Commit fdf9c17b authored by Kunihiko Hayashi's avatar Kunihiko Hayashi Committed by Masahiro Yamada

arm64: dts: uniphier: Set SCSSI clock and reset IDs for each channel

Currently common clock and reset IDs were used, however, each clock and
reset ID should be used for each channel.

Fixes: 925c5c32 ("arm64: dts: uniphier: add SPI node for LD20, LD11 and PXs3")
Signed-off-by: default avatarKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent 4b7d3743
...@@ -143,8 +143,8 @@ spi1: spi@54006100 { ...@@ -143,8 +143,8 @@ spi1: spi@54006100 {
interrupts = <0 216 4>; interrupts = <0 216 4>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>; pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 11>; clocks = <&peri_clk 12>;
resets = <&peri_rst 11>; resets = <&peri_rst 12>;
}; };
serial0: serial@54006800 { serial0: serial@54006800 {
......
...@@ -248,8 +248,8 @@ spi1: spi@54006100 { ...@@ -248,8 +248,8 @@ spi1: spi@54006100 {
interrupts = <0 216 4>; interrupts = <0 216 4>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>; pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 11>; clocks = <&peri_clk 12>;
resets = <&peri_rst 11>; resets = <&peri_rst 12>;
}; };
spi2: spi@54006200 { spi2: spi@54006200 {
...@@ -259,8 +259,8 @@ spi2: spi@54006200 { ...@@ -259,8 +259,8 @@ spi2: spi@54006200 {
interrupts = <0 229 4>; interrupts = <0 229 4>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>; pinctrl-0 = <&pinctrl_spi2>;
clocks = <&peri_clk 11>; clocks = <&peri_clk 13>;
resets = <&peri_rst 11>; resets = <&peri_rst 13>;
}; };
spi3: spi@54006300 { spi3: spi@54006300 {
...@@ -270,8 +270,8 @@ spi3: spi@54006300 { ...@@ -270,8 +270,8 @@ spi3: spi@54006300 {
interrupts = <0 230 4>; interrupts = <0 230 4>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi3>; pinctrl-0 = <&pinctrl_spi3>;
clocks = <&peri_clk 11>; clocks = <&peri_clk 14>;
resets = <&peri_rst 11>; resets = <&peri_rst 14>;
}; };
serial0: serial@54006800 { serial0: serial@54006800 {
......
...@@ -207,8 +207,8 @@ spi1: spi@54006100 { ...@@ -207,8 +207,8 @@ spi1: spi@54006100 {
interrupts = <0 216 4>; interrupts = <0 216 4>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>; pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 11>; clocks = <&peri_clk 12>;
resets = <&peri_rst 11>; resets = <&peri_rst 12>;
}; };
serial0: serial@54006800 { serial0: serial@54006800 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment