start cleaning out the trash; there is more...

(the Zope 2 makefile does way too much...)

configure

@@ -38,8 +38,7 @@ usage()
 {
     echo
     echo "configure [--help] [--quiet] [--with-python=path] [--prefix=path] "
-    echo "          [--build-base=path] [--ignore-largefile] [--ignore-zlib]"
-    echo "          [--optimize]"
+    echo "          [--ignore-largefile] [--ignore-zlib] [--optimize]"
     echo
     echo " Creates a Makefile suitable for building and installing Zope"
     echo
@@ -48,7 +47,6 @@ usage()
     echo "  --quiet             suppress nonessential output"
     echo "  --with-python       specify a path to a Python interpreter to use"
     echo "  --prefix            specify an installation path for binary data"
-    echo "  --build-base        specify a temporary path for build files"
     echo "  --ignore-largefile  ignore large file support warnings"
     echo "  --ignore-expat      ignore warnings about expat/pyexpat"
     echo "  --ignore-zlib       ignore warnings about zlib"

inst/Makefile.in

@@ -10,17 +10,14 @@ RELEASE_TAG=<<VERSION_RELEASE_TAG>>
 PACKAGE_NAME=${NAME}-${MAJOR_VERSION}.${MINOR_VERSION}-${RELEASE_TAG}
 
 PYTHON="<<PYTHON>>"
+ZPKG=zpkg
 TMPDIR=/tmp
 PREFIX=<<PREFIX>>
 BASE_DIR=<<BASE_DIR>>
-BUILD_BASE=<<BUILD_BASE>>
 DISTUTILS_OPTS=<<DISTUTILS_OPTS>>
 INSTALL_FLAGS=<<INSTALL_FLAGS>>
 TESTOPTS=-v
-BUILD_FLAGS=--build-base="${BUILD_BASE}" \
-            --build-lib="${BUILD_BASE}/build-lib" \
-            --build-scripts="${BUILD_BASE}/build-scripts"\
-            --build-temp="${BUILD_BASE}/build-temp"
+BUILD_FLAGS=-i
 
 RM=rm -f
 RMRF=rm -rf
@@ -32,7 +29,7 @@ CP=cp
 TAR=tar
 MKDIR=mkdir -p
 
-.PHONY : clean install instance untestinst testinst build unbuild
+.PHONY : clean install instance untestinst testinst build
 .PHONY : default
 
 # default:     The default step (invoked when make is called without a target)
@@ -42,36 +39,22 @@ default: build
 	@echo to run a Zope instance directly from the build directory\).
 	@echo
 
-# build:       Do whatever 'setup.py build' implies
+# build:
 build:
 	${PYTHON} "${BASE_DIR}/setup.py" \
-           ${DISTUTILS_OPTS} build ${BUILD_FLAGS}
-
-# unbuild:     Remove the build directory (undo the make build step)
-unbuild:
-	${RMRF} ${BUILD_BASE}
+           ${DISTUTILS_OPTS} build_ext ${BUILD_FLAGS}
 
 # install:     Install a software home.
-install: build version_txt
-	${PYTHON} "${BASE_DIR}/setup.py" ${DISTUTILS_OPTS} install \
-	   --home="${PREFIX}" ${BUILD_FLAGS} ${INSTALL_FLAGS}
+install: version_txt
+	${PYTHON} "${BASE_DIR}/setup.py" ${DISTUTILS_OPTS} \
+	   build_ext ${BUILD_FLAGS} \
+	   install --skip-build --home="${PREFIX}" ${INSTALL_FLAGS}
 	[ -f ${PREFIX}/bin/python ] || ${LN} ${PYTHON} ${PREFIX}/bin/python
 	@echo
 	@echo Zope binaries installed successfully.
 	@echo Now run \'${PREFIX}/bin/mkzopeinstance.py\'
 
 # inplace:     Install a software home into to the source directory.
-#
-# Note: We used to run 'build_ext -i' for 'inplace', but that was
-# suboptimal because it had a tendency to try to rebuild all of the
-# (possibly  already-built) extensions that might be built during a
-# previous 'make' step.  built_ext doesn't understand '--build-base'
-# and friends so we can't stop it from doing this easily.  So instead,
-# we rely on the stock install step and name the prefix as the current
-# directory.  This is a little less efficient than just building the
-# extensions because it also compiles bytecode, but it's more intuitive and
-# less expensive in the common case than letting distutils
-# potentially rebuild the binaries when we've done that already.
 inplace: PREFIX=${BASE_DIR}
 inplace: install
 
@@ -101,7 +84,7 @@ test: inplace
 
 # clean:       Delete the build files and any binaries/bytecode files in
 #              the source directory for good measure.
-clean: unbuild
+clean:
 	${FIND} "${BASE_DIR}" \
          -name '*.py[co]' -o -name '*.so' -o -name '*.o' | ${XARGS} ${RM}
 
@@ -110,23 +93,9 @@ version_txt:
 	printf "Zope ${MAJOR_VERSION}.${MINOR_VERSION}-${RELEASE_TAG}" >\
           "${BASE_DIR}/lib/python/version.txt"
 
-# sdist:       Create a source distribution file (implies clobber).
-#
-sdist: clobber sdist_tgz
-
-# sdist_tgz:   Create a tgz archive file as a source distribution.
-#
-sdist_tgz: version_txt
-	${MKDIR} ${TMPDIR}
-	${CD} ${TMPDIR} && ${LN} ${BASE_DIR} ${PACKAGE_NAME} && \
-          ${TAR} czfh ${BASE_DIR}/${PACKAGE_NAME}.tgz \
-           --exclude=${PACKAGE_NAME}.tgz\
-           --exclude=.svn\
-           --exclude=makefile \
-           --exclude=build-base \
-           --exclude=*~ \
-           --exclude=.#* ${PACKAGE_NAME} 
-	${RMRF} ${TMPDIR}/${PACKAGE_NAME}
+# Building a source distribution requires that zpkg be available:
+sdist:
+	${ZPKG} -C ${BASE_DIR}/releases/Zope2.cfg
 
 # clobber:     Make the source tree 'pristine' again.
 clobber: clean uninstance

inst/configure.py

@@ -33,7 +33,6 @@ def main():
     # below assumes this script is in the BASE_DIR/inst directory
     global PREFIX
     BASE_DIR=os.path.abspath(os.path.dirname(os.path.dirname(sys.argv[0])))
-    BUILD_BASE=os.path.join(os.getcwd(), 'build-base', 'python-%s.%s' % sys.version_info[:2])
     PYTHON=sys.executable
     MAKEFILE=open(os.path.join(BASE_DIR, 'inst', IN_MAKEFILE)).read()
     REQUIRE_LF_ENABLED = 1
@@ -66,8 +65,6 @@ def main():
             INSTALL_FLAGS = '--optimize=1 --no-compile'
         if o == '--no-compile':
             INSTALL_FLAGS = '--no-compile'
-        if o == '--build-base':
-            BUILD_BASE = a
         if o == '--quiet':
             DISTUTILS_OPTS = '-q'
             global QUIET
@@ -85,7 +82,6 @@ def main():
         '<<PYTHON>>':PYTHON,
         '<<PREFIX>>':PREFIX,
         '<<BASE_DIR>>':BASE_DIR,
-        '<<BUILD_BASE>>':BUILD_BASE,
         '<<INSTALL_FLAGS>>':INSTALL_FLAGS,
         '<<ZOPE_MAJOR_VERSION>>':versions.ZOPE_MAJOR_VERSION,
         '<<ZOPE_MINOR_VERSION>>':versions.ZOPE_MINOR_VERSION,