Commit fe4266ba authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx6sx: Add 198MHz operating point

198MHz is a valid operating point for mx6sx.

Add entries for VDD_ARM_CAP and VDD_SOC_CAP voltages for 198MHz according
to the imx6sx datahseet:
http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6SXIEC.pdf

(a 25mV offset is added to the minimum allowed values for safety).

These values also match the ones from the NXP kernel.
Signed-off-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent f7084446
...@@ -63,12 +63,14 @@ cpu0: cpu@0 { ...@@ -63,12 +63,14 @@ cpu0: cpu@0 {
996000 1250000 996000 1250000
792000 1175000 792000 1175000
396000 1075000 396000 1075000
198000 975000
>; >;
fsl,soc-operating-points = < fsl,soc-operating-points = <
/* ARM kHz SOC uV */ /* ARM kHz SOC uV */
996000 1175000 996000 1175000
792000 1175000 792000 1175000
396000 1175000 396000 1175000
198000 1175000
>; >;
clock-latency = <61036>; /* two CLK32 periods */ clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX6SX_CLK_ARM>, clocks = <&clks IMX6SX_CLK_ARM>,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment