*** empty log message ***

profibus/exp/gsd/src/eurotherm_tc3001_pbslave.gsd

+; Base GSD File for Eurotherm Automation TC Series Thyristor Unit
+; General Information:
+
+#Profibus_DP
+Vendor_Name = "EUROTHERM Automation"
+Model_Name = "TC Series Thyristor Unit"
+Revision = "TC series"			
+Ident_Number = 0x0536			; 0x01 (variant number - do not change)
+Protocol_Ident = 0	                ; PROFIBUS DP
+Station_Type = 0                        ; DP-slave
+FMS_supp = 0
+Hardware_Release = "V1.0"
+Software_Release = "V1.0"
+Redundancy = 0
+Repeater_Ctrl_Sig =0
+24V_Pins = 0
+Implementation_Type = "ASIC_solution"
+Slave_Family = 5			; control group
+Bitmap_Device = "EUR0536"
+Bitmap_Diag   = "EUR0536D"
+Bitmap_SF     = "EUR0536"
+Max_Diag_Data_Len = 16
+
+;Supported Communication Speed:
+
+Auto_Baud_supp = 1
+
+9.6_supp = 1                            ; Max length = 1200m (line type A or B)
+19.2_supp = 1                           ; Max length = 1200m (type A or B)
+93.75_supp = 1                          ; Max length = 1200m (type A or B)
+187.5_supp = 1                          ; Max length = 1000m (type A)
+500_supp = 1                            ; Max length = 400m (type A)
+1.5M_supp = 1                           ; Max length = 200m (type A)
+3M_supp = 1                             ; with wiring precaution
+6M_supp = 1                             ; with wiring precaution
+12M_supp = 1                            ; with wiring precaution
+MaxTsdr_9.6 = 60                        ; unit = tbit
+MaxTsdr_19.2 = 60                       ; unit = tbit
+MaxTsdr_93.75 = 60                      ; unit = tbit
+MaxTsdr_187.5 = 60                      ; unit = tbit
+MaxTsdr_500 = 100                       ; unit = tbit
+MaxTsdr_1.5M = 150                      ; unit = tbit
+MaxTsdr_3M = 250                        ; unit = tbit
+MaxTsdr_6M = 450                        ; unit = tbit
+MaxTsdr_12M = 800                       ; unit = tbit
+
+; DP_Slave Information:
+
+Freeze_Mode_supp = 1
+Sync_Mode_supp = 1
+Set_Slave_Add_supp = 0                  ; Set via instrument UI
+Min_Slave_Intervall = 1			; 100 micro-second
+Modular_Station = 1		        ; for use with several configurators
+Max_Module = 1 
+
+; Parametrization:  ProcessValue, Load Voltage, Phase 1 Current, Phase 2 Current, Phase 3 Current, Line Voltage
+
+User_Prm_Data_Len = 13
+User_Prm_Data = 0x00,0x00,0x11,0x00,0x15,0x00,0x17,0x00,0x18,0x00,0x19,0x00,0x1A
+Max_Input_Len = 32
+Max_Output_Len = 8
+Max_Data_Len = 40
+Module = "TC" 0x53,0x63
+Endmodule