Commit fb9c90ba authored by Andrew Morton's avatar Andrew Morton Committed by Linus Torvalds

[PATCH] MIPS Update

From: Ralf Baechle <ralf@linux-mips.org>

MIPS update:

 - Further conversion of MIPS kernel configuration to reverse dependencies.
 - Support for the PMC-Sierra Yosemite evaluation board.
 - Merge arch/mips/mm-32 and arch/mips/mm-32 into arch/mips/mm.
 - Partial support for the R8000 now that I finally have clearance for the
   documentation previously covered by NDA.
 - Make distclean fixes.
 - Regenerate default configuration files against latest Kconfig files.
 - Fix handling of data bus errors in modules.
 - Make R4000 bug probing more bullet proof.
 - Rewrite semaphore code folloing the PPC implementation to no longer
   manipulate 2 32-bit quantities atomically using 64-bit instructions.
   Occasionally this did cause problems due to struct semaphore not having
   sufficient alignment.
 - Make sys_pipe() code bullet proof against gcc 3.5 over-optimization.
 - Fix possibly exploitable bug in IRIX compatibility statvfs(2).
 - Make sched_clock() an outline function.
 - Support for the MIPS 24K and 25K processors.
 - Make functions static that aren't needed anywhere else.
 - Factor out some more generic MIPS SMP code.
 - Factor out common part of the GT-64240 code.
 - Ocelot C now uses the generic MV-64340 interrupt handler code.
 - Factor out common board support code
 - More cleanup and bug fixes for the NEC VR41xx code.
 - Start cleanup of hazard handling as required for MIPS32/64 V2 processors.
 - Enforce minimal kmalloc alignment of 8 byte so 64-bit registers can be
   stored into fields without exceptions.
 - Speeling and warning fixes.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent d07cdd16
......@@ -96,11 +96,13 @@ config NEC_EAGLE
select DMA_NONCOHERENT
select IRQ_CPU
depends on MACH_VR41XX
select HW_HAS_PCI
config TANBAC_TB0226
bool "Support for TANBAC TB0226 (Mbase)"
depends on MACH_VR41XX
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
help
The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC.
......@@ -110,6 +112,7 @@ config TANBAC_TB0229
bool "Support for TANBAC TB0229 (VR4131DIMM)"
depends on MACH_VR41XX
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
help
The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC.
......@@ -118,6 +121,7 @@ config TANBAC_TB0229
config VICTOR_MPC30X
bool "Support for Victor MP-C303/304"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
depends on MACH_VR41XX
......@@ -125,17 +129,22 @@ config ZAO_CAPCELLA
bool "Support for ZAO Networks Capcella"
depends on MACH_VR41XX
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
config PCI_VR41XX
bool "Add PCI control unit support of NEC VR4100 series"
depends on MACH_VR41XX && PCI
config VRC4171
tristate "add NEC VRC4171 companion chip support"
tristate "Add NEC VRC4171 companion chip support"
depends on MACH_VR41XX && ISA
---help---
The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.
config VRC4173
tristate "add NEC VRC4173 companion chip support"
depends on MACH_VR41XX && PCI
tristate "Add NEC VRC4173 companion chip support"
depends on MACH_VR41XX && PCI_VR41XX
---help---
The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
......@@ -143,11 +152,13 @@ config TOSHIBA_JMR3927
bool "Support for Toshiba JMR-TX3927 board"
depends on MIPS32
select DMA_NONCOHERENT
select HW_HAS_PCI
config MIPS_COBALT
bool "Support for Cobalt Server (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
config MACH_DECSTATION
......@@ -174,6 +185,7 @@ config MIPS_EV64120
bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
help
This is an evaluation board based on the Galileo GT-64120
single-chip system controller that contains a MIPS R5000 compatible
......@@ -189,6 +201,7 @@ config MIPS_EV96100
bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select MIPS_GT96100
select RM7000_CPU_SCACHE
......@@ -201,6 +214,7 @@ config MIPS_EV96100
config MIPS_IVR
bool "Support for Globespan IVR board"
select DMA_NONCOHERENT
select HW_HAS_PCI
help
This is an evaluation board built by Globespan to showcase thir
iVR (Internet Video Recorder) design. It utilizes a QED RM5231
......@@ -211,6 +225,7 @@ config MIPS_IVR
config LASAT
bool "Support for LASAT Networks platforms"
select DMA_NONCOHERENT
select HW_HAS_PCI
select R5000_CPU_SCACHE
config PICVUE
......@@ -233,11 +248,13 @@ config HP_LASERJET
bool "Support for Hewlett Packard LaserJet board"
depends on BROKEN
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
config MIPS_ITE8172
bool "Support for ITE 8172G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
help
Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
with ATX form factor that utilizes a MIPS R5000 to work with its
......@@ -257,6 +274,7 @@ config IT8172_REVC
config MIPS_ATLAS
bool "Support for MIPS Atlas board"
select DMA_NONCOHERENT
select HW_HAS_PCI
help
This enables support for the QED R5231-based MIPS Atlas evaluation
board.
......@@ -265,6 +283,7 @@ config MIPS_MALTA
bool "Support for MIPS Malta board"
select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
select HW_HAS_PCI
help
This enables support for the VR5000-based MIPS Malta evaluation
board.
......@@ -278,6 +297,7 @@ config MIPS_SEAD
config MOMENCO_OCELOT
bool "Support for Momentum Ocelot board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
select RM7000_CPU_SCACHE
......@@ -288,6 +308,7 @@ config MOMENCO_OCELOT
config MOMENCO_OCELOT_G
bool "Support for Momentum Ocelot-G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
select RM7000_CPU_SCACHE
......@@ -298,6 +319,7 @@ config MOMENCO_OCELOT_G
config MOMENCO_OCELOT_C
bool "Support for Momentum Ocelot-C board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select RM7000_CPU_SCACHE
help
......@@ -307,6 +329,7 @@ config MOMENCO_OCELOT_C
config MOMENCO_JAGUAR_ATX
bool "Support for Momentum Jaguar board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
select LIMITED_DMA
......@@ -324,7 +347,10 @@ config JAGUAR_DMALOW
config PMC_YOSEMITE
bool "Support for PMC-Sierra Yosemite eval board"
select DMA_NONCOHERENT
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
select IRQ_CPU_RM7K
help
Yosemite is an evaluation board for the RM9000x2 processor
manufactured by PMC-Sierra
......@@ -338,6 +364,7 @@ config DDB5074
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HAVE_STD_PC_SERIAL_PORT
select HW_HAS_PCI
select IRQ_CPU
select ISA
help
......@@ -348,6 +375,7 @@ config DDB5476
bool "Support for NEC DDB Vrc-5476"
select DMA_NONCOHERENT
select HAVE_STD_PC_SERIAL_PORT
select HW_HAS_PCI
select IRQ_CPU
select ISA
help
......@@ -361,6 +389,7 @@ config DDB5476
config DDB5477
bool "Support for NEC DDB Vrc-5477"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
help
This enables support for the R5432-based NEC DDB Vrc-5477,
......@@ -393,6 +422,7 @@ config SGI_IP27
bool "Support for SGI IP27 (Origin200/2000)"
depends on MIPS64
select DMA_IP27
select HW_HAS_PCI
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
......@@ -457,6 +487,7 @@ config SGI_IP32
bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
select R5000_CPU_SCACHE
select RM7000_CPU_SCACHE
help
......@@ -499,26 +530,31 @@ config MIPS_PB1000
bool "PB1000 board"
depends on SOC_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
config MIPS_PB1100
bool "PB1100 board"
depends on SOC_AU1100
select DMA_NONCOHERENT
select HW_HAS_PCI
config MIPS_PB1500
bool "PB1500 board"
depends on SOC_AU1500
select DMA_NONCOHERENT
select HW_HAS_PCI
config MIPS_PB1550
bool "PB1550 board"
depends on SOC_AU1550
select DMA_NONCOHERENT
select HW_HAS_PCI
config MIPS_DB1000
bool "DB1000 board"
depends on SOC_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
config MIPS_DB1100
bool "DB1100 board"
......@@ -529,10 +565,12 @@ config MIPS_DB1500
bool "DB1500 board"
depends on SOC_AU1500
select DMA_NONCOHERENT
select HW_HAS_PCI
config MIPS_DB1550
bool "DB1550 board"
depends on SOC_AU1550
select HW_HAS_PCI
config MIPS_BOSPORUS
bool "Bosporus board"
......@@ -642,6 +680,7 @@ endchoice
config SIBYTE_SB1250
bool
select HW_HAS_PCI
config SIBYTE_BCM1120
bool
......@@ -649,10 +688,12 @@ config SIBYTE_BCM1120
config SIBYTE_BCM1125
bool
select HW_HAS_PCI
select SIBYTE_BCM112X
config SIBYTE_BCM1125H
bool
select HW_HAS_PCI
select SIBYTE_BCM112X
config SIBYTE_BCM112X
......@@ -699,11 +740,6 @@ endchoice
config CPU_SB1_PASS_2
bool
config SIBYTE_HAS_PCI
bool
depends on SIBYTE_SB1250 || SIBYTE_BCM1125 || SIBYTE_BCM1125H
default y
config SIBYTE_HAS_LDT
bool
depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
......@@ -770,6 +806,7 @@ config SNI_RM200_PCI
bool "Support for SNI RM200 PCI"
select DMA_NONCOHERENT
select HAVE_STD_PC_SERIAL_PORT
select HW_HAS_PCI
select ISA
help
The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
......@@ -781,6 +818,7 @@ config TOSHIBA_RBTX4927
bool "Support for Toshiba TBTX49[23]7 board"
depends on MIPS32
select DMA_NONCOHERENT
select HW_HAS_PCI
select ISA
config RWSEM_GENERIC_SPINLOCK
......@@ -860,11 +898,6 @@ config IRQ_CPU
config IRQ_CPU_RM7K
bool
config DUMMY_KEYB
bool
depends on ZAO_CAPCELLA || VICTOR_MPC30X || SIBYTE_SB1xxx_SOC || NEC_EAGLE || NEC_OSPREY || DDB5477 || CASIO_E55 || TANBAC_TB0226 || TANBAC_TB0229
default y
config DDB5XXX_COMMON
bool
depends on DDB5074 || DDB5476 || DDB5477
......@@ -1164,6 +1197,16 @@ config PAGE_SIZE_4KB
4kB page size will minimize memory consumption and is therefore
recommended for low memory systems.
config PAGE_SIZE_8KB
bool "8kB"
depends on EXPERIMENTAL && CPU_R8000
help
Using 8kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available
only on the R8000 processor. Not that at the time of this writing
this option is still high experimental; there are also issues with
compatibility of user applications.
config PAGE_SIZE_16KB
bool "16kB"
depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
......@@ -1377,9 +1420,12 @@ endmenu
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_PCI
bool
config PCI
bool "Support for PCI controller"
depends on MIPS_DB1000 || DDB5074 || DDB5476 || DDB5477 || HP_LASERJET || LASAT || MIPS_IVR || MIPS_ATLAS || MIPS_COBALT || MIPS_EV64120 || MIPS_EV96100 || MIPS_ITE8172 || MIPS_MALTA || MOMENCO_OCELOT || MOMENCO_OCELOT_C || MOMENCO_OCELOT_G || MOMENCO_JAGUAR_ATX || MIPS_PB1000 || MIPS_PB1100 || SOC_AU1500 || SOC_AU1550 || NEC_EAGLE || SGI_IP27 || SGI_IP32 || SIBYTE_HAS_PCI || SNI_RM200_PCI || TANBAC_TB0226 || TANBAC_TB0229 || TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 || VICTOR_MPC30X || ZAO_CAPCELLA
depends on HW_HAS_PCI
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
......@@ -1559,7 +1605,7 @@ config DEBUG_STACK_USAGE
config DEBUG_SLAB
bool "Debug memory allocations"
depends on DEBUG_KERNEL && !CPU_HAS_LLDSCD
depends on DEBUG_KERNEL
help
Say Y here to have the kernel do limited verification on memory
allocation as well as poisoning memory on free to catch use of freed
......
......@@ -405,6 +405,13 @@ load-$(CONFIG_MOMENCO_OCELOT_G) += 0x80100000
core-$(CONFIG_MOMENCO_OCELOT_C) += arch/mips/momentum/ocelot_c/
load-$(CONFIG_MOMENCO_OCELOT_C) += 0x80100000
#
# PMC-Sierra Yosemite
#
core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/
cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite
load-$(CONFIG_PMC_YOSEMITE) += 0x80100000
#
# Momentum Jaguar ATX
#
......@@ -659,8 +666,6 @@ libs-$(CONFIG_MIPS32) += arch/mips/lib-32/
libs-$(CONFIG_MIPS64) += arch/mips/lib-64/
core-y += arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
core-$(CONFIG_MIPS32) += arch/mips/mm-32/
core-$(CONFIG_MIPS64) += arch/mips/mm-64/
ifdef CONFIG_BAGET_MIPS
......
......@@ -39,7 +39,7 @@ $(obj)/addinitrd: $(obj)/addinitrd.c
archhelp:
@echo '* vmlinux.ecoff - ECOFF boot image'
CLEAN_FILES += addinitrd \
clean-files += addinitrd \
elf2ecoff \
vmlinux.ecoff \
vmlinux.srec \
......
......@@ -107,6 +107,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -121,6 +122,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -197,7 +199,6 @@ CONFIG_BLK_DEV_SD=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
......@@ -216,11 +217,11 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
......@@ -229,6 +230,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
......@@ -395,7 +397,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -616,7 +617,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -651,3 +651,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -105,6 +105,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -496,6 +497,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -567,7 +571,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -652,11 +655,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -59,7 +59,8 @@ CONFIG_MACH_VR41XX=y
# CONFIG_TANBAC_TB0229 is not set
# CONFIG_VICTOR_MPC30X is not set
CONFIG_ZAO_CAPCELLA=y
# CONFIG_VRC4173 is not set
CONFIG_PCI_VR41XX=y
CONFIG_VRC4173=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
......@@ -91,7 +92,6 @@ CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DUMMY_KEYB=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
......@@ -116,6 +116,7 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -126,6 +127,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -185,7 +187,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
......@@ -197,6 +198,7 @@ CONFIG_IDE_TASKFILE_IO=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -214,7 +216,6 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -357,7 +358,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -591,7 +591,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -626,3 +625,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -104,6 +104,7 @@ CONFIG_CPU_NEVADA=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -116,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -176,7 +178,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
......@@ -188,6 +189,7 @@ CONFIG_IDE_TASKFILE_IO=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -205,7 +207,6 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -344,7 +345,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -567,7 +567,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -602,3 +601,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -122,6 +122,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -136,6 +137,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
CONFIG_MMU=y
......@@ -522,6 +524,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -593,7 +598,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -678,11 +682,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -122,6 +122,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -518,6 +519,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -589,7 +593,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -674,11 +677,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -122,6 +122,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -136,6 +137,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
CONFIG_MMU=y
......@@ -259,7 +261,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
......@@ -271,6 +272,7 @@ CONFIG_BLK_DEV_IDECS=m
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -592,6 +594,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -665,7 +670,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -750,11 +754,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -105,6 +105,7 @@ CONFIG_CPU_R5432=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -117,6 +118,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -179,7 +181,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
......@@ -191,6 +192,7 @@ CONFIG_IDE_TASKFILE_IO=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
......@@ -214,7 +216,6 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -363,7 +364,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -487,6 +487,7 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
......@@ -606,7 +607,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -641,3 +641,4 @@ CONFIG_CMDLINE="ip=any"
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -80,7 +80,6 @@ CONFIG_DMA_NONCOHERENT=y
CONFIG_I8259=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DUMMY_KEYB=y
CONFIG_DDB5XXX_COMMON=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
......@@ -106,6 +105,7 @@ CONFIG_CPU_R5432=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -118,6 +118,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -184,7 +185,6 @@ CONFIG_TRAD_SIGNALS=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -345,7 +345,6 @@ CONFIG_PCNET32=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -567,7 +566,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -602,3 +600,4 @@ CONFIG_CMDLINE="ip=any"
# Library routines
#
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
......@@ -109,6 +109,7 @@ CONFIG_CPU_R3000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -184,7 +185,6 @@ CONFIG_BLK_DEV_SD=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
......@@ -537,7 +537,6 @@ CONFIG_RAMFS=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -587,3 +586,4 @@ CONFIG_CMDLINE=""
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
......@@ -91,7 +91,6 @@ CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DUMMY_KEYB=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
......@@ -116,6 +115,7 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -180,7 +180,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
......@@ -191,6 +190,7 @@ CONFIG_IDE_TASKFILE_IO=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
......@@ -570,7 +570,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -605,3 +604,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -59,6 +59,7 @@ CONFIG_NEC_EAGLE=y
# CONFIG_TANBAC_TB0229 is not set
# CONFIG_VICTOR_MPC30X is not set
# CONFIG_ZAO_CAPCELLA is not set
CONFIG_PCI_VR41XX=y
CONFIG_VRC4173=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_MIPS_COBALT is not set
......@@ -91,7 +92,6 @@ CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DUMMY_KEYB=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
......@@ -116,6 +116,7 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -126,6 +127,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -261,7 +263,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
......@@ -274,6 +275,7 @@ CONFIG_IDE_TASKFILE_IO=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -291,7 +293,6 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -447,7 +448,6 @@ CONFIG_PCMCIA_PCNET=m
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -692,7 +692,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -739,11 +738,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -111,6 +111,7 @@ CONFIG_CPU_R5000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_64BIT_PHYS_ADDR is not set
......@@ -124,6 +125,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -191,7 +193,6 @@ CONFIG_TRAD_SIGNALS=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -339,7 +340,6 @@ CONFIG_PPP_ASYNC=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -559,7 +559,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -594,3 +593,4 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/d
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -110,6 +110,7 @@ CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
......@@ -126,6 +127,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
CONFIG_MMU=y
......@@ -514,7 +516,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -549,3 +550,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -114,6 +114,7 @@ CONFIG_CPU_R5000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
......@@ -196,7 +197,6 @@ CONFIG_BLK_DEV_SR=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
......@@ -750,7 +750,6 @@ CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -850,11 +849,13 @@ CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -113,6 +113,7 @@ CONFIG_CPU_R10000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -128,6 +129,7 @@ CONFIG_NR_CPUS=64
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -203,7 +205,6 @@ CONFIG_CHR_DEV_ST=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
......@@ -226,7 +227,6 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
......@@ -235,6 +235,7 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_ISP=y
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
......@@ -267,6 +268,7 @@ CONFIG_SCSI_QLA2XXX=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
......@@ -638,7 +640,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -700,11 +701,13 @@ CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -102,6 +102,7 @@ CONFIG_CPU_R5000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
......@@ -116,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -193,7 +195,6 @@ CONFIG_CHR_DEV_SG=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
......@@ -222,7 +223,6 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
......@@ -231,6 +231,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
......@@ -263,6 +264,7 @@ CONFIG_SCSI_QLA2XXX=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
......@@ -617,7 +619,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -663,3 +664,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -110,6 +110,7 @@ CONFIG_CPU_NEVADA=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -122,6 +123,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
CONFIG_MMU=y
......@@ -231,7 +233,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
......@@ -242,6 +243,7 @@ CONFIG_IDE_TASKFILE_IO=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -615,7 +617,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -650,3 +651,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -108,6 +108,7 @@ CONFIG_CPU_NEVADA=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -120,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -179,7 +181,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
......@@ -191,6 +192,7 @@ CONFIG_IDE_TASKFILE_IO=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -208,7 +210,6 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -350,7 +351,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -571,7 +571,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -606,3 +605,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -100,6 +100,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_CPU_RM9000=y
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
......@@ -118,6 +119,7 @@ CONFIG_HIGHMEM=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -184,7 +186,6 @@ CONFIG_TRAD_SIGNALS=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -538,3 +539,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -104,6 +104,7 @@ CONFIG_CPU_TX39XX=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -115,6 +116,7 @@ CONFIG_RTC_DS1742=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -182,7 +184,6 @@ CONFIG_TRAD_SIGNALS=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -324,7 +325,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -462,6 +462,7 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
......@@ -578,7 +579,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -613,3 +613,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -112,6 +112,7 @@ CONFIG_CPU_R5000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
......@@ -127,6 +128,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_NAMES is not set
......@@ -242,7 +244,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
......@@ -283,6 +284,7 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
......@@ -301,7 +303,6 @@ CONFIG_IDEDMA_AUTO=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -438,7 +439,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -665,7 +665,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -700,3 +699,4 @@ CONFIG_CMDLINE=""
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
......@@ -115,6 +115,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -129,6 +130,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -197,7 +199,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -357,7 +358,6 @@ CONFIG_PCNET32=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -580,7 +580,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -615,3 +614,4 @@ CONFIG_CMDLINE=""
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
......@@ -105,6 +105,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -496,6 +497,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -567,7 +571,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -652,11 +655,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -59,6 +59,7 @@ CONFIG_MACH_VR41XX=y
# CONFIG_TANBAC_TB0229 is not set
CONFIG_VICTOR_MPC30X=y
# CONFIG_ZAO_CAPCELLA is not set
CONFIG_PCI_VR41XX=y
CONFIG_VRC4173=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_MIPS_COBALT is not set
......@@ -91,7 +92,6 @@ CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DUMMY_KEYB=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
......@@ -116,6 +116,7 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -126,6 +127,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -192,7 +194,6 @@ CONFIG_TRAD_SIGNALS=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -335,7 +336,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -555,7 +555,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -602,11 +601,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -105,6 +105,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -496,6 +497,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -567,7 +571,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -652,11 +655,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -100,6 +100,7 @@ CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
......@@ -114,7 +115,10 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
# CONFIG_PCI is not set
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
......@@ -154,8 +158,13 @@ CONFIG_BINFMT_ELF32=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
#
......@@ -185,6 +194,7 @@ CONFIG_BINFMT_ELF32=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
......@@ -257,27 +267,51 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_MV64340_ETH=y
CONFIG_MV64340_ETH_0=y
# CONFIG_MV64340_ETH_1 is not set
# CONFIG_MV64340_ETH_2 is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_MV64340_ETH is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
......@@ -288,6 +322,8 @@ CONFIG_MV64340_ETH_0=y
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
......@@ -329,6 +365,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
......@@ -426,6 +463,7 @@ CONFIG_DUMMY_CONSOLE=y
#
# USB support
#
# CONFIG_USB is not set
#
# USB Gadget Support
......@@ -509,7 +547,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -544,3 +581,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -108,6 +108,7 @@ CONFIG_CPU_RM7000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
......@@ -124,6 +125,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
CONFIG_MMU=y
......@@ -513,7 +515,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -548,3 +549,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
This diff is collapsed.
......@@ -83,7 +83,6 @@ CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DUMMY_KEYB=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
CONFIG_VR4181=y
......@@ -109,6 +108,7 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -507,7 +507,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -542,3 +541,4 @@ CONFIG_CMDLINE="ip=bootp ether=46,0x03fe0300,eth0"
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
......@@ -105,6 +105,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -496,6 +497,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -567,7 +571,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -652,11 +655,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -105,6 +105,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -496,6 +497,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -567,7 +571,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -652,11 +655,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -123,6 +123,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -137,6 +138,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -213,7 +215,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
......@@ -254,6 +255,7 @@ CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
......@@ -272,7 +274,6 @@ CONFIG_BLK_DEV_IDEDMA=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -452,7 +453,6 @@ CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -611,6 +611,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -682,7 +685,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -767,11 +769,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -122,6 +122,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -136,6 +137,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -212,7 +214,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
......@@ -253,6 +254,7 @@ CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
......@@ -271,7 +273,6 @@ CONFIG_BLK_DEV_IDEDMA=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -451,7 +452,6 @@ CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -610,6 +610,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -681,7 +684,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -766,11 +768,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -116,6 +116,7 @@ CONFIG_CPU_R4X00=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_64BIT_PHYS_ADDR is not set
......@@ -129,6 +130,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_NAMES is not set
......@@ -246,7 +248,6 @@ CONFIG_BLK_DEV_SR_VENDOR=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
......@@ -268,12 +269,12 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
......@@ -294,6 +295,7 @@ CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
......@@ -695,7 +697,6 @@ CONFIG_PLIP=m
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -908,6 +909,7 @@ CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_MTOUCH is not set
CONFIG_USB_EGALAX=m
CONFIG_USB_XPAD=m
# CONFIG_USB_ATI_REMOTE is not set
......@@ -1016,6 +1018,7 @@ CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_TEST=m
#
......@@ -1051,10 +1054,14 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
......@@ -1140,6 +1147,7 @@ CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
......@@ -1151,7 +1159,6 @@ CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_CODA_FS_OLD_API=y
CONFIG_INTERMEZZO_FS=m
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
......@@ -1252,11 +1259,13 @@ CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
......@@ -93,7 +93,6 @@ CONFIG_CPU_SB1_PASS_1=y
# CONFIG_CPU_SB1_PASS_4 is not set
# CONFIG_CPU_SB1_PASS_2_112x is not set
# CONFIG_CPU_SB1_PASS_3 is not set
CONFIG_SIBYTE_HAS_PCI=y
CONFIG_SIBYTE_HAS_LDT=y
# CONFIG_SIMULATION is not set
CONFIG_SIBYTE_CFE=y
......@@ -107,7 +106,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_DUMMY_KEYB=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
......@@ -134,6 +132,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_CPU_RM9000 is not set
CONFIG_CPU_SB1=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_SIBYTE_DMA_PAGEOPS is not set
......@@ -154,6 +153,7 @@ CONFIG_NR_CPUS=2
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -213,7 +213,30 @@ CONFIG_BLK_DEV_INITRD=y
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
CONFIG_BLK_DEV_IDE_SWARM=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
......@@ -228,7 +251,6 @@ CONFIG_BLK_DEV_INITRD=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -371,7 +393,6 @@ CONFIG_NET_SB1250_MAC=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -575,7 +596,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -623,11 +643,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -19,7 +19,6 @@ CONFIG_BROKEN_ON_SMP=y
#
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
......@@ -103,6 +102,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -429,3 +429,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -90,7 +90,6 @@ CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DUMMY_KEYB=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_FB=y
......@@ -115,6 +114,7 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -125,6 +125,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
CONFIG_MMU=y
......@@ -179,7 +180,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
......@@ -191,6 +191,7 @@ CONFIG_IDE_TASKFILE_IO=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -215,7 +216,6 @@ CONFIG_CHR_DEV_SG=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
......@@ -608,7 +608,6 @@ CONFIG_SMB_NLS_REMOTE="cp932"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -681,5 +680,6 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
......@@ -59,7 +59,8 @@ CONFIG_MACH_VR41XX=y
CONFIG_TANBAC_TB0229=y
# CONFIG_VICTOR_MPC30X is not set
# CONFIG_ZAO_CAPCELLA is not set
# CONFIG_VRC4173 is not set
CONFIG_PCI_VR41XX=y
CONFIG_VRC4173=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
......@@ -91,7 +92,6 @@ CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_DUMMY_KEYB=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
CONFIG_TANBAC_TB0219=y
......@@ -117,6 +117,7 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -127,6 +128,7 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
......@@ -196,7 +198,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
......@@ -355,7 +356,6 @@ CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
......@@ -599,7 +599,6 @@ CONFIG_SMB_NLS_REMOTE="cp932"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -672,5 +671,6 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
......@@ -115,6 +115,7 @@ CONFIG_CPU_VR41XX=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_CPU_ADVANCED is not set
......@@ -179,7 +180,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
......@@ -190,6 +190,7 @@ CONFIG_IDE_TASKFILE_IO=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
......@@ -573,7 +574,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -608,3 +608,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -105,6 +105,7 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -496,6 +497,9 @@ CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
......@@ -567,7 +571,6 @@ CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -652,11 +655,13 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -9,20 +9,20 @@ CONFIG_MIPS32=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
......@@ -41,47 +41,40 @@ CONFIG_IOSCHED_CFQ=y
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Machine selection
#
# CONFIG_MACH_JAZZ is not set
# CONFIG_BAGET_MIPS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_DDB5074 is not set
CONFIG_PMC_YOSEMITE=y
# CONFIG_HYPERTRANSPORT is not set
# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_NEC_OSPREY is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SOC_AU1X00 is not set
# CONFIG_SIBYTE_SB1xxx_SOC is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_IRQ_CPU=y
CONFIG_IRQ_CPU_RM7K=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
......@@ -106,6 +99,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_CPU_RM9000=y
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
......@@ -114,15 +108,18 @@ CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_LLDSCD=y
CONFIG_CPU_HAS_SYNC=y
# CONFIG_HIGHMEM is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_HIGHMEM=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
#
......@@ -159,11 +156,14 @@ CONFIG_TRAD_SIGNALS=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -173,40 +173,7 @@ CONFIG_LBD=y
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
......@@ -225,6 +192,7 @@ CONFIG_SCSI_REPORT_LUNS=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
......@@ -234,46 +202,31 @@ CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
......@@ -295,23 +248,50 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
CONFIG_TITAN_GE=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
......@@ -322,10 +302,9 @@ CONFIG_NET_ETHERNET=y
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
......@@ -351,10 +330,8 @@ CONFIG_NET_ETHERNET=y
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO is not set
# CONFIG_SERIO_I8042 is not set
#
# Input Device Drivers
......@@ -364,22 +341,21 @@ CONFIG_SERIO_SERPORT=y
# Character devices
#
# CONFIG_VT is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_STALDRV is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -403,6 +379,7 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
......@@ -438,6 +415,7 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# USB support
#
# CONFIG_USB is not set
#
# USB Gadget Support
......@@ -448,13 +426,8 @@ CONFIG_LEGACY_PTY_COUNT=256
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
......@@ -482,7 +455,6 @@ CONFIG_FS_MBCACHE=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
......@@ -491,13 +463,7 @@ CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
......@@ -509,22 +475,16 @@ CONFIG_RAMFS=y
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFS_V3 is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
......@@ -558,3 +518,4 @@ CONFIG_CMDLINE=""
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
......@@ -114,6 +114,7 @@ CONFIG_CPU_R5000=y
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_BOARD_SCACHE=y
......@@ -196,7 +197,6 @@ CONFIG_BLK_DEV_SR=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
......@@ -750,7 +750,6 @@ CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -850,11 +849,13 @@ CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
......@@ -9,7 +9,7 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
time.o traps.o unaligned.o
ifdef CONFIG_MODULES
obj-y += mips_ksyms.o
obj-y += mips_ksyms.o module.o
obj-$(CONFIG_MIPS32) += module-elf32.o
obj-$(CONFIG_MIPS64) += module-elf64.o
endif
......@@ -23,6 +23,7 @@ obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5432) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R8000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_RM7000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_RM9000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_NEVADA) += r4k_fpu.o r4k_switch.o
......
......@@ -177,7 +177,7 @@ static inline void check_daddi(void)
extern asmlinkage void handle_daddi_ov(void);
unsigned long flags;
void *handler;
long v;
long v, tmp;
printk("Checking for the daddi bug... ");
......@@ -197,13 +197,15 @@ static inline void check_daddi(void)
".set noat\n\t"
".set noreorder\n\t"
".set nomacro\n\t"
"addiu %1, $0, %2\n\t"
"dsrl %1, %1, 1\n\t"
#ifdef HAVE_AS_SET_DADDI
".set daddi\n\t"
#endif
"daddi %0, %1, %2\n\t"
"daddi %0, %1, %3\n\t"
".set pop"
: "=r" (v)
: "r" (0x7fffffffffffedcd), "I" (0x1234));
: "=r" (v), "=&r" (tmp)
: "I" (0xffffffffffffdb9a), "I" (0x1234));
set_except_vector(12, handler);
local_irq_restore(flags);
......@@ -217,9 +219,11 @@ static inline void check_daddi(void)
local_irq_save(flags);
handler = set_except_vector(12, handle_daddi_ov);
asm volatile(
"daddi %0, %1, %2"
: "=r" (v)
: "r" (0x7fffffffffffedcd), "I" (0x1234));
"addiu %1, $0, %2\n\t"
"dsrl %1, %1, 1\n\t"
"daddi %0, %1, %3"
: "=r" (v), "=&r" (tmp)
: "I" (0xffffffffffffdb9a), "I" (0x1234));
set_except_vector(12, handler);
local_irq_restore(flags);
......@@ -240,7 +244,7 @@ static inline void check_daddi(void)
static inline void check_daddiu(void)
{
long v, w;
long v, w, tmp;
printk("Checking for the daddiu bug... ");
......@@ -265,15 +269,17 @@ static inline void check_daddiu(void)
".set noat\n\t"
".set noreorder\n\t"
".set nomacro\n\t"
"addiu %2, $0, %3\n\t"
"dsrl %2, %2, 1\n\t"
#ifdef HAVE_AS_SET_DADDI
".set daddi\n\t"
#endif
"daddiu %0, %2, %3\n\t"
"addiu %1, $0, %3\n\t"
"daddiu %0, %2, %4\n\t"
"addiu %1, $0, %4\n\t"
"daddu %1, %2\n\t"
".set pop"
: "=&r" (v), "=&r" (w)
: "r" (0x7fffffffffffedcd), "I" (0x1234));
: "=&r" (v), "=&r" (w), "=&r" (tmp)
: "I" (0xffffffffffffdb9a), "I" (0x1234));
if (v == w) {
printk("no.\n");
......@@ -283,11 +289,13 @@ static inline void check_daddiu(void)
printk("yes, workaround... ");
asm volatile(
"daddiu %0, %2, %3\n\t"
"addiu %1, $0, %3\n\t"
"addiu %2, $0, %3\n\t"
"dsrl %2, %2, 1\n\t"
"daddiu %0, %2, %4\n\t"
"addiu %1, $0, %4\n\t"
"daddu %1, %2"
: "=&r" (v), "=&r" (w)
: "r" (0x7fffffffffffedcd), "I" (0x1234));
: "=&r" (v), "=&r" (w), "=&r" (tmp)
: "I" (0xffffffffffffdb9a), "I" (0x1234));
if (v == w) {
printk("yes.\n");
......
/*
* Processor capabilities determination functions.
*
* Copyright (C) xxxx the Anonymous
* Copyright (C) 2003 Maciej W. Rozycki
* Copyright (C) 1994 - 2003 Ralf Baechle
* Copyright (C) 2001 MIPS Inc.
*
......@@ -49,6 +51,14 @@ static void r4k_wait(void)
".set\tmips0");
}
/*
* The Au1xxx wait is available only if we run CONFIG_PM and
* the timer setup found we had a 32KHz counter available.
* There are still problems with functions that may call au1k_wait
* directly, but that will be discovered pretty quickly.
*/
extern void (*au1k_wait_ptr)(void);
void au1k_wait(void)
{
#ifdef CONFIG_PM
......@@ -90,7 +100,6 @@ static inline void check_wait(void)
case CPU_R5000:
case CPU_NEVADA:
case CPU_RM7000:
/* case CPU_RM9000: */
case CPU_TX49XX:
case CPU_4KC:
case CPU_4KEC:
......@@ -102,12 +111,19 @@ static inline void check_wait(void)
cpu_wait = r4k_wait;
printk(" available.\n");
break;
#ifdef CONFIG_PM
case CPU_AU1000:
case CPU_AU1100:
case CPU_AU1500:
cpu_wait = au1k_wait;
if (au1k_wait_ptr != NULL) {
cpu_wait = au1k_wait_ptr;
printk(" available.\n");
}
else {
printk(" unavailable.\n");
}
break;
#endif
default:
printk(" unavailable.\n");
break;
......@@ -407,9 +423,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
default:
c->cputype = CPU_UNKNOWN;
break;
}
}
......@@ -475,9 +488,6 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
/* Probe for L2 cache */
c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
break;
default:
c->cputype = CPU_UNKNOWN;
break;
}
}
......@@ -506,9 +516,6 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
}
c->isa_level = MIPS_CPU_ISA_M32;
break;
default:
c->cputype = CPU_UNKNOWN;
break;
}
}
......@@ -528,9 +535,6 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
#endif
break;
default:
c->cputype = CPU_UNKNOWN;
break;
}
}
......@@ -547,9 +551,6 @@ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
c->scache.ways = 8;
c->tlbsize = 64;
break;
default:
c->cputype = CPU_UNKNOWN;
break;
}
}
......@@ -563,7 +564,6 @@ __init void cpu_probe(void)
c->processor_id = read_c0_prid();
switch (c->processor_id & 0xff0000) {
case PRID_COMP_LEGACY:
cpu_probe_legacy(c);
break;
......
......@@ -248,14 +248,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
me->name);
return -ENOEXEC;
}
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
{
return 0;
}
void module_arch_cleanup(struct module *mod)
{
}
......@@ -272,14 +272,3 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
return 0;
}
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
{
return 0;
}
void module_arch_cleanup(struct module *mod)
{
}
#include <linux/module.h>
#include <linux/spinlock.h>
static LIST_HEAD(dbe_list);
static spinlock_t dbe_lock = SPIN_LOCK_UNLOCKED;
/* Given an address, look for it in the module exception tables. */
const struct exception_table_entry *search_module_dbetables(unsigned long addr)
{
unsigned long flags;
const struct exception_table_entry *e = NULL;
struct mod_arch_specific *dbe;
spin_lock_irqsave(&dbe_lock, flags);
list_for_each_entry(dbe, &dbe_list, dbe_list) {
e = search_extable(dbe->dbe_start, dbe->dbe_end - 1, addr);
if (e)
break;
}
spin_unlock_irqrestore(&dbe_lock, flags);
/* Now, if we found one, we are running inside it now, hence
we cannot unload the module, hence no refcnt needed. */
return e;
}
/* Put in dbe list if neccessary. */
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
{
const Elf_Shdr *s;
char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
INIT_LIST_HEAD(&me->arch.dbe_list);
for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
if (strcmp("__dbe_table", secstrings + s->sh_name) != 0)
continue;
me->arch.dbe_start = (void *)s->sh_addr;
me->arch.dbe_end = (void *)s->sh_addr + s->sh_size;
spin_lock_irq(&dbe_lock);
list_add(&me->arch.dbe_list, &dbe_list);
spin_unlock_irq(&dbe_lock);
}
return 0;
}
void module_arch_cleanup(struct module *mod)
{
spin_lock_irq(&dbe_lock);
list_del(&mod->arch.dbe_list);
spin_unlock_irq(&dbe_lock);
}
......@@ -627,6 +627,7 @@ out: jr ra
sys sys_mq_timedreceive 5
sys sys_mq_notify 2 /* 4275 */
sys sys_mq_getsetattr 3
sys sys_ni_syscall 0 /* sys_vserver */
.endm
......
......@@ -447,3 +447,4 @@ sys_call_table:
PTR sys_mq_timedreceive
PTR sys_mq_notify
PTR sys_mq_getsetattr /* 5235 */
PTR sys_ni_syscall /* sys_vserver */
......@@ -357,3 +357,4 @@ EXPORT(sysn32_call_table)
PTR compat_sys_mq_timedreceive
PTR compat_sys_mq_notify
PTR compat_sys_mq_getsetattr /* 6239 */
PTR sys_ni_syscall /* sys_vserver */
......@@ -535,6 +535,7 @@ out: jr ra
sys compat_sys_mq_timedreceive 5
sys compat_sys_mq_notify 2 /* 4275 */
sys compat_sys_mq_getsetattr 3
sys sys_ni_syscall 0 /* sys_vserver */
.endm
......
This diff is collapsed.
......@@ -452,14 +452,18 @@ static void __init do_earlyinitcalls(void)
void __init setup_arch(char **cmdline_p)
{
unsigned int status;
cpu_probe();
prom_init();
cpu_report();
#ifdef CONFIG_MIPS32
/* Disable coprocessors and set FPU for 16/32 FPR register model */
clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_FR);
set_c0_status(ST0_CU0);
status = read_c0_status();
status &= ~(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_FR);
status |= ST0_CU0;
write_c0_status(status);
#endif
#ifdef CONFIG_MIPS64
/*
......@@ -467,8 +471,10 @@ void __init setup_arch(char **cmdline_p)
* Maybe because the kernel is in ckseg0 and not xkphys? Clear it
* anyway ...
*/
clear_c0_status(ST0_BEV|ST0_TS|ST0_CU1|ST0_CU2|ST0_CU3);
set_c0_status(ST0_CU0|ST0_KX|ST0_SX|ST0_FR);
status = read_c0_status();
status &= ~(ST0_BEV|ST0_TS|ST0_CU1|ST0_CU2|ST0_CU3);
status |= (ST0_CU0|ST0_KX|ST0_SX|ST0_FR);
write_c0_status(status);
#endif
#if defined(CONFIG_VT)
......
......@@ -36,7 +36,7 @@
#include <asm/sysmips.h>
#include <asm/uaccess.h>
asmlinkage int sys_pipe(nabi_no_regargs struct pt_regs regs)
asmlinkage int sys_pipe(nabi_no_regargs volatile struct pt_regs regs)
{
int fd[2];
int error, res;
......
......@@ -1639,7 +1639,7 @@ asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf)
printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n",
current->comm, current->pid, fname, buf);
error = verify_area(VERIFY_WRITE, buf, sizeof(struct irix_statvfs));
error = verify_area(VERIFY_WRITE, buf, sizeof(struct irix_statvfs64));
if(error)
goto out;
error = user_path_walk(fname, &nd);
......
......@@ -789,3 +789,8 @@ EXPORT_SYMBOL(rtc_lock);
EXPORT_SYMBOL(to_tm);
EXPORT_SYMBOL(rtc_set_time);
EXPORT_SYMBOL(rtc_get_time);
unsigned long long sched_clock(void)
{
return (unsigned long long)jiffies*(1000000000/HZ);
}
......@@ -234,6 +234,7 @@ void show_regs(struct pt_regs *regs)
void show_registers(struct pt_regs *regs)
{
show_regs(regs);
print_modules();
printk("Process %s (pid: %d, threadinfo=%p, task=%p)\n",
current->comm, current->pid, current_thread_info(), current);
show_stack(current, (long *) regs->regs[29]);
......@@ -278,47 +279,8 @@ void __declare_dbe_table(void)
);
}
#ifdef CONFIG_MDULES
/* Given an address, look for it in the module exception tables. */
const struct exception_table_entry *search_module_dbetables(unsigned long addr)
{
unsigned long flags;
const struct exception_table_entry *e = NULL;
struct module *mod;
spin_lock_irqsave(&modlist_lock, flags);
list_for_each_entry(mod, &modules, list) {
if (mod->arch.num_dbeentries == 0)
continue;
e = search_extable(mod->arch.dbe_table_start,
mod->arch.dbe_table_end +
mod->arch.num_dbeentries - 1,
addr);
if (e)
break;
}
spin_unlock_irqrestore(&modlist_lock, flags);
/* Now, if we found one, we are running inside it now, hence
we cannot unload the module, hence no refcnt needed. */
return e;
}
#else
/* Given an address, look for it in the exception tables. */
static inline const struct exception_table_entry *
search_module_dbetables(unsigned long addr)
{
return NULL;
}
#endif
/* Given an address, look for it in the exception tables. */
const struct exception_table_entry *search_dbe_tables(unsigned long addr)
static const struct exception_table_entry *search_dbe_tables(unsigned long addr)
{
const struct exception_table_entry *e;
......@@ -745,12 +707,25 @@ asmlinkage void do_reserved(struct pt_regs *regs)
static inline void parity_protection_init(void)
{
switch (current_cpu_data.cputype) {
case CPU_24K:
/* 24K cache parity not currently implemented in FPGA */
printk(KERN_INFO "Disable cache parity protection for "
"MIPS 24K CPU.\n");
write_c0_ecc(read_c0_ecc() & ~0x80000000);
break;
case CPU_5KC:
/* Set the PE bit (bit 31) in the c0_ecc register. */
printk(KERN_INFO "Enable the cache parity protection for "
"MIPS 5KC CPUs.\n");
printk(KERN_INFO "Enable cache parity protection for "
"MIPS 5KC/24K CPUs.\n");
write_c0_ecc(read_c0_ecc() | 0x80000000);
break;
case CPU_20KC:
case CPU_25KF:
/* Clear the DE bit (bit 16) in the c0_status register. */
printk(KERN_INFO "Enable cache parity protection for "
"MIPS 20KC/25KF CPUs.\n");
clear_c0_status(ST0_DE);
break;
default:
break;
}
......
......@@ -4,10 +4,22 @@
lib-y += csum_partial.o memset.o watch.o
ifeq ($(CONFIG_CPU_R3000)$(CONFIG_CPU_TX39XX),y)
lib-y += r3k_dump_tlb.o
else
lib-y += dump_tlb.o
endif
obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o
obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o
obj-$(CONFIG_CPU_NEVADA) += dump_tlb.o
obj-$(CONFIG_CPU_R10000) += dump_tlb.o
obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o
obj-$(CONFIG_CPU_R4300) += dump_tlb.o
obj-$(CONFIG_CPU_R4X00) += dump_tlb.o
obj-$(CONFIG_CPU_R5000) += dump_tlb.o
obj-$(CONFIG_CPU_R5432) += dump_tlb.o
obj-$(CONFIG_CPU_R6000) +=
obj-$(CONFIG_CPU_R8000) +=
obj-$(CONFIG_CPU_RM7000) += dump_tlb.o
obj-$(CONFIG_CPU_RM9000) += dump_tlb.o
obj-$(CONFIG_CPU_SB1) += dump_tlb.o
obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o
obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o
obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o
EXTRA_AFLAGS := $(CFLAGS)
......@@ -4,10 +4,22 @@
lib-y += csum_partial.o memset.o watch.o
ifeq ($(CONFIG_CPU_R3000)$(CONFIG_CPU_TX39XX),y)
lib-y += r3k_dump_tlb.o
else
lib-y += dump_tlb.o
endif
obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o
obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o
obj-$(CONFIG_CPU_NEVADA) += dump_tlb.o
obj-$(CONFIG_CPU_R10000) += dump_tlb.o
obj-$(CONFIG_CPU_R3000) += r3k_dump_tlb.o
obj-$(CONFIG_CPU_R4300) += dump_tlb.o
obj-$(CONFIG_CPU_R4X00) += dump_tlb.o
obj-$(CONFIG_CPU_R5000) += dump_tlb.o
obj-$(CONFIG_CPU_R5432) += dump_tlb.o
obj-$(CONFIG_CPU_R6000) +=
obj-$(CONFIG_CPU_R8000) +=
obj-$(CONFIG_CPU_RM7000) += dump_tlb.o
obj-$(CONFIG_CPU_RM9000) += dump_tlb.o
obj-$(CONFIG_CPU_SB1) += dump_tlb.o
obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o
obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o
obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o
EXTRA_AFLAGS := $(CFLAGS)
......@@ -51,7 +51,9 @@ void __init prom_init_cmdline(void)
*cp++ = ' ';
actr++;
}
if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
if (cp != &(arcs_cmdline[0])) {
/* get rid of trailing space */
--cp;
*cp = '\0';
}
}
......@@ -59,7 +59,7 @@ static inline void serial_out(int offset, int value)
outb(value, PORT(offset));
}
int putPromChar(char c)
int prom_putchar(char c)
{
while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
;
......@@ -69,7 +69,7 @@ int putPromChar(char c)
return 1;
}
char getPromChar(void)
char prom_getchar(void)
{
while (!(serial_in(UART_LSR) & UART_LSR_DR))
;
......@@ -77,33 +77,3 @@ char getPromChar(void)
return serial_in(UART_RX);
}
static spinlock_t con_lock = SPIN_LOCK_UNLOCKED;
static char buf[1024];
void __init prom_printf(char *fmt, ...)
{
va_list args;
int l;
char *p, *buf_end;
long flags;
spin_lock_irqsave(con_lock, flags);
va_start(args, fmt);
l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
va_end(args);
buf_end = buf + l;
for (p = buf; p < buf_end; p++) {
/* Crude cr/nl handling is better than none */
if (*p == '\n')
putPromChar('\r');
putPromChar(*p);
}
/* wait for output to drain */
while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
;
spin_unlock_irqrestore(con_lock, flags);
}
#
# Makefile for the Linux/MIPS-specific parts of the memory manager.
#
obj-$(CONFIG_CPU_TX49XX) += tlbex-r4k.o
obj-$(CONFIG_CPU_R4300) += tlbex-r4k.o
obj-$(CONFIG_CPU_R4X00) += tlbex-r4k.o
obj-$(CONFIG_CPU_VR41XX) += tlbex-r4k.o
obj-$(CONFIG_CPU_R5000) += tlbex-r4k.o
obj-$(CONFIG_CPU_NEVADA) += tlbex-r4k.o
obj-$(CONFIG_CPU_R5432) += tlbex-r4k.o
obj-$(CONFIG_CPU_RM7000) += tlbex-r4k.o
obj-$(CONFIG_CPU_RM9000) += tlbex-r4k.o
obj-$(CONFIG_CPU_R10000) += tlbex-r4k.o
obj-$(CONFIG_CPU_MIPS32) += tlbex-r4k.o
obj-$(CONFIG_CPU_MIPS64) += tlbex-r4k.o
obj-$(CONFIG_CPU_SB1) += tlbex-r4k.o
EXTRA_AFLAGS := $(CFLAGS)
#
# Makefile for the Linux/MIPS-specific parts of the memory manager.
#
obj-y := tlbex-r4k.o
obj-$(CONFIG_CPU_R4300) += tlb-glue-r4k.o
obj-$(CONFIG_CPU_R4X00) += tlb-glue-r4k.o
obj-$(CONFIG_CPU_R5000) += tlb-glue-r4k.o
obj-$(CONFIG_CPU_NEVADA) += tlb-glue-r4k.o
obj-$(CONFIG_CPU_R5432) += tlb-glue-r4k.o
obj-$(CONFIG_CPU_RM7000) += tlb-glue-r4k.o
obj-$(CONFIG_CPU_RM9000) += tlb-glue-r4k.o
obj-$(CONFIG_CPU_R10000) += tlb-glue-r4k.o
obj-$(CONFIG_CPU_SB1) += tlb-glue-sb1.o
obj-$(CONFIG_CPU_MIPS64) += tlb-glue-r4k.o
#
# Debug TLB exception handler, currently unused
#
#obj-y += tlb-dbg-r4k.o
AFLAGS_tlb-glue-r4k.o := -P
EXTRA_AFLAGS := $(CFLAGS)
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1999 Ralf Baechle
* Copyright (C) 1999 Silicon Graphics, Inc.
*
* TLB debugging routines. These perform horribly slow but can easily be
* modified for debugging purposes.
*/
#include <linux/linkage.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
#include <asm/system.h>
asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
unsigned long address);
asmlinkage void tlb_refill_debug(struct pt_regs regs)
{
show_regs(&regs);
panic("%s called. This Does Not Happen (TM).", __FUNCTION__);
}
asmlinkage void xtlb_refill_debug(struct pt_regs *regs)
{
unsigned long addr;
pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
addr = regs->cp0_badvaddr & ~((PAGE_SIZE << 1) - 1);
pgd = pgd_offset(current->active_mm, addr);
pmd = pmd_offset(pgd, addr);
pte = pte_offset(pmd, addr);
write_c0_entrylo0(pte_val(pte[0]) >> 6);
write_c0_entrylo1(pte_val(pte[1]) >> 6);
__asm__ __volatile__("nop;nop;nop");
tlb_write_random();
}
asmlinkage void xtlb_mod_debug(struct pt_regs *regs)
{
unsigned long addr;
addr = regs->cp0_badvaddr;
do_page_fault(regs, 1, addr);
}
asmlinkage void xtlb_tlbl_debug(struct pt_regs *regs)
{
unsigned long addr;
addr = regs->cp0_badvaddr;
do_page_fault(regs, 0, addr);
}
asmlinkage void xtlb_tlbs_debug(struct pt_regs *regs)
{
unsigned long addr;
addr = regs->cp0_badvaddr;
do_page_fault(regs, 1, addr);
}
......@@ -12,19 +12,54 @@ obj-$(CONFIG_CPU_MIPS32) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_MIPS64) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_NEVADA) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_R10000) += c-r4k.o cex-gen.o pg-r4k.o tlb-andes.o
obj-$(CONFIG_CPU_R3000) += c-r3k.o tlb-r3k.o pg-r4k.o tlbex-r3k.o
obj-$(CONFIG_CPU_R3000) += c-r3k.o tlb-r3k.o pg-r4k.o
obj-$(CONFIG_CPU_R4300) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_R4X00) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_R5000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_R5432) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_R8000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r8k.o
obj-$(CONFIG_CPU_RM7000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_RM9000) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_SB1) += c-sb1.o cerr-sb1.o cex-sb1.o pg-sb1.o \
tlb-sb1.o
obj-$(CONFIG_CPU_TX39XX) += c-tx39.o pg-r4k.o tlb-r3k.o tlbex-r3k.o
obj-$(CONFIG_CPU_TX39XX) += c-tx39.o pg-r4k.o tlb-r3k.o
obj-$(CONFIG_CPU_TX49XX) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
#
# TLB exception handling code differs between 32-bit and 64-bit kernels.
#
ifdef CONFIG_MIPS32
obj-$(CONFIG_CPU_R3000) += tlbex32-r3k.o
obj-$(CONFIG_CPU_TX49XX) += tlbex32-r4k.o
obj-$(CONFIG_CPU_R4300) += tlbex32-r4k.o
obj-$(CONFIG_CPU_R4X00) += tlbex32-r4k.o
obj-$(CONFIG_CPU_VR41XX) += tlbex32-r4k.o
obj-$(CONFIG_CPU_R5000) += tlbex32-r4k.o
obj-$(CONFIG_CPU_NEVADA) += tlbex32-r4k.o
obj-$(CONFIG_CPU_R5432) += tlbex32-r4k.o
obj-$(CONFIG_CPU_RM7000) += tlbex32-r4k.o
obj-$(CONFIG_CPU_RM9000) += tlbex32-r4k.o
obj-$(CONFIG_CPU_R10000) += tlbex32-r4k.o
obj-$(CONFIG_CPU_MIPS32) += tlbex32-r4k.o
obj-$(CONFIG_CPU_MIPS64) += tlbex32-r4k.o
obj-$(CONFIG_CPU_SB1) += tlbex32-r4k.o
obj-$(CONFIG_CPU_TX39XX) += tlbex32-r3k.o
endif
ifdef CONFIG_MIPS64
obj-$(CONFIG_CPU_R4300) += tlb64-glue-r4k.o tlbex64-r4k.o
obj-$(CONFIG_CPU_R4X00) += tlb64-glue-r4k.o tlbex64-r4k.o
obj-$(CONFIG_CPU_R5000) += tlb64-glue-r4k.o tlbex64-r4k.o
obj-$(CONFIG_CPU_NEVADA) += tlb64-glue-r4k.o tlbex64-r4k.o
obj-$(CONFIG_CPU_R5432) += tlb64-glue-r4k.o tlbex64-r4k.o
obj-$(CONFIG_CPU_RM7000) += tlb64-glue-r4k.o tlbex64-r4k.o
obj-$(CONFIG_CPU_RM9000) += tlb64-glue-r4k.o tlbex64-r4k.o
obj-$(CONFIG_CPU_R10000) += tlb64-glue-r4k.o tlbex64-r4k.o
obj-$(CONFIG_CPU_SB1) += tlb64-glue-sb1.o tlbex64-r4k.o
obj-$(CONFIG_CPU_MIPS64) += tlb64-glue-r4k.o tlbex64-r4k.o
endif
obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o
obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
* Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle ralf@gnu.org
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/system.h>
extern void except_vec0_generic(void);
extern void except_vec1_r8k(void);
#define TFP_TLB_SIZE 384
#define TFP_TLB_SET_SHIFT 7
/* CP0 hazard avoidance. */
#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
"nop; nop; nop; nop; nop; nop;\n\t" \
".set reorder\n\t")
void local_flush_tlb_all(void)
{
unsigned long flags;
unsigned long old_ctx;
int entry;
local_irq_save(flags);
/* Save old context and create impossible VPN2 value */
old_ctx = read_c0_entryhi();
write_c0_entrylo(0);
for (entry = 0; entry < TFP_TLB_SIZE; entry++) {
write_c0_tlbset(entry >> TFP_TLB_SET_SHIFT);
write_c0_vaddr(entry << PAGE_SHIFT);
write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
mtc0_tlbw_hazard();
tlb_write();
}
tlbw_use_hazard();
write_c0_entryhi(old_ctx);
local_irq_restore(flags);
}
void local_flush_tlb_mm(struct mm_struct *mm)
{
int cpu = smp_processor_id();
if (cpu_context(cpu, mm) != 0)
drop_mmu_context(mm,cpu);
}
void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end)
{
struct mm_struct *mm = vma->vm_mm;
int cpu = smp_processor_id();
unsigned long flags;
int oldpid, newpid, size;
if (!cpu_context(cpu, mm))
return;
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
local_irq_save(flags);
if (size > TFP_TLB_SIZE / 2) {
drop_mmu_context(mm, cpu);
goto out_restore;
}
oldpid = read_c0_entryhi();
newpid = cpu_asid(cpu, mm);
write_c0_entrylo(0);
start &= PAGE_MASK;
end += (PAGE_SIZE - 1);
end &= PAGE_MASK;
while (start < end) {
signed long idx;
write_c0_vaddr(start);
write_c0_entryhi(start);
start += PAGE_SIZE;
tlb_probe();
idx = read_c0_tlbset();
if (idx < 0)
continue;
write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
tlb_write();
}
write_c0_entryhi(oldpid);
out_restore:
local_irq_restore(flags);
}
/* Usable for KV1 addresses only! */
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
unsigned long flags;
int size;
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
if (size > TFP_TLB_SIZE / 2) {
local_flush_tlb_all();
return;
}
local_irq_save(flags);
write_c0_entrylo(0);
start &= PAGE_MASK;
end += (PAGE_SIZE - 1);
end &= PAGE_MASK;
while (start < end) {
signed long idx;
write_c0_vaddr(start);
write_c0_entryhi(start);
start += PAGE_SIZE;
tlb_probe();
idx = read_c0_tlbset();
if (idx < 0)
continue;
write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
tlb_write();
}
local_irq_restore(flags);
}
void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
{
int cpu = smp_processor_id();
unsigned long flags;
int oldpid, newpid;
signed long idx;
if (!cpu_context(cpu, vma->vm_mm))
return;
newpid = cpu_asid(cpu, vma->vm_mm);
page &= PAGE_MASK;
local_irq_save(flags);
oldpid = read_c0_entryhi();
write_c0_vaddr(page);
write_c0_entryhi(newpid);
tlb_probe();
idx = read_c0_tlbset();
if (idx < 0)
goto finish;
write_c0_entrylo(0);
write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1)));
tlb_write();
finish:
write_c0_entryhi(oldpid);
local_irq_restore(flags);
}
/*
* We will need multiple versions of update_mmu_cache(), one that just
* updates the TLB with the new pte(s), and another which also checks
* for the R4k "end of page" hardware bug and does the needy.
*/
void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
{
unsigned long flags;
pgd_t *pgdp;
pmd_t *pmdp;
pte_t *ptep;
int pid;
/*
* Handle debugger faulting in for debugee.
*/
if (current->active_mm != vma->vm_mm)
return;
pid = read_c0_entryhi() & ASID_MASK;
local_irq_save(flags);
address &= PAGE_MASK;
write_c0_vaddr(address);
write_c0_entryhi(pid);
pgdp = pgd_offset(vma->vm_mm, address);
pmdp = pmd_offset(pgdp, address);
ptep = pte_offset_map(pmdp, address);
tlb_probe();
write_c0_entrylo(pte_val(*ptep++) >> 6);
tlb_write();
write_c0_entryhi(pid);
local_irq_restore(flags);
}
static void __init probe_tlb(unsigned long config)
{
struct cpuinfo_mips *c = &current_cpu_data;
c->tlbsize = 3 * 128; /* 3 sets each 128 entries */
}
void __init tlb_init(void)
{
unsigned int config = read_c0_config();
unsigned long status;
probe_tlb(config);
status = read_c0_status();
status &= ~(ST0_UPS | ST0_KPS);
#ifdef CONFIG_PAGE_SIZE_4KB
status |= (TFP_PAGESIZE_4K << 32) | (TFP_PAGESIZE_4K << 36);
#elif defined(CONFIG_PAGE_SIZE_8KB)
status |= (TFP_PAGESIZE_8K << 32) | (TFP_PAGESIZE_8K << 36);
#elif defined(CONFIG_PAGE_SIZE_16KB)
status |= (TFP_PAGESIZE_16K << 32) | (TFP_PAGESIZE_16K << 36);
#elif defined(CONFIG_PAGE_SIZE_64KB)
status |= (TFP_PAGESIZE_64K << 32) | (TFP_PAGESIZE_64K << 36);
#endif
write_c0_status(status);
write_c0_wired(0);
local_flush_tlb_all();
memcpy((void *)(CKSEG0 + 0x00), &except_vec0_generic, 0x80);
memcpy((void *)(CKSEG0 + 0x80), except_vec1_r8k, 0x80);
flush_icache_range(CKSEG0 + 0x80, CKSEG0 + 0x100);
}
......@@ -125,7 +125,7 @@ void local_flush_tlb_all(void)
* with the firmware, go back and give all the entries invalid addresses with
* the normal flush routine. Wired entries will be killed as well!
*/
void sb1_sanitize_tlb(void)
static void __init sb1_sanitize_tlb(void)
{
int entry;
long addr = 0;
......
......@@ -245,20 +245,6 @@ void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
{
}
/*
* SMP support
*/
int prom_setup_smp(void)
{
int num_cpus = 2;
/*
* We know that the RM9000 on the Jaguar ATX board has 2 cores.
* Hence, this can be hardcoded for now.
*/
return num_cpus;
}
int prom_boot_secondary(int cpu, unsigned long sp, unsigned long gp)
{
/* Clear the semaphore */
......
......@@ -46,6 +46,7 @@
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <linux/swap.h>
#include <linux/ioport.h>
#include <linux/sched.h>
......@@ -57,7 +58,6 @@
#include <asm/page.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pci.h>
#include <asm/pci_channel.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
......
......@@ -2,7 +2,7 @@
# Makefile for Momentum Computer's Ocelot-C and -CS boards.
#
obj-y += cpci-irq.o uart-irq.o int-handler.o irq.o pci-irq.o \
prom.o reset.o setup.o
obj-y += cpci-irq.o int-handler.o irq.o prom.o reset.o \
setup.o uart-irq.o
obj-$(CONFIG_KGDB) += dbg_io.o
......@@ -44,8 +44,9 @@
#include <asm/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/mv64340.h>
#include <asm/system.h>
extern asmlinkage void ocelot_handle_int(void);
......
......@@ -147,13 +147,14 @@ char *arg64(unsigned long addrin, int arg_index)
#endif /* CONFIG_MIPS64 */
/* [jsun@junsun.net] PMON passes arguments in C main() style */
void __init prom_init(void)
{
int argc = fw_arg0;
char **arg = (char **) fw_arg1;
char **env = (char **) fw_arg2;
struct callvectors *cv = (struct callvectors *) fw_arg3;
int i;
#ifdef CONFIG_MIPS64
char *ptr;
......
......@@ -193,7 +193,7 @@ int m48t37y_set_time(unsigned long sec)
rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
/* day of week -- not really used, but let's keep it up-to-date */
rtc_base[0x7ffc] = CONV_BIN2BCD(tm.tm_wday + 1);
rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
/* disable writing */
rtc_base[0x7ff8] = 0x00;
......
......@@ -2,8 +2,7 @@
# Makefile for Momentum Computer's Ocelot-G board.
#
obj-y += gt-irq.o pci-irq.o int-handler.o irq.o prom.o \
reset.o setup.o
obj-y += int-handler.o irq.o gt-irq.o prom.o reset.o setup.o
obj-$(CONFIG_KGDB) += dbg_io.o
EXTRA_AFLAGS := $(CFLAGS)
......@@ -17,8 +17,8 @@
#include <asm/ptrace.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <asm/gt64240.h>
#include <asm/io.h>
#include "gt64240.h"
unsigned long bus_clock;
......@@ -108,25 +108,25 @@ int disable_galileo_irq(int int_cause, int bit_num)
* we keep this particular structure in the function.
*/
static void gt64240_p0int_irq(int irq, void *dev_id, struct pt_regs *regs)
static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs)
{
uint32_t irq_src, irq_src_mask;
int handled;
/* get the low interrupt cause register */
GT_READ(LOW_INTERRUPT_CAUSE_REGISTER, &irq_src);
irq_src = GT_READ(LOW_INTERRUPT_CAUSE_REGISTER);
/* get the mask register for this pin */
GT_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, &irq_src_mask);
irq_src_mask = GT_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
/* mask off only the interrupts we're interested in */
irq_src = irq_src & irq_src_mask;
handled = 0;
handled = IRQ_NONE;
/* Check for timer interrupt */
if (irq_src & 0x00000100) {
handled = 1;
handled = IRQ_HANDLED;
irq_src &= ~0x00000100;
/* Clear any pending cause bits */
......@@ -141,90 +141,8 @@ static void gt64240_p0int_irq(int irq, void *dev_id, struct pt_regs *regs)
"UNKNOWN P0_INT# interrupt received, irq_src=0x%x\n",
irq_src);
}
}
/*
* Interrupt handler for interrupts coming from the Galileo chip.
* It could be built in ethernet ports etc...
*/
static void gt64240_irq(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned int irq_src, int_high_src, irq_src_mask,
int_high_src_mask;
int handled;
#if 0
GT_READ(GT_INTRCAUSE_OFS, &irq_src);
GT_READ(GT_INTRMASK_OFS, &irq_src_mask);
GT_READ(GT_HINTRCAUSE_OFS, &int_high_src);
GT_READ(GT_HINTRMASK_OFS, &int_high_src_mask);
#endif
irq_src = irq_src & irq_src_mask;
int_high_src = int_high_src & int_high_src_mask;
handled = 0;
/* Execute all interrupt handlers */
/* Check for timer interrupt */
if (irq_src & 0x00000800) {
handled = 1;
irq_src &= ~0x00000800;
// RESET_REG_BITS (INTERRUPT_CAUSE_REGISTER,BIT8);
do_timer(regs);
}
if (irq_src) {
printk(KERN_INFO
"Other Galileo interrupt received irq_src %x\n",
irq_src);
#if CURRENTLY_UNUSED
for (count = 0; count < MAX_CAUSE_REG_WIDTH; count++) {
if (irq_src & (1 << count)) {
if (irq_handlers[INT_CAUSE_MAIN][count].
routine) {
queue_task(&irq_handlers
[INT_CAUSE_MAIN][count],
&tq_immediate);
mark_bh(IMMEDIATE_BH);
handled = 1;
}
}
}
#endif /* UNUSED */
}
#if 0
GT_WRITE(GT_INTRCAUSE_OFS, 0);
GT_WRITE(GT_HINTRCAUSE_OFS, 0);
#endif
#undef GALILEO_I2O
#ifdef GALILEO_I2O
/*
* Future I2O support. We currently attach I2O interrupt handlers to
* the Galileo interrupt (int 4) and handle them in do_IRQ.
*/
if (isInBoundDoorBellInterruptSet()) {
printk(KERN_INFO "I2O doorbell interrupt received.\n");
handled = 1;
}
if (isInBoundPostQueueInterruptSet()) {
printk(KERN_INFO "I2O Queue interrupt received.\n");
handled = 1;
}
/*
* This normally would be outside of the ifdef, but since we're
* handling I2O outside of this handler, this printk shows up every
* time we get a valid I2O interrupt. So turn this off for now.
*/
if (handled == 0) {
if (counter < 50) {
printk("Spurious Galileo interrupt...\n");
counter++;
}
}
#endif
return handled;
}
/*
......
This diff is collapsed.
/***********************************************************************
* Copyright 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* arch/mips/gt64240/gt64240-dep.h
* Board-dependent definitions for GT-64120 chip.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
***********************************************************************
*/
#ifndef _ASM_GT64240_DEP_H
#define _ASM_GT64240_DEP_H
#include <asm/addrspace.h> /* for KSEG1ADDR() */
#include <asm/byteorder.h> /* for cpu_to_le32() */
/*
* PCI address allocation
*/
#if 0
#define GT_PCI_MEM_BASE (0x22000000)
#define GT_PCI_MEM_SIZE GT_DEF_PCI0_MEM0_SIZE
#define GT_PCI_IO_BASE (0x20000000)
#define GT_PCI_IO_SIZE GT_DEF_PCI0_IO_SIZE
#endif
extern unsigned long gt64240_base;
#define GT64240_BASE (gt64240_base)
/*
* Because of an error/peculiarity in the Galileo chip, we need to swap the
* bytes when running bigendian.
*/
#define GT_WRITE(ofs, data) \
*(volatile u32 *)(GT64240_BASE+(ofs)) = cpu_to_le32(data)
#define GT_READ(ofs, data) \
*(data) = le32_to_cpu(*(volatile u32 *)(GT64240_BASE+(ofs)))
#define GT_READ_DATA(ofs) \
le32_to_cpu(*(volatile u32 *)(GT64240_BASE+(ofs)))
#define GT_WRITE_16(ofs, data) \
*(volatile u16 *)(GT64240_BASE+(ofs)) = cpu_to_le16(data)
#define GT_READ_16(ofs, data) \
*(data) = le16_to_cpu(*(volatile u16 *)(GT64240_BASE+(ofs)))
#define GT_WRITE_8(ofs, data) \
*(volatile u8 *)(GT64240_BASE+(ofs)) = data
#define GT_READ_8(ofs, data) \
*(data) = *(volatile u8 *)(GT64240_BASE+(ofs))
#endif /* _ASM_GT64120_MOMENCO_OCELOT_GT64120_DEP_H */
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment