Skip to content

slapos
slapos
Commit efca397e authored by Thomas Gambier's avatar Thomas Gambier 🚴🏼
Browse files
Options

Update Release Candidate

parents da898852 6a72f673
Show whitespace changes
Inline Side-by-side
Showing with 1251 additions and 21 deletions
component/fftw3/buildout.cfg 0 → 100644
View file @ efca397e
[buildout]
parts =
fftw3
[fftw3]
recipe = slapos.recipe.cmmi
url = http://www.fftw.org/fftw-3.3.8.tar.gz
md5sum = 8aac833c943d8e90d51b697b27d4384d
configure-options =
--enable-shared
--enable-float
--enable-sse
component/libconfig/buildout.cfg 0 → 100644
View file @ efca397e
[buildout]
parts =
libconfig
[libconfig]
recipe = slapos.recipe.cmmi
url = https://hyperrealm.github.io/libconfig/dist/libconfig-1.7.2.tar.gz
md5sum = 6bd98ee3a6e6b9126c82c916d7a9e690
component/lksctp-tools/buildout.cfg 0 → 100644
View file @ efca397e
[buildout]
parts =
lksctp-tools
[lksctp-tools]
recipe = slapos.recipe.cmmi
url = https://freefr.dl.sourceforge.net/project/lksctp/lksctp-tools/lksctp-tools-1.0.17.tar.gz
md5sum = 68e9b8fa4d4e331029b247b72d46d7a5
component/mbedtls/buildout.cfg 0 → 100644
View file @ efca397e
[buildout]
parts = mbedtls
[mbedtls]
recipe = slapos.recipe.cmmi
url = https://tls.mbed.org/download/mbedtls-2.16.0-gpl.tgz
md5sum = 899b8385c0b47fb3e0e52baca16c93c8
shared = true
configure-command = echo
make-targets = install DESTDIR=@@LOCATION@@
component/srslte/buildout.cfg 0 → 100644
View file @ efca397e
[buildout]
extends =
../cmake/buildout.cfg
../mbedtls/buildout.cfg
../pkgconfig/buildout.cfg
../lksctp-tools/buildout.cfg
../libconfig/buildout.cfg
../boost-lib/buildout.cfg
../fftw3/buildout.cfg
parts =
srsLTE
[srsLTE]
recipe = slapos.recipe.cmmi
url = https://github.com/srsLTE/srsLTE/archive/release_18_09.zip
md5sum = d9007ff9bd03ba67c6ed8acfd9bf2a7a
pre-configure =
mkdir -p build
configure-command = cd build && ${cmake:location}/bin/cmake ../
make-binary =
make-targets= cd build &&
make DESTDIR=@@LOCATION@@ -j1 install
configure-options =
-DCMAKE_C_FLAGS="${:CMAKE_CFLAGS}"
-DCMAKE_CXX_FLAGS="${:CMAKE_CFLAGS}"
-DCMAKE_INSTALL_RPATH=${:CMAKE_LIBRARY_PATH}
-DCMAKE_INCLUDE_PATH=${mbedtls:location}/include
-DCMAKE_LIBRARY_PATH=${mbedtls:location}/lib
CMAKE_CFLAGS = -I${bzip2:location}/include -I${fftw3:location}/include -I${mbedtls:location}/include -I${lksctp-tools:location}/include -I${libconfig:location}/include -I${boost-lib:location}/include
CMAKE_LIBRARY_PATH = ${bzip2:location}/lib:${mbedtls:location}/lib:${lksctp-tools:location}/lib:${libconfig:location}/lib:${boost-lib:location}/lib:${fftw3:location}/lib
environment =
CMAKE_INSTALL_PREFIX=${buildout:directory}/bin
CMAKE_PROGRAM_PATH=${cmake:location}/bin
CMAKE_INCLUDE_PATH=${bzip2:location}/include:${mbedtls:location}/include:${lksctp-tools:location}/include:${libconfig:location}/include:${boost-lib:location}/include:${fftw3:location}/include
CMAKE_LIBRARY_PATH=${:CMAKE_LIBRARY_PATH}
CPPFLAGS=${:CMAKE_CFLAGS}
LDFLAGS=-L${bzip2:location}/lib -L${mbedtls:location}/lib -L${lksctp-tools:location}/lib -L${libconfig:location}/lib -L${boost-lib:location}/lib -L${fftw3:location}/lib
PATH=${cmake:location}/bin:${pkgconfig:location}/bin:%(PATH)s
software/caddy-frontend/test/test.py
View file @ efca397e
...@@ -524,10 +524,10 @@ class SlaveHttpFrontendTestCase(HttpFrontendTestCase): ...@@ -524,10 +524,10 @@ class SlaveHttpFrontendTestCase(HttpFrontendTestCase):
def stopServerProcess(cls): def stopServerProcess(cls):
if getattr(cls, 'test_server_certificate_file', None) is not None: if getattr(cls, 'test_server_certificate_file', None) is not None:
os.unlink(cls.test_server_certificate_file.name) os.unlink(cls.test_server_certificate_file.name)
if getattr(cls, 'server_process', None) is None: for server in ['server_process', 'server_https_process']:
return process = getattr(cls, server, None)
cls.server_process.terminate() if process is not None:
cls.server_https_process.terminate() process.terminate()
@classmethod @classmethod
def setUpSlaves(cls): def setUpSlaves(cls):
......
software/erp5testnode/software.cfg
View file @ efca397e
...@@ -61,35 +61,36 @@ output = ${buildout:directory}/template-default.cfg ...@@ -61,35 +61,36 @@ output = ${buildout:directory}/template-default.cfg
mode = 0644 mode = 0644
[versions] [versions]
erp5.util = 0.4.56 erp5.util = 0.4.57
slapos.recipe.template = 4.3 slapos.recipe.template = 4.3
dnspython = 1.15.0 dnspython = 1.15.0
PyXML = 0.8.5 PyXML = 0.8.5
WebOb = 1.8.2 WebOb = 1.8.5
WebTest = 2.0.30 WebTest = 2.0.33
gitdb2 = 2.0.4 backports.functools-lru-cache = 1.5
smmap2 = 2.0.4 soupsieve = 1.8
waitress = 1.1.0 #gitdb2 = 2.0.4
#smmap2 = 2.0.4
waitress = 1.2.1
z3c.etestbrowser = 2.0.1 z3c.etestbrowser = 2.0.1
zope.testbrowser = 5.2.4 zope.testbrowser = 5.3.2
# Required by: # Required by:
# zope.testbrowser==5.2.4 # zope.testbrowser==5.3.2
WSGIProxy2 = 0.4.4 WSGIProxy2 = 0.4.6
# Required by: # Required by:
# WebTest==2.0.30 # WebTest==2.0.33
beautifulsoup4 = 4.6.3 beautifulsoup4 = 4.7.1
# Required by: # Required by:
# zope.testbrowser==5.2.4 # zope.testbrowser==5.3.2
zope.cachedescriptors = 4.3.1 zope.cachedescriptors = 4.3.1
# Required by: # Required by:
# zope.schema==4.5.0 # zope.schema==4.9.3
zope.event = 4.3.0 zope.event = 4.4
# Required by: # Required by:
# zope.testbrowser==5.2.4 # zope.testbrowser==5.3.2
zope.schema = 4.5.0 zope.schema = 4.9.3
\ No newline at end of file
software/srslte/buildout.hash.cfg 0 → 100644
View file @ efca397e
# THIS IS NOT A BUILDOUT FILE, despite purposedly using a compatible syntax.
# The only allowed lines here are (regexes):
# - "^#" comments, copied verbatim
# - "^[" section beginings, copied verbatim
# - lines containing an "=" sign which must fit in the following categorie.
# - "^\s*filename\s*=\s*path\s*$" where "path" is relative to this file
# Copied verbatim.
# - "^\s*hashtype\s*=.*" where "hashtype" is one of the values supported
# by the re-generation script.
# Re-generated.
# - other lines are copied verbatim
# Substitution (${...:...}), extension ([buildout] extends = ...) and
# section inheritance (< = ...) are NOT supported (but you should really
# not need these here).
[template]
filename = instance.cfg
md5sum = 79d32243ed4c09d5deef1bff89899064
[template-srslte]
filename = instance-srslte.cfg
md5sum = 6b1111d64531d847f963770ed00e404a
[config-drb]
filename = config/drb.conf
md5sum = 6c7329c6f38a37fe5031a3d660c70af7
[config-enb]
filename = config/enb.conf
md5sum = a52eb159b4282468c2c3e4c12b8a3182
[config-epc]
filename = config/epc.conf
md5sum = 56f283bd0721edbf617ca4e99156e710
[config-mbms]
filename = config/mbms.conf
md5sum = 10af1d48b9ef6451817b8744e529ed66
[config-rr]
filename = config/rr.conf
md5sum = dc2f73c6a3c46356fde971f3d64b2900
[config-sib]
filename = config/sib.conf
md5sum = 7b3925879cfc839458fe9fa598d24042
[config-ue]
filename = config/ue.conf
md5sum = 869cca5a1c87a9766d0650f4ef374dc1
[config-user_db]
filename = config/user_db.csv
md5sum = e37cd54eb08de3202cc0250437a2f181
software/srslte/config/drb.conf 0 → 100644
View file @ efca397e
// All times are in ms. Use -1 for infinity, where available
qci_config = (
{
qci=7;
pdcp_config = {
discard_timer = 100;
pdcp_sn_size = 12;
}
rlc_config = {
ul_um = {
sn_field_length = 10;
};
dl_um = {
sn_field_length = 10;
t_reordering = 45;
};
};
logical_channel_config = {
priority = 13;
prioritized_bit_rate = -1;
bucket_size_duration = 100;
log_chan_group = 2;
};
},
{
qci=9;
pdcp_config = {
discard_timer = -1;
status_report_required = true;
}
rlc_config = {
ul_am = {
t_poll_retx = 120;
poll_pdu = 64;
poll_byte = 750;
max_retx_thresh = 16;
};
dl_am = {
t_reordering = 50;
t_status_prohibit = 50;
};
};
logical_channel_config = {
priority = 11;
prioritized_bit_rate = -1;
bucket_size_duration = 100;
log_chan_group = 3;
};
}
);
software/srslte/config/enb.conf 0 → 100644
View file @ efca397e
#####################################################################
# srsENB configuration file
#####################################################################
#####################################################################
# eNB configuration
#
# enb_id: 20-bit eNB identifier.
# cell_id: 8-bit cell identifier.
# tac: 16-bit Tracking Area Code.
# mcc: Mobile Country Code
# mnc: Mobile Network Code
# mme_addr: IP address of MME for S1 connnection
# gtp_bind_addr: Local IP address to bind for GTP connection
# s1c_bind_addr: Local IP address to bind for S1AP connection
# n_prb: Number of Physical Resource Blocks (6,15,25,50,75,100)
# tm: Transmission mode 1-4 (TM1 default)
# nof_ports: Number of Tx ports (1 port default, set to 2 for TM2/3/4)
#
#####################################################################
[enb]
enb_id = 0x19B
cell_id = 0x01
phy_cell_id = 1
tac = 0x0007
mcc = 001
mnc = 01
mme_addr = 127.0.1.100
gtp_bind_addr = 127.0.1.1
s1c_bind_addr = 127.0.1.1
n_prb = 50
#tm = 4
#nof_ports = 2
#####################################################################
# eNB configuration files
#
# sib_config: SIB1, SIB2 and SIB3 configuration file
# note: when enabling mbms, use the sib.conf.mbsfn configuration file which includes SIB13
# rr_config: Radio Resources configuration file
# drb_config: DRB configuration file
#####################################################################
[enb_files]
sib_config = sib.conf
rr_config = rr.conf
drb_config = drb.conf
#####################################################################
# RF configuration
#
# dl_earfcn: EARFCN code for DL
# tx_gain: Transmit gain (dB).
# rx_gain: Optional receive gain (dB). If disabled, AGC if enabled
#
# Optional parameters:
# dl_freq: Override DL frequency corresponding to dl_earfcn
# ul_freq: Override UL frequency corresponding to dl_earfcn (must be set if dl_freq is set)
# device_name: Device driver family. Supported options: "auto" (uses first found), "UHD" or "bladeRF"
# device_args: Arguments for the device driver. Options are "auto" or any string.
# Default for UHD: "recv_frame_size=9232,send_frame_size=9232"
# Default for bladeRF: ""
# #time_adv_nsamples: Transmission time advance (in number of samples) to compensate for RF delay
# from antenna to timestamp insertion.
# Default "auto". B210 USRP: 100 samples, bladeRF: 27.
# burst_preamble_us: Preamble length to transmit before start of burst.
# Default "auto". B210 USRP: 400 us, bladeRF: 0 us.
#####################################################################
[rf]
dl_earfcn = 2550
tx_gain = 56
rx_gain = 40
device_name = soapy
device_args = rxant=LNAL,txant=BAND1
time_adv_nsamples = 70
burst_preamble_us = 0
#####################################################################
# MAC-layer packet capture configuration
#
# Packets are captured to file in the compact format decoded by
# the Wireshark mac-lte-framed dissector and with DLT 147.
# To use the dissector, edit the preferences for DLT_USER to
# add an entry with DLT=147, Payload Protocol=mac-lte-framed.
# For more information see: https://wiki.wireshark.org/MAC-LTE
#
# enable: Enable MAC layer packet captures (true/false)
# filename: File path to use for packet captures
#####################################################################
[pcap]
enable = true
filename = /tmp/enb.pcap
#####################################################################
# Log configuration
#
# Log levels can be set for individual layers. "all_level" sets log
# level for all layers unless otherwise configured.
# Format: e.g. phy_level = info
#
# In the same way, packet hex dumps can be limited for each level.
# "all_hex_limit" sets the hex limit for all layers unless otherwise
# configured.
# Format: e.g. phy_hex_limit = 32
#
# Logging layers: phy, mac, rlc, pdcp, rrc, nas, gtpu, usim, all
# Logging levels: debug, info, warning, error, none
#
# filename: File path to use for log output. Can be set to stdout
# to print logs to standard output
# file_max_size: Maximum file size (in kilobytes). When passed, multiple files are created.
# If set to negative, a single log file will be created.
#####################################################################
[log]
all_level = warning
all_hex_limit = 32
filename = /tmp/enb.log
file_max_size = -1
[gui]
enable = false
#####################################################################
# Scheduler configuration options
#
# pdsch_mcs: Optional fixed PDSCH MCS (ignores reported CQIs if specified)
# pdsch_max_mcs: Optional PDSCH MCS limit
# pusch_mcs: Optional fixed PUSCH MCS (ignores reported CQIs if specified)
# pusch_max_mcs: Optional PUSCH MCS limit
# #nof_ctrl_symbols: Number of control symbols
#
#####################################################################
[scheduler]
#pdsch_mcs = -1
#pdsch_max_mcs = -1
#pusch_mcs = -1
pusch_max_mcs = 16
nof_ctrl_symbols = 3
#####################################################################
# Expert configuration options
#
# pusch_max_its: Maximum number of turbo decoder iterations (Default 4)
# pusch_8bit_decoder: Use 8-bit for LLR representation and turbo decoder trellis computation (Experimental)
# nof_phy_threads: Selects the number of PHY threads (maximum 4, minimum 1, default 2)
# metrics_period_secs: Sets the period at which metrics are requested from the UE.
# pregenerate_signals: Pregenerate uplink signals after attach. Improves CPU performance.
# tx_amplitude: Transmit amplitude factor (set 0-1 to reduce PAPR)
# link_failure_nof_err: Number of PUSCH failures after which a radio-link failure is triggered.
# a link failure is when SNR<0 and CRC=KO
# max_prach_offset_us: Maximum allowed RACH offset (in us)
# enable_mbsfn: Enable MBMS transmission in the eNB
# m1u_multiaddr: Multicast addres the M1-U socket will register to
# m1u_if_addr: Address of the inteferface the M1-U interface will listen for multicast packets.
#
#####################################################################
[expert]
pusch_max_its = 6 # These are half iterations
#pusch_8bit_decoder = false
#nof_phy_threads = 2
#pregenerate_signals = false
#tx_amplitude = 0.6
#link_failure_nof_err = 50
rrc_inactivity_timer = 60000
#max_prach_offset_us = 30
#enable_mbsfn = false
#m1u_multiaddr = 239.255.0.1
#m1u_if_addr = 127.0.1.201
software/srslte/config/epc.conf 0 → 100644
View file @ efca397e
#####################################################################
# srsEPC configuration file
#####################################################################
#####################################################################
# MME configuration
#
# mme_code: 8-bit MME code identifies the MME within a group.
# mme_group: 16-bit MME group identifier.
# tac: 16-bit Tracking Area Code.
# mcc: Mobile Country Code
# mnc: Mobile Network Code
# apn: Set Access Point Name (APN)
# mme_bind_addr: IP bind addr to listen for eNB S1-MME connnections
# dns_addr: DNS server address for the UEs
#
#####################################################################
[mme]
mme_code = 0x1a
mme_group = 0x0001
tac = 0x0007
mcc = 001
mnc = 01
mme_bind_addr = 127.0.1.100
apn = default
dns_addr = 8.8.8.8
#####################################################################
# HSS configuration
#
# algo: Authentication algorithm (xor/milenage)
# db_file: Location of .csv file that stores UEs information.
#
#####################################################################
[hss]
auth_algo = xor
db_file = user_db.csv
#####################################################################
# SP-GW configuration
#
# gtpu_bind_addr: GTP-U bind address.
# sgi_if_addr: SGi TUN interface IP address.
# sgi_if_name: SGi TUN interface name.
#
#####################################################################
[spgw]
gtpu_bind_addr = 127.0.1.100
sgi_if_addr = 172.16.0.1
sgi_if_name = srs_spgw_sgi
####################################################################
# PCAP configuration
#
# Packets are captured to file in the compact format decoded by
# the Wireshark s1ap dissector and with DLT 150.
# To use the dissector, edit the preferences for DLT_USER to
# add an entry with DLT=150, Payload Protocol=s1ap.
#
# enable: Enable or disable the PCAP.
# filename: File name where to save the PCAP.
#
####################################################################
[pcap]
enable = false
filename = /tmp/epc.pcap
####################################################################
# Log configuration
#
# Log levels can be set for individual layers. "all_level" sets log
# level for all layers unless otherwise configured.
# Format: e.g. s1ap_level = info
#
# In the same way, packet hex dumps can be limited for each level.
# "all_hex_limit" sets the hex limit for all layers unless otherwise
# configured.
# Format: e.g. s1ap_hex_limit = 32
#
# Logging layers: s1ap, gtpc, spgw, hss, all
# Logging levels: debug, info, warning, error, none
#
# filename: File path to use for log output. Can be set to stdout
# to print logs to standard output
#####################################################################
[log]
all_level = debug
all_hex_limit = 32
filename = /tmp/epc.log
#s1ap_level = debug
#gtpc_level = debug
#spgw_level = debug
#hss_level = debug
software/srslte/config/mbms.conf 0 → 100644
View file @ efca397e
#####################################################################
# srsMBMS configuration file
#####################################################################
#####################################################################
# MBMS-GW configuration
#
# name: MBMS-GW name
# sgi_mb_if_name: SGi-mb TUN interface name
# sgi_mb_if_addr: SGi-mb interface IP address
# sgi_mb_if_mask: SGi-mb interface IP mask
# m1u_multi_addr: Multicast group for eNBs (FIXME this should be setup with M2/M3)
# m1u_multi_if: IP of local interface for multicast traffic
# m1u_multi_ttl: TTL for M1-U multicast traffic
#
#####################################################################
[mbms_gw]
name = srsmbmsgw01
sgi_mb_if_name = sgi_mb
sgi_mb_if_addr = 172.16.0.254
sgi_mb_if_mask = 255.255.255.255
m1u_multi_addr = 239.255.0.1
m1u_multi_if = 127.0.1.200
m1u_multi_ttl = 1
####################################################################
# Log configuration
#
# Log levels can be set for individual layers. "all_level" sets log
# level for all layers unless otherwise configured.
# Format: e.g. s1ap_level = info
#
# In the same way, packet hex dumps can be limited for each level.
# "all_hex_limit" sets the hex limit for all layers unless otherwise
# configured.
# Format: e.g. s1ap_hex_limit = 32
#
# Logging layers: mbms_gw, all
# Logging levels: debug, info, warning, error, none
#
# filename: File path to use for log output. Can be set to stdout
# to print logs to standard output
#####################################################################
[log]
all_level = debug
all_hex_limit = 32
filename = /tmp/mbms.log
software/srslte/config/rr.conf 0 → 100644
View file @ efca397e
mac_cnfg =
{
phr_cnfg =
{
dl_pathloss_change = "3dB"; // Valid: 1, 3, 6 or INFINITY
periodic_phr_timer = 50;
prohibit_phr_timer = 0;
};
ulsch_cnfg =
{
max_harq_tx = 4;
periodic_bsr_timer = 20; // in ms
retx_bsr_timer = 320; // in ms
};
time_alignment_timer = -1; // -1 is infinity
};
phy_cnfg =
{
phich_cnfg =
{
duration = "Normal";
resources = "1/6";
};
pusch_cnfg_ded =
{
beta_offset_ack_idx = 6;
beta_offset_ri_idx = 6;
beta_offset_cqi_idx = 6;
};
// PUCCH-SR resources are scheduled on time-frequeny domain first, then multiplexed in the same resource.
sched_request_cnfg =
{
dsr_trans_max = 64;
period = 20; // in ms
subframe = [1]; // vector of subframe indices allowed for SR transmissions
nof_prb = 2; // number of PRBs on each extreme used for SR (total prb is twice this number)
};
cqi_report_cnfg =
{
mode = "periodic";
simultaneousAckCQI = true;
period = 40; // in ms
subframe = [0];
nof_prb = 2;
};
};
software/srslte/config/sib.conf 0 → 100644
View file @ efca397e
sib1 =
{
intra_freq_reselection = "Allowed";
q_rx_lev_min = -130;
//p_max = 3;
cell_barred = "Not Barred"
si_window_length = 20;
sched_info =
(
{
si_periodicity = 16;
si_mapping_info = []; // comma-separated array of SIB-indexes (from 3 to 13).
// Leave empty or commented to just scheduler sib2
}
);
system_info_value_tag = 0;
};
sib2 =
{
rr_config_common_sib =
{
rach_cnfg =
{
num_ra_preambles = 52;
preamble_init_rx_target_pwr = -104;
pwr_ramping_step = 6; // in dB
preamble_trans_max = 10;
ra_resp_win_size = 10; // in ms
mac_con_res_timer = 64; // in ms
max_harq_msg3_tx = 4;
};
bcch_cnfg =
{
modification_period_coeff = 16; // in ms
};
pcch_cnfg =
{
default_paging_cycle = 32; // in rf
nB = "1";
};
prach_cnfg =
{
root_sequence_index = 128;
prach_cnfg_info =
{
high_speed_flag = false;
prach_config_index = 3;
prach_freq_offset = 2;
zero_correlation_zone_config = 5;
};
};
pdsch_cnfg =
{
p_b = 0;
rs_power = 0;
};
pusch_cnfg =
{
n_sb = 1;
hopping_mode = "inter-subframe";
pusch_hopping_offset = 2;
enable_64_qam = false; // 64QAM PUSCH is not currently enabled
ul_rs =
{
cyclic_shift = 0;
group_assignment_pusch = 0;
group_hopping_enabled = false;
sequence_hopping_enabled = false;
};
};
pucch_cnfg =
{
delta_pucch_shift = 2;
n_rb_cqi = 2;
n_cs_an = 0;
n1_pucch_an = 12;
};
ul_pwr_ctrl =
{
p0_nominal_pusch = -85;
alpha = 0.7;
p0_nominal_pucch = -107;
delta_flist_pucch =
{
format_1 = 0;
format_1b = 3;
format_2 = 1;
format_2a = 2;
format_2b = 2;
};
delta_preamble_msg3 = 8;
};
ul_cp_length = "Normal";
};
ue_timers_and_constants =
{
t300 = 2000; // in ms
t301 = 100; // in ms
t310 = 1000; // in ms
n310 = 1;
t311 = 1000; // in ms
n311 = 1;
};
freqInfo =
{
ul_carrier_freq_present = true;
ul_bw_present = true;
additional_spectrum_emission = 1;
};
time_alignment_timer = "INFINITY"; // use "sf500", "sf750", etc.
};
software/srslte/config/ue.conf 0 → 100644
View file @ efca397e
#####################################################################
# srsUE configuration file
#####################################################################
# RF configuration
#
# dl_earfcn: Downlink EARFCN code.
# freq_offset: Uplink and Downlink optional frequency offset (in Hz)
# tx_gain: Transmit gain (dB).
# rx_gain: Optional receive gain (dB). If disabled, AGC if enabled
#
# Optional parameters:
# dl_freq: Override DL frequency corresponding to dl_earfcn
# ul_freq: Override UL frequency corresponding to dl_earfcn
# nof_rx_ant: Number of RX antennas (Default 1, supported 1 or 2)
# device_name: Device driver family. Supported options: "auto" (uses first found), "UHD" or "bladeRF"
# device_args: Arguments for the device driver. Options are "auto" or any string.
# Default for UHD: "recv_frame_size=9232,send_frame_size=9232"
# Default for bladeRF: ""
# time_adv_nsamples: Transmission time advance (in number of samples) to compensate for RF delay
# from antenna to timestamp insertion.
# Default "auto". B210 USRP: 100 samples, bladeRF: 27.
# burst_preamble_us: Preamble length to transmit before start of burst.
# Default "auto". B210 USRP: 400 us, bladeRF: 0 us.
# continuous_tx: Transmit samples continuously to the radio or on bursts (auto/yes/no).
# Default is auto (yes for UHD, no for rest)
#####################################################################
[rf]
dl_earfcn = 3400
freq_offset = 0
tx_gain = 80
#rx_gain = 40
#nof_rx_ant = 1
#device_name = auto
#device_args = auto
#time_adv_nsamples = auto
#burst_preamble_us = auto
#continuous_tx = auto
#####################################################################
# MAC-layer packet capture configuration
#
# Packets are captured to file in the compact format decoded by
# the Wireshark mac-lte-framed dissector and with DLT 147.
# To use the dissector, edit the preferences for DLT_USER to
# add an entry with DLT=147, Payload Protocol=mac-lte-framed.
# For more information see: https://wiki.wireshark.org/MAC-LTE
#
# enable: Enable MAC layer packet captures (true/false)
# filename: File path to use for packet captures
#####################################################################
[pcap]
enable = false
filename = /tmp/ue.pcap
nas_enable = false
nas_filename = /tmp/nas.pcap
#####################################################################
# Log configuration
#
# Log levels can be set for individual layers. "all_level" sets log
# level for all layers unless otherwise configured.
# Format: e.g. phy_level = info
#
# In the same way, packet hex dumps can be limited for each level.
# "all_hex_limit" sets the hex limit for all layers unless otherwise
# configured.
# Format: e.g. phy_hex_limit = 32
#
# Logging layers: phy, mac, rlc, pdcp, rrc, nas, gw, usim, all
# Logging levels: debug, info, warning, error, none
#
# filename: File path to use for log output. Can be set to stdout
# to print logs to standard output
# file_max_size: Maximum file size (in kilobytes). When passed, multiple files are created.
# If set to negative, a single log file will be created.
#####################################################################
[log]
all_level = warning
phy_lib_level = none
all_hex_limit = 32
filename = /tmp/ue.log
file_max_size = -1
#####################################################################
# USIM configuration
#
# mode: USIM mode (soft/pcsc)
# algo: Authentication algorithm (xor/milenage)
# op: 128-bit Operator Variant Algorithm Configuration Field (hex)
# k: 128-bit subscriber key (hex)
# imsi: 15 digit International Mobile Subscriber Identity
# imei: 15 digit International Mobile Station Equipment Identity
# pin: PIN in case real SIM card is used
# reader: Specify card reader by it's name as listed by 'pcsc_scan'. If empty, try all available readers.
#####################################################################
[usim]
mode = soft
algo = xor
opc = 63BFA50EE6523365FF14C1F45F88737D
k = 00112233445566778899aabbccddeeff
imsi = 001010123456789
imei = 353490069873319
#reader =
#pin = 1234
#####################################################################
# RRC configuration
#
# ue_category: Sets UE category (range 1-5). Default: 4
# feature_group: Hex value of the featureGroupIndicators field in the
# UECapabilityInformation message. Default 0xe6041000
#####################################################################
[rrc]
#ue_category = 4
#feature_group = 0xe6041000
#####################################################################
# NAS configuration
#
# apn: Set Access Point Name (APN)
# user: Username for CHAP authentication
# pass: Password for CHAP authentication
# force_imsi_attach: Whether to always perform an IMSI attach
#####################################################################
[nas]
#apn = internetinternet
#user = srsuser
#pass = srspass
#force_imsi_attach = false
[gui]
enable = false
#####################################################################
# Expert configuration options
#
# ip_netmask: Netmask of the tun_srsue device. Default: 255.255.255.0
# ip_devname: Nanme of the tun_srsue device. Default: tun_srsue
# rssi_sensor_enabled: Enable or disable RF frontend RSSI sensor. Required for RSRP metrics but
# can cause UHD instability for long-duration testing. Default true.
# rx_gain_offset: RX Gain offset to add to rx_gain to calibrate RSRP readings
# prach_gain: PRACH gain (dB). If defined, forces a gain for the tranmsission of PRACH only.,
# Default is to use tx_gain in [rf] section.
# cqi_max: Upper bound on the maximum CQI to be reported. Default 15.
# cqi_fixed: Fixes the reported CQI to a constant value. Default disabled.
# snr_ema_coeff: Sets the SNR exponential moving average coefficient (Default 0.1)
# snr_estim_alg: Sets the noise estimation algorithm. (Default refs)
# Options: pss: use difference between received and known pss signal,
# refs: use difference between noise references and noiseless (after filtering)
# empty: use empty subcarriers in the boarder of pss/sss signal
# pdsch_max_its: Maximum number of turbo decoder iterations (Default 4)
# attach_enable_64qam: Enables PUSCH 64QAM modulation before attachment (Necessary for old
# Amarisoft LTE 100 eNodeB, disabled by default)
# nof_phy_threads: Selects the number of PHY threads (maximum 4, minimum 1, default 2)
# equalizer_mode: Selects equalizer mode. Valid modes are: "mmse", "zf" or any
# non-negative real number to indicate a regularized zf coefficient.
# Default is MMSE.
# time_correct_period: Period for sampling time offset correction. Default is 10 (ue_sync.c),
# good for long channels. For best performance at highest SNR reduce it to 1.
# sfo_correct_disable: Disables phase correction before channel estimation to compensate for
# sampling frequency offset. Default is enabled.
# sfo_ema: EMA coefficient to average sample offsets used to compute SFO
# sfo_correct_period: Period in ms to correct sample time to adjust for SFO
# sss_algorithm: Selects the SSS estimation algorithm. Can choose between
# {full, partial, diff}.
# estimator_fil_auto: The channel estimator smooths the channel estimate with an adaptative filter.
# estimator_fil_stddev: Sets the channel estimator smooth gaussian filter standard deviation.
# estimator_fil_order: Sets the channel estimator smooth gaussian filter order (even values perform better).
# The taps are [w, 1-2w, w]
#
# pregenerate_signals: Pregenerate uplink signals after attach. Improves CPU performance.
#
# average_subframe_enabled: Averages in the time domain the channel estimates within 1 subframe.
# Needs accurate CFO correction.
#
# sic_pss_enabled: Applies Successive Interference Cancellation to PSS signals when searching for neighbour cells.
# Must be disabled if cells have identical channel and timing, for instance if generated from
# the same source.
#
# metrics_csv_enable: Write UE metrics to CSV file.
#
# metrics_period_secs: Sets the period at which metrics are requested from the UE.
#
# metrics_csv_filename: File path to use for CSV metrics.
#
# cfo_integer_enabled: Enables integer CFO estimation and correction. This needs improvement
# and may lead to incorrect synchronization. Use with caution.
# cfo_correct_tol_hz: Tolerance (in Hz) for digial CFO compensation. Lower tolerance means that
# a new table will be generated more often.
#
# cfo_is_doppler: Assume detected CFO is doppler and correct the UL in the same direction. If disabled, the CFO is assumed
# to be caused by the local oscillator and the UL correction is in the opposite direction. Default assumes oscillator.
# cfo_pss_ema: CFO Exponential Moving Average coefficient for PSS estimation during TRACK.
# cfo_ref_ema: CFO Exponential Moving Average coefficient for RS estimation after PSS acquisition
# cfo_ref_mask: Bitmask for subframes on which to run RS estimation (set to 0 to disable, default sf=[1, 5])
# cfo_loop_bw: CFO feedback loop bandwidth for samples from PSS or RS
# cfo_loop_pss_tol: Tolerance (in Hz) of the PSS estimation method. Below this value, PSS estimation does not feeds back the loop
# and RS estimations are used instead (when available)
# cfo_loop_ref_min: Tolerance (in Hz) of the RS estimation method. Below this value, RS estimation does not feeds back the loop
# cfo_loop_pss_timeout: After the PSS estimation is below cfo_loop_pss_tol for cfo_loop_pss_timeout times consecutively,
# RS adjustments are allowed.
#
# pdsch_csi_enabled: Stores the Channel State Information and uses it for weightening the softbits. It is only
# used in TM1. It is True by default.
#
# pdsch_8bit_decoder: Use 8-bit for LLR representation and turbo decoder trellis computation (Experimental)
#
#####################################################################
[expert]
#ip_netmask = 255.255.255.0
#ip_devname = tun_srsue
#mbms_service = -1
#rssi_sensor_enabled = false
#rx_gain_offset = 62
#prach_gain = 30
#cqi_max = 15
#cqi_fixed = 10
#snr_ema_coeff = 0.1
#snr_estim_alg = refs
#pdsch_max_its = 8 # These are half iterations
#attach_enable_64qam = false
#nof_phy_threads = 2
#equalizer_mode = mmse
#time_correct_period = 5
#sfo_correct_disable = false
#sfo_ema = 0.1
#sfo_correct_period = 10
#sss_algorithm = full
#estimator_fil_auto = false
#estimator_fil_stddev = 1.0
#estimator_fil_order = 4
#average_subframe_enabled = true
#sic_pss_enabled = true
#pregenerate_signals = false
#metrics_csv_enable = false
#metrics_period_secs = 1
#metrics_csv_filename = /tmp/ue_metrics.csv
#pdsch_csi_enabled = true
#pdsch_8bit_decoder = false
# CFO related values
#cfo_is_doppler = false
#cfo_integer_enabled = false
#cfo_correct_tol_hz = 1.0
#cfo_pss_ema = 0.05
#cfo_ref_mask = 1023
#cfo_loop_bw_pss = 0.05
#cfo_loop_bw_ref = 0.01
#cfo_loop_pss_tol = 400
#cfo_loop_ref_min = 0
#cfo_loop_pss_conv = 20
software/srslte/config/user_db.csv 0 → 100644
View file @ efca397e
#
# .csv to store UE's information in HSS
# Kept in the following format: "Name,IMSI,Key,OP_Type,OP,AMF,SQN,QCI"
#
# Name: Human readable name to help distinguish UE's. Ignored by the HSS
# IMSI: UE's IMSI value
# Key: UE's key, where other keys are derived from. Stored in hexadecimal
# OP_Type: Operator's code type, either OP or OPc
# OP/OPc: Operator Code/Cyphered Operator Code, stored in hexadecimal
# AMF: Authentication management field, stored in hexadecimal
# SQN: UE's Sequence number for freshness of the authentication
# QCI: QoS Class Identifier for the UE's default bearer.
#
# Note: Lines starting by '#' are ignored and will be overwritten
ue3,001010000001001,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue4,001010000001002,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue5,001010000001003,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue6,001010000001004,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue7,001010000001005,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue8,001010000001006,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue9,001010000001007,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue10,001010000001008,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue11,001010000001009,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue12,001010000001010,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue13,001010000001011,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue14,001010000001012,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue15,001010000001013,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue16,001010000001014,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue17,001010000001015,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue18,001010000001016,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue19,001010000001017,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue20,001010000001018,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue21,001010000001019,00112233445566778899aabbccddeeff,op,63bfa50ee6523365ff14c1f45f88737d,8002,000000001234,7
ue2,001010123456780,00112233445566778899aabbccddeeff,opc,63bfa50ee6523365ff14c1f45f88737d,8000,000000001234,7
ue1,001010123456789,00112233445566778899aabbccddeeff,opc,63bfa50ee6523365ff14c1f45f88737d,9001,00000000137e,7
software/srslte/instance-srslte-input-schema.json 0 → 100644
View file @ efca397e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"Log": {
"type": "object",
"title": "Log Configuration",
"properties": {
"options": {
"title": "Log Level",
"description": "Log Level",
"type": "string",
"default": "debug"
}
}
},
"mme_addr": {
"title": "MME address",
"description": "address of MME for S1AP connection",
"type": "string",
"default": "127.0.1.100"
},
"rf_params": {
"type": "object",
"title": "RF Parameters",
"properties": {
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink EARFCN of the cell",
"type": "number"
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
}
}
}
}
}
software/srslte/instance-srslte.cfg 0 → 100644
View file @ efca397e
[buildout]
extends = {{ monitor_template_output }}
parts =
config-drb
config-enb
config-epc
config-mbms
config-rr
config-sib
config-ue
config-user_db
srsepc
srsenb
monitor-base
publish-connection-information
eggs-directory = {{ eggs_directory }}
develop-eggs-directory = {{ develop_eggs_directory }}
offline = true
[directory]
srsconfig = $${buildout:directory}/.srs
[config-base]
recipe = slapos.recipe.template:jinja2
mode = 0664
extensions = jinja2.ext.do
context =
section directory directory
[config-drb]
<= config-base
template = {{ config_drb_template }}
rendered = $${directory:srsconfig}/drb.conf
[config-enb]
<= config-base
template = {{ config_enb_template }}
rendered = $${directory:srsconfig}/enb.conf
[config-epc]
<= config-base
template = {{ config_epc_template }}
rendered = $${directory:srsconfig}/epc.conf
[config-mbms]
<= config-base
template = {{ config_mbms_template }}
rendered = $${directory:srsconfig}/mbms.conf
[config-rr]
<= config-base
template = {{ config_rr_template }}
rendered = $${directory:srsconfig}/rr.conf
[config-sib]
<= config-base
template = {{ config_sib_template }}
rendered = $${directory:srsconfig}/sib.conf
[config-ue]
<= config-base
template = {{ config_ue_template }}
rendered = $${directory:srsconfig}/ue.conf
[config-user_db]
<= config-base
template = {{ config_user_db_template }}
rendered = $${directory:srsconfig}/user_db.csv
[srsepc]
recipe = slapos.cookbook:wrapper
wrapper-path = $${directory:services}/$${:_buildout_section_name_}
pidfile = $${directory:run}/srsepc.pid
command-line =
/usr/bin/sudo {{ srsepc_bin }}
[srsenb]
recipe = slapos.cookbook:wrapper
wrapper-path = $${directory:services}/$${:_buildout_section_name_}
pidfile = $${directory:run}/srsenb.pid
command-line =
/usr/bin/sudo {{ srsenb_bin }}
[publish-connection-information]
recipe = slapos.cookbook:publish
monitor-setup-url = https://monitor.app.officejs.com/#page=settings_configurator&url=$${monitor-publish-parameters:monitor-url}&username=$${monitor-publish-parameters:monitor-user}&password=$${monitor-publish-parameters:monitor-password}
software/srslte/instance.cfg 0 → 100644
View file @ efca397e
[buildout]
parts =
switch_softwaretype
eggs-directory = ${buildout:eggs-directory}
develop-eggs-directory = ${buildout:develop-eggs-directory}
[switch_softwaretype]
recipe = slapos.cookbook:softwaretype
default = $${instance-base-srslte:rendered}
[instance-base-srslte]
recipe = slapos.recipe.template:jinja2
template = ${template-srslte:output}
rendered = $${buildout:directory}/template-base-srslte.cfg
extensions = jinja2.ext.do
context = key develop_eggs_directory buildout:develop-eggs-directory
key eggs_directory buildout:eggs-directory
key slapparameter_dict slap-configuration:configuration
raw buildout_bin ${buildout:bin-directory}
raw monitor_template_output ${monitor-template:output}
raw config_drb_template ${config-drb:target}
raw config_enb_template ${config-enb:target}
raw config_epc_template ${config-epc:target}
raw config_mbms_template ${config-mbms:target}
raw config_rr_template ${config-rr:target}
raw config_sib_template ${config-sib:target}
raw config_ue_template ${config-ue:target}
raw config_user_db_template ${config-user_db:target}
raw srsenb_bin ${srsLTE:location}/usr/local/bin/srsenb
raw srsepc_bin ${srsLTE:location}/usr/local/bin/srsepc
mode = 0644
[slap-configuration]
recipe = slapos.cookbook:slapconfiguration.serialised
computer = $${slap-connection:computer-id}
partition = $${slap-connection:partition-id}
url = $${slap-connection:server-url}
key = $${slap-connection:key-file}
cert = $${slap-connection:cert-file}
software/srslte/software.cfg 0 → 100644
View file @ efca397e
[buildout]
extends =
../../component/srslte/buildout.cfg
../../stack/slapos.cfg
../../stack/monitor/buildout.cfg
buildout.hash.cfg
parts =
slapos-cookbook
srsLTE
template
template-srslte
config-drb
config-enb
config-epc
config-mbms
config-rr
config-sib
config-ue
config-user_db
[template]
recipe = slapos.recipe.template
url = ${:_profile_base_location_}/${:filename}
output = ${buildout:directory}/template.cfg
[template-srslte]
recipe = slapos.recipe.template
url = ${:_profile_base_location_}/${:filename}
output = ${buildout:directory}/${:filename}
[config-drb]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/config/${:filename}
filename = drb.conf
[config-enb]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/config/${:filename}
filename = enb.conf
[config-epc]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/config/${:filename}
filename = epc.conf
[config-mbms]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/config/${:filename}
filename = mbms.conf
[config-rr]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/config/${:filename}
filename = rr.conf
[config-sib]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/config/${:filename}
filename = sib.conf
[config-ue]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/config/${:filename}
filename = ue.conf
[config-user_db]
recipe = slapos.recipe.build:download
url = ${:_profile_base_location_}/config/${:filename}
filename = user_db.csv
[versions]
slapos.recipe.template = 4.3
apache-libcloud = 2.4.0
software/srslte/software.cfg.json 0 → 100644
View file @ efca397e
{
"name": "srsLTE",
"description": "srsLTE",
"serialisation": "json-in-xml",
"software-type": {
"default": {
"title": "Default",
"software-type": "default",
"description": "Default",
"request": "instance-srslte-input-schema.json",
"response": "instance-srslte-schema.json",
"index": 1
}
}
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7