Merge ssh://mulgrave-w/BK/scsi-misc-2.5

into raven.il.steeleye.com:/home/jejb/BK/scsi-for-linus-2.5

drivers/acorn/scsi/acornscsi.c

@@ -2935,9 +2935,9 @@ int acornscsi_proc_info(char *buffer, char **start, off_t offset,
 	}
     }
 
-    p += sprintf(p, "\nAttached devices:%s\n", instance->host_queue ? "" : " none");
+    p += sprintf(p, "\nAttached devices:\n");
 
-    for (scd = instance->host_queue; scd; scd = scd->next) {
+    list_for_each_entry(scd, &instance->my_devices, siblings) {
 	int len;
 
 	proc_print_scsidevice(scd, p, &len, 0);

drivers/acorn/scsi/arxescsi.c

@@ -311,7 +311,7 @@ int arxescsi_proc_info(char *buffer, char **start, off_t offset,
 
 	pos += sprintf (buffer+pos, "\nAttached devices:\n");
 
-	for (scd = host->host_queue; scd; scd = scd->next) {
+	list_for_each_entry(scd, &host->my_devices, siblings) {
 		pos += fas216_print_device(&info->info, scd, buffer + pos);
 
 		if (pos + begin < offset) {

drivers/acorn/scsi/cumana_2.c

@@ -387,7 +387,7 @@ int cumanascsi_2_proc_info (char *buffer, char **start, off_t offset,
 
 	pos += sprintf(buffer+pos, "\nAttached devices:\n");
 
-	for (scd = host->host_queue; scd; scd = scd->next) {
+	list_for_each_entry(scd, &host->my_devices, siblings) {
 		int len;
 
 		proc_print_scsidevice(scd, buffer, &len, pos);

drivers/acorn/scsi/eesox.c

@@ -390,7 +390,7 @@ int eesoxscsi_proc_info(char *buffer, char **start, off_t offset,
 
 	pos += sprintf(buffer+pos, "\nAttached devices:\n");
 
-	for (scd = host->host_queue; scd; scd = scd->next) {
+	list_for_each_entry(scd, &host->my_devices, siblings) {
 		int len;
 
 		proc_print_scsidevice(scd, buffer, &len, pos);

drivers/acorn/scsi/fas216.c

@@ -2631,7 +2631,7 @@ int fas216_eh_bus_reset(Scsi_Cmnd *SCpnt)
 	 * all command structures.  Leave the running
 	 * command in place.
 	 */
-	for (SDpnt = info->host->host_queue; SDpnt; SDpnt = SDpnt->next) {
+	list_for_each_entry(SDpnt, &info->host->my_devices, siblings) {
 		int i;
 
 		if (SDpnt->soft_reset)

drivers/acorn/scsi/powertec.c

@@ -269,7 +269,7 @@ int powertecscsi_proc_info(char *buffer, char **start, off_t offset,
 
 	pos += sprintf(buffer+pos, "\nAttached devices:\n");
 
-	for (scd = host->host_queue; scd; scd = scd->next) {
+	list_for_each_entry(scd, &host->my_devices, siblings) {
 		pos += fas216_print_device(&info->info, scd, buffer + pos);
 
 		if (pos + begin < offset) {

drivers/char/tty_io.c

@@ -372,6 +372,8 @@ int tty_check_change(struct tty_struct * tty)
 	return -ERESTARTSYS;
 }
 
+EXPORT_SYMBOL(tty_check_change);
+
 static ssize_t hung_up_tty_read(struct file * file, char * buf,
 				size_t count, loff_t *ppos)
 {
@@ -540,6 +542,8 @@ void tty_hangup(struct tty_struct * tty)
 	schedule_work(&tty->hangup_work);
 }
 
+EXPORT_SYMBOL(tty_hangup);
+
 void tty_vhangup(struct tty_struct * tty)
 {
 #ifdef TTY_DEBUG_HANGUP
@@ -556,6 +560,8 @@ int tty_hung_up_p(struct file * filp)
 	return (filp->f_op == &hung_up_tty_fops);
 }
 
+EXPORT_SYMBOL(tty_hung_up_p);
+
 /*
  * This function is typically called only by the session leader, when
  * it wants to disassociate itself from its controlling tty.
@@ -1886,6 +1892,8 @@ void do_SAK(struct tty_struct *tty)
 	schedule_work(&tty->SAK_work);
 }
 
+EXPORT_SYMBOL(do_SAK);
+
 /*
  * This routine is called out of the software interrupt to flush data
  * from the flip buffer to the line discipline.
@@ -1946,34 +1954,44 @@ static int baud_table[] = {
 #endif
 };
 
-static int n_baud_table = sizeof(baud_table)/sizeof(int);
+static int n_baud_table = ARRAY_SIZE(baud_table);
 
-int tty_get_baud_rate(struct tty_struct *tty)
+int tty_termios_baud_rate(struct termios *termios)
 {
-	unsigned int cflag, i;
+	unsigned int cbaud = termios->c_cflag & CBAUD;
 
-	cflag = tty->termios->c_cflag;
+	if (cbaud & CBAUDEX) {
+		cbaud &= ~CBAUDEX;
 
-	i = cflag & CBAUD;
-	if (i & CBAUDEX) {
-		i &= ~CBAUDEX;
-		if (i < 1 || i+15 >= n_baud_table) 
-			tty->termios->c_cflag &= ~CBAUDEX;
+		if (cbaud < 1 || cbaud + 15 > n_baud_table)
+			termios->c_cflag &= ~CBAUDEX;
 		else
-			i += 15;
+			cbaud += 15;
 	}
-	if (i==15 && tty->alt_speed) {
+
+	return baud_table[cbaud];
+}
+
+EXPORT_SYMBOL(tty_termios_baud_rate);
+
+int tty_get_baud_rate(struct tty_struct *tty)
+{
+	int baud = tty_termios_baud_rate(tty->termios);
+
+	if (baud == 38400 && tty->alt_speed) {
 		if (!tty->warned) {
 			printk(KERN_WARNING "Use of setserial/setrocket to "
 					    "set SPD_* flags is deprecated\n");
 			tty->warned = 1;
 		}
-		return(tty->alt_speed);
+		baud = tty->alt_speed;
 	}
 	
-	return baud_table[i];
+	return baud;
 }
 
+EXPORT_SYMBOL(tty_get_baud_rate);
+
 void tty_flip_buffer_push(struct tty_struct *tty)
 {
 	if (tty->low_latency)

drivers/serial/8250.c

@@ -517,7 +517,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	unsigned char save_lcr, save_mcr;
 	unsigned long flags;
 
-	if (!up->port.iobase && !up->port.membase)
+	if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
 		return;
 
 	DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%08lx): ",
@@ -1031,7 +1031,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 
 		ret = request_irq(up->port.irq, serial8250_interrupt,
 				  irq_flags, "serial", i);
-		if (ret)
+		if (ret < 0)
 			serial_do_unlink(i, up);
 	}
 
@@ -1623,7 +1623,7 @@ static int serial8250_request_port(struct uart_port *port)
 	if (up->port.flags & UPF_RESOURCES) {
 		if (up->port.type == PORT_RSA) {
 			ret = serial8250_request_rsa_resource(up, &res_rsa);
-			if (ret)
+			if (ret < 0)
 				return ret;
 		}
 
@@ -1641,7 +1641,7 @@ static int serial8250_request_port(struct uart_port *port)
 			ret = -ENOMEM;
 	}
 
-	if (ret) {
+	if (ret < 0) {
 		if (res_rsa)
 			release_resource(res_rsa);
 		if (res)
@@ -1671,11 +1671,11 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	 */
 	if (up->port.flags & UPF_RESOURCES) {
 		ret = serial8250_request_std_resource(up, &res_std);
-		if (ret)
+		if (ret < 0)
 			return;
 
 		ret = serial8250_request_rsa_resource(up, &res_rsa);
-		if (ret)
+		if (ret < 0)
 			probeflags &= ~PROBE_RSA;
 	} else {
 		probeflags &= ~PROBE_RSA;
@@ -1950,6 +1950,7 @@ static int __register_serial(struct serial_struct *req, int line)
 	port.regshift = req->iomem_reg_shift;
 	port.iotype   = req->io_type;
 	port.flags    = req->flags | UPF_BOOT_AUTOCONF;
+	port.mapbase  = req->iomap_base;
 	port.line     = line;
 
 	if (share_irqs)
@@ -2029,11 +2030,10 @@ static int __init serial8250_init(void)
 		spin_lock_init(&irq_lists[i].lock);
 
 	ret = uart_register_driver(&serial8250_reg);
-	if (ret)
-		return ret;
+	if (ret >= 0)
+		serial8250_register_ports(&serial8250_reg);
 
-	serial8250_register_ports(&serial8250_reg);
-	return 0;
+	return ret;
 }
 
 static void __exit serial8250_exit(void)

drivers/serial/8250_pci.c

@@ -176,6 +176,7 @@ get_pci_port(struct pci_dev *dev, struct pci_board *board,
 		return 0;
 	}
 	req->io_type = SERIAL_IO_MEM;
+	req->iomap_base = port;
 	req->iomem_base = ioremap(port, board->uart_offset);
 	if (req->iomem_base == NULL)
 		return -ENOMEM;
@@ -262,12 +263,14 @@ static int __devinit pci_plx9050_fn(struct pci_dev *dev, int enable)
  * interface chip and different configuration methods:
  *     - 10x cards have control registers in IO and/or memory space;
  *     - 20x cards have control registers in standard PCI configuration space.
+ *
+ * Note: some SIIG cards are probed by the parport_serial object.
  */
 
 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
 
-static int __devinit pci_siig10x_fn(struct pci_dev *dev, int enable)
+int pci_siig10x_fn(struct pci_dev *dev, int enable)
 {
 	u16 data, *p;
 
@@ -295,10 +298,12 @@ static int __devinit pci_siig10x_fn(struct pci_dev *dev, int enable)
 	return 0;
 }
 
+EXPORT_SYMBOL(pci_siig10x_fn);
+
 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
 
-static int __devinit pci_siig20x_fn(struct pci_dev *dev, int enable)
+int pci_siig20x_fn(struct pci_dev *dev, int enable)
 {
 	u8 data;
 
@@ -318,6 +323,8 @@ static int __devinit pci_siig20x_fn(struct pci_dev *dev, int enable)
 	return 0;
 }
 
+EXPORT_SYMBOL(pci_siig20x_fn);
+
 /* Added for EKF Intel i960 serial boards */
 static int __devinit pci_inteli960ni_fn(struct pci_dev *dev, int enable)
 {

drivers/serial/Makefile

@@ -4,7 +4,7 @@
 #  $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $
 #
 
-export-objs	:= core.o 8250.o suncore.o
+export-objs	:= core.o 8250.o 8250_pci.o suncore.o
 
 serial-8250-y :=
 serial-8250-$(CONFIG_GSC) += 8250_gsc.o

drivers/serial/core.c

@@ -135,20 +135,6 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
 #define uart_set_mctrl(port,set)	uart_update_mctrl(port,set,0)
 #define uart_clear_mctrl(port,clear)	uart_update_mctrl(port,0,clear)
 
-static inline void uart_update_altspeed(struct uart_info *info)
-{
-	unsigned int flags = info->port->flags & UPF_SPD_MASK;
-
-	if (flags == UPF_SPD_HI)
-		info->tty->alt_speed = 57600;
-	if (flags == UPF_SPD_VHI)
-		info->tty->alt_speed = 115200;
-	if (flags == UPF_SPD_SHI)
-		info->tty->alt_speed = 230400;
-	if (flags == UPF_SPD_WARP)
-		info->tty->alt_speed = 460800;
-}
-
 /*
  * Startup the port.  This will be called once per open.  All calls
  * will be serialised by the global port semaphore.
@@ -167,10 +153,8 @@ static int uart_startup(struct uart_info *info, int init_hw)
 	 * once we have successfully opened the port.  Also set
 	 * up the tty->alt_speed kludge
 	 */
-	if (info->tty) {
+	if (info->tty)
 		set_bit(TTY_IO_ERROR, &info->tty->flags);
-		uart_update_altspeed(info);
-	}
 
 	if (port->type == PORT_UNKNOWN)
 		return 0;
@@ -276,43 +260,20 @@ static void uart_shutdown(struct uart_info *info)
 	info->flags &= ~UIF_INITIALIZED;
 }
 
-static inline
-unsigned int uart_calculate_quot(struct uart_info *info, unsigned int baud)
-{
-	struct uart_port *port = info->port;
-	unsigned int quot;
-
-	/* Special case: B0 rate */
-	if (baud == 0)
-		baud = 9600;
-
-	/* Old HI/VHI/custom speed handling */
-	if (baud == 38400 &&
-	    ((port->flags & UPF_SPD_MASK) == UPF_SPD_CUST))
-		quot = info->state->custom_divisor;
-	else
-		quot = port->uartclk / (16 * baud);
-
-	return quot;
-}
-
-static void
-uart_change_speed(struct uart_info *info, struct termios *old_termios)
+/**
+ *	uart_update_timeout - update per-port FIFO timeout.
+ *	@port: uart_port structure describing the port.
+ *	@cflag: termios cflag value
+ *	@quot: uart clock divisor quotient
+ *
+ *	Set the port FIFO timeout value.  The @cflag value should
+ *	reflect the actual hardware settings.
+ */
+void
+uart_update_timeout(struct uart_port *port, unsigned int cflag,
+		    unsigned int quot)
 {
-	struct uart_port *port = info->port;
-	unsigned int quot, cflag, bits, try;
-
-	/*
-	 * If we have no tty, termios, or the port does not exist,
-	 * then we can't set the parameters for this port.
-	 */
-	if (!info->tty || !info->tty->termios || port->type == PORT_UNKNOWN)
-		return;
-
-	/*
-	 * Set flags based on termios cflag
-	 */
-	cflag = info->tty->termios->c_cflag;
+	unsigned int bits;
 
 	/* byte size and parity */
 	switch (cflag & CSIZE) {
@@ -335,12 +296,105 @@ uart_change_speed(struct uart_info *info, struct termios *old_termios)
 	if (cflag & PARENB)
 		bits++;
 
+	/*
+	 * The total number of bits to be transmitted in the fifo.
+	 */
+	bits = bits * port->fifosize;
+
+	/*
+	 * Figure the timeout to send the above number of bits.
+	 * Add .02 seconds of slop
+	 */
+	port->timeout = (HZ * bits) / (port->uartclk / (16 * quot)) + HZ/50;
+}
+
+EXPORT_SYMBOL(uart_update_timeout);
+
+/**
+ *	uart_get_baud_rate - return baud rate for a particular port
+ *	@port: uart_port structure describing the port in question.
+ *	@termios: desired termios settings.
+ *
+ *	Decode the termios structure into a numeric baud rate,
+ *	taking account of the magic 38400 baud rate (with spd_*
+ *	flags), and mapping the %B0 rate to 9600 baud.
+ */
+unsigned int
+uart_get_baud_rate(struct uart_port *port, struct termios *termios)
+{
+	unsigned int baud = tty_termios_baud_rate(termios);
+
+	/*
+	 * The spd_hi, spd_vhi, spd_shi, spd_warp kludge...
+	 * Die! Die! Die!
+	 */
+	if (baud == 38400) {
+		unsigned int flags = port->flags & UPF_SPD_MASK;
+
+		if (flags == UPF_SPD_HI)
+			baud = 57600;
+		if (flags == UPF_SPD_VHI)
+			baud = 115200;
+		if (flags == UPF_SPD_SHI)
+			baud = 230400;
+		if (flags == UPF_SPD_WARP)
+			baud = 460800;
+	}
+
+	/*
+	 * Special case: B0 rate.
+	 */
+	if (baud == 0)
+		baud = 9600;
+
+	return baud;
+}
+
+EXPORT_SYMBOL(uart_get_baud_rate);
+
+static inline unsigned int
+uart_calculate_quot(struct uart_port *port, unsigned int baud)
+{
+	unsigned int quot;
+
+	/*
+	 * Old custom speed handling.
+	 */
+	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
+		quot = port->custom_divisor;
+	else
+		quot = port->uartclk / (16 * baud);
+
+	return quot;
+}
+
+/**
+ *	uart_get_divisor - return uart clock divisor
+ *	@port: uart_port structure describing the port.
+ *	@termios: desired termios settings
+ *	@old_termios: the original port settings, or NULL
+ *
+ *	Calculate the uart clock divisor for the port.  If the
+ *	divisor is invalid, try the old termios setting.  If
+ *	the divisor is still invalid, we try 9600 baud.
+ *
+ *	Update the @termios structure to reflect the baud rate
+ *	we're actually going to be using.
+ *
+ *	If 9600 baud fails, we return a zero divisor.
+ */
+unsigned int
+uart_get_divisor(struct uart_port *port, struct termios *termios,
+		 struct termios *old_termios)
+{
+	unsigned int quot, try;
+
 	for (try = 0; try < 3; try ++) {
 		unsigned int baud;
 
 		/* Determine divisor based on baud rate */
-		baud = tty_get_baud_rate(info->tty);
-		quot = uart_calculate_quot(info, baud);
+		baud = uart_get_baud_rate(port, termios);
+		quot = uart_calculate_quot(port, baud);
 		if (quot)
 			break;
 
@@ -348,10 +402,9 @@ uart_change_speed(struct uart_info *info, struct termios *old_termios)
 		 * Oops, the quotient was zero.  Try again with
 		 * the old baud rate if possible.
 		 */
-		info->tty->termios->c_cflag &= ~CBAUD;
+		termios->c_cflag &= ~CBAUD;
 		if (old_termios) {
-			info->tty->termios->c_cflag |=
-				 (old_termios->c_cflag & CBAUD);
+			termios->c_cflag |= old_termios->c_cflag & CBAUD;
 			old_termios = NULL;
 			continue;
 		}
@@ -360,30 +413,48 @@ uart_change_speed(struct uart_info *info, struct termios *old_termios)
 		 * As a last resort, if the quotient is zero,
 		 * default to 9600 bps
 		 */
-		info->tty->termios->c_cflag |= B9600;
+		termios->c_cflag |= B9600;
 	}
 
+	return quot;
+}
+
+EXPORT_SYMBOL(uart_get_divisor);
+
+static void
+uart_change_speed(struct uart_info *info, struct termios *old_termios)
+{
+	struct tty_struct *tty = info->tty;
+	struct uart_port *port = info->port;
+	struct termios *termios;
+	unsigned int quot;
+
 	/*
-	 * The total number of bits to be transmitted in the fifo.
+	 * If we have no tty, termios, or the port does not exist,
+	 * then we can't set the parameters for this port.
 	 */
-	bits = bits * port->fifosize;
+	if (!tty || !tty->termios || port->type == PORT_UNKNOWN)
+		return;
+
+	termios = tty->termios;
 
 	/*
-	 * Figure the timeout to send the above number of bits.
-	 * Add .02 seconds of slop
+	 * Set flags based on termios cflag
 	 */
-	port->timeout = (HZ * bits) / (port->uartclk / (16 * quot)) + HZ/50;
-
-	if (cflag & CRTSCTS)
+	if (termios->c_cflag & CRTSCTS)
 		info->flags |= UIF_CTS_FLOW;
 	else
 		info->flags &= ~UIF_CTS_FLOW;
-	if (cflag & CLOCAL)
+
+	if (termios->c_cflag & CLOCAL)
 		info->flags &= ~UIF_CHECK_CD;
 	else
 		info->flags |= UIF_CHECK_CD;
 
-	port->ops->change_speed(port, cflag, info->tty->termios->c_iflag, quot);
+	quot = uart_get_divisor(port, termios, old_termios);
+	uart_update_timeout(port, termios->c_cflag, quot);
+
+	port->ops->change_speed(port, termios->c_cflag, termios->c_iflag, quot);
 }
 
 static inline void
@@ -597,7 +668,7 @@ static int uart_get_info(struct uart_info *info, struct serial_struct *retinfo)
 	tmp.baud_base	    = port->uartclk / 16;
 	tmp.close_delay	    = state->close_delay;
 	tmp.closing_wait    = state->closing_wait;
-	tmp.custom_divisor  = state->custom_divisor;
+	tmp.custom_divisor  = port->custom_divisor;
 	tmp.hub6	    = port->hub6;
 	tmp.io_type         = port->iotype;
 	tmp.iomem_reg_shift = port->regshift;
@@ -652,7 +723,7 @@ uart_set_info(struct uart_info *info, struct serial_struct *newinfo)
 		      new_serial.type != port->type;
 
 	old_flags = port->flags;
-	old_custom_divisor = state->custom_divisor;
+	old_custom_divisor = port->custom_divisor;
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		retval = -EPERM;
@@ -665,7 +736,7 @@ uart_set_info(struct uart_info *info, struct serial_struct *newinfo)
 			goto exit;
 		port->flags = ((port->flags & ~UPF_USR_MASK) |
 			       (new_serial.flags & UPF_USR_MASK));
-		state->custom_divisor = new_serial.custom_divisor;
+		port->custom_divisor = new_serial.custom_divisor;
 		goto check_and_exit;
 	}
 
@@ -757,7 +828,7 @@ uart_set_info(struct uart_info *info, struct serial_struct *newinfo)
 	port->irq              = new_serial.irq;
 	port->uartclk          = new_serial.baud_base * 16;
 	port->flags            = new_serial.flags & UPF_FLAGS;
-	state->custom_divisor  = new_serial.custom_divisor;
+	port->custom_divisor   = new_serial.custom_divisor;
 	state->close_delay     = new_serial.close_delay * HZ / 100;
 	state->closing_wait    = new_serial.closing_wait * HZ / 100;
 	port->fifosize         = new_serial.xmit_fifo_size;
@@ -769,10 +840,8 @@ uart_set_info(struct uart_info *info, struct serial_struct *newinfo)
 		goto exit;
 	if (info->flags & UIF_INITIALIZED) {
 		if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
-		    old_custom_divisor != state->custom_divisor) {
-			uart_update_altspeed(info);
+		    old_custom_divisor != port->custom_divisor)
 			uart_change_speed(info, NULL);
-		}
 	} else
 		retval = uart_startup(info, 1);
  exit:
@@ -1540,8 +1609,9 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	 * Any failures from here onwards should not touch the count.
 	 */
 	tty->driver_data = info;
+	tty->low_latency = (info->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+	tty->alt_speed = 0;
 	info->tty = tty;
-	info->tty->low_latency = (info->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
 
 	/*
 	 * If the port is in the middle of closing, bail out now.
@@ -2009,7 +2079,7 @@ __uart_register_port(struct uart_driver *drv, struct uart_state *state,
 	/*
 	 * If there isn't a port here, don't do anything further.
 	 */
-	if (!port->iobase && !port->mapbase)
+	if (!port->iobase && !port->mapbase && !port->membase)
 		return;
 
 	/*
@@ -2405,17 +2475,23 @@ int uart_register_port(struct uart_driver *drv, struct uart_port *port)
 			goto out;
 		}
 
-		state->port->iobase   = port->iobase;
-		state->port->membase  = port->membase;
-		state->port->irq      = port->irq;
-		state->port->uartclk  = port->uartclk;
-		state->port->fifosize = port->fifosize;
-		state->port->regshift = port->regshift;
-		state->port->iotype   = port->iotype;
-		state->port->flags    = port->flags;
-		state->port->line     = state - drv->state;
-
-		__uart_register_port(drv, state, state->port);
+		/*
+		 * If the port is already initialised, don't touch it.
+		 */
+		if (state->port->type == PORT_UNKNOWN) {
+			state->port->iobase   = port->iobase;
+			state->port->membase  = port->membase;
+			state->port->irq      = port->irq;
+			state->port->uartclk  = port->uartclk;
+			state->port->fifosize = port->fifosize;
+			state->port->regshift = port->regshift;
+			state->port->iotype   = port->iotype;
+			state->port->flags    = port->flags;
+			state->port->line     = state - drv->state;
+			state->port->mapbase  = port->mapbase;
+
+			__uart_register_port(drv, state, state->port);
+		}
 
 		ret = state->port->line;
 	} else

include/linux/serial.h

@@ -48,6 +48,7 @@ struct serial_struct {
 	unsigned char	*iomem_base;
 	unsigned short	iomem_reg_shift;
 	unsigned int	port_high;
+	unsigned long	iomap_base;	/* cookie passed into ioremap */
 	int	reserved[1];
 };
 

include/linux/serial_core.h

@@ -186,6 +186,7 @@ struct uart_port {
 	unsigned int		timeout;		/* character-based timeout */
 	unsigned int		type;			/* port type */
 	struct uart_ops		*ops;
+	unsigned int		custom_divisor;
 	unsigned int		line;			/* port index */
 	unsigned long		mapbase;		/* for ioremap */
 	unsigned char		hub6;			/* this should be in the 8250 driver */
@@ -204,8 +205,6 @@ struct uart_state {
 #define USF_CLOSING_WAIT_INF	(0)
 #define USF_CLOSING_WAIT_NONE	(65535)
 
-	unsigned int		custom_divisor;
-
 	int			count;
 	struct uart_info	*info;
 	struct uart_port	*port;

include/linux/tty.h

@@ -397,6 +397,7 @@ extern void do_SAK(struct tty_struct *tty);
 extern void disassociate_ctty(int priv);
 extern void tty_flip_buffer_push(struct tty_struct *tty);
 extern int tty_get_baud_rate(struct tty_struct *tty);
+extern int tty_termios_baud_rate(struct termios *termios);
 
 /* n_tty.c */
 extern struct tty_ldisc tty_ldisc_N_TTY;

kernel/ksyms.c

@@ -353,13 +353,8 @@ EXPORT_SYMBOL(generic_file_writev);
 EXPORT_SYMBOL(iov_shorten);
 
 /* tty routines */
-EXPORT_SYMBOL(tty_hangup);
 EXPORT_SYMBOL(tty_wait_until_sent);
-EXPORT_SYMBOL(tty_check_change);
-EXPORT_SYMBOL(tty_hung_up_p);
 EXPORT_SYMBOL(tty_flip_buffer_push);
-EXPORT_SYMBOL(tty_get_baud_rate);
-EXPORT_SYMBOL(do_SAK);
 
 /* filesystem registration */
 EXPORT_SYMBOL(register_filesystem);