTD) # Memory Technology Devices (MTD)
...@@ -99,7 +101,6 @@ CONFIG_PARPORT_GSC=y ...@@ -99,7 +101,6 @@ CONFIG_PARPORT_GSC=y
# #
# Plug and Play support # Plug and Play support
# #
# CONFIG_PNP is not set
# #
# Block devices # Block devices
...@@ -110,7 +111,6 @@ CONFIG_BLK_DEV_LOOP=y ...@@ -110,7 +111,6 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# #
# ATA/ATAPI/MFM/RLL support # ATA/ATAPI/MFM/RLL support
...@@ -144,7 +144,6 @@ CONFIG_CHR_DEV_SG=y ...@@ -144,7 +144,6 @@ CONFIG_CHR_DEV_SG=y
# #
# SCSI low-level drivers # SCSI low-level drivers
# #
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_PPA is not set # CONFIG_SCSI_PPA is not set
...@@ -170,12 +169,20 @@ CONFIG_MD_RAID5=y ...@@ -170,12 +169,20 @@ CONFIG_MD_RAID5=y
# #
# Fusion MPT device support # Fusion MPT device support
# #
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
# #
# I2O device support # I2O device support
# #
#
# Macintosh device drivers
#
# #
# Networking support # Networking support
# #
...@@ -287,7 +294,7 @@ CONFIG_NET_RADIO=y ...@@ -287,7 +294,7 @@ CONFIG_NET_RADIO=y
# #
# ISDN subsystem # ISDN subsystem
# #
# CONFIG_ISDN_BOOL is not set # CONFIG_ISDN is not set
# #
# Telephony Support # Telephony Support
...@@ -318,8 +325,8 @@ CONFIG_INPUT_EVDEV=y ...@@ -318,8 +325,8 @@ CONFIG_INPUT_EVDEV=y
CONFIG_SOUND_GAMEPORT=y CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_GSCPS2=y
# CONFIG_HP_SDC is not set # CONFIG_HP_SDC is not set
# #
...@@ -331,15 +338,17 @@ CONFIG_INPUT_KEYBOARD=y ...@@ -331,15 +338,17 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_HIL_OLD is not set # CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_HIL is not set
# CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_UINPUT is not set # CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_GSC=y # CONFIG_HP_SDC_RTC is not set
# #
# Character devices # Character devices
...@@ -370,30 +379,13 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y ...@@ -370,30 +379,13 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256 CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set # CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set # CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set # CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Algorithms
#
#
# I2C Hardware Bus support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# #
# Mice # Mice
# #
...@@ -424,6 +416,15 @@ CONFIG_GEN_RTC=y ...@@ -424,6 +416,15 @@ CONFIG_GEN_RTC=y
# CONFIG_DRM is not set # CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set # CONFIG_RAW_DRIVER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
# #
# Multimedia devices # Multimedia devices
# #
...@@ -444,7 +445,6 @@ CONFIG_FB_STI=y ...@@ -444,7 +445,6 @@ CONFIG_FB_STI=y
# #
# Console display driver support # Console display driver support
# #
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set # CONFIG_MDA_CONSOLE is not set
CONFIG_STI_CONSOLE=y CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_COLUMNS=160
...@@ -474,6 +474,11 @@ CONFIG_LOGO_PARISC_CLUT224=y ...@@ -474,6 +474,11 @@ CONFIG_LOGO_PARISC_CLUT224=y
# USB support # USB support
# #
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# #
# File systems # File systems
# #
...@@ -511,7 +516,6 @@ CONFIG_JOLIET=y ...@@ -511,7 +516,6 @@ CONFIG_JOLIET=y
# #
CONFIG_PROC_FS=y CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set # CONFIG_HUGETLB_PAGE is not set
...@@ -520,6 +524,7 @@ CONFIG_RAMFS=y ...@@ -520,6 +524,7 @@ CONFIG_RAMFS=y
# #
# Miscellaneous filesystems # Miscellaneous filesystems
# #
# CONFIG_HFSPLUS_FS is not set
# CONFIG_CRAMFS is not set # CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set # CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set # CONFIG_HPFS_FS is not set
...@@ -549,11 +554,11 @@ CONFIG_SUNRPC=y ...@@ -549,11 +554,11 @@ CONFIG_SUNRPC=y
# #
# CONFIG_PARTITION_ADVANCED is not set # CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
# #
# Native Language Support # Native Language Support
# #
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_737 is not set
...@@ -628,6 +633,7 @@ CONFIG_CRYPTO=y ...@@ -628,6 +633,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_TEST is not set
......
arch/parisc/configs/a500_defconfig
View file @ fa9fcf5f
...@@ -23,6 +23,7 @@ CONFIG_SYSVIPC=y ...@@ -23,6 +23,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=16 CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y CONFIG_EMBEDDED=y
...@@ -72,7 +73,6 @@ CONFIG_IOMMU_SBA=y ...@@ -72,7 +73,6 @@ CONFIG_IOMMU_SBA=y
# CONFIG_SUPERIO is not set # CONFIG_SUPERIO is not set
CONFIG_CHASSIS_LCD_LED=y CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set # CONFIG_PDC_CHASSIS is not set
CONFIG_HOTPLUG=y
# #
# PCMCIA/CardBus support # PCMCIA/CardBus support
...@@ -102,6 +102,7 @@ CONFIG_BINFMT_ELF=y ...@@ -102,6 +102,7 @@ CONFIG_BINFMT_ELF=y
# Generic Driver Options # Generic Driver Options
# #
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
CONFIG_DEBUG_DRIVER=y
# #
# Memory Technology Devices (MTD) # Memory Technology Devices (MTD)
...@@ -116,7 +117,6 @@ CONFIG_BINFMT_ELF=y ...@@ -116,7 +117,6 @@ CONFIG_BINFMT_ELF=y
# #
# Plug and Play support # Plug and Play support
# #
# CONFIG_PNP is not set
# #
# Block devices # Block devices
...@@ -195,9 +195,15 @@ CONFIG_SCSI_SYM53C8XX_IOMAPPED=y ...@@ -195,9 +195,15 @@ CONFIG_SCSI_SYM53C8XX_IOMAPPED=y
CONFIG_SCSI_QLOGIC_FC=m CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA6322=m
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m CONFIG_SCSI_DEBUG=m
# #
...@@ -215,6 +221,7 @@ CONFIG_MD_LINEAR=y ...@@ -215,6 +221,7 @@ CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y CONFIG_MD_RAID1=y
# CONFIG_MD_RAID5 is not set # CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set # CONFIG_BLK_DEV_DM is not set
...@@ -227,14 +234,17 @@ CONFIG_FUSION_ISENSE=m ...@@ -227,14 +234,17 @@ CONFIG_FUSION_ISENSE=m
CONFIG_FUSION_CTL=m CONFIG_FUSION_CTL=m
# #
# IEEE 1394 (FireWire) support (EXPERIMENTAL) # IEEE 1394 (FireWire) support
# #
# CONFIG_IEEE1394 is not set # CONFIG_IEEE1394 is not set
# #
# I2O device support # I2O device support
# #
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# #
# Networking support # Networking support
...@@ -362,7 +372,7 @@ CONFIG_LLC2=m ...@@ -362,7 +372,7 @@ CONFIG_LLC2=m
# #
# Network testing # Network testing
# #
# CONFIG_NET_PKTGEN is not set CONFIG_NET_PKTGEN=m
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
# #
...@@ -391,9 +401,10 @@ CONFIG_TYPHOON=m ...@@ -391,9 +401,10 @@ CONFIG_TYPHOON=m
# #
CONFIG_NET_TULIP=y CONFIG_NET_TULIP=y
CONFIG_DE2104X=m CONFIG_DE2104X=m
CONFIG_TULIP=y CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set # CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set # CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set # CONFIG_DM9102 is not set
...@@ -405,10 +416,12 @@ CONFIG_PCNET32=m ...@@ -405,10 +416,12 @@ CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set # CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set # CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set # CONFIG_DGRS is not set
CONFIG_EEPRO100=m CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set # CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m CONFIG_E100=m
CONFIG_E100_NAPI=y
# CONFIG_FEALNX is not set # CONFIG_FEALNX is not set
CONFIG_NATSEMI=m CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set # CONFIG_NE2K_PCI is not set
...@@ -418,6 +431,7 @@ CONFIG_8139TOO=m ...@@ -418,6 +431,7 @@ CONFIG_8139TOO=m
# CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set # CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set # CONFIG_8139_OLD_RX_RESET is not set
CONFIG_8139_RXBUF_IDX=1
# CONFIG_SIS900 is not set # CONFIG_SIS900 is not set
CONFIG_EPIC100=m CONFIG_EPIC100=m
# CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE is not set
...@@ -482,13 +496,13 @@ CONFIG_HERMES=m ...@@ -482,13 +496,13 @@ CONFIG_HERMES=m
CONFIG_PLX_HERMES=m CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
# #
# Wireless 802.11b Pcmcia/Cardbus cards support # Wireless 802.11b Pcmcia/Cardbus cards support
# #
CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m CONFIG_AIRO_CS=m
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_PCMCIA_WL3501 is not set # CONFIG_PCMCIA_WL3501 is not set
CONFIG_NET_WIRELESS=y CONFIG_NET_WIRELESS=y
...@@ -535,7 +549,7 @@ CONFIG_PCMCIA_XIRC2PS=m ...@@ -535,7 +549,7 @@ CONFIG_PCMCIA_XIRC2PS=m
# #
# ISDN subsystem # ISDN subsystem
# #
# CONFIG_ISDN_BOOL is not set # CONFIG_ISDN is not set
# #
# Telephony Support # Telephony Support
...@@ -602,25 +616,7 @@ CONFIG_PDC_CONSOLE=y ...@@ -602,25 +616,7 @@ CONFIG_PDC_CONSOLE=y
CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256 # CONFIG_LEGACY_PTYS is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Algorithms
#
#
# I2C Hardware Bus support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# #
# Mice # Mice
...@@ -658,6 +654,15 @@ CONFIG_GEN_RTC_X=y ...@@ -658,6 +654,15 @@ CONFIG_GEN_RTC_X=y
CONFIG_RAW_DRIVER=y CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256 CONFIG_MAX_RAW_DEVS=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
# #
# Multimedia devices # Multimedia devices
# #
...@@ -676,7 +681,6 @@ CONFIG_MAX_RAW_DEVS=256 ...@@ -676,7 +681,6 @@ CONFIG_MAX_RAW_DEVS=256
# #
# Console display driver support # Console display driver support
# #
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set # CONFIG_MDA_CONSOLE is not set
# CONFIG_STI_CONSOLE is not set # CONFIG_STI_CONSOLE is not set
CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_COLUMNS=160
...@@ -692,6 +696,10 @@ CONFIG_DUMMY_CONSOLE=y ...@@ -692,6 +696,10 @@ CONFIG_DUMMY_CONSOLE=y
# USB support # USB support
# #
# CONFIG_USB is not set # CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set # CONFIG_USB_GADGET is not set
# #
...@@ -711,6 +719,7 @@ CONFIG_JFS_FS=m ...@@ -711,6 +719,7 @@ CONFIG_JFS_FS=m
CONFIG_XFS_FS=m CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set # CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set # CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set # CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set # CONFIG_ROMFS_FS is not set
...@@ -740,7 +749,6 @@ CONFIG_VFAT_FS=m ...@@ -740,7 +749,6 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_FS=y CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set # CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLBFS is not set
...@@ -753,6 +761,7 @@ CONFIG_RAMFS=y ...@@ -753,6 +761,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set # CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set # CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set # CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set # CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set # CONFIG_EFS_FS is not set
...@@ -876,6 +885,7 @@ CONFIG_CRYPTO_SERPENT=m ...@@ -876,6 +885,7 @@ CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_TEST=m
......
arch/parisc/configs/b180_defconfig 0 → 100644
View file @ fa9fcf5f
#
# Automatically generated make config: don't edit
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_KMOD is not set
#
# Processor type and features
#
# CONFIG_PA7000 is not set
# CONFIG_PA7100LC is not set
CONFIG_PA7200=y
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
# CONFIG_64BIT is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
#
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
CONFIG_GSC=y
# CONFIG_HPPB is not set
# CONFIG_IOMMU_CCIO is not set
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_EISA=y
CONFIG_EISA_NAMES=y
CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_GSC_DINO=y
# CONFIG_PCI_LBA is not set
# CONFIG_CHASSIS_LCD_LED is not set
# CONFIG_PDC_CHASSIS is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_DEBUG_DRIVER=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_MEM_MAPPED=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_ZALON is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_INET_ECN=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_LASI_82596 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
CONFIG_NET_WIRELESS=y
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_GSCPS2=y
# CONFIG_HP_SDC is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_HIL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_HP_SDC_RTC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MUX is not set
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_MDA_CONSOLE is not set
CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_PARISC_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_INFO is not set
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
arch/parisc/configs/c3000_defconfig
View file @ fa9fcf5f
...@@ -23,6 +23,7 @@ CONFIG_SYSVIPC=y ...@@ -23,6 +23,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=16 CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y CONFIG_EMBEDDED=y
...@@ -71,7 +72,6 @@ CONFIG_IOMMU_SBA=y ...@@ -71,7 +72,6 @@ CONFIG_IOMMU_SBA=y
CONFIG_SUPERIO=y CONFIG_SUPERIO=y
# CONFIG_CHASSIS_LCD_LED is not set # CONFIG_CHASSIS_LCD_LED is not set
# CONFIG_PDC_CHASSIS is not set # CONFIG_PDC_CHASSIS is not set
CONFIG_HOTPLUG=y
# #
# PCMCIA/CardBus support # PCMCIA/CardBus support
...@@ -101,6 +101,7 @@ CONFIG_BINFMT_ELF=y ...@@ -101,6 +101,7 @@ CONFIG_BINFMT_ELF=y
# Generic Driver Options # Generic Driver Options
# #
CONFIG_FW_LOADER=y CONFIG_FW_LOADER=y
CONFIG_DEBUG_DRIVER=y
# #
# Memory Technology Devices (MTD) # Memory Technology Devices (MTD)
...@@ -128,7 +129,6 @@ CONFIG_BLK_DEV_LOOP=y ...@@ -128,7 +129,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# #
# ATA/ATAPI/MFM/RLL support # ATA/ATAPI/MFM/RLL support
...@@ -153,6 +153,7 @@ CONFIG_BLK_DEV_IDESCSI=y ...@@ -153,6 +153,7 @@ CONFIG_BLK_DEV_IDESCSI=y
# #
# IDE chipset support/bugfixes # IDE chipset support/bugfixes
# #
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_OFFBOARD is not set
...@@ -161,7 +162,6 @@ CONFIG_IDEPCI_SHARE_IRQ=y ...@@ -161,7 +162,6 @@ CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_ALI15X3 is not set
...@@ -252,11 +252,13 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 ...@@ -252,11 +252,13 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_QLOGIC_FC=m CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA2XXX_CONFIG=y CONFIG_SCSI_QLA2XXX=y
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA22XX is not set
CONFIG_SCSI_QLA23XX=m CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA6322=m
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_NSP32 is not set
...@@ -280,8 +282,9 @@ CONFIG_MD_RAID0=y ...@@ -280,8 +282,9 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y CONFIG_MD_RAID1=y
# CONFIG_MD_RAID5 is not set # CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set # CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set CONFIG_MD_MULTIPATH=y
# CONFIG_BLK_DEV_DM is not set CONFIG_BLK_DEV_DM=y
# CONFIG_DM_CRYPT is not set
# #
# Fusion MPT device support # Fusion MPT device support
...@@ -292,7 +295,7 @@ CONFIG_FUSION_ISENSE=m ...@@ -292,7 +295,7 @@ CONFIG_FUSION_ISENSE=m
CONFIG_FUSION_CTL=m CONFIG_FUSION_CTL=m
# #
# IEEE 1394 (FireWire) support (EXPERIMENTAL) # IEEE 1394 (FireWire) support
# #
# CONFIG_IEEE1394 is not set # CONFIG_IEEE1394 is not set
...@@ -301,6 +304,10 @@ CONFIG_FUSION_CTL=m ...@@ -301,6 +304,10 @@ CONFIG_FUSION_CTL=m
# #
# CONFIG_I2O is not set # CONFIG_I2O is not set
#
# Macintosh device drivers
#
# #
# Networking support # Networking support
# #
...@@ -457,6 +464,7 @@ CONFIG_DE2104X=m ...@@ -457,6 +464,7 @@ CONFIG_DE2104X=m
CONFIG_TULIP=y CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m CONFIG_DE4X5=m
CONFIG_WINBOND_840=m CONFIG_WINBOND_840=m
# CONFIG_DM9102 is not set # CONFIG_DM9102 is not set
...@@ -474,6 +482,7 @@ CONFIG_B44=m ...@@ -474,6 +482,7 @@ CONFIG_B44=m
CONFIG_EEPRO100=m CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set # CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m CONFIG_E100=m
# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set # CONFIG_FEALNX is not set
CONFIG_NATSEMI=m CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set # CONFIG_NE2K_PCI is not set
...@@ -483,6 +492,7 @@ CONFIG_8139TOO=m ...@@ -483,6 +492,7 @@ CONFIG_8139TOO=m
# CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set # CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set # CONFIG_8139_OLD_RX_RESET is not set
CONFIG_8139_RXBUF_IDX=1
# CONFIG_SIS900 is not set # CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set # CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE is not set
...@@ -571,7 +581,7 @@ CONFIG_PCMCIA_AXNET=m ...@@ -571,7 +581,7 @@ CONFIG_PCMCIA_AXNET=m
# #
# ISDN subsystem # ISDN subsystem
# #
# CONFIG_ISDN_BOOL is not set # CONFIG_ISDN is not set
# #
# Telephony Support # Telephony Support
...@@ -652,7 +662,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y ...@@ -652,7 +662,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256 CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# #
# Mice # Mice
...@@ -695,6 +706,10 @@ CONFIG_MAX_RAW_DEVS=256 ...@@ -695,6 +706,10 @@ CONFIG_MAX_RAW_DEVS=256
# #
# CONFIG_I2C is not set # CONFIG_I2C is not set
#
# Misc devices
#
# #
# Multimedia devices # Multimedia devices
# #
...@@ -716,6 +731,7 @@ CONFIG_FB=y ...@@ -716,6 +731,7 @@ CONFIG_FB=y
CONFIG_FB_STI=y CONFIG_FB_STI=y
# CONFIG_FB_RIVA is not set # CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set # CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set # CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set # CONFIG_FB_ATY is not set
...@@ -731,7 +747,6 @@ CONFIG_FB_STI=y ...@@ -731,7 +747,6 @@ CONFIG_FB_STI=y
# #
# Console display driver support # Console display driver support
# #
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set # CONFIG_MDA_CONSOLE is not set
CONFIG_STI_CONSOLE=y CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_COLUMNS=160
...@@ -823,7 +838,6 @@ CONFIG_USB_KBTAB=m ...@@ -823,7 +838,6 @@ CONFIG_USB_KBTAB=m
# USB Imaging devices # USB Imaging devices
# #
CONFIG_USB_MDC800=m CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m CONFIG_USB_HPUSBSCSI=m
...@@ -867,6 +881,10 @@ CONFIG_USB_LEGOTOWER=m ...@@ -867,6 +881,10 @@ CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set # CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set # CONFIG_USB_LED is not set
# CONFIG_USB_TEST is not set # CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set # CONFIG_USB_GADGET is not set
# #
...@@ -883,6 +901,7 @@ CONFIG_JBD=y ...@@ -883,6 +901,7 @@ CONFIG_JBD=y
CONFIG_XFS_FS=m CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set # CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set # CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set # CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set # CONFIG_ROMFS_FS is not set
...@@ -912,7 +931,6 @@ CONFIG_VFAT_FS=m ...@@ -912,7 +931,6 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_FS=y CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLBFS is not set
...@@ -925,6 +943,7 @@ CONFIG_RAMFS=y ...@@ -925,6 +943,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set # CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set # CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set # CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set # CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set # CONFIG_EFS_FS is not set
...@@ -1046,6 +1065,7 @@ CONFIG_CRYPTO_SERPENT=m ...@@ -1046,6 +1065,7 @@ CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_TEST=m
......
arch/parisc/defconfig
View file @ fa9fcf5f
...@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y ...@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15 CONFIG_LOG_BUF_SHIFT=15
# CONFIG_HOTPLUG is not set
CONFIG_IKCONFIG=y CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set # CONFIG_EMBEDDED is not set
...@@ -31,6 +32,7 @@ CONFIG_EPOLL=y ...@@ -31,6 +32,7 @@ CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# #
# Loadable module support # Loadable module support
...@@ -71,7 +73,6 @@ CONFIG_IOMMU_SBA=y ...@@ -71,7 +73,6 @@ CONFIG_IOMMU_SBA=y
CONFIG_SUPERIO=y CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y CONFIG_CHASSIS_LCD_LED=y
CONFIG_PDC_CHASSIS=y CONFIG_PDC_CHASSIS=y
# CONFIG_HOTPLUG is not set
# #
# Executable file formats # Executable file formats
...@@ -86,6 +87,7 @@ CONFIG_BINFMT_ELF=y ...@@ -86,6 +87,7 @@ CONFIG_BINFMT_ELF=y
# #
# Generic Driver Options # Generic Driver Options
# #
# CONFIG_DEBUG_DRIVER is not set
# #
# Memory Technology Devices (MTD) # Memory Technology Devices (MTD)
...@@ -108,7 +110,6 @@ CONFIG_PARPORT_GSC=y ...@@ -108,7 +110,6 @@ CONFIG_PARPORT_GSC=y
# #
# Plug and Play support # Plug and Play support
# #
# CONFIG_PNP is not set
# #
# Block devices # Block devices
...@@ -195,8 +196,16 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20 ...@@ -195,8 +196,16 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DEBUG is not set
...@@ -209,6 +218,7 @@ CONFIG_MD_LINEAR=y ...@@ -209,6 +218,7 @@ CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set # CONFIG_BLK_DEV_DM is not set
...@@ -218,7 +228,7 @@ CONFIG_MD_RAID5=y ...@@ -218,7 +228,7 @@ CONFIG_MD_RAID5=y
# CONFIG_FUSION is not set # CONFIG_FUSION is not set
# #
# IEEE 1394 (FireWire) support (EXPERIMENTAL) # IEEE 1394 (FireWire) support
# #
# CONFIG_IEEE1394 is not set # CONFIG_IEEE1394 is not set
...@@ -227,6 +237,10 @@ CONFIG_MD_RAID5=y ...@@ -227,6 +237,10 @@ CONFIG_MD_RAID5=y
# #
# CONFIG_I2O is not set # CONFIG_I2O is not set
#
# Macintosh device drivers
#
# #
# Networking support # Networking support
# #
...@@ -319,6 +333,7 @@ CONFIG_NET_TULIP=y ...@@ -319,6 +333,7 @@ CONFIG_NET_TULIP=y
CONFIG_TULIP=y CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set # CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set # CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set # CONFIG_DM9102 is not set
...@@ -330,6 +345,7 @@ CONFIG_NET_PCI=y ...@@ -330,6 +345,7 @@ CONFIG_NET_PCI=y
# CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set # CONFIG_AC3200 is not set
# CONFIG_B44 is not set # CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set # CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set # CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set # CONFIG_E100 is not set
...@@ -386,6 +402,7 @@ CONFIG_NET_RADIO=y ...@@ -386,6 +402,7 @@ CONFIG_NET_RADIO=y
# #
CONFIG_AIRO=y CONFIG_AIRO=y
# CONFIG_HERMES is not set # CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
CONFIG_NET_WIRELESS=y CONFIG_NET_WIRELESS=y
# #
...@@ -419,7 +436,7 @@ CONFIG_NET_WIRELESS=y ...@@ -419,7 +436,7 @@ CONFIG_NET_WIRELESS=y
# #
# ISDN subsystem # ISDN subsystem
# #
# CONFIG_ISDN_BOOL is not set # CONFIG_ISDN is not set
# #
# Telephony Support # Telephony Support
...@@ -450,10 +467,10 @@ CONFIG_INPUT_EVDEV=y ...@@ -450,10 +467,10 @@ CONFIG_INPUT_EVDEV=y
CONFIG_SOUND_GAMEPORT=y CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_GSCPS2=y
CONFIG_HP_SDC=y CONFIG_HP_SDC=y
# CONFIG_HIL_MLC is not set CONFIG_HIL_MLC=y
# CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_PCIPS2 is not set
# #
...@@ -464,10 +481,11 @@ CONFIG_INPUT_KEYBOARD=y ...@@ -464,10 +481,11 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_HIL_OLD is not set CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_HIL is not set
CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_WARRIOR is not set
...@@ -485,7 +503,6 @@ CONFIG_INPUT_TOUCHSCREEN=y ...@@ -485,7 +503,6 @@ CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_UINPUT is not set # CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_GSC=y
CONFIG_HP_SDC_RTC=y CONFIG_HP_SDC_RTC=y
# #
...@@ -517,30 +534,13 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y ...@@ -517,30 +534,13 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256 CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set # CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set # CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set # CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Algorithms
#
#
# I2C Hardware Bus support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# #
# Mice # Mice
# #
...@@ -571,6 +571,15 @@ CONFIG_GEN_RTC=y ...@@ -571,6 +571,15 @@ CONFIG_GEN_RTC=y
# CONFIG_DRM is not set # CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set # CONFIG_RAW_DRIVER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
# #
# Multimedia devices # Multimedia devices
# #
...@@ -585,16 +594,19 @@ CONFIG_GEN_RTC=y ...@@ -585,16 +594,19 @@ CONFIG_GEN_RTC=y
# Graphics support # Graphics support
# #
CONFIG_FB=y CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set # CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set # CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y CONFIG_FB_STI=y
# CONFIG_FB_RIVA is not set # CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set # CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set # CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set # CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set # CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set # CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set # CONFIG_FB_TRIDENT is not set
...@@ -603,7 +615,6 @@ CONFIG_FB_STI=y ...@@ -603,7 +615,6 @@ CONFIG_FB_STI=y
# #
# Console display driver support # Console display driver support
# #
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set # CONFIG_MDA_CONSOLE is not set
CONFIG_STI_CONSOLE=y CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_COLUMNS=160
...@@ -686,7 +697,6 @@ CONFIG_USB_OHCI_HCD=y ...@@ -686,7 +697,6 @@ CONFIG_USB_OHCI_HCD=y
# USB Imaging devices # USB Imaging devices
# #
# CONFIG_USB_MDC800 is not set # CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set # CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set # CONFIG_USB_HPUSBSCSI is not set
...@@ -721,11 +731,19 @@ CONFIG_USB_OHCI_HCD=y ...@@ -721,11 +731,19 @@ CONFIG_USB_OHCI_HCD=y
# #
# USB Miscellaneous drivers # USB Miscellaneous drivers
# #
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set # CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set # CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_BRLVGER is not set # CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set # CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set # CONFIG_USB_GADGET is not set
# #
...@@ -766,7 +784,6 @@ CONFIG_JOLIET=y ...@@ -766,7 +784,6 @@ CONFIG_JOLIET=y
CONFIG_PROC_FS=y CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set # CONFIG_HUGETLB_PAGE is not set
...@@ -778,6 +795,7 @@ CONFIG_RAMFS=y ...@@ -778,6 +795,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set # CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set # CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set # CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set # CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set # CONFIG_EFS_FS is not set
...@@ -809,7 +827,6 @@ CONFIG_SUNRPC=y ...@@ -809,7 +827,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set # CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set # CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set # CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set # CONFIG_AFS_FS is not set
# #
...@@ -817,11 +834,11 @@ CONFIG_SUNRPC=y ...@@ -817,11 +834,11 @@ CONFIG_SUNRPC=y
# #
# CONFIG_PARTITION_ADVANCED is not set # CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
# #
# Native Language Support # Native Language Support
# #
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_737 is not set
...@@ -899,6 +916,7 @@ CONFIG_CRYPTO=y ...@@ -899,6 +916,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_TEST is not set
......
arch/parisc/hpux/entry_hpux.S
View file @ fa9fcf5f
/* /* syscall table for HPUX specific syscalls
* *
* Linux/PARISC Project (http://www.parisc-linux.org/) * Linux/PA-RISC Project (http://www.parisc-linux.org/)
* Copyright (C) 1999 Matthew Wilcox <willy at debian . org>
* *
* modified by Matthew Wilcox <willy@bofh.ai> 1999-07-26 * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/ */
#include <linux/sys.h> #include <linux/sys.h>
#include <linux/linkage.h> #include <linux/linkage.h>
#include <asm/unistd.h> #include <asm/unistd.h>
......
arch/parisc/kernel/entry.S
View file @ fa9fcf5f
...@@ -533,7 +533,7 @@ __kernel_thread: ...@@ -533,7 +533,7 @@ __kernel_thread:
ldil L%CLONE_UNTRACED, %r26 ldil L%CLONE_UNTRACED, %r26
ldo CLONE_VM(%r26), %r26 /* Force CLONE_VM since only init_mm */ ldo CLONE_VM(%r26), %r26 /* Force CLONE_VM since only init_mm */
or %r26, %r24, %r26 /* will have kernel mappings. */ or %r26, %r24, %r26 /* will have kernel mappings. */
copy %r0, %r25 /* stack_start */ ldi 1, %r25 /* stack_start, signals kernel thread */
stw %r0, -52(%r30) /* user_tid */ stw %r0, -52(%r30) /* user_tid */
#ifdef __LP64__ #ifdef __LP64__
ldo -16(%r30),%r29 /* Reference param save area */ ldo -16(%r30),%r29 /* Reference param save area */
......
arch/parisc/kernel/hardware.c
View file @ fa9fcf5f
...@@ -333,8 +333,9 @@ static struct hp_hardware hp_hardware_list[] __initdata = { ...@@ -333,8 +333,9 @@ static struct hp_hardware hp_hardware_list[] __initdata = {
{HPHW_A_DMA, 0x01F, 0x00089, 0x80, "SkyHawk 100/120 FW-SCSI"}, {HPHW_A_DMA, 0x01F, 0x00089, 0x80, "SkyHawk 100/120 FW-SCSI"},
{HPHW_A_DMA, 0x027, 0x00089, 0x80, "Piranha 100 FW-SCSI"}, {HPHW_A_DMA, 0x027, 0x00089, 0x80, "Piranha 100 FW-SCSI"},
{HPHW_A_DMA, 0x032, 0x00089, 0x80, "Raven T' Core FW-SCSI"}, {HPHW_A_DMA, 0x032, 0x00089, 0x80, "Raven T' Core FW-SCSI"},
{HPHW_A_DMA, 0x03b, 0x00089, 0x80, "Raven U/L2 Core FW-SCSI"}, {HPHW_A_DMA, 0x03B, 0x00089, 0x80, "Raven U/L2 Core FW-SCSI"},
{HPHW_A_DMA, 0x03d, 0x00089, 0x80, "Merlin 160 Core FW-SCSI"}, {HPHW_A_DMA, 0x03C, 0x00089, 0x80, "Merlin 132 Core FW-SCSI"},
{HPHW_A_DMA, 0x03D, 0x00089, 0x80, "Merlin 160 Core FW-SCSI"},
{HPHW_A_DMA, 0x044, 0x00089, 0x80, "Mohawk Core FW-SCSI"}, {HPHW_A_DMA, 0x044, 0x00089, 0x80, "Mohawk Core FW-SCSI"},
{HPHW_A_DMA, 0x051, 0x00089, 0x80, "Firehawk FW-SCSI"}, {HPHW_A_DMA, 0x051, 0x00089, 0x80, "Firehawk FW-SCSI"},
{HPHW_A_DMA, 0x058, 0x00089, 0x80, "FireHawk 200 FW-SCSI"}, {HPHW_A_DMA, 0x058, 0x00089, 0x80, "FireHawk 200 FW-SCSI"},
......
arch/parisc/kernel/head64.S
View file @ fa9fcf5f
...@@ -165,9 +165,9 @@ common_stext: ...@@ -165,9 +165,9 @@ common_stext:
#endif /* CONFIG_SMP */ #endif /* CONFIG_SMP */
/* Save the rfi target address */ /* Save the rfi target address */
ldo -THREAD_SZ_ALGN(%sp), %r1 ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10
ldd TI_TASK(%r1), %r1 tophys_r1 %r10
std %r11, TASK_PT_GR11(%r1) std %r11, TASK_PT_GR11(%r10)
#ifndef CONFIG_PDC_NARROW #ifndef CONFIG_PDC_NARROW
/* Switch to wide mode; Superdome doesn't support narrow PDC /* Switch to wide mode; Superdome doesn't support narrow PDC
...@@ -197,9 +197,9 @@ common_stext: ...@@ -197,9 +197,9 @@ common_stext:
stext_pdc_ret: stext_pdc_ret:
/* restore rfi target address*/ /* restore rfi target address*/
ldo -THREAD_SZ_ALGN(%sp), %r1 ldd TI_TASK-THREAD_SZ_ALGN(%sp), %r10
ldd TI_TASK(%r1), %r1 tophys_r1 %r10
ldd TASK_PT_GR11(%r1), %r11 ldd TASK_PT_GR11(%r10), %r11
/* PARANOID: clear user scratch/user space SR's */ /* PARANOID: clear user scratch/user space SR's */
mtsp %r0,%sr0 mtsp %r0,%sr0
...@@ -302,6 +302,7 @@ smp_slave_stext: ...@@ -302,6 +302,7 @@ smp_slave_stext:
/* Initialize the SP - monarch sets up smp_init_current_idle_task */ /* Initialize the SP - monarch sets up smp_init_current_idle_task */
load32 PA(smp_init_current_idle_task),%sp load32 PA(smp_init_current_idle_task),%sp
ldd 0(%sp),%sp /* load task address */ ldd 0(%sp),%sp /* load task address */
ldd TASK_THREAD_INFO(%sp), %sp
mtctl %sp,%cr30 /* store in cr30 */ mtctl %sp,%cr30 /* store in cr30 */
ldo THREAD_SZ_ALGN(%sp),%sp ldo THREAD_SZ_ALGN(%sp),%sp
tophys_r1 %sp tophys_r1 %sp
......
arch/parisc/kernel/module.c
View file @ fa9fcf5f
/* Kernel module help for parisc. /* Kernel dynamically loadable module help for PARISC.
*
This program is free software; you can redistribute it and/or modify * The best reference for this stuff is probably the Processor-
it under the terms of the GNU General Public License as published by * Specific ELF Supplement for PA-RISC:
the Free Software Foundation; either version 2 of the License, or * http://ftp.parisc-linux.org/docs/elf-pa-hp.pdf
(at your option) any later version. *
* Linux/PA-RISC Project (http://www.parisc-linux.org/)
This program is distributed in the hope that it will be useful, * Copyright (C) 2003 Randolph Chung <tausq at debian . org>
but WITHOUT ANY WARRANTY; without even the implied warranty of *
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
GNU General Public License for more details. * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
You should have received a copy of the GNU General Public License * the Free Software Foundation; either version 2 of the License, or
along with this program; if not, write to the Free Software * (at your option) any later version.
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA *
* This program is distributed in the hope that it will be useful,
(c) 2003 Randolph Chung <tausq@debian.org> * but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
The best reference for this stuff is probably the Processor-
Specific ELF Supplement for PA-RISC:
http://ftp.parisc-linux.org/docs/elf-pa-hp.pdf
*/
#include <linux/moduleloader.h> #include <linux/moduleloader.h>
#include <linux/elf.h> #include <linux/elf.h>
#include <linux/vmalloc.h> #include <linux/vmalloc.h>
......
arch/parisc/kernel/pacache.S
View file @ fa9fcf5f
...@@ -221,6 +221,7 @@ flush_instruction_cache_local: ...@@ -221,6 +221,7 @@ flush_instruction_cache_local:
LDREG ICACHE_STRIDE(%r1),%arg1 LDREG ICACHE_STRIDE(%r1),%arg1
LDREG ICACHE_COUNT(%r1),%arg2 LDREG ICACHE_COUNT(%r1),%arg2
LDREG ICACHE_LOOP(%r1),%arg3 LDREG ICACHE_LOOP(%r1),%arg3
rsm PSW_SM_I,%r22 /* No mmgt ops during loop*/
ADDIB= -1,%arg3,fioneloop /* Preadjust and test */ ADDIB= -1,%arg3,fioneloop /* Preadjust and test */
movb,<,n %arg3,%r31,fisync /* If loop < 0, do sync */ movb,<,n %arg3,%r31,fisync /* If loop < 0, do sync */
...@@ -237,6 +238,7 @@ fioneloop: /* Loop if LOOP = 1 */ ...@@ -237,6 +238,7 @@ fioneloop: /* Loop if LOOP = 1 */
fisync: fisync:
sync sync
mtsm %r22
bv %r0(%r2) bv %r0(%r2)
nop nop
.exit .exit
......
arch/parisc/kernel/parisc_ksyms.c
View file @ fa9fcf5f
...@@ -67,8 +67,10 @@ EXPORT_SYMBOL(__cmpxchg_u64); ...@@ -67,8 +67,10 @@ EXPORT_SYMBOL(__cmpxchg_u64);
#include <asm/uaccess.h> #include <asm/uaccess.h>
EXPORT_SYMBOL(lcopy_to_user); EXPORT_SYMBOL(lcopy_to_user);
EXPORT_SYMBOL(lcopy_from_user); EXPORT_SYMBOL(lcopy_from_user);
EXPORT_SYMBOL(lstrnlen_user); EXPORT_SYMBOL(lcopy_in_user);
EXPORT_SYMBOL(lstrncpy_from_user);
EXPORT_SYMBOL(lclear_user); EXPORT_SYMBOL(lclear_user);
EXPORT_SYMBOL(lstrnlen_user);
#ifndef __LP64__ #ifndef __LP64__
/* Needed so insmod can set dp value */ /* Needed so insmod can set dp value */
......
arch/parisc/kernel/pci.c
View file @ fa9fcf5f
...@@ -21,6 +21,7 @@ ...@@ -21,6 +21,7 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/cache.h> /* for L1_CACHE_BYTES */ #include <asm/cache.h> /* for L1_CACHE_BYTES */
#include <asm/superio.h>
#define DEBUG_RESOURCES 0 #define DEBUG_RESOURCES 0
#define DEBUG_CONFIG 0 #define DEBUG_CONFIG 0
...@@ -145,9 +146,13 @@ char *pcibios_setup(char *str) ...@@ -145,9 +146,13 @@ char *pcibios_setup(char *str)
return str; return str;
} }
/* Used in drivers/pci/quirks.c */ /* Used in drivers/pci/quirks.c */
struct pci_fixup pcibios_fixups[] = { {0} }; struct pci_fixup pcibios_fixups[] = {
#ifdef CONFIG_SUPERIO
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci },
#endif
{ 0 }
};
/* /*
......
arch/parisc/kernel/process.c
View file @ fa9fcf5f
...@@ -250,6 +250,16 @@ sys_clone(unsigned long clone_flags, unsigned long usp, ...@@ -250,6 +250,16 @@ sys_clone(unsigned long clone_flags, unsigned long usp,
struct pt_regs *regs) struct pt_regs *regs)
{ {
int *user_tid = (int *)regs->gr[26]; int *user_tid = (int *)regs->gr[26];
/* usp must be word aligned. This also prevents users from
* passing in the value 1 (which is the signal for a special
* return for a kernel thread) */
usp = ALIGN(usp, 4);
/* A zero value for usp means use the current stack */
if(usp == 0)
usp = regs->gr[30];
return do_fork(clone_flags & ~CLONE_IDLETASK, usp, regs, 0, user_tid, NULL); return do_fork(clone_flags & ~CLONE_IDLETASK, usp, regs, 0, user_tid, NULL);
} }
...@@ -290,7 +300,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, ...@@ -290,7 +300,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
* We rely on the fact that kernel_thread passes * We rely on the fact that kernel_thread passes
* in zero for usp. * in zero for usp.
*/ */
if (usp == 0) { if (usp == 1) {
/* kernel thread */ /* kernel thread */
cregs->ksp = (((unsigned long)(ti)) + THREAD_SZ_ALGN); cregs->ksp = (((unsigned long)(ti)) + THREAD_SZ_ALGN);
/* Must exit via ret_from_kernel_thread in order /* Must exit via ret_from_kernel_thread in order
......
arch/parisc/kernel/vmlinux.lds.S
View file @ fa9fcf5f
...@@ -61,6 +61,9 @@ SECTIONS ...@@ -61,6 +61,9 @@ SECTIONS
RODATA RODATA
/* writeable */ /* writeable */
. = ALIGN(4096); /* Make sure this is paged aligned so
that we can properly leave these
as writable */
data_start = .; data_start = .;
. = ALIGN(16); /* Exception table */ . = ALIGN(16); /* Exception table */
......
drivers/parisc/ccio-dma.c
View file @ fa9fcf5f
...@@ -38,9 +38,8 @@ ...@@ -38,9 +38,8 @@
#include <linux/spinlock.h> #include <linux/spinlock.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/string.h> #include <linux/string.h>
#define PCI_DEBUG
#include <linux/pci.h> #include <linux/pci.h>
#undef PCI_DEBUG #include <linux/reboot.h>
#include <asm/byteorder.h> #include <asm/byteorder.h>
#include <asm/cache.h> /* for L1_CACHE_BYTES */ #include <asm/cache.h> /* for L1_CACHE_BYTES */
...@@ -63,6 +62,18 @@ ...@@ -63,6 +62,18 @@
#undef DEBUG_CCIO_INIT #undef DEBUG_CCIO_INIT
#undef DEBUG_CCIO_RUN_SG #undef DEBUG_CCIO_RUN_SG
#ifdef CONFIG_PROC_FS
/*
* CCIO_SEARCH_TIME can help measure how fast the bitmap search is.
* impacts performance though - ditch it if you don't use it.
*/
#define CCIO_SEARCH_TIME
#undef CCIO_MAP_STATS
#else
#undef CCIO_SEARCH_TIME
#undef CCIO_MAP_STATS
#endif
#include <linux/proc_fs.h> #include <linux/proc_fs.h>
#include <asm/runway.h> /* for proc_runway_root */ #include <asm/runway.h> /* for proc_runway_root */
...@@ -219,15 +230,18 @@ struct ioc { ...@@ -219,15 +230,18 @@ struct ioc {
struct ioa_registers *ioc_hpa; /* I/O MMU base address */ struct ioa_registers *ioc_hpa; /* I/O MMU base address */
u8 *res_map; /* resource map, bit == pdir entry */ u8 *res_map; /* resource map, bit == pdir entry */
u64 *pdir_base; /* physical base address */ u64 *pdir_base; /* physical base address */
u32 pdir_size; /* bytes, function of IOV Space size */
u32 res_hint; /* next available IOVP - u32 res_hint; /* next available IOVP -
circular search */ circular search */
u32 res_size; /* size of resource map in bytes */ u32 res_size; /* size of resource map in bytes */
spinlock_t res_lock; spinlock_t res_lock;
#ifdef CONFIG_PROC_FS #ifdef CCIO_SEARCH_TIME
#define CCIO_SEARCH_SAMPLE 0x100 #define CCIO_SEARCH_SAMPLE 0x100
unsigned long avg_search[CCIO_SEARCH_SAMPLE]; unsigned long avg_search[CCIO_SEARCH_SAMPLE];
unsigned long avg_idx; /* current index into avg_search */ unsigned long avg_idx; /* current index into avg_search */
#endif
#ifdef CCIO_MAP_STATS
unsigned long used_pages; unsigned long used_pages;
unsigned long msingle_calls; unsigned long msingle_calls;
unsigned long msingle_pages; unsigned long msingle_pages;
...@@ -237,12 +251,10 @@ struct ioc { ...@@ -237,12 +251,10 @@ struct ioc {
unsigned long usingle_pages; unsigned long usingle_pages;
unsigned long usg_calls; unsigned long usg_calls;
unsigned long usg_pages; unsigned long usg_pages;
unsigned short cujo20_bug;
#endif #endif
unsigned short cujo20_bug;
/* STUFF We don't need in performance path */ /* STUFF We don't need in performance path */
u32 pdir_size; /* in bytes, determined by IOV Space size */
u32 chainid_shift; /* specify bit location of chain_id */ u32 chainid_shift; /* specify bit location of chain_id */
struct ioc *next; /* Linked list of discovered iocs */ struct ioc *next; /* Linked list of discovered iocs */
const char *name; /* device name from firmware */ const char *name; /* device name from firmware */
...@@ -289,11 +301,11 @@ static int ioc_count; ...@@ -289,11 +301,11 @@ static int ioc_count;
** If the search wraps around, and passes the res_hint, it will ** If the search wraps around, and passes the res_hint, it will
** cause the kernel to panic anyhow. ** cause the kernel to panic anyhow.
*/ */
#define CCIO_SEARCH_LOOP(ioc, res_idx, mask_ptr, size) \ #define CCIO_SEARCH_LOOP(ioc, res_idx, mask, size) \
for(; res_ptr < res_end; ++res_ptr) { \ for(; res_ptr < res_end; ++res_ptr) { \
if(0 == (*res_ptr & *mask_ptr)) { \ if(0 == (*res_ptr & mask)) { \
*res_ptr |= *mask_ptr; \ *res_ptr |= mask; \
res_idx = (int)((unsigned long)res_ptr - (unsigned long)ioc->res_map); \ res_idx = (unsigned int)((unsigned long)res_ptr - (unsigned long)ioc->res_map); \
ioc->res_hint = res_idx + (size >> 3); \ ioc->res_hint = res_idx + (size >> 3); \
goto resource_found; \ goto resource_found; \
} \ } \
...@@ -302,10 +314,9 @@ static int ioc_count; ...@@ -302,10 +314,9 @@ static int ioc_count;
#define CCIO_FIND_FREE_MAPPING(ioa, res_idx, mask, size) \ #define CCIO_FIND_FREE_MAPPING(ioa, res_idx, mask, size) \
u##size *res_ptr = (u##size *)&((ioc)->res_map[ioa->res_hint & ~((size >> 3) - 1)]); \ u##size *res_ptr = (u##size *)&((ioc)->res_map[ioa->res_hint & ~((size >> 3) - 1)]); \
u##size *res_end = (u##size *)&(ioc)->res_map[ioa->res_size]; \ u##size *res_end = (u##size *)&(ioc)->res_map[ioa->res_size]; \
u##size *mask_ptr = (u##size *)&mask; \ CCIO_SEARCH_LOOP(ioc, res_idx, mask, size); \
CCIO_SEARCH_LOOP(ioc, res_idx, mask_ptr, size); \
res_ptr = (u##size *)&(ioc)->res_map[0]; \ res_ptr = (u##size *)&(ioc)->res_map[0]; \
CCIO_SEARCH_LOOP(ioa, res_idx, mask_ptr, size); CCIO_SEARCH_LOOP(ioa, res_idx, mask, size);
/* /*
** Find available bit in this ioa's resource map. ** Find available bit in this ioa's resource map.
...@@ -331,40 +342,51 @@ static int ioc_count; ...@@ -331,40 +342,51 @@ static int ioc_count;
* of available pages for the requested size. * of available pages for the requested size.
*/ */
static int static int
ccio_alloc_range(struct ioc *ioc, unsigned long pages_needed) ccio_alloc_range(struct ioc *ioc, size_t size)
{ {
int res_idx; unsigned int pages_needed = size >> IOVP_SHIFT;
unsigned long mask; unsigned int res_idx;
#ifdef CONFIG_PROC_FS #ifdef CCIO_SEARCH_TIME
unsigned long cr_start = mfctl(16); unsigned long cr_start = mfctl(16);
#endif #endif
ASSERT(pages_needed); BUG_ON(pages_needed == 0);
ASSERT((pages_needed * IOVP_SIZE) <= DMA_CHUNK_SIZE); BUG_ON((pages_needed * IOVP_SIZE) > DMA_CHUNK_SIZE);
ASSERT(pages_needed <= BITS_PER_LONG);
mask = ~(~0UL >> pages_needed);
DBG_RES("%s() size: %d pages_needed %d mask 0x%08lx\n", DBG_RES("%s() size: %d pages_needed %d\n",
__FUNCTION__, size, pages_needed, mask); __FUNCTION__, size, pages_needed);
/* /*
** "seek and ye shall find"...praying never hurts either... ** "seek and ye shall find"...praying never hurts either...
** ggg sacrifices another 710 to the computer gods. ** ggg sacrifices another 710 to the computer gods.
*/ */
if(pages_needed <= 8) { if (pages_needed <= 8) {
/*
* LAN traffic will not thrash the TLB IFF the same NIC
* uses 8 adjacent pages to map seperate payload data.
* ie the same byte in the resource bit map.
*/
#if 0
/* FIXME: bit search should shift it's way through
* an unsigned long - not byte at a time. As it is now,
* we effectively allocate this byte to this mapping.
*/
unsigned long mask = ~(~0UL >> pages_needed);
CCIO_FIND_FREE_MAPPING(ioc, res_idx, mask, 8); CCIO_FIND_FREE_MAPPING(ioc, res_idx, mask, 8);
} else if(pages_needed <= 16) { #else
CCIO_FIND_FREE_MAPPING(ioc, res_idx, mask, 16); CCIO_FIND_FREE_MAPPING(ioc, res_idx, 0xff, 8);
} else if(pages_needed <= 32) { #endif
CCIO_FIND_FREE_MAPPING(ioc, res_idx, mask, 32); } else if (pages_needed <= 16) {
CCIO_FIND_FREE_MAPPING(ioc, res_idx, 0xffff, 16);
} else if (pages_needed <= 32) {
CCIO_FIND_FREE_MAPPING(ioc, res_idx, ~(unsigned int)0, 32);
#ifdef __LP64__ #ifdef __LP64__
} else if(pages_needed <= 64) { } else if (pages_needed <= 64) {
CCIO_FIND_FREE_MAPPING(ioc, res_idx, mask, 64); CCIO_FIND_FREE_MAPPING(ioc, res_idx, ~0UL, 64);
#endif #endif
} else { } else {
panic("%s: %s() Too many pages to map. pages_needed: %ld\n", panic("%s: %s() Too many pages to map. pages_needed: %u\n",
__FILE__, __FUNCTION__, pages_needed); __FILE__, __FUNCTION__, pages_needed);
} }
...@@ -373,10 +395,10 @@ ccio_alloc_range(struct ioc *ioc, unsigned long pages_needed) ...@@ -373,10 +395,10 @@ ccio_alloc_range(struct ioc *ioc, unsigned long pages_needed)
resource_found: resource_found:
DBG_RES("%s() res_idx %d mask 0x%08lx res_hint: %d\n", DBG_RES("%s() res_idx %d res_hint: %d\n",
__FUNCTION__, res_idx, mask, ioc->res_hint); __FUNCTION__, res_idx, ioc->res_hint);
#ifdef CONFIG_PROC_FS #ifdef CCIO_SEARCH_TIME
{ {
unsigned long cr_end = mfctl(16); unsigned long cr_end = mfctl(16);
unsigned long tmp = cr_end - cr_start; unsigned long tmp = cr_end - cr_start;
...@@ -385,10 +407,10 @@ ccio_alloc_range(struct ioc *ioc, unsigned long pages_needed) ...@@ -385,10 +407,10 @@ ccio_alloc_range(struct ioc *ioc, unsigned long pages_needed)
} }
ioc->avg_search[ioc->avg_idx++] = cr_start; ioc->avg_search[ioc->avg_idx++] = cr_start;
ioc->avg_idx &= CCIO_SEARCH_SAMPLE - 1; ioc->avg_idx &= CCIO_SEARCH_SAMPLE - 1;
#endif
#ifdef CCIO_MAP_STATS
ioc->used_pages += pages_needed; ioc->used_pages += pages_needed;
#endif #endif
/* /*
** return the bit address. ** return the bit address.
*/ */
...@@ -397,9 +419,8 @@ ccio_alloc_range(struct ioc *ioc, unsigned long pages_needed) ...@@ -397,9 +419,8 @@ ccio_alloc_range(struct ioc *ioc, unsigned long pages_needed)
#define CCIO_FREE_MAPPINGS(ioc, res_idx, mask, size) \ #define CCIO_FREE_MAPPINGS(ioc, res_idx, mask, size) \
u##size *res_ptr = (u##size *)&((ioc)->res_map[res_idx]); \ u##size *res_ptr = (u##size *)&((ioc)->res_map[res_idx]); \
u##size *mask_ptr = (u##size *)&mask; \ BUG_ON((*res_ptr & mask) != mask); \
ASSERT((*res_ptr & *mask_ptr) == *mask_ptr); \ *res_ptr &= ~(mask);
*res_ptr &= ~(*mask_ptr);
/** /**
* ccio_free_range - Free pages from the ioc's resource map. * ccio_free_range - Free pages from the ioc's resource map.
...@@ -413,32 +434,35 @@ ccio_alloc_range(struct ioc *ioc, unsigned long pages_needed) ...@@ -413,32 +434,35 @@ ccio_alloc_range(struct ioc *ioc, unsigned long pages_needed)
static void static void
ccio_free_range(struct ioc *ioc, dma_addr_t iova, unsigned long pages_mapped) ccio_free_range(struct ioc *ioc, dma_addr_t iova, unsigned long pages_mapped)
{ {
unsigned long mask;
unsigned long iovp = CCIO_IOVP(iova); unsigned long iovp = CCIO_IOVP(iova);
unsigned int res_idx = PDIR_INDEX(iovp) >> 3; unsigned int res_idx = PDIR_INDEX(iovp) >> 3;
ASSERT(pages_mapped); BUG_ON(pages_mapped == 0);
ASSERT((pages_mapped * IOVP_SIZE) <= DMA_CHUNK_SIZE); BUG_ON((pages_mapped * IOVP_SIZE) > DMA_CHUNK_SIZE);
ASSERT(pages_mapped <= BITS_PER_LONG); BUG_ON(pages_mapped > BITS_PER_LONG);
mask = ~(~0UL >> pages_mapped);
DBG_RES("%s(): res_idx: %d pages_mapped %d mask 0x%08lx\n", DBG_RES("%s(): res_idx: %d pages_mapped %d\n",
__FUNCTION__, res_idx, pages_mapped, mask); __FUNCTION__, res_idx, pages_mapped);
#ifdef CONFIG_PROC_FS #ifdef CCIO_MAP_STATS
ioc->used_pages -= pages_mapped; ioc->used_pages -= pages_mapped;
#endif #endif
if(pages_mapped <= 8) { if(pages_mapped <= 8) {
#if 0
/* see matching comments in alloc_range */
unsigned long mask = ~(~0UL >> pages_mapped);
CCIO_FREE_MAPPINGS(ioc, res_idx, mask, 8); CCIO_FREE_MAPPINGS(ioc, res_idx, mask, 8);
#else
CCIO_FREE_MAPPINGS(ioc, res_idx, 0xff, 8);
#endif
} else if(pages_mapped <= 16) { } else if(pages_mapped <= 16) {
CCIO_FREE_MAPPINGS(ioc, res_idx, mask, 16); CCIO_FREE_MAPPINGS(ioc, res_idx, 0xffff, 16);
} else if(pages_mapped <= 32) { } else if(pages_mapped <= 32) {
CCIO_FREE_MAPPINGS(ioc, res_idx, mask, 32); CCIO_FREE_MAPPINGS(ioc, res_idx, ~(unsigned int)0, 32);
#ifdef __LP64__ #ifdef __LP64__
} else if(pages_mapped <= 64) { } else if(pages_mapped <= 64) {
CCIO_FREE_MAPPINGS(ioc, res_idx, mask, 64); CCIO_FREE_MAPPINGS(ioc, res_idx, ~0UL, 64);
#endif #endif
} else { } else {
panic("%s:%s() Too many pages to unmap.\n", __FILE__, panic("%s:%s() Too many pages to unmap.\n", __FILE__,
...@@ -533,13 +557,14 @@ static u32 hint_lookup[] = { ...@@ -533,13 +557,14 @@ static u32 hint_lookup[] = {
* index are bits 12:19 of the value returned by LCI. * index are bits 12:19 of the value returned by LCI.
*/ */
void CCIO_INLINE void CCIO_INLINE
ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, void * vba, unsigned long hints) ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
unsigned long hints)
{ {
register unsigned long pa = (volatile unsigned long) vba; register unsigned long pa = (volatile unsigned long) vba;
register unsigned long ci; /* coherent index */ register unsigned long ci; /* coherent index */
/* We currently only support kernel addresses */ /* We currently only support kernel addresses */
ASSERT(sid == KERNEL_SPACE); BUG_ON(sid != KERNEL_SPACE);
mtsp(sid,1); mtsp(sid,1);
...@@ -652,7 +677,7 @@ ccio_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) ...@@ -652,7 +677,7 @@ ccio_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
unsigned int idx = PDIR_INDEX(iovp); unsigned int idx = PDIR_INDEX(iovp);
char *pdir_ptr = (char *) &(ioc->pdir_base[idx]); char *pdir_ptr = (char *) &(ioc->pdir_base[idx]);
ASSERT(idx < (ioc->pdir_size / sizeof(u64))); BUG_ON(idx >= (ioc->pdir_size / sizeof(u64)));
pdir_ptr[7] = 0; /* clear only VALID bit */ pdir_ptr[7] = 0; /* clear only VALID bit */
/* /*
** FIXME: PCX_W platforms don't need FDC/SYNC. (eg C360) ** FIXME: PCX_W platforms don't need FDC/SYNC. (eg C360)
...@@ -722,7 +747,7 @@ ccio_map_single(struct device *dev, void *addr, size_t size, ...@@ -722,7 +747,7 @@ ccio_map_single(struct device *dev, void *addr, size_t size,
BUG_ON(!dev); BUG_ON(!dev);
ioc = GET_IOC(dev); ioc = GET_IOC(dev);
ASSERT(size > 0); BUG_ON(size <= 0);
/* save offset bits */ /* save offset bits */
offset = ((unsigned long) addr) & ~IOVP_MASK; offset = ((unsigned long) addr) & ~IOVP_MASK;
...@@ -731,12 +756,12 @@ ccio_map_single(struct device *dev, void *addr, size_t size, ...@@ -731,12 +756,12 @@ ccio_map_single(struct device *dev, void *addr, size_t size,
size = ROUNDUP(size + offset, IOVP_SIZE); size = ROUNDUP(size + offset, IOVP_SIZE);
spin_lock_irqsave(&ioc->res_lock, flags); spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef CONFIG_PROC_FS #ifdef CCIO_MAP_STATS
ioc->msingle_calls++; ioc->msingle_calls++;
ioc->msingle_pages += size >> IOVP_SHIFT; ioc->msingle_pages += size >> IOVP_SHIFT;
#endif #endif
idx = ccio_alloc_range(ioc, (size >> IOVP_SHIFT)); idx = ccio_alloc_range(ioc, size);
iovp = (dma_addr_t)MKIOVP(idx); iovp = (dma_addr_t)MKIOVP(idx);
pdir_start = &(ioc->pdir_base[idx]); pdir_start = &(ioc->pdir_base[idx]);
...@@ -749,7 +774,7 @@ ccio_map_single(struct device *dev, void *addr, size_t size, ...@@ -749,7 +774,7 @@ ccio_map_single(struct device *dev, void *addr, size_t size,
hint |= HINT_SAFE_DMA; hint |= HINT_SAFE_DMA;
while(size > 0) { while(size > 0) {
ccio_io_pdir_entry(pdir_start, KERNEL_SPACE, addr, hint); ccio_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long)addr, hint);
DBG_RUN(" pdir %p %08x%08x\n", DBG_RUN(" pdir %p %08x%08x\n",
pdir_start, pdir_start,
...@@ -795,7 +820,7 @@ ccio_unmap_single(struct device *dev, dma_addr_t iova, size_t size, ...@@ -795,7 +820,7 @@ ccio_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
spin_lock_irqsave(&ioc->res_lock, flags); spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef CONFIG_PROC_FS #ifdef CCIO_MAP_STATS
ioc->usingle_calls++; ioc->usingle_calls++;
ioc->usingle_pages += size >> IOVP_SHIFT; ioc->usingle_pages += size >> IOVP_SHIFT;
#endif #endif
...@@ -861,180 +886,10 @@ ccio_free_consistent(struct device *dev, size_t size, void *cpu_addr, ...@@ -861,180 +886,10 @@ ccio_free_consistent(struct device *dev, size_t size, void *cpu_addr,
*/ */
#define PIDE_FLAG 0x80000000UL #define PIDE_FLAG 0x80000000UL
/** #ifdef CCIO_MAP_STATS
* ccio_fill_pdir - Insert coalesced scatter/gather chunks into the I/O Pdir. #define IOMMU_MAP_STATS
* @ioc: The I/O Controller.
* @startsg: The scatter/gather list of coalesced chunks.
* @nents: The number of entries in the scatter/gather list.
* @hint: The DMA Hint.
*
* This function inserts the coalesced scatter/gather list chunks into the
* I/O Controller's I/O Pdir.
*/
static CCIO_INLINE int
ccio_fill_pdir(struct ioc *ioc, struct scatterlist *startsg, int nents,
unsigned long hint)
{
struct scatterlist *dma_sg = startsg; /* pointer to current DMA */
int n_mappings = 0;
u64 *pdirp = 0;
unsigned long dma_offset = 0;
dma_sg--;
while (nents-- > 0) {
int cnt = sg_dma_len(startsg);
sg_dma_len(startsg) = 0;
DBG_RUN_SG(" %d : %08lx/%05x %08lx/%05x\n", nents,
(unsigned long)sg_dma_address(startsg), cnt,
sg_virt_addr(startsg), startsg->length
);
/*
** Look for the start of a new DMA stream
*/
if(sg_dma_address(startsg) & PIDE_FLAG) {
u32 pide = sg_dma_address(startsg) & ~PIDE_FLAG;
dma_offset = (unsigned long) pide & ~IOVP_MASK;
sg_dma_address(startsg) = 0;
dma_sg++;
sg_dma_address(dma_sg) = pide;
pdirp = &(ioc->pdir_base[pide >> IOVP_SHIFT]);
n_mappings++;
}
/*
** Look for a VCONTIG chunk
*/
if (cnt) {
unsigned long vaddr = sg_virt_addr(startsg);
ASSERT(pdirp);
/* Since multiple Vcontig blocks could make up
** one DMA stream, *add* cnt to dma_len.
*/
sg_dma_len(dma_sg) += cnt;
cnt += dma_offset;
dma_offset=0; /* only want offset on first chunk */
cnt = ROUNDUP(cnt, IOVP_SIZE);
#ifdef CONFIG_PROC_FS
ioc->msg_pages += cnt >> IOVP_SHIFT;
#endif #endif
do { #include "iommu-helpers.h"
ccio_io_pdir_entry(pdirp, KERNEL_SPACE,
(void *)vaddr, hint);
vaddr += IOVP_SIZE;
cnt -= IOVP_SIZE;
pdirp++;
} while (cnt > 0);
}
startsg++;
}
return(n_mappings);
}
/*
** First pass is to walk the SG list and determine where the breaks are
** in the DMA stream. Allocates PDIR entries but does not fill them.
** Returns the number of DMA chunks.
**
** Doing the fill separate from the coalescing/allocation keeps the
** code simpler. Future enhancement could make one pass through
** the sglist do both.
*/
static CCIO_INLINE int
ccio_coalesce_chunks(struct ioc *ioc, struct scatterlist *startsg, int nents)
{
struct scatterlist *vcontig_sg; /* VCONTIG chunk head */
unsigned long vcontig_len; /* len of VCONTIG chunk */
unsigned long vcontig_end;
struct scatterlist *dma_sg; /* next DMA stream head */
unsigned long dma_offset, dma_len; /* start/len of DMA stream */
int n_mappings = 0;
while (nents > 0) {
/*
** Prepare for first/next DMA stream
*/
dma_sg = vcontig_sg = startsg;
dma_len = vcontig_len = vcontig_end = startsg->length;
vcontig_end += sg_virt_addr(startsg);
dma_offset = sg_virt_addr(startsg) & ~IOVP_MASK;
/* PARANOID: clear entries */
sg_dma_address(startsg) = 0;
sg_dma_len(startsg) = 0;
/*
** This loop terminates one iteration "early" since
** it's always looking one "ahead".
*/
while(--nents > 0) {
unsigned long startsg_end;
startsg++;
startsg_end = sg_virt_addr(startsg) +
startsg->length;
/* PARANOID: clear entries */
sg_dma_address(startsg) = 0;
sg_dma_len(startsg) = 0;
/*
** First make sure current dma stream won't
** exceed DMA_CHUNK_SIZE if we coalesce the
** next entry.
*/
if(ROUNDUP(dma_len + dma_offset + startsg->length,
IOVP_SIZE) > DMA_CHUNK_SIZE)
break;
/*
** Append the next transaction?
*/
if (vcontig_end == sg_virt_addr(startsg)) {
vcontig_len += startsg->length;
vcontig_end += startsg->length;
dma_len += startsg->length;
continue;
}
/*
** Not virtually contigous.
** Terminate prev chunk.
** Start a new chunk.
**
** Once we start a new VCONTIG chunk, dma_offset
** can't change. And we need the offset from the first
** chunk - not the last one. Ergo Successive chunks
** must start on page boundaries and dove tail
** with its predecessor.
*/
sg_dma_len(vcontig_sg) = vcontig_len;
vcontig_sg = startsg;
vcontig_len = startsg->length;
break;
}
/*
** End of DMA Stream
** Terminate last VCONTIG block.
** Allocate space for DMA stream.
*/
sg_dma_len(vcontig_sg) = vcontig_len;
dma_len = ROUNDUP(dma_len + dma_offset, IOVP_SIZE);
sg_dma_address(dma_sg) =
PIDE_FLAG
| (ccio_alloc_range(ioc, (dma_len >> IOVP_SHIFT)) << IOVP_SHIFT)
| dma_offset;
n_mappings++;
}
return n_mappings;
}
/** /**
* ccio_map_sg - Map the scatter/gather list into the IOMMU. * ccio_map_sg - Map the scatter/gather list into the IOMMU.
...@@ -1053,6 +908,8 @@ ccio_map_sg(struct device *dev, struct scatterlist *sglist, int nents, ...@@ -1053,6 +908,8 @@ ccio_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
int coalesced, filled = 0; int coalesced, filled = 0;
unsigned long flags; unsigned long flags;
unsigned long hint = hint_lookup[(int)direction]; unsigned long hint = hint_lookup[(int)direction];
unsigned long prev_len = 0, current_len = 0;
int i;
BUG_ON(!dev); BUG_ON(!dev);
ioc = GET_IOC(dev); ioc = GET_IOC(dev);
...@@ -1067,10 +924,13 @@ ccio_map_sg(struct device *dev, struct scatterlist *sglist, int nents, ...@@ -1067,10 +924,13 @@ ccio_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
sg_dma_len(sglist) = sglist->length; sg_dma_len(sglist) = sglist->length;
return 1; return 1;
} }
for(i = 0; i < nents; i++)
prev_len += sglist[i].length;
spin_lock_irqsave(&ioc->res_lock, flags); spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef CONFIG_PROC_FS #ifdef CCIO_MAP_STATS
ioc->msg_calls++; ioc->msg_calls++;
#endif #endif
...@@ -1082,7 +942,7 @@ ccio_map_sg(struct device *dev, struct scatterlist *sglist, int nents, ...@@ -1082,7 +942,7 @@ ccio_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
** w/o this association, we wouldn't have coherent DMA! ** w/o this association, we wouldn't have coherent DMA!
** Access to the virtual address is what forces a two pass algorithm. ** Access to the virtual address is what forces a two pass algorithm.
*/ */
coalesced = ccio_coalesce_chunks(ioc, sglist, nents); coalesced = iommu_coalesce_chunks(ioc, sglist, nents, ccio_alloc_range);
/* /*
** Program the I/O Pdir ** Program the I/O Pdir
...@@ -1092,13 +952,19 @@ ccio_map_sg(struct device *dev, struct scatterlist *sglist, int nents, ...@@ -1092,13 +952,19 @@ ccio_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
** o dma_len will contain the number of bytes to map ** o dma_len will contain the number of bytes to map
** o page/offset contain the virtual address. ** o page/offset contain the virtual address.
*/ */
filled = ccio_fill_pdir(ioc, sglist, nents, hint); filled = iommu_fill_pdir(ioc, sglist, nents, hint, ccio_io_pdir_entry);
spin_unlock_irqrestore(&ioc->res_lock, flags); spin_unlock_irqrestore(&ioc->res_lock, flags);
ASSERT(coalesced == filled); BUG_ON(coalesced != filled);
DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled); DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
for (i = 0; i < filled; i++)
current_len += sg_dma_len(sglist + i);
BUG_ON(current_len != prev_len);
return filled; return filled;
} }
...@@ -1123,13 +989,13 @@ ccio_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, ...@@ -1123,13 +989,13 @@ ccio_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
DBG_RUN_SG("%s() START %d entries, %08lx,%x\n", DBG_RUN_SG("%s() START %d entries, %08lx,%x\n",
__FUNCTION__, nents, sg_virt_addr(sglist), sglist->length); __FUNCTION__, nents, sg_virt_addr(sglist), sglist->length);
#ifdef CONFIG_PROC_FS #ifdef CCIO_MAP_STATS
ioc->usg_calls++; ioc->usg_calls++;
#endif #endif
while(sg_dma_len(sglist) && nents--) { while(sg_dma_len(sglist) && nents--) {
#ifdef CONFIG_PROC_FS #ifdef CCIO_MAP_STATS
ioc->usg_pages += sg_dma_len(sglist) >> PAGE_SHIFT; ioc->usg_pages += sg_dma_len(sglist) >> PAGE_SHIFT;
#endif #endif
ccio_unmap_single(dev, sg_dma_address(sglist), ccio_unmap_single(dev, sg_dma_address(sglist),
...@@ -1201,18 +1067,18 @@ static int ccio_proc_info(char *buf, char **start, off_t offset, int count, ...@@ -1201,18 +1067,18 @@ static int ccio_proc_info(char *buf, char **start, off_t offset, int count,
total_pages * 8, total_pages); total_pages * 8, total_pages);
if (proc_append(tmp, len, &buf, &offset, &count)) if (proc_append(tmp, len, &buf, &offset, &count))
break; break;
#ifdef CCIO_MAP_STATS
len = sprintf(tmp, "IO PDIR entries : %ld free %ld used (%d%%)\n", len = sprintf(tmp, "IO PDIR entries : %ld free %ld used (%d%%)\n",
total_pages - ioc->used_pages, ioc->used_pages, total_pages - ioc->used_pages, ioc->used_pages,
(int)(ioc->used_pages * 100 / total_pages)); (int)(ioc->used_pages * 100 / total_pages));
if (proc_append(tmp, len, &buf, &offset, &count)) if (proc_append(tmp, len, &buf, &offset, &count))
break; break;
#endif
len = sprintf(tmp, "Resource bitmap : %d bytes (%d pages)\n", len = sprintf(tmp, "Resource bitmap : %d bytes (%d pages)\n",
ioc->res_size, total_pages); ioc->res_size, total_pages);
if (proc_append(tmp, len, &buf, &offset, &count)) if (proc_append(tmp, len, &buf, &offset, &count))
break; break;
#ifdef CCIO_SEARCH_TIME
min = max = ioc->avg_search[0]; min = max = ioc->avg_search[0];
for(j = 0; j < CCIO_SEARCH_SAMPLE; ++j) { for(j = 0; j < CCIO_SEARCH_SAMPLE; ++j) {
avg += ioc->avg_search[j]; avg += ioc->avg_search[j];
...@@ -1226,7 +1092,8 @@ static int ccio_proc_info(char *buf, char **start, off_t offset, int count, ...@@ -1226,7 +1092,8 @@ static int ccio_proc_info(char *buf, char **start, off_t offset, int count,
min, avg, max); min, avg, max);
if (proc_append(tmp, len, &buf, &offset, &count)) if (proc_append(tmp, len, &buf, &offset, &count))
break; break;
#endif
#ifdef CCIO_MAP_STATS
len = sprintf(tmp, "pci_map_single(): %8ld calls %8ld pages (avg %d/1000)\n", len = sprintf(tmp, "pci_map_single(): %8ld calls %8ld pages (avg %d/1000)\n",
ioc->msingle_calls, ioc->msingle_pages, ioc->msingle_calls, ioc->msingle_pages,
(int)((ioc->msingle_pages * 1000)/ioc->msingle_calls)); (int)((ioc->msingle_pages * 1000)/ioc->msingle_calls));
...@@ -1252,7 +1119,7 @@ static int ccio_proc_info(char *buf, char **start, off_t offset, int count, ...@@ -1252,7 +1119,7 @@ static int ccio_proc_info(char *buf, char **start, off_t offset, int count,
(int)((ioc->usg_pages * 1000)/ioc->usg_calls)); (int)((ioc->usg_pages * 1000)/ioc->usg_calls));
if (proc_append(tmp, len, &buf, &offset, &count)) if (proc_append(tmp, len, &buf, &offset, &count))
break; break;
#endif /* CCIO_MAP_STATS */
ioc = ioc->next; ioc = ioc->next;
} }
...@@ -1338,9 +1205,7 @@ void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp) ...@@ -1338,9 +1205,7 @@ void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp)
struct ioc *ioc = ccio_get_iommu(dev); struct ioc *ioc = ccio_get_iommu(dev);
u8 *res_ptr; u8 *res_ptr;
#ifdef CONFIG_PROC_FS
ioc->cujo20_bug = 1; ioc->cujo20_bug = 1;
#endif
res_ptr = ioc->res_map; res_ptr = ioc->res_map;
idx = PDIR_INDEX(iovp) >> 3; idx = PDIR_INDEX(iovp) >> 3;
...@@ -1431,16 +1296,16 @@ ccio_ioc_init(struct ioc *ioc) ...@@ -1431,16 +1296,16 @@ ccio_ioc_init(struct ioc *ioc)
*/ */
iov_order = get_order(iova_space_size) >> (IOVP_SHIFT - PAGE_SHIFT); iov_order = get_order(iova_space_size) >> (IOVP_SHIFT - PAGE_SHIFT);
ASSERT(iov_order <= (30 - IOVP_SHIFT)); /* iova_space_size <= 1GB */ BUG_ON(iov_order > (30 - IOVP_SHIFT)); /* iova_space_size <= 1GB */
ASSERT(iov_order >= (20 - IOVP_SHIFT)); /* iova_space_size >= 1MB */ BUG_ON(iov_order < (20 - IOVP_SHIFT)); /* iova_space_size >= 1MB */
iova_space_size = 1 << (iov_order + IOVP_SHIFT); iova_space_size = 1 << (iov_order + IOVP_SHIFT);
ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64); ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
ASSERT(ioc->pdir_size < 4 * 1024 * 1024); /* max pdir size < 4MB */ BUG_ON(ioc->pdir_size >= 4 * 1024 * 1024); /* max pdir size < 4MB */
/* Verify it's a power of two */ /* Verify it's a power of two */
ASSERT((1 << get_order(ioc->pdir_size)) == (ioc->pdir_size >> PAGE_SHIFT)); BUG_ON((1 << get_order(ioc->pdir_size)) != (ioc->pdir_size >> PAGE_SHIFT));
DBG_INIT("%s() hpa 0x%p mem %luMB IOV %dMB (%d bits) PDIR size 0x%0x", DBG_INIT("%s() hpa 0x%p mem %luMB IOV %dMB (%d bits) PDIR size 0x%0x",
__FUNCTION__, ioc->ioc_hpa, physmem>>20, iova_space_size>>20, __FUNCTION__, ioc->ioc_hpa, physmem>>20, iova_space_size>>20,
...@@ -1454,7 +1319,7 @@ ccio_ioc_init(struct ioc *ioc) ...@@ -1454,7 +1319,7 @@ ccio_ioc_init(struct ioc *ioc)
} }
memset(ioc->pdir_base, 0, ioc->pdir_size); memset(ioc->pdir_base, 0, ioc->pdir_size);
ASSERT((((unsigned long)ioc->pdir_base) & PAGE_MASK) == (unsigned long)ioc->pdir_base); BUG_ON((((unsigned long)ioc->pdir_base) & PAGE_MASK) != (unsigned long)ioc->pdir_base);
DBG_INIT(" base %p", ioc->pdir_base); DBG_INIT(" base %p", ioc->pdir_base);
/* resource map size dictated by pdir_size */ /* resource map size dictated by pdir_size */
...@@ -1686,13 +1551,14 @@ static int ccio_probe(struct parisc_device *dev) ...@@ -1686,13 +1551,14 @@ static int ccio_probe(struct parisc_device *dev)
if (ioc_count == 0) { if (ioc_count == 0) {
/* XXX: Create separate entries for each ioc */ /* FIXME: Create separate entries for each ioc */
create_proc_read_entry(MODULE_NAME, S_IRWXU, proc_runway_root, create_proc_read_entry(MODULE_NAME, S_IRWXU, proc_runway_root,
ccio_proc_info, NULL); ccio_proc_info, NULL);
create_proc_read_entry(MODULE_NAME"-bitmap", S_IRWXU, create_proc_read_entry(MODULE_NAME"-bitmap", S_IRWXU,
proc_runway_root, ccio_resource_map, NULL); proc_runway_root, ccio_resource_map, NULL);
} }
parisc_vmerge_boundary = IOVP_SIZE;
parisc_vmerge_max_size = BITS_PER_LONG * IOVP_SIZE;
ioc_count++; ioc_count++;
return 0; return 0;
} }
......
drivers/parisc/eisa.c
View file @ fa9fcf5f
...@@ -116,6 +116,16 @@ void eisa_out32(unsigned int data, unsigned short port) ...@@ -116,6 +116,16 @@ void eisa_out32(unsigned int data, unsigned short port)
gsc_writel(cpu_to_le32(data), eisa_permute(port)); gsc_writel(cpu_to_le32(data), eisa_permute(port));
} }
#ifndef CONFIG_PCI
/* We call these directly without PCI. See asm/io.h. */
EXPORT_SYMBOL(eisa_in8);
EXPORT_SYMBOL(eisa_in16);
EXPORT_SYMBOL(eisa_in32);
EXPORT_SYMBOL(eisa_out8);
EXPORT_SYMBOL(eisa_out16);
EXPORT_SYMBOL(eisa_out32);
#endif
/* Interrupt handling */ /* Interrupt handling */
/* cached interrupt mask registers */ /* cached interrupt mask registers */
......
drivers/parisc/gsc.c
View file @ fa9fcf5f
...@@ -29,6 +29,11 @@ ...@@ -29,6 +29,11 @@
#include "gsc.h" #include "gsc.h"
/* This sets the vmerge boundary and size, it's here because it has to
* be available on all platforms (zero means no-virtual merging) */
unsigned long parisc_vmerge_boundary = 0;
unsigned long parisc_vmerge_max_size = 0;
#undef DEBUG #undef DEBUG
#ifdef DEBUG #ifdef DEBUG
......
drivers/parisc/iommu-helpers.h 0 → 100644
View file @ fa9fcf5f
/**
* iommu_fill_pdir - Insert coalesced scatter/gather chunks into the I/O Pdir.
* @ioc: The I/O Controller.
* @startsg: The scatter/gather list of coalesced chunks.
* @nents: The number of entries in the scatter/gather list.
* @hint: The DMA Hint.
*
* This function inserts the coalesced scatter/gather list chunks into the
* I/O Controller's I/O Pdir.
*/
static inline unsigned int
iommu_fill_pdir(struct ioc *ioc, struct scatterlist *startsg, int nents,
unsigned long hint,
void (*iommu_io_pdir_entry)(u64 *, space_t, unsigned long,
unsigned long))
{
struct scatterlist *dma_sg = startsg; /* pointer to current DMA */
unsigned int n_mappings = 0;
unsigned long dma_offset = 0, dma_len = 0;
u64 *pdirp = NULL;
/* Horrible hack. For efficiency's sake, dma_sg starts one
* entry below the true start (it is immediately incremented
* in the loop) */
dma_sg--;
while (nents-- > 0) {
unsigned long vaddr;
long size;
DBG_RUN_SG(" %d : %08lx/%05x %08lx/%05x\n", nents,
(unsigned long)sg_dma_address(startsg), cnt,
sg_virt_addr(startsg), startsg->length
);
/*
** Look for the start of a new DMA stream
*/
if (sg_dma_address(startsg) & PIDE_FLAG) {
u32 pide = sg_dma_address(startsg) & ~PIDE_FLAG;
BUG_ON(pdirp && (dma_len != sg_dma_len(dma_sg)));
dma_sg++;
dma_len = sg_dma_len(startsg);
sg_dma_len(startsg) = 0;
dma_offset = (unsigned long) pide & ~IOVP_MASK;
n_mappings++;
sg_dma_address(dma_sg) = pide;
pdirp = &(ioc->pdir_base[pide >> IOVP_SHIFT]);
prefetchw(pdirp);
}
BUG_ON(pdirp == NULL);
vaddr = sg_virt_addr(startsg);
sg_dma_len(dma_sg) += startsg->length;
size = startsg->length + dma_offset;
dma_offset = 0;
#ifdef IOMMU_MAP_STATS
ioc->msg_pages += startsg->length >> IOVP_SHIFT;
#endif
do {
iommu_io_pdir_entry(pdirp, KERNEL_SPACE,
vaddr, hint);
vaddr += IOVP_SIZE;
size -= IOVP_SIZE;
pdirp++;
} while(unlikely(size > 0));
startsg++;
}
return(n_mappings);
}
/*
** First pass is to walk the SG list and determine where the breaks are
** in the DMA stream. Allocates PDIR entries but does not fill them.
** Returns the number of DMA chunks.
**
** Doing the fill separate from the coalescing/allocation keeps the
** code simpler. Future enhancement could make one pass through
** the sglist do both.
*/
static inline unsigned int
iommu_coalesce_chunks(struct ioc *ioc, struct scatterlist *startsg, int nents,
int (*iommu_alloc_range)(struct ioc *, size_t))
{
struct scatterlist *contig_sg; /* contig chunk head */
unsigned long dma_offset, dma_len; /* start/len of DMA stream */
unsigned int n_mappings = 0;
while (nents > 0) {
/*
** Prepare for first/next DMA stream
*/
contig_sg = startsg;
dma_len = startsg->length;
dma_offset = sg_virt_addr(startsg) & ~IOVP_MASK;
/* PARANOID: clear entries */
sg_dma_address(startsg) = 0;
sg_dma_len(startsg) = 0;
/*
** This loop terminates one iteration "early" since
** it's always looking one "ahead".
*/
while(--nents > 0) {
unsigned long prevstartsg_end, startsg_end;
prevstartsg_end = sg_virt_addr(startsg) +
startsg->length;
startsg++;
startsg_end = sg_virt_addr(startsg) +
startsg->length;
/* PARANOID: clear entries */
sg_dma_address(startsg) = 0;
sg_dma_len(startsg) = 0;
/*
** First make sure current dma stream won't
** exceed DMA_CHUNK_SIZE if we coalesce the
** next entry.
*/
if(unlikely(ROUNDUP(dma_len + dma_offset + startsg->length,
IOVP_SIZE) > DMA_CHUNK_SIZE))
break;
/*
** Next see if we can append the next chunk (i.e.
** it must end on one page and begin on another
*/
if (unlikely(((prevstartsg_end | sg_virt_addr(startsg)) & ~PAGE_MASK) != 0))
break;
dma_len += startsg->length;
}
/*
** End of DMA Stream
** Terminate last VCONTIG block.
** Allocate space for DMA stream.
*/
sg_dma_len(contig_sg) = dma_len;
dma_len = ROUNDUP(dma_len + dma_offset, IOVP_SIZE);
sg_dma_address(contig_sg) =
PIDE_FLAG
| (iommu_alloc_range(ioc, dma_len) << IOVP_SHIFT)
| dma_offset;
n_mappings++;
}
return n_mappings;
}
drivers/parisc/lba_pci.c
View file @ fa9fcf5f
...@@ -533,10 +533,10 @@ static int lba_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int si ...@@ -533,10 +533,10 @@ static int lba_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int si
*/ */
LBA_CFG_TR4_ADDR_SETUP(d, tok | pos); LBA_CFG_TR4_ADDR_SETUP(d, tok | pos);
switch(size) { switch(size) {
case 1: *(u8 *) data = READ_REG8(d->hba.base_addr + LBA_PCI_CFG_DATA); case 1: *(u8 *) data = READ_REG8(d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 3));
break; break;
case 2: *(u16 *) data = READ_REG16(d->hba.base_addr + LBA_PCI_CFG_DATA); case 2: *(u16 *) data = READ_REG16(d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 2));
break; break;
case 4: *(u32 *) data = READ_REG32(d->hba.base_addr + LBA_PCI_CFG_DATA); case 4: *(u32 *) data = READ_REG32(d->hba.base_addr + LBA_PCI_CFG_DATA);
break; break;
} }
...@@ -613,13 +613,14 @@ static int lba_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int s ...@@ -613,13 +613,14 @@ static int lba_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int s
/* Basic Algorithm */ /* Basic Algorithm */
LBA_CFG_TR4_ADDR_SETUP(d, tok | pos); LBA_CFG_TR4_ADDR_SETUP(d, tok | pos);
switch(size) { switch(size) {
case 1: WRITE_REG8 (data, d->hba.base_addr + LBA_PCI_CFG_DATA); case 1: WRITE_REG8 (data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 3));
break; break;
case 2: WRITE_REG16(data, d->hba.base_addr + LBA_PCI_CFG_DATA); case 2: WRITE_REG16(data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 2));
break; break;
case 4: WRITE_REG32(data, d->hba.base_addr + LBA_PCI_CFG_DATA); case 4: WRITE_REG32(data, d->hba.base_addr + LBA_PCI_CFG_DATA);
break; break;
} }
/* flush posted write */
lba_t32 = READ_REG32(d->hba.base_addr + LBA_PCI_CFG_ADDR); lba_t32 = READ_REG32(d->hba.base_addr + LBA_PCI_CFG_ADDR);
return 0; return 0;
} }
......
drivers/parisc/sba_iommu.c
View file @ fa9fcf5f
...@@ -700,7 +700,8 @@ typedef unsigned long space_t; ...@@ -700,7 +700,8 @@ typedef unsigned long space_t;
void SBA_INLINE void SBA_INLINE
sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba) sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
unsigned long hint)
{ {
u64 pa; /* physical address */ u64 pa; /* physical address */
register unsigned ci; /* coherent index */ register unsigned ci; /* coherent index */
...@@ -874,7 +875,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, ...@@ -874,7 +875,7 @@ sba_map_single(struct device *dev, void *addr, size_t size,
while (size > 0) { while (size > 0) {
ASSERT(((u8 *)pdir_start)[7] == 0); /* verify availability */ ASSERT(((u8 *)pdir_start)[7] == 0); /* verify availability */
sba_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long) addr); sba_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long) addr, 0);
DBG_RUN(" pdir 0x%p %02x%02x%02x%02x%02x%02x%02x%02x\n", DBG_RUN(" pdir 0x%p %02x%02x%02x%02x%02x%02x%02x%02x\n",
pdir_start, pdir_start,
...@@ -1027,243 +1028,15 @@ sba_free_consistent(struct device *hwdev, size_t size, void *vaddr, ...@@ -1027,243 +1028,15 @@ sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
*/ */
#define PIDE_FLAG 0x80000000UL #define PIDE_FLAG 0x80000000UL
#ifdef DEBUG_LARGE_SG_ENTRIES
int dump_run_sg = 0;
#endif
/**
* sba_fill_pdir - write allocated SG entries into IO PDIR
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @startsg: list of IOVA/size pairs
* @nents: number of entries in startsg list
*
* Take preprocessed SG list and write corresponding entries
* in the IO PDIR.
*/
static SBA_INLINE int
sba_fill_pdir(
struct ioc *ioc,
struct scatterlist *startsg,
int nents)
{
struct scatterlist *dma_sg = startsg; /* pointer to current DMA */
int n_mappings = 0;
u64 *pdirp = 0;
unsigned long dma_offset = 0;
dma_sg--;
while (nents-- > 0) {
int cnt = sg_dma_len(startsg);
sg_dma_len(startsg) = 0;
#ifdef DEBUG_LARGE_SG_ENTRIES
if (dump_run_sg)
printk(KERN_DEBUG " %2d : %08lx/%05x %p/%05x\n",
nents,
(unsigned long) sg_dma_address(startsg), cnt,
sg_virt_addr(startsg), startsg->length
);
#else
DBG_RUN_SG(" %d : %08lx/%05x %p/%05x\n",
nents,
(unsigned long) sg_dma_address(startsg), cnt,
sg_virt_addr(startsg), startsg->length
);
#endif
/*
** Look for the start of a new DMA stream
*/
if (sg_dma_address(startsg) & PIDE_FLAG) {
u32 pide = sg_dma_address(startsg) & ~PIDE_FLAG;
dma_offset = (unsigned long) pide & ~IOVP_MASK;
sg_dma_address(startsg) = 0;
dma_sg++;
sg_dma_address(dma_sg) = pide;
pdirp = &(ioc->pdir_base[pide >> IOVP_SHIFT]);
n_mappings++;
}
/*
** Look for a VCONTIG chunk
*/
if (cnt) {
unsigned long vaddr = (unsigned long) sg_virt_addr(startsg);
ASSERT(pdirp);
/* Since multiple Vcontig blocks could make up
** one DMA stream, *add* cnt to dma_len.
*/
sg_dma_len(dma_sg) += cnt;
cnt += dma_offset;
dma_offset=0; /* only want offset on first chunk */
cnt = ROUNDUP(cnt, IOVP_SIZE);
#ifdef SBA_COLLECT_STATS #ifdef SBA_COLLECT_STATS
ioc->msg_pages += cnt >> IOVP_SHIFT; #define IOMMU_MAP_STATS
#endif
do {
sba_io_pdir_entry(pdirp, KERNEL_SPACE, vaddr);
vaddr += IOVP_SIZE;
cnt -= IOVP_SIZE;
pdirp++;
} while (cnt > 0);
}
startsg++;
}
#ifdef DEBUG_LARGE_SG_ENTRIES
dump_run_sg = 0;
#endif #endif
return(n_mappings); #include "iommu-helpers.h"
}
/*
** Two address ranges are DMA contiguous *iff* "end of prev" and
** "start of next" are both on a page boundary.
**
** (shift left is a quick trick to mask off upper bits)
*/
#define DMA_CONTIG(__X, __Y) \
(((((unsigned long) __X) | ((unsigned long) __Y)) << (BITS_PER_LONG - PAGE_SHIFT)) == 0UL)
/**
* sba_coalesce_chunks - preprocess the SG list
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @startsg: list of IOVA/size pairs
* @nents: number of entries in startsg list
*
* First pass is to walk the SG list and determine where the breaks are
* in the DMA stream. Allocates PDIR entries but does not fill them.
* Returns the number of DMA chunks.
*
* Doing the fill separate from the coalescing/allocation keeps the
* code simpler. Future enhancement could make one pass through
* the sglist do both.
*/
static SBA_INLINE int
sba_coalesce_chunks( struct ioc *ioc,
struct scatterlist *startsg,
int nents)
{
struct scatterlist *vcontig_sg; /* VCONTIG chunk head */
unsigned long vcontig_len; /* len of VCONTIG chunk */
unsigned long vcontig_end;
struct scatterlist *dma_sg; /* next DMA stream head */
unsigned long dma_offset, dma_len; /* start/len of DMA stream */
int n_mappings = 0;
while (nents > 0) {
unsigned long vaddr = (unsigned long) sg_virt_addr(startsg);
/*
** Prepare for first/next DMA stream
*/
dma_sg = vcontig_sg = startsg;
dma_len = vcontig_len = vcontig_end = startsg->length;
vcontig_end += vaddr;
dma_offset = vaddr & ~IOVP_MASK;
/* PARANOID: clear entries */
sg_dma_address(startsg) = 0;
sg_dma_len(startsg) = 0;
/*
** This loop terminates one iteration "early" since
** it's always looking one "ahead".
*/
while (--nents > 0) {
unsigned long vaddr; /* tmp */
startsg++;
/* PARANOID: clear entries */
sg_dma_address(startsg) = 0;
sg_dma_len(startsg) = 0;
/* catch brokenness in SCSI layer */
ASSERT(startsg->length <= DMA_CHUNK_SIZE);
/*
** First make sure current dma stream won't
** exceed DMA_CHUNK_SIZE if we coalesce the
** next entry.
*/
if (((dma_len + dma_offset + startsg->length + ~IOVP_MASK) & IOVP_MASK) > DMA_CHUNK_SIZE)
break;
/*
** Then look for virtually contiguous blocks.
** PARISC needs to associate a virtual address
** with each IO address mapped. The CPU cache is
** virtually tagged and the IOMMU uses part
** of the virtual address to participate in
** CPU cache coherency.
**
** append the next transaction?
*/
vaddr = (unsigned long) sg_virt_addr(startsg);
if (vcontig_end == vaddr)
{
vcontig_len += startsg->length;
vcontig_end += startsg->length;
dma_len += startsg->length;
continue;
}
#ifdef DEBUG_LARGE_SG_ENTRIES #ifdef DEBUG_LARGE_SG_ENTRIES
dump_run_sg = (vcontig_len > IOVP_SIZE); int dump_run_sg = 0;
#endif #endif
/*
** Not virtually contigous.
** Terminate prev chunk.
** Start a new chunk.
**
** Once we start a new VCONTIG chunk, dma_offset
** can't change. And we need the offset from the first
** chunk - not the last one. Ergo Successive chunks
** must start on page boundaries and dove tail
** with its predecessor.
*/
sg_dma_len(vcontig_sg) = vcontig_len;
vcontig_sg = startsg;
vcontig_len = startsg->length;
/*
** 3) do the entries end/start on page boundaries?
** Don't update vcontig_end until we've checked.
*/
if (DMA_CONTIG(vcontig_end, vaddr))
{
vcontig_end = vcontig_len + vaddr;
dma_len += vcontig_len;
continue;
} else {
break;
}
}
/*
** End of DMA Stream
** Terminate last VCONTIG block.
** Allocate space for DMA stream.
*/
sg_dma_len(vcontig_sg) = vcontig_len;
dma_len = (dma_len + dma_offset + ~IOVP_MASK) & IOVP_MASK;
ASSERT(dma_len <= DMA_CHUNK_SIZE);
sg_dma_address(dma_sg) =
PIDE_FLAG
| (sba_alloc_range(ioc, dma_len) << IOVP_SHIFT)
| dma_offset;
n_mappings++;
}
return n_mappings;
}
/** /**
* sba_map_sg - map Scatter/Gather list * sba_map_sg - map Scatter/Gather list
...@@ -1318,7 +1091,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, ...@@ -1318,7 +1091,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
** w/o this association, we wouldn't have coherent DMA! ** w/o this association, we wouldn't have coherent DMA!
** Access to the virtual address is what forces a two pass algorithm. ** Access to the virtual address is what forces a two pass algorithm.
*/ */
coalesced = sba_coalesce_chunks(ioc, sglist, nents); coalesced = iommu_coalesce_chunks(ioc, sglist, nents, sba_alloc_range);
/* /*
** Program the I/O Pdir ** Program the I/O Pdir
...@@ -1328,7 +1101,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, ...@@ -1328,7 +1101,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
** o dma_len will contain the number of bytes to map ** o dma_len will contain the number of bytes to map
** o address contains the virtual address. ** o address contains the virtual address.
*/ */
filled = sba_fill_pdir(ioc, sglist, nents); filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry);
#ifdef ASSERT_PDIR_SANITY #ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check after sba_map_sg()")) if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
...@@ -2047,6 +1820,9 @@ sba_driver_callback(struct parisc_device *dev) ...@@ -2047,6 +1820,9 @@ sba_driver_callback(struct parisc_device *dev)
create_proc_info_entry("bitmap", 0, proc_runway_root, sba_resource_map); create_proc_info_entry("bitmap", 0, proc_runway_root, sba_resource_map);
#endif #endif
#endif #endif
parisc_vmerge_boundary = IOVP_SIZE;
parisc_vmerge_max_size = IOVP_SIZE * BITS_PER_LONG;
return 0; return 0;
} }
......
drivers/parisc/superio.c
View file @ fa9fcf5f
...@@ -69,11 +69,15 @@ ...@@ -69,11 +69,15 @@
#include <linux/termios.h> #include <linux/termios.h>
#include <linux/tty.h> #include <linux/tty.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/hardware.h> #include <asm/hardware.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/superio.h> #include <asm/superio.h>
#define SUPERIO_IDE_MAX_RETRIES 25
static struct superio_device sio_dev; static struct superio_device sio_dev;
...@@ -161,7 +165,6 @@ superio_init(struct superio_device *sio) ...@@ -161,7 +165,6 @@ superio_init(struct superio_device *sio)
printk (KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n", printk (KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
pci_name(pdev),pdev->irq); pci_name(pdev),pdev->irq);
/* Find our I/O devices */
pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base); pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
sio->sp1_base &= ~1; sio->sp1_base &= ~1;
printk (KERN_INFO "SuperIO: Serial port 1 at 0x%x\n", sio->sp1_base); printk (KERN_INFO "SuperIO: Serial port 1 at 0x%x\n", sio->sp1_base);
...@@ -462,16 +465,72 @@ superio_parport_init(void) ...@@ -462,16 +465,72 @@ superio_parport_init(void)
} }
int static u8 superio_ide_inb (unsigned long port);
superio_get_ide_irq(void) static unsigned long superio_ide_status[2];
static unsigned long superio_ide_select[2];
static unsigned long superio_ide_dma_status[2];
void superio_fixup_pci(struct pci_dev *pdev)
{ {
if (sio_dev.irq_region) u8 prog;
return sio_dev.irq_region->data.irqbase + IDE_IRQ;
else pdev->class |= 0x5;
return 0; pci_write_config_byte(pdev, PCI_CLASS_PROG, pdev->class);
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
printk("PCI: Enabled native mode for NS87415 (pif=0x%x)\n", prog);
}
/* Because of a defect in Super I/O, all reads of the PCI DMA status
* registers, IDE status register and the IDE select register need to be
* retried
*/
static u8 superio_ide_inb (unsigned long port)
{
if (port == superio_ide_status[0] ||
port == superio_ide_status[1] ||
port == superio_ide_select[0] ||
port == superio_ide_select[1] ||
port == superio_ide_dma_status[0] ||
port == superio_ide_dma_status[1]) {
u8 tmp;
int retries = SUPERIO_IDE_MAX_RETRIES;
/* printk(" [ reading port 0x%x with retry ] ", port); */
do {
tmp = inb(port);
if (tmp == 0)
udelay(50);
} while (tmp == 0 && retries-- > 0);
return tmp;
}
return inb(port);
} }
EXPORT_SYMBOL(superio_get_ide_irq); void __init superio_ide_init_iops (struct hwif_s *hwif)
{
u32 base, dmabase;
u8 tmp;
struct pci_dev *pdev = hwif->pci_dev;
u8 port = hwif->channel;
base = pci_resource_start(pdev, port * 2) & ~3;
dmabase = pci_resource_start(pdev, 4) & ~3;
superio_ide_status[port] = base + IDE_STATUS_OFFSET;
superio_ide_select[port] = base + IDE_SELECT_OFFSET;
superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa);
/* Clear error/interrupt, enable dma */
tmp = superio_ide_inb(superio_ide_dma_status[port]);
outb(tmp | 0x66, superio_ide_dma_status[port]);
/* We need to override inb to workaround a SuperIO errata */
hwif->INB = superio_ide_inb;
}
static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_id *id) static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
{ {
......
drivers/parport/parport_gsc.c
View file @ fa9fcf5f
...@@ -476,7 +476,7 @@ static int __devinit parport_init_chip(struct parisc_device *dev) ...@@ -476,7 +476,7 @@ static int __devinit parport_init_chip(struct parisc_device *dev)
return 0; return 0;
} }
static void __devexit parport_remove_chip(struct parisc_device *dev) static int __devexit parport_remove_chip(struct parisc_device *dev)
{ {
struct parport *p = dev->dev.driver_data; struct parport *p = dev->dev.driver_data;
if (p) { if (p) {
...@@ -495,6 +495,7 @@ static void __devexit parport_remove_chip(struct parisc_device *dev) ...@@ -495,6 +495,7 @@ static void __devexit parport_remove_chip(struct parisc_device *dev)
parport_put_port(p); parport_put_port(p);
kfree (ops); /* hope no-one cached it */ kfree (ops); /* hope no-one cached it */
} }
return 0;
} }
static struct parisc_device_id parport_tbl[] = { static struct parisc_device_id parport_tbl[] = {
...@@ -508,7 +509,7 @@ static struct parisc_driver parport_driver = { ...@@ -508,7 +509,7 @@ static struct parisc_driver parport_driver = {
.name = "Parallel", .name = "Parallel",
.id_table = parport_tbl, .id_table = parport_tbl,
.probe = parport_init_chip, .probe = parport_init_chip,
.remove = parport_remove_chip, .remove = __devexit_p(parport_remove_chip),
}; };
int __devinit parport_gsc_init(void) int __devinit parport_gsc_init(void)
......
include/asm-parisc/floppy.h
View file @ fa9fcf5f
/* /* Architecture specific parts of the Floppy driver
* Architecture specific parts of the Floppy driver *
* Linux/PA-RISC Project (http://www.parisc-linux.org/)
* Copyright (C) 2000 Matthew Wilcox (willy a debian . org)
* Copyright (C) 2000 Dave Kennedy
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* *
* This file is subject to the terms and conditions of the GNU General Public * This program is distributed in the hope that it will be useful,
* License. See the file "COPYING" in the main directory of this archive * but WITHOUT ANY WARRANTY; without even the implied warranty of
* for more details. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* *
* Copyright (C) 1995 * You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/ */
#ifndef __ASM_PARISC_FLOPPY_H #ifndef __ASM_PARISC_FLOPPY_H
#define __ASM_PARISC_FLOPPY_H #define __ASM_PARISC_FLOPPY_H
......
include/asm-parisc/grfioctl.h
View file @ fa9fcf5f
/* /* Architecture specific parts of HP's STI (framebuffer) driver.
* Architecture specific parts of HP's STI (framebuffer) driver * Structures are HP-UX compatible for XFree86 usage.
* structures are HP-UX compatible for XFree86 usage *
*/ * Linux/PA-RISC Project (http://www.parisc-linux.org/)
* Copyright (C) 2001 Helge Deller (deller a parisc-linux org)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_PARISC_GRFIOCTL_H #ifndef __ASM_PARISC_GRFIOCTL_H
#define __ASM_PARISC_GRFIOCTL_H #define __ASM_PARISC_GRFIOCTL_H
......
include/asm-parisc/ide.h
View file @ fa9fcf5f
...@@ -14,36 +14,13 @@ ...@@ -14,36 +14,13 @@
#ifdef __KERNEL__ #ifdef __KERNEL__
#include <linux/config.h> #include <linux/config.h>
#include <asm/superio.h>
#ifndef MAX_HWIFS #ifndef MAX_HWIFS
#define MAX_HWIFS 2 #define MAX_HWIFS 2
#endif #endif
static __inline__ int ide_default_irq(ide_ioreg_t base) #define ide_default_irq(base) (0)
{ #define ide_default_io_base(index) ((ide_ioreg_t)0)
switch (base) {
#ifdef CONFIG_SUPERIO
case 0x1f0:
case 0x170:
return superio_get_ide_irq();
#endif /* CONFIG_SUPERIO */
default:
return 0;
}
}
static __inline__ ide_ioreg_t ide_default_io_base(int index)
{
switch (index) {
#ifdef CONFIG_SUPERIO
case 0: return (superio_get_ide_irq() ? 0x1f0 : 0);
case 1: return (superio_get_ide_irq() ? 0x170 : 0);
#endif /* CONFIG_SUPERIO */
default:
return 0;
}
}
static __inline__ void ide_init_hwif_ports(hw_regs_t *hw, ide_ioreg_t data_port, ide_ioreg_t ctrl_port, int *irq) static __inline__ void ide_init_hwif_ports(hw_regs_t *hw, ide_ioreg_t data_port, ide_ioreg_t ctrl_port, int *irq)
{ {
...@@ -93,7 +70,7 @@ static __inline__ void ide_init_default_hwifs(void) ...@@ -93,7 +70,7 @@ static __inline__ void ide_init_default_hwifs(void)
static __inline__ void __ide_mm_insw(unsigned long port, void *addr, u32 count) static __inline__ void __ide_mm_insw(unsigned long port, void *addr, u32 count)
{ {
while (count--) { while (count--) {
*(u16 *)addr = readw(port); *(u16 *)addr = __raw_readw(port);
addr += 2; addr += 2;
} }
} }
...@@ -101,7 +78,7 @@ static __inline__ void __ide_mm_insw(unsigned long port, void *addr, u32 count) ...@@ -101,7 +78,7 @@ static __inline__ void __ide_mm_insw(unsigned long port, void *addr, u32 count)
static __inline__ void __ide_mm_insl(unsigned long port, void *addr, u32 count) static __inline__ void __ide_mm_insl(unsigned long port, void *addr, u32 count)
{ {
while (count--) { while (count--) {
*(u32 *)addr = readl(port); *(u32 *)addr = __raw_readl(port);
addr += 4; addr += 4;
} }
} }
...@@ -109,7 +86,7 @@ static __inline__ void __ide_mm_insl(unsigned long port, void *addr, u32 count) ...@@ -109,7 +86,7 @@ static __inline__ void __ide_mm_insl(unsigned long port, void *addr, u32 count)
static __inline__ void __ide_mm_outsw(unsigned long port, void *addr, u32 count) static __inline__ void __ide_mm_outsw(unsigned long port, void *addr, u32 count)
{ {
while (count--) { while (count--) {
writew(*(u16 *)addr, port); __raw_writew(*(u16 *)addr, port);
addr += 2; addr += 2;
} }
} }
...@@ -117,7 +94,7 @@ static __inline__ void __ide_mm_outsw(unsigned long port, void *addr, u32 count) ...@@ -117,7 +94,7 @@ static __inline__ void __ide_mm_outsw(unsigned long port, void *addr, u32 count)
static __inline__ void __ide_mm_outsl(unsigned long port, void *addr, u32 count) static __inline__ void __ide_mm_outsl(unsigned long port, void *addr, u32 count)
{ {
while (count--) { while (count--) {
writel(*(u32 *)addr, port); __raw_writel(*(u32 *)addr, port);
addr += 4; addr += 4;
} }
} }
......
include/asm-parisc/io.h
View file @ fa9fcf5f
...@@ -13,6 +13,12 @@ ...@@ -13,6 +13,12 @@
#include <linux/types.h> #include <linux/types.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
extern unsigned long parisc_vmerge_boundary;
extern unsigned long parisc_vmerge_max_size;
#define BIO_VMERGE_BOUNDARY parisc_vmerge_boundary
#define BIO_VMERGE_MAX_SIZE parisc_vmerge_max_size
#define virt_to_phys(a) ((unsigned long)__pa(a)) #define virt_to_phys(a) ((unsigned long)__pa(a))
#define phys_to_virt(a) __va(a) #define phys_to_virt(a) __va(a)
#define virt_to_bus virt_to_phys #define virt_to_bus virt_to_phys
......
include/asm-parisc/ioctl.h
View file @ fa9fcf5f
/* $Id: ioctl.h,v 1.2 1999/12/29 22:18:15 willy Exp $ /*
* Linux/PA-RISC Project (http://www.parisc-linux.org/)
* Copyright (C) 1999,2003 Matthew Wilcox < willy at debian . org >
* portions from "linux/ioctl.h for Linux" by H.H. Bergman.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* *
* linux/ioctl.h for Linux by H.H. Bergman. * This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/ */
#ifndef _ASM_PARISC_IOCTL_H #ifndef _ASM_PARISC_IOCTL_H
#define _ASM_PARISC_IOCTL_H #define _ASM_PARISC_IOCTL_H
......
include/asm-parisc/keyboard.h deleted 100644 → 0
View file @ 1e04a796
/*
* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
* ---------------------------------------------------------------
* This file will be removed as soon as we have converted
* hp_psaux.c and hp_keyb.c to the input layer !
*
*/
/*
* linux/include/asm-parisc/keyboard.h
*
* Original by Geert Uytterhoeven
* updates by Alex deVries <adevries@thepuffingroup.com>
* portions copyright (1999) The Puffin Group
* mostly rewritten by Philipp Rumpf <prumpf@tux.org>,
* Copyright 2000 Philipp Rumpf
*/
/*
* We try to keep the amount of generic code as low as possible -
* we want to support all HIL, PS/2, and untranslated USB keyboards
*/
#ifndef _PARISC_KEYBOARD_H
#define _PARISC_KEYBOARD_H
#ifdef __KERNEL__
#include <linux/kernel.h>
#include <linux/kd.h>
/* These are basically the generic functions / variables. The only
* unexpected detail is the initialization sequence for the keyboard
* driver is something like this:
*
* detect keyboard port
* detect keyboard
* call register_kbd_ops
* wait for init_hw
*
* only after init_hw has been called you're allowed to call
* handle_scancode. This means you either have to be extremely
* careful or use a global flag or something - I strongly suggest
* the latter. prumpf */
extern struct kbd_ops {
int (*setkeycode)(unsigned int, unsigned int);
int (*getkeycode)(unsigned int);
int (*translate)(unsigned char, unsigned char *, char);
char (*unexpected_up)(unsigned char);
void (*leds)(unsigned char);
void (*init_hw)(void);
/* Keyboard driver resource allocation */
int (*kbd_request_irq)(void (*handler)(int, void *, struct pt_regs *));
unsigned char sysrq_key;
unsigned char *sysrq_xlate;
} kbd_ops;
#define kbd_setkeycode (*kbd_ops->setkeycode)
#define kbd_getkeycode (*kbd_ops->getkeycode)
#define kbd_translate (*kbd_ops->translate)
#define kbd_unexpected_up (*kbd_ops->unexpected_up)
#define kbd_leds (*kbd_ops->leds)
#define kbd_init_hw (*kbd_ops->init_hw)
#define SYSRQ_KEY (kbd_ops->sysrq_key)
#define kbd_sysrq_xlate (kbd_ops->sysrq_xlate)
/* Do the actual calls via kbd_ops vector */
#define kbd_request_irq(handler) kbd_ops->kbd_request_irq(handler)
extern unsigned char hp_ps2kbd_sysrq_xlate[128]; /* from drivers/char/hp_keyb.c */
extern void unregister_kbd_ops(void);
extern void register_kbd_ops(struct kbd_ops *ops);
#endif /* __KERNEL__ */
#endif /* __ASMPARISC_KEYBOARD_H */
include/asm-parisc/md.h deleted 100644 → 0
View file @ 1e04a796
/* $Id: md.h,v 1.1.1.1 1999/03/15 19:41:02 pjlahaie Exp $
* md.h: High speed xor_block operation for RAID4/5
*
*/
#ifndef __ASM_MD_H
#define __ASM_MD_H
/* #define HAVE_ARCH_XORBLOCK */
#define MD_XORBLOCK_ALIGNMENT sizeof(long)
#endif /* __ASM_MD_H */
include/asm-parisc/namei.h
View file @ fa9fcf5f
/* $Id: namei.h,v 1.1.1.1 1999/03/15 19:41:02 pjlahaie Exp $ /* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
* linux/include/asm-parisc/namei.h * linux/include/asm-parisc/namei.h
* *
* Included from linux/fs/namei.c * Included from linux/fs/namei.c
......
include/asm-parisc/pci.h
View file @ fa9fcf5f
...@@ -43,7 +43,7 @@ ...@@ -43,7 +43,7 @@
** **
** This is the "common" or "base" data structure which HBA drivers ** This is the "common" or "base" data structure which HBA drivers
** (eg Dino or LBA) are required to place at the top of their own ** (eg Dino or LBA) are required to place at the top of their own
** dev->sysdata structure. I've heard this called "C inheritance" too. ** platform_data structure. I've heard this called "C inheritance" too.
** **
** Data needed by pcibios layer belongs here. ** Data needed by pcibios layer belongs here.
*/ */
......
include/asm-parisc/semaphore.h
View file @ fa9fcf5f
#ifndef _ASM_PARISC_SEMAPHORE_H /* SMP- and interrupt-safe semaphores.
#define _ASM_PARISC_SEMAPHORE_H * PA-RISC version by Matthew Wilcox
/*
* SMP- and interrupt-safe semaphores.
* *
* (C) Copyright 1996 Linus Torvalds * Linux/PA-RISC Project (http://www.parisc-linux.org/)
* Copyright (C) 1996 Linus Torvalds
* Copyright (C) 1999-2001 Matthew Wilcox < willy at debian d0T org >
* Copyright (C) 2000 Grant Grundler < grundler a debian org >
* *
* PA-RISC version by Matthew Wilcox * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/ */
#ifndef _ASM_PARISC_SEMAPHORE_H
#define _ASM_PARISC_SEMAPHORE_H
#include <linux/spinlock.h> #include <linux/spinlock.h>
#include <linux/wait.h> #include <linux/wait.h>
#include <linux/rwsem.h> #include <linux/rwsem.h>
......
include/asm-parisc/superio.h
View file @ fa9fcf5f
...@@ -81,9 +81,12 @@ struct superio_device { ...@@ -81,9 +81,12 @@ struct superio_device {
|| ((x)->device == PCI_DEVICE_ID_NS_87560_LIO) \ || ((x)->device == PCI_DEVICE_ID_NS_87560_LIO) \
|| ((x)->device == PCI_DEVICE_ID_NS_87560_USB) ) ) || ((x)->device == PCI_DEVICE_ID_NS_87560_USB) ) )
struct hwif_s;
extern void superio_inform_irq(int irq); extern void superio_inform_irq(int irq);
extern void superio_serial_init(void); /* called by rs_init() */ extern void superio_serial_init(void); /* called by rs_init() */
extern int superio_fixup_irq(struct pci_dev *pcidev); /* called by iosapic */ extern int superio_fixup_irq(struct pci_dev *pcidev); /* called by iosapic */
extern int superio_get_ide_irq(void); extern void superio_fixup_pci(struct pci_dev *pdev);
extern void superio_ide_init_iops (struct hwif_s *hwif);
#endif /* _PARISC_SUPERIO_H */ #endif /* _PARISC_SUPERIO_H */
sound/parisc/harmony.c
View file @ fa9fcf5f
...@@ -358,7 +358,7 @@ static void snd_harmony_enable_interrupts(snd_card_harmony_t *chip) ...@@ -358,7 +358,7 @@ static void snd_harmony_enable_interrupts(snd_card_harmony_t *chip)
* The interrupt routine must provide adresse of next physical pages * The interrupt routine must provide adresse of next physical pages
* used by harmony * used by harmony
*/ */
void snd_card_harmony_interrupt(int irq, void *dev, struct pt_regs *regs) static int snd_card_harmony_interrupt(int irq, void *dev, struct pt_regs *regs)
{ {
snd_card_harmony_t *harmony = (snd_card_harmony_t *)dev; snd_card_harmony_t *harmony = (snd_card_harmony_t *)dev;
u32 dstatus = 0; u32 dstatus = 0;
...@@ -414,6 +414,8 @@ void snd_card_harmony_interrupt(int irq, void *dev, struct pt_regs *regs) ...@@ -414,6 +414,8 @@ void snd_card_harmony_interrupt(int irq, void *dev, struct pt_regs *regs)
} }
} }
snd_harmony_enable_interrupts(harmony); snd_harmony_enable_interrupts(harmony);
return IRQ_HANDLED;
} }
/* /*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7