Commit faa7a4c0 authored by Linus Torvalds's avatar Linus Torvalds

Merge bk://linux-ntfs.bkbits.net/ntfs-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux
parents 62054d49 9da9210d
......@@ -1110,7 +1110,7 @@ S: Maintained
IOC3 DRIVER
P: Ralf Baechle
M: ralf@oss.sgi.com
M: ralf@linux-mips.org
L: linux-mips@linux-mips.org
S: Maintained
......@@ -1352,6 +1352,13 @@ P: Zach Brown
M: zab@zabbo.net
S: Odd Fixes
MARVELL MV64340 ETHERNET DRIVER
P: Manish Lachwani
M: Manish_Lachwani@pmc-sierra.com
L: linux-mips@linux-mips.org
L: netdev@oss.sgi.com
S: Supported
MATROX FRAMEBUFFER DRIVER
P: Petr Vandrovec
M: vandrove@vc.cvut.cz
......@@ -1372,7 +1379,7 @@ S: Maintained
MIPS
P: Ralf Baechle
M: ralf@gnu.org
M: ralf@linux-mips.org
W: http://oss.sgi.com/mips/mips-howto.html
L: linux-mips@linux-mips.org
S: Maintained
......
......@@ -394,6 +394,7 @@ static inline unsigned long get_vflags(struct kernel_vm86_regs * regs)
if (VEFLAGS & VIF_MASK)
flags |= IF_MASK;
flags |= IOPL_MASK;
return flags | (VEFLAGS & current->thread.v86mask);
}
......
......@@ -188,11 +188,16 @@ static int __is_prefetch(struct pt_regs *regs, unsigned long addr)
return prefetch;
}
static inline int is_prefetch(struct pt_regs *regs, unsigned long addr)
static inline int is_prefetch(struct pt_regs *regs, unsigned long addr,
unsigned long error_code)
{
if (unlikely(boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86 >= 6))
boot_cpu_data.x86 >= 6)) {
/* Catch an obscure case of prefetch inside an NX page. */
if (nx_enabled && (error_code & 16))
return 0;
return __is_prefetch(regs, addr);
}
return 0;
}
......@@ -374,7 +379,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code)
* Valid to do another page fault here because this one came
* from user space.
*/
if (is_prefetch(regs, address))
if (is_prefetch(regs, address, error_code))
return;
tsk->thread.cr2 = address;
......@@ -415,7 +420,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code)
* had been triggered by is_prefetch fixup_exception would have
* handled it.
*/
if (is_prefetch(regs, address))
if (is_prefetch(regs, address, error_code))
return;
/*
......@@ -426,18 +431,11 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code)
bust_spinlocks(1);
#ifdef CONFIG_X86_PAE
{
pgd_t *pgd;
pmd_t *pmd;
if (error_code & 16) {
pte_t *pte = lookup_address(address);
pgd = init_mm.pgd + pgd_index(address);
if (pgd_present(*pgd)) {
pmd = pmd_offset(pgd, address);
if (pmd_val(*pmd) & _PAGE_NX)
printk(KERN_CRIT "kernel tried to access NX-protected page - exploit attempt? (uid: %d)\n", current->uid);
}
if (pte && pte_present(*pte) && !pte_exec_kernel(*pte))
printk(KERN_CRIT "kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n", current->uid);
}
#endif
if (address < PAGE_SIZE)
......@@ -492,7 +490,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code)
goto no_context;
/* User space => ok to do another page fault */
if (is_prefetch(regs, address))
if (is_prefetch(regs, address, error_code))
return;
tsk->thread.cr2 = address;
......
......@@ -437,7 +437,7 @@ static int __init noexec_setup(char *str)
__setup("noexec=", noexec_setup);
#ifdef CONFIG_X86_PAE
static int use_nx = 0;
int nx_enabled = 0;
static void __init set_nx(void)
{
......@@ -449,7 +449,7 @@ static void __init set_nx(void)
rdmsr(MSR_EFER, l, h);
l |= EFER_NX;
wrmsr(MSR_EFER, l, h);
use_nx = 1;
nx_enabled = 1;
__supported_pte_mask |= _PAGE_NX;
}
}
......@@ -470,7 +470,7 @@ int __init set_kernel_exec(unsigned long vaddr, int enable)
pte = lookup_address(vaddr);
BUG_ON(!pte);
if (pte_val(*pte) & _PAGE_NX)
if (!pte_exec_kernel(*pte))
ret = 0;
if (enable)
......@@ -495,7 +495,7 @@ void __init paging_init(void)
{
#ifdef CONFIG_X86_PAE
set_nx();
if (use_nx)
if (nx_enabled)
printk("NX (Execute Disable) protection: active\n");
#endif
......
......@@ -37,6 +37,7 @@
*/
#include <linux/config.h>
#include <linux/efi.h>
#include <linux/kernel.h>
#include <asm/pal.h>
#include <asm/sal.h>
#include <asm/sn/sn_sal.h>
......@@ -78,7 +79,6 @@
#define BOOT_PARAM_ADDR 0x40000
#define MAX(i,j) ((i) > (j) ? (i) : (j))
#define MIN(i,j) ((i) < (j) ? (i) : (j))
#define ABS(i) ((i) > 0 ? (i) : -(i))
#define ALIGN8(p) (((long)(p) +7) & ~7)
#define FPROM_BUG() do {while (1);} while (0)
......@@ -670,7 +670,7 @@ sys_fw_init (const char *args, int arglen, int bsp)
for (i=0; i<=max_nasid; i++)
for (j=0; j<=max_nasid; j++)
if (nasid_present(i) && nasid_present(j))
*(cp+PROXIMITY_DOMAIN(i)*acpi_slit->localities+PROXIMITY_DOMAIN(j)) = 10 + MIN(254, 5*ABS(i-j));
*(cp+PROXIMITY_DOMAIN(i)*acpi_slit->localities+PROXIMITY_DOMAIN(j)) = 10 + MIN(254, 5*abs(i-j));
cp = acpi_slit->entry + acpi_slit->localities*acpi_slit->localities;
acpi_checksum(&acpi_slit->header, cp - (char*)acpi_slit);
......
......@@ -91,13 +91,6 @@ config IBM_WORKPAD
select IRQ_CPU
select ISA
config NEC_EAGLE
bool "Support for NEC Eagle/Hawk board"
select DMA_NONCOHERENT
select IRQ_CPU
depends on MACH_VR41XX
select HW_HAS_PCI
config TANBAC_TB0226
bool "Support for TANBAC TB0226 (Mbase)"
depends on MACH_VR41XX
......@@ -311,6 +304,7 @@ config MOMENCO_OCELOT_G
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
select PCI_MARVELL
select RM7000_CPU_SCACHE
help
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
......@@ -321,6 +315,8 @@ config MOMENCO_OCELOT_C
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_MV64340
select PCI_MARVELL
select RM7000_CPU_SCACHE
help
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
......@@ -332,7 +328,9 @@ config MOMENCO_JAGUAR_ATX
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
select IRQ_MV64340
select LIMITED_DMA
select PCI_MARVELL
select RM7000_CPU_SCACHE
help
The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
......@@ -885,7 +883,7 @@ config MIPS_NILE4
config CPU_LITTLE_ENDIAN
bool "Generate little endian code"
default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || HP_LASERJET || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || NEC_EAGLE || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || HP_LASERJET || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
default n if BAGET_MIPS || MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
help
Some MIPS machines can be configured for either little or big endian
......@@ -898,6 +896,9 @@ config IRQ_CPU
config IRQ_CPU_RM7K
bool
config IRQ_MV64340
bool
config DDB5XXX_COMMON
bool
depends on DDB5074 || DDB5476 || DDB5477
......@@ -918,16 +919,14 @@ config MIPS_GT64120
depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
default y
config MIPS_MV64340
bool
depends on MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_C
default y
config MIPS_TX3927
bool
depends on TOSHIBA_JMR3927
default y
config PCI_MARVELL
bool
config ITE_BOARD_GEN
bool
depends on MIPS_IVR || MIPS_ITE8172
......
......@@ -463,12 +463,6 @@ load-$(CONFIG_NEC_OSPREY) += 0x80002000
core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/
cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx
#
# NEC Eagle/Hawk (VR4122/VR4131) board
#
core-$(CONFIG_NEC_EAGLE) += arch/mips/vr41xx/nec-eagle/
load-$(CONFIG_NEC_EAGLE) += 0x80000000
#
# ZAO Networks Capcella (VR4131)
#
......
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -143,6 +144,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -169,7 +171,7 @@ CONFIG_TRAD_SIGNALS=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
......@@ -212,13 +214,13 @@ CONFIG_BLK_DEV_SD=y
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
......@@ -321,6 +323,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -650,5 +653,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -273,6 +275,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -54,7 +55,6 @@ CONFIG_KMOD=y
CONFIG_MACH_VR41XX=y
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
# CONFIG_NEC_EAGLE is not set
# CONFIG_TANBAC_TB0226 is not set
# CONFIG_TANBAC_TB0229 is not set
# CONFIG_VICTOR_MPC30X is not set
......@@ -147,6 +147,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -172,7 +173,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -185,6 +186,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
......@@ -283,6 +285,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -624,5 +627,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -137,6 +138,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -163,7 +165,7 @@ CONFIG_TRAD_SIGNALS=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -176,6 +178,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
......@@ -270,6 +273,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -600,5 +604,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -167,6 +168,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -293,6 +295,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -634,6 +637,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -688,6 +692,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -165,6 +166,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -291,6 +293,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -629,6 +632,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -683,6 +687,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -167,6 +168,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -259,6 +261,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
......@@ -372,6 +375,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -706,6 +710,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -760,6 +765,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -139,6 +140,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -166,7 +168,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -179,6 +181,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
......@@ -282,6 +285,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -485,6 +489,7 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Graphics support
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
......@@ -640,5 +645,6 @@ CONFIG_CMDLINE="ip=any"
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -138,6 +139,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -163,7 +165,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -251,6 +253,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -306,6 +309,7 @@ CONFIG_PCNET32=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_LAN_SAA9730 is not set
#
......@@ -599,5 +603,6 @@ CONFIG_CMDLINE="ip=any"
#
# Library routines
#
CONFIG_CRC16=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -137,6 +138,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -277,6 +279,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -554,7 +557,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
......@@ -585,5 +587,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -54,7 +55,6 @@ CONFIG_KMOD=y
CONFIG_MACH_VR41XX=y
CONFIG_CASIO_E55=y
# CONFIG_IBM_WORKPAD is not set
# CONFIG_NEC_EAGLE is not set
# CONFIG_TANBAC_TB0226 is not set
# CONFIG_TANBAC_TB0229 is not set
# CONFIG_VICTOR_MPC30X is not set
......@@ -143,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -178,6 +179,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
......@@ -277,6 +279,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -603,5 +606,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
This diff is collapsed.
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -146,6 +147,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -171,7 +173,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -258,6 +260,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -592,5 +595,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/d
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -146,6 +147,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -252,6 +254,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -549,5 +552,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -29,6 +29,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -148,6 +149,7 @@ CONFIG_BINFMT_IRIX=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -362,6 +364,8 @@ CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
#
# IPv6: Netfilter Configuration
......@@ -438,8 +442,11 @@ CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
#
......@@ -696,6 +703,8 @@ CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -767,7 +776,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
......@@ -801,6 +809,7 @@ CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
......@@ -855,6 +864,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -27,6 +27,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -153,6 +154,7 @@ CONFIG_BINFMT_ELF32=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -178,7 +180,7 @@ CONFIG_BINFMT_ELF32=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
#
......@@ -218,12 +220,12 @@ CONFIG_SCSI_SPI_ATTRS=y
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
......@@ -338,6 +340,7 @@ CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_DELAY=y
# CONFIG_NET_SCH_INGRESS is not set
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
......@@ -346,8 +349,11 @@ CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
#
......@@ -657,7 +663,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
......@@ -707,6 +712,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -20,6 +20,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
......@@ -27,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -141,6 +143,7 @@ CONFIG_BINFMT_ELF32=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -167,7 +170,7 @@ CONFIG_BINFMT_ELF32=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
#
......@@ -208,6 +211,7 @@ CONFIG_SCSI_LOGGING=y
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
......@@ -219,7 +223,6 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
......@@ -321,6 +324,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -632,7 +636,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
......@@ -663,5 +666,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -21,6 +21,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
......@@ -28,6 +29,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -141,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -231,6 +234,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
......@@ -326,6 +330,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -650,5 +655,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -21,6 +21,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
......@@ -28,6 +29,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -141,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -166,7 +169,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -179,6 +182,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
......@@ -276,6 +280,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -604,5 +609,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -28,6 +28,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -39,7 +40,10 @@ CONFIG_IOSCHED_CFQ=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
# Machine selection
......@@ -73,7 +77,8 @@ CONFIG_LIMITED_DMA=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_MIPS_MV64340=y
CONFIG_IRQ_MV64340=y
CONFIG_PCI_MARVELL=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
......@@ -140,6 +145,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -164,7 +170,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -234,6 +240,7 @@ CONFIG_IP_PNP_BOOTP=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -286,6 +293,7 @@ CONFIG_EEPRO100=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
#
# Ethernet (1000 Mbit)
......@@ -538,5 +546,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -137,6 +138,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -162,7 +164,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -250,6 +252,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -460,6 +463,7 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Graphics support
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
......@@ -612,5 +616,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -148,6 +149,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -229,7 +231,7 @@ CONFIG_MTD_LASAT=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -242,6 +244,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
......@@ -365,6 +368,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -698,5 +702,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -150,6 +151,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -175,7 +177,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
......@@ -264,6 +266,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -319,6 +322,7 @@ CONFIG_PCNET32=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_LAN_SAA9730 is not set
#
......@@ -613,5 +617,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -273,6 +275,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -54,7 +55,6 @@ CONFIG_KMOD=y
CONFIG_MACH_VR41XX=y
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
# CONFIG_NEC_EAGLE is not set
# CONFIG_TANBAC_TB0226 is not set
# CONFIG_TANBAC_TB0229 is not set
CONFIG_VICTOR_MPC30X=y
......@@ -147,6 +147,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -172,7 +173,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -261,6 +262,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -607,6 +609,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -273,6 +275,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -27,6 +27,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -74,7 +75,8 @@ CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_IRQ_CPU=y
CONFIG_MIPS_MV64340=y
CONFIG_IRQ_MV64340=y
CONFIG_PCI_MARVELL=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
......@@ -139,6 +141,7 @@ CONFIG_BINFMT_ELF32=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -164,7 +167,7 @@ CONFIG_BINFMT_ELF32=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
#
......@@ -250,6 +253,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -580,5 +584,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -144,6 +145,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -250,6 +252,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -548,5 +551,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -27,6 +27,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -75,6 +76,7 @@ CONFIG_DMA_NONCOHERENT=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_PCI_MARVELL=y
CONFIG_SWAP_IO_SPACE=y
# CONFIG_SYSCLK_75 is not set
# CONFIG_SYSCLK_83 is not set
......@@ -142,6 +144,7 @@ CONFIG_BINFMT_ELF32=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -167,7 +170,7 @@ CONFIG_BINFMT_ELF32=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
#
......@@ -253,6 +256,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -583,5 +587,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -135,6 +136,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -242,6 +244,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -540,5 +543,6 @@ CONFIG_CMDLINE="ip=bootp ether=46,0x03fe0300,eth0"
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -273,6 +275,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -273,6 +275,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -150,6 +151,7 @@ CONFIG_MMU=y
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_YENTA is not set
CONFIG_PD6729=m
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
......@@ -173,6 +175,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -200,7 +203,7 @@ CONFIG_TRAD_SIGNALS=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -213,6 +216,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
......@@ -357,6 +361,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -721,6 +726,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -775,6 +781,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -149,6 +150,7 @@ CONFIG_MMU=y
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_YENTA is not set
CONFIG_PD6729=m
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_AU1X00=m
......@@ -172,6 +174,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -199,7 +202,7 @@ CONFIG_TRAD_SIGNALS=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -212,6 +215,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
......@@ -356,6 +360,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -720,6 +725,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -774,6 +780,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -21,6 +21,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
......@@ -29,6 +30,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -152,6 +154,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -218,7 +221,7 @@ CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_LBD is not set
......@@ -261,6 +264,7 @@ CONFIG_SCSI_SPI_ATTRS=y
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
......@@ -270,7 +274,6 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
......@@ -335,6 +338,9 @@ CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
#
# Fusion MPT device support
......@@ -453,6 +459,8 @@ CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
#
# IPv6: Netfilter Configuration
......@@ -554,8 +562,11 @@ CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
#
......@@ -655,6 +666,7 @@ CONFIG_EEPRO100=m
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_LAN_SAA9730 is not set
# CONFIG_NET_POCKET is not set
......@@ -880,6 +892,7 @@ CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
......@@ -1089,6 +1102,8 @@ CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
......@@ -1148,6 +1163,7 @@ CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_POSIX is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
......@@ -1177,7 +1193,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
......@@ -1211,6 +1226,7 @@ CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
......@@ -1265,6 +1281,7 @@ CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
......
......@@ -27,6 +27,7 @@ CONFIG_LOG_BUF_SHIFT=15
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -179,6 +180,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -204,7 +206,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=9220
CONFIG_BLK_DEV_INITRD=y
......@@ -219,6 +221,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
......@@ -317,6 +320,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -649,6 +653,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
......@@ -27,6 +27,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -139,6 +140,7 @@ CONFIG_EMBEDDED_RAMDISK_IMAGE="ramdisk.gz"
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -428,5 +430,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -54,7 +55,6 @@ CONFIG_KMOD=y
CONFIG_MACH_VR41XX=y
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
# CONFIG_NEC_EAGLE is not set
CONFIG_TANBAC_TB0226=y
# CONFIG_TANBAC_TB0229 is not set
# CONFIG_VICTOR_MPC30X is not set
......@@ -143,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -178,6 +179,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
......@@ -310,6 +312,7 @@ CONFIG_SYN_COOKIES=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -553,6 +556,8 @@ CONFIG_ZISOFS_FS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -644,6 +649,7 @@ CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -679,6 +685,7 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -54,7 +55,6 @@ CONFIG_KMOD=y
CONFIG_MACH_VR41XX=y
# CONFIG_CASIO_E55 is not set
# CONFIG_IBM_WORKPAD is not set
# CONFIG_NEC_EAGLE is not set
# CONFIG_TANBAC_TB0226 is not set
CONFIG_TANBAC_TB0229=y
# CONFIG_VICTOR_MPC30X is not set
......@@ -148,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -174,7 +175,7 @@ CONFIG_TRAD_SIGNALS=y
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
......@@ -271,6 +272,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -544,6 +546,8 @@ CONFIG_ZISOFS_FS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -635,6 +639,7 @@ CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -670,6 +675,7 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -54,7 +55,6 @@ CONFIG_KMOD=y
CONFIG_MACH_VR41XX=y
# CONFIG_CASIO_E55 is not set
CONFIG_IBM_WORKPAD=y
# CONFIG_NEC_EAGLE is not set
# CONFIG_TANBAC_TB0226 is not set
# CONFIG_TANBAC_TB0229 is not set
# CONFIG_VICTOR_MPC30X is not set
......@@ -143,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -178,6 +179,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
......@@ -277,6 +279,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -607,5 +610,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -273,6 +275,7 @@ CONFIG_XFRM=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -661,6 +665,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
#
# Library routines
#
CONFIG_CRC16=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
......@@ -28,6 +28,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -137,6 +138,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -161,7 +163,7 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -232,6 +234,7 @@ CONFIG_IP_PNP_BOOTP=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -517,5 +520,6 @@ CONFIG_CMDLINE=""
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -29,6 +29,7 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -148,6 +149,7 @@ CONFIG_BINFMT_IRIX=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Memory Technology Devices (MTD)
......@@ -362,6 +364,8 @@ CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
#
# IPv6: Netfilter Configuration
......@@ -438,8 +442,11 @@ CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
#
......@@ -696,6 +703,8 @@ CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -767,7 +776,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
......@@ -801,6 +809,7 @@ CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
......@@ -855,6 +864,7 @@ CONFIG_CRYPTO_CRC32C=m
#
# Library routines
#
CONFIG_CRC16=m
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
......
......@@ -38,7 +38,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
obj-$(CONFIG_MIPS_MV64340) += irq-mv6434x.o
obj-$(CONFIG_IRQ_MV64340) += irq-mv6434x.o
obj-$(CONFIG_MIPS32) += scall32-o32.o
obj-$(CONFIG_MIPS64) += scall64-64.o
......
......@@ -44,7 +44,7 @@ static inline void mask_mv64340_irq(unsigned int irq)
MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value);
} else {
value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
value &= ~(1 << (irq - (irq_base - 32)));
value &= ~(1 << (irq - irq_base - 32));
MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value);
}
}
......@@ -60,7 +60,7 @@ static inline void unmask_mv64340_irq(unsigned int irq)
MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value);
} else {
value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
value |= 1 << (irq - (irq_base - 32));
value |= 1 << (irq - irq_base - 32);
MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value);
}
}
......
......@@ -9,7 +9,7 @@
* Copyright (C) 1999 Silicon Graphics, Inc.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000, 01 MIPS Technologies, Inc.
* Copyright (C) 2002, 2003 Maciej W. Rozycki
* Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
*/
#include <linux/config.h>
#include <linux/init.h>
......@@ -23,6 +23,7 @@
#include <asm/bootinfo.h>
#include <asm/branch.h>
#include <asm/break.h>
#include <asm/cpu.h>
#include <asm/fpu.h>
#include <asm/module.h>
......@@ -541,9 +542,12 @@ asmlinkage void do_bp(struct pt_regs *regs)
/*
* There is the ancient bug in the MIPS assemblers that the break
* code starts left to bit 16 instead to bit 6 in the opcode.
* Gas is bug-compatible ...
* Gas is bug-compatible, but not always, grrr...
* We handle both cases with a simple heuristics. --macro
*/
bcode = ((opcode >> 16) & ((1 << 20) - 1));
bcode = ((opcode >> 6) & ((1 << 20) - 1));
if (bcode < (1 << 10))
bcode <<= 10;
/*
* (A short test says that IRIX 5.3 sends SIGTRAP for all break
......@@ -552,9 +556,9 @@ asmlinkage void do_bp(struct pt_regs *regs)
* But should we continue the brokenness??? --macro
*/
switch (bcode) {
case 6:
case 7:
if (bcode == 7)
case BRK_OVERFLOW << 10:
case BRK_DIVZERO << 10:
if (bcode == (BRK_DIVZERO << 10))
info.si_code = FPE_INTDIV;
else
info.si_code = FPE_INTOVF;
......@@ -580,7 +584,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
/* Immediate versions don't provide a code. */
if (!(opcode & OPCODE))
tcode = ((opcode >> 6) & ((1 << 20) - 1));
tcode = ((opcode >> 6) & ((1 << 10) - 1));
/*
* (A short test says that IRIX 5.3 sends SIGTRAP for all trap
......@@ -589,9 +593,9 @@ asmlinkage void do_tr(struct pt_regs *regs)
* But should we continue the brokenness??? --macro
*/
switch (tcode) {
case 6:
case 7:
if (tcode == 7)
case BRK_OVERFLOW:
case BRK_DIVZERO:
if (tcode == BRK_DIVZERO)
info.si_code = FPE_INTDIV;
else
info.si_code = FPE_INTOVF;
......
......@@ -147,24 +147,30 @@ static void rm7k_sc_disable(void)
clear_c0_config(1<<3); /* CONF_SE */
}
static inline int __init rm7k_sc_probe(void)
struct bcache_ops rm7k_sc_ops = {
.bc_enable = rm7k_sc_enable,
.bc_disable = rm7k_sc_disable,
.bc_wback_inv = rm7k_sc_wback_inv,
.bc_inv = rm7k_sc_inv
};
void __init rm7k_sc_init(void)
{
unsigned int config = read_c0_config();
if ((config >> 31) & 1)
return 0;
if ((config >> 31) & 1) /* Bit 31 set -> no S-Cache */
return;
printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
(scache_size >> 10), sc_lsize);
if ((config >> 3) & 1) /* CONF_SE */
return 1;
if (!((config >> 3) & 1)) /* CONF_SE */
rm7k_sc_enable();
/*
* While we're at it let's deal with the tertiary cache.
*/
if ((config >> 17) & 1)
return 1;
if (!((config >> 17) & 1)) {
/*
* We can't enable the L3 cache yet. There may be board-specific
......@@ -181,21 +187,7 @@ static inline int __init rm7k_sc_probe(void)
if ((config >> 12) & 1)
rm7k_tcache_enabled = 1;
}
return 1;
}
struct bcache_ops rm7k_sc_ops = {
.bc_enable = rm7k_sc_enable,
.bc_disable = rm7k_sc_disable,
.bc_wback_inv = rm7k_sc_wback_inv,
.bc_inv = rm7k_sc_inv
};
void __init rm7k_sc_init(void)
{
if (rm7k_sc_probe()) {
rm7k_sc_enable();
bcops = &rm7k_sc_ops;
}
}
......@@ -33,7 +33,6 @@ extern void ja_setup_console(void);
struct callvectors *debug_vectors;
extern unsigned long mv64340_base;
extern unsigned long cpu_clock;
const char *get_system_type(void)
......@@ -185,13 +184,13 @@ void __init prom_init(void)
break;
if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
mv64340_base = simple_strtol(ptr + strlen("gtbase="),
marvell_base = simple_strtol(ptr + strlen("gtbase="),
NULL, 16);
if ((mv64340_base & 0xffffffff00000000) == 0)
mv64340_base |= 0xffffffff00000000;
if ((marvell_base & 0xffffffff00000000) == 0)
marvell_base |= 0xffffffff00000000;
printk("mv64340_base set to 0x%016lx\n", mv64340_base);
printk("marvell_base set to 0x%016lx\n", marvell_base);
}
if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
......@@ -218,7 +217,7 @@ void __init prom_init(void)
while (*env) {
if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
mv64340_base = simple_strtol(*env + strlen("gtbase="),
marvell_base = simple_strtol(*env + strlen("gtbase="),
NULL, 16);
}
if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
......
......@@ -46,6 +46,7 @@
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/swap.h>
#include <linux/ioport.h>
......@@ -119,19 +120,21 @@ static __init void wire_stupidity_into_tlb(void)
// add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000),
// 0xfe000000UL, PM_16M);
mv64340_base = 0xf4000000;
marvell_base = 0xf4000000;
//mv64340_sram_base = 0xfe000000; /* Currently unused */
#endif
}
unsigned long mv64340_base = 0xf4000000L;
unsigned long marvell_base = 0xf4000000L;
unsigned long ja_fpga_base = JAGUAR_ATX_CS0_ADDR;
unsigned long uart_base = 0xfd000000L;
static unsigned char *rtc_base = (unsigned char*) 0xfc800000L;
EXPORT_SYMBOL(marvell_base);
static __init int per_cpu_mappings(void)
{
mv64340_base = (unsigned long) ioremap(0xf4000000, 0x10000);
marvell_base = (unsigned long) ioremap(0xf4000000, 0x10000);
ja_fpga_base = (unsigned long) ioremap(JAGUAR_ATX_CS0_ADDR, 0x1000);
uart_base = (unsigned long) ioremap(0xfd000000UL, 0x1000);
rtc_base = ioremap(0xfc000000UL, 0x8000);
......@@ -233,12 +236,14 @@ static struct resource mv_pci_mem0_resource = {
.flags = IORESOURCE_MEM
};
extern struct pci_ops mv64340_bus0_pci_ops;
static struct pci_controller mv_bus0_controller = {
.pci_ops = &mv64340_bus0_pci_ops,
static struct mv_pci_controller mv_bus0_controller = {
.pcic = {
.pci_ops = &mv_pci_ops,
.mem_resource = &mv_pci_mem0_resource,
.io_resource = &mv_pci_io_mem0_resource,
},
.config_addr = MV64340_PCI_0_CONFIG_ADDR,
.config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
};
static uint32_t mv_io_base, mv_io_size;
......@@ -257,12 +262,12 @@ static void ja_pci0_init(void)
mv_pci_io_mem0_resource.end = io_size - 1;
mv_pci_mem0_resource.start = mem0_base;
mv_pci_mem0_resource.end = mem0_base + mem0_size - 1;
mv_bus0_controller.mem_offset = mem0_base;
mv_bus0_controller.io_offset = 0;
mv_bus0_controller.pcic.mem_offset = mem0_base;
mv_bus0_controller.pcic.io_offset = 0;
ioport_resource.end = io_size - 1;
register_pci_controller(&mv_bus0_controller);
register_pci_controller(&mv_bus0_controller.pcic);
mv_io_base = io_base;
mv_io_size = io_size;
......@@ -278,12 +283,14 @@ static struct resource mv_pci_mem1_resource = {
.flags = IORESOURCE_MEM
};
extern struct pci_ops mv64340_bus1_pci_ops;
static struct pci_controller mv_bus1_controller = {
.pci_ops = &mv64340_bus1_pci_ops,
static struct mv_pci_controller mv_bus1_controller = {
.pcic = {
.pci_ops = &mv_pci_ops,
.mem_resource = &mv_pci_mem1_resource,
.io_resource = &mv_pci_io_mem1_resource,
},
.config_addr = MV64340_PCI_1_CONFIG_ADDR,
.config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
};
static __init void ja_pci1_init(void)
......@@ -305,12 +312,12 @@ static __init void ja_pci1_init(void)
mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1;
mv_pci_mem1_resource.start = mem0_base;
mv_pci_mem1_resource.end = mem0_base + mem0_size - 1;
mv_bus1_controller.mem_offset = mem0_base;
mv_bus1_controller.io_offset = 0;
mv_bus1_controller.pcic.mem_offset = mem0_base;
mv_bus1_controller.pcic.io_offset = 0;
ioport_resource.end = io_base + io_size -mv_io_base - 1;
register_pci_controller(&mv_bus1_controller);
register_pci_controller(&mv_bus1_controller.pcic);
mv_io_size = io_base + io_size - mv_io_base;
}
......
......@@ -29,7 +29,7 @@
struct callvectors* debug_vectors;
extern unsigned long mv64340_base;
extern unsigned long marvell_base;
extern unsigned long cpu_clock;
#ifdef CONFIG_MV64340_ETH
......@@ -180,13 +180,13 @@ void __init prom_init(void)
break;
if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
mv64340_base = simple_strtol(ptr + strlen("gtbase="),
marvell_base = simple_strtol(ptr + strlen("gtbase="),
NULL, 16);
if ((mv64340_base & 0xffffffff00000000) == 0)
mv64340_base |= 0xffffffff00000000;
if ((marvell_base & 0xffffffff00000000) == 0)
marvell_base |= 0xffffffff00000000;
printk("mv64340_base set to 0x%016lx\n", mv64340_base);
printk("marvell_base set to 0x%016lx\n", marvell_base);
}
if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
......@@ -213,7 +213,7 @@ void __init prom_init(void)
while (*env) {
if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
mv64340_base = simple_strtol(*env + strlen("gtbase="),
marvell_base = simple_strtol(*env + strlen("gtbase="),
NULL, 16);
}
if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
......
......@@ -67,7 +67,7 @@
#include <asm/mv64340.h>
#include "ocelot_c_fpga.h"
unsigned long mv64340_base;
unsigned long marvell_base;
extern unsigned long mv64340_sram_base;
unsigned long cpu_clock;
......@@ -117,7 +117,7 @@ void PMON_v2_setup(void)
/* m-sys and internal SRAM */
add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M);
mv64340_base = 0xfffffffff4000000;
marvell_base = 0xfffffffff4000000;
mv64340_sram_base = 0xfffffffffe000000;
#else
/* marvell and extra space */
......@@ -127,7 +127,7 @@ void PMON_v2_setup(void)
/* m-sys and internal SRAM */
add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M);
mv64340_base = 0xf4000000;
marvell_base = 0xf4000000;
mv64340_sram_base = 0xfe000000;
#endif
}
......
......@@ -114,10 +114,10 @@ static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs)
int handled;
/* get the low interrupt cause register */
irq_src = GT_READ(LOW_INTERRUPT_CAUSE_REGISTER);
irq_src = MV_READ(LOW_INTERRUPT_CAUSE_REGISTER);
/* get the mask register for this pin */
irq_src_mask = GT_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
irq_src_mask = MV_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
/* mask off only the interrupts we're interested in */
irq_src = irq_src & irq_src_mask;
......@@ -130,7 +130,7 @@ static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs)
irq_src &= ~0x00000100;
/* Clear any pending cause bits */
GT_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
/* handle the timer call */
do_timer(regs);
......@@ -160,10 +160,10 @@ void gt64240_time_init(void)
static struct irqaction timer;
/* Stop the timer -- we'll use timer #0 */
GT_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
/* Load timer value for 100 Hz */
GT_WRITE(TIMER_COUNTER0, bus_clock / 100);
MV_WRITE(TIMER_COUNTER0, bus_clock / 100);
/*
* Create the IRQ structure entry for the timer. Since we're too early
......@@ -181,16 +181,16 @@ void gt64240_time_init(void)
enable_irq(6);
/* Clear any pending cause bits */
GT_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
/* Enable the interrupt for timer 0 */
GT_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
/* Enable the timer interrupt for GT-64240 pin P0_INT# */
GT_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
MV_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
/* Configure and start the timer */
GT_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
}
void gt64240_irq_init(void)
......
......@@ -26,7 +26,7 @@
struct callvectors* debug_vectors;
extern unsigned long gt64240_base;
extern unsigned long marvell_base;
extern unsigned long bus_clock;
#ifdef CONFIG_GALILLEO_GT64240_ETH
......@@ -69,7 +69,7 @@ void __init prom_init(void)
while (*env) {
if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
gt64240_base = simple_strtol(*env + strlen("gtbase="),
marvell_base = simple_strtol(*env + strlen("gtbase="),
NULL, 16);
}
if (strncmp("busclock", *env, strlen("busclock")) == 0) {
......
......@@ -67,7 +67,7 @@
extern unsigned char prom_mac_addr_base[6];
#endif
unsigned long gt64240_base;
unsigned long marvell_base;
/* These functions are used for rebooting or halting the machine*/
extern void momenco_ocelot_restart(char *command);
......@@ -117,7 +117,7 @@ void PMON_v2_setup(void)
add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000),
0xfc800000, PM_64K);
gt64240_base = 0xf4000000;
marvell_base = 0xf4000000;
}
extern int rm7k_tcache_enabled;
......@@ -133,7 +133,7 @@ static void __init setup_l3cache(unsigned long size)
printk("Enabling L3 cache...");
/* Enable the L3 cache in the GT64120A's CPU Configuration register */
GT_WRITE(0, GT_READ(0) | (1<<14));
MV_WRITE(0, MV_READ(0) | (1<<14));
/* Enable the L3 cache in the CPU */
set_c0_config(1<<12 /* CONF_TE */);
......@@ -239,7 +239,7 @@ static int __init momenco_ocelot_g_setup(void)
}
/* FIXME: Fix up the DiskOnChip mapping */
GT_WRITE(0x468, 0xfef73);
MV_WRITE(0x468, 0xfef73);
return 0;
}
......
......@@ -12,7 +12,7 @@ obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o
obj-$(CONFIG_MIPS_GT64111) += ops-gt64111.o
obj-$(CONFIG_MIPS_GT64120) += ops-gt64120.o
obj-$(CONFIG_MIPS_GT96100) += ops-gt96100.o
obj-$(CONFIG_MIPS_MV64340) += ops-mv64340.o
obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o
obj-$(CONFIG_MIPS_MSC) += ops-msc.o
obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o
......@@ -38,8 +38,7 @@ obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
obj-$(CONFIG_MOMENCO_OCELOT_C) += fixup-ocelot-c.o pci-ocelot-c.o
obj-$(CONFIG_MOMENCO_OCELOT_G) += fixup-ocelot-g.o ops-gt64240.o pci-ocelot-g.o
obj-$(CONFIG_NEC_EAGLE) += fixup-eagle.o ops-vrc4173.o
obj-$(CONFIG_MOMENCO_OCELOT_G) += fixup-ocelot-g.o pci-ocelot-g.o
obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \
pci-yosemite.o
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
......
/*
* arch/mips/vr41xx/nec-eagle/pci_fixup.c
*
* The NEC Eagle/Hawk Board specific PCI fixups.
*
* Author: Yoichi Yuasa <you@mvista.com, or source@mvista.com>
*
* 2001-2002,2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/vr41xx/eagle.h>
#include <asm/vr41xx/vrc4173.h>
/*
* Shortcuts
*/
#define INTA CP_INTA_IRQ
#define INTB CP_INTB_IRQ
#define INTC CP_INTC_IRQ
#define INTD CP_INTD_IRQ
#define PCMCIA1 VRC4173_PCMCIA1_IRQ
#define PCMCIA2 VRC4173_PCMCIA2_IRQ
#define LAN LANINTA_IRQ
#define SLOT PCISLOT_IRQ
static char irq_tab_eagle[][5] __initdata = {
[ 8] = { 0, INTA, INTB, INTC, INTD },
[ 9] = { 0, INTD, INTA, INTB, INTC },
[10] = { 0, INTC, INTD, INTA, INTB },
[12] = { 0, PCMCIA1, 0, 0, 0 },
[13] = { 0, PCMCIA2, 0, 0, 0 },
[28] = { 0, LAN, 0, 0, 0 },
[29] = { 0, SLOT, INTB, INTC, INTD },
};
/*
* This is a multifunction device.
*/
static char irq_func_tab[] __initdata = {
VRC4173_CASCADE_IRQ,
VRC4173_AC97_IRQ,
VRC4173_USB_IRQ
};
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
if (slot == 30)
return irq_func_tab[PCI_FUNC(dev->devfn)];
return irq_tab_eagle[slot][pin];
}
struct pci_fixup pcibios_fixups[] __initdata = {
{ .pass = 0, },
};
/*
* Copyright 2002 Momentum Computer
* Author: Matthew Dharm <mdharm@momenco.com>
* Copyright (C) 2004 Ralf Baechle <ralf@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/gt64240.h>
#define MASTER_ABORT_BIT 0x100
/*
* galileo_pcibios_(read/write)_config_(dword/word/byte) -
*
* reads/write a dword/word/byte register from the configuration space
* of a device.
*
* Note that bus 0 and bus 1 are local, and we assume all other busses are
* bridged from bus 1. This is a safe assumption, since any other
* configuration will require major modifications to the CP7000G
*
* Inputs :
* bus - bus number
* dev - device number
* offset - register offset in the configuration space
* val - value to be written / read
*
* Outputs :
* PCIBIOS_SUCCESSFUL when operation was succesfull
* PCIBIOS_DEVICE_NOT_FOUND when the bus or dev is errorneous
* PCIBIOS_BAD_REGISTER_NUMBER when accessing non aligned
*/
static int gt_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
int size, u32 *val, u32 address_reg, u32 data_reg)
{
uint32_t address;
int dev, busno;
busno = bus->number;
dev = PCI_SLOT(devfn);
/* verify the range */
if (dev == 31)
return PCIBIOS_DEVICE_NOT_FOUND;
address = (busno << 16) | (devfn << 8) | (offset & 0xfc) | 0x80000000;
/* start the configuration cycle */
GT_WRITE(address_reg, address);
switch (size) {
case 1:
GT_READ_8(data_reg + (offset & 0x3), val);
break;
case 2:
GT_READ_16(data_reg + (offset & 0x3), val);
break;
case 4:
*val = GT_READ(data_reg);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int gt_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
int size, u32 val, u32 address_reg, u32 data_reg)
{
unsigned int address;
int dev, busno;
busno = bus->number;
dev = PCI_SLOT(devfn);
/* verify the range */
if (dev == 31)
return PCIBIOS_DEVICE_NOT_FOUND;
address = (busno << 16) | (devfn << 8) | (offset & 0xfc) | 0x80000000;
/* start the configuration cycle */
GT_WRITE(address_reg, address);
switch (size) {
case 1:
GT_WRITE_8(data_reg + (offset & 0x3), val);
break;
case 2:
GT_WRITE_16(data_reg + (offset & 0x3), val);
break;
case 4:
GT_WRITE(data_reg, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
#define BUILD_PCI_OPS(host) \
\
static int gt_bus ## host ## _read_config(struct pci_bus *bus, \
unsigned int devfn, int reg, int size, u32 * val) \
{ \
return gt_read_config(bus, devfn, reg, size, val, \
PCI_ ## host ## CONFIGURATION_ADDRESS, \
PCI_ ## host ## CONFIGURATION_DATA_VIRTUAL_REGISTER); \
} \
\
static int gt_bus ## host ## _write_config(struct pci_bus *bus, \
unsigned int devfn, int reg, int size, u32 val) \
{ \
return gt_write_config(bus, devfn, reg, size, val, \
PCI_ ## host ## CONFIGURATION_ADDRESS, \
PCI_ ## host ## CONFIGURATION_DATA_VIRTUAL_REGISTER); \
} \
\
struct pci_ops gt_bus ## host ## _pci_ops = { \
.read = gt_bus ## host ## _read_config, \
.write = gt_bus ## host ## _write_config \
};
BUILD_PCI_OPS(0)
BUILD_PCI_OPS(1)
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/marvell.h>
static int mv_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 * val)
{
struct mv_pci_controller *mvbc = bus->sysdata;
unsigned long address_reg, data_reg;
u32 address;
address_reg = mvbc->config_addr;
data_reg = mvbc->config_vreg;
/* Accessing device 31 crashes those Marvells. Since years.
Will they ever make sane controllers ... */
if (PCI_SLOT(devfn) == 31)
return PCIBIOS_DEVICE_NOT_FOUND;
address = (bus->number << 16) | (devfn << 8) |
(where & 0xfc) | 0x80000000;
/* start the configuration cycle */
MV_WRITE(address_reg, address);
switch (size) {
case 1:
*val = MV_READ_8(data_reg + (where & 0x3));
break;
case 2:
*val = MV_READ_16(data_reg + (where & 0x3));
break;
case 4:
*val = MV_READ(data_reg);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int mv_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
struct mv_pci_controller *mvbc = bus->sysdata;
unsigned long address_reg, data_reg;
u32 address;
address_reg = mvbc->config_addr;
data_reg = mvbc->config_vreg;
/* Accessing device 31 crashes those Marvells. Since years.
Will they ever make sane controllers ... */
if (PCI_SLOT(devfn) == 31)
return PCIBIOS_DEVICE_NOT_FOUND;
address = (bus->number << 16) | (devfn << 8) |
(where & 0xfc) | 0x80000000;
/* start the configuration cycle */
MV_WRITE(address_reg, address);
switch (size) {
case 1:
MV_WRITE_8(data_reg + (where & 0x3), val);
break;
case 2:
MV_WRITE_16(data_reg + (where & 0x3), val);
break;
case 4:
MV_WRITE(data_reg, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops mv_pci_ops = {
.read = mv_read_config,
.write = mv_write_config
};
/*
* Copyright 2002 Momentum Computer
* Author: Matthew Dharm <mdharm@momenco.com>
*
* Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <asm/mv64340.h>
/*
* galileo_pcibios_(read/write)_config_(dword/word/byte) -
*
* reads/write a dword/word/byte register from the configuration space
* of a device.
*
* Note that bus 0 and bus 1 are local, and we assume all other busses are
* bridged from bus 1. This is a safe assumption, since any other
* configuration will require major modifications to the CP7000G
*
* Inputs :
* bus - bus number
* dev - device number
* offset - register offset in the configuration space
* val - value to be written / read
*
* Outputs :
* PCIBIOS_SUCCESSFUL when operation was succesfull
* PCIBIOS_DEVICE_NOT_FOUND when the bus or dev is errorneous
* PCIBIOS_BAD_REGISTER_NUMBER when accessing non aligned
*/
static int mv64340_read_config(struct pci_bus *bus, unsigned int devfn, int reg,
int size, u32 * val, u32 address_reg, u32 data_reg)
{
u32 address;
/* Accessing device 31 crashes the MV-64340. */
if (PCI_SLOT(devfn) > 5)
return PCIBIOS_DEVICE_NOT_FOUND;
address = (bus->number << 16) | (devfn << 8) |
(reg & 0xfc) | 0x80000000;
/* start the configuration cycle */
MV_WRITE(address_reg, address);
switch (size) {
case 1:
*val = MV_READ_8(data_reg + (reg & 0x3));
break;
case 2:
*val = MV_READ_16(data_reg + (reg & 0x3));
break;
case 4:
*val = MV_READ(data_reg);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int mv64340_write_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 val, u32 address_reg, u32 data_reg)
{
u32 address;
/* Accessing device 31 crashes the MV-64340. */
if (PCI_SLOT(devfn) > 5)
return PCIBIOS_DEVICE_NOT_FOUND;
address = (bus->number << 16) | (devfn << 8) |
(reg & 0xfc) | 0x80000000;
/* start the configuration cycle */
MV_WRITE(address_reg, address);
switch (size) {
case 1:
/* write the data */
MV_WRITE_8(data_reg + (reg & 0x3), val);
break;
case 2:
/* write the data */
MV_WRITE_16(data_reg + (reg & 0x3), val);
break;
case 4:
/* write the data */
MV_WRITE(data_reg, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
#define BUILD_PCI_OPS(host) \
\
static int mv64340_bus ## host ## _read_config(struct pci_bus *bus, \
unsigned int devfn, int reg, int size, u32 * val) \
{ \
return mv64340_read_config(bus, devfn, reg, size, val, \
MV64340_PCI_ ## host ## _CONFIG_ADDR, \
MV64340_PCI_ ## host ## _CONFIG_DATA_VIRTUAL_REG); \
} \
\
static int mv64340_bus ## host ## _write_config(struct pci_bus *bus, \
unsigned int devfn, int reg, int size, u32 val) \
{ \
return mv64340_write_config(bus, devfn, reg, size, val, \
MV64340_PCI_ ## host ## _CONFIG_ADDR, \
MV64340_PCI_ ## host ## _CONFIG_DATA_VIRTUAL_REG); \
} \
\
struct pci_ops mv64340_bus ## host ## _pci_ops = { \
.read = mv64340_bus ## host ## _read_config, \
.write = mv64340_bus ## host ## _write_config \
};
BUILD_PCI_OPS(0)
BUILD_PCI_OPS(1)
/*
* FILE NAME
* arch/mips/vr41xx/nec-eagle/vrc4173.c
*
* BRIEF MODULE DESCRIPTION
* Pre-setup for NEC VRC4173.
*
* Author: Yoichi Yuasa
* yyuasa@mvista.com or source@mvista.com
*
* Copyright 2001,2002 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/vr41xx/eagle.h>
#include <asm/vr41xx/vrc4173.h>
#define PCI_CONFIG_ADDR KSEG1ADDR(0x0f000c18)
#define PCI_CONFIG_DATA KSEG1ADDR(0x0f000c14)
static inline void config_writeb(u8 reg, u8 val)
{
u32 data;
int shift;
writel((1UL << 0x1e) | (reg & 0xfc), PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
shift = (reg & 3) << 3;
data &= ~(0xff << shift);
data |= (((u32) val) << shift);
writel(data, PCI_CONFIG_DATA);
}
static inline u16 config_readw(u8 reg)
{
u32 data;
writel(((1UL << 30) | (reg & 0xfc)), PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
return (u16) (data >> ((reg & 2) << 3));
}
static inline u32 config_readl(u8 reg)
{
writel(((1UL << 30) | (reg & 0xfc)), PCI_CONFIG_ADDR);
return readl(PCI_CONFIG_DATA);
}
static inline void config_writel(u8 reg, u32 val)
{
writel((1UL << 0x1e) | (reg & 0xfc), PCI_CONFIG_ADDR);
writel(val, PCI_CONFIG_DATA);
}
void __init vrc4173_preinit(void)
{
u32 cmdsts, base;
u16 cmu_mask;
if ((config_readw(PCI_VENDOR_ID) == PCI_VENDOR_ID_NEC) &&
(config_readw(PCI_DEVICE_ID) == PCI_DEVICE_ID_NEC_VRC4173)) {
/*
* Initialized NEC VRC4173 Bus Control Unit
*/
cmdsts = config_readl(PCI_COMMAND);
config_writel(PCI_COMMAND,
cmdsts |
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
config_writeb(PCI_LATENCY_TIMER, 0x80);
config_writel(PCI_BASE_ADDRESS_0, VR41XX_PCI_IO_START);
base = config_readl(PCI_BASE_ADDRESS_0);
base &= PCI_BASE_ADDRESS_IO_MASK;
config_writeb(0x40, 0x01);
/* CARDU1 IDSEL = AD12, CARDU2 IDSEL = AD13 */
config_writeb(0x41, 0);
cmu_mask = 0x1000;
outw(cmu_mask, base + 0x040);
cmu_mask |= 0x0800;
outw(cmu_mask, base + 0x040);
outw(0x000f, base + 0x042); /* Soft reset of CMU */
cmu_mask |= 0x05e0;
outw(cmu_mask, base + 0x040);
cmu_mask = inw(base + 0x040); /* dummy read */
outw(0x0000, base + 0x042);
}
}
......@@ -27,12 +27,14 @@ static struct resource mv_pci_mem0_resource = {
.flags = IORESOURCE_MEM
};
extern struct pci_ops mv64340_bus0_pci_ops;
static struct pci_controller mv_bus0_controller = {
.pci_ops = &mv64340_bus0_pci_ops,
static struct mv_pci_controller mv_bus0_controller = {
.pcic = {
.pci_ops = &mv_pci_ops,
.mem_resource = &mv_pci_mem0_resource,
.io_resource = &mv_pci_io_mem0_resource,
},
.config_addr = MV64340_PCI_0_CONFIG_ADDR,
.config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
};
static uint32_t mv_io_base, mv_io_size;
......@@ -51,12 +53,12 @@ static void mv64340_pci0_init(void)
mv_pci_io_mem0_resource.end = io_size - 1;
mv_pci_mem0_resource.start = mem0_base;
mv_pci_mem0_resource.end = mem0_base + mem0_size - 1;
mv_bus0_controller.mem_offset = mem0_base;
mv_bus0_controller.io_offset = 0;
mv_bus0_controller.pcic.mem_offset = mem0_base;
mv_bus0_controller.pcic.io_offset = 0;
ioport_resource.end = io_size - 1;
register_pci_controller(&mv_bus0_controller);
register_pci_controller(&mv_bus0_controller.pcic);
mv_io_base = io_base;
mv_io_size = io_size;
......@@ -72,12 +74,14 @@ static struct resource mv_pci_mem1_resource = {
.flags = IORESOURCE_MEM
};
extern struct pci_ops mv64340_bus1_pci_ops;
static struct pci_controller mv_bus1_controller = {
.pci_ops = &mv64340_bus1_pci_ops,
static struct mv_pci_controller mv_bus1_controller = {
.pcic = {
.pci_ops = &mv_pci_ops,
.mem_resource = &mv_pci_mem1_resource,
.io_resource = &mv_pci_io_mem1_resource,
},
.config_addr = MV64340_PCI_1_CONFIG_ADDR,
.config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
};
static __init void mv64340_pci1_init(void)
......@@ -99,12 +103,12 @@ static __init void mv64340_pci1_init(void)
mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1;
mv_pci_mem1_resource.start = mem0_base;
mv_pci_mem1_resource.end = mem0_base + mem0_size - 1;
mv_bus1_controller.mem_offset = mem0_base;
mv_bus1_controller.io_offset = 0;
mv_bus1_controller.pcic.mem_offset = mem0_base;
mv_bus1_controller.pcic.io_offset = 0;
ioport_resource.end = io_base + io_size -mv_io_base - 1;
register_pci_controller(&mv_bus1_controller);
register_pci_controller(&mv_bus1_controller.pcic);
mv_io_size = io_base + io_size - mv_io_base;
}
......
......@@ -39,12 +39,16 @@ static struct resource gt_pci_io_mem0_resource = {
.flags = IORESOURCE_IO
};
static struct pci_controller gt_bus0_controller = {
.pci_ops = &gt_bus0_pci_ops,
static struct mv_pci_controller gt_bus0_controller = {
.pcic = {
.pci_ops = &mv_pci_ops,
.mem_resource = &gt_pci_mem0_resource,
.mem_offset = 0xc0000000UL,
.io_resource = &gt_pci_io_mem0_resource,
.io_offset = 0x00000000UL
},
.config_addr = PCI_0CONFIGURATION_ADDRESS,
.config_vreg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
};
static struct resource gt_pci_mem1_resource = {
......@@ -61,12 +65,16 @@ static struct resource gt_pci_io_mem1_resource = {
.flags = IORESOURCE_IO
};
static struct pci_controller gt_bus1_controller = {
.pci_ops = &gt_bus1_pci_ops,
static struct mv_pci_controller gt_bus1_controller = {
.pcic = {
.pci_ops = &mv_pci_ops,
.mem_resource = &gt_pci_mem1_resource,
.mem_offset = 0xd0000000UL,
.io_resource = &gt_pci_io_mem1_resource,
.io_offset = 0x10000000UL
},
.config_addr = PCI_1CONFIGURATION_ADDRESS,
.config_vreg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER,
};
static __init int __init ocelot_g_pci_init(void)
......@@ -81,8 +89,8 @@ static __init int __init ocelot_g_pci_init(void)
set_io_port_base(io_v_base);
}
register_pci_controller(&gt_bus0_controller);
register_pci_controller(&gt_bus1_controller);
register_pci_controller(&gt_bus0_controller.pcic);
register_pci_controller(&gt_bus1_controller.pcic);
return 0;
}
......
......@@ -123,7 +123,7 @@
* check the 1250 interrupt registers to figure out what to do
* Need to detect which CPU we're on, now that smp_affinity is supported.
*/
la v0, KSEG1 + A_IMR_CPU0_BASE
PTR_LA v0, KSEG1 + A_IMR_CPU0_BASE
#ifdef CONFIG_SMP
lw t1, TI_CPU($28)
sll t1, IMR_REGISTER_SPACING_SHIFT
......
#
# Makefile for the NEC Eagle/Hawk specific parts of the kernel
#
# Author: Yoichi Yuasa
# yyuasa@mvista.com or source@mvista.com
#
# Copyright 2001,2002 MontaVista Software Inc.
#
obj-y += irq.o setup.o
/*
* irq.c, Interrupt routines for the NEC Eagle/Hawk board.
*
* Copyright (C) 2002 MontaVista Software, Inc.
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
* Copyright (C) 2004 Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* Changes:
* MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
* - New creation, NEC Eagle is supported.
* - Added support for NEC Hawk.
*
* Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
* - Changed from board_irq_init to driver module.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/vr41xx/eagle.h>
MODULE_DESCRIPTION("IRQ module driver for NEC Eagle/Hawk");
MODULE_AUTHOR("Yoichi Yuasa <yyuasa@mvista.com>");
MODULE_LICENSE("GPL");
static void enable_pciint_irq(unsigned int irq)
{
uint8_t val;
val = readb(NEC_EAGLE_PCIINTMSKREG);
val |= (uint8_t)1 << (irq - PCIINT_IRQ_BASE);
writeb(val, NEC_EAGLE_PCIINTMSKREG);
}
static void disable_pciint_irq(unsigned int irq)
{
uint8_t val;
val = readb(NEC_EAGLE_PCIINTMSKREG);
val &= ~((uint8_t)1 << (irq - PCIINT_IRQ_BASE));
writeb(val, NEC_EAGLE_PCIINTMSKREG);
}
static unsigned int startup_pciint_irq(unsigned int irq)
{
enable_pciint_irq(irq);
return 0; /* never anything pending */
}
#define shutdown_pciint_irq disable_pciint_irq
#define ack_pciint_irq disable_pciint_irq
static void end_pciint_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
enable_pciint_irq(irq);
}
static struct hw_interrupt_type pciint_irq_type = {
.typename = "PCIINT",
.startup = startup_pciint_irq,
.shutdown = shutdown_pciint_irq,
.enable = enable_pciint_irq,
.disable = disable_pciint_irq,
.ack = ack_pciint_irq,
.end = end_pciint_irq,
};
static void enable_sdbint_irq(unsigned int irq)
{
uint8_t val;
val = readb(NEC_EAGLE_SDBINTMSK);
val |= (uint8_t)1 << (irq - SDBINT_IRQ_BASE);
writeb(val, NEC_EAGLE_SDBINTMSK);
}
static void disable_sdbint_irq(unsigned int irq)
{
uint8_t val;
val = readb(NEC_EAGLE_SDBINTMSK);
val &= ~((uint8_t)1 << (irq - SDBINT_IRQ_BASE));
writeb(val, NEC_EAGLE_SDBINTMSK);
}
static unsigned int startup_sdbint_irq(unsigned int irq)
{
enable_sdbint_irq(irq);
return 0; /* never anything pending */
}
#define shutdown_sdbint_irq disable_sdbint_irq
#define ack_sdbint_irq disable_sdbint_irq
static void end_sdbint_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
enable_sdbint_irq(irq);
}
static struct hw_interrupt_type sdbint_irq_type = {
.typename = "SDBINT",
.startup = startup_sdbint_irq,
.shutdown = shutdown_sdbint_irq,
.enable = enable_sdbint_irq,
.disable = disable_sdbint_irq,
.ack = ack_sdbint_irq,
.end = end_sdbint_irq,
};
static int eagle_get_irq_number(int irq)
{
uint8_t sdbint, pciint;
int i;
sdbint = readb(NEC_EAGLE_SDBINT);
sdbint &= (NEC_EAGLE_SDBINT_DEG | NEC_EAGLE_SDBINT_ENUM |
NEC_EAGLE_SDBINT_SIO1INT | NEC_EAGLE_SDBINT_SIO2INT |
NEC_EAGLE_SDBINT_PARINT);
pciint = readb(NEC_EAGLE_PCIINTREG);
pciint &= (NEC_EAGLE_PCIINT_CP_INTA | NEC_EAGLE_PCIINT_CP_INTB |
NEC_EAGLE_PCIINT_CP_INTC | NEC_EAGLE_PCIINT_CP_INTD |
NEC_EAGLE_PCIINT_LANINT);
for (i = 1; i < 6; i++)
if (sdbint & (0x01 << i))
return SDBINT_IRQ_BASE + i;
for (i = 0; i < 5; i++)
if (pciint & (0x01 << i))
return PCIINT_IRQ_BASE + i;
return -EINVAL;
}
static int __devinit eagle_irq_init(void)
{
int i, retval;
writeb(0, NEC_EAGLE_SDBINTMSK);
writeb(0, NEC_EAGLE_PCIINTMSKREG);
vr41xx_set_irq_trigger(PCISLOT_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH);
vr41xx_set_irq_level(PCISLOT_PIN, LEVEL_HIGH);
vr41xx_set_irq_trigger(FPGA_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH);
vr41xx_set_irq_level(FPGA_PIN, LEVEL_HIGH);
vr41xx_set_irq_trigger(DCD_PIN, TRIGGER_EDGE, SIGNAL_HOLD);
vr41xx_set_irq_level(DCD_PIN, LEVEL_LOW);
for (i = SDBINT_IRQ_BASE; i <= SDBINT_IRQ_LAST; i++)
irq_desc[i].handler = &sdbint_irq_type;
for (i = PCIINT_IRQ_BASE; i <= PCIINT_IRQ_LAST; i++)
irq_desc[i].handler = &pciint_irq_type;
retval = vr41xx_cascade_irq(FPGA_CASCADE_IRQ, eagle_get_irq_number);
if (retval != 0)
printk(KERN_ERR "eagle: Cannot cascade IRQ %d\n", FPGA_CASCADE_IRQ);
return retval;
}
static void __devexit eagle_irq_exit(void)
{
free_irq(FPGA_CASCADE_IRQ, NULL);
}
module_init(eagle_irq_init);
module_exit(eagle_irq_exit);
/*
* arch/mips/vr41xx/nec-eagle/setup.c
*
* Setup for the NEC Eagle/Hawk board.
*
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
*
* 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/config.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/pci_channel.h>
#include <asm/vr41xx/eagle.h>
#ifdef CONFIG_PCI
extern void vrc4173_preinit(void);
static struct resource vr41xx_pci_io_resource = {
"PCI I/O space",
VR41XX_PCI_IO_START,
VR41XX_PCI_IO_END,
IORESOURCE_IO
};
static struct resource vr41xx_pci_mem_resource = {
"PCI memory space",
VR41XX_PCI_MEM_START,
VR41XX_PCI_MEM_END,
IORESOURCE_MEM
};
extern struct pci_ops vr41xx_pci_ops;
struct pci_controller vr41xx_controller = {
.pci_ops = &vr41xx_pci_ops,
.io_resource = &vr41xx_pci_io_resource,
.mem_resource = &vr41xx_pci_mem_resource,
};
struct vr41xx_pci_address_space vr41xx_pci_mem1 = {
VR41XX_PCI_MEM1_BASE,
VR41XX_PCI_MEM1_MASK,
IO_MEM1_RESOURCE_START
};
struct vr41xx_pci_address_space vr41xx_pci_mem2 = {
VR41XX_PCI_MEM2_BASE,
VR41XX_PCI_MEM2_MASK,
IO_MEM2_RESOURCE_START
};
struct vr41xx_pci_address_space vr41xx_pci_io = {
VR41XX_PCI_IO_BASE,
VR41XX_PCI_IO_MASK,
IO_PORT_RESOURCE_START
};
static struct vr41xx_pci_address_map pci_address_map = {
&vr41xx_pci_mem1,
&vr41xx_pci_mem2,
&vr41xx_pci_io
};
#endif
const char *get_system_type(void)
{
return "NEC SDB-VR4122/VR4131(Eagle/Hawk)";
}
static int nec_eagle_setup(void)
{
set_io_port_base(IO_PORT_BASE);
ioport_resource.start = IO_PORT_RESOURCE_START;
ioport_resource.end = IO_PORT_RESOURCE_END;
#ifdef CONFIG_SERIAL_8250
vr41xx_select_siu_interface(SIU_RS232C, IRDA_NONE);
vr41xx_siu_init();
vr41xx_dsiu_init();
#endif
#ifdef CONFIG_PCI
vr41xx_pciu_init(&pci_address_map);
vrc4173_preinit();
#endif
return 0;
}
early_initcall(nec_eagle_setup);
......@@ -705,6 +705,16 @@ config MPC10X_BRIDGE
depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
default y
config FSL_OCP
bool
depends on MPC10X_BRIDGE
default y
config MPC10X_OPENPIC
bool
depends on POWERPMC250 || LOPEC || SANDPOINT
default y
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
......
......@@ -30,6 +30,7 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -56,6 +57,8 @@ CONFIG_44x=y
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_E500 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_CPU_FREQ is not set
......@@ -68,7 +71,6 @@ CONFIG_EBONY=y
# CONFIG_OCOTEA is not set
CONFIG_440GP=y
CONFIG_440=y
CONFIG_BOOKE=y
CONFIG_IBM_OCP=y
# CONFIG_PM is not set
CONFIG_NOT_COHERENT_CACHE=y
......@@ -106,6 +108,8 @@ CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x01000000
#
......@@ -115,6 +119,7 @@ CONFIG_BOOT_LOAD=0x01000000
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
#
......@@ -141,7 +146,7 @@ CONFIG_BOOT_LOAD=0x01000000
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y
......@@ -247,6 +252,7 @@ CONFIG_NETFILTER=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -272,6 +278,12 @@ CONFIG_NETDEVICES=y
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_IBM_EMAC=y
# CONFIG_IBM_EMAC_ERRMSG is not set
CONFIG_IBM_EMAC_RXB=64
CONFIG_IBM_EMAC_TXB=8
CONFIG_IBM_EMAC_FGAP=8
CONFIG_IBM_EMAC_SKBRES=0
#
# Ethernet (1000 Mbit)
......@@ -310,7 +322,6 @@ CONFIG_NETDEVICES=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -544,6 +555,11 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
......
......@@ -21,18 +21,22 @@ CONFIG_BROKEN_ON_SMP=y
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
......@@ -54,6 +58,8 @@ CONFIG_44x=y
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_E500 is not set
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_CPU_FREQ is not set
......@@ -66,9 +72,7 @@ CONFIG_4xx=y
CONFIG_OCOTEA=y
CONFIG_440GX=y
CONFIG_440A=y
CONFIG_BOOKE=y
CONFIG_IBM_OCP=y
CONFIG_PPC_OCP=y
CONFIG_IBM_EMAC4=y
# CONFIG_PM is not set
CONFIG_NOT_COHERENT_CACHE=y
......@@ -106,6 +110,8 @@ CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x01000000
#
......@@ -115,6 +121,7 @@ CONFIG_BOOT_LOAD=0x01000000
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
#
......@@ -141,7 +148,7 @@ CONFIG_BOOT_LOAD=0x01000000
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
......@@ -163,7 +170,6 @@ CONFIG_BOOT_LOAD=0x01000000
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -212,8 +218,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
......@@ -232,7 +236,9 @@ CONFIG_NETFILTER=y
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
......@@ -248,21 +254,27 @@ CONFIG_NETFILTER=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
......@@ -279,6 +291,12 @@ CONFIG_NET_ETHERNET=y
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_EMAC=y
# CONFIG_IBM_EMAC_ERRMSG is not set
CONFIG_IBM_EMAC_RXB=128
CONFIG_IBM_EMAC_TXB=128
CONFIG_IBM_EMAC_FGAP=8
CONFIG_IBM_EMAC_SKBRES=0
# CONFIG_NET_PCI is not set
#
......@@ -291,7 +309,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
......@@ -299,51 +316,28 @@ CONFIG_NET_ETHERNET=y
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
CONFIG_IBM_EMAC=y
# CONFIG_IBM_EMAC_ERRMSG is not set
CONFIG_IBM_EMAC_RXB=128
CONFIG_IBM_EMAC_TXB=128
CONFIG_IBM_EMAC_FGAP=8
CONFIG_IBM_EMAC_SKBRES=0
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
# Wireless LAN (non-hamradio)
#
# CONFIG_IRDA is not set
# CONFIG_NET_RADIO is not set
#
# Bluetooth support
# Wan interfaces
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
......@@ -515,6 +509,7 @@ CONFIG_LEGACY_PTY_COUNT=256
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
......@@ -555,7 +550,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -573,6 +567,12 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
......@@ -587,7 +587,7 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_BDI_SWITCH=y
CONFIG_DEBUG_INFO=y
# CONFIG_SERIAL_TEXT_DEBUG is not set
CONFIG_OCP=y
CONFIG_PPC_OCP=y
#
# Security options
......
......@@ -177,11 +177,11 @@ skpinv: addi r4,r4,1 /* Increment */
rfi
/* If necessary, invalidate original entry we used */
3: cmpwi r23,62
3: cmpwi r23,63
beq 4f
li r6,0
tlbwe r6,r23,PPC44x_TLB_PAGEID
sync
isync
4:
#ifdef CONFIG_SERIAL_TEXT_DEBUG
......@@ -680,7 +680,7 @@ interrupt_base:
mfspr r4,SPRN_ESR /* Grab the ESR and save it */
stw r4,_ESR(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE(0x700, ProgramCheckException)
EXC_XFER_STD(0x700, ProgramCheckException)
/* Floating Point Unavailable Interrupt */
EXCEPTION(0x2010, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
......
......@@ -451,7 +451,7 @@ label:
mfspr r4,SPRN_ESR /* Grab the ESR and save it */
stw r4,_ESR(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE(0x700, ProgramCheckException)
EXC_XFER_STD(0x700, ProgramCheckException)
EXCEPTION(0x0800, Trap_08, UnknownException, EXC_XFER_EE)
EXCEPTION(0x0900, Trap_09, UnknownException, EXC_XFER_EE)
......
......@@ -192,21 +192,8 @@ lopec_init_IRQ(void)
OpenPIC_InitSenses = lopec_openpic_initsenses;
OpenPIC_NumInitSenses = sizeof(lopec_openpic_initsenses);
/*
* We need to tell openpic_set_sources where things actually are.
* mpc10x_common will setup OpenPIC_Addr at ioremap(EUMB phys base +
* EPIC offset (0x40000)); The EPIC IRQ Register Address Map -
* Interrupt Source Configuration Registers gives these numbers
* as offsets starting at 0x50200, we need to adjust occordinly.
*/
/* Map serial interrupts 0-15 */
openpic_set_sources(0, 16, OpenPIC_Addr + 0x10200);
/* Skip reserved space and map i2c and DMA Ch[01] */
openpic_set_sources(16, 3, OpenPIC_Addr + 0x11020);
/* Skip reserved space and map Message Unit Interrupt (I2O) */
openpic_set_sources(19, 1, OpenPIC_Addr + 0x110C0);
openpic_init(NUM_8259_INTERRUPTS);
mpc10x_set_openpic();
/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
&i8259_irq);
......
......@@ -197,7 +197,7 @@ powerpmc250_init_IRQ(void)
OpenPIC_InitSenses = powerpmc250_openpic_initsenses;
OpenPIC_NumInitSenses = sizeof(powerpmc250_openpic_initsenses);
openpic_init(1, 0, 0, -1);
mpc10x_set_openpic();
}
/*
......
......@@ -433,17 +433,7 @@ sandpoint_init_IRQ(void)
OpenPIC_InitSenses = sandpoint_openpic_initsenses;
OpenPIC_NumInitSenses = sizeof(sandpoint_openpic_initsenses);
/*
* We need to tell openpic_set_sources where things actually are.
* mpc10x_common will setup OpenPIC_Addr at ioremap(EUMB phys base +
* EPIC offset (0x40000)); The EPIC IRQ Register Address Map -
* Interrupt Source Configuration Registers gives these numbers
* as offsets starting at 0x50200, we need to adjust occordinly.
*/
/* Map serial interrupts 0-15 */
openpic_set_sources(0, 16, OpenPIC_Addr + 0x10200);
openpic_init(NUM_8259_INTERRUPTS);
mpc10x_set_openpic();
openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
i8259_irq);
......
......@@ -48,7 +48,7 @@ obj-$(CONFIG_EV64260) += gt64260_common.o gt64260_pic.o \
obj-$(CONFIG_GEMINI) += open_pic.o indirect_pci.o
obj-$(CONFIG_K2) += i8259.o indirect_pci.o todc_time.o \
pci_auto.o
obj-$(CONFIG_LOPEC) += pci_auto.o open_pic.o i8259.o todc_time.o
obj-$(CONFIG_LOPEC) += i8259.o pci_auto.o todc_time.o
obj-$(CONFIG_MCPN765) += todc_time.o indirect_pci.o pci_auto.o \
open_pic.o i8259.o hawk_common.o
obj-$(CONFIG_MENF1) += todc_time.o i8259.o mpc10x_common.o \
......@@ -58,14 +58,14 @@ obj-$(CONFIG_MVME5100) += open_pic.o todc_time.o indirect_pci.o \
obj-$(CONFIG_OCOTEA) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_PAL4) += cpc700_pic.o
obj-$(CONFIG_PCORE) += todc_time.o i8259.o pci_auto.o
obj-$(CONFIG_POWERPMC250) += open_pic.o pci_auto.o
obj-$(CONFIG_POWERPMC250) += pci_auto.o
obj-$(CONFIG_PPLUS) += hawk_common.o open_pic.o i8259.o \
indirect_pci.o todc_time.o pci_auto.o
obj-$(CONFIG_PRPMC750) += open_pic.o indirect_pci.o pci_auto.o \
hawk_common.o
obj-$(CONFIG_HARRIER) += harrier.o
obj-$(CONFIG_PRPMC800) += open_pic.o indirect_pci.o pci_auto.o
obj-$(CONFIG_SANDPOINT) += i8259.o open_pic.o pci_auto.o todc_time.o
obj-$(CONFIG_SANDPOINT) += i8259.o pci_auto.o todc_time.o
obj-$(CONFIG_SBC82xx) += todc_time.o
obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \
todc_time.o
......@@ -79,6 +79,7 @@ obj-$(CONFIG_SERIAL_TEXT_DEBUG) += gen550_dbg.o
endif
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o
obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o
obj-$(CONFIG_40x) += dcr.o
obj-$(CONFIG_BOOKE) += dcr.o
obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o
......
......@@ -30,7 +30,8 @@ void __init ibm440gp_get_clocks(struct ibm44x_clocks* p,
{
u32 cpc0_sys0 = mfdcr(DCRN_CPC0_SYS0);
u32 cpc0_cr0 = mfdcr(DCRN_CPC0_CR0);
u32 opdv, epdv;
u32 opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
u32 epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
if (cpc0_sys0 & 0x2){
/* Bypass system PLL */
......@@ -60,9 +61,6 @@ void __init ibm440gp_get_clocks(struct ibm44x_clocks* p,
p->plb = vco / fwdvb;
}
opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
p->opb = p->plb / opdv;
p->ebc = p->opb / epdv;
......
......@@ -30,7 +30,60 @@
#include <asm/pci-bridge.h>
#include <asm/open_pic.h>
#include <asm/mpc10x.h>
#include <asm/ocp.h>
/* The OCP structure is fixed by code below, before OCP initialises.
paddr depends on where the board places the EUMB.
- fixed in mpc10x_bridge_init().
irq depends on two things:
> does the board use the EPIC at all? (PCORE does not).
> is the EPIC in serial or parallel mode?
- fixed in mpc10x_set_openpic().
*/
#ifdef CONFIG_MPC10X_OPENPIC
#ifdef CONFIG_EPIC_SERIAL_MODE
#define EPIC_IRQ_BASE 16
#else
#define EPIC_IRQ_BASE 5
#endif
#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
#else
#define MPC10X_I2C_IRQ OCP_IRQ_NA
#define MPC10X_DMA0_IRQ OCP_IRQ_NA
#define MPC10X_DMA1_IRQ OCP_IRQ_NA
#endif
struct ocp_def core_ocp[] = {
{ .vendor = OCP_VENDOR_INVALID
}
};
static struct ocp_fs_i2c_data mpc10x_i2c_data = {
.flags = 0
};
static struct ocp_def mpc10x_i2c_ocp = {
.vendor = OCP_VENDOR_MOTOROLA,
.function = OCP_FUNC_IIC,
.index = 0,
.irq = MPC10X_I2C_IRQ,
.additions = &mpc10x_i2c_data
};
static struct ocp_def mpc10x_dma_ocp[2] = {
{ .vendor = OCP_VENDOR_MOTOROLA,
.function = OCP_FUNC_DMA,
.index = 0,
.irq = MPC10X_DMA0_IRQ
},
{ .vendor = OCP_VENDOR_MOTOROLA,
.function = OCP_FUNC_DMA,
.index = 1,
.irq = MPC10X_DMA1_IRQ }
};
/* Set resources to match bridge memory map */
void __init
......@@ -231,11 +284,21 @@ mpc10x_bridge_init(struct pci_controller *hose,
PCI_DEVFN(0,0),
MPC10X_CFG_EUMBBAR,
phys_eumb_base);
/* Map EPIC register part of EUMB into vitual memory */
#ifdef CONFIG_MPC10X_OPENPIC
/* Map EPIC register part of EUMB into vitual memory - PCORE
uses an i8259 instead of EPIC. */
OpenPIC_Addr =
ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
MPC10X_EUMB_EPIC_SIZE);
#endif
mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET;
ocp_add_one_device(&mpc10x_i2c_ocp);
mpc10x_dma_ocp[0].paddr = phys_eumb_base +
MPC10X_EUMB_DMA_OFFSET + 0x100;
ocp_add_one_device(&mpc10x_dma_ocp[0]);
mpc10x_dma_ocp[1].paddr = phys_eumb_base +
MPC10X_EUMB_DMA_OFFSET + 0x200;
ocp_add_one_device(&mpc10x_dma_ocp[1]);
}
#ifdef CONFIG_MPC10X_STORE_GATHERING
......@@ -397,3 +460,17 @@ mpc10x_disable_store_gathering(struct pci_controller *hose)
return 0;
}
#ifdef CONFIG_MPC10X_OPENPIC
void __init mpc10x_set_openpic(void)
{
/* Map external IRQs */
openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
/* Skip reserved space and map i2c and DMA Ch[01] */
openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
/* Skip reserved space and map Message Unit Interrupt (I2O) */
openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
openpic_init(NUM_8259_INTERRUPTS);
}
#endif
......@@ -234,6 +234,9 @@ ppc4xx_uic_disable_and_ack(unsigned int irq)
case 1:
mtdcr(DCRN_UIC_ER(UIC1), ppc_cached_irq_mask[word]);
mtdcr(DCRN_UIC_SR(UIC1), (1 << (31 - bit)));
#if (NR_UICS == 2)
mtdcr(DCRN_UIC_SR(UIC0), (1 << (31 - UIC0_UIC1NC)));
#endif
#if (NR_UICS > 2)
mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
#endif
......@@ -285,6 +288,9 @@ ppc4xx_uic_end(unsigned int irq)
break;
case 1:
mtdcr(DCRN_UIC_SR(UIC1), 1 << (31 - bit));
#if (NR_UICS == 2)
mtdcr(DCRN_UIC_SR(UIC0), (1 << (31 - UIC0_UIC1NC)));
#endif
#if (NR_UICS > 2)
mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
#endif
......@@ -423,7 +429,7 @@ ppc4xx_extpic_init(void)
bit, sense);
#endif
ppc_cached_sense_mask[word] |=
(sense & IRQ_SENSE_MASK) << (31 - bit);
(~sense & IRQ_SENSE_MASK) << (31 - bit);
ppc_cached_pol_mask[word] |=
((sense & IRQ_POLARITY_MASK) >> 1) << (31 - bit);
switch (word) {
......
......@@ -161,7 +161,7 @@ unsigned ItLpQueue_process( struct ItLpQueue * lpQueue, struct pt_regs *regs )
mb();
clear_inUse( lpQueue );
get_paca()->lpEvent_count += numIntsProcessed;
get_paca()->lpevent_count += numIntsProcessed;
return numIntsProcessed;
}
......@@ -79,33 +79,29 @@ int main(void)
/* paca */
DEFINE(PACA_SIZE, sizeof(struct paca_struct));
DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, xPacaIndex));
DEFINE(PACAPROCSTART, offsetof(struct paca_struct, xProcStart));
DEFINE(PACAKSAVE, offsetof(struct paca_struct, xKsave));
DEFINE(PACACURRENT, offsetof(struct paca_struct, xCurrent));
DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, xSavedMsr));
DEFINE(PACASTABREAL, offsetof(struct paca_struct, xStab_data.real));
DEFINE(PACASTABVIRT, offsetof(struct paca_struct, xStab_data.virt));
DEFINE(PACASTABRR, offsetof(struct paca_struct, xStab_data.next_round_robin));
DEFINE(PACAR1, offsetof(struct paca_struct, xR1));
DEFINE(PACALPQUEUE, offsetof(struct paca_struct, lpQueuePtr));
DEFINE(PACATOC, offsetof(struct paca_struct, xTOC));
DEFINE(PACAEXCSP, offsetof(struct paca_struct, exception_sp));
DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, xProcEnabled));
DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index));
DEFINE(PACAPROCSTART, offsetof(struct paca_struct, cpu_start));
DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack));
DEFINE(PACACURRENT, offsetof(struct paca_struct, __current));
DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr));
DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_next_rr));
DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, proc_enabled));
DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr));
DEFINE(PACAPROFENABLED, offsetof(struct paca_struct, prof_enabled));
DEFINE(PACAPROFLEN, offsetof(struct paca_struct, prof_len));
DEFINE(PACAPROFSHIFT, offsetof(struct paca_struct, prof_shift));
DEFINE(PACAPROFBUFFER, offsetof(struct paca_struct, prof_buffer));
DEFINE(PACAPROFSTEXT, offsetof(struct paca_struct, prof_stext));
DEFINE(PACALPPACA, offsetof(struct paca_struct, xLpPaca));
DEFINE(LPPACA, offsetof(struct paca_struct, xLpPaca));
DEFINE(PACAREGSAV, offsetof(struct paca_struct, xRegSav));
DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb));
DEFINE(PACA_EXDSI, offsetof(struct paca_struct, exdsi));
DEFINE(PACAGUARD, offsetof(struct paca_struct, guard));
DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
DEFINE(PACALPPACA, offsetof(struct paca_struct, lppaca));
DEFINE(LPPACASRR0, offsetof(struct ItLpPaca, xSavedSrr0));
DEFINE(LPPACASRR1, offsetof(struct ItLpPaca, xSavedSrr1));
DEFINE(LPPACAANYINT, offsetof(struct ItLpPaca, xIntDword.xAnyInt));
......
......@@ -189,7 +189,7 @@ chrp_init2(void)
*/
void __init fwnmi_init(void)
{
long ret;
int ret;
int ibm_nmi_register = rtas_token("ibm,nmi-register");
if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE)
return;
......
......@@ -31,6 +31,7 @@
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pgtable.h>
#include <asm/rtas.h>
#include "pci.h"
#undef DEBUG
......@@ -365,7 +366,7 @@ unsigned long eeh_check_failure(void *token, unsigned long val)
unsigned long addr;
struct pci_dev *dev;
struct device_node *dn;
unsigned long ret;
int ret;
int rets[2];
static spinlock_t lock = SPIN_LOCK_UNLOCKED;
/* dont want this on the stack */
......@@ -419,7 +420,7 @@ unsigned long eeh_check_failure(void *token, unsigned long val)
BUID_LO(dn->phb->buid));
if (ret == 0 && rets[1] == 1 && rets[0] >= 2) {
unsigned long slot_err_ret;
int slot_err_ret;
spin_lock_irqsave(&lock, flags);
memset(slot_err_buf, 0, RTAS_ERROR_LOG_MAX);
......@@ -470,7 +471,7 @@ struct eeh_early_enable_info {
static void *early_enable_eeh(struct device_node *dn, void *data)
{
struct eeh_early_enable_info *info = data;
long ret;
int ret;
char *status = get_property(dn, "status", 0);
u32 *class_code = (u32 *)get_property(dn, "class-code", 0);
u32 *vendor_id = (u32 *)get_property(dn, "vendor-id", 0);
......
This diff is collapsed.
......@@ -68,7 +68,7 @@ static int proc_lpevents_show(struct seq_file *m, void *v)
seq_printf(m, "\n events processed by processor:\n");
for_each_online_cpu(i)
seq_printf(m, " CPU%02d %10u\n", i, paca[i].lpEvent_count);
seq_printf(m, " CPU%02d %10u\n", i, paca[i].lpevent_count);
return 0;
}
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment