Merge tag 'drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: More SoC driver updates" from Olof Johansson:
 "This branch contains a handful of driver updates, mostly to the
  LPC32xx platform but also for Samsung EXYNOS and Davinci.

  It had a few context conflicts against patches already merged through
  fixes-non-critical.  We should have resolved this early during the
  development cycle by pulling them in as a dependency, instead I did it
  after the fact this time."

* tag 'drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  gpio/samsung: use ioremap() for EXYNOS4 GPIOlib
  gpio/samsung: add support GPIOlib for EXYNOS5250
  ARM: EXYNOS: add support GPIO for EXYNOS5250
  ARM: LPC32xx: Ethernet support
  ARM: LPC32xx: USB Support
  ARM: davinci: dm644x evm: add support for VPBE display
  ARM: davinci: dm644x: add support for v4l2 video display
  ARM: EXYNOS: Hook up JPEG PD to generic PD infrastructure
  ARM: EXYNOS: Hook up G2D PD to generic PD infrastructure
  arm: lpc32xx: phy3250: add rtc & touch device
  ARM: LPC32xx: clock.c: Clock registration fixes
  ARM: LPC32xx: clock.c: jiffies wrapping
  ARM: LPC32xx: clock.c: Missing header file
  ARM: LPC32XX: Remove broken non-static declaration
  ARM: LPC32xx: clock.c: Fix mutex lock issues
  ARM: LPC32xx: clock.c: warning fix
  ARM: LPC32xx: Added lpc32xx_defconfig

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -613,6 +613,113 @@ static void __init evm_init_i2c(void)
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
+#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/* venc standard timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
+	{
+		.name		= "ntsc",
+		.timings_type	= VPBE_ENC_STD,
+		.timings	= {V4L2_STD_525_60},
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {11, 10},
+		.fps		= {30000, 1001},
+		.left_margin	= 0x79,
+		.upper_margin	= 0x10,
+	},
+	{
+		.name		= "pal",
+		.timings_type	= VPBE_ENC_STD,
+		.timings	= {V4L2_STD_625_50},
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {54, 59},
+		.fps		= {25, 1},
+		.left_margin	= 0x7e,
+		.upper_margin	= 0x16,
+	},
+};
+
+/* venc dv preset timings */
+static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
+	{
+		.name		= "480p59_94",
+		.timings_type	= VPBE_ENC_DV_PRESET,
+		.timings	= {V4L2_DV_480P59_94},
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {1, 1},
+		.fps		= {5994, 100},
+		.left_margin	= 0x80,
+		.upper_margin	= 0x20,
+	},
+	{
+		.name		= "576p50",
+		.timings_type	= VPBE_ENC_DV_PRESET,
+		.timings	= {V4L2_DV_576P50},
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {1, 1},
+		.fps		= {50, 1},
+		.left_margin	= 0x7e,
+		.upper_margin	= 0x30,
+	},
+};
+
+/*
+ * The outputs available from VPBE + encoders. Keep the order same
+ * as that of encoders. First those from venc followed by that from
+ * encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more
+ * than one output. Userspace applications use index of the array to
+ * set an output.
+ */
+static struct vpbe_output dm644xevm_vpbe_outputs[] = {
+	{
+		.output		= {
+			.index		= 0,
+			.name		= "Composite",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.std		= VENC_STD_ALL,
+			.capabilities	= V4L2_OUT_CAP_STD,
+		},
+		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "ntsc",
+		.num_modes	= ARRAY_SIZE(dm644xevm_enc_std_timing),
+		.modes		= dm644xevm_enc_std_timing,
+	},
+	{
+		.output		= {
+			.index		= 1,
+			.name		= "Component",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities	= V4L2_OUT_CAP_PRESETS,
+		},
+		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "480p59_94",
+		.num_modes	= ARRAY_SIZE(dm644xevm_enc_preset_timing),
+		.modes		= dm644xevm_enc_preset_timing,
+	},
+};
+
+static struct vpbe_config dm644xevm_display_cfg = {
+	.module_name	= "dm644x-vpbe-display",
+	.i2c_adapter_id	= 1,
+	.osd		= {
+		.module_name	= VPBE_OSD_SUBDEV_NAME,
+	},
+	.venc		= {
+		.module_name	= VPBE_VENC_SUBDEV_NAME,
+	},
+	.num_outputs	= ARRAY_SIZE(dm644xevm_vpbe_outputs),
+	.outputs	= dm644xevm_vpbe_outputs,
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
 	&davinci_fb_device,
 	&rtc_dev,
@@ -696,7 +803,7 @@ static __init void davinci_evm_init(void)
 	evm_init_i2c();
 
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
-	dm644x_init_video(&dm644xevm_capture_cfg);
+	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
 	davinci_serial_init(&uart_config);
 	dm644x_init_asp(&dm644x_evm_snd_data);

arch/arm/mach-davinci/davinci.h

@@ -29,9 +29,15 @@
 
 #include <media/davinci/vpfe_capture.h>
 #include <media/davinci/vpif_types.h>
+#include <media/davinci/vpss.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpbe_osd.h>
 
 #define DAVINCI_SYSTEM_MODULE_BASE	0x01c40000
 #define SYSMOD_VIDCLKCTL		0x38
+#define SYSMOD_VPSS_CLKCTL		0x44
 #define SYSMOD_VDD3P3VPWDN		0x48
 #define SYSMOD_VSCLKDIS			0x6c
 #define SYSMOD_PUPDCTL1			0x7c
@@ -83,7 +89,7 @@ void dm365_set_vpfe_config(struct vpfe_config *cfg);
 /* DM644x function declarations */
 void __init dm644x_init(void);
 void __init dm644x_init_asp(struct snd_platform_data *pdata);
-int __init dm644x_init_video(struct vpfe_config *);
+int __init dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
 
 /* DM646x function declarations */
 void __init dm646x_init(void);

arch/arm/mach-davinci/dm644x.c

@@ -627,7 +627,7 @@ static struct resource dm644x_vpfe_resources[] = {
 	},
 };
 
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static u64 dm644x_video_dma_mask = DMA_BIT_MASK(32);
 static struct resource dm644x_ccdc_resource[] = {
 	/* CCDC Base address */
 	{
@@ -643,7 +643,7 @@ static struct platform_device dm644x_ccdc_dev = {
 	.num_resources  = ARRAY_SIZE(dm644x_ccdc_resource),
 	.resource       = dm644x_ccdc_resource,
 	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
+		.dma_mask               = &dm644x_video_dma_mask,
 		.coherent_dma_mask      = DMA_BIT_MASK(32),
 	},
 };
@@ -654,7 +654,134 @@ static struct platform_device dm644x_vpfe_dev = {
 	.num_resources	= ARRAY_SIZE(dm644x_vpfe_resources),
 	.resource	= dm644x_vpfe_resources,
 	.dev = {
-		.dma_mask		= &vpfe_capture_dma_mask,
+		.dma_mask		= &dm644x_video_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+#define DM644X_OSD_BASE		0x01c72600
+
+static struct resource dm644x_osd_resources[] = {
+	{
+		.start	= DM644X_OSD_BASE,
+		.end	= DM644X_OSD_BASE + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct osd_platform_data dm644x_osd_data = {
+	.vpbe_type     = VPBE_VERSION_1,
+};
+
+static struct platform_device dm644x_osd_dev = {
+	.name		= VPBE_OSD_SUBDEV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm644x_osd_resources),
+	.resource	= dm644x_osd_resources,
+	.dev		= {
+		.dma_mask		= &dm644x_video_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dm644x_osd_data,
+	},
+};
+
+#define DM644X_VENC_BASE		0x01c72400
+
+static struct resource dm644x_venc_resources[] = {
+	{
+		.start	= DM644X_VENC_BASE,
+		.end	= DM644X_VENC_BASE + 0x17f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+#define DM644X_VPSS_MUXSEL_PLL2_MODE          BIT(0)
+#define DM644X_VPSS_MUXSEL_VPBECLK_MODE       BIT(1)
+#define DM644X_VPSS_VENCLKEN                  BIT(3)
+#define DM644X_VPSS_DACCLKEN                  BIT(4)
+
+static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
+				   unsigned int mode)
+{
+	int ret = 0;
+	u32 v = DM644X_VPSS_VENCLKEN;
+
+	switch (type) {
+	case VPBE_ENC_STD:
+		v |= DM644X_VPSS_DACCLKEN;
+		writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
+		break;
+	case VPBE_ENC_DV_PRESET:
+		switch (mode) {
+		case V4L2_DV_480P59_94:
+		case V4L2_DV_576P50:
+			v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
+			     DM644X_VPSS_DACCLKEN;
+			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
+			break;
+		case V4L2_DV_720P60:
+		case V4L2_DV_1080I60:
+		case V4L2_DV_1080P30:
+			/*
+			 * For HD, use external clock source since
+			 * HD requires higher clock rate
+			 */
+			v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE;
+			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		break;
+	default:
+		ret  = -EINVAL;
+	}
+
+	return ret;
+}
+
+static struct resource dm644x_v4l2_disp_resources[] = {
+	{
+		.start	= IRQ_VENCINT,
+		.end	= IRQ_VENCINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm644x_vpbe_display = {
+	.name		= "vpbe-v4l2",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm644x_v4l2_disp_resources),
+	.resource	= dm644x_v4l2_disp_resources,
+	.dev		= {
+		.dma_mask		= &dm644x_video_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct venc_platform_data dm644x_venc_pdata = {
+	.venc_type	= VPBE_VERSION_1,
+	.setup_clock	= dm644x_venc_setup_clock,
+};
+
+static struct platform_device dm644x_venc_dev = {
+	.name		= VPBE_VENC_SUBDEV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm644x_venc_resources),
+	.resource	= dm644x_venc_resources,
+	.dev		= {
+		.dma_mask		= &dm644x_video_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dm644x_venc_pdata,
+	},
+};
+
+static struct platform_device dm644x_vpbe_dev = {
+	.name		= "vpbe_controller",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &dm644x_video_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 };
@@ -786,17 +913,30 @@ void __init dm644x_init(void)
 	davinci_map_sysmod();
 }
 
-int __init dm644x_init_video(struct vpfe_config *vpfe_cfg)
+int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
+				struct vpbe_config *vpbe_cfg)
 {
-	dm644x_vpfe_dev.dev.platform_data = vpfe_cfg;
-
-	/* Add ccdc clock aliases */
-	clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL);
-	clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL);
-
+	if (vpfe_cfg || vpbe_cfg)
 		platform_device_register(&dm644x_vpss_device);
+
+	if (vpfe_cfg) {
+		dm644x_vpfe_dev.dev.platform_data = vpfe_cfg;
 		platform_device_register(&dm644x_ccdc_dev);
 		platform_device_register(&dm644x_vpfe_dev);
+		/* Add ccdc clock aliases */
+		clk_add_alias("master", dm644x_ccdc_dev.name,
+			      "vpss_master", NULL);
+		clk_add_alias("slave", dm644x_ccdc_dev.name,
+			      "vpss_slave", NULL);
+	}
+
+	if (vpbe_cfg) {
+		dm644x_vpbe_dev.dev.platform_data = vpbe_cfg;
+		platform_device_register(&dm644x_osd_dev);
+		platform_device_register(&dm644x_venc_dev);
+		platform_device_register(&dm644x_vpbe_dev);
+		platform_device_register(&dm644x_vpbe_display);
+	}
 
 	return 0;
 }

arch/arm/mach-exynos/common.c

@@ -159,21 +159,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_L2CC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO1,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO2,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO2),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO3,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO3),
-		.length		= SZ_256,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_DMC0,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),

arch/arm/mach-exynos/include/mach/gpio.h

-/* linux/arch/arm/mach-exynos4/include/mach/gpio.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * EXYNOS4 - GPIO lib support
+ * EXYNOS - GPIO lib support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,9 +12,13 @@
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H __FILE__
 
-/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
+/* Macro for EXYNOS GPIO numbering */
+
+#define EXYNOS_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+/* EXYNOS4 GPIO bank sizes */
 
-/* GPIO bank sizes */
 #define EXYNOS4_GPIO_A0_NR	(8)
 #define EXYNOS4_GPIO_A1_NR	(6)
 #define EXYNOS4_GPIO_B_NR	(8)
@@ -54,52 +57,50 @@
 #define EXYNOS4_GPIO_Y6_NR	(8)
 #define EXYNOS4_GPIO_Z_NR	(7)
 
-/* GPIO bank numbers */
-
-#define EXYNOS4_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+/* EXYNOS4 GPIO bank numbers */
 
-enum s5p_gpio_number {
+enum exynos4_gpio_number {
 	EXYNOS4_GPIO_A0_START	= 0,
-	EXYNOS4_GPIO_A1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0),
-	EXYNOS4_GPIO_B_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1),
-	EXYNOS4_GPIO_C0_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B),
-	EXYNOS4_GPIO_C1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0),
-	EXYNOS4_GPIO_D0_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1),
-	EXYNOS4_GPIO_D1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0),
-	EXYNOS4_GPIO_E0_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1),
-	EXYNOS4_GPIO_E1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0),
-	EXYNOS4_GPIO_E2_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1),
-	EXYNOS4_GPIO_E3_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2),
-	EXYNOS4_GPIO_E4_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3),
-	EXYNOS4_GPIO_F0_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4),
-	EXYNOS4_GPIO_F1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0),
-	EXYNOS4_GPIO_F2_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1),
-	EXYNOS4_GPIO_F3_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2),
-	EXYNOS4_GPIO_J0_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3),
-	EXYNOS4_GPIO_J1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0),
-	EXYNOS4_GPIO_K0_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1),
-	EXYNOS4_GPIO_K1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0),
-	EXYNOS4_GPIO_K2_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1),
-	EXYNOS4_GPIO_K3_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2),
-	EXYNOS4_GPIO_L0_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3),
-	EXYNOS4_GPIO_L1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0),
-	EXYNOS4_GPIO_L2_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1),
-	EXYNOS4_GPIO_X0_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2),
-	EXYNOS4_GPIO_X1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0),
-	EXYNOS4_GPIO_X2_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1),
-	EXYNOS4_GPIO_X3_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2),
-	EXYNOS4_GPIO_Y0_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3),
-	EXYNOS4_GPIO_Y1_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0),
-	EXYNOS4_GPIO_Y2_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1),
-	EXYNOS4_GPIO_Y3_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2),
-	EXYNOS4_GPIO_Y4_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3),
-	EXYNOS4_GPIO_Y5_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4),
-	EXYNOS4_GPIO_Y6_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5),
-	EXYNOS4_GPIO_Z_START	= EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6),
+	EXYNOS4_GPIO_A1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A0),
+	EXYNOS4_GPIO_B_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A1),
+	EXYNOS4_GPIO_C0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_B),
+	EXYNOS4_GPIO_C1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0),
+	EXYNOS4_GPIO_D0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1),
+	EXYNOS4_GPIO_D1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0),
+	EXYNOS4_GPIO_E0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1),
+	EXYNOS4_GPIO_E1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0),
+	EXYNOS4_GPIO_E2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1),
+	EXYNOS4_GPIO_E3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2),
+	EXYNOS4_GPIO_E4_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3),
+	EXYNOS4_GPIO_F0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4),
+	EXYNOS4_GPIO_F1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0),
+	EXYNOS4_GPIO_F2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1),
+	EXYNOS4_GPIO_F3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2),
+	EXYNOS4_GPIO_J0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F3),
+	EXYNOS4_GPIO_J1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J0),
+	EXYNOS4_GPIO_K0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J1),
+	EXYNOS4_GPIO_K1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K0),
+	EXYNOS4_GPIO_K2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K1),
+	EXYNOS4_GPIO_K3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K2),
+	EXYNOS4_GPIO_L0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K3),
+	EXYNOS4_GPIO_L1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L0),
+	EXYNOS4_GPIO_L2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L1),
+	EXYNOS4_GPIO_X0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L2),
+	EXYNOS4_GPIO_X1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X0),
+	EXYNOS4_GPIO_X2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X1),
+	EXYNOS4_GPIO_X3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X2),
+	EXYNOS4_GPIO_Y0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X3),
+	EXYNOS4_GPIO_Y1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y0),
+	EXYNOS4_GPIO_Y2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y1),
+	EXYNOS4_GPIO_Y3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y2),
+	EXYNOS4_GPIO_Y4_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y3),
+	EXYNOS4_GPIO_Y5_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y4),
+	EXYNOS4_GPIO_Y6_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y5),
+	EXYNOS4_GPIO_Z_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6),
 };
 
 /* EXYNOS4 GPIO number definitions */
+
 #define EXYNOS4_GPA0(_nr)	(EXYNOS4_GPIO_A0_START + (_nr))
 #define EXYNOS4_GPA1(_nr)	(EXYNOS4_GPIO_A1_START + (_nr))
 #define EXYNOS4_GPB(_nr)	(EXYNOS4_GPIO_B_START + (_nr))
@@ -139,11 +140,147 @@ enum s5p_gpio_number {
 #define EXYNOS4_GPZ(_nr)	(EXYNOS4_GPIO_Z_START + (_nr))
 
 /* the end of the EXYNOS4 specific gpios */
+
 #define EXYNOS4_GPIO_END	(EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1)
-#define S3C_GPIO_END		EXYNOS4_GPIO_END
 
-/* define the number of gpios we need to the one after the GPZ() range */
-#define ARCH_NR_GPIOS		(EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) +	\
-				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+/* EXYNOS5 GPIO bank sizes */
+
+#define EXYNOS5_GPIO_A0_NR	(8)
+#define EXYNOS5_GPIO_A1_NR	(6)
+#define EXYNOS5_GPIO_A2_NR	(8)
+#define EXYNOS5_GPIO_B0_NR	(5)
+#define EXYNOS5_GPIO_B1_NR	(5)
+#define EXYNOS5_GPIO_B2_NR	(4)
+#define EXYNOS5_GPIO_B3_NR	(4)
+#define EXYNOS5_GPIO_C0_NR	(7)
+#define EXYNOS5_GPIO_C1_NR	(7)
+#define EXYNOS5_GPIO_C2_NR	(7)
+#define EXYNOS5_GPIO_C3_NR	(7)
+#define EXYNOS5_GPIO_D0_NR	(8)
+#define EXYNOS5_GPIO_D1_NR	(8)
+#define EXYNOS5_GPIO_Y0_NR	(6)
+#define EXYNOS5_GPIO_Y1_NR	(4)
+#define EXYNOS5_GPIO_Y2_NR	(6)
+#define EXYNOS5_GPIO_Y3_NR	(8)
+#define EXYNOS5_GPIO_Y4_NR	(8)
+#define EXYNOS5_GPIO_Y5_NR	(8)
+#define EXYNOS5_GPIO_Y6_NR	(8)
+#define EXYNOS5_GPIO_X0_NR	(8)
+#define EXYNOS5_GPIO_X1_NR	(8)
+#define EXYNOS5_GPIO_X2_NR	(8)
+#define EXYNOS5_GPIO_X3_NR	(8)
+#define EXYNOS5_GPIO_E0_NR	(8)
+#define EXYNOS5_GPIO_E1_NR	(2)
+#define EXYNOS5_GPIO_F0_NR	(4)
+#define EXYNOS5_GPIO_F1_NR	(4)
+#define EXYNOS5_GPIO_G0_NR	(8)
+#define EXYNOS5_GPIO_G1_NR	(8)
+#define EXYNOS5_GPIO_G2_NR	(2)
+#define EXYNOS5_GPIO_H0_NR	(4)
+#define EXYNOS5_GPIO_H1_NR	(8)
+#define EXYNOS5_GPIO_V0_NR	(8)
+#define EXYNOS5_GPIO_V1_NR	(8)
+#define EXYNOS5_GPIO_V2_NR	(8)
+#define EXYNOS5_GPIO_V3_NR	(8)
+#define EXYNOS5_GPIO_V4_NR	(2)
+#define EXYNOS5_GPIO_Z_NR	(7)
+
+/* EXYNOS5 GPIO bank numbers */
+
+enum exynos5_gpio_number {
+	EXYNOS5_GPIO_A0_START		= 0,
+	EXYNOS5_GPIO_A1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A0),
+	EXYNOS5_GPIO_A2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A1),
+	EXYNOS5_GPIO_B0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A2),
+	EXYNOS5_GPIO_B1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B0),
+	EXYNOS5_GPIO_B2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B1),
+	EXYNOS5_GPIO_B3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B2),
+	EXYNOS5_GPIO_C0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B3),
+	EXYNOS5_GPIO_C1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
+	EXYNOS5_GPIO_C2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
+	EXYNOS5_GPIO_C3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
+	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
+	EXYNOS5_GPIO_D1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
+	EXYNOS5_GPIO_Y0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
+	EXYNOS5_GPIO_Y1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
+	EXYNOS5_GPIO_Y2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y1),
+	EXYNOS5_GPIO_Y3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y2),
+	EXYNOS5_GPIO_Y4_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y3),
+	EXYNOS5_GPIO_Y5_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y4),
+	EXYNOS5_GPIO_Y6_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y5),
+	EXYNOS5_GPIO_X0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y6),
+	EXYNOS5_GPIO_X1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X0),
+	EXYNOS5_GPIO_X2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X1),
+	EXYNOS5_GPIO_X3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X2),
+	EXYNOS5_GPIO_E0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X3),
+	EXYNOS5_GPIO_E1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E0),
+	EXYNOS5_GPIO_F0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E1),
+	EXYNOS5_GPIO_F1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F0),
+	EXYNOS5_GPIO_G0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F1),
+	EXYNOS5_GPIO_G1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G0),
+	EXYNOS5_GPIO_G2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G1),
+	EXYNOS5_GPIO_H0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G2),
+	EXYNOS5_GPIO_H1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H0),
+	EXYNOS5_GPIO_V0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H1),
+	EXYNOS5_GPIO_V1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V0),
+	EXYNOS5_GPIO_V2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V1),
+	EXYNOS5_GPIO_V3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V2),
+	EXYNOS5_GPIO_V4_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V3),
+	EXYNOS5_GPIO_Z_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V4),
+};
+
+/* EXYNOS5 GPIO number definitions */
+
+#define EXYNOS5_GPA0(_nr)	(EXYNOS5_GPIO_A0_START + (_nr))
+#define EXYNOS5_GPA1(_nr)	(EXYNOS5_GPIO_A1_START + (_nr))
+#define EXYNOS5_GPA2(_nr)	(EXYNOS5_GPIO_A2_START + (_nr))
+#define EXYNOS5_GPB0(_nr)	(EXYNOS5_GPIO_B0_START + (_nr))
+#define EXYNOS5_GPB1(_nr)	(EXYNOS5_GPIO_B1_START + (_nr))
+#define EXYNOS5_GPB2(_nr)	(EXYNOS5_GPIO_B2_START + (_nr))
+#define EXYNOS5_GPB3(_nr)	(EXYNOS5_GPIO_B3_START + (_nr))
+#define EXYNOS5_GPC0(_nr)	(EXYNOS5_GPIO_C0_START + (_nr))
+#define EXYNOS5_GPC1(_nr)	(EXYNOS5_GPIO_C1_START + (_nr))
+#define EXYNOS5_GPC2(_nr)	(EXYNOS5_GPIO_C2_START + (_nr))
+#define EXYNOS5_GPC3(_nr)	(EXYNOS5_GPIO_C3_START + (_nr))
+#define EXYNOS5_GPD0(_nr)	(EXYNOS5_GPIO_D0_START + (_nr))
+#define EXYNOS5_GPD1(_nr)	(EXYNOS5_GPIO_D1_START + (_nr))
+#define EXYNOS5_GPY0(_nr)	(EXYNOS5_GPIO_Y0_START + (_nr))
+#define EXYNOS5_GPY1(_nr)	(EXYNOS5_GPIO_Y1_START + (_nr))
+#define EXYNOS5_GPY2(_nr)	(EXYNOS5_GPIO_Y2_START + (_nr))
+#define EXYNOS5_GPY3(_nr)	(EXYNOS5_GPIO_Y3_START + (_nr))
+#define EXYNOS5_GPY4(_nr)	(EXYNOS5_GPIO_Y4_START + (_nr))
+#define EXYNOS5_GPY5(_nr)	(EXYNOS5_GPIO_Y5_START + (_nr))
+#define EXYNOS5_GPY6(_nr)	(EXYNOS5_GPIO_Y6_START + (_nr))
+#define EXYNOS5_GPX0(_nr)	(EXYNOS5_GPIO_X0_START + (_nr))
+#define EXYNOS5_GPX1(_nr)	(EXYNOS5_GPIO_X1_START + (_nr))
+#define EXYNOS5_GPX2(_nr)	(EXYNOS5_GPIO_X2_START + (_nr))
+#define EXYNOS5_GPX3(_nr)	(EXYNOS5_GPIO_X3_START + (_nr))
+#define EXYNOS5_GPE0(_nr)	(EXYNOS5_GPIO_E0_START + (_nr))
+#define EXYNOS5_GPE1(_nr)	(EXYNOS5_GPIO_E1_START + (_nr))
+#define EXYNOS5_GPF0(_nr)	(EXYNOS5_GPIO_F0_START + (_nr))
+#define EXYNOS5_GPF1(_nr)	(EXYNOS5_GPIO_F1_START + (_nr))
+#define EXYNOS5_GPG0(_nr)	(EXYNOS5_GPIO_G0_START + (_nr))
+#define EXYNOS5_GPG1(_nr)	(EXYNOS5_GPIO_G1_START + (_nr))
+#define EXYNOS5_GPG2(_nr)	(EXYNOS5_GPIO_G2_START + (_nr))
+#define EXYNOS5_GPH0(_nr)	(EXYNOS5_GPIO_H0_START + (_nr))
+#define EXYNOS5_GPH1(_nr)	(EXYNOS5_GPIO_H1_START + (_nr))
+#define EXYNOS5_GPV0(_nr)	(EXYNOS5_GPIO_V0_START + (_nr))
+#define EXYNOS5_GPV1(_nr)	(EXYNOS5_GPIO_V1_START + (_nr))
+#define EXYNOS5_GPV2(_nr)	(EXYNOS5_GPIO_V2_START + (_nr))
+#define EXYNOS5_GPV3(_nr)	(EXYNOS5_GPIO_V3_START + (_nr))
+#define EXYNOS5_GPV4(_nr)	(EXYNOS5_GPIO_V4_START + (_nr))
+#define EXYNOS5_GPZ(_nr)	(EXYNOS5_GPIO_Z_START + (_nr))
+
+/* the end of the EXYNOS5 specific gpios */
+
+#define EXYNOS5_GPIO_END	(EXYNOS5_GPZ(EXYNOS5_GPIO_Z_NR) + 1)
+
+/* actually, EXYNOS5_GPIO_END is bigger than EXYNOS4 */
+
+#define S3C_GPIO_END		(EXYNOS5_GPIO_END)
+
+/* define the number of gpios */
+
+#define ARCH_NR_GPIOS		(CONFIG_SAMSUNG_GPIO_EXTRA + S3C_GPIO_END)
 
 #endif /* __ASM_ARCH_GPIO_H */

arch/arm/mach-exynos/include/mach/map.h

@@ -101,6 +101,10 @@
 #define EXYNOS4_PA_GPIO1		0x11400000
 #define EXYNOS4_PA_GPIO2		0x11000000
 #define EXYNOS4_PA_GPIO3		0x03860000
+#define EXYNOS5_PA_GPIO1		0x11400000
+#define EXYNOS5_PA_GPIO2		0x13400000
+#define EXYNOS5_PA_GPIO3		0x10D10000
+#define EXYNOS5_PA_GPIO4		0x03860000
 
 #define EXYNOS4_PA_MIPI_CSIS0		0x11880000
 #define EXYNOS4_PA_MIPI_CSIS1		0x11890000

arch/arm/mach-exynos/pm_domains.c

@@ -182,6 +182,12 @@ static __init int exynos4_pm_init_power_domain(void)
 #endif
 #ifdef CONFIG_S5P_DEV_CSIS1
 	exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam);
+#endif
+#ifdef CONFIG_S5P_DEV_G2D
+	exynos_pm_add_dev_to_genpd(&s5p_device_g2d, &exynos4_pd_lcd0);
+#endif
+#ifdef CONFIG_S5P_DEV_JPEG
+	exynos_pm_add_dev_to_genpd(&s5p_device_jpeg, &exynos4_pd_cam);
 #endif
 	return 0;
 }

arch/arm/mach-lpc32xx/Kconfig

@@ -29,5 +29,30 @@ config ARCH_LPC32XX_UART6_SELECT
 
 endmenu
 
+menu "LPC32XX chip components"
+
+config ARCH_LPC32XX_IRAM_FOR_NET
+	bool "Use IRAM for network buffers"
+	default y
+	help
+	  Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as
+	  network buffer.  If the total combined required buffer sizes is
+	  larger than the size of IRAM, then SDRAM will be used instead.
+
+	  This can be enabled safely if the IRAM is not intended for other
+	  uses.
+
+config ARCH_LPC32XX_MII_SUPPORT
+	bool "Check to enable MII support or leave disabled for RMII support"
+	help
+	  Say Y here to enable MII support, or N for RMII support. Regardless of
+	  which support is selected, the ethernet interface driver needs to be
+	  selected in the device driver networking section.
+
+	  The PHY3250 reference board uses RMII, so users of this board should
+	  say N.
+
+endmenu
+
 endif
 

arch/arm/mach-lpc32xx/clock.c

@@ -87,6 +87,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/device.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/amba/bus.h>
@@ -100,6 +101,8 @@
 
 static DEFINE_SPINLOCK(global_clkregs_lock);
 
+static int usb_pll_enable, usb_pll_valid;
+
 static struct clk clk_armpll;
 static struct clk clk_usbpll;
 
@@ -384,30 +387,62 @@ static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
 static int local_usbpll_enable(struct clk *clk, int enable)
 {
 	u32 reg;
-	int ret = -ENODEV;
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+	int ret = 0;
+	unsigned long timeout = jiffies + msecs_to_jiffies(20);
 
 	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
 
-	if (enable == 0) {
-		reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
-			LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-	} else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+	__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
+		LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
+		LPC32XX_CLKPWR_USB_CTRL);
+	__raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
+		LPC32XX_CLKPWR_USB_CTRL);
+
+	if (enable && usb_pll_valid && usb_pll_enable) {
+		ret = -ENODEV;
+		/*
+		 * If the PLL rate has been previously set, then the rate
+		 * in the PLL register is valid and can be enabled here.
+		 * Otherwise, it needs to be enabled as part of setrate.
+		 */
+
+		/*
+		 * Gate clock into PLL
+		 */
 		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
 		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
 
-		/* Wait for PLL lock */
+		/*
+		 * Enable PLL
+		 */
+		reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+		/*
+		 * Wait for PLL to lock
+		 */
 		while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
 			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
 			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
 				ret = 0;
+			else
+				udelay(10);
 		}
 
+		/*
+		 * Gate clock from PLL if PLL is locked
+		 */
 		if (ret == 0) {
-			reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
-			__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+			__raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
+				LPC32XX_CLKPWR_USB_CTRL);
+		} else {
+			__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+				LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
+				LPC32XX_CLKPWR_USB_CTRL);
 		}
+	} else if ((enable == 0) && usb_pll_valid  && usb_pll_enable) {
+		usb_pll_valid = 0;
+		usb_pll_enable = 0;
 	}
 
 	return ret;
@@ -425,7 +460,7 @@ static unsigned long local_usbpll_round_rate(struct clk *clk,
 	 */
 	rate = rate * 1000;
 
-	clkin = clk->parent->rate;
+	clkin = clk->get_rate(clk);
 	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
 		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
 	clkin = clkin / usbdiv;
@@ -439,7 +474,8 @@ static unsigned long local_usbpll_round_rate(struct clk *clk,
 
 static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 clkin, reg, usbdiv;
+	int ret = -ENODEV;
+	u32 clkin, usbdiv;
 	struct clk_pll_setup pllsetup;
 
 	/*
@@ -448,7 +484,7 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
 	 */
 	rate = rate * 1000;
 
-	clkin = clk->get_rate(clk);
+	clkin = clk->get_rate(clk->parent);
 	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
 		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
 	clkin = clkin / usbdiv;
@@ -457,22 +493,25 @@ static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
 	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
 		return -EINVAL;
 
+	/*
+	 * Disable PLL clocks during PLL change
+	 */
 	local_usbpll_enable(clk, 0);
+	pllsetup.analog_on = 0;
+	local_clk_usbpll_setup(&pllsetup);
 
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
-	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+	/*
+	 * Start USB PLL and check PLL status
+	 */
 
-	pllsetup.analog_on = 1;
-	local_clk_usbpll_setup(&pllsetup);
+	usb_pll_valid = 1;
+	usb_pll_enable = 1;
 
+	ret = local_usbpll_enable(clk, 1);
+	if (ret >= 0)
 		clk->rate = clk_check_pll_setup(clkin, &pllsetup);
 
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
-	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-	return 0;
+	return ret;
 }
 
 static struct clk clk_usbpll = {

arch/arm/mach-lpc32xx/common.c

@@ -159,6 +159,53 @@ struct platform_device lpc32xx_adc_device = {
 	.resource = adc_resources,
 };
 
+/*
+ * USB support
+ */
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32) 0;
+static struct resource ohci_resources[] = {
+	{
+		.start = IO_ADDRESS(LPC32XX_USB_BASE),
+		.end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_LPC32XX_USB_HOST,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+struct platform_device lpc32xx_ohci_device = {
+	.name = "usb-ohci",
+	.id = -1,
+	.dev = {
+		.dma_mask = &ohci_dmamask,
+		.coherent_dma_mask = 0xFFFFFFFF,
+	},
+	.num_resources = ARRAY_SIZE(ohci_resources),
+	.resource = ohci_resources,
+};
+
+/*
+ * Network Support
+ */
+static struct resource net_resources[] = {
+	[0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
+	[1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
+	[2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
+};
+
+static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
+struct platform_device lpc32xx_net_device = {
+	.name = "lpc-eth",
+	.id = 0,
+	.dev = {
+		.dma_mask = &lpc32xx_mac_dma_mask,
+		.coherent_dma_mask = 0xffffffffUL,
+	},
+	.num_resources = ARRAY_SIZE(net_resources),
+	.resource = net_resources,
+};
+
 /*
  * Returns the unique ID for the device
  */

arch/arm/mach-lpc32xx/common.h

@@ -19,6 +19,7 @@
 #ifndef __LPC32XX_COMMON_H
 #define __LPC32XX_COMMON_H
 
+#include <mach/board.h>
 #include <linux/platform_device.h>
 
 /*
@@ -31,6 +32,8 @@ extern struct platform_device lpc32xx_i2c2_device;
 extern struct platform_device lpc32xx_tsc_device;
 extern struct platform_device lpc32xx_adc_device;
 extern struct platform_device lpc32xx_rtc_device;
+extern struct platform_device lpc32xx_ohci_device;
+extern struct platform_device lpc32xx_net_device;
 
 /*
  * Other arch specific structures and functions
@@ -67,7 +70,6 @@ extern u32 clk_get_pclk_div(void);
 extern void lpc32xx_get_uid(u32 devid[4]);
 
 extern u32 lpc32xx_return_iram_size(void);
-
 /*
  * Pointers used for sizing and copying suspend function data
  */

arch/arm/mach-lpc32xx/include/mach/board.h

+/*
+ * arm/arch/mach-lpc32xx/include/mach/board.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+extern u32 lpc32xx_return_iram_size(void);
+
+#endif  /* __ASM_ARCH_BOARD_H */

arch/arm/mach-lpc32xx/irq.c

@@ -150,6 +150,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
 	},
+	[IRQ_LPC32XX_ETHERNET] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_MAC_BIT,
+	},
 	[IRQ_LPC32XX_USB_OTG_ATX] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,

arch/arm/mach-lpc32xx/phy3250.c

@@ -37,6 +37,7 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
+#include <mach/board.h>
 #include <mach/gpio-lpc32xx.h>
 #include "common.h"
 
@@ -255,6 +256,8 @@ static struct platform_device *phy3250_devs[] __initdata = {
 	&lpc32xx_watchdog_device,
 	&lpc32xx_gpio_led_device,
 	&lpc32xx_adc_device,
+	&lpc32xx_ohci_device,
+	&lpc32xx_net_device,
 };
 
 static struct amba_device *amba_devs[] __initdata = {

drivers/gpio/gpio-samsung.c

@@ -169,7 +169,7 @@ int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
 	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
 }
 
-static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip,
+static int exynos_gpio_setpull(struct samsung_gpio_chip *chip,
 				unsigned int off, samsung_gpio_pull_t pull)
 {
 	if (pull == S3C_GPIO_PULL_UP)
@@ -178,7 +178,7 @@ static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip,
 	return samsung_gpio_setpull_updown(chip, off, pull);
 }
 
-static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip,
+static samsung_gpio_pull_t exynos_gpio_getpull(struct samsung_gpio_chip *chip,
 						unsigned int off)
 {
 	samsung_gpio_pull_t pull;
@@ -452,9 +452,9 @@ static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
 };
 #endif
 
-static struct samsung_gpio_cfg exynos4_gpio_cfg = {
-	.set_pull	= exynos4_gpio_setpull,
-	.get_pull	= exynos4_gpio_getpull,
+static struct samsung_gpio_cfg exynos_gpio_cfg = {
+	.set_pull	= exynos_gpio_setpull,
+	.get_pull	= exynos_gpio_getpull,
 	.set_config	= samsung_gpio_setcfg_4bit,
 	.get_config	= samsung_gpio_getcfg_4bit,
 };
@@ -502,13 +502,13 @@ static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
 		.get_config	= samsung_gpio_getcfg_2bit,
 	},
 	[8] = {
-		.set_pull	= exynos4_gpio_setpull,
-		.get_pull	= exynos4_gpio_getpull,
+		.set_pull	= exynos_gpio_setpull,
+		.get_pull	= exynos_gpio_getpull,
 	},
 	[9] = {
 		.cfg_eint	= 0x3,
-		.set_pull	= exynos4_gpio_setpull,
-		.get_pull	= exynos4_gpio_getpull,
+		.set_pull	= exynos_gpio_setpull,
+		.get_pull	= exynos_gpio_getpull,
 	}
 };
 
@@ -2113,10 +2113,10 @@ static struct samsung_gpio_chip s5pv210_gpios_4bit[] = {
 };
 
 /*
- * Followings are the gpio banks in EXYNOS4210
+ * Followings are the gpio banks in EXYNOS SoCs
  *
  * The 'config' member when left to NULL, is initialized to the default
- * structure samsung_gpio_cfgs[3] in the init function below.
+ * structure exynos_gpio_cfg in the init function below.
  *
  * The 'base' member is also initialized in the init function below.
  * Note: The initialization of 'base' member of samsung_gpio_chip structure
@@ -2331,7 +2331,6 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
 			.label	= "GPY6",
 		},
 	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC00),
 		.config	= &samsung_gpio_cfgs[9],
 		.irq_base = IRQ_EINT(0),
 		.chip	= {
@@ -2341,7 +2340,6 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
 			.to_irq	= samsung_gpiolib_to_irq,
 		},
 	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC20),
 		.config	= &samsung_gpio_cfgs[9],
 		.irq_base = IRQ_EINT(8),
 		.chip	= {
@@ -2351,7 +2349,6 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
 			.to_irq	= samsung_gpiolib_to_irq,
 		},
 	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC40),
 		.config	= &samsung_gpio_cfgs[9],
 		.irq_base = IRQ_EINT(16),
 		.chip	= {
@@ -2361,7 +2358,6 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
 			.to_irq	= samsung_gpiolib_to_irq,
 		},
 	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC60),
 		.config	= &samsung_gpio_cfgs[9],
 		.irq_base = IRQ_EINT(24),
 		.chip	= {
@@ -2386,8 +2382,280 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = {
 #endif
 };
 
-#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
-static int exynos4_gpio_xlate(struct gpio_chip *gc,
+static struct samsung_gpio_chip exynos5_gpios_1[] = {
+#ifdef CONFIG_ARCH_EXYNOS5
+	{
+		.chip	= {
+			.base	= EXYNOS5_GPA0(0),
+			.ngpio	= EXYNOS5_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPA1(0),
+			.ngpio	= EXYNOS5_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPA2(0),
+			.ngpio	= EXYNOS5_GPIO_A2_NR,
+			.label	= "GPA2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPB0(0),
+			.ngpio	= EXYNOS5_GPIO_B0_NR,
+			.label	= "GPB0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPB1(0),
+			.ngpio	= EXYNOS5_GPIO_B1_NR,
+			.label	= "GPB1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPB2(0),
+			.ngpio	= EXYNOS5_GPIO_B2_NR,
+			.label	= "GPB2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPB3(0),
+			.ngpio	= EXYNOS5_GPIO_B3_NR,
+			.label	= "GPB3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPC0(0),
+			.ngpio	= EXYNOS5_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPC1(0),
+			.ngpio	= EXYNOS5_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPC2(0),
+			.ngpio	= EXYNOS5_GPIO_C2_NR,
+			.label	= "GPC2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPC3(0),
+			.ngpio	= EXYNOS5_GPIO_C3_NR,
+			.label	= "GPC3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPD0(0),
+			.ngpio	= EXYNOS5_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPD1(0),
+			.ngpio	= EXYNOS5_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPY0(0),
+			.ngpio	= EXYNOS5_GPIO_Y0_NR,
+			.label	= "GPY0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPY1(0),
+			.ngpio	= EXYNOS5_GPIO_Y1_NR,
+			.label	= "GPY1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPY2(0),
+			.ngpio	= EXYNOS5_GPIO_Y2_NR,
+			.label	= "GPY2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPY3(0),
+			.ngpio	= EXYNOS5_GPIO_Y3_NR,
+			.label	= "GPY3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPY4(0),
+			.ngpio	= EXYNOS5_GPIO_Y4_NR,
+			.label	= "GPY4",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPY5(0),
+			.ngpio	= EXYNOS5_GPIO_Y5_NR,
+			.label	= "GPY5",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPY6(0),
+			.ngpio	= EXYNOS5_GPIO_Y6_NR,
+			.label	= "GPY6",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= EXYNOS5_GPX0(0),
+			.ngpio	= EXYNOS5_GPIO_X0_NR,
+			.label	= "GPX0",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= EXYNOS5_GPX1(0),
+			.ngpio	= EXYNOS5_GPIO_X1_NR,
+			.label	= "GPX1",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= EXYNOS5_GPX2(0),
+			.ngpio	= EXYNOS5_GPIO_X2_NR,
+			.label	= "GPX2",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= EXYNOS5_GPX3(0),
+			.ngpio	= EXYNOS5_GPIO_X3_NR,
+			.label	= "GPX3",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip exynos5_gpios_2[] = {
+#ifdef CONFIG_ARCH_EXYNOS5
+	{
+		.chip	= {
+			.base	= EXYNOS5_GPE0(0),
+			.ngpio	= EXYNOS5_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPE1(0),
+			.ngpio	= EXYNOS5_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPF0(0),
+			.ngpio	= EXYNOS5_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPF1(0),
+			.ngpio	= EXYNOS5_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPG0(0),
+			.ngpio	= EXYNOS5_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPG1(0),
+			.ngpio	= EXYNOS5_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPG2(0),
+			.ngpio	= EXYNOS5_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPH0(0),
+			.ngpio	= EXYNOS5_GPIO_H0_NR,
+			.label	= "GPH0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPH1(0),
+			.ngpio	= EXYNOS5_GPIO_H1_NR,
+			.label	= "GPH1",
+
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip exynos5_gpios_3[] = {
+#ifdef CONFIG_ARCH_EXYNOS5
+	{
+		.chip	= {
+			.base	= EXYNOS5_GPV0(0),
+			.ngpio	= EXYNOS5_GPIO_V0_NR,
+			.label	= "GPV0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPV1(0),
+			.ngpio	= EXYNOS5_GPIO_V1_NR,
+			.label	= "GPV1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPV2(0),
+			.ngpio	= EXYNOS5_GPIO_V2_NR,
+			.label	= "GPV2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPV3(0),
+			.ngpio	= EXYNOS5_GPIO_V3_NR,
+			.label	= "GPV3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS5_GPV4(0),
+			.ngpio	= EXYNOS5_GPIO_V4_NR,
+			.label	= "GPV4",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip exynos5_gpios_4[] = {
+#ifdef CONFIG_ARCH_EXYNOS5
+	{
+		.chip	= {
+			.base	= EXYNOS5_GPZ(0),
+			.ngpio	= EXYNOS5_GPIO_Z_NR,
+			.label	= "GPZ",
+		},
+	},
+#endif
+};
+
+
+#if defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF)
+static int exynos_gpio_xlate(struct gpio_chip *gc,
 			const struct of_phandle_args *gpiospec, u32 *flags)
 {
 	unsigned int pin;
@@ -2413,12 +2681,12 @@ static int exynos4_gpio_xlate(struct gpio_chip *gc,
 	return gpiospec->args[0];
 }
 
-static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {
+static const struct of_device_id exynos_gpio_dt_match[] __initdata = {
 	{ .compatible = "samsung,exynos4-gpio", },
 	{}
 };
 
-static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+static __init void exynos_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
 						u64 base, u64 offset)
 {
 	struct gpio_chip *gc =  &chip->chip;
@@ -2429,28 +2697,29 @@ static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
 
 	address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
 	gc->of_node = of_find_matching_node_by_address(NULL,
-			exynos4_gpio_dt_match, address);
+			exynos_gpio_dt_match, address);
 	if (!gc->of_node) {
 		pr_info("gpio: device tree node not found for gpio controller"
 			" with base address %08llx\n", address);
 		return;
 	}
 	gc->of_gpio_n_cells = 4;
-	gc->of_xlate = exynos4_gpio_xlate;
+	gc->of_xlate = exynos_gpio_xlate;
 }
-#elif defined(CONFIG_ARCH_EXYNOS4)
-static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+#elif defined(CONFIG_ARCH_EXYNOS)
+static __init void exynos_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
 						u64 base, u64 offset)
 {
 	return;
 }
-#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */
+#endif /* defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF) */
 
 /* TODO: cleanup soc_is_* */
 static __init int samsung_gpiolib_init(void)
 {
 	struct samsung_gpio_chip *chip;
 	int i, nr_chips;
+	void __iomem *gpio_base1, *gpio_base2, *gpio_base3, *gpio_base4;
 	int group = 0;
 
 	samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
@@ -2516,66 +2785,200 @@ static __init int samsung_gpiolib_init(void)
 		s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
 #endif
 	} else if (soc_is_exynos4210()) {
-		group = 0;
+#ifdef CONFIG_CPU_EXYNOS4210
+		void __iomem *gpx_base;
 
 		/* gpio part1 */
+		gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
+		if (gpio_base1 == NULL) {
+			pr_err("unable to ioremap for gpio_base1\n");
+			goto err_ioremap1;
+		}
+
 		chip = exynos4_gpios_1;
 		nr_chips = ARRAY_SIZE(exynos4_gpios_1);
 
 		for (i = 0; i < nr_chips; i++, chip++) {
 			if (!chip->config) {
-				chip->config = &exynos4_gpio_cfg;
+				chip->config = &exynos_gpio_cfg;
 				chip->group = group++;
 			}
-#ifdef CONFIG_CPU_EXYNOS4210
-			exynos4_gpiolib_attach_ofnode(chip,
+			exynos_gpiolib_attach_ofnode(chip,
 					EXYNOS4_PA_GPIO1, i * 0x20);
-#endif
 		}
-		samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_1,
+					       nr_chips, gpio_base1);
 
 		/* gpio part2 */
+		gpio_base2 = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
+		if (gpio_base2 == NULL) {
+			pr_err("unable to ioremap for gpio_base2\n");
+			goto err_ioremap2;
+		}
+
+		/* need to set base address for gpx */
+		chip = &exynos4_gpios_2[16];
+		gpx_base = gpio_base2 + 0xC00;
+		for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
+			chip->base = gpx_base;
+
 		chip = exynos4_gpios_2;
 		nr_chips = ARRAY_SIZE(exynos4_gpios_2);
 
 		for (i = 0; i < nr_chips; i++, chip++) {
 			if (!chip->config) {
-				chip->config = &exynos4_gpio_cfg;
+				chip->config = &exynos_gpio_cfg;
 				chip->group = group++;
 			}
-#ifdef CONFIG_CPU_EXYNOS4210
-			exynos4_gpiolib_attach_ofnode(chip,
+			exynos_gpiolib_attach_ofnode(chip,
 					EXYNOS4_PA_GPIO2, i * 0x20);
-#endif
 		}
-		samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_2,
+					       nr_chips, gpio_base2);
 
 		/* gpio part3 */
+		gpio_base3 = ioremap(EXYNOS4_PA_GPIO3, SZ_256);
+		if (gpio_base3 == NULL) {
+			pr_err("unable to ioremap for gpio_base3\n");
+			goto err_ioremap3;
+		}
+
 		chip = exynos4_gpios_3;
 		nr_chips = ARRAY_SIZE(exynos4_gpios_3);
 
 		for (i = 0; i < nr_chips; i++, chip++) {
 			if (!chip->config) {
-				chip->config = &exynos4_gpio_cfg;
+				chip->config = &exynos_gpio_cfg;
 				chip->group = group++;
 			}
-#ifdef CONFIG_CPU_EXYNOS4210
-			exynos4_gpiolib_attach_ofnode(chip,
+			exynos_gpiolib_attach_ofnode(chip,
 					EXYNOS4_PA_GPIO3, i * 0x20);
-#endif
 		}
-		samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_3,
+					       nr_chips, gpio_base3);
 
 #if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
 		s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
 		s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
 #endif
+
+#endif	/* CONFIG_CPU_EXYNOS4210 */
+	} else if (soc_is_exynos5250()) {
+#ifdef CONFIG_SOC_EXYNOS5250
+		void __iomem *gpx_base;
+
+		/* gpio part1 */
+		gpio_base1 = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
+		if (gpio_base1 == NULL) {
+			pr_err("unable to ioremap for gpio_base1\n");
+			goto err_ioremap1;
+		}
+
+		/* need to set base address for gpx */
+		chip = &exynos5_gpios_1[20];
+		gpx_base = gpio_base1 + 0xC00;
+		for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
+			chip->base = gpx_base;
+
+		chip = exynos5_gpios_1;
+		nr_chips = ARRAY_SIZE(exynos5_gpios_1);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos_gpio_cfg;
+				chip->group = group++;
+			}
+			exynos_gpiolib_attach_ofnode(chip,
+					EXYNOS5_PA_GPIO1, i * 0x20);
+		}
+		samsung_gpiolib_add_4bit_chips(exynos5_gpios_1,
+					       nr_chips, gpio_base1);
+
+		/* gpio part2 */
+		gpio_base2 = ioremap(EXYNOS5_PA_GPIO2, SZ_4K);
+		if (gpio_base2 == NULL) {
+			pr_err("unable to ioremap for gpio_base2\n");
+			goto err_ioremap2;
+		}
+
+		chip = exynos5_gpios_2;
+		nr_chips = ARRAY_SIZE(exynos5_gpios_2);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos_gpio_cfg;
+				chip->group = group++;
+			}
+			exynos_gpiolib_attach_ofnode(chip,
+					EXYNOS5_PA_GPIO2, i * 0x20);
+		}
+		samsung_gpiolib_add_4bit_chips(exynos5_gpios_2,
+					       nr_chips, gpio_base2);
+
+		/* gpio part3 */
+		gpio_base3 = ioremap(EXYNOS5_PA_GPIO3, SZ_4K);
+		if (gpio_base3 == NULL) {
+			pr_err("unable to ioremap for gpio_base3\n");
+			goto err_ioremap3;
+		}
+
+		/* need to set base address for gpv */
+		exynos5_gpios_3[0].base = gpio_base3;
+		exynos5_gpios_3[1].base = gpio_base3 + 0x20;
+		exynos5_gpios_3[2].base = gpio_base3 + 0x60;
+		exynos5_gpios_3[3].base = gpio_base3 + 0x80;
+		exynos5_gpios_3[4].base = gpio_base3 + 0xC0;
+
+		chip = exynos5_gpios_3;
+		nr_chips = ARRAY_SIZE(exynos5_gpios_3);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos_gpio_cfg;
+				chip->group = group++;
+			}
+			exynos_gpiolib_attach_ofnode(chip,
+					EXYNOS5_PA_GPIO3, i * 0x20);
+		}
+		samsung_gpiolib_add_4bit_chips(exynos5_gpios_3,
+					       nr_chips, gpio_base3);
+
+		/* gpio part4 */
+		gpio_base4 = ioremap(EXYNOS5_PA_GPIO4, SZ_4K);
+		if (gpio_base4 == NULL) {
+			pr_err("unable to ioremap for gpio_base4\n");
+			goto err_ioremap4;
+		}
+
+		chip = exynos5_gpios_4;
+		nr_chips = ARRAY_SIZE(exynos5_gpios_4);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos_gpio_cfg;
+				chip->group = group++;
+			}
+			exynos_gpiolib_attach_ofnode(chip,
+					EXYNOS5_PA_GPIO4, i * 0x20);
+		}
+		samsung_gpiolib_add_4bit_chips(exynos5_gpios_4,
+					       nr_chips, gpio_base4);
+#endif	/* CONFIG_SOC_EXYNOS5250 */
 	} else {
 		WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
 		return -ENODEV;
 	}
 
 	return 0;
+
+err_ioremap4:
+	iounmap(gpio_base3);
+err_ioremap3:
+	iounmap(gpio_base2);
+err_ioremap2:
+	iounmap(gpio_base1);
+err_ioremap1:
+	return -ENOMEM;
 }
 core_initcall(samsung_gpiolib_init);