Commit be06752b authored by Łukasz Nowak's avatar Łukasz Nowak

- download patch instead of using local storage


git-svn-id: https://svn.erp5.org/repos/public/erp5/trunk@31984 20353a03-c40f-0410-a6d1-a30d3c3de9de
parent 7440ad4d
...@@ -21,16 +21,19 @@ recipe = hexagonit.recipe.cmmi ...@@ -21,16 +21,19 @@ recipe = hexagonit.recipe.cmmi
url = http://sourceforge.jp/frs/redir.php?m=jaist&f=%2Fsenna%2F33763%2Fsenna-1.1.4.tar.gz url = http://sourceforge.jp/frs/redir.php?m=jaist&f=%2Fsenna%2F33763%2Fsenna-1.1.4.tar.gz
configure-options = --without-mecab --enable-nfkc=no configure-options = --without-mecab --enable-nfkc=no
[tritonn-patch]
recipe = hexagonit.recipe.download
url = http://dl.sourceforge.jp/tritonn/44472/tritonn-1.0.12-mysql-5.0.87.diff
download-only = true
[mysql-tritonn-5.0] [mysql-tritonn-5.0]
dumb_dependency = ${tritonn-patch:url}
recipe = hexagonit.recipe.cmmi recipe = hexagonit.recipe.cmmi
url = http://downloads.mysql.com/archives/mysql-5.0/mysql-5.0.87.tar.gz url = http://downloads.mysql.com/archives/mysql-5.0/mysql-5.0.87.tar.gz
pre-configure-hook = ${buildout:directory}/mysql-tritonn-5.0/src/mysql_pre_configure.py:hook pre-configure-hook = ${buildout:directory}/mysql-tritonn-5.0/src/mysql_pre_configure.py:hook
configure-options = --with-senna --without-mecab configure-options = --with-senna --without-mecab
patch-options = -p1 patch-options = -p1
# might be better to download patch from patches = ${buildout:directory}/downloads/tritonn-1.0.12-mysql-5.0.87.diff
# http://sourceforge.jp/frs/redir.php?m=iij&f=%2Ftritonn%2F44472%2Ftritonn-1.0.12-mysql-5.0.87.diff
# but putting in url downloads to redir.php instead of proper file name
patches = ${buildout:directory}/mysql-tritonn-5.0/patches/tritonn-1.0.12-mysql-5.0.87.diff
environment = environment =
PATH =${senna:location}/bin:%(PATH)s PATH =${senna:location}/bin:%(PATH)s
......
diff -Nru mysql-5.0.67-orig/ylwrap mysql-5.0.67/ylwrap
--- mysql-5.0.67-orig/ylwrap 1970-01-01 01:00:00.000000000 +0100
+++ mysql-5.0.67/ylwrap 2009-10-11 23:58:20.000000000 +0200
@@ -0,0 +1,223 @@
+#! /bin/sh
+# ylwrap - wrapper for lex/yacc invocations.
+
+scriptversion=2007-11-22.22
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005,
+# 2007 Free Software Foundation, Inc.
+#
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case "$1" in
+ '')
+ echo "$0: No files given. Try \`$0 --help' for more information." 1>&2
+ exit 1
+ ;;
+ --basedir)
+ basedir=$2
+ shift 2
+ ;;
+ -h|--h*)
+ cat <<\EOF
+Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
+
+Wrapper for lex/yacc invocations, renaming files as desired.
+
+ INPUT is the input file
+ OUTPUT is one file PROG generates
+ DESIRED is the file we actually want instead of OUTPUT
+ PROGRAM is program to run
+ ARGS are passed to PROG
+
+Any number of OUTPUT,DESIRED pairs may be used.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v|--v*)
+ echo "ylwrap $scriptversion"
+ exit $?
+ ;;
+esac
+
+
+# The input.
+input="$1"
+shift
+case "$input" in
+ [\\/]* | ?:[\\/]*)
+ # Absolute path; do nothing.
+ ;;
+ *)
+ # Relative path. Make it absolute.
+ input="`pwd`/$input"
+ ;;
+esac
+
+pairlist=
+while test "$#" -ne 0; do
+ if test "$1" = "--"; then
+ shift
+ break
+ fi
+ pairlist="$pairlist $1"
+ shift
+done
+
+# The program to run.
+prog="$1"
+shift
+# Make any relative path in $prog absolute.
+case "$prog" in
+ [\\/]* | ?:[\\/]*) ;;
+ *[\\/]*) prog="`pwd`/$prog" ;;
+esac
+
+# FIXME: add hostname here for parallel makes that run commands on
+# other machines. But that might take us over the 14-char limit.
+dirname=ylwrap$$
+trap "cd '`pwd`'; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15
+mkdir $dirname || exit 1
+
+cd $dirname
+
+case $# in
+ 0) "$prog" "$input" ;;
+ *) "$prog" "$@" "$input" ;;
+esac
+ret=$?
+
+if test $ret -eq 0; then
+ set X $pairlist
+ shift
+ first=yes
+ # Since DOS filename conventions don't allow two dots,
+ # the DOS version of Bison writes out y_tab.c instead of y.tab.c
+ # and y_tab.h instead of y.tab.h. Test to see if this is the case.
+ y_tab_nodot="no"
+ if test -f y_tab.c || test -f y_tab.h; then
+ y_tab_nodot="yes"
+ fi
+
+ # The directory holding the input.
+ input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
+ # Quote $INPUT_DIR so we can use it in a regexp.
+ # FIXME: really we should care about more than `.' and `\'.
+ input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
+
+ while test "$#" -ne 0; do
+ from="$1"
+ # Handle y_tab.c and y_tab.h output by DOS
+ if test $y_tab_nodot = "yes"; then
+ if test $from = "y.tab.c"; then
+ from="y_tab.c"
+ else
+ if test $from = "y.tab.h"; then
+ from="y_tab.h"
+ fi
+ fi
+ fi
+ if test -f "$from"; then
+ # If $2 is an absolute path name, then just use that,
+ # otherwise prepend `../'.
+ case "$2" in
+ [\\/]* | ?:[\\/]*) target="$2";;
+ *) target="../$2";;
+ esac
+
+ # We do not want to overwrite a header file if it hasn't
+ # changed. This avoid useless recompilations. However the
+ # parser itself (the first file) should always be updated,
+ # because it is the destination of the .y.c rule in the
+ # Makefile. Divert the output of all other files to a temporary
+ # file so we can compare them to existing versions.
+ if test $first = no; then
+ realtarget="$target"
+ target="tmp-`echo $target | sed s/.*[\\/]//g`"
+ fi
+ # Edit out `#line' or `#' directives.
+ #
+ # We don't want the resulting debug information to point at
+ # an absolute srcdir; it is better for it to just mention the
+ # .y file with no path.
+ #
+ # We want to use the real output file name, not yy.lex.c for
+ # instance.
+ #
+ # We want the include guards to be adjusted too.
+ FROM=`echo "$from" | sed \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
+ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
+ TARGET=`echo "$2" | sed \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
+ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
+
+ sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \
+ -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
+
+ # Check whether header files must be updated.
+ if test $first = no; then
+ if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
+ echo "$2" is unchanged
+ rm -f "$target"
+ else
+ echo updating "$2"
+ mv -f "$target" "$realtarget"
+ fi
+ fi
+ else
+ # A missing file is only an error for the first file. This
+ # is a blatant hack to let us support using "yacc -d". If -d
+ # is not specified, we don't want an error when the header
+ # file is "missing".
+ if test $first = yes; then
+ ret=1
+ fi
+ fi
+ shift
+ shift
+ first=no
+ done
+else
+ ret=$?
+fi
+
+# Remove the directory.
+cd ..
+rm -rf $dirname
+
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
This source diff could not be displayed because it is too large. You can view the blob instead.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment