Commit ff7bf02f authored by Timur Tabi's avatar Timur Tabi Committed by Mark Brown

ASoC: fix documentation in CS4270 codec driver

Spruce up the documentation in the CS4270 codec.  Use kerneldoc where
appropriate.  Fix incorrect comments.
Signed-off-by: default avatarTimur Tabi <timur@freescale.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 04eb093c
......@@ -3,10 +3,10 @@
*
* Author: Timur Tabi <timur@freescale.com>
*
* Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
* Copyright 2007-2009 Freescale Semiconductor, Inc. This file is licensed
* under the terms of the GNU General Public License version 2. This
* program is licensed "as is" without any warranty of any kind, whether
* express or implied.
*
* This is an ASoC device driver for the Cirrus Logic CS4270 codec.
*
......@@ -111,8 +111,13 @@ struct cs4270_private {
unsigned int mode; /* The mode (I2S or left-justified) */
};
/*
* Clock Ratio Selection for Master Mode with I2C enabled
/**
* struct cs4270_mode_ratios - clock ratio tables
* @ratio: the ratio of MCLK to the sample rate
* @speed_mode: the Speed Mode bits to set in the Mode Control register for
* this ratio
* @mclk: the Ratio Select bits to set in the Mode Control register for this
* ratio
*
* The data for this chart is taken from Table 5 of the CS4270 reference
* manual.
......@@ -121,31 +126,30 @@ struct cs4270_private {
* It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling
* rates the CS4270 currently supports.
*
* Each element in this array corresponds to the ratios in mclk_ratios[].
* These two arrays need to be in sync.
*
* 'speed_mode' is the corresponding bit pattern to be written to the
* @speed_mode is the corresponding bit pattern to be written to the
* MODE bits of the Mode Control Register
*
* 'mclk' is the corresponding bit pattern to be wirten to the MCLK bits of
* @mclk is the corresponding bit pattern to be wirten to the MCLK bits of
* the Mode Control Register.
*
* In situations where a single ratio is represented by multiple speed
* modes, we favor the slowest speed. E.g, for a ratio of 128, we pick
* double-speed instead of quad-speed. However, the CS4270 errata states
* that Divide-By-1.5 can cause failures, so we avoid that mode where
* that divide-By-1.5 can cause failures, so we avoid that mode where
* possible.
*
* ERRATA: There is an errata for the CS4270 where divide-by-1.5 does not
* work if VD = 3.3V. If this effects you, select the
* Errata: There is an errata for the CS4270 where divide-by-1.5 does not
* work if Vd is 3.3V. If this effects you, select the
* CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will
* never select any sample rates that require divide-by-1.5.
*/
static struct {
struct cs4270_mode_ratios {
unsigned int ratio;
u8 speed_mode;
u8 mclk;
} cs4270_mode_ratios[] = {
};
static struct cs4270_mode_ratios[] = {
{64, CS4270_MODE_4X, CS4270_MODE_DIV1},
#ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA
{96, CS4270_MODE_4X, CS4270_MODE_DIV15},
......@@ -162,34 +166,27 @@ static struct {
/* The number of MCLK/LRCK ratios supported by the CS4270 */
#define NUM_MCLK_RATIOS ARRAY_SIZE(cs4270_mode_ratios)
/*
* Determine the CS4270 samples rates.
/**
* cs4270_set_dai_sysclk - determine the CS4270 samples rates.
* @codec_dai: the codec DAI
* @clk_id: the clock ID (ignored)
* @freq: the MCLK input frequency
* @dir: the clock direction (ignored)
*
* 'freq' is the input frequency to MCLK. The other parameters are ignored.
* This function is used to tell the codec driver what the input MCLK
* frequency is.
*
* The value of MCLK is used to determine which sample rates are supported
* by the CS4270. The ratio of MCLK / Fs must be equal to one of nine
* support values: 64, 96, 128, 192, 256, 384, 512, 768, and 1024.
* supported values - 64, 96, 128, 192, 256, 384, 512, 768, and 1024.
*
* This function calculates the nine ratios and determines which ones match
* a standard sample rate. If there's a match, then it is added to the list
* of support sample rates.
* of supported sample rates.
*
* This function must be called by the machine driver's 'startup' function,
* otherwise the list of supported sample rates will not be available in
* time for ALSA.
*
* Note that in stand-alone mode, the sample rate is determined by input
* pins M0, M1, MDIV1, and MDIV2. Also in stand-alone mode, divide-by-3
* is not a programmable option. However, divide-by-3 is not an available
* option in stand-alone mode. This cases two problems: a ratio of 768 is
* not available (it requires divide-by-3) and B) ratios 192 and 384 can
* only be selected with divide-by-1.5, but there is an errate that make
* this selection difficult.
*
* In addition, there is no mechanism for communicating with the machine
* driver what the input settings can be. This would need to be implemented
* for stand-alone mode to work.
*/
static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
......@@ -230,8 +227,10 @@ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai,
return 0;
}
/*
* Configure the codec for the selected audio format
/**
* cs4270_set_dai_fmt - configure the codec for the selected audio format
* @codec_dai: the codec DAI
* @format: a SND_SOC_DAIFMT_x value indicating the data format
*
* This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the
* codec accordingly.
......@@ -261,8 +260,16 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai,
return ret;
}
/*
* Pre-fill the CS4270 register cache.
/**
* cs4270_fill_cache - pre-fill the CS4270 register cache.
* @codec: the codec for this CS4270
*
* This function fills in the CS4270 register cache by reading the register
* values from the hardware.
*
* This CS4270 registers are cached to avoid excessive I2C I/O operations.
* After the initial read to pre-fill the cache, the CS4270 never updates
* the register values, so we won't have a cache coherency problem.
*
* We use the auto-increment feature of the CS4270 to read all registers in
* one shot.
......@@ -285,12 +292,17 @@ static int cs4270_fill_cache(struct snd_soc_codec *codec)
return 0;
}
/*
* Read from the CS4270 register cache.
/**
* cs4270_read_reg_cache - read from the CS4270 register cache.
* @codec: the codec for this CS4270
* @reg: the register to read
*
* This function returns the value for a given register. It reads only from
* the register cache, not the hardware itself.
*
* This CS4270 registers are cached to avoid excessive I2C I/O operations.
* After the initial read to pre-fill the cache, the CS4270 never updates
* the register values, so we won't have a cache coherncy problem.
* the register values, so we won't have a cache coherency problem.
*/
static unsigned int cs4270_read_reg_cache(struct snd_soc_codec *codec,
unsigned int reg)
......@@ -303,8 +315,11 @@ static unsigned int cs4270_read_reg_cache(struct snd_soc_codec *codec,
return cache[reg - CS4270_FIRSTREG];
}
/*
* Write to a CS4270 register via the I2C bus.
/**
* cs4270_i2c_write - write to a CS4270 register via the I2C bus.
* @codec: the codec for this CS4270
* @reg: the register to write
* @value: the value to write to the register
*
* This function writes the given value to the given CS4270 register, and
* also updates the register cache.
......@@ -336,11 +351,17 @@ static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg,
return 0;
}
/*
* Program the CS4270 with the given hardware parameters.
/**
* cs4270_hw_params - program the CS4270 with the given hardware parameters.
* @substream: the audio stream
* @params: the hardware parameters to set
* @dai: the SOC DAI (ignored)
*
* The .ops functions are used to provide board-specific data, like
* input frequencies, to this driver. This function takes that information,
* This function programs the hardware with the values provided.
* Specifically, the sample rate and the data format.
*
* The .ops functions are used to provide board-specific data, like input
* frequencies, to this driver. This function takes that information,
* combines it with the hardware parameters provided, and programs the
* hardware accordingly.
*/
......@@ -455,8 +476,10 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream,
}
#ifdef CONFIG_SND_SOC_CS4270_HWMUTE
/*
* Set the CS4270 external mute
/**
* cs4270_mute - enable/disable the CS4270 external mute
* @dai: the SOC DAI
* @mute: 0 = disable mute, 1 = enable mute
*
* This function toggles the mute bits in the MUTE register. The CS4270's
* mute capability is intended for external muting circuitry, so if the
......@@ -490,7 +513,7 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = {
};
/*
* Global variable to store codec for the ASoC probe function.
* cs4270_codec - global variable to store codec for the ASoC probe function
*
* If struct i2c_driver had a private_data field, we wouldn't need to use
* cs4270_codec. This is the only way to pass the codec structure from
......@@ -527,8 +550,12 @@ struct snd_soc_dai cs4270_dai = {
};
EXPORT_SYMBOL_GPL(cs4270_dai);
/*
* ASoC probe function
/**
* cs4270_probe - ASoC probe function
* @pdev: platform device
*
* This function is called when ASoC has all the pieces it needs to
* instantiate a sound driver.
*/
static int cs4270_probe(struct platform_device *pdev)
{
......@@ -582,6 +609,12 @@ static int cs4270_probe(struct platform_device *pdev)
return ret;
}
/**
* cs4270_remove - ASoC remove function
* @pdev: platform device
*
* This function is the counterpart to cs4270_probe().
*/
static int cs4270_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
......@@ -591,14 +624,13 @@ static int cs4270_remove(struct platform_device *pdev)
return 0;
};
/*
* Initialize the I2C interface of the CS4270
*
* This function is called for whenever the I2C subsystem finds a device
* at a particular address.
/**
* cs4270_i2c_probe - initialize the I2C interface of the CS4270
* @i2c_client: the I2C client object
* @id: the I2C device ID (ignored)
*
* Note: snd_soc_new_pcms() must be called before this function can be called,
* because of snd_ctl_add().
* This function is called whenever the I2C subsystem finds a device that
* matches the device ID given via a prior call to i2c_add_driver().
*/
static int cs4270_i2c_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
......@@ -690,6 +722,12 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
return ret;
}
/**
* cs4270_i2c_remove - remove an I2C device
* @i2c_client: the I2C client object
*
* This function is the counterpart to cs4270_i2c_probe().
*/
static int cs4270_i2c_remove(struct i2c_client *i2c_client)
{
struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client);
......@@ -699,12 +737,21 @@ static int cs4270_i2c_remove(struct i2c_client *i2c_client)
return 0;
}
/*
* cs4270_id - I2C device IDs supported by this driver
*/
static struct i2c_device_id cs4270_id[] = {
{"cs4270", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, cs4270_id);
/*
* cs4270_i2c_driver - I2C device identification
*
* This structure tells the I2C subsystem how to identify and support a
* given I2C device type.
*/
static struct i2c_driver cs4270_i2c_driver = {
.driver = {
.name = "cs4270",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment