Merge tag 'blackfin-for-linus' of...

Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Code cleanup, some previously ignored patches, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: cleanup board files bf609: clock: drop unused clock bit set/clear functions Blackfin: bf537: rename "CONFIG_ADT75" Blackfin: bf537: rename "CONFIG_AD7314" Blackfin: bf537: rename ad2s120x ->ad2s1200 blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE" blackfin: dma: current count mmr is read only bfin_crc: Move architecture independant crc header file out of the blackfin folder. bf54x: drop unuesd HOST status,control,timeout registers bit define macros blackfin: portmux: cleanup head file Blackfin: remove "config IP_CHECKSUM_L1" blackfin: Remove GENERIC_GPIO config option again blackfin:Use generic /proc/interrupts implementation blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"

Merge tag 'blackfin-for-linus' of...
Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Code cleanup, some previously ignored patches, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: cleanup board files bf609: clock: drop unused clock bit set/clear functions Blackfin: bf537: rename "CONFIG_ADT75" Blackfin: bf537: rename "CONFIG_AD7314" Blackfin: bf537: rename ad2s120x ->ad2s1200 blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE" blackfin: dma: current count mmr is read only bfin_crc: Move architecture independant crc header file out of the blackfin folder. bf54x: drop unuesd HOST status,control,timeout registers bit define macros blackfin: portmux: cleanup head file Blackfin: remove "config IP_CHECKSUM_L1" blackfin: Remove GENERIC_GPIO config option again blackfin:Use generic /proc/interrupts implementation blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
fd18f00d · Linus Torvalds · de0c9cf9 · c4a2c58d · fd18f00d · de0c9cf9
Commit fd18f00d authored Apr 12, 2014 by Linus Torvalds
37 changed files
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -34,6 +34,7 @@ config BLACKFIN
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
 	select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
 	select GENERIC_SMP_IDLE_THREAD
 	select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
@@ -51,9 +52,6 @@ config GENERIC_BUG
 config ZONE_DMA
 	def_bool y

-config GENERIC_GPIO
-	def_bool y
-
 config FORCE_MAX_ZONEORDER
 	int
 	default "14"
@@ -870,14 +868,6 @@ config SYS_BFIN_SPINLOCK_L1
 	  If enabled, sys_bfin_spinlock function is linked
 	  into L1 instruction memory. (less latency)

-config IP_CHECKSUM_L1
-	bool "Locate IP Checksum function in L1 Memory"
-	default n
-	depends on !SMP
-	help
-	  If enabled, the IP Checksum function is linked
-	  into L1 instruction memory. (less latency)
-
 config CACHELINE_ALIGNED_L1
 	bool "Locate cacheline_aligned data to L1 Data Memory"
 	default y if !BF54x

--- a/arch/blackfin/include/asm/bfin_crc.h
+++ b/arch/blackfin/include/asm/bfin_crc.h
-/*
- * bfin_crc.h - interface to Blackfin CRC controllers
- *
- * Copyright 2012 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __BFIN_CRC_H__
-#define __BFIN_CRC_H__
-
-/* Function driver which use hardware crc must initialize the structure */
-struct crc_info {
-	/* Input data address */
-	unsigned char *in_addr;
-	/* Output data address */
-	unsigned char *out_addr;
-	/* Input or output bytes */
-	unsigned long datasize;
-	union {
-	/* CRC to compare with that of input buffer */
-	unsigned long crc_compare;
-	/* Value to compare with input data */
-	unsigned long val_verify;
-	/* Value to fill */
-	unsigned long val_fill;
-	};
-	/* Value to program the 32b CRC Polynomial */
-	unsigned long crc_poly;
-	union {
-	/* CRC calculated from the input data */
-	unsigned long crc_result;
-	/* First failed position to verify input data */
-	unsigned long pos_verify;
-	};
-	/* CRC mirror flags */
-	unsigned int bitmirr:1;
-	unsigned int bytmirr:1;
-	unsigned int w16swp:1;
-	unsigned int fdsel:1;
-	unsigned int rsltmirr:1;
-	unsigned int polymirr:1;
-	unsigned int cmpmirr:1;
-};
-
-/* Userspace interface */
-#define CRC_IOC_MAGIC		'C'
-#define CRC_IOC_CALC_CRC	_IOWR('C', 0x01, unsigned int)
-#define CRC_IOC_MEMCPY_CRC	_IOWR('C', 0x02, unsigned int)
-#define CRC_IOC_VERIFY_VAL	_IOWR('C', 0x03, unsigned int)
-#define CRC_IOC_FILL_VAL	_IOWR('C', 0x04, unsigned int)
-
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/miscdevice.h>
-
-struct crc_register {
-	u32 control;
-	u32 datacnt;
-	u32 datacntrld;
-	u32 __pad_1[2];
-	u32 compare;
-	u32 fillval;
-	u32 datafifo;
-	u32 intren;
-	u32 intrenset;
-	u32 intrenclr;
-	u32 poly;
-	u32 __pad_2[4];
-	u32 status;
-	u32 datacntcap;
-	u32 __pad_3;
-	u32 result;
-	u32 curresult;
-	u32 __pad_4[3];
-	u32 revid;
-};
-
-/* CRC_STATUS Masks */
-#define CMPERR			0x00000002	/* Compare error */
-#define DCNTEXP			0x00000010	/* datacnt register expired */
-#define IBR			0x00010000	/* Input buffer ready */
-#define OBR			0x00020000	/* Output buffer ready */
-#define IRR			0x00040000	/* Immediate result readt */
-#define LUTDONE			0x00080000	/* Look-up table generation done */
-#define FSTAT			0x00700000	/* FIFO status */
-#define MAX_FIFO		4		/* Max fifo size */
-
-/* CRC_CONTROL Masks */
-#define BLKEN			0x00000001	/* Block enable */
-#define OPMODE			0x000000F0	/* Operation mode */
-#define OPMODE_OFFSET		4		/* Operation mode mask offset*/
-#define MODE_DMACPY_CRC		1		/* MTM CRC compute and compare */
-#define MODE_DATA_FILL		2		/* MTM data fill */
-#define MODE_CALC_CRC		3		/* MSM CRC compute and compare */
-#define MODE_DATA_VERIFY	4		/* MSM data verify */
-#define AUTOCLRZ		0x00000100	/* Auto clear to zero */
-#define AUTOCLRF		0x00000200	/* Auto clear to one */
-#define OBRSTALL		0x00001000	/* Stall on output buffer ready */
-#define IRRSTALL		0x00002000	/* Stall on immediate result ready */
-#define BITMIRR			0x00010000	/* Mirror bits within each byte of 32-bit input data */
-#define BITMIRR_OFFSET		16		/* Mirror bits offset */
-#define BYTMIRR			0x00020000	/* Mirror bytes of 32-bit input data */
-#define BYTMIRR_OFFSET		17		/* Mirror bytes offset */
-#define W16SWP			0x00040000	/* Mirror uppper and lower 16-bit word of 32-bit input data */
-#define W16SWP_OFFSET		18		/* Mirror 16-bit word offset */
-#define FDSEL			0x00080000	/* FIFO is written after input data is mirrored */
-#define FDSEL_OFFSET		19		/* Mirror FIFO offset */
-#define RSLTMIRR		0x00100000	/* CRC result registers are mirrored. */
-#define RSLTMIRR_OFFSET		20		/* Mirror CRC result offset. */
-#define POLYMIRR		0x00200000	/* CRC poly register is mirrored. */
-#define POLYMIRR_OFFSET		21		/* Mirror CRC poly offset. */
-#define CMPMIRR			0x00400000	/* CRC compare register is mirrored. */
-#define CMPMIRR_OFFSET		22		/* Mirror CRC compare offset. */
-
-/* CRC_INTREN Masks */
-#define CMPERRI 		0x02		/* CRC_ERROR_INTR */
-#define DCNTEXPI 		0x10		/* CRC_STATUS_INTR */
-
-#endif
-
-#endif
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -316,8 +316,6 @@ static inline void disable_dma(unsigned int channel)
 }
 static inline void enable_dma(unsigned int channel)
 {
-	dma_ch[channel].regs->curr_x_count = 0;
-	dma_ch[channel].regs->curr_y_count = 0;
 	dma_ch[channel].regs->cfg |= DMAEN;
 }
 int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data);

--- a/arch/blackfin/include/asm/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -18,16 +18,14 @@
 #define P_DONTCARE	0x1000

 #ifdef CONFIG_PINCTRL
-#include <asm/irq_handler.h>
+int bfin_internal_set_wake(unsigned int irq, unsigned int state);

 #define gpio_pint_regs bfin_pint_regs
 #define adi_internal_set_wake bfin_internal_set_wake

-#define peripheral_request(per, label) 0
+#define peripheral_request(per, label) (0)
 #define peripheral_free(per)
-#define peripheral_request_list(per, label) \
-	(pdev ? (IS_ERR(devm_pinctrl_get_select_default(&pdev->dev)) \
-	? -EINVAL : 0) : 0)
+#define peripheral_request_list(per, label) (0)
 #define peripheral_free_list(per)
 #else
 int peripheral_request(unsigned short per, const char *label);
@@ -39,7 +37,7 @@ void peripheral_free_list(const unsigned short per[]);
 #include <linux/err.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <mach/portmux.h>
-#include <linux/gpio.h>
+#include <mach/gpio.h>

 #ifndef P_SPORT2_TFS
 #define P_SPORT2_TFS P_UNDEF

--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -11,6 +11,7 @@
 #include <linux/kallsyms.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/seq_file.h>
 #include <asm/irq_handler.h>
 #include <asm/trace.h>
 #include <asm/pda.h>
@@ -33,37 +34,15 @@ static struct irq_desc bad_irq_desc = {
 #endif

 #ifdef CONFIG_PROC_FS
-int show_interrupts(struct seq_file *p, void *v)
+int arch_show_interrupts(struct seq_file *p, int prec)
 {
-	int i = *(loff_t *) v, j;
-	struct irqaction *action;
-	unsigned long flags;
-
-	if (i < NR_IRQS) {
-		struct irq_desc *desc = irq_to_desc(i);
-
-		raw_spin_lock_irqsave(&desc->lock, flags);
-		action = desc->action;
-		if (!action)
-			goto skip;
-		seq_printf(p, "%3d: ", i);
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
-		seq_printf(p, " %8s", irq_desc_get_chip(desc)->name);
-		seq_printf(p, "  %s", action->name);
-		for (action = action->next; action; action = action->next)
-			seq_printf(p, "  %s", action->name);
-
-		seq_putc(p, '\n');
- skip:
-		raw_spin_unlock_irqrestore(&desc->lock, flags);
-	} else if (i == NR_IRQS) {
-		seq_printf(p, "NMI: ");
+	int j;
+
+	seq_printf(p, "%*s: ", prec, "NMI");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
 	seq_printf(p, "  CORE  Non Maskable Interrupt\n");
-		seq_printf(p, "Err: %10u\n",  atomic_read(&irq_err_count));
-	}
+	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
 	return 0;
 }
 #endif

--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF518F-EZBRD";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ezbrd_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -61,7 +61,7 @@ static struct physmap_flash_data ezbrd_flash_data = {

 static struct resource ezbrd_flash_resource = {
 	.start = 0x20000000,
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	.end   = 0x202fffff,
 #else
 	.end   = 0x203fffff,
@@ -80,14 +80,14 @@ static struct platform_device ezbrd_flash_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = {
 	P_MII0_ETxD0,
@@ -105,7 +105,7 @@ static const unsigned short bfin_mac_peripherals[] = {

 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
 	{
-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
 		.addr = 3,
 #else
 		.addr = 1,
@@ -119,7 +119,7 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
 	.phydev_data = bfin_phydev_data,
 	.phy_mode = PHY_INTERFACE_MODE_MII,
 	.mac_peripherals = bfin_mac_peripherals,
-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
 	.phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
 #endif
 	.vlan1_mask = 1,
@@ -140,7 +140,7 @@ static struct platform_device bfin_mac_device = {
 	}
 };

-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
 static struct dsa_chip_data ksz8893m_switch_chip_data = {
 	.mii_bus = &bfin_mii_bus.dev,
 	.port_names = {
@@ -165,8 +165,7 @@ static struct platform_device ksz8893m_switch_device = {
 #endif
 #endif

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -193,13 +192,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
 	.vref_delay_usecs	= 50,	/* internal, no capacitor */
@@ -216,8 +215,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -230,9 +228,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-#if defined(CONFIG_NET_DSA_KSZ8893M) \
-	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
 	{
 		.modalias = "ksz8893m",
 		.max_speed_hz = 5000000,
@@ -244,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
@@ -254,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
@@ -264,7 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select  = 2,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
 	 && defined(CONFIG_SND_SOC_WM8731_SPI)
 	{
 		.modalias	= "wm8731",
@@ -274,7 +271,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -282,7 +279,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 1,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	{
 		.modalias = "bfin-lq035q1-spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -294,7 +291,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 };

 /* SPI controller data */
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI (0) */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 6,
@@ -366,7 +363,7 @@ static struct platform_device bfin_spi1_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -465,7 +462,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -520,7 +517,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -528,7 +525,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -556,25 +553,25 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
 	{
 		I2C_BOARD_INFO("ssm2602", 0x1b),
 	},
 #endif
 };

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -645,7 +642,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

@@ -667,7 +664,7 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)

 static struct bfin_sd_host bfin_sdh_data = {
 	.dma_chan = CH_RSI,
@@ -710,24 +707,24 @@ static struct platform_device *stamp_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
 	&ksz8893m_switch_device,
 #endif
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 	&bfin_spi1_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -736,7 +733,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -745,15 +742,15 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -762,15 +759,15 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
 	&bf51x_sdh_device,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ezbrd_flash_device,
 #endif
 };
@@ -784,7 +781,7 @@ static int __init ezbrd_init(void)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
 	peripheral_request(P_AMS2, "ParaFlash");
-#if !defined(CONFIG_SPI_BFIN5XX) && !defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if !IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	peripheral_request(P_AMS3, "ParaFlash");
 #endif
 	return 0;

--- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c
+++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -36,7 +36,7 @@ const char bfin_board_name[] = "Bluetechnix TCM-BF518";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition tcm_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -73,14 +73,14 @@ static struct platform_device tcm_flash_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;

@@ -113,8 +113,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -141,13 +140,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
 	.vref_delay_usecs	= 50,	/* internal, no capacitor */
@@ -164,8 +163,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -178,7 +176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -188,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
@@ -198,7 +196,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select  = 2,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
 	 && defined(CONFIG_SND_SOC_WM8731_SPI)
 	{
 		.modalias	= "wm8731",
@@ -208,7 +206,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -216,7 +214,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 1,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	{
 		.modalias = "bfin-lq035q1-spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -228,7 +226,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 };

 /* SPI controller data */
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI (0) */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 6,
@@ -300,7 +298,7 @@ static struct platform_device bfin_spi1_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -399,7 +397,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -454,7 +452,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -482,12 +480,12 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
@@ -495,7 +493,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #endif
 };

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -566,7 +564,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

@@ -588,7 +586,7 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)

 static struct bfin_sd_host bfin_sdh_data = {
 	.dma_chan = CH_RSI,
@@ -631,21 +629,21 @@ static struct platform_device *tcm_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 	&bfin_spi1_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -654,7 +652,7 @@ static struct platform_device *tcm_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -663,11 +661,11 @@ static struct platform_device *tcm_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -676,15 +674,15 @@ static struct platform_device *tcm_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
 	&bf51x_sdh_device,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&tcm_flash_device,
 #endif
 };

--- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
+++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -37,7 +37,7 @@ const char bfin_board_name[] = "ADI BF527-AD7160EVAL";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 static struct resource musb_resources[] = {
 	[0] = {
 		.start	= 0xffc03800,
@@ -97,7 +97,7 @@ static struct platform_device musb_device = {
 };
 #endif

-#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
 static struct resource bf52x_ra158z_resources[] = {
 	{
 		.start = IRQ_PPI_ERROR,
@@ -114,7 +114,7 @@ static struct platform_device bf52x_ra158z_device = {
 };
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ad7160eval_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -154,7 +154,7 @@ static struct platform_device ad7160eval_flash_device = {
 };
 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
@@ -200,14 +200,14 @@ static struct platform_device bf5xx_nand_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;

@@ -241,8 +241,7 @@ static struct platform_device bfin_mac_device = {
 #endif


-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -269,13 +268,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -284,8 +283,7 @@ static struct platform_device bfin_i2s = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -297,8 +295,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -306,7 +303,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 4,
 	},
 #endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 30000000,     /* max spi clock (SCK) speed in HZ */
@@ -316,7 +313,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -326,7 +323,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
@@ -364,7 +361,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -475,7 +472,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -530,7 +527,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
 #include <linux/input/ad7160.h>
 static const struct ad7160_platform_data bfin_ad7160_ts_info = {
 	.sensor_x_res = 854,
@@ -560,7 +557,7 @@ static const struct ad7160_platform_data bfin_ad7160_ts_info = {
 };
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -588,7 +585,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
 	{
 		I2C_BOARD_INFO("ad7160", 0x33),
 		.irq = IRQ_PH1,
@@ -597,7 +594,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #endif
 };

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -668,7 +665,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 #include <asm/bfin_rotary.h>

 static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -725,28 +722,28 @@ static struct platform_device *stamp_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 	&bf5xx_nand_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 	&musb_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -755,11 +752,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
 	&bf52x_ra158z_device,
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -768,11 +765,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -781,15 +778,15 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 	&bfin_rotary_device,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ad7160eval_flash_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s,
 #endif
 };

--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF527";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 #include <linux/usb/isp1760.h>
 static struct resource bfin_isp1760_resources[] = {
 	[0] = {
@@ -72,7 +72,7 @@ static struct platform_device bfin_isp1760_device = {
 };
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 static struct resource musb_resources[] = {
 	[0] = {
 		.start	= 0xffc03800,
@@ -134,7 +134,7 @@ static struct platform_device musb_device = {
 };
 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
@@ -180,7 +180,7 @@ static struct platform_device bf5xx_nand_device = {
 };
 #endif

-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 static struct resource bfin_pcmcia_cf_resources[] = {
 	{
 		.start = 0x20310000, /* IO PORT */
@@ -209,14 +209,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -249,7 +249,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
@@ -276,7 +276,7 @@ static struct platform_device dm9000_device = {
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;

@@ -309,7 +309,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -330,8 +330,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -358,13 +357,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
 	.vref_delay_usecs	= 50,	/* internal, no capacitor */
@@ -381,8 +380,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -395,8 +393,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -404,7 +401,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 4,
 	},
 #endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -414,7 +411,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
@@ -424,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select  = 2,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
 	 && defined(CONFIG_SND_SOC_WM8731_SPI)
 	{
 		.modalias	= "wm8731",
@@ -434,7 +431,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -444,7 +441,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -482,7 +479,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 static struct mtd_partition cm_partitions[] = {
 	{
 		.name   = "bootloader(nor)",
@@ -531,7 +528,7 @@ static struct platform_device cm_flash_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -642,7 +639,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -697,7 +694,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -725,25 +722,25 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
 	{
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
 };

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -814,7 +811,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

@@ -861,48 +858,48 @@ static struct platform_device *cmbf527_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 	&bf5xx_nand_device,
 #endif

-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 	&bfin_pcmcia_cf_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 	&bfin_isp1760_device,
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 	&musb_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
 	&dm9000_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -911,7 +908,7 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -920,11 +917,11 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -933,11 +930,11 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 	&cm_flash_device,
 #endif
 };

--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF526-EZBRD";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 static struct resource musb_resources[] = {
 	[0] = {
 		.start	= 0xffc03800,
@@ -98,7 +98,7 @@ static struct platform_device musb_device = {
 };
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ezbrd_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -138,7 +138,7 @@ static struct platform_device ezbrd_flash_device = {
 };
 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 static struct mtd_partition partition_info[] = {
 	{
 		.name = "bootloader(nand)",
@@ -188,7 +188,7 @@ static struct platform_device bf5xx_nand_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
@@ -196,7 +196,7 @@ static struct platform_device rtc_device = {
 #endif


-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;

@@ -229,8 +229,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -257,13 +256,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
 	.vref_delay_usecs	= 50,	/* internal, no capacitor */
@@ -279,7 +278,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
 #include <linux/spi/ad7879.h>
 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.model			= 7879,	/* Model = AD7879 */
@@ -297,8 +296,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -311,7 +309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
@@ -321,7 +319,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
@@ -331,7 +329,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select  = 2,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
 	{
 		.modalias = "ad7879",
 		.platform_data = &bfin_ad7879_ts_info,
@@ -342,7 +340,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
 	 && defined(CONFIG_SND_SOC_WM8731_SPI)
 	{
 		.modalias	= "wm8731",
@@ -352,7 +350,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -360,7 +358,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 1,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	{
 		.modalias = "bfin-lq035q1-spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -371,7 +369,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -409,7 +407,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -520,7 +518,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -575,7 +573,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -603,12 +601,12 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
@@ -616,7 +614,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #endif
 };

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -687,7 +685,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

@@ -731,7 +729,7 @@ static struct platform_device bfin_dpmc = {
 	},
 };

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 #include <asm/bfin-lq035q1.h>

 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
@@ -764,28 +762,28 @@ static struct platform_device *stamp_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 	&bf5xx_nand_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 	&musb_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -794,11 +792,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	&bfin_lq035q1_device,
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -807,11 +805,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -820,11 +818,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ezbrd_flash_device,
 #endif
 };

--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -42,7 +42,7 @@ const char bfin_board_name[] = "ADI BF527-EZKIT";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 #include <linux/usb/isp1760.h>
 static struct resource bfin_isp1760_resources[] = {
 	[0] = {
@@ -77,7 +77,7 @@ static struct platform_device bfin_isp1760_device = {
 };
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 static struct resource musb_resources[] = {
 	[0] = {
 		.start	= 0xffc03800,
@@ -139,7 +139,7 @@ static struct platform_device musb_device = {
 };
 #endif

-#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)

 static struct resource bf52x_t350mcqb_resources[] = {
 	{
@@ -157,7 +157,7 @@ static struct platform_device bf52x_t350mcqb_device = {
 };
 #endif

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 #include <asm/bfin-lq035q1.h>

 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
@@ -184,7 +184,7 @@ static struct platform_device bfin_lq035q1_device = {
 };
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ezkit_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -224,7 +224,7 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 static struct mtd_partition partition_info[] = {
 	{
 		.name = "bootloader(nand)",
@@ -274,7 +274,7 @@ static struct platform_device bf5xx_nand_device = {
 };
 #endif

-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 static struct resource bfin_pcmcia_cf_resources[] = {
 	{
 		.start = 0x20310000, /* IO PORT */
@@ -303,14 +303,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -343,7 +343,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
@@ -370,7 +370,7 @@ static struct platform_device dm9000_device = {
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;

@@ -403,7 +403,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -427,8 +427,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -455,13 +454,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
 	.vref_delay_usecs	= 50,	/* internal, no capacitor */
@@ -477,7 +476,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
 #include <linux/spi/ad7879.h>
 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.model			= 7879,	/* Model = AD7879 */
@@ -493,7 +492,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)

 static const u16 bfin_snd_pin[][7] = {
 	{P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
@@ -541,21 +540,21 @@ static struct resource bfin_snd_resources[][4] = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s_pcm = {
 	.name = "bfin-i2s-pcm-audio",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 static struct platform_device bfin_ac97_pcm = {
 	.name = "bfin-ac97-pcm-audio",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -567,8 +566,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	        || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 static const char * const ad1836_link[] = {
 	"bfin-i2s.0",
 	"spi0.4",
@@ -583,8 +581,7 @@ static struct platform_device bfin_ad1836_machine = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -597,8 +594,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -608,7 +604,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -619,7 +615,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
@@ -629,7 +625,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select  = 2,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
 	{
 		.modalias = "ad7879",
 		.platform_data = &bfin_ad7879_ts_info,
@@ -640,7 +636,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -648,7 +644,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 1,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	{
 		.modalias = "bfin-lq035q1-spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -659,7 +655,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -697,7 +693,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -808,7 +804,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -863,7 +859,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -890,7 +886,7 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif

-#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
 #include <linux/mfd/adp5520.h>

 	/*
@@ -956,54 +952,54 @@ static struct adp5520_platform_data adp5520_pdev_data = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
 	{
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
 	{
 		I2C_BOARD_INFO("ad7879", 0x2C),
 		.irq = IRQ_PF8,
 		.platform_data = (void *)&bfin_ad7879_ts_info,
 	},
 #endif
-#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
 	{
 		I2C_BOARD_INFO("pmic-adp5520", 0x32),
 		.irq = IRQ_PF9,
 		.platform_data = (void *)&adp5520_pdev_data,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
 	{
 		I2C_BOARD_INFO("ssm2602", 0x1b),
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("ad5252", 0x2f),
 	},
 #endif
-#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
 	{
 		I2C_BOARD_INFO("adau1373", 0x1A),
 	},
 #endif
 };

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -1074,7 +1070,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/gpio_keys.h>

 static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -1095,7 +1091,7 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif

-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 #include <asm/bfin_rotary.h>

 static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -1153,56 +1149,56 @@ static struct platform_device *stamp_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 	&bf5xx_nand_device,
 #endif

-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 	&bfin_pcmcia_cf_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 	&bfin_isp1760_device,
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 	&musb_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
 	&dm9000_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
 	&bf52x_t350mcqb_device,
 #endif

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	&bfin_lq035q1_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -1211,7 +1207,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -1220,11 +1216,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -1233,32 +1229,31 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 	&bfin_rotary_device,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ezkit_flash_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s_pcm,
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 	&bfin_ac97_pcm,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
-	defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 	&bfin_ad1836_machine,
 #endif
 };

--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -28,8 +28,7 @@
 #include <asm/portmux.h>
 #include <asm/dpmc.h>

-#if defined(CONFIG_TOUCHSCREEN_AD7879) \
-	|| defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
 #include <linux/spi/ad7879.h>
 #define LCD_BACKLIGHT_GPIO 0x40
 /* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for
@@ -45,7 +44,7 @@ const char bfin_board_name[] = "TLL6527M";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 static struct resource musb_resources[] = {
 	[0] = {
 		.start	= 0xffc03800,
@@ -104,7 +103,7 @@ static struct platform_device musb_device = {
 };
 #endif

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 #include <asm/bfin-lq035q1.h>

 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
@@ -133,7 +132,7 @@ static struct platform_device bfin_lq035q1_device = {
 };
 #endif

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 static struct mtd_partition tll6527m_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -182,7 +181,7 @@ static struct platform_device tll6527m_flash_device = {
 };
 #endif

-#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_DECODER)
 /* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented
 * outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0.
 * EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being
@@ -215,7 +214,7 @@ static struct platform_device spi_decoded_gpio = {

 #endif

-#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
 #include <linux/input/adxl34x.h>
 static const struct adxl34x_platform_data adxl345_info = {
 	.x_axis_offset = 0,
@@ -250,14 +249,14 @@ static const struct adxl34x_platform_data adxl345_info = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;

@@ -290,8 +289,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -318,14 +316,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7879) \
-	|| defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.model			= 7879,	/* Model = AD7879 */
 	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
@@ -343,7 +340,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -351,7 +348,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif

-#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
 #include <linux/spi/mcp23s08.h>
 static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
 	.chip[0].is_present = true,
@@ -364,8 +361,7 @@ static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -381,7 +377,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 /*
@@ -396,8 +392,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) \
-	|| defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
 	{
 		.modalias = "ad7879",
 		.platform_data = &bfin_ad7879_ts_info,
@@ -409,7 +404,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 10000000,
@@ -419,7 +414,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	{
 		.modalias = "bfin-lq035q1-spi",
 		.max_speed_hz = 20000000,
@@ -428,7 +423,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
 	{
 		.modalias = "mcp23s08",
 		.platform_data = &bfin_mcp23s08_sys_gpio_info,
@@ -448,7 +443,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS,
@@ -487,7 +482,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -600,7 +595,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -655,7 +650,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -683,26 +678,25 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif

-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
 	{
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) \
-	|| defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
 	{
 		I2C_BOARD_INFO("ad7879", 0x2C),
 		.irq = IRQ_PH14,
 		.platform_data = (void *)&bfin_ad7879_ts_info,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
 	{
 		I2C_BOARD_INFO("ssm2602", 0x1b),
 	},
@@ -714,8 +708,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ltc3576", 0x09),
 	},
-#if defined(CONFIG_INPUT_ADXL34X_I2C) \
-	|| defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
 	{
 		I2C_BOARD_INFO("adxl34x", 0x53),
 		.irq = IRQ_PH13,
@@ -724,8 +717,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #endif
 };

-#if defined(CONFIG_SERIAL_BFIN_SPORT) \
-	|| defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -823,28 +815,28 @@ static struct platform_device *tll6527m_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 	&musb_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	&bfin_lq035q1_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -853,7 +845,7 @@ static struct platform_device *tll6527m_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -862,12 +854,11 @@ static struct platform_device *tll6527m_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) \
-	|| defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -876,15 +867,15 @@ static struct platform_device *tll6527m_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 	&tll6527m_flash_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s,
 #endif

-#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_DECODER)
 	&spi_decoded_gpio,
 #endif
 };

--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -14,7 +14,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/irq.h>
@@ -29,7 +29,7 @@
 */
 const char bfin_board_name[] = "HV Sistemas H8606";

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
@@ -39,7 +39,7 @@ static struct platform_device rtc_device = {
 /*
 *  Driver needs to know address, irq and flag pin.
 */
- #if	defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x20300000,
@@ -67,7 +67,7 @@ static struct platform_device dm9000_device = {
 };
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -104,7 +104,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -125,10 +125,10 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */

-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader (spi)",
@@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 /* Notice: for blackfin, the speed_hz is the value of register
 * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -180,7 +180,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 16,
@@ -229,7 +229,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -280,7 +280,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -309,7 +309,7 @@ static struct platform_device bfin_sir0_device = {
 #endif
 #endif

-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)

 #include <linux/serial_8250.h>
 #include <linux/serial.h>
@@ -353,7 +353,7 @@ static struct platform_device serial8250_device = {

 #endif

-#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)

 /*
 * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
@@ -382,43 +382,43 @@ static struct platform_device opencores_kbd_device = {
 #endif

 static struct platform_device *h8606_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if	defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
 	&dm9000_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif

-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)
 	&serial8250_device,
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
 	&opencores_kbd_device,
 #endif
 };
@@ -428,7 +428,7 @@ static int __init H8606_init(void)
 	printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
 	return 0;

--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -31,7 +31,7 @@
 */
 const char bfin_board_name[] = "BlackStamp";

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
@@ -41,7 +41,7 @@ static struct platform_device rtc_device = {
 /*
 *  Driver needs to know address, irq and flag pin.
 */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -74,7 +74,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -105,14 +105,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -125,7 +125,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -136,7 +136,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -146,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -184,7 +184,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -235,7 +235,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -264,7 +264,7 @@ static struct platform_device bfin_sir0_device = {
 #endif
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -335,7 +335,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

@@ -358,7 +358,7 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif

-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 #include <linux/i2c-gpio.h>

 static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -413,32 +413,32 @@ static struct platform_device *stamp_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif


-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -447,11 +447,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 	&i2c_gpio_device,
 #endif
 };
@@ -469,7 +469,7 @@ static int __init blackstamp_init(void)
 	if (ret < 0)
 		return ret;

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	/*
 	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
 	 * the bfin-async-map driver takes care of flipping between

--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -15,7 +15,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/mmc_spi.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/irq.h>
@@ -29,9 +29,9 @@
 */
 const char bfin_board_name[] = "Bluetechnix CM BF533";

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -62,14 +62,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80",       /* Name of spi_driver for this device */
@@ -82,7 +82,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -91,7 +91,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -140,14 +140,14 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -178,7 +178,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 #include <linux/smsc911x.h>

 static struct resource smsc911x_resources[] = {
@@ -212,7 +212,7 @@ static struct platform_device smsc911x_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -263,7 +263,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -292,7 +292,7 @@ static struct platform_device bfin_sir0_device = {
 #endif
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -363,7 +363,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 static struct resource isp1362_hcd_resources[] = {
 	{
 		.start = 0x20308000,
@@ -403,7 +403,7 @@ static struct platform_device isp1362_hcd_device = {
 #endif


-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -426,7 +426,7 @@ static struct platform_device net2272_bfin_device = {



-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition para_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -495,19 +495,19 @@ static struct platform_device *cm_bf533_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -516,31 +516,31 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 	&isp1362_hcd_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 	&smsc911x_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&para_flash_device,
 #endif
 };
@@ -549,7 +549,7 @@ static int __init cm_bf533_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
 	return 0;

--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -14,7 +14,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/irq.h>
@@ -29,7 +29,7 @@
 */
 const char bfin_board_name[] = "ADI BF533-EZKIT";

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
@@ -40,7 +40,7 @@ static struct platform_device rtc_device = {
 *  USB-LAN EzExtender board
 *  Driver needs to know address, irq and flag pin.
 */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -72,7 +72,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ezkit_partitions_a[] = {
 	{
 		.name       = "bootloader(nor a)",
@@ -138,7 +138,7 @@ static struct platform_device ezkit_flash_device_b = {
 };
 #endif

-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
 static struct platdata_mtd_ram sram_data_a = {
 	.mapname   = "Flash A SRAM",
 	.bankwidth = 2,
@@ -182,7 +182,7 @@ static struct platform_device sram_device_b = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -214,7 +214,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -227,7 +227,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -235,7 +235,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 4,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -245,7 +245,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -283,7 +283,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -334,7 +334,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -363,7 +363,7 @@ static struct platform_device bfin_sir0_device = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

@@ -387,7 +387,7 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif

-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 #include <linux/i2c-gpio.h>

 static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -435,14 +435,14 @@ static struct platform_device bfin_dpmc = {
 };

 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
 	{
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
 };

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -450,7 +450,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 static struct platform_device bfin_ac97 = {
 	.name = "bfin-ac97",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -462,53 +462,53 @@ static struct platform_device *ezkit_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ezkit_flash_device_a,
 	&ezkit_flash_device_b,
 #endif

-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
 	&sram_device_a,
 	&sram_device_b,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 	&i2c_gpio_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s,
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 	&bfin_ac97,
 #endif
 };

--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -15,7 +15,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <asm/irq.h>
@@ -32,7 +32,7 @@ const char bfin_board_name[] = "IP04/IP08";
 *  Driver needs to know address, irq and flag pin.
 */
 #if defined(CONFIG_BFIN532_IP0X)
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)

 #include <linux/dm9000.h>

@@ -104,10 +104,10 @@ static struct platform_device dm9000_device2 = {
 #endif


-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,		/* if 1 - block!!! */
 };
@@ -116,7 +116,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 /* Notice: for blackfin, the speed_hz is the value of register
 * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 2,
@@ -142,7 +142,7 @@ static struct platform_device spi_bfin_master_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -193,7 +193,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -222,7 +222,7 @@ static struct platform_device bfin_sir0_device = {
 #endif
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 static struct resource isp1362_hcd_resources[] = {
 	{
 		.start = 0x20300000,
@@ -264,29 +264,29 @@ static struct platform_device isp1362_hcd_device = {

 static struct platform_device *ip0x_devices[] __initdata = {
 #if defined(CONFIG_BFIN532_IP0X)
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
 	&dm9000_device1,
 	&dm9000_device2,
 #endif
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&spi_bfin_master_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 	&isp1362_hcd_device,
 #endif
 };

--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -14,7 +14,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/mmc_spi.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/irq.h>
@@ -30,7 +30,7 @@
 */
 const char bfin_board_name[] = "ADI BF533-STAMP";

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
@@ -40,7 +40,7 @@ static struct platform_device rtc_device = {
 /*
 *  Driver needs to know address, irq and flag pin.
 */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -73,7 +73,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -97,7 +97,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
+#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
 static struct mtd_partition stamp_partitions[] = {
 	{
 		.name   = "bootloader(nor)",
@@ -147,7 +147,7 @@ static struct platform_device stamp_flash_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -178,7 +178,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 static int bfin_mmc_spi_init(struct device *dev,
 	irqreturn_t (*detect_int)(int, void *), void *data)
@@ -206,7 +206,7 @@ static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -219,8 +219,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
-	defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -231,7 +230,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -239,7 +238,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 1,
 	},
 #endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -252,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -290,7 +289,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -341,7 +340,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -370,8 +369,7 @@ static struct platform_device bfin_sir0_device = {
 #endif
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || \
-	defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -442,7 +440,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
 static struct resource bfin_sport0_resources[] = {
 	{
 		.start = SPORT0_TCR1,
@@ -486,7 +484,7 @@ static struct platform_device bfin_sport0_device = {
 };
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

@@ -509,7 +507,7 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif

-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 #include <linux/i2c-gpio.h>

 static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -530,29 +528,29 @@ static struct platform_device i2c_gpio_device = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
+#if IS_ENABLED(CONFIG_JOYSTICK_AD7142)
 	{
 		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
 	{
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("ad5252", 0x2f),
 	},
@@ -586,9 +584,8 @@ static struct platform_device bfin_dpmc = {
 	},
 };

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
-	defined(CONFIG_SND_BF5XX_AC97) || \
-	defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+	IS_ENABLED(CONFIG_SND_BF5XX_AC97)

 #include <asm/bfin_sport.h>

@@ -640,22 +637,21 @@ static struct resource bfin_snd_resources[][4] = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s_pcm = {
 	.name = "bfin-i2s-pcm-audio",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 static struct platform_device bfin_ac97_pcm = {
 	.name = "bfin-ac97-pcm-audio",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	        || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 static const char * const ad1836_link[] = {
 	"bfin-i2s.0",
 	"spi0.4",
@@ -669,8 +665,7 @@ static struct platform_device bfin_ad1836_machine = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
-	defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
 static const unsigned ad73311_gpio[] = {
 	GPIO_PF4,
 };
@@ -684,22 +679,21 @@ static struct platform_device bfin_ad73311_machine = {
 };
 #endif

-#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
 static struct platform_device bfin_ad73311_codec_device = {
 	.name = "ad73311",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
 static struct platform_device bfin_ad74111_codec_device = {
 	.name = "ad74111",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
-	defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -712,8 +706,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
-	defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
 static struct platform_device bfin_ac97 = {
 	.name = "bfin-ac97",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -730,36 +723,35 @@ static struct platform_device *stamp_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || \
-	defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -768,58 +760,54 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 	&i2c_gpio_device,
 #endif

-#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
+#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
 	&stamp_flash_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s_pcm,
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 	&bfin_ac97_pcm,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
-	defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 	&bfin_ad1836_machine,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
-	defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
 	&bfin_ad73311_machine,
 #endif

-#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
 	&bfin_ad73311_codec_device,
 #endif

-#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
 	&bfin_ad74111_codec_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
-	defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
 	&bfin_i2s,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
-	defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
 	&bfin_ac97,
 #endif
 };

 static int __init net2272_init(void)
 {
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	int ret;

 	/* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */
@@ -865,7 +853,7 @@ static int __init stamp_init(void)
 	if (ret < 0)
 		return ret;

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	/*
 	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
 	 * the bfin-async-map driver takes care of flipping between

--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -16,7 +16,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/ata_platform.h>
@@ -32,10 +32,10 @@
 */
 const char bfin_board_name[] = "Bluetechnix CM BF537E";

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */

-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -66,14 +66,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -86,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -95,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -144,7 +144,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)

 /* SPORT SPI controller data */
 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
@@ -209,20 +209,20 @@ static struct platform_device bfin_sport_spi1_device = {

 #endif  /* sport spi master and devices */

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
 static struct platform_device hitachi_fb_device = {
 	.name = "hitachi-tx09",
 };
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -254,7 +254,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 static struct resource isp1362_hcd_resources[] = {
 	{
 		.start = 0x20308000,
@@ -293,7 +293,7 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -314,7 +314,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 static struct mtd_partition cm_partitions[] = {
 	{
 		.name   = "bootloader(nor)",
@@ -363,7 +363,7 @@ static struct platform_device cm_flash_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -498,7 +498,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -551,7 +551,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -578,14 +578,14 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \
-|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
+|| IS_ENABLED(CONFIG_BFIN_SPORT)
 unsigned short bfin_sport0_peripherals[] = {
 	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
 };
 #endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -650,7 +650,7 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 #endif
-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
 static struct resource bfin_sport0_resources[] = {
 	{
 		.start = SPORT0_TCR1,
@@ -694,7 +694,7 @@ static struct platform_device bfin_sport0_device = {
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;

@@ -727,7 +727,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 #define PATA_INT	IRQ_PF14

 static struct pata_platform_info bfin_pata_platform_data = {
@@ -795,19 +795,19 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
 	&bfin_sport0_device,
 #endif

-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
 	&hitachi_fb_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -816,7 +816,7 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -825,11 +825,11 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -838,44 +838,44 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 	&isp1362_hcd_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
 	&bfin_sport_spi0_device,
 	&bfin_sport_spi1_device,
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 	&bfin_pata_device,
 #endif

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 	&cm_flash_device,
 #endif
 };

 static int __init net2272_init(void)
 {
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	int ret;

 	ret = gpio_request(GPIO_PG14, "net2272");
@@ -895,11 +895,11 @@ static int __init cm_bf537e_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 	irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
 #endif


--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -16,7 +16,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/ata_platform.h>
@@ -32,10 +32,10 @@
 */
 const char bfin_board_name[] = "Bluetechnix CM BF537U";

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */

-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -66,14 +66,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -86,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -95,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -144,20 +144,20 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
 static struct platform_device hitachi_fb_device = {
 	.name = "hitachi-tx09",
 };
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -189,7 +189,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 static struct resource isp1362_hcd_resources[] = {
 	{
 		.start = 0x20308000,
@@ -228,7 +228,7 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20200000,
@@ -249,7 +249,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 static struct mtd_partition cm_partitions[] = {
 	{
 		.name   = "bootloader(nor)",
@@ -298,7 +298,7 @@ static struct platform_device cm_flash_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -397,7 +397,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -450,7 +450,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -477,7 +477,7 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -548,7 +548,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;

@@ -581,7 +581,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 #define PATA_INT	IRQ_PF14

 static struct pata_platform_info bfin_pata_platform_data = {
@@ -649,15 +649,15 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
 	&hitachi_fb_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -666,7 +666,7 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -675,11 +675,11 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -688,39 +688,39 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 	&isp1362_hcd_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 	&bfin_pata_device,
 #endif

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 	&cm_flash_device,
 #endif
 };

 static int __init net2272_init(void)
 {
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	int ret;

 	ret = gpio_request(GPIO_PH15, driver_name);
@@ -752,11 +752,11 @@ static int __init cm_bf537u_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 	irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
 #endif


--- a/arch/blackfin/mach-bf537/boards/dnp5370.c
+++ b/arch/blackfin/mach-bf537/boards/dnp5370.c
@@ -41,14 +41,14 @@ const char bfin_board_name[] = "DNP/5370";
 #define FLASH_MAC               0x202f0000
 #define CONFIG_MTD_PHYSMAP_LEN  0x300000

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;

@@ -81,7 +81,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition asmb_flash_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -125,9 +125,9 @@ static struct platform_device asmb_flash_device = {
 };
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)

 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma    = 0,	 /* use no dma transfer with this chip*/
@@ -135,7 +135,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {

 #endif

-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
 /* This mapping is for at45db642 it has 1056 page size,
 * partition size and offset should be page aligned
 */
@@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_dataflash_chip_info = {

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 /* SD/MMC card reader at SPI bus */
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias	 = "mmc_spi",
 		.max_speed_hz    = 20000000,
@@ -178,7 +178,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif

 /* 8 Megabyte Atmel NOR flash chip at SPI bus */
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
 	{
 	.modalias        = "mtd_dataflash",
 	.max_speed_hz    = 16700000,
@@ -228,7 +228,7 @@ static struct platform_device spi_bfin_master_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -328,7 +328,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -357,7 +357,7 @@ static struct platform_device i2c_bfin_twi_device = {

 static struct platform_device *dnp5370_devices[] __initdata = {

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -366,24 +366,24 @@ static struct platform_device *dnp5370_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&asmb_flash_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&spi_bfin_master_device,
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif


--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/ata_platform.h>
@@ -31,7 +31,7 @@
 */
 const char bfin_board_name[] = "CamSig Minotaur BF537";

-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 static struct resource bfin_pcmcia_cf_resources[] = {
 	{
 		.start = 0x20310000, /* IO PORT */
@@ -60,14 +60,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;

@@ -100,7 +100,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -121,11 +121,10 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)

 /* Partition sizes */
 #define FLASH_SIZE       0x00400000
@@ -162,15 +161,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -183,7 +181,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
@@ -231,7 +229,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -330,7 +328,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -385,7 +383,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -412,7 +410,7 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -484,28 +482,28 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif

 static struct platform_device *minotaur_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 	&bfin_pcmcia_cf_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -514,7 +512,7 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -523,11 +521,11 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -542,7 +540,7 @@ static int __init minotaur_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bfin_spi_board_info,
 				ARRAY_SIZE(bfin_spi_board_info));
 #endif

--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -30,7 +30,7 @@ const char bfin_board_name[] = "ADI PNAV-1.0";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 static struct resource bfin_pcmcia_cf_resources[] = {
 	{
 		.start = 0x20310000, /* IO PORT */
@@ -59,14 +59,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -99,7 +99,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;

@@ -132,7 +132,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -153,11 +153,10 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -188,13 +187,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
 	.vref_delay_usecs	= 50,	/* internal, no capacitor */
@@ -211,8 +210,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -225,8 +223,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -234,7 +231,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 4,
 	},
 #endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
@@ -244,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 {
 	.modalias		= "ad7877",
 	.platform_data		= &bfin_ad7877_ts_info,
@@ -294,13 +291,13 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
 static struct platform_device bfin_fb_device = {
 	.name = "bf537-lq035",
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -399,7 +396,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -455,36 +452,36 @@ static struct platform_device bfin_sir1_device = {
 #endif

 static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 	&bfin_pcmcia_cf_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
 	&bfin_fb_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -493,7 +490,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -507,7 +504,7 @@ static int __init pnav_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bfin_spi_board_info,
 				ARRAY_SIZE(bfin_spi_board_info));
 #endif

--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -18,7 +18,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/i2c.h>
@@ -53,7 +53,7 @@ const char bfin_board_name[] = "ADI BF537-STAMP";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 #include <linux/usb/isp1760.h>
 static struct resource bfin_isp1760_resources[] = {
 	[0] = {
@@ -88,7 +88,7 @@ static struct platform_device bfin_isp1760_device = {
 };
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/gpio_keys.h>

 static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -111,7 +111,7 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif

-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 static struct resource bfin_pcmcia_cf_resources[] = {
 	{
 		.start = 0x20310000, /* IO PORT */
@@ -140,14 +140,14 @@ static struct platform_device bfin_pcmcia_cf_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -180,7 +180,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
@@ -207,7 +207,7 @@ static struct platform_device dm9000_device = {
 };
 #endif

-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_SL811_HCD)
 static struct resource sl811_hcd_resources[] = {
 	{
 		.start = 0x20340000,
@@ -251,7 +251,7 @@ static struct platform_device sl811_hcd_device = {
 };
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 static struct resource isp1362_hcd_resources[] = {
 	{
 		.start = 0x20360000,
@@ -290,7 +290,7 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
 static unsigned short bfin_can_peripherals[] = {
 	P_CAN0_RX, P_CAN0_TX, 0
 };
@@ -328,7 +328,7 @@ static struct platform_device bfin_can_device = {
 };
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;

@@ -361,7 +361,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -385,7 +385,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };

 static struct mtd_partition bfin_plat_nand_partitions[] = {
@@ -461,7 +461,7 @@ static void bfin_plat_nand_init(void)
 static void bfin_plat_nand_init(void) {}
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition stamp_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -509,8 +509,7 @@ static struct platform_device stamp_flash_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -541,7 +540,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
 #include <linux/input/ad714x.h>

 static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
@@ -602,7 +601,7 @@ static struct ad714x_platform_data ad7147_spi_platform_data = {
 };
 #endif

-#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
 #include <linux/input/ad714x.h>
 static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
 	{
@@ -649,24 +648,24 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = {
 };
 #endif

-#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+#if IS_ENABLED(CONFIG_AD2S90)
 static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
-static unsigned short ad2s120x_platform_data[] = {
+#if IS_ENABLED(CONFIG_AD2S1200)
+static unsigned short ad2s1200_platform_data[] = {
 	/* used as SAMPLE and RDVEL */
 	GPIO_PF5, GPIO_PF6, 0
 };

-static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
+static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+#if IS_ENABLED(CONFIG_AD2S1210)
 static unsigned short ad2s1210_platform_data[] = {
 	/* use as SAMPLE, A0, A1 */
 	GPIO_PF7, GPIO_PF8, GPIO_PF9,
@@ -682,13 +681,13 @@ static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
 };
 #endif

-#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
+#if IS_ENABLED(CONFIG_SENSORS_AD7314)
 static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

-#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
+#if IS_ENABLED(CONFIG_AD7816)
 static unsigned short ad7816_platform_data[] = {
 	GPIO_PF4, /* rdwr_pin */
 	GPIO_PF5, /* convert_pin */
@@ -701,7 +700,7 @@ static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
 };
 #endif

-#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
+#if IS_ENABLED(CONFIG_ADT7310)
 static unsigned long adt7310_platform_data[3] = {
 /* INT bound temperature alarm event. line 1 */
 	IRQ_PG4, IRQF_TRIGGER_LOW,
@@ -714,14 +713,14 @@ static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
 };
 #endif

-#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
+#if IS_ENABLED(CONFIG_AD7298)
 static unsigned short ad7298_platform_data[] = {
 	GPIO_PF7, /* busy_pin */
 	0,
 };
 #endif

-#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
+#if IS_ENABLED(CONFIG_ADT7316_SPI)
 static unsigned long adt7316_spi_data[2] = {
 	IRQF_TRIGGER_LOW, /* interrupt flags */
 	GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
@@ -732,7 +731,7 @@ static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5

 static int bfin_mmc_spi_init(struct device *dev,
@@ -759,7 +758,7 @@ static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 #include <linux/spi/ad7877.h>
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
@@ -776,7 +775,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
 #include <linux/spi/ad7879.h>
 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.model			= 7879,	/* Model = AD7879 */
@@ -793,7 +792,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 };
 #endif

-#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
 #include <linux/input/adxl34x.h>
 static const struct adxl34x_platform_data adxl34x_info = {
 	.x_axis_offset = 0,
@@ -832,13 +831,13 @@ static const struct adxl34x_platform_data adxl34x_info = {
 };
 #endif

-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+#if IS_ENABLED(CONFIG_ENC28J60)
 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
 	.enable_dma	= 1,
 };
 #endif

-#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
+#if IS_ENABLED(CONFIG_ADF702X)
 #include <linux/spi/adf702x.h>
 #define TXREG 0x0160A470
 static const u32 adf7021_regs[] = {
@@ -880,7 +879,7 @@ static inline void adf702x_mac_init(void)
 static inline void adf702x_mac_init(void) {}
 #endif

-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
 #include <linux/spi/ads7846.h>
 static int ads7873_get_pendown_state(void)
 {
@@ -899,8 +898,7 @@ static struct ads7846_platform_data __initdata ad7873_pdata = {
 };
 #endif

-#if defined(CONFIG_MTD_DATAFLASH) \
-	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)

 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
 	{
@@ -931,15 +929,14 @@ static struct bfin5xx_spi_chip data_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
+#if IS_ENABLED(CONFIG_AD7476)
 static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 };
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -951,8 +948,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_MTD_DATAFLASH) \
-	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
 	{	/* DataFlash chip */
 		.modalias = "mtd_dataflash",
 		.max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
@@ -964,8 +960,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -986,7 +981,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
 	{
 		.modalias = "adav801",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -996,7 +991,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
 	{
 		.modalias = "ad714x_captouch",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1008,7 +1003,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+#if IS_ENABLED(CONFIG_AD2S90)
 	{
 		.modalias = "ad2s90",
 		.bus_num = 0,
@@ -1019,17 +1014,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
+#if IS_ENABLED(CONFIG_AD2S1200)
 	{
-		.modalias = "ad2s120x",
+		.modalias = "ad2s1200",
 		.bus_num = 0,
 		.chip_select = 4,            /* CS, change it for your board */
-		.platform_data = ad2s120x_platform_data,
-		.controller_data = &ad2s120x_spi_chip_info,
+		.platform_data = ad2s1200_platform_data,
+		.controller_data = &ad2s1200_spi_chip_info,
 	},
 #endif

-#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+#if IS_ENABLED(CONFIG_AD2S1210)
 	{
 		.modalias = "ad2s1210",
 		.max_speed_hz = 8192000,
@@ -1040,7 +1035,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
+#if IS_ENABLED(CONFIG_SENSORS_AD7314)
 	{
 		.modalias = "ad7314",
 		.max_speed_hz = 1000000,
@@ -1051,7 +1046,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
+#if IS_ENABLED(CONFIG_AD7816)
 	{
 		.modalias = "ad7818",
 		.max_speed_hz = 1000000,
@@ -1063,7 +1058,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
+#if IS_ENABLED(CONFIG_ADT7310)
 	{
 		.modalias = "adt7310",
 		.max_speed_hz = 1000000,
@@ -1076,7 +1071,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
+#if IS_ENABLED(CONFIG_AD7298)
 	{
 		.modalias = "ad7298",
 		.max_speed_hz = 1000000,
@@ -1087,7 +1082,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
+#if IS_ENABLED(CONFIG_ADT7316_SPI)
 	{
 		.modalias = "adt7316",
 		.max_speed_hz = 1000000,
@@ -1100,7 +1095,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -1111,7 +1106,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
@@ -1121,7 +1116,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select  = 1,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
 	{
 		.modalias = "ad7879",
 		.platform_data = &bfin_ad7879_ts_info,
@@ -1132,7 +1127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -1140,7 +1135,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 1,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	{
 		.modalias = "bfin-lq035q1-spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -1149,7 +1144,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+#if IS_ENABLED(CONFIG_ENC28J60)
 	{
 		.modalias = "enc28j60",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -1160,7 +1155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
 	{
 		.modalias	= "adxl34x",
 		.platform_data	= &adxl34x_info,
@@ -1171,7 +1166,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
+#if IS_ENABLED(CONFIG_ADF702X)
 	{
 		.modalias = "adf702x",
 		.max_speed_hz = 16000000,     /* max spi clock (SCK) speed in HZ */
@@ -1181,7 +1176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
 	{
 		.modalias = "ads7846",
 		.max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
@@ -1192,8 +1187,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-#if defined(CONFIG_AD7476) \
-	|| defined(CONFIG_AD7476_MODULE)
+#if IS_ENABLED(CONFIG_AD7476)
 	{
 		.modalias = "ad7476", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -1204,8 +1198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_ADE7753) \
-	|| defined(CONFIG_ADE7753_MODULE)
+#if IS_ENABLED(CONFIG_ADE7753)
 	{
 		.modalias = "ade7753",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1215,8 +1208,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_1,
 	},
 #endif
-#if defined(CONFIG_ADE7754) \
-	|| defined(CONFIG_ADE7754_MODULE)
+#if IS_ENABLED(CONFIG_ADE7754)
 	{
 		.modalias = "ade7754",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1226,8 +1218,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_1,
 	},
 #endif
-#if defined(CONFIG_ADE7758) \
-	|| defined(CONFIG_ADE7758_MODULE)
+#if IS_ENABLED(CONFIG_ADE7758)
 	{
 		.modalias = "ade7758",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1237,8 +1228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_1,
 	},
 #endif
-#if defined(CONFIG_ADE7759) \
-	|| defined(CONFIG_ADE7759_MODULE)
+#if IS_ENABLED(CONFIG_ADE7759)
 	{
 		.modalias = "ade7759",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1248,8 +1238,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_1,
 	},
 #endif
-#if defined(CONFIG_ADE7854_SPI) \
-	|| defined(CONFIG_ADE7854_SPI_MODULE)
+#if IS_ENABLED(CONFIG_ADE7854_SPI)
 	{
 		.modalias = "ade7854",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1259,8 +1248,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_ADIS16060) \
-	|| defined(CONFIG_ADIS16060_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16060)
 	{
 		.modalias = "adis16060_r",
 		.max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
@@ -1278,8 +1266,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_1,
 	},
 #endif
-#if defined(CONFIG_ADIS16130) \
-	|| defined(CONFIG_ADIS16130_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16130)
 	{
 		.modalias = "adis16130",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1289,8 +1276,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_ADIS16201) \
-	|| defined(CONFIG_ADIS16201_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16201)
 	{
 		.modalias = "adis16201",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1301,8 +1287,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.irq = IRQ_PF4,
 	},
 #endif
-#if defined(CONFIG_ADIS16203) \
-	|| defined(CONFIG_ADIS16203_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16203)
 	{
 		.modalias = "adis16203",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1313,8 +1298,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.irq = IRQ_PF4,
 	},
 #endif
-#if defined(CONFIG_ADIS16204) \
-	|| defined(CONFIG_ADIS16204_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16204)
 	{
 		.modalias = "adis16204",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1325,8 +1309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.irq = IRQ_PF4,
 	},
 #endif
-#if defined(CONFIG_ADIS16209) \
-	|| defined(CONFIG_ADIS16209_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16209)
 	{
 		.modalias = "adis16209",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1337,8 +1320,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.irq = IRQ_PF4,
 	},
 #endif
-#if defined(CONFIG_ADIS16220) \
-	|| defined(CONFIG_ADIS16220_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16220)
 	{
 		.modalias = "adis16220",
 		.max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
@@ -1349,8 +1331,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.irq = IRQ_PF4,
 	},
 #endif
-#if defined(CONFIG_ADIS16240) \
-	|| defined(CONFIG_ADIS16240_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16240)
 	{
 		.modalias = "adis16240",
 		.max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
@@ -1361,8 +1342,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.irq = IRQ_PF4,
 	},
 #endif
-#if defined(CONFIG_ADIS16260) \
-	|| defined(CONFIG_ADIS16260_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16260)
 	{
 		.modalias = "adis16260",
 		.max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
@@ -1373,8 +1353,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.irq = IRQ_PF4,
 	},
 #endif
-#if defined(CONFIG_ADIS16261) \
-	|| defined(CONFIG_ADIS16261_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16261)
 	{
 		.modalias = "adis16261",
 		.max_speed_hz = 2500000,     /* max spi clock (SCK) speed in HZ */
@@ -1384,8 +1363,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_ADIS16300) \
-	|| defined(CONFIG_ADIS16300_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16300)
 	{
 		.modalias = "adis16300",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1396,8 +1374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.irq = IRQ_PF4,
 	},
 #endif
-#if defined(CONFIG_ADIS16350) \
-	|| defined(CONFIG_ADIS16350_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16350)
 	{
 		.modalias = "adis16364",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1408,8 +1385,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.irq = IRQ_PF4,
 	},
 #endif
-#if defined(CONFIG_ADIS16400) \
-	|| defined(CONFIG_ADIS16400_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16400)
 	{
 		.modalias = "adis16400",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -1421,7 +1397,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
@@ -1459,7 +1435,7 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)

 /* SPORT SPI controller data */
 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
@@ -1524,13 +1500,13 @@ static struct platform_device bfin_sport_spi1_device = {

 #endif  /* sport spi master and devices */

-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
 static struct platform_device bfin_fb_device = {
 	.name = "bf537_lq035",
 };
 #endif

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 #include <asm/bfin-lq035q1.h>

 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
@@ -1559,8 +1535,7 @@ static struct platform_device bfin_lq035q1_device = {
 };
 #endif

-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 #include <linux/videodev2.h>
 #include <media/blackfin/bfin_capture.h>
 #include <media/blackfin/ppi.h>
@@ -1580,8 +1555,7 @@ static const struct ppi_info ppi_info = {
 	.pin_req = ppi_req,
 };

-#if defined(CONFIG_VIDEO_VS6624) \
-	|| defined(CONFIG_VIDEO_VS6624_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
 static struct v4l2_input vs6624_inputs[] = {
 	{
 		.index = 0,
@@ -1624,7 +1598,7 @@ static struct platform_device bfin_capture_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -1735,7 +1709,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -1790,7 +1764,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -1817,7 +1791,7 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif

-#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
 	[0]	 = KEY_GRAVE,
 	[1]	 = KEY_1,
@@ -1902,7 +1876,7 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = {
 };
 #endif

-#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
 #include <linux/mfd/adp5520.h>

 	/*
@@ -2013,14 +1987,14 @@ static struct adp5520_platform_data adp5520_pdev_data = {

 #endif

-#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_ADP5588)
 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
 	.gpio_start = 50,
 	.pullup_dis_mask = 0,
 };
 #endif

-#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
 #include <linux/i2c/adp8870.h>
 static struct led_info adp8870_leds[] = {
 	{
@@ -2072,7 +2046,7 @@ static struct adp8870_backlight_platform_data adp8870_pdata = {
 };
 #endif

-#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
 #include <linux/i2c/adp8860.h>
 static struct led_info adp8860_leds[] = {
 	{
@@ -2114,7 +2088,7 @@ static struct adp8860_backlight_platform_data adp8860_pdata = {
 };
 #endif

-#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
 static struct regulator_consumer_supply ad5398_consumer = {
 	.supply = "current",
 };
@@ -2129,8 +2103,7 @@ static struct regulator_init_data ad5398_regulator_data = {
 	.consumer_supplies     = &ad5398_consumer,
 };

-#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
-	defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
 static struct platform_device ad5398_virt_consumer_device = {
 	.name = "reg-virt-consumer",
 	.id = 0,
@@ -2139,8 +2112,7 @@ static struct platform_device ad5398_virt_consumer_device = {
 	},
 };
 #endif
-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
-	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
 static struct regulator_bulk_data ad5398_bulk_data = {
 	.supply = "current",
 };
@@ -2161,14 +2133,14 @@ static struct platform_device ad5398_userspace_consumer_device = {
 #endif
 #endif

-#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
+#if IS_ENABLED(CONFIG_ADT7410)
 /* INT bound temperature alarm event. line 1 */
 static unsigned long adt7410_platform_data[2] = {
 	IRQ_PG4, IRQF_TRIGGER_LOW,
 };
 #endif

-#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
+#if IS_ENABLED(CONFIG_ADT7316_I2C)
 /* INT bound temperature alarm event. line 1 */
 static unsigned long adt7316_i2c_data[2] = {
 	IRQF_TRIGGER_LOW, /* interrupt flags */
@@ -2183,13 +2155,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif

-#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
 	{
 		I2C_BOARD_INFO("adav803", 0x10),
 	},
 #endif

-#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
 	{
 		I2C_BOARD_INFO("ad7142_captouch", 0x2C),
 		.irq = IRQ_PG5,
@@ -2197,39 +2169,39 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif

-#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
+#if IS_ENABLED(CONFIG_AD7150)
 	{
 		I2C_BOARD_INFO("ad7150", 0x48),
 		.irq = IRQ_PG5, /* fixme: use real interrupt number */
 	},
 #endif

-#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
+#if IS_ENABLED(CONFIG_AD7152)
 	{
 		I2C_BOARD_INFO("ad7152", 0x48),
 	},
 #endif

-#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
+#if IS_ENABLED(CONFIG_AD774X)
 	{
 		I2C_BOARD_INFO("ad774x", 0x48),
 	},
 #endif

-#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
+#if IS_ENABLED(CONFIG_ADE7854_I2C)
 	{
 		I2C_BOARD_INFO("ade7854", 0x38),
 	},
 #endif

-#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
+#if IS_ENABLED(CONFIG_SENSORS_LM75)
 	{
 		I2C_BOARD_INFO("adt75", 0x9),
 		.irq = IRQ_PG5,
 	},
 #endif

-#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
+#if IS_ENABLED(CONFIG_ADT7410)
 	{
 		I2C_BOARD_INFO("adt7410", 0x48),
 		/* CT critical temperature event. line 0 */
@@ -2238,14 +2210,14 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif

-#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
+#if IS_ENABLED(CONFIG_AD7291)
 	{
 		I2C_BOARD_INFO("ad7291", 0x20),
 		.irq = IRQ_PG5,
 	},
 #endif

-#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
+#if IS_ENABLED(CONFIG_ADT7316_I2C)
 	{
 		I2C_BOARD_INFO("adt7316", 0x48),
 		.irq = IRQ_PG6,
@@ -2253,128 +2225,128 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif

-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PG6,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
 	{
 		I2C_BOARD_INFO("ad7879", 0x2F),
 		.irq = IRQ_PG5,
 		.platform_data = (void *)&bfin_ad7879_ts_info,
 	},
 #endif
-#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
 	{
 		I2C_BOARD_INFO("adp5588-keys", 0x34),
 		.irq = IRQ_PG0,
 		.platform_data = (void *)&adp5588_kpad_data,
 	},
 #endif
-#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
 	{
 		I2C_BOARD_INFO("pmic-adp5520", 0x32),
 		.irq = IRQ_PG0,
 		.platform_data = (void *)&adp5520_pdev_data,
 	},
 #endif
-#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
 	{
 		I2C_BOARD_INFO("adxl34x", 0x53),
 		.irq = IRQ_PG3,
 		.platform_data = (void *)&adxl34x_info,
 	},
 #endif
-#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_ADP5588)
 	{
 		I2C_BOARD_INFO("adp5588-gpio", 0x34),
 		.platform_data = (void *)&adp5588_gpio_data,
 	},
 #endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
 	{
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
 	{
 		I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
 	},
 #endif
-#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
 	{
 		I2C_BOARD_INFO("adp8870", 0x2B),
 		.platform_data = (void *)&adp8870_pdata,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1371)
 	{
 		I2C_BOARD_INFO("adau1371", 0x1A),
 	},
 #endif
-#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
 	{
 		I2C_BOARD_INFO("adau1761", 0x38),
 	},
 #endif
-#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1361)
 	{
 		I2C_BOARD_INFO("adau1361", 0x38),
 	},
 #endif
-#if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1701)
 	{
 		I2C_BOARD_INFO("adau1701", 0x34),
 	},
 #endif
-#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
+#if IS_ENABLED(CONFIG_AD525X_DPOT)
 	{
 		I2C_BOARD_INFO("ad5258", 0x18),
 	},
 #endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
 	{
 		I2C_BOARD_INFO("ssm2602", 0x1b),
 	},
 #endif
-#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
 	{
 		I2C_BOARD_INFO("ad5398", 0xC),
 		.platform_data = (void *)&ad5398_regulator_data,
 	},
 #endif
-#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
 	{
 		I2C_BOARD_INFO("adp8860", 0x2A),
 		.platform_data = (void *)&adp8860_pdata,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
 	{
 		I2C_BOARD_INFO("adau1373", 0x1A),
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("ad5252", 0x2e),
 	},
 #endif
 };
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \
-|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
+|| IS_ENABLED(CONFIG_BFIN_SPORT)
 unsigned short bfin_sport0_peripherals[] = {
 	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
 };
 #endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -2439,7 +2411,7 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 #endif
-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
 static struct resource bfin_sport0_resources[] = {
 	{
 		.start = SPORT0_TCR1,
@@ -2482,7 +2454,7 @@ static struct platform_device bfin_sport0_device = {
 	},
 };
 #endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */

@@ -2569,8 +2541,8 @@ static struct platform_device bfin_dpmc = {
 	},
 };

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
-	defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+	IS_ENABLED(CONFIG_SND_BF5XX_AC97)

 #define SPORT_REQ(x) \
 	[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
@@ -2620,22 +2592,21 @@ static struct resource bfin_snd_resources[][4] = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s_pcm = {
 	.name = "bfin-i2s-pcm-audio",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 static struct platform_device bfin_ac97_pcm = {
 	.name = "bfin-ac97-pcm-audio",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	        || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 static const char * const ad1836_link[] = {
 	"bfin-i2s.0",
 	"spi0.4",
@@ -2649,8 +2620,7 @@ static struct platform_device bfin_ad1836_machine = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
-				defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
 static const unsigned ad73311_gpio[] = {
 	GPIO_PF4,
 };
@@ -2664,22 +2634,21 @@ static struct platform_device bfin_ad73311_machine = {
 };
 #endif

-#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
 static struct platform_device bfin_ad73311_codec_device = {
 	.name = "ad73311",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
-	defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
 static struct platform_device bfin_eval_adav801_device = {
 	.name = "bfin-eval-adav801",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -2691,7 +2660,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
 static struct platform_device bfin_ac97 = {
 	.name = "bfin-ac97",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -2703,7 +2672,7 @@ static struct platform_device bfin_ac97 = {
 };
 #endif

-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
 #define REGULATOR_ADP122	"adp122"
 #define REGULATOR_ADP122_UV	2500000

@@ -2741,8 +2710,7 @@ static struct platform_device adp_switch_device = {
 	},
 };

-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
-	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
 static struct regulator_bulk_data adp122_bulk_data = {
 	.supply = REGULATOR_ADP122,
 };
@@ -2763,8 +2731,7 @@ static struct platform_device adp122_userspace_consumer_device = {
 #endif
 #endif

-#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
-	defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
+#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)

 static struct resource iio_gpio_trigger_resources[] = {
 	[0] = {
@@ -2781,15 +2748,13 @@ static struct platform_device iio_gpio_trigger = {
 };
 #endif

-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
-	defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
 static struct platform_device bf5xx_adau1373_device = {
 	.name = "bfin-eval-adau1373",
 };
 #endif

-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
-	defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
 static struct platform_device bf5xx_adau1701_device = {
 	.name = "bfin-eval-adau1701",
 };
@@ -2798,73 +2763,72 @@ static struct platform_device bf5xx_adau1701_device = {
 static struct platform_device *stamp_devices[] __initdata = {

 	&bfin_dpmc,
-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
 	&bfin_sport0_device,
 #endif
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
 	&bfin_pcmcia_cf_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_SL811_HCD)
 	&sl811_hcd_device,
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 	&isp1362_hcd_device,
 #endif

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 	&bfin_isp1760_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
 	&dm9000_device,
 #endif

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
 	&bfin_can_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
 	&bfin_sport_spi0_device,
 	&bfin_sport_spi1_device,
 #endif

-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
 	&bfin_fb_device,
 #endif

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	&bfin_lq035q1_device,
 #endif

-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 	&bfin_capture_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -2873,7 +2837,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -2882,11 +2846,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -2895,95 +2859,86 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 	&bfin_pata_device,
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
 	&bfin_async_nand_device,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&stamp_flash_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s_pcm,
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 	&bfin_ac97_pcm,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
-	defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 	&bfin_ad1836_machine,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
-		defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
 	&bfin_ad73311_machine,
 #endif

-#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
 	&bfin_ad73311_codec_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
 	&bfin_i2s,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
 	&bfin_ac97,
 #endif

-#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
-#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
-	defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
+#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
 	&ad5398_virt_consumer_device,
 #endif
-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
-	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
 	&ad5398_userspace_consumer_device,
 #endif
 #endif

-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
 	&adp_switch_device,
-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
-	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
 	&adp122_userspace_consumer_device,
 #endif
 #endif

-#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
-	defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
+#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)
 	&iio_gpio_trigger,
 #endif

-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
-	defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
 	&bf5xx_adau1373_device,
 #endif

-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
-	defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
 	&bf5xx_adau1701_device,
 #endif

-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
-	defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
 	&bfin_eval_adav801_device,
 #endif
 };

 static int __init net2272_init(void)
 {
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	int ret;

 	ret = gpio_request(GPIO_PF6, "net2272");

--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -16,7 +16,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/ata_platform.h>
@@ -32,10 +32,10 @@
 */
 const char bfin_board_name[] = "Bluetechnix TCM BF537";

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */

-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -66,14 +66,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
 };
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -86,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -95,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
@@ -144,20 +144,20 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
 static struct platform_device hitachi_fb_device = {
 	.name = "hitachi-tx09",
 };
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -189,7 +189,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 static struct resource isp1362_hcd_resources[] = {
 	{
 		.start = 0x20308000,
@@ -228,7 +228,7 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x20300000,
@@ -249,7 +249,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 static struct mtd_partition cm_partitions[] = {
 	{
 		.name   = "bootloader(nor)",
@@ -298,7 +298,7 @@ static struct platform_device cm_flash_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -397,7 +397,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -452,7 +452,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -479,7 +479,7 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -550,7 +550,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 #include <linux/bfin_mac.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;

@@ -583,7 +583,7 @@ static struct platform_device bfin_mac_device = {
 };
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 #define PATA_INT	IRQ_PF14

 static struct pata_platform_info bfin_pata_platform_data = {
@@ -651,15 +651,15 @@ static struct platform_device *cm_bf537_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
 	&hitachi_fb_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -668,7 +668,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -677,11 +677,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -690,39 +690,39 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 	&isp1362_hcd_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
 	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 	&bfin_pata_device,
 #endif

-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
 	&cm_flash_device,
 #endif
 };

 static int __init net2272_init(void)
 {
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	int ret;

 	ret = gpio_request(GPIO_PG14, "net2272");
@@ -742,11 +742,11 @@ static int __init tcm_bf537_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 	irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
 #endif


--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -33,14 +33,14 @@ const char bfin_board_name[] = "ADI BF538-EZKIT";
 */


-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif	/* CONFIG_RTC_DRV_BFIN */

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -199,7 +199,7 @@ static struct platform_device bfin_uart2_device = {
 #endif	/* CONFIG_SERIAL_BFIN_UART2 */
 #endif	/* CONFIG_SERIAL_BFIN */

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -277,7 +277,7 @@ static struct platform_device bfin_sir2_device = {
 #endif	/* CONFIG_BFIN_SIR2 */
 #endif	/* CONFIG_BFIN_SIR */

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -416,7 +416,7 @@ static struct platform_device bfin_sport3_uart_device = {
 #endif	/* CONFIG_SERIAL_BFIN_SPORT3_UART */
 #endif	/* CONFIG_SERIAL_BFIN_SPORT */

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
 static unsigned short bfin_can_peripherals[] = {
 	P_CAN0_RX, P_CAN0_TX, 0
 };
@@ -458,7 +458,7 @@ static struct platform_device bfin_can_device = {
 *  USB-LAN EzExtender board
 *  Driver needs to know address, irq and flag pin.
 */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -490,10 +490,9 @@ static struct platform_device smc91x_device = {
 };
 #endif	/* CONFIG_SMC91X */

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 /* SPI flash chip (m25p16) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -521,7 +520,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 #endif	/* CONFIG_MTD_M25P80 */
 #endif	/* CONFIG_SPI_BFIN5XX */

-#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
 #include <linux/spi/ad7879.h>
 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.model			= 7879,	/* Model = AD7879 */
@@ -538,7 +537,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 };
 #endif	/* CONFIG_TOUCHSCREEN_AD7879 */

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 #include <asm/bfin-lq035q1.h>

 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
@@ -568,8 +567,7 @@ static struct platform_device bfin_lq035q1_device = {
 #endif	/* CONFIG_FB_BFIN_LQ035Q1 */

 static struct spi_board_info bf538_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -581,7 +579,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif	/* CONFIG_MTD_M25P80 */
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
 	{
 		.modalias = "ad7879",
 		.platform_data = &bfin_ad7879_ts_info,
@@ -592,7 +590,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif	/* CONFIG_TOUCHSCREEN_AD7879_SPI */
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	{
 		.modalias = "bfin-lq035q1-spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -601,7 +599,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif	/* CONFIG_FB_BFIN_LQ035Q1 */
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -717,7 +715,7 @@ static struct platform_device bf538_spi_master2 = {
 		},
 };

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -766,7 +764,7 @@ static struct platform_device i2c_bfin_twi1_device = {
 };
 #endif	/* CONFIG_I2C_BLACKFIN_TWI */

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/gpio_keys.h>

 static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -814,7 +812,7 @@ static struct platform_device bfin_dpmc = {
 	},
 };

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ezkit_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -839,7 +837,7 @@ static struct physmap_flash_data ezkit_flash_data = {

 static struct resource ezkit_flash_resource = {
 	.start = 0x20000000,
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	.end   = 0x202fffff,
 #else
 	.end   = 0x203fffff,
@@ -862,11 +860,11 @@ static struct platform_device *cm_bf538_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -878,18 +876,18 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bf538_spi_master0,
 	&bf538_spi_master1,
 	&bf538_spi_master2,
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi0_device,
 	&i2c_bfin_twi1_device,
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -901,7 +899,7 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -916,23 +914,23 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
 	&bfin_can_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
 	&bfin_lq035q1_device,
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ezkit_flash_device,
 #endif
 };
@@ -942,7 +940,7 @@ static int __init ezkit_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices));

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bf538_spi_board_info,
 			ARRAY_SIZE(bf538_spi_board_info));
 #endif

--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)

 #include <mach/bf54x-lq043.h>

@@ -69,7 +69,7 @@ static struct platform_device bf54x_lq043_device = {
 };
 #endif

-#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
 static unsigned int bf548_keymap[] = {
 	KEYVAL(0, 0, KEY_ENTER),
 	KEYVAL(0, 1, KEY_HELP),
@@ -119,14 +119,14 @@ static struct platform_device bf54x_kpad_device = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -353,7 +353,7 @@ static struct platform_device bfin_uart3_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -456,7 +456,7 @@ static struct platform_device bfin_sir3_device = {
 #endif
 #endif

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 #include <linux/smsc911x.h>

 static struct resource smsc911x_resources[] = {
@@ -491,7 +491,7 @@ static struct platform_device smsc911x_device = {
 };
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 static struct resource musb_resources[] = {
 	[0] = {
 		.start	= 0xFFC03C00,
@@ -553,7 +553,7 @@ static struct platform_device musb_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -692,7 +692,7 @@ static struct platform_device bfin_sport3_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+#if IS_ENABLED(CONFIG_PATA_BF54X)
 static struct resource bfin_atapi_resources[] = {
 	{
 		.start = 0xFFC03800,
@@ -714,7 +714,7 @@ static struct platform_device bfin_atapi_device = {
 };
 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
@@ -760,7 +760,7 @@ static struct platform_device bf5xx_nand_device = {
 };
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
 static struct bfin_sd_host bfin_sdh_data = {
 	.dma_chan = CH_SDH,
 	.irq_int0 = IRQ_SDH_MASK0,
@@ -776,7 +776,7 @@ static struct platform_device bf54x_sdh_device = {
 };
 #endif

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
 static unsigned short bfin_can_peripherals[] = {
 	P_CAN0_RX, P_CAN0_TX, 0
 };
@@ -814,7 +814,7 @@ static struct platform_device bfin_can_device = {
 };
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition para_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -854,10 +854,9 @@ static struct platform_device para_flash_device = {
 };
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 /* SPI flash chip (m25p16) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -884,7 +883,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
 	.vref_delay_usecs	= 50,	/* internal, no capacitor */
@@ -901,8 +900,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 #endif

 static struct spi_board_info bf54x_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -914,7 +912,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 {
 	.modalias		= "ad7877",
 	.platform_data		= &bfin_ad7877_ts_info,
@@ -924,7 +922,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 	.chip_select  		= 2,
 },
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -1006,7 +1004,7 @@ static struct platform_device bf54x_spi_master1 = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -1060,7 +1058,7 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/gpio_keys.h>

 static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -1112,11 +1110,11 @@ static struct platform_device *cm_bf548_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -1131,7 +1129,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -1146,19 +1144,19 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
 	&bf54x_lq043_device,
 #endif

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 	&smsc911x_device,
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 	&musb_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -1173,43 +1171,43 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+#if IS_ENABLED(CONFIG_PATA_BF54X)
 	&bfin_atapi_device,
 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 	&bf5xx_nand_device,
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
 	&bf54x_sdh_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bf54x_spi_master0,
 	&bf54x_spi_master1,
 #endif

-#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
 	&bf54x_kpad_device,
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi0_device,
 #if !defined(CONFIG_BF542)
 	&i2c_bfin_twi1_device,
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&para_flash_device,
 #endif

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
 	&bfin_can_device,
 #endif

@@ -1220,7 +1218,7 @@ static int __init cm_bf548_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bf54x_spi_board_info,
 			ARRAY_SIZE(bf54x_spi_board_info));
 #endif

--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -41,7 +41,7 @@ const char bfin_board_name[] = "ADI BF548-EZKIT";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 #include <linux/usb/isp1760.h>
 static struct resource bfin_isp1760_resources[] = {
 	[0] = {
@@ -76,7 +76,7 @@ static struct platform_device bfin_isp1760_device = {
 };
 #endif

-#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)

 #include <mach/bf54x-lq043.h>

@@ -108,7 +108,7 @@ static struct platform_device bf54x_lq043_device = {
 };
 #endif

-#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
 static const unsigned int bf548_keymap[] = {
 	KEYVAL(0, 0, KEY_ENTER),
 	KEYVAL(0, 1, KEY_HELP),
@@ -158,7 +158,7 @@ static struct platform_device bf54x_kpad_device = {
 };
 #endif

-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 #include <asm/bfin_rotary.h>

 static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -190,7 +190,7 @@ static struct platform_device bfin_rotary_device = {
 };
 #endif

-#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
 #include <linux/input/adxl34x.h>
 static const struct adxl34x_platform_data adxl34x_info = {
 	.x_axis_offset = 0,
@@ -229,14 +229,14 @@ static const struct adxl34x_platform_data adxl34x_info = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -491,7 +491,7 @@ static struct platform_device bfin_uart3_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -594,7 +594,7 @@ static struct platform_device bfin_sir3_device = {
 #endif
 #endif

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 #include <linux/smsc911x.h>

 static struct resource smsc911x_resources[] = {
@@ -629,7 +629,7 @@ static struct platform_device smsc911x_device = {
 };
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 static struct resource musb_resources[] = {
 	[0] = {
 		.start	= 0xFFC03C00,
@@ -691,7 +691,7 @@ static struct platform_device musb_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -830,7 +830,7 @@ static struct platform_device bfin_sport3_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)

 static unsigned short bfin_can0_peripherals[] = {
 	P_CAN0_RX, P_CAN0_TX, 0
@@ -908,7 +908,7 @@ static struct platform_device bfin_can1_device = {

 #endif

-#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+#if IS_ENABLED(CONFIG_PATA_BF54X)
 static struct resource bfin_atapi_resources[] = {
 	{
 		.start = 0xFFC03800,
@@ -930,7 +930,7 @@ static struct platform_device bfin_atapi_device = {
 };
 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 static struct mtd_partition partition_info[] = {
 	{
 		.name = "bootloader(nand)",
@@ -980,7 +980,7 @@ static struct platform_device bf5xx_nand_device = {
 };
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)

 static struct bfin_sd_host bfin_sdh_data = {
 	.dma_chan = CH_SDH,
@@ -997,7 +997,7 @@ static struct platform_device bf54x_sdh_device = {
 };
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ezkit_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -1045,8 +1045,7 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 /* SPI flash chip (m25p16) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -1073,7 +1072,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
 	.vref_delay_usecs	= 50,	/* internal, no capacitor */
@@ -1495,8 +1494,7 @@ static struct platform_device bfin_gpj_device = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -1508,8 +1506,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -1517,7 +1514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
@@ -1527,7 +1524,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select		= MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -1535,7 +1532,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */
 	},
 #endif
-#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
 	{
 		.modalias		= "adxl34x",
 		.platform_data		= &adxl34x_info,
@@ -1547,7 +1544,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 };
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -1620,8 +1617,7 @@ static struct platform_device bf54x_spi_master1 = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 #include <linux/videodev2.h>
 #include <media/blackfin/bfin_capture.h>
 #include <media/blackfin/ppi.h>
@@ -1641,8 +1637,7 @@ static const struct ppi_info ppi_info = {
 	.pin_req = ppi_req,
 };

-#if defined(CONFIG_VIDEO_VS6624) \
-	|| defined(CONFIG_VIDEO_VS6624_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
 static struct v4l2_input vs6624_inputs[] = {
 	{
 		.index = 0,
@@ -1687,7 +1682,7 @@ static struct platform_device bfin_capture_device = {
 };
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -1742,7 +1737,7 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
 	{
 		I2C_BOARD_INFO("ssm2602", 0x1b),
 	},
@@ -1751,25 +1746,25 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {

 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = 212,
 	},
 #endif
-#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
 	{
 		I2C_BOARD_INFO("adxl34x", 0x53),
 		.irq = IRQ_PC5,
 		.platform_data = (void *)&adxl34x_info,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
 	{
 		I2C_BOARD_INFO("ad5252", 0x2f),
 	},
@@ -1777,7 +1772,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 };
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/gpio_keys.h>

 static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -1828,8 +1823,8 @@ static struct platform_device bfin_dpmc = {
 	},
 };

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
-	defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+	IS_ENABLED(CONFIG_SND_BF5XX_AC97)

 #define SPORT_REQ(x) \
 	[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
@@ -1889,35 +1884,35 @@ static struct resource bfin_snd_resources[][4] = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s_pcm = {
 	.name = "bfin-i2s-pcm-audio",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 static struct platform_device bfin_ac97_pcm = {
 	.name = "bfin-ac97-pcm-audio",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
 static struct platform_device bfin_ad73311_codec_device = {
 	.name = "ad73311",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980)
 static struct platform_device bfin_ad1980_codec_device = {
 	.name = "ad1980",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -1929,7 +1924,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
 static struct platform_device bfin_ac97 = {
 	.name = "bfin-ac97",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -1962,11 +1957,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_gpj_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -1981,7 +1976,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -1996,23 +1991,23 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
 	&bf54x_lq043_device,
 #endif

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 	&smsc911x_device,
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 	&musb_device,
 #endif

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 	&bfin_isp1760_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -2027,72 +2022,71 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
 	&bfin_can0_device,
 	&bfin_can1_device,
 #endif

-#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+#if IS_ENABLED(CONFIG_PATA_BF54X)
 	&bfin_atapi_device,
 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 	&bf5xx_nand_device,
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
 	&bf54x_sdh_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bf54x_spi_master0,
 	&bf54x_spi_master1,
 #endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 	&bfin_capture_device,
 #endif

-#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
 	&bf54x_kpad_device,
 #endif

-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 	&bfin_rotary_device,
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi0_device,
 #if !defined(CONFIG_BF542)
 	&i2c_bfin_twi1_device,
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ezkit_flash_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s_pcm,
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 	&bfin_ac97_pcm,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980)
 	&bfin_ad1980_codec_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s,
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 	&bfin_ac97,
 #endif
 };

--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -601,36 +601,6 @@
 #define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
 #define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */

-/* Bit masks for HOST_CONTROL */
-
-#define                   HOST_EN  0x1        /* Host Enable */
-#define                  HOST_END  0x2        /* Host Endianess */
-#define                 DATA_SIZE  0x4        /* Data Size */
-#define                  HOST_RST  0x8        /* Host Reset */
-#define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                       EHW  0x100      /* Enable Host Write */
-#define                       EHR  0x200      /* Enable Host Read */
-#define                       BDR  0x400      /* Burst DMA Requests */
-
-/* Bit masks for HOST_STATUS */
-
-#define                 DMA_READY  0x1        /* DMA Ready */
-#define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define              DMA_COMPLETE  0x8        /* DMA Complete */
-#define                      HSHK  0x10       /* Host Handshake */
-#define                 HSTIMEOUT  0x20       /* Host Timeout */
-#define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define                   DMA_DIR  0x100      /* DMA Direction */
-#define                       BTE  0x200      /* Bus Timeout Enabled */
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
-
 /* Bit masks for TIMER_ENABLE1 */

 #define                    TIMEN8  0x1        /* Timer 8 Enable */

--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -581,36 +581,6 @@
 #define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
 #define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */

-/* Bit masks for HOST_CONTROL */
-
-#define                   HOST_EN  0x1        /* Host Enable */
-#define                  HOST_END  0x2        /* Host Endianess */
-#define                 DATA_SIZE  0x4        /* Data Size */
-#define                  HOST_RST  0x8        /* Host Reset */
-#define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                       EHW  0x100      /* Enable Host Write */
-#define                       EHR  0x200      /* Enable Host Read */
-#define                       BDR  0x400      /* Burst DMA Requests */
-
-/* Bit masks for HOST_STATUS */
-
-#define                 DMA_READY  0x1        /* DMA Ready */
-#define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define              DMA_COMPLETE  0x8        /* DMA Complete */
-#define                      HSHK  0x10       /* Host Handshake */
-#define                 HSTIMEOUT  0x20       /* Host Timeout */
-#define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define                   DMA_DIR  0x100      /* DMA Direction */
-#define                       BTE  0x200      /* Bus Timeout Enabled */
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
-
 /* Bit masks for KPAD_CTL */

 #define                   KPAD_EN  0x1        /* Keypad Enable */

--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -60,7 +60,7 @@
 */
 const char bfin_board_name[] = "Acvilon board";

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 #include <linux/usb/isp1760.h>
 static struct resource bfin_isp1760_resources[] = {
 	[0] = {
@@ -137,7 +137,7 @@ static struct i2c_board_info acvilon_i2c_devs[] __initdata = {
 	 },
 };

-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
 static struct platdata_mtd_ram mtd_ram_data = {
 	.mapname = "rootfs(RAM)",
 	.bankwidth = 4,
@@ -160,7 +160,7 @@ static struct platform_device mtd_ram_device = {
 };
 #endif

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 #include <linux/smsc911x.h>
 static struct resource smsc911x_resources[] = {
 	{
@@ -194,7 +194,7 @@ static struct platform_device smsc911x_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -246,7 +246,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)

 static struct mtd_partition bfin_plat_nand_partitions[] = {
 	{
@@ -323,7 +323,7 @@ static void bfin_plat_nand_init(void)
 }
 #endif

-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
 	{
 	 .name = "bootloader",
@@ -369,7 +369,7 @@ static struct bfin5xx_spi_chip data_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -408,7 +408,7 @@ static struct platform_device bfin_spi0_device = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 	 .modalias = "spidev",
 	 .max_speed_hz = 3125000,	/* max spi clock (SCK) speed in HZ */
@@ -416,7 +416,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	 .chip_select = 3,
 	 },
 #endif
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
 	{			/* DataFlash chip */
 	 .modalias = "mtd_dataflash",
 	 .max_speed_hz = 33250000,	/* max spi clock (SCK) speed in HZ */
@@ -472,11 +472,11 @@ static struct platform_device bfin_dpmc = {
 static struct platform_device *acvilon_devices[] __initdata = {
 	&bfin_dpmc,

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -484,17 +484,17 @@ static struct platform_device *acvilon_devices[] __initdata = {

 	&bfin_gpios_device,

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 	&smsc911x_device,
 #endif

 	&bfin_i2c_pca_device,

-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
 	&bfin_async_nand_device,
 #endif

-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
 	&mtd_ram_device,
 #endif


--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 #endif
 #include <linux/ata_platform.h>
@@ -29,10 +29,10 @@
 */
 const char bfin_board_name[] = "Bluetechnix CM BF561";

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* all SPI peripherals info goes here */

-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
@@ -64,7 +64,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -77,7 +77,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -85,7 +85,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select = 4,
 	},
 #endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
@@ -134,14 +134,14 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */


-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
 static struct platform_device hitachi_fb_device = {
 	.name = "hitachi-tx09",
 };
 #endif


-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -173,7 +173,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 #include <linux/smsc911x.h>

 static struct resource smsc911x_resources[] = {
@@ -208,7 +208,7 @@ static struct platform_device smsc911x_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x24000000,
@@ -229,7 +229,7 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 static struct resource isp1362_hcd_resources[] = {
 	{
 		.start = 0x24008000,
@@ -268,7 +268,7 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -319,7 +319,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -348,7 +348,7 @@ static struct platform_device bfin_sir0_device = {
 #endif
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 #define PATA_INT	IRQ_PF46

 static struct pata_platform_info bfin_pata_platform_data = {
@@ -385,7 +385,7 @@ static struct platform_device bfin_pata_device = {
 };
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition para_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -456,54 +456,54 @@ static struct platform_device *cm_bf561_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
 	&hitachi_fb_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 	&isp1362_hcd_device,
 #endif

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 	&smsc911x_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 	&bfin_pata_device,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&para_flash_device,
 #endif
 };

 static int __init net2272_init(void)
 {
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	int ret;

 	ret = gpio_request(GPIO_PF46, "net2272");
@@ -523,11 +523,11 @@ static int __init cm_bf561_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif

-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
 	irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
 #endif


--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -25,7 +25,7 @@
 */
 const char bfin_board_name[] = "ADI BF561-EZKIT";

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 #include <linux/usb/isp1760.h>
 static struct resource bfin_isp1760_resources[] = {
 	[0] = {
@@ -60,7 +60,7 @@ static struct platform_device bfin_isp1760_device = {
 };
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>

 static struct resource isp1362_hcd_resources[] = {
@@ -101,7 +101,7 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x2C000000,
@@ -129,7 +129,7 @@ static struct platform_device net2272_bfin_device = {
 *  USB-LAN EzExtender board
 *  Driver needs to know address, irq and flag pin.
 */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>

 static struct smc91x_platdata smc91x_info = {
@@ -163,7 +163,7 @@ static struct platform_device smc91x_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -214,7 +214,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -243,7 +243,7 @@ static struct platform_device bfin_sir0_device = {
 #endif
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ezkit_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -291,7 +291,7 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -330,8 +330,7 @@ static struct platform_device bfin_spi0_device = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -341,7 +340,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -351,7 +350,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

@@ -375,7 +374,7 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif

-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 #include <linux/i2c-gpio.h>

 static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -422,8 +421,7 @@ static struct platform_device bfin_dpmc = {
 	},
 };

-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 #include <linux/videodev2.h>
 #include <media/blackfin/bfin_capture.h>
 #include <media/blackfin/ppi.h>
@@ -443,8 +441,7 @@ static const struct ppi_info ppi_info = {
 	.pin_req = ppi_req,
 };

-#if defined(CONFIG_VIDEO_ADV7183) \
-	|| defined(CONFIG_VIDEO_ADV7183_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_ADV7183)
 #include <media/adv7183.h>
 static struct v4l2_input adv7183_inputs[] = {
 	{
@@ -515,7 +512,7 @@ static struct platform_device bfin_capture_device = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -523,7 +520,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 static struct platform_device bfin_ac97 = {
 	.name = "bfin-ac97",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -531,8 +528,7 @@ static struct platform_device bfin_ac97 = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	        || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 static const char * const ad1836_link[] = {
 	"bfin-i2s.0",
 	"spi0.4",
@@ -550,72 +546,70 @@ static struct platform_device *ezkit_devices[] __initdata = {

 	&bfin_dpmc,

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif

-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 	&bfin_isp1760_device,
 #endif

-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 	&i2c_gpio_device,
 #endif

-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 	&isp1362_hcd_device,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ezkit_flash_device,
 #endif

-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 	&bfin_capture_device,
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s,
 #endif

-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 	&bfin_ac97,
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
-	defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 	&bfin_ad1836_machine,
 #endif
 };

 static int __init net2272_init(void)
 {
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	int ret;

 	ret = gpio_request(GPIO_PF11, "net2272");
@@ -641,12 +635,12 @@ static int __init ezkit_init(void)
 	if (ret < 0)
 		return ret;

-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
 	SSYNC();
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15));
 	bfin_write_FIO0_FLAG_S(1 << 15);
 	SSYNC();

--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -42,7 +42,7 @@ static struct platform_device smc91x_device = {
 	.resource      = smc91x_resources,
 };

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -93,7 +93,7 @@ static struct platform_device bfin_uart0_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -125,13 +125,13 @@ static struct platform_device bfin_sir0_device = {
 static struct platform_device *tepla_devices[] __initdata = {
 	&smc91x_device,

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif

--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -39,7 +39,7 @@ const char bfin_board_name[] = "ADI BF609-EZKIT";
 *  Driver needs to know address, irq and flag pin.
 */

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 #include <linux/usb/isp1760.h>
 static struct resource bfin_isp1760_resources[] = {
 	[0] = {
@@ -74,7 +74,7 @@ static struct platform_device bfin_isp1760_device = {
 };
 #endif

-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 #include <asm/bfin_rotary.h>

 static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -105,7 +105,7 @@ static struct platform_device bfin_rotary_device = {
 };
 #endif

-#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
+#if IS_ENABLED(CONFIG_STMMAC_ETH)
 #include <linux/stmmac.h>
 #include <linux/phy.h>

@@ -159,7 +159,7 @@ static struct platform_device bfin_eth_device = {
 };
 #endif

-#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
 #include <linux/input/adxl34x.h>
 static const struct adxl34x_platform_data adxl34x_info = {
 	.x_axis_offset = 0,
@@ -198,14 +198,14 @@ static const struct adxl34x_platform_data adxl34x_info = {
 };
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -355,7 +355,7 @@ static struct platform_device bfin_uart1_device = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -408,7 +408,7 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 static struct resource musb_resources[] = {
 	[0] = {
 		.start	= 0xFFCC1000,
@@ -464,7 +464,7 @@ static struct platform_device musb_device = {
 };
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 static struct resource bfin_sport0_uart_resources[] = {
 	{
@@ -569,7 +569,7 @@ static struct platform_device bfin_sport2_uart_device = {
 #endif
 #endif

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)

 static unsigned short bfin_can0_peripherals[] = {
 	P_CAN0_RX, P_CAN0_TX, 0
@@ -610,7 +610,7 @@ static struct platform_device bfin_can0_device = {

 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 static struct mtd_partition partition_info[] = {
 	{
 		.name = "bootloader(nand)",
@@ -660,7 +660,7 @@ static struct platform_device bfin_nand_device = {
 };
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)

 static struct bfin_sd_host bfin_sdh_data = {
 	.dma_chan = CH_RSI,
@@ -677,7 +677,7 @@ static struct platform_device bfin_sdh_device = {
 };
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ezkit_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -741,8 +741,7 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif

-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 /* SPI flash chip (w25q32) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -773,21 +772,20 @@ static struct bfin_spi3_chip spi_flash_chip_info = {
 };
 #endif

-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 static struct bfin_spi3_chip spidev_chip_info = {
 	.enable_dma = true,
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s_pcm = {
 	.name = "bfin-i2s-pcm-audio",
 	.id = -1,
 };
 #endif

-#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \
-	defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
 #include <asm/bfin_sport3.h>
 static struct resource bfin_snd_resources[] = {
 	{
@@ -841,8 +839,7 @@ static struct platform_device bfin_i2s = {
 };
 #endif

-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	        || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 static const char * const ad1836_link[] = {
 	"bfin-i2s.0",
 	"spi0.76",
@@ -856,14 +853,13 @@ static struct platform_device bfin_ad1836_machine = {
 };
 #endif

-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \
-	defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
 static struct platform_device adau1761_device = {
 	.name = "bfin-eval-adau1x61",
 };
 #endif

-#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
 #include <sound/adau17x1.h>
 static struct adau1761_platform_data adau1761_info = {
 	.lineout_mode = ADAU1761_OUTPUT_MODE_LINE,
@@ -871,8 +867,7 @@ static struct adau1761_platform_data adau1761_info = {
 };
 #endif

-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 #include <linux/videodev2.h>
 #include <media/blackfin/bfin_capture.h>
 #include <media/blackfin/ppi.h>
@@ -882,7 +877,7 @@ static const unsigned short ppi_req[] = {
 	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
 	P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
 	P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
-#if !defined(CONFIG_VIDEO_VS6624) && !defined(CONFIG_VIDEO_VS6624_MODULE)
+#if !IS_ENABLED(CONFIG_VIDEO_VS6624)
 	P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
 	P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
 #endif
@@ -898,8 +893,7 @@ static const struct ppi_info ppi_info = {
 	.pin_req = ppi_req,
 };

-#if defined(CONFIG_VIDEO_VS6624) \
-	|| defined(CONFIG_VIDEO_VS6624_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
 static struct v4l2_input vs6624_inputs[] = {
 	{
 		.index = 0,
@@ -936,8 +930,7 @@ static struct bfin_capture_config bfin_capture_data = {
 };
 #endif

-#if defined(CONFIG_VIDEO_ADV7842) \
-	|| defined(CONFIG_VIDEO_ADV7842_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_ADV7842)
 #include <media/adv7842.h>

 static struct v4l2_input adv7842_inputs[] = {
@@ -1067,8 +1060,7 @@ static struct platform_device bfin_capture_device = {
 };
 #endif

-#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
 #include <linux/videodev2.h>
 #include <media/blackfin/bfin_display.h>
 #include <media/blackfin/ppi.h>
@@ -1090,8 +1082,7 @@ static const struct ppi_info ppi_info = {
 	.pin_req = ppi_req_disp,
 };

-#if defined(CONFIG_VIDEO_ADV7511) \
-	|| defined(CONFIG_VIDEO_ADV7511_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_ADV7511)
 #include <media/adv7511.h>

 static struct v4l2_output adv7511_outputs[] = {
@@ -1313,7 +1304,7 @@ static struct platform_device bfin_crypto_crc_device = {
 };
 #endif

-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.model			= 7877,
 	.vref_delay_usecs	= 50,	/* internal, no capacitor */
@@ -1679,7 +1670,7 @@ static struct platform_device bfin_gpg_device = {

 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

@@ -1702,8 +1693,7 @@ static struct platform_device bfin_device_gpiokeys = {
 #endif

 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
 	{
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -1715,7 +1705,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
 	{
 		.modalias		= "ad7877",
 		.platform_data		= &bfin_ad7877_ts_info,
@@ -1725,7 +1715,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.chip_select		= MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -1734,7 +1724,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
-#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
 	{
 		.modalias		= "adxl34x",
 		.platform_data		= &adxl34x_info,
@@ -1818,7 +1808,7 @@ static struct platform_device bf60x_spi_master1 = {
 };
 #endif  /* spi master and devices */

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};

 static struct resource bfin_twi0_resource[] = {
@@ -1871,20 +1861,20 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif

 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
-#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
 	{
 		I2C_BOARD_INFO("adxl34x", 0x53),
 		.irq = IRQ_PC5,
 		.platform_data = (void *)&adxl34x_info,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
 	{
 		I2C_BOARD_INFO("adau1761", 0x38),
 		.platform_data = (void *)&adau1761_info
 	},
 #endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
 	{
 		I2C_BOARD_INFO("ssm2602", 0x1b),
 	},
@@ -1942,11 +1932,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_gpg_device,
 #endif

-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
 	&rtc_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
@@ -1955,7 +1945,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
@@ -1964,19 +1954,19 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
+#if IS_ENABLED(CONFIG_STMMAC_ETH)
 	&bfin_eth_device,
 #endif

-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 	&musb_device,
 #endif

-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 	&bfin_isp1760_device,
 #endif

-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
 #endif
@@ -1988,15 +1978,15 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 #endif

-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
 	&bfin_can0_device,
 #endif

-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
 	&bfin_nand_device,
 #endif

-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
 	&bfin_sdh_device,
 #endif

@@ -2005,11 +1995,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bf60x_spi_master1,
 #endif

-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
 	&bfin_rotary_device,
 #endif

-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
 	&i2c_bfin_twi0_device,
 #if !defined(CONFIG_BF542)
 	&i2c_bfin_twi1_device,
@@ -2024,34 +2014,29 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_crypto_crc_device,
 #endif

-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif

-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ezkit_flash_device,
 #endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s_pcm,
 #endif
-#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \
-	defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
 	&bfin_i2s,
 #endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
-	defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 	&bfin_ad1836_machine,
 #endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \
-	defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
 	&adau1761_device,
 #endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 	&bfin_capture_device,
 #endif
-#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
 	&bfin_display_device,
 #endif

@@ -2075,9 +2060,9 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0",  "pinctrl-adi2.0", NULL, "smc0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2",  "pinctrl-adi2.0", NULL, "ppi2_16b"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0",  "pinctrl-adi2.0", NULL, "ppi0_16b"),
-#if defined(CONFIG_VIDEO_MT9M114) || defined(CONFIG_VIDEO_MT9M114_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_MT9M114)
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0",  "pinctrl-adi2.0", NULL, "ppi0_8b"),
-#elif defined(CONFIG_VIDEO_VS6624) || defined(CONFIG_VIDEO_VS6624_MODULE)
+#elif IS_ENABLED(CONFIG_VIDEO_VS6624)
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0",  "pinctrl-adi2.0", NULL, "ppi0_16b"),
 #else
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0",  "pinctrl-adi2.0", NULL, "ppi0_24b"),

--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -73,24 +73,6 @@ static void clk_reg_write_mask(u32 reg, uint32_t val, uint32_t mask)
 	bfin_write32(reg, val2);
 }

-static void clk_reg_set_bits(u32 reg, uint32_t mask)
-{
-	u32 val;
-
-	val = bfin_read32(reg);
-	val |= mask;
-	bfin_write32(reg, val);
-}
-
-static void clk_reg_clear_bits(u32 reg, uint32_t mask)
-{
-	u32 val;
-
-	val = bfin_read32(reg);
-	val &= ~mask;
-	bfin_write32(reg, val);
-}
-
 int wait_for_pll_align(void)
 {
 	int i = 10000;

--- a/arch/blackfin/mach-bf609/pm.c
+++ b/arch/blackfin/mach-bf609/pm.c
@@ -210,7 +210,7 @@ void bf609_cpu_pm_enter(suspend_state_t state)

 #ifdef CONFIG_PM_BFIN_WAKE_PB15
 	wakeup |= PB15WE;
-# if CONFIG_PM_BFIN_WAKE_PA15_POL
+# if CONFIG_PM_BFIN_WAKE_PB15_POL
 	wakeup_pol |= PB15WE;
 # endif
 #endif