Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (48 commits)
  MIPS: Move arch_get_unmapped_area and gang to new file.
  MIPS: Cleanup arch_get_unmapped_area
  MIPS: Octeon: Don't request interrupts for unused IPI mailbox bits.
  Octeon: Fix interrupt irq settings for performance counters.
  MIPS: Fix build warnings on defconfigs
  MIPS: Lemote 2F, Malta: Fix build warning
  MIPS: Set ELF AT_PLATFORM string for Loongson2 processors
  MIPS: Set ELF AT_PLATFORM string for BMIPS processors
  MIPS: Introduce set_elf_platform() helper function
  MIPS: JZ4740: setup: Autodetect physical memory.
  MIPS: BCM47xx: Fix MAC address parsing.
  MIPS: BCM47xx: Extend the filling of SPROM from NVRAM
  MIPS: BCM47xx: Register SSB fallback sprom callback
  MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.
  SSB: Change fallback sprom to callback mechanism.
  MIPS: Alchemy: Clean up GPIO registers and accessors
  MIPS: Alchemy: Cleanup DMA addresses
  MIPS: Alchemy: Rewrite ethernet platform setup
  MIPS: Alchemy: Rewrite UART setup and constants.
  MIPS: Alchemy: Convert dbdma.c to syscore_ops
  ...

arch/mips/Kbuild.platforms

@@ -11,6 +11,7 @@ platforms += dec
 platforms += emma
 platforms += jazz
 platforms += jz4740
+platforms += lantiq
 platforms += lasat
 platforms += loongson
 platforms += mipssim

arch/mips/Kconfig

@@ -212,6 +212,24 @@ config MACH_JZ4740
 	select HAVE_PWM
 	select HAVE_CLK
 
+config LANTIQ
+	bool "Lantiq based platforms"
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_HAS_EARLY_PRINTK
+	select ARCH_REQUIRE_GPIOLIB
+	select SWAP_IO_SPACE
+	select BOOT_RAW
+	select HAVE_CLK
+	select MIPS_MACHINE
+
 config LASAT
 	bool "LASAT Networks platforms"
 	select CEVT_R4K
@@ -736,6 +754,33 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 		Hikari
 	  Say Y here for most Octeon reference boards.
 
+config NLM_XLR_BOARD
+	bool "Netlogic XLR/XLS based systems"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select NLM_COMMON
+	select NLM_XLR
+	select SYS_HAS_CPU_XLR
+	select SYS_SUPPORTS_SMP
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select 64BIT_PHYS_ADDR
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select DMA_COHERENT
+	select NR_CPUS_DEFAULT_32
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select ZONE_DMA if 64BIT
+	select SYNC_R4K
+	select SYS_HAS_EARLY_PRINTK
+	help
+	  Support for systems based on Netlogic XLR and XLS processors.
+	  Say Y here if you have a XLR or XLS based board.
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -743,6 +788,7 @@ source "arch/mips/ath79/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
+source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/powertv/Kconfig"
@@ -752,6 +798,7 @@ source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/cavium-octeon/Kconfig"
 source "arch/mips/loongson/Kconfig"
+source "arch/mips/netlogic/Kconfig"
 
 endmenu
 
@@ -1420,6 +1467,17 @@ config CPU_BMIPS5000
 	help
 	  Broadcom BMIPS5000 processors.
 
+config CPU_XLR
+	bool "Netlogic XLR SoC"
+	depends on SYS_HAS_CPU_XLR
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	select CPU_SUPPORTS_HUGEPAGES
+	help
+	  Netlogic Microsystems XLR/XLS processors.
 endchoice
 
 if CPU_LOONGSON2F
@@ -1550,6 +1608,9 @@ config SYS_HAS_CPU_BMIPS4380
 config SYS_HAS_CPU_BMIPS5000
 	bool
 
+config SYS_HAS_CPU_XLR
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC

arch/mips/Makefile

@@ -191,6 +191,18 @@ endif
 #
 include $(srctree)/arch/mips/Kbuild.platforms
 
+#
+# NETLOGIC SOC Common (common)
+#
+cflags-$(CONFIG_NLM_COMMON)		+= -I$(srctree)/arch/mips/include/asm/mach-netlogic
+cflags-$(CONFIG_NLM_COMMON)		+= -I$(srctree)/arch/mips/include/asm/netlogic
+
+#
+# NETLOGIC XLR/XLS SoC, Simulator and boards
+#
+core-$(CONFIG_NLM_XLR)      		+= arch/mips/netlogic/xlr/
+load-$(CONFIG_NLM_XLR_BOARD)		+= 0xffffffff84000000
+
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 

arch/mips/alchemy/common/dbdma.c

@@ -36,7 +36,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 
@@ -58,7 +58,8 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
 /* I couldn't find a macro that did this... */
 #define ALIGN_ADDR(x, a)	((((u32)(x)) + (a-1)) & ~(a-1))
 
-static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static dbdma_global_t *dbdma_gptr =
+			(dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
 static int dbdma_initialized;
 
 static dbdev_tab_t dbdev_tab[] = {
@@ -299,7 +300,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	if (ctp != NULL) {
 		memset(ctp, 0, sizeof(chan_tab_t));
 		ctp->chan_index = chan = i;
-		dcp = DDMA_CHANNEL_BASE;
+		dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
 		dcp += (0x0100 * chan);
 		ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
 		cp = (au1x_dma_chan_t *)dcp;
@@ -958,105 +959,75 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 }
 
 
-struct alchemy_dbdma_sysdev {
-	struct sys_device sysdev;
-	u32 pm_regs[NUM_DBDMA_CHANS + 1][6];
-};
+static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
 
-static int alchemy_dbdma_suspend(struct sys_device *dev,
-				 pm_message_t state)
+static int alchemy_dbdma_suspend(void)
 {
-	struct alchemy_dbdma_sysdev *sdev =
-		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
-	u32 addr;
+	void __iomem *addr;
 
-	addr = DDMA_GLOBAL_BASE;
-	sdev->pm_regs[0][0] = au_readl(addr + 0x00);
-	sdev->pm_regs[0][1] = au_readl(addr + 0x04);
-	sdev->pm_regs[0][2] = au_readl(addr + 0x08);
-	sdev->pm_regs[0][3] = au_readl(addr + 0x0c);
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
+	alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
+	alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
+	alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
 
 	/* save channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		sdev->pm_regs[i][0] = au_readl(addr + 0x00);
-		sdev->pm_regs[i][1] = au_readl(addr + 0x04);
-		sdev->pm_regs[i][2] = au_readl(addr + 0x08);
-		sdev->pm_regs[i][3] = au_readl(addr + 0x0c);
-		sdev->pm_regs[i][4] = au_readl(addr + 0x10);
-		sdev->pm_regs[i][5] = au_readl(addr + 0x14);
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+	for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+		alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
+		alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
+		alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
+		alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
+		alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
+		alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
 
 		/* halt channel */
-		au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00);
-		au_sync();
-		while (!(au_readl(addr + 0x14) & 1))
-			au_sync();
+		__raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
+		wmb();
+		while (!(__raw_readl(addr + 0x14) & 1))
+			wmb();
 
 		addr += 0x100;	/* next channel base */
 	}
 	/* disable channel interrupts */
-	au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
-	au_sync();
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	__raw_writel(0, addr + 0x0c);
+	wmb();
 
 	return 0;
 }
 
-static int alchemy_dbdma_resume(struct sys_device *dev)
+static void alchemy_dbdma_resume(void)
 {
-	struct alchemy_dbdma_sysdev *sdev =
-		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
-	u32 addr;
+	void __iomem *addr;
 
-	addr = DDMA_GLOBAL_BASE;
-	au_writel(sdev->pm_regs[0][0], addr + 0x00);
-	au_writel(sdev->pm_regs[0][1], addr + 0x04);
-	au_writel(sdev->pm_regs[0][2], addr + 0x08);
-	au_writel(sdev->pm_regs[0][3], addr + 0x0c);
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	__raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
+	__raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
+	__raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
+	__raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
 
 	/* restore channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		au_writel(sdev->pm_regs[i][0], addr + 0x00);
-		au_writel(sdev->pm_regs[i][1], addr + 0x04);
-		au_writel(sdev->pm_regs[i][2], addr + 0x08);
-		au_writel(sdev->pm_regs[i][3], addr + 0x0c);
-		au_writel(sdev->pm_regs[i][4], addr + 0x10);
-		au_writel(sdev->pm_regs[i][5], addr + 0x14);
-		au_sync();
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+	for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+		__raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
+		__raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
+		__raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
+		__raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
+		__raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
+		__raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
+		wmb();
 		addr += 0x100;	/* next channel base */
 	}
-
-	return 0;
 }
 
-static struct sysdev_class alchemy_dbdma_sysdev_class = {
-	.name		= "dbdma",
+static struct syscore_ops alchemy_dbdma_syscore_ops = {
 	.suspend	= alchemy_dbdma_suspend,
 	.resume		= alchemy_dbdma_resume,
 };
 
-static int __init alchemy_dbdma_sysdev_init(void)
-{
-	struct alchemy_dbdma_sysdev *sdev;
-	int ret;
-
-	ret = sysdev_class_register(&alchemy_dbdma_sysdev_class);
-	if (ret)
-		return ret;
-
-	sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL);
-	if (!sdev)
-		return -ENOMEM;
-
-	sdev->sysdev.id = -1;
-	sdev->sysdev.cls = &alchemy_dbdma_sysdev_class;
-	ret = sysdev_register(&sdev->sysdev);
-	if (ret)
-		kfree(sdev);
-
-	return ret;
-}
-
 static int __init au1xxx_dbdma_init(void)
 {
 	int irq_nr, ret;
@@ -1084,11 +1055,7 @@ static int __init au1xxx_dbdma_init(void)
 	else {
 		dbdma_initialized = 1;
 		printk(KERN_INFO "Alchemy DBDMA initialized\n");
-		ret = alchemy_dbdma_sysdev_init();
-		if (ret) {
-			printk(KERN_ERR "DBDMA PM init failed\n");
-			ret = 0;
-		}
+		register_syscore_ops(&alchemy_dbdma_syscore_ops);
 	}
 
 	return ret;

arch/mips/alchemy/common/dma.c

@@ -58,6 +58,9 @@
  * returned from request_dma.
  */
 
+/* DMA Channel register block spacing */
+#define DMA_CHANNEL_LEN		0x00000100
+
 DEFINE_SPINLOCK(au1000_dma_spin_lock);
 
 struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
@@ -77,22 +80,23 @@ static const struct dma_dev {
 	unsigned int fifo_addr;
 	unsigned int dma_mode;
 } dma_dev_table[DMA_NUM_DEV] = {
-	{UART0_ADDR + UART_TX, 0},
-	{UART0_ADDR + UART_RX, 0},
-	{0, 0},
-	{0, 0},
-	{AC97C_DATA, DMA_DW16 },          /* coherent */
-	{AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */
-	{UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
-	{UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
-	{USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
-	{USBD_EP0WR, DMA_DW8 | DMA_NC},
-	{USBD_EP2WR, DMA_DW8 | DMA_NC},
-	{USBD_EP3WR, DMA_DW8 | DMA_NC},
-	{USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC},
-	{USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC},
-	{I2S_DATA, DMA_DW32 | DMA_NC},
-	{I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC}
+	{ AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 },		/* UART0_TX */
+	{ AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR },	/* UART0_RX */
+	{ 0, 0 },	/* DMA_REQ0 */
+	{ 0, 0 },	/* DMA_REQ1 */
+	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 },		/* AC97 TX c */
+	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR },	/* AC97 RX c */
+	{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC },	/* UART3_TX */
+	{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
+	{ AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+	{ AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+	{ AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+	{ AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+	{ AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+	{ AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+	/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
+	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC},	/* I2S TX */
+	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
 };
 
 int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
@@ -123,10 +127,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
 
 /* Device FIFO addresses and default DMA modes - 2nd bank */
 static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
-	{ SD0_XMIT_FIFO, DMA_DS | DMA_DW8 },		/* coherent */
-	{ SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 },	/* coherent */
-	{ SD1_XMIT_FIFO, DMA_DS | DMA_DW8 },		/* coherent */
-	{ SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }	/* coherent */
+	{ AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 },		/* coherent */
+	{ AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR },	/* coherent */
+	{ AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 },		/* coherent */
+	{ AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }	/* coherent */
 };
 
 void dump_au1000_dma_channel(unsigned int dmanr)
@@ -202,7 +206,7 @@ int request_au1000_dma(int dev_id, const char *dev_str,
 	}
 
 	/* fill it in */
-	chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
+	chan->io = KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + i * DMA_CHANNEL_LEN;
 	chan->dev_id = dev_id;
 	chan->dev_str = dev_str;
 	chan->fifo_addr = dev->fifo_addr;

arch/mips/alchemy/common/setup.c

@@ -52,8 +52,6 @@ void __init plat_mem_setup(void)
 	/* this is faster than wasting cycles trying to approximate it */
 	preset_lpj = (est_freq >> 1) / HZ;
 
-	board_setup();  /* board specific setup */
-
 	if (au1xxx_cpu_needs_config_od())
 		/* Various early Au1xx0 errata corrected by this */
 		set_c0_config(1 << 19); /* Set Config[OD] */
@@ -61,6 +59,8 @@ void __init plat_mem_setup(void)
 		/* Clear to obtain best system bus performance */
 		clear_c0_config(1 << 19); /* Clear Config[OD] */
 
+	board_setup();  /* board specific setup */
+
 	/* IO/MEM resources. */
 	set_io_port_base(0);
 	ioport_resource.start = IOPORT_RESOURCE_START;

arch/mips/alchemy/devboards/db1200/setup.c

@@ -23,6 +23,13 @@ void __init board_setup(void)
 	unsigned long freq0, clksrc, div, pfc;
 	unsigned short whoami;
 
+	/* Set Config[OD] (disable overlapping bus transaction):
+	 * This gets rid of a _lot_ of spurious interrupts (especially
+	 * wrt. IDE); but incurs ~10% performance hit in some
+	 * cpu-bound applications.
+	 */
+	set_c0_config(1 << 19);
+
 	bcsr_init(DB1200_BCSR_PHYS_ADDR,
 		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
 

arch/mips/alchemy/devboards/pb1000/board_setup.c

@@ -65,7 +65,7 @@ void __init board_setup(void)
 
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
-	au_writel(0, SYS_PINSTATERD);
+	alchemy_gpio1_input_enable();
 	udelay(100);
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)

arch/mips/alchemy/devboards/pb1500/board_setup.c

@@ -56,7 +56,7 @@ void __init board_setup(void)
 	sys_clksrc = sys_freqctrl = pin_func = 0;
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
-	au_writel(0, SYS_PINSTATERD);
+	alchemy_gpio1_input_enable();
 	udelay(100);
 
 	/* GPIO201 is input for PCMCIA card detect */

arch/mips/alchemy/devboards/prom.c

@@ -62,5 +62,5 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
-    alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/alchemy/gpr/board_setup.c

@@ -36,9 +36,6 @@
 
 #include <prom.h>
 
-#define UART1_ADDR	KSEG1ADDR(UART1_PHYS_ADDR)
-#define UART3_ADDR	KSEG1ADDR(UART3_PHYS_ADDR)
-
 char irq_tab_alchemy[][5] __initdata = {
 	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
 };
@@ -67,18 +64,15 @@ static void gpr_power_off(void)
 
 void __init board_setup(void)
 {
-	printk(KERN_INFO "Tarpeze ITS GPR board\n");
+	printk(KERN_INFO "Trapeze ITS GPR board\n");
 
 	pm_power_off = gpr_power_off;
 	_machine_halt = gpr_power_off;
 	_machine_restart = gpr_reset;
 
-	/* Enable UART3 */
-	au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */
-	au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
-	/* Enable UART1 */
-	au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
-	au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
+	/* Enable UART1/3 */
+	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+	alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
 
 	/* Take away Reset of UMTS-card */
 	alchemy_gpio_direction_output(215, 1);

arch/mips/alchemy/gpr/init.c

@@ -59,5 +59,5 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
-	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/alchemy/mtx-1/board_setup.c

@@ -87,7 +87,7 @@ void __init board_setup(void)
 	au_writel(SYS_PF_NI2, SYS_PINFUNC);
 
 	/* Initialize GPIO */
-	au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+	au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
 	alchemy_gpio_direction_output(0, 0);	/* Disable M66EN (PCI 66MHz) */
 	alchemy_gpio_direction_output(3, 1);	/* Disable PCI CLKRUN# */
 	alchemy_gpio_direction_output(1, 1);	/* Enable EXT_IO3 */

arch/mips/alchemy/mtx-1/init.c

@@ -62,5 +62,5 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
-	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/alchemy/mtx-1/platform.c

@@ -53,8 +53,8 @@ static struct platform_device mtx1_button = {
 
 static struct resource mtx1_wdt_res[] = {
 	[0] = {
-		.start	= 15,
-		.end	= 15,
+		.start	= 215,
+		.end	= 215,
 		.name	= "mtx1-wdt-gpio",
 		.flags	= IORESOURCE_IRQ,
 	}

arch/mips/alchemy/xxs1500/board_setup.c

@@ -66,13 +66,10 @@ void __init board_setup(void)
 	au_writel(pin_func, SYS_PINFUNC);
 
 	/* Enable UART */
-	au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
-	mdelay(10);
-	au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
-	mdelay(10);
-
-	/* Enable DTR = USB power up */
-	au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
+	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+	/* Enable DTR (MCR bit 0) = USB power up */
+	__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
+	wmb();
 
 #ifdef CONFIG_PCI
 #if defined(__MIPSEB__)

arch/mips/alchemy/xxs1500/init.c

@@ -59,5 +59,5 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
-	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/bcm47xx/nvram.c

@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2005 Broadcom Corporation
  * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -23,7 +24,7 @@
 static char nvram_buf[NVRAM_SPACE];
 
 /* Probe for NVRAM header */
-static void __init early_nvram_init(void)
+static void early_nvram_init(void)
 {
 	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
 	struct nvram_header *header;

arch/mips/bcm47xx/setup.c

@@ -3,6 +3,7 @@
  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
  *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
  *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
+ *  Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -57,10 +58,49 @@ static void bcm47xx_machine_halt(void)
 }
 
 #define READ_FROM_NVRAM(_outvar, name, buf) \
-	if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+	if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\
 		sprom->_outvar = simple_strtoul(buf, NULL, 0);
 
-static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+#define READ_FROM_NVRAM2(_outvar, name1, name2, buf) \
+	if (nvram_getprefix(prefix, name1, buf, sizeof(buf)) >= 0 || \
+	    nvram_getprefix(prefix, name2, buf, sizeof(buf)) >= 0)\
+		sprom->_outvar = simple_strtoul(buf, NULL, 0);
+
+static inline int nvram_getprefix(const char *prefix, char *name,
+				  char *buf, int len)
+{
+	if (prefix) {
+		char key[100];
+
+		snprintf(key, sizeof(key), "%s%s", prefix, name);
+		return nvram_getenv(key, buf, len);
+	}
+
+	return nvram_getenv(name, buf, len);
+}
+
+static u32 nvram_getu32(const char *name, char *buf, int len)
+{
+	int rv;
+	char key[100];
+	u16 var0, var1;
+
+	snprintf(key, sizeof(key), "%s0", name);
+	rv = nvram_getenv(key, buf, len);
+	/* return 0 here so this looks like unset */
+	if (rv < 0)
+		return 0;
+	var0 = simple_strtoul(buf, NULL, 0);
+
+	snprintf(key, sizeof(key), "%s1", name);
+	rv = nvram_getenv(key, buf, len);
+	if (rv < 0)
+		return 0;
+	var1 = simple_strtoul(buf, NULL, 0);
+	return var1 << 16 | var0;
+}
+
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix)
 {
 	char buf[100];
 	u32 boardflags;
@@ -69,11 +109,12 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
 
 	sprom->revision = 1; /* Fallback: Old hardware does not define this. */
 	READ_FROM_NVRAM(revision, "sromrev", buf);
-	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+	if (nvram_getprefix(prefix, "il0macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getprefix(prefix, "macaddr", buf, sizeof(buf)) >= 0)
 		nvram_parse_macaddr(buf, sprom->il0mac);
-	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+	if (nvram_getprefix(prefix, "et0macaddr", buf, sizeof(buf)) >= 0)
 		nvram_parse_macaddr(buf, sprom->et0mac);
-	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+	if (nvram_getprefix(prefix, "et1macaddr", buf, sizeof(buf)) >= 0)
 		nvram_parse_macaddr(buf, sprom->et1mac);
 	READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
 	READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
@@ -95,20 +136,36 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
 	READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
 	READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
 	READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
-	READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
-	READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
-	READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
-	READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
-	READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
-	READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
-	READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
-	READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
-	READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
-	READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
+	READ_FROM_NVRAM2(gpio0, "ledbh0", "wl0gpio0", buf);
+	READ_FROM_NVRAM2(gpio1, "ledbh1", "wl0gpio1", buf);
+	READ_FROM_NVRAM2(gpio2, "ledbh2", "wl0gpio2", buf);
+	READ_FROM_NVRAM2(gpio3, "ledbh3", "wl0gpio3", buf);
+	READ_FROM_NVRAM2(maxpwr_bg, "maxp2ga0", "pa0maxpwr", buf);
+	READ_FROM_NVRAM2(maxpwr_al, "maxp5gla0", "pa1lomaxpwr", buf);
+	READ_FROM_NVRAM2(maxpwr_a, "maxp5ga0", "pa1maxpwr", buf);
+	READ_FROM_NVRAM2(maxpwr_ah, "maxp5gha0", "pa1himaxpwr", buf);
+	READ_FROM_NVRAM2(itssi_bg, "itt5ga0", "pa0itssit", buf);
+	READ_FROM_NVRAM2(itssi_a, "itt2ga0", "pa1itssit", buf);
 	READ_FROM_NVRAM(tri2g, "tri2g", buf);
 	READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
 	READ_FROM_NVRAM(tri5g, "tri5g", buf);
 	READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
+	READ_FROM_NVRAM(txpid2g[0], "txpid2ga0", buf);
+	READ_FROM_NVRAM(txpid2g[1], "txpid2ga1", buf);
+	READ_FROM_NVRAM(txpid2g[2], "txpid2ga2", buf);
+	READ_FROM_NVRAM(txpid2g[3], "txpid2ga3", buf);
+	READ_FROM_NVRAM(txpid5g[0], "txpid5ga0", buf);
+	READ_FROM_NVRAM(txpid5g[1], "txpid5ga1", buf);
+	READ_FROM_NVRAM(txpid5g[2], "txpid5ga2", buf);
+	READ_FROM_NVRAM(txpid5g[3], "txpid5ga3", buf);
+	READ_FROM_NVRAM(txpid5gl[0], "txpid5gla0", buf);
+	READ_FROM_NVRAM(txpid5gl[1], "txpid5gla1", buf);
+	READ_FROM_NVRAM(txpid5gl[2], "txpid5gla2", buf);
+	READ_FROM_NVRAM(txpid5gl[3], "txpid5gla3", buf);
+	READ_FROM_NVRAM(txpid5gh[0], "txpid5gha0", buf);
+	READ_FROM_NVRAM(txpid5gh[1], "txpid5gha1", buf);
+	READ_FROM_NVRAM(txpid5gh[2], "txpid5gha2", buf);
+	READ_FROM_NVRAM(txpid5gh[3], "txpid5gha3", buf);
 	READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
 	READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
 	READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
@@ -120,19 +177,27 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
 	READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
 	READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
 	READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
-	READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
-	READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
-	READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
-	READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
 
-	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+	sprom->ofdm2gpo = nvram_getu32("ofdm2gpo", buf, sizeof(buf));
+	sprom->ofdm5glpo = nvram_getu32("ofdm5glpo", buf, sizeof(buf));
+	sprom->ofdm5gpo = nvram_getu32("ofdm5gpo", buf, sizeof(buf));
+	sprom->ofdm5ghpo = nvram_getu32("ofdm5ghpo", buf, sizeof(buf));
+
+	READ_FROM_NVRAM(antenna_gain.ghz24.a0, "ag0", buf);
+	READ_FROM_NVRAM(antenna_gain.ghz24.a1, "ag1", buf);
+	READ_FROM_NVRAM(antenna_gain.ghz24.a2, "ag2", buf);
+	READ_FROM_NVRAM(antenna_gain.ghz24.a3, "ag3", buf);
+	memcpy(&sprom->antenna_gain.ghz5, &sprom->antenna_gain.ghz24,
+	       sizeof(sprom->antenna_gain.ghz5));
+
+	if (nvram_getprefix(prefix, "boardflags", buf, sizeof(buf)) >= 0) {
 		boardflags = simple_strtoul(buf, NULL, 0);
 		if (boardflags) {
 			sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
 			sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
 		}
 	}
-	if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+	if (nvram_getprefix(prefix, "boardflags2", buf, sizeof(buf)) >= 0) {
 		boardflags = simple_strtoul(buf, NULL, 0);
 		if (boardflags) {
 			sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
@@ -141,6 +206,22 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
 	}
 }
 
+int bcm47xx_get_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+	char prefix[10];
+
+	if (bus->bustype == SSB_BUSTYPE_PCI) {
+		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+			 bus->host_pci->bus->number + 1,
+			 PCI_SLOT(bus->host_pci->devfn));
+		bcm47xx_fill_sprom(out, prefix);
+		return 0;
+	} else {
+		printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n");
+		return -EINVAL;
+	}
+}
+
 static int bcm47xx_get_invariants(struct ssb_bus *bus,
 				   struct ssb_init_invariants *iv)
 {
@@ -158,7 +239,7 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
 
-	bcm47xx_fill_sprom(&iv->sprom);
+	bcm47xx_fill_sprom(&iv->sprom, NULL);
 
 	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
 		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
@@ -172,6 +253,11 @@ void __init plat_mem_setup(void)
 	char buf[100];
 	struct ssb_mipscore *mcore;
 
+	err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom);
+	if (err)
+		printk(KERN_WARNING "bcm47xx: someone else already registered"
+			" a ssb SPROM callback handler (err %d)\n", err);
+
 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
 				      bcm47xx_get_invariants);
 	if (err)

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -643,6 +643,17 @@ static struct ssb_sprom bcm63xx_sprom = {
 	.boardflags_lo		= 0x2848,
 	.boardflags_hi		= 0x0000,
 };
+
+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+	if (bus->bustype == SSB_BUSTYPE_PCI) {
+		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+		return 0;
+	} else {
+		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+		return -EINVAL;
+	}
+}
 #endif
 
 /*
@@ -793,8 +804,9 @@ void __init board_prom_init(void)
 	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
 		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-		if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
-			printk(KERN_ERR "failed to register fallback SPROM\n");
+		if (ssb_arch_register_fallback_sprom(
+				&bcm63xx_get_fallback_sprom) < 0)
+			printk(KERN_ERR PFX "failed to register fallback SPROM\n");
 	}
 #endif
 }

arch/mips/boot/compressed/uart-alchemy.c

@@ -3,5 +3,5 @@
 void putc(char c)
 {
 	/* all current (Jan. 2010) in-kernel boards */
-	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/cavium-octeon/setup.c

@@ -288,7 +288,6 @@ void octeon_user_io_init(void)
 	union octeon_cvmemctl cvmmemctl;
 	union cvmx_iob_fau_timeout fau_timeout;
 	union cvmx_pow_nw_tim nm_tim;
-	uint64_t cvmctl;
 
 	/* Get the current settings for CP0_CVMMEMCTL_REG */
 	cvmmemctl.u64 = read_c0_cvmmemctl();
@@ -392,12 +391,6 @@ void octeon_user_io_init(void)
 			  CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE,
 			  CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128);
 
-	/* Move the performance counter interrupts to IRQ 6 */
-	cvmctl = read_c0_cvmctl();
-	cvmctl &= ~(7 << 7);
-	cvmctl |= 6 << 7;
-	write_c0_cvmctl(cvmctl);
-
 	/* Set a default for the hardware timeouts */
 	fau_timeout.u64 = 0;
 	fau_timeout.s.tout_val = 0xfff;

arch/mips/cavium-octeon/smp.c

@@ -37,7 +37,7 @@ static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
 	uint64_t action;
 
 	/* Load the mailbox register to figure out what we're supposed to do */
-	action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid));
+	action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid)) & 0xffff;
 
 	/* Clear the mailbox to clear the interrupt */
 	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action);
@@ -200,16 +200,15 @@ void octeon_prepare_cpus(unsigned int max_cpus)
 	if (labi->labi_signature != LABI_SIGNATURE)
 		panic("The bootloader version on this board is incorrect.");
 #endif
-
-	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
+	/*
+	 * Only the low order mailbox bits are used for IPIs, leave
+	 * the other bits alone.
+	 */
+	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
 	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
-			"mailbox0", mailbox_interrupt)) {
+			"SMP-IPI", mailbox_interrupt)) {
 		panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
 	}
-	if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED,
-			"mailbox1", mailbox_interrupt)) {
-		panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
-	}
 }
 
 /**

arch/mips/configs/lemote2f_defconfig

@@ -86,8 +86,8 @@ CONFIG_NET_SCHED=y
 CONFIG_NET_EMATCH=y
 CONFIG_NET_CLS_ACT=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
@@ -329,7 +329,7 @@ CONFIG_USB_LED=m
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_M66592=y
 CONFIG_MMC=m
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
 CONFIG_STAGING=y
 # CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_FB_SM7XX=y

arch/mips/configs/malta_defconfig

@@ -374,7 +374,7 @@ CONFIG_FB_CIRRUS=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_HID=m
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m

arch/mips/configs/mtx1_defconfig

@@ -225,8 +225,8 @@ CONFIG_TOSHIBA_FIR=m
 CONFIG_VLSI_FIR=m
 CONFIG_MCS_FIR=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m

arch/mips/include/asm/cpu.h

@@ -33,6 +33,7 @@
 #define PRID_COMP_TOSHIBA	0x070000
 #define PRID_COMP_LSI		0x080000
 #define PRID_COMP_LEXRA		0x0b0000
+#define PRID_COMP_NETLOGIC	0x0c0000
 #define PRID_COMP_CAVIUM	0x0d0000
 #define PRID_COMP_INGENIC	0xd00000
 
@@ -141,6 +142,31 @@
 
 #define PRID_IMP_JZRISC        0x0200
 
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC
+ */
+#define PRID_IMP_NETLOGIC_XLR732	0x0000
+#define PRID_IMP_NETLOGIC_XLR716	0x0200
+#define PRID_IMP_NETLOGIC_XLR532	0x0900
+#define PRID_IMP_NETLOGIC_XLR308	0x0600
+#define PRID_IMP_NETLOGIC_XLR532C	0x0800
+#define PRID_IMP_NETLOGIC_XLR516C	0x0a00
+#define PRID_IMP_NETLOGIC_XLR508C	0x0b00
+#define PRID_IMP_NETLOGIC_XLR308C	0x0f00
+#define PRID_IMP_NETLOGIC_XLS608	0x8000
+#define PRID_IMP_NETLOGIC_XLS408	0x8800
+#define PRID_IMP_NETLOGIC_XLS404	0x8c00
+#define PRID_IMP_NETLOGIC_XLS208	0x8e00
+#define PRID_IMP_NETLOGIC_XLS204	0x8f00
+#define PRID_IMP_NETLOGIC_XLS108	0xce00
+#define PRID_IMP_NETLOGIC_XLS104	0xcf00
+#define PRID_IMP_NETLOGIC_XLS616B	0x4000
+#define PRID_IMP_NETLOGIC_XLS608B	0x4a00
+#define PRID_IMP_NETLOGIC_XLS416B	0x4400
+#define PRID_IMP_NETLOGIC_XLS412B	0x4c00
+#define PRID_IMP_NETLOGIC_XLS408B	0x4e00
+#define PRID_IMP_NETLOGIC_XLS404B	0x4f00
+
 /*
  * Definitions for 7:0 on legacy processors
  */
@@ -234,6 +260,7 @@ enum cpu_type_enum {
 	 */
 	CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
 	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
+	CPU_XLR,
 
 	CPU_LAST
 };

arch/mips/include/asm/mach-au1x00/au1000_dma.h

@@ -37,10 +37,6 @@
 
 #define NUM_AU1000_DMA_CHANNELS	8
 
-/* DMA Channel Base Addresses */
-#define DMA_CHANNEL_BASE	0xB4002000
-#define DMA_CHANNEL_LEN		0x00000100
-
 /* DMA Channel Register Offsets */
 #define DMA_MODE_SET		0x00000000
 #define DMA_MODE_READ		DMA_MODE_SET

arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h

@@ -37,14 +37,6 @@
 
 #ifndef _LANGUAGE_ASSEMBLY
 
-/*
- * The DMA base addresses.
- * The channels are every 256 bytes (0x0100) from the channel 0 base.
- * Interrupt status/enable is bits 15:0 for channels 15 to zero.
- */
-#define DDMA_GLOBAL_BASE	0xb4003000
-#define DDMA_CHANNEL_BASE	0xb4002000
-
 typedef volatile struct dbdma_global {
 	u32	ddma_config;
 	u32	ddma_intstat;

arch/mips/include/asm/mach-au1x00/gpio-au1000.h

@@ -24,6 +24,23 @@
 
 #define MAKE_IRQ(intc, off)	(AU1000_INTC##intc##_INT_BASE + (off))
 
+/* GPIO1 registers within SYS_ area */
+#define SYS_TRIOUTRD		0x100
+#define SYS_TRIOUTCLR		0x100
+#define SYS_OUTPUTRD		0x108
+#define SYS_OUTPUTSET		0x108
+#define SYS_OUTPUTCLR		0x10C
+#define SYS_PINSTATERD		0x110
+#define SYS_PININPUTEN		0x110
+
+/* register offsets within GPIO2 block */
+#define GPIO2_DIR		0x00
+#define GPIO2_OUTPUT		0x08
+#define GPIO2_PINSTATE		0x0C
+#define GPIO2_INTENABLE		0x10
+#define GPIO2_ENABLE		0x14
+
+struct gpio;
 
 static inline int au1000_gpio1_to_irq(int gpio)
 {
@@ -200,23 +217,26 @@ static inline int au1200_irq_to_gpio(int irq)
  */
 static inline void alchemy_gpio1_set_value(int gpio, int v)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
 	unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR;
-	au_writel(mask, r);
-	au_sync();
+	__raw_writel(mask, base + r);
+	wmb();
 }
 
 static inline int alchemy_gpio1_get_value(int gpio)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
-	return au_readl(SYS_PINSTATERD) & mask;
+	return __raw_readl(base + SYS_PINSTATERD) & mask;
 }
 
 static inline int alchemy_gpio1_direction_input(int gpio)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
-	au_writel(mask, SYS_TRIOUTCLR);
-	au_sync();
+	__raw_writel(mask, base + SYS_TRIOUTCLR);
+	wmb();
 	return 0;
 }
 
@@ -257,27 +277,31 @@ static inline int alchemy_gpio1_to_irq(int gpio)
  */
 static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
 	unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
-	unsigned long d = au_readl(GPIO2_DIR);
+	unsigned long d = __raw_readl(base + GPIO2_DIR);
+
 	if (to_out)
 		d |= mask;
 	else
 		d &= ~mask;
-	au_writel(d, GPIO2_DIR);
-	au_sync();
+	__raw_writel(d, base + GPIO2_DIR);
+	wmb();
 }
 
 static inline void alchemy_gpio2_set_value(int gpio, int v)
 {
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
 	unsigned long mask;
 	mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
-	au_writel(mask, GPIO2_OUTPUT);
-	au_sync();
+	__raw_writel(mask, base + GPIO2_OUTPUT);
+	wmb();
 }
 
 static inline int alchemy_gpio2_get_value(int gpio)
 {
-	return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
 }
 
 static inline int alchemy_gpio2_direction_input(int gpio)
@@ -329,21 +353,23 @@ static inline int alchemy_gpio2_to_irq(int gpio)
  */
 static inline void alchemy_gpio1_input_enable(void)
 {
-	au_writel(0, SYS_PININPUTEN);	/* the write op is key */
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+	__raw_writel(0, base + SYS_PININPUTEN);	/* the write op is key */
+	wmb();
 }
 
 /* GPIO2 shared interrupts and control */
 
 static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
 {
-	unsigned long r = au_readl(GPIO2_INTENABLE);
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	unsigned long r = __raw_readl(base + GPIO2_INTENABLE);
 	if (en)
 		r |= 1 << gpio2;
 	else
 		r &= ~(1 << gpio2);
-	au_writel(r, GPIO2_INTENABLE);
-	au_sync();
+	__raw_writel(r, base + GPIO2_INTENABLE);
+	wmb();
 }
 
 /**
@@ -418,10 +444,11 @@ static inline void alchemy_gpio2_disable_int(int gpio2)
  */
 static inline void alchemy_gpio2_enable(void)
 {
-	au_writel(3, GPIO2_ENABLE);	/* reset, clock enabled */
-	au_sync();
-	au_writel(1, GPIO2_ENABLE);	/* clock enabled */
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(3, base + GPIO2_ENABLE);	/* reset, clock enabled */
+	wmb();
+	__raw_writel(1, base + GPIO2_ENABLE);	/* clock enabled */
+	wmb();
 }
 
 /**
@@ -431,8 +458,9 @@ static inline void alchemy_gpio2_enable(void)
  */
 static inline void alchemy_gpio2_disable(void)
 {
-	au_writel(2, GPIO2_ENABLE);	/* reset, clock disabled */
-	au_sync();
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+	__raw_writel(2, base + GPIO2_ENABLE);	/* reset, clock disabled */
+	wmb();
 }
 
 /**********************************************************************/
@@ -556,6 +584,16 @@ static inline void gpio_set_value(int gpio, int v)
 	alchemy_gpio_set_value(gpio, v);
 }
 
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+	return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+}
+
 static inline int gpio_is_valid(int gpio)
 {
 	return alchemy_gpio_is_valid(gpio);
@@ -581,10 +619,50 @@ static inline int gpio_request(unsigned gpio, const char *label)
 	return 0;
 }
 
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
 static inline void gpio_free(unsigned gpio)
 {
 }
 
+static inline void gpio_free_array(struct gpio *array, size_t num)
+{
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+				   unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+
 #endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
 
 

arch/mips/include/asm/mach-bcm47xx/nvram.h

@@ -39,8 +39,16 @@ extern int nvram_getenv(char *name, char *val, size_t val_len);
 
 static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
 {
-	sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
-	       &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+	if (strchr(buf, ':'))
+		sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
+			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+			&macaddr[5]);
+	else if (strchr(buf, '-'))
+		sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
+			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+			&macaddr[5]);
+	else
+		printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
 }
 
 #endif

arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h

@@ -63,6 +63,11 @@
 	# CN30XX Disable instruction prefetching
 	or  v0, v0, 0x2000
 skip:
+	# First clear off CvmCtl[IPPCI] bit and move the performance
+	# counters interrupt to IRQ 6
+	li	v1, ~(7 << 7)
+	and	v0, v0, v1
+	ori	v0, v0, (6 << 7)
 	# Write the cavium control register
 	dmtc0   v0, CP0_CVMCTL_REG
 	sync

arch/mips/include/asm/mach-lantiq/lantiq.h

+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _LANTIQ_H__
+#define _LANTIQ_H__
+
+#include <linux/irq.h>
+
+/* generic reg access functions */
+#define ltq_r32(reg)		__raw_readl(reg)
+#define ltq_w32(val, reg)	__raw_writel(val, reg)
+#define ltq_w32_mask(clear, set, reg)	\
+	ltq_w32((ltq_r32(reg) & ~(clear)) | (set), reg)
+#define ltq_r8(reg)		__raw_readb(reg)
+#define ltq_w8(val, reg)	__raw_writeb(val, reg)
+
+/* register access macros for EBU and CGU */
+#define ltq_ebu_w32(x, y)	ltq_w32((x), ltq_ebu_membase + (y))
+#define ltq_ebu_r32(x)		ltq_r32(ltq_ebu_membase + (x))
+#define ltq_cgu_w32(x, y)	ltq_w32((x), ltq_cgu_membase + (y))
+#define ltq_cgu_r32(x)		ltq_r32(ltq_cgu_membase + (x))
+
+extern __iomem void *ltq_ebu_membase;
+extern __iomem void *ltq_cgu_membase;
+
+extern unsigned int ltq_get_cpu_ver(void);
+extern unsigned int ltq_get_soc_type(void);
+
+/* clock speeds */
+#define CLOCK_60M	60000000
+#define CLOCK_83M	83333333
+#define CLOCK_111M	111111111
+#define CLOCK_133M	133333333
+#define CLOCK_167M	166666667
+#define CLOCK_200M	200000000
+#define CLOCK_266M	266666666
+#define CLOCK_333M	333333333
+#define CLOCK_400M	400000000
+
+/* spinlock all ebu i/o */
+extern spinlock_t ebu_lock;
+
+/* some irq helpers */
+extern void ltq_disable_irq(struct irq_data *data);
+extern void ltq_mask_and_ack_irq(struct irq_data *data);
+extern void ltq_enable_irq(struct irq_data *data);
+
+/* find out what caused the last cpu reset */
+extern int ltq_reset_cause(void);
+#define LTQ_RST_CAUSE_WDTRST	0x20
+
+#define IOPORT_RESOURCE_START	0x10000000
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xffffffff
+#define LTQ_FLASH_START		0x10000000
+#define LTQ_FLASH_MAX		0x04000000
+
+#endif

arch/mips/include/asm/mach-lantiq/lantiq_platform.h

+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_PLATFORM_H__
+#define _LANTIQ_PLATFORM_H__
+
+#include <linux/mtd/partitions.h>
+#include <linux/socket.h>
+
+/* struct used to pass info to the pci core */
+enum {
+	PCI_CLOCK_INT = 0,
+	PCI_CLOCK_EXT
+};
+
+#define PCI_EXIN0	0x0001
+#define PCI_EXIN1	0x0002
+#define PCI_EXIN2	0x0004
+#define PCI_EXIN3	0x0008
+#define PCI_EXIN4	0x0010
+#define PCI_EXIN5	0x0020
+#define PCI_EXIN_MAX	6
+
+#define PCI_GNT1	0x0040
+#define PCI_GNT2	0x0080
+#define PCI_GNT3	0x0100
+#define PCI_GNT4	0x0200
+
+#define PCI_REQ1	0x0400
+#define PCI_REQ2	0x0800
+#define PCI_REQ3	0x1000
+#define PCI_REQ4	0x2000
+#define PCI_REQ_SHIFT	10
+#define PCI_REQ_MASK	0xf
+
+struct ltq_pci_data {
+	int clock;
+	int gpio;
+	int irq[16];
+};
+
+/* struct used to pass info to network drivers */
+struct ltq_eth_data {
+	struct sockaddr mac;
+	int mii_mode;
+};
+
+#endif

arch/mips/include/asm/mach-lantiq/war.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_MIPS_MACH_LANTIQ_WAR_H
+#define __ASM_MIPS_MACH_LANTIQ_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR     0
+#define R4600_V1_HIT_CACHEOP_WAR        0
+#define R4600_V2_HIT_CACHEOP_WAR        0
+#define R5432_CP0_INTERRUPT_WAR         0
+#define BCM1250_M3_WAR                  0
+#define SIBYTE_1956_WAR                 0
+#define MIPS4K_ICACHE_REFILL_WAR        0
+#define MIPS_CACHE_SYNC_WAR             0
+#define TX49XX_ICACHE_INDEX_INV_WAR     0
+#define RM9000_CDEX_SMP_WAR             0
+#define ICACHE_REFILLS_WORKAROUND_WAR   0
+#define R10000_LLSC_WAR                 0
+#define MIPS34K_MISSED_ITLB_WAR         0
+
+#endif

arch/mips/include/asm/mach-lantiq/xway/irq.h

+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef __LANTIQ_IRQ_H
+#define __LANTIQ_IRQ_H
+
+#include <lantiq_irq.h>
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif

arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h

+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_XWAY_IRQ_H__
+#define _LANTIQ_XWAY_IRQ_H__
+
+#define INT_NUM_IRQ0		8
+#define INT_NUM_IM0_IRL0	(INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0	(INT_NUM_IRQ0 + 32)
+#define INT_NUM_IM2_IRL0	(INT_NUM_IRQ0 + 64)
+#define INT_NUM_IM3_IRL0	(INT_NUM_IRQ0 + 96)
+#define INT_NUM_IM4_IRL0	(INT_NUM_IRQ0 + 128)
+#define INT_NUM_IM_OFFSET	(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define LTQ_ASC_TIR(x)		(INT_NUM_IM3_IRL0 + (x * 8))
+#define LTQ_ASC_RIR(x)		(INT_NUM_IM3_IRL0 + (x * 8) + 1)
+#define LTQ_ASC_EIR(x)		(INT_NUM_IM3_IRL0 + (x * 8) + 2)
+
+#define LTQ_ASC_ASE_TIR		INT_NUM_IM2_IRL0
+#define LTQ_ASC_ASE_RIR		(INT_NUM_IM2_IRL0 + 2)
+#define LTQ_ASC_ASE_EIR		(INT_NUM_IM2_IRL0 + 3)
+
+#define LTQ_SSC_TIR		(INT_NUM_IM0_IRL0 + 15)
+#define LTQ_SSC_RIR		(INT_NUM_IM0_IRL0 + 14)
+#define LTQ_SSC_EIR		(INT_NUM_IM0_IRL0 + 16)
+
+#define LTQ_MEI_DYING_GASP_INT	(INT_NUM_IM1_IRL0 + 21)
+#define LTQ_MEI_INT		(INT_NUM_IM1_IRL0 + 23)
+
+#define LTQ_TIMER6_INT		(INT_NUM_IM1_IRL0 + 23)
+#define LTQ_USB_INT		(INT_NUM_IM1_IRL0 + 22)
+#define LTQ_USB_OC_INT		(INT_NUM_IM4_IRL0 + 23)
+
+#define MIPS_CPU_TIMER_IRQ		7
+
+#define LTQ_DMA_CH0_INT		(INT_NUM_IM2_IRL0)
+#define LTQ_DMA_CH1_INT		(INT_NUM_IM2_IRL0 + 1)
+#define LTQ_DMA_CH2_INT		(INT_NUM_IM2_IRL0 + 2)
+#define LTQ_DMA_CH3_INT		(INT_NUM_IM2_IRL0 + 3)
+#define LTQ_DMA_CH4_INT		(INT_NUM_IM2_IRL0 + 4)
+#define LTQ_DMA_CH5_INT		(INT_NUM_IM2_IRL0 + 5)
+#define LTQ_DMA_CH6_INT		(INT_NUM_IM2_IRL0 + 6)
+#define LTQ_DMA_CH7_INT		(INT_NUM_IM2_IRL0 + 7)
+#define LTQ_DMA_CH8_INT		(INT_NUM_IM2_IRL0 + 8)
+#define LTQ_DMA_CH9_INT		(INT_NUM_IM2_IRL0 + 9)
+#define LTQ_DMA_CH10_INT	(INT_NUM_IM2_IRL0 + 10)
+#define LTQ_DMA_CH11_INT	(INT_NUM_IM2_IRL0 + 11)
+#define LTQ_DMA_CH12_INT	(INT_NUM_IM2_IRL0 + 25)
+#define LTQ_DMA_CH13_INT	(INT_NUM_IM2_IRL0 + 26)
+#define LTQ_DMA_CH14_INT	(INT_NUM_IM2_IRL0 + 27)
+#define LTQ_DMA_CH15_INT	(INT_NUM_IM2_IRL0 + 28)
+#define LTQ_DMA_CH16_INT	(INT_NUM_IM2_IRL0 + 29)
+#define LTQ_DMA_CH17_INT	(INT_NUM_IM2_IRL0 + 30)
+#define LTQ_DMA_CH18_INT	(INT_NUM_IM2_IRL0 + 16)
+#define LTQ_DMA_CH19_INT	(INT_NUM_IM2_IRL0 + 21)
+
+#define LTQ_PPE_MBOX_INT	(INT_NUM_IM2_IRL0 + 24)
+
+#define INT_NUM_IM4_IRL14	(INT_NUM_IM4_IRL0 + 14)
+
+#endif

arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h

+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_XWAY_H__
+#define _LTQ_XWAY_H__
+
+#ifdef CONFIG_SOC_TYPE_XWAY
+
+#include <lantiq.h>
+
+/* Chip IDs */
+#define SOC_ID_DANUBE1		0x129
+#define SOC_ID_DANUBE2		0x12B
+#define SOC_ID_TWINPASS		0x12D
+#define SOC_ID_AMAZON_SE	0x152
+#define SOC_ID_ARX188		0x16C
+#define SOC_ID_ARX168		0x16D
+#define SOC_ID_ARX182		0x16F
+
+/* SoC Types */
+#define SOC_TYPE_DANUBE		0x01
+#define SOC_TYPE_TWINPASS	0x02
+#define SOC_TYPE_AR9		0x03
+#define SOC_TYPE_VR9		0x04
+#define SOC_TYPE_AMAZON_SE	0x05
+
+/* ASC0/1 - serial port */
+#define LTQ_ASC0_BASE_ADDR	0x1E100400
+#define LTQ_ASC1_BASE_ADDR	0x1E100C00
+#define LTQ_ASC_SIZE		0x400
+
+/* RCU - reset control unit */
+#define LTQ_RCU_BASE_ADDR	0x1F203000
+#define LTQ_RCU_SIZE		0x1000
+
+/* GPTU - general purpose timer unit */
+#define LTQ_GPTU_BASE_ADDR	0x18000300
+#define LTQ_GPTU_SIZE		0x100
+
+/* EBU - external bus unit */
+#define LTQ_EBU_GPIO_START	0x14000000
+#define LTQ_EBU_GPIO_SIZE	0x1000
+
+#define LTQ_EBU_BASE_ADDR	0x1E105300
+#define LTQ_EBU_SIZE		0x100
+
+#define LTQ_EBU_BUSCON0		0x0060
+#define LTQ_EBU_PCC_CON		0x0090
+#define LTQ_EBU_PCC_IEN		0x00A4
+#define LTQ_EBU_PCC_ISTAT	0x00A0
+#define LTQ_EBU_BUSCON1		0x0064
+#define LTQ_EBU_ADDRSEL1	0x0024
+#define EBU_WRDIS		0x80000000
+
+/* CGU - clock generation unit */
+#define LTQ_CGU_BASE_ADDR	0x1F103000
+#define LTQ_CGU_SIZE		0x1000
+
+/* ICU - interrupt control unit */
+#define LTQ_ICU_BASE_ADDR	0x1F880200
+#define LTQ_ICU_SIZE		0x100
+
+/* EIU - external interrupt unit */
+#define LTQ_EIU_BASE_ADDR	0x1F101000
+#define LTQ_EIU_SIZE		0x1000
+
+/* PMU - power management unit */
+#define LTQ_PMU_BASE_ADDR	0x1F102000
+#define LTQ_PMU_SIZE		0x1000
+
+#define PMU_DMA			0x0020
+#define PMU_USB			0x8041
+#define PMU_LED			0x0800
+#define PMU_GPT			0x1000
+#define PMU_PPE			0x2000
+#define PMU_FPI			0x4000
+#define PMU_SWITCH		0x10000000
+
+/* ETOP - ethernet */
+#define LTQ_ETOP_BASE_ADDR	0x1E180000
+#define LTQ_ETOP_SIZE		0x40000
+
+/* DMA */
+#define LTQ_DMA_BASE_ADDR	0x1E104100
+#define LTQ_DMA_SIZE		0x800
+
+/* PCI */
+#define PCI_CR_BASE_ADDR	0x1E105400
+#define PCI_CR_SIZE		0x400
+
+/* WDT */
+#define LTQ_WDT_BASE_ADDR	0x1F8803F0
+#define LTQ_WDT_SIZE		0x10
+
+/* STP - serial to parallel conversion unit */
+#define LTQ_STP_BASE_ADDR	0x1E100BB0
+#define LTQ_STP_SIZE		0x40
+
+/* GPIO */
+#define LTQ_GPIO0_BASE_ADDR	0x1E100B10
+#define LTQ_GPIO1_BASE_ADDR	0x1E100B40
+#define LTQ_GPIO2_BASE_ADDR	0x1E100B70
+#define LTQ_GPIO_SIZE		0x30
+
+/* SSC */
+#define LTQ_SSC_BASE_ADDR	0x1e100800
+#define LTQ_SSC_SIZE		0x100
+
+/* MEI - dsl core */
+#define LTQ_MEI_BASE_ADDR	0x1E116000
+
+/* DEU - data encryption unit */
+#define LTQ_DEU_BASE_ADDR	0x1E103100
+
+/* MPS - multi processor unit (voice) */
+#define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
+#define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
+
+/* request a non-gpio and set the PIO config */
+extern int  ltq_gpio_request(unsigned int pin, unsigned int alt0,
+	unsigned int alt1, unsigned int dir, const char *name);
+extern void ltq_pmu_enable(unsigned int module);
+extern void ltq_pmu_disable(unsigned int module);
+
+static inline int ltq_is_ar9(void)
+{
+	return (ltq_get_soc_type() == SOC_TYPE_AR9);
+}
+
+static inline int ltq_is_vr9(void)
+{
+	return (ltq_get_soc_type() == SOC_TYPE_VR9);
+}
+
+#endif /* CONFIG_SOC_TYPE_XWAY */
+#endif /* _LTQ_XWAY_H__ */

arch/mips/include/asm/mach-lantiq/xway/xway_dma.h

+/*
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License version 2 as published
+ *   by the Free Software Foundation.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef LTQ_DMA_H__
+#define LTQ_DMA_H__
+
+#define LTQ_DESC_SIZE		0x08	/* each descriptor is 64bit */
+#define LTQ_DESC_NUM		0x40	/* 64 descriptors / channel */
+
+#define LTQ_DMA_OWN		BIT(31)	/* owner bit */
+#define LTQ_DMA_C		BIT(30) /* complete bit */
+#define LTQ_DMA_SOP		BIT(29) /* start of packet */
+#define LTQ_DMA_EOP		BIT(28) /* end of packet */
+#define LTQ_DMA_TX_OFFSET(x)	((x & 0x1f) << 23) /* data bytes offset */
+#define LTQ_DMA_RX_OFFSET(x)	((x & 0x7) << 23) /* data bytes offset */
+#define LTQ_DMA_SIZE_MASK	(0xffff) /* the size field is 16 bit */
+
+struct ltq_dma_desc {
+	u32 ctl;
+	u32 addr;
+};
+
+struct ltq_dma_channel {
+	int nr;				/* the channel number */
+	int irq;			/* the mapped irq */
+	int desc;			/* the current descriptor */
+	struct ltq_dma_desc *desc_base;	/* the descriptor base */
+	int phys;			/* physical addr */
+};
+
+enum {
+	DMA_PORT_ETOP = 0,
+	DMA_PORT_DEU,
+};
+
+extern void ltq_dma_enable_irq(struct ltq_dma_channel *ch);
+extern void ltq_dma_disable_irq(struct ltq_dma_channel *ch);
+extern void ltq_dma_ack_irq(struct ltq_dma_channel *ch);
+extern void ltq_dma_open(struct ltq_dma_channel *ch);
+extern void ltq_dma_close(struct ltq_dma_channel *ch);
+extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch);
+extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch);
+extern void ltq_dma_free(struct ltq_dma_channel *ch);
+extern void ltq_dma_init_port(int p);
+
+#endif

arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Netlogic Microsystems
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+#define cpu_has_watch		1
+#define cpu_has_mips16		0
+#define cpu_has_counter		1
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck		1
+#define cpu_has_ejtag		1
+
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_nofpuex		0
+#define cpu_has_64bits		1
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	1
+#define cpu_has_mips64r2	0
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+
+#endif /* __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-netlogic/irq.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Netlogic Microsystems.
+ */
+#ifndef __ASM_NETLOGIC_IRQ_H
+#define __ASM_NETLOGIC_IRQ_H
+
+#define NR_IRQS			64
+#define MIPS_CPU_IRQ_BASE	0
+
+#endif /* __ASM_NETLOGIC_IRQ_H */

arch/mips/include/asm/mach-netlogic/war.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Netlogic Microsystems.
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_NLM_WAR_H
+#define __ASM_MIPS_MACH_NLM_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_NLM_WAR_H */

arch/mips/include/asm/module.h

@@ -118,6 +118,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "LOONGSON2 "
 #elif defined CONFIG_CPU_CAVIUM_OCTEON
 #define MODULE_PROC_FAMILY "OCTEON "
+#elif defined CONFIG_CPU_XLR
+#define MODULE_PROC_FAMILY "XLR "
 #else
 #error MODULE_PROC_FAMILY undefined for your processor configuration
 #endif

arch/mips/include/asm/netlogic/interrupt.h

+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_INTERRUPT_H
+#define _ASM_NLM_INTERRUPT_H
+
+/* Defines for the IRQ numbers */
+
+#define IRQ_IPI_SMP_FUNCTION	3
+#define IRQ_IPI_SMP_RESCHEDULE	4
+#define IRQ_MSGRING		6
+#define IRQ_TIMER		7
+
+#endif

arch/mips/include/asm/netlogic/mips-extns.h

+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_MIPS_EXTS_H
+#define _ASM_NLM_MIPS_EXTS_H
+
+/*
+ * XLR and XLP interrupt request and interrupt mask registers
+ */
+#define read_c0_eirr()		__read_64bit_c0_register($9, 6)
+#define read_c0_eimr()		__read_64bit_c0_register($9, 7)
+#define write_c0_eirr(val)	__write_64bit_c0_register($9, 6, val)
+
+/*
+ * Writing EIMR in 32 bit is a special case, the lower 8 bit of the
+ * EIMR is shadowed in the status register, so we cannot save and
+ * restore status register for split read.
+ */
+#define write_c0_eimr(val)						\
+do {									\
+	if (sizeof(unsigned long) == 4)	{				\
+		unsigned long __flags;					\
+									\
+		local_irq_save(__flags);				\
+		__asm__ __volatile__(					\
+			".set\tmips64\n\t"				\
+			"dsll\t%L0, %L0, 32\n\t"			\
+			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
+			"or\t%L0, %L0, %M0\n\t"				\
+			"dmtc0\t%L0, $9, 7\n\t"				\
+			".set\tmips0"					\
+			: : "r" (val));					\
+		__flags = (__flags & 0xffff00ff) | (((val) & 0xff) << 8);\
+		local_irq_restore(__flags);				\
+	} else								\
+		__write_64bit_c0_register($9, 7, (val));		\
+} while (0)
+
+static inline int hard_smp_processor_id(void)
+{
+	return __read_32bit_c0_register($15, 1) & 0x3ff;
+}
+
+#endif /*_ASM_NLM_MIPS_EXTS_H */

arch/mips/include/asm/netlogic/psb-bootinfo.h

+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NETLOGIC_BOOTINFO_H
+#define _ASM_NETLOGIC_BOOTINFO_H
+
+struct psb_info {
+	uint64_t boot_level;
+	uint64_t io_base;
+	uint64_t output_device;
+	uint64_t uart_print;
+	uint64_t led_output;
+	uint64_t init;
+	uint64_t exit;
+	uint64_t warm_reset;
+	uint64_t wakeup;
+	uint64_t online_cpu_map;
+	uint64_t master_reentry_sp;
+	uint64_t master_reentry_gp;
+	uint64_t master_reentry_fn;
+	uint64_t slave_reentry_fn;
+	uint64_t magic_dword;
+	uint64_t uart_putchar;
+	uint64_t size;
+	uint64_t uart_getchar;
+	uint64_t nmi_handler;
+	uint64_t psb_version;
+	uint64_t mac_addr;
+	uint64_t cpu_frequency;
+	uint64_t board_version;
+	uint64_t malloc;
+	uint64_t free;
+	uint64_t global_shmem_addr;
+	uint64_t global_shmem_size;
+	uint64_t psb_os_cpu_map;
+	uint64_t userapp_cpu_map;
+	uint64_t wakeup_os;
+	uint64_t psb_mem_map;
+	uint64_t board_major_version;
+	uint64_t board_minor_version;
+	uint64_t board_manf_revision;
+	uint64_t board_serial_number;
+	uint64_t psb_physaddr_map;
+	uint64_t xlr_loaderip_config;
+	uint64_t bldr_envp;
+	uint64_t avail_mem_map;
+};
+
+enum {
+	NETLOGIC_IO_SPACE = 0x10,
+	PCIX_IO_SPACE,
+	PCIX_CFG_SPACE,
+	PCIX_MEMORY_SPACE,
+	HT_IO_SPACE,
+	HT_CFG_SPACE,
+	HT_MEMORY_SPACE,
+	SRAM_SPACE,
+	FLASH_CONTROLLER_SPACE
+};
+
+#define NLM_MAX_ARGS	64
+#define NLM_MAX_ENVS	32
+
+/* This is what netlboot passes and linux boot_mem_map is subtly different */
+#define NLM_BOOT_MEM_MAP_MAX	32
+struct nlm_boot_mem_map {
+	int nr_map;
+	struct nlm_boot_mem_map_entry {
+		uint64_t addr;		/* start of memory segment */
+		uint64_t size;		/* size of memory segment */
+		uint32_t type;		/* type of memory segment */
+	} map[NLM_BOOT_MEM_MAP_MAX];
+};
+
+/* Pointer to saved boot loader info */
+extern struct psb_info nlm_prom_info;
+
+#endif

arch/mips/include/asm/netlogic/xlr/gpio.h

+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_GPIO_H
+#define _ASM_NLM_GPIO_H
+
+#define NETLOGIC_GPIO_INT_EN_REG		0
+#define NETLOGIC_GPIO_INPUT_INVERSION_REG	1
+#define NETLOGIC_GPIO_IO_DIR_REG		2
+#define NETLOGIC_GPIO_IO_DATA_WR_REG		3
+#define NETLOGIC_GPIO_IO_DATA_RD_REG		4
+
+#define NETLOGIC_GPIO_SWRESET_REG		8
+#define NETLOGIC_GPIO_DRAM1_CNTRL_REG		9
+#define NETLOGIC_GPIO_DRAM1_RATIO_REG		10
+#define NETLOGIC_GPIO_DRAM1_RESET_REG		11
+#define NETLOGIC_GPIO_DRAM1_STATUS_REG		12
+#define NETLOGIC_GPIO_DRAM2_CNTRL_REG		13
+#define NETLOGIC_GPIO_DRAM2_RATIO_REG		14
+#define NETLOGIC_GPIO_DRAM2_RESET_REG		15
+#define NETLOGIC_GPIO_DRAM2_STATUS_REG		16
+
+#define NETLOGIC_GPIO_PWRON_RESET_CFG_REG	21
+#define NETLOGIC_GPIO_BIST_ALL_GO_STATUS_REG	24
+#define NETLOGIC_GPIO_BIST_CPU_GO_STATUS_REG	25
+#define NETLOGIC_GPIO_BIST_DEV_GO_STATUS_REG	26
+
+#define NETLOGIC_GPIO_FUSE_BANK_REG		35
+#define NETLOGIC_GPIO_CPU_RESET_REG		40
+#define NETLOGIC_GPIO_RNG_REG			43
+
+#define NETLOGIC_PWRON_RESET_PCMCIA_BOOT	17
+#define NETLOGIC_GPIO_LED_BITMAP	0x1700000
+#define NETLOGIC_GPIO_LED_0_SHIFT		20
+#define NETLOGIC_GPIO_LED_1_SHIFT		24
+
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_RESET	0x01
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03
+#define NETLOGIC_GPIO_LED_OUTPUT_CODE_MAIN	0x04
+
+#endif

arch/mips/include/asm/netlogic/xlr/iomap.h

+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_IOMAP_H
+#define _ASM_NLM_IOMAP_H
+
+#define DEFAULT_NETLOGIC_IO_BASE           CKSEG1ADDR(0x1ef00000)
+#define NETLOGIC_IO_DDR2_CHN0_OFFSET       0x01000
+#define NETLOGIC_IO_DDR2_CHN1_OFFSET       0x02000
+#define NETLOGIC_IO_DDR2_CHN2_OFFSET       0x03000
+#define NETLOGIC_IO_DDR2_CHN3_OFFSET       0x04000
+#define NETLOGIC_IO_PIC_OFFSET             0x08000
+#define NETLOGIC_IO_UART_0_OFFSET          0x14000
+#define NETLOGIC_IO_UART_1_OFFSET          0x15100
+
+#define NETLOGIC_IO_SIZE                   0x1000
+
+#define NETLOGIC_IO_BRIDGE_OFFSET          0x00000
+
+#define NETLOGIC_IO_RLD2_CHN0_OFFSET       0x05000
+#define NETLOGIC_IO_RLD2_CHN1_OFFSET       0x06000
+
+#define NETLOGIC_IO_SRAM_OFFSET            0x07000
+
+#define NETLOGIC_IO_PCIX_OFFSET            0x09000
+#define NETLOGIC_IO_HT_OFFSET              0x0A000
+
+#define NETLOGIC_IO_SECURITY_OFFSET        0x0B000
+
+#define NETLOGIC_IO_GMAC_0_OFFSET          0x0C000
+#define NETLOGIC_IO_GMAC_1_OFFSET          0x0D000
+#define NETLOGIC_IO_GMAC_2_OFFSET          0x0E000
+#define NETLOGIC_IO_GMAC_3_OFFSET          0x0F000
+
+/* XLS devices */
+#define NETLOGIC_IO_GMAC_4_OFFSET          0x20000
+#define NETLOGIC_IO_GMAC_5_OFFSET          0x21000
+#define NETLOGIC_IO_GMAC_6_OFFSET          0x22000
+#define NETLOGIC_IO_GMAC_7_OFFSET          0x23000
+
+#define NETLOGIC_IO_PCIE_0_OFFSET          0x1E000
+#define NETLOGIC_IO_PCIE_1_OFFSET          0x1F000
+#define NETLOGIC_IO_SRIO_0_OFFSET          0x1E000
+#define NETLOGIC_IO_SRIO_1_OFFSET          0x1F000
+
+#define NETLOGIC_IO_USB_0_OFFSET           0x24000
+#define NETLOGIC_IO_USB_1_OFFSET           0x25000
+
+#define NETLOGIC_IO_COMP_OFFSET            0x1D000
+/* end XLS devices */
+
+/* XLR devices */
+#define NETLOGIC_IO_SPI4_0_OFFSET          0x10000
+#define NETLOGIC_IO_XGMAC_0_OFFSET         0x11000
+#define NETLOGIC_IO_SPI4_1_OFFSET          0x12000
+#define NETLOGIC_IO_XGMAC_1_OFFSET         0x13000
+/* end XLR devices */
+
+#define NETLOGIC_IO_I2C_0_OFFSET           0x16000
+#define NETLOGIC_IO_I2C_1_OFFSET           0x17000
+
+#define NETLOGIC_IO_GPIO_OFFSET            0x18000
+#define NETLOGIC_IO_FLASH_OFFSET           0x19000
+#define NETLOGIC_IO_TB_OFFSET              0x1C000
+
+#define NETLOGIC_CPLD_OFFSET               KSEG1ADDR(0x1d840000)
+
+/*
+ * Base Address (Virtual) of the PCI Config address space
+ * For now, choose 256M phys in kseg1 = 0xA0000000 + (1<<28)
+ * Config space spans 256 (num of buses) * 256 (num functions) * 256 bytes
+ * ie 1<<24 = 16M
+ */
+#define DEFAULT_PCI_CONFIG_BASE         0x18000000
+#define DEFAULT_HT_TYPE0_CFG_BASE       0x16000000
+#define DEFAULT_HT_TYPE1_CFG_BASE       0x17000000
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+typedef volatile __u32 nlm_reg_t;
+extern unsigned long netlogic_io_base;
+
+/* FIXME read once in write_reg */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define netlogic_read_reg(base, offset)		((base)[(offset)])
+#define netlogic_write_reg(base, offset, value)	((base)[(offset)] = (value))
+#else
+#define netlogic_read_reg(base, offset)		(be32_to_cpu((base)[(offset)]))
+#define netlogic_write_reg(base, offset, value) \
+				((base)[(offset)] = cpu_to_be32((value)))
+#endif
+
+#define netlogic_read_reg_le32(base, offset) (le32_to_cpu((base)[(offset)]))
+#define netlogic_write_reg_le32(base, offset, value) \
+				((base)[(offset)] = cpu_to_le32((value)))
+#define netlogic_io_mmio(offset) ((nlm_reg_t *)(netlogic_io_base+(offset)))
+#endif /* __ASSEMBLY__ */
+#endif

arch/mips/include/asm/netlogic/xlr/pic.h

+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_XLR_PIC_H
+#define _ASM_NLM_XLR_PIC_H
+
+#define PIC_CLKS_PER_SEC		66666666ULL
+/* PIC hardware interrupt numbers */
+#define PIC_IRT_WD_INDEX		0
+#define PIC_IRT_TIMER_0_INDEX		1
+#define PIC_IRT_TIMER_1_INDEX		2
+#define PIC_IRT_TIMER_2_INDEX		3
+#define PIC_IRT_TIMER_3_INDEX		4
+#define PIC_IRT_TIMER_4_INDEX		5
+#define PIC_IRT_TIMER_5_INDEX		6
+#define PIC_IRT_TIMER_6_INDEX		7
+#define PIC_IRT_TIMER_7_INDEX		8
+#define PIC_IRT_CLOCK_INDEX		PIC_IRT_TIMER_7_INDEX
+#define PIC_IRT_UART_0_INDEX		9
+#define PIC_IRT_UART_1_INDEX		10
+#define PIC_IRT_I2C_0_INDEX		11
+#define PIC_IRT_I2C_1_INDEX		12
+#define PIC_IRT_PCMCIA_INDEX		13
+#define PIC_IRT_GPIO_INDEX		14
+#define PIC_IRT_HYPER_INDEX		15
+#define PIC_IRT_PCIX_INDEX		16
+/* XLS */
+#define PIC_IRT_CDE_INDEX		15
+#define PIC_IRT_BRIDGE_TB_XLS_INDEX	16
+/* XLS */
+#define PIC_IRT_GMAC0_INDEX		17
+#define PIC_IRT_GMAC1_INDEX		18
+#define PIC_IRT_GMAC2_INDEX		19
+#define PIC_IRT_GMAC3_INDEX		20
+#define PIC_IRT_XGS0_INDEX		21
+#define PIC_IRT_XGS1_INDEX		22
+#define PIC_IRT_HYPER_FATAL_INDEX	23
+#define PIC_IRT_PCIX_FATAL_INDEX	24
+#define PIC_IRT_BRIDGE_AERR_INDEX	25
+#define PIC_IRT_BRIDGE_BERR_INDEX	26
+#define PIC_IRT_BRIDGE_TB_XLR_INDEX	27
+#define PIC_IRT_BRIDGE_AERR_NMI_INDEX	28
+/* XLS */
+#define PIC_IRT_GMAC4_INDEX		21
+#define PIC_IRT_GMAC5_INDEX		22
+#define PIC_IRT_GMAC6_INDEX		23
+#define PIC_IRT_GMAC7_INDEX		24
+#define PIC_IRT_BRIDGE_ERR_INDEX	25
+#define PIC_IRT_PCIE_LINK0_INDEX	26
+#define PIC_IRT_PCIE_LINK1_INDEX	27
+#define PIC_IRT_PCIE_LINK2_INDEX	23
+#define PIC_IRT_PCIE_LINK3_INDEX	24
+#define PIC_IRT_PCIE_XLSB0_LINK2_INDEX	28
+#define PIC_IRT_PCIE_XLSB0_LINK3_INDEX	29
+#define PIC_IRT_SRIO_LINK0_INDEX	26
+#define PIC_IRT_SRIO_LINK1_INDEX	27
+#define PIC_IRT_SRIO_LINK2_INDEX	28
+#define PIC_IRT_SRIO_LINK3_INDEX	29
+#define PIC_IRT_PCIE_INT_INDEX		28
+#define PIC_IRT_PCIE_FATAL_INDEX	29
+#define PIC_IRT_GPIO_B_INDEX		30
+#define PIC_IRT_USB_INDEX		31
+/* XLS */
+#define PIC_NUM_IRTS			32
+
+
+#define PIC_CLOCK_TIMER			7
+
+/* PIC Registers */
+#define PIC_CTRL			0x00
+#define PIC_IPI				0x04
+#define PIC_INT_ACK			0x06
+
+#define WD_MAX_VAL_0			0x08
+#define WD_MAX_VAL_1			0x09
+#define WD_MASK_0			0x0a
+#define WD_MASK_1			0x0b
+#define WD_HEARBEAT_0			0x0c
+#define WD_HEARBEAT_1			0x0d
+
+#define PIC_IRT_0_BASE			0x40
+#define PIC_IRT_1_BASE			0x80
+#define PIC_TIMER_MAXVAL_0_BASE		0x100
+#define PIC_TIMER_MAXVAL_1_BASE		0x110
+#define PIC_TIMER_COUNT_0_BASE		0x120
+#define PIC_TIMER_COUNT_1_BASE		0x130
+
+#define PIC_IRT_0(picintr)      (PIC_IRT_0_BASE + (picintr))
+#define PIC_IRT_1(picintr)	(PIC_IRT_1_BASE + (picintr))
+
+#define PIC_TIMER_MAXVAL_0(i)	(PIC_TIMER_MAXVAL_0_BASE + (i))
+#define PIC_TIMER_MAXVAL_1(i)	(PIC_TIMER_MAXVAL_1_BASE + (i))
+#define PIC_TIMER_COUNT_0(i)	(PIC_TIMER_COUNT_0_BASE + (i))
+#define PIC_TIMER_COUNT_1(i)	(PIC_TIMER_COUNT_0_BASE + (i))
+
+/*
+ * Mapping between hardware interrupt numbers and IRQs on CPU
+ * we use a simple scheme to map PIC interrupts 0-31 to IRQs
+ * 8-39. This leaves the IRQ 0-7 for cpu interrupts like
+ * count/compare and FMN
+ */
+#define PIC_IRQ_BASE            8
+#define PIC_INTR_TO_IRQ(i)      (PIC_IRQ_BASE + (i))
+#define PIC_IRQ_TO_INTR(i)      ((i) - PIC_IRQ_BASE)
+
+#define PIC_IRT_FIRST_IRQ	PIC_IRQ_BASE
+#define PIC_WD_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_WD_INDEX)
+#define PIC_TIMER_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_0_INDEX)
+#define PIC_TIMER_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_1_INDEX)
+#define PIC_TIMER_2_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_2_INDEX)
+#define PIC_TIMER_3_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_3_INDEX)
+#define PIC_TIMER_4_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_4_INDEX)
+#define PIC_TIMER_5_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_5_INDEX)
+#define PIC_TIMER_6_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_6_INDEX)
+#define PIC_TIMER_7_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_TIMER_7_INDEX)
+#define PIC_CLOCK_IRQ		(PIC_TIMER_7_IRQ)
+#define PIC_UART_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_UART_0_INDEX)
+#define PIC_UART_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_UART_1_INDEX)
+#define PIC_I2C_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_I2C_0_INDEX)
+#define PIC_I2C_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_I2C_1_INDEX)
+#define PIC_PCMCIA_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_PCMCIA_INDEX)
+#define PIC_GPIO_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GPIO_INDEX)
+#define PIC_HYPER_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_HYPER_INDEX)
+#define PIC_PCIX_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_PCIX_INDEX)
+/* XLS */
+#define PIC_CDE_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_CDE_INDEX)
+#define PIC_BRIDGE_TB_XLS_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLS_INDEX)
+/* end XLS */
+#define PIC_GMAC_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC0_INDEX)
+#define PIC_GMAC_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC1_INDEX)
+#define PIC_GMAC_2_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC2_INDEX)
+#define PIC_GMAC_3_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC3_INDEX)
+#define PIC_XGS_0_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_XGS0_INDEX)
+#define PIC_XGS_1_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_XGS1_INDEX)
+#define PIC_HYPER_FATAL_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_HYPER_FATAL_INDEX)
+#define PIC_PCIX_FATAL_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIX_FATAL_INDEX)
+#define PIC_BRIDGE_AERR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_INDEX)
+#define PIC_BRIDGE_BERR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_BERR_INDEX)
+#define PIC_BRIDGE_TB_XLR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLR_INDEX)
+#define PIC_BRIDGE_AERR_NMI_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX)
+/* XLS defines */
+#define PIC_GMAC_4_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC4_INDEX)
+#define PIC_GMAC_5_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC5_INDEX)
+#define PIC_GMAC_6_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC6_INDEX)
+#define PIC_GMAC_7_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GMAC7_INDEX)
+#define PIC_BRIDGE_ERR_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_ERR_INDEX)
+#define PIC_PCIE_LINK0_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK0_INDEX)
+#define PIC_PCIE_LINK1_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK1_INDEX)
+#define PIC_PCIE_LINK2_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK2_INDEX)
+#define PIC_PCIE_LINK3_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK3_INDEX)
+#define PIC_PCIE_XLSB0_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK2_INDEX)
+#define PIC_PCIE_XLSB0_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK3_INDEX)
+#define PIC_SRIO_LINK0_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK0_INDEX)
+#define PIC_SRIO_LINK1_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK1_INDEX)
+#define PIC_SRIO_LINK2_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK2_INDEX)
+#define PIC_SRIO_LINK3_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK3_INDEX)
+#define PIC_PCIE_INT_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_INT__INDEX)
+#define PIC_PCIE_FATAL_IRQ	PIC_INTR_TO_IRQ(PIC_IRT_PCIE_FATAL_INDEX)
+#define PIC_GPIO_B_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_GPIO_B_INDEX)
+#define PIC_USB_IRQ		PIC_INTR_TO_IRQ(PIC_IRT_USB_INDEX)
+#define PIC_IRT_LAST_IRQ	PIC_USB_IRQ
+/* end XLS */
+
+#ifndef __ASSEMBLY__
+static inline void pic_send_ipi(u32 ipi)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+	netlogic_write_reg(mmio, PIC_IPI, ipi);
+}
+
+static inline u32 pic_read_control(void)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+	return netlogic_read_reg(mmio, PIC_CTRL);
+}
+
+static inline void pic_write_control(u32 control)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+	netlogic_write_reg(mmio, PIC_CTRL, control);
+}
+
+static inline void pic_update_control(u32 control)
+{
+	nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET);
+
+	netlogic_write_reg(mmio, PIC_CTRL,
+		(control | netlogic_read_reg(mmio, PIC_CTRL)));
+}
+
+#define PIC_IRQ_IS_EDGE_TRIGGERED(irq)	(((irq) >= PIC_TIMER_0_IRQ) && \
+					((irq) <= PIC_TIMER_7_IRQ))
+#define PIC_IRQ_IS_IRT(irq)		(((irq) >= PIC_IRT_FIRST_IRQ) && \
+					((irq) <= PIC_IRT_LAST_IRQ))
+#endif
+
+#endif /* _ASM_NLM_XLR_PIC_H */

arch/mips/include/asm/netlogic/xlr/xlr.h

+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_NLM_XLR_H
+#define _ASM_NLM_XLR_H
+
+/* Platform UART functions */
+struct uart_port;
+unsigned int nlm_xlr_uart_in(struct uart_port *, int);
+void nlm_xlr_uart_out(struct uart_port *, int, int);
+
+/* SMP support functions */
+struct irq_desc;
+void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc);
+void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc);
+int nlm_wakeup_secondary_cpus(u32 wakeup_mask);
+void nlm_smp_irq_init(void);
+void nlm_boot_smp_nmi(void);
+void prom_pre_boot_secondary_cpus(void);
+
+extern struct plat_smp_ops nlm_smp_ops;
+extern unsigned long nlm_common_ebase;
+
+/* XLS B silicon "Rook" */
+static inline unsigned int nlm_chip_is_xls_b(void)
+{
+	uint32_t prid = read_c0_prid();
+
+	return ((prid & 0xf000) == 0x4000);
+}
+
+/*
+ *  XLR chip types
+ */
+ /* The XLS product line has chip versions 0x[48c]? */
+static inline unsigned int nlm_chip_is_xls(void)
+{
+	uint32_t prid = read_c0_prid();
+
+	return ((prid & 0xf000) == 0x8000 || (prid & 0xf000) == 0x4000 ||
+		(prid & 0xf000) == 0xc000);
+}
+
+#endif /* _ASM_NLM_XLR_H */

arch/mips/include/asm/ptrace.h

@@ -141,7 +141,8 @@ extern int ptrace_set_watch_regs(struct task_struct *child,
 #define instruction_pointer(regs) ((regs)->cp0_epc)
 #define profile_pc(regs) instruction_pointer(regs)
 
-extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+extern asmlinkage void syscall_trace_enter(struct pt_regs *regs);
+extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
 
 extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
 

arch/mips/include/asm/thread_info.h

@@ -149,6 +149,9 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
 
+/* work to do in syscall_trace_leave() */
+#define _TIF_WORK_SYSCALL_EXIT	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
+
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(0x0000ffef &				\
 					~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT))

arch/mips/jz4740/setup.c

 /*
  *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  Copyright (C) 2011, Maarten ter Huurne <maarten@treewalker.org>
  *  JZ4740 setup code
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -14,13 +15,44 @@
  */
 
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 
+#include <asm/bootinfo.h>
+
+#include <asm/mach-jz4740/base.h>
+
 #include "reset.h"
 
+
+#define JZ4740_EMC_SDRAM_CTRL 0x80
+
+
+static void __init jz4740_detect_mem(void)
+{
+	void __iomem *jz_emc_base;
+	u32 ctrl, bus, bank, rows, cols;
+	phys_t size;
+
+	jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100);
+	ctrl = readl(jz_emc_base + JZ4740_EMC_SDRAM_CTRL);
+	bus = 2 - ((ctrl >> 31) & 1);
+	bank = 1 + ((ctrl >> 19) & 1);
+	cols = 8 + ((ctrl >> 26) & 7);
+	rows = 11 + ((ctrl >> 20) & 3);
+	printk(KERN_DEBUG
+		"SDRAM preconfigured: bus:%u bank:%u rows:%u cols:%u\n",
+		bus, bank, rows, cols);
+	iounmap(jz_emc_base);
+
+	size = 1 << (bus + bank + cols + rows);
+	add_memory_region(0, size, BOOT_MEM_RAM);
+}
+
 void __init plat_mem_setup(void)
 {
 	jz4740_reset_init();
+	jz4740_detect_mem();
 }
 
 const char *get_system_type(void)

arch/mips/kernel/Makefile

@@ -52,6 +52,7 @@ obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_TX49XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_VR41XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= octeon_switch.o
+obj-$(CONFIG_CPU_XLR)		+= r4k_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP_UP)		+= smp-up.o

arch/mips/kernel/cpu-probe.c

@@ -291,6 +291,12 @@ static inline int cpu_has_confreg(void)
 #endif
 }
 
+static inline void set_elf_platform(int cpu, const char *plat)
+{
+	if (cpu == 0)
+		__elf_platform = plat;
+}
+
 /*
  * Get the FPU Implementation/Revision.
  */
@@ -614,6 +620,16 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 	case PRID_IMP_LOONGSON2:
 		c->cputype = CPU_LOONGSON2;
 		__cpu_name[cpu] = "ICT Loongson-2";
+
+		switch (c->processor_id & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON2E:
+			set_elf_platform(cpu, "loongson2e");
+			break;
+		case PRID_REV_LOONGSON2F:
+			set_elf_platform(cpu, "loongson2f");
+			break;
+		}
+
 		c->isa_level = MIPS_CPU_ISA_III;
 		c->options = R4K_OPTS |
 			     MIPS_CPU_FPU | MIPS_CPU_LLSC |
@@ -911,12 +927,14 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 	case PRID_IMP_BMIPS32_REV8:
 		c->cputype = CPU_BMIPS32;
 		__cpu_name[cpu] = "Broadcom BMIPS32";
+		set_elf_platform(cpu, "bmips32");
 		break;
 	case PRID_IMP_BMIPS3300:
 	case PRID_IMP_BMIPS3300_ALT:
 	case PRID_IMP_BMIPS3300_BUG:
 		c->cputype = CPU_BMIPS3300;
 		__cpu_name[cpu] = "Broadcom BMIPS3300";
+		set_elf_platform(cpu, "bmips3300");
 		break;
 	case PRID_IMP_BMIPS43XX: {
 		int rev = c->processor_id & 0xff;
@@ -925,15 +943,18 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 				rev <= PRID_REV_BMIPS4380_HI) {
 			c->cputype = CPU_BMIPS4380;
 			__cpu_name[cpu] = "Broadcom BMIPS4380";
+			set_elf_platform(cpu, "bmips4380");
 		} else {
 			c->cputype = CPU_BMIPS4350;
 			__cpu_name[cpu] = "Broadcom BMIPS4350";
+			set_elf_platform(cpu, "bmips4350");
 		}
 		break;
 	}
 	case PRID_IMP_BMIPS5000:
 		c->cputype = CPU_BMIPS5000;
 		__cpu_name[cpu] = "Broadcom BMIPS5000";
+		set_elf_platform(cpu, "bmips5000");
 		c->options |= MIPS_CPU_ULRI;
 		break;
 	}
@@ -956,14 +977,12 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_CAVIUM_OCTEON_PLUS;
 		__cpu_name[cpu] = "Cavium Octeon+";
 platform:
-		if (cpu == 0)
-			__elf_platform = "octeon";
+		set_elf_platform(cpu, "octeon");
 		break;
 	case PRID_IMP_CAVIUM_CN63XX:
 		c->cputype = CPU_CAVIUM_OCTEON2;
 		__cpu_name[cpu] = "Cavium Octeon II";
-		if (cpu == 0)
-			__elf_platform = "octeon2";
+		set_elf_platform(cpu, "octeon2");
 		break;
 	default:
 		printk(KERN_INFO "Unknown Octeon chip!\n");
@@ -988,6 +1007,59 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 	}
 }
 
+static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
+{
+	decode_configs(c);
+
+	c->options = (MIPS_CPU_TLB       |
+			MIPS_CPU_4KEX    |
+			MIPS_CPU_COUNTER |
+			MIPS_CPU_DIVEC   |
+			MIPS_CPU_WATCH   |
+			MIPS_CPU_EJTAG   |
+			MIPS_CPU_LLSC);
+
+	switch (c->processor_id & 0xff00) {
+	case PRID_IMP_NETLOGIC_XLR732:
+	case PRID_IMP_NETLOGIC_XLR716:
+	case PRID_IMP_NETLOGIC_XLR532:
+	case PRID_IMP_NETLOGIC_XLR308:
+	case PRID_IMP_NETLOGIC_XLR532C:
+	case PRID_IMP_NETLOGIC_XLR516C:
+	case PRID_IMP_NETLOGIC_XLR508C:
+	case PRID_IMP_NETLOGIC_XLR308C:
+		c->cputype = CPU_XLR;
+		__cpu_name[cpu] = "Netlogic XLR";
+		break;
+
+	case PRID_IMP_NETLOGIC_XLS608:
+	case PRID_IMP_NETLOGIC_XLS408:
+	case PRID_IMP_NETLOGIC_XLS404:
+	case PRID_IMP_NETLOGIC_XLS208:
+	case PRID_IMP_NETLOGIC_XLS204:
+	case PRID_IMP_NETLOGIC_XLS108:
+	case PRID_IMP_NETLOGIC_XLS104:
+	case PRID_IMP_NETLOGIC_XLS616B:
+	case PRID_IMP_NETLOGIC_XLS608B:
+	case PRID_IMP_NETLOGIC_XLS416B:
+	case PRID_IMP_NETLOGIC_XLS412B:
+	case PRID_IMP_NETLOGIC_XLS408B:
+	case PRID_IMP_NETLOGIC_XLS404B:
+		c->cputype = CPU_XLR;
+		__cpu_name[cpu] = "Netlogic XLS";
+		break;
+
+	default:
+		printk(KERN_INFO "Unknown Netlogic chip id [%02x]!\n",
+		       c->processor_id);
+		c->cputype = CPU_XLR;
+		break;
+	}
+
+	c->isa_level = MIPS_CPU_ISA_M64R1;
+	c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1;
+}
+
 #ifdef CONFIG_64BIT
 /* For use by uaccess.h */
 u64 __ua_limit;
@@ -1035,6 +1107,9 @@ __cpuinit void cpu_probe(void)
 	case PRID_COMP_INGENIC:
 		cpu_probe_ingenic(c, cpu);
 		break;
+	case PRID_COMP_NETLOGIC:
+		cpu_probe_netlogic(c, cpu);
+		break;
 	}
 
 	BUG_ON(!__cpu_name[cpu]);

arch/mips/kernel/entry.S

@@ -167,14 +167,13 @@ work_notifysig:				# deal with pending signals and
 FEXPORT(syscall_exit_work_partial)
 	SAVE_STATIC
 syscall_exit_work:
-	li	t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t0, _TIF_WORK_SYSCALL_EXIT
 	and	t0, a2			# a2 is preloaded with TI_FLAGS
 	beqz	t0, work_pending	# trace bit set?
-	local_irq_enable		# could let do_syscall_trace()
+	local_irq_enable		# could let syscall_trace_leave()
 					# call schedule() instead
 	move	a0, sp
-	li	a1, 1
-	jal	do_syscall_trace
+	jal	syscall_trace_leave
 	b	resume_userspace
 
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT)

arch/mips/kernel/ptrace.c

@@ -533,16 +533,11 @@ static inline int audit_arch(void)
  * Notification of system call entry/exit
  * - triggered by current->work.syscall_trace
  */
-asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+asmlinkage void syscall_trace_enter(struct pt_regs *regs)
 {
 	/* do the secure computing check first */
-	if (!entryexit)
 	secure_computing(regs->regs[2]);
 
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]),
-		                   -regs->regs[2]);
-
 	if (!(current->ptrace & PT_PTRACED))
 		goto out;
 
@@ -565,8 +560,40 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 	}
 
 out:
-	if (unlikely(current->audit_context) && !entryexit)
+	if (unlikely(current->audit_context))
 		audit_syscall_entry(audit_arch(), regs->regs[2],
 				    regs->regs[4], regs->regs[5],
 				    regs->regs[6], regs->regs[7]);
 }
+
+/*
+ * Notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+{
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]),
+		                   -regs->regs[2]);
+
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+
+	/* The 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
+	                         0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}

arch/mips/kernel/scall32-o32.S

@@ -88,8 +88,7 @@ syscall_trace_entry:
 	SAVE_STATIC
 	move	s0, t2
 	move	a0, sp
-	li	a1, 0
-	jal	do_syscall_trace
+	jal	syscall_trace_enter
 
 	move	t0, s0
 	RESTORE_STATIC

arch/mips/kernel/scall64-64.S

@@ -91,8 +91,7 @@ syscall_trace_entry:
 	SAVE_STATIC
 	move	s0, t2
 	move	a0, sp
-	li	a1, 0
-	jal	do_syscall_trace
+	jal	syscall_trace_enter
 
 	move	t0, s0
 	RESTORE_STATIC

arch/mips/kernel/scall64-n32.S

@@ -89,8 +89,7 @@ n32_syscall_trace_entry:
 	SAVE_STATIC
 	move	s0, t2
 	move	a0, sp
-	li	a1, 0
-	jal	do_syscall_trace
+	jal	syscall_trace_enter
 
 	move	t0, s0
 	RESTORE_STATIC

arch/mips/kernel/scall64-o32.S

@@ -123,8 +123,7 @@ trace_a_syscall:
 
 	move	s0, t2			# Save syscall pointer
 	move	a0, sp
-	li	a1, 0
-	jal	do_syscall_trace
+	jal	syscall_trace_enter
 
 	move	t0, s0
 	RESTORE_STATIC

arch/mips/kernel/syscall.c

@@ -10,12 +10,9 @@
 #include <linux/capability.h>
 #include <linux/errno.h>
 #include <linux/linkage.h>
-#include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
-#include <linux/mman.h>
 #include <linux/ptrace.h>
-#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/syscalls.h>
 #include <linux/file.h>
@@ -25,11 +22,9 @@
 #include <linux/msg.h>
 #include <linux/shm.h>
 #include <linux/compiler.h>
-#include <linux/module.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
-#include <linux/random.h>
 #include <linux/elf.h>
 
 #include <asm/asm.h>
@@ -66,121 +61,6 @@ asmlinkage int sysm_pipe(nabi_no_regargs volatile struct pt_regs regs)
 	return res;
 }
 
-unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
-
-EXPORT_SYMBOL(shm_align_mask);
-
-#define COLOUR_ALIGN(addr,pgoff)				\
-	((((addr) + shm_align_mask) & ~shm_align_mask) +	\
-	 (((pgoff) << PAGE_SHIFT) & shm_align_mask))
-
-unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
-	unsigned long len, unsigned long pgoff, unsigned long flags)
-{
-	struct vm_area_struct * vmm;
-	int do_color_align;
-	unsigned long task_size;
-
-#ifdef CONFIG_32BIT
-	task_size = TASK_SIZE;
-#else /* Must be CONFIG_64BIT*/
-	task_size = test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE;
-#endif
-
-	if (len > task_size)
-		return -ENOMEM;
-
-	if (flags & MAP_FIXED) {
-		/* Even MAP_FIXED mappings must reside within task_size.  */
-		if (task_size - len < addr)
-			return -EINVAL;
-
-		/*
-		 * We do not accept a shared mapping if it would violate
-		 * cache aliasing constraints.
-		 */
-		if ((flags & MAP_SHARED) &&
-		    ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
-			return -EINVAL;
-		return addr;
-	}
-
-	do_color_align = 0;
-	if (filp || (flags & MAP_SHARED))
-		do_color_align = 1;
-	if (addr) {
-		if (do_color_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-		else
-			addr = PAGE_ALIGN(addr);
-		vmm = find_vma(current->mm, addr);
-		if (task_size - len >= addr &&
-		    (!vmm || addr + len <= vmm->vm_start))
-			return addr;
-	}
-	addr = current->mm->mmap_base;
-	if (do_color_align)
-		addr = COLOUR_ALIGN(addr, pgoff);
-	else
-		addr = PAGE_ALIGN(addr);
-
-	for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) {
-		/* At this point:  (!vmm || addr < vmm->vm_end). */
-		if (task_size - len < addr)
-			return -ENOMEM;
-		if (!vmm || addr + len <= vmm->vm_start)
-			return addr;
-		addr = vmm->vm_end;
-		if (do_color_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-	}
-}
-
-void arch_pick_mmap_layout(struct mm_struct *mm)
-{
-	unsigned long random_factor = 0UL;
-
-	if (current->flags & PF_RANDOMIZE) {
-		random_factor = get_random_int();
-		random_factor = random_factor << PAGE_SHIFT;
-		if (TASK_IS_32BIT_ADDR)
-			random_factor &= 0xfffffful;
-		else
-			random_factor &= 0xffffffful;
-	}
-
-	mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
-	mm->get_unmapped_area = arch_get_unmapped_area;
-	mm->unmap_area = arch_unmap_area;
-}
-
-static inline unsigned long brk_rnd(void)
-{
-	unsigned long rnd = get_random_int();
-
-	rnd = rnd << PAGE_SHIFT;
-	/* 8MB for 32bit, 256MB for 64bit */
-	if (TASK_IS_32BIT_ADDR)
-		rnd = rnd & 0x7ffffful;
-	else
-		rnd = rnd & 0xffffffful;
-
-	return rnd;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
-	unsigned long base = mm->brk;
-	unsigned long ret;
-
-	ret = PAGE_ALIGN(base + brk_rnd());
-
-	if (ret < mm->brk)
-		return mm->brk;
-
-	return ret;
-}
-
 SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
 	unsigned long, prot, unsigned long, flags, unsigned long,
 	fd, off_t, offset)

arch/mips/kernel/vmlinux.lds.S

@@ -68,6 +68,7 @@ SECTIONS
 	RODATA
 
 	/* writeable */
+	_sdata = .;				/* Start of data section */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 

arch/mips/lantiq/Kconfig

+if LANTIQ
+
+config SOC_TYPE_XWAY
+	bool
+	default n
+
+choice
+	prompt "SoC Type"
+	default SOC_XWAY
+
+config SOC_AMAZON_SE
+	bool "Amazon SE"
+	select SOC_TYPE_XWAY
+
+config SOC_XWAY
+	bool "XWAY"
+	select SOC_TYPE_XWAY
+	select HW_HAS_PCI
+endchoice
+
+source "arch/mips/lantiq/xway/Kconfig"
+
+endif

arch/mips/lantiq/Makefile

+# Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+
+obj-y := irq.o setup.o clk.o prom.o devices.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_SOC_TYPE_XWAY) += xway/

arch/mips/lantiq/Platform

+#
+# Lantiq
+#
+
+platform-$(CONFIG_LANTIQ)	+= lantiq/
+cflags-$(CONFIG_LANTIQ)		+= -I$(srctree)/arch/mips/include/asm/mach-lantiq
+load-$(CONFIG_LANTIQ)		= 0xffffffff80002000
+cflags-$(CONFIG_SOC_TYPE_XWAY)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway

arch/mips/lantiq/clk.c

+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/list.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+#include "clk.h"
+
+struct clk {
+	const char *name;
+	unsigned long rate;
+	unsigned long (*get_rate) (void);
+};
+
+static struct clk *cpu_clk;
+static int cpu_clk_cnt;
+
+/* lantiq socs have 3 static clocks */
+static struct clk cpu_clk_generic[] = {
+	{
+		.name = "cpu",
+		.get_rate = ltq_get_cpu_hz,
+	}, {
+		.name = "fpi",
+		.get_rate = ltq_get_fpi_hz,
+	}, {
+		.name = "io",
+		.get_rate = ltq_get_io_region_clock,
+	},
+};
+
+static struct resource ltq_cgu_resource = {
+	.name	= "cgu",
+	.start	= LTQ_CGU_BASE_ADDR,
+	.end	= LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+/* remapped clock register range */
+void __iomem *ltq_cgu_membase;
+
+void clk_init(void)
+{
+	cpu_clk = cpu_clk_generic;
+	cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
+}
+
+static inline int clk_good(struct clk *clk)
+{
+	return clk && !IS_ERR(clk);
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->get_rate != NULL)
+		return clk->get_rate();
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	int i;
+
+	for (i = 0; i < cpu_clk_cnt; i++)
+		if (!strcmp(id, cpu_clk[i].name))
+			return &cpu_clk[i];
+	BUG();
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	/* not used */
+}
+EXPORT_SYMBOL(clk_put);
+
+static inline u32 ltq_get_counter_resolution(void)
+{
+	u32 res;
+
+	__asm__ __volatile__(
+		".set   push\n"
+		".set   mips32r2\n"
+		"rdhwr  %0, $3\n"
+		".set pop\n"
+		: "=&r" (res)
+		: /* no input */
+		: "memory");
+
+	return res;
+}
+
+void __init plat_time_init(void)
+{
+	struct clk *clk;
+
+	if (insert_resource(&iomem_resource, &ltq_cgu_resource) < 0)
+		panic("Failed to insert cgu memory\n");
+
+	if (request_mem_region(ltq_cgu_resource.start,
+			resource_size(&ltq_cgu_resource), "cgu") < 0)
+		panic("Failed to request cgu memory\n");
+
+	ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start,
+				resource_size(&ltq_cgu_resource));
+	if (!ltq_cgu_membase) {
+		pr_err("Failed to remap cgu memory\n");
+		unreachable();
+	}
+	clk = clk_get(0, "cpu");
+	mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
+	write_c0_compare(read_c0_count());
+	clk_put(clk);
+}

arch/mips/lantiq/xway/Makefile

+obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
+
+obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
+obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
+
+obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o