Logical markup.

Improve some index entries.

Doc/lib/libhttplib.tex

 \section{Standard Module \sectcode{httplib}}
 \label{module-httplib}
 \stmodindex{httplib}
-\index{HTTP}
+\indexii{HTTP}{protocol}
 
-\setindexsubitem{(in module httplib)}
 
 This module defines a class which implements the client side of the
 HTTP protocol.  It is normally not used directly --- the module
-\code{urllib} uses it to handle URLs that use HTTP.
-\refstmodindex{urllib}
+\module{urllib}\refstmodindex{urllib} uses it to handle URLs that use
+HTTP.
 
-The module defines one class, \code{HTTP}.  An \code{HTTP} instance
+The module defines one class, \class{HTTP}.  An \class{HTTP} instance
 represents one transaction with an HTTP server.  It should be
 instantiated passing it a host and optional port number.  If no port
 number is passed, the port is extracted from the host string if it has
-the form \code{host:port}, else the default HTTP port (80) is used.
-If no host is passed, no connection is made, and the \code{connect}
-method should be used to connect to a server.  For example, the
-following calls all create instances that connect to the server at the
-same host and port:
+the form \code{\var{host}:\var{port}}, else the default HTTP port (80)
+is used.  If no host is passed, no connection is made, and the
+\method{connect()} method should be used to connect to a server.  For
+example, the following calls all create instances that connect to the
+server at the same host and port:
 
 \begin{verbatim}
 >>> h1 = httplib.HTTP('www.cwi.nl')
 >>> h2 = httplib.HTTP('www.cwi.nl:80')
 >>> h3 = httplib.HTTP('www.cwi.nl', 80)
 \end{verbatim}
-%
-Once an \code{HTTP} instance has been connected to an HTTP server, it
+
+Once an \class{HTTP} instance has been connected to an HTTP server, it
 should be used as follows:
 
 \begin{enumerate}
 
-\item[1.] Make exactly one call to the \code{putrequest()} method.
+\item[1.] Make exactly one call to the \method{putrequest()} method.
 
-\item[2.] Make zero or more calls to the \code{putheader()} method.
+\item[2.] Make zero or more calls to the \method{putheader()} method.
 
-\item[3.] Call the \code{endheaders()} method (this can be omitted if
+\item[3.] Call the \method{endheaders()} method (this can be omitted if
 step 4 makes no calls).
 
-\item[4.] Optional calls to the \code{send()} method.
+\item[4.] Optional calls to the \method{send()} method.
 
-\item[5.] Call the \code{getreply()} method.
+\item[5.] Call the \method{getreply()} method.
 
-\item[6.] Call the \code{getfile()} method and read the data off the
+\item[6.] Call the \method{getfile()} method and read the data off the
 file object that it returns.
 
 \end{enumerate}
 
 \subsection{HTTP Objects}
 
-\code{HTTP} instances have the following methods:
+\class{HTTP} instances have the following methods:
 
 \setindexsubitem{(HTTP method)}
 
@@ -59,7 +58,7 @@ The default debug level is \code{0}, meaning no debugging output is
 printed.
 \end{funcdesc}
 
-\begin{funcdesc}{connect}{host\optional{\, port}}
+\begin{funcdesc}{connect}{host\optional{, port}}
 Connect to the server given by \var{host} and \var{port}.  See the
 intro for the default port.  This should be called directly only if
 the instance was instantiated without passing a host.
@@ -67,18 +66,18 @@ the instance was instantiated without passing a host.
 
 \begin{funcdesc}{send}{data}
 Send data to the server.  This should be used directly only after the
-\code{endheaders()} method has been called and before
-\code{getreply()} has been called.
+\method{endheaders()} method has been called and before
+\method{getreply()} has been called.
 \end{funcdesc}
 
-\begin{funcdesc}{putrequest}{request\, selector}
+\begin{funcdesc}{putrequest}{request, selector}
 This should be the first call after the connection to the server has
 been made.  It sends a line to the server consisting of the
 \var{request} string, the \var{selector} string, and the HTTP version
 (\code{HTTP/1.0}).
 \end{funcdesc}
 
-\begin{funcdesc}{putheader}{header\, argument\optional{\, ...}}
+\begin{funcdesc}{putheader}{header, argument\optional{, ...}}
 Send an \rfc{822} style header to the server.  It sends a line to the
 server consisting of the header, a colon and a space, and the first
 argument.  If more arguments are given, continuation lines are sent,
@@ -91,20 +90,20 @@ Send a blank line to the server, signalling the end of the headers.
 
 \begin{funcdesc}{getreply}{}
 Complete the request by shutting down the sending end of the socket,
-read the reply from the server, and return a triple (\var{replycode},
-\var{message}, \var{headers}).  Here \var{replycode} is the integer
-reply code from the request (e.g.\ \code{200} if the request was
-handled properly); \var{message} is the message string corresponding
-to the reply code; and \var{headers} is an instance of the class
-\code{mimetools.Message} containing the headers received from the server.
-See the description of the \code{mimetools} module.
-\refstmodindex{mimetools}
+read the reply from the server, and return a triple
+\code{(\var{replycode}, \var{message}, \var{headers})}.  Here,
+\var{replycode} is the integer reply code from the request (e.g.\
+\code{200} if the request was handled properly); \var{message} is the
+message string corresponding to the reply code; and \var{headers} is
+an instance of the class \class{mimetools.Message} containing the
+headers received from the server.  See the description of the
+\module{mimetools}\refstmodindex{mimetools} module.
 \end{funcdesc}
 
 \begin{funcdesc}{getfile}{}
 Return a file object from which the data returned by the server can be
-read, using the \code{read()}, \code{readline()} or \code{readlines()}
-methods.
+read, using the \method{read()}, \method{readline()} or
+\method{readlines()} methods.
 \end{funcdesc}
 
 \subsection{Example}

Doc/libhttplib.tex

 \section{Standard Module \sectcode{httplib}}
 \label{module-httplib}
 \stmodindex{httplib}
-\index{HTTP}
+\indexii{HTTP}{protocol}
 
-\setindexsubitem{(in module httplib)}
 
 This module defines a class which implements the client side of the
 HTTP protocol.  It is normally not used directly --- the module
-\code{urllib} uses it to handle URLs that use HTTP.
-\refstmodindex{urllib}
+\module{urllib}\refstmodindex{urllib} uses it to handle URLs that use
+HTTP.
 
-The module defines one class, \code{HTTP}.  An \code{HTTP} instance
+The module defines one class, \class{HTTP}.  An \class{HTTP} instance
 represents one transaction with an HTTP server.  It should be
 instantiated passing it a host and optional port number.  If no port
 number is passed, the port is extracted from the host string if it has
-the form \code{host:port}, else the default HTTP port (80) is used.
-If no host is passed, no connection is made, and the \code{connect}
-method should be used to connect to a server.  For example, the
-following calls all create instances that connect to the server at the
-same host and port:
+the form \code{\var{host}:\var{port}}, else the default HTTP port (80)
+is used.  If no host is passed, no connection is made, and the
+\method{connect()} method should be used to connect to a server.  For
+example, the following calls all create instances that connect to the
+server at the same host and port:
 
 \begin{verbatim}
 >>> h1 = httplib.HTTP('www.cwi.nl')
 >>> h2 = httplib.HTTP('www.cwi.nl:80')
 >>> h3 = httplib.HTTP('www.cwi.nl', 80)
 \end{verbatim}
-%
-Once an \code{HTTP} instance has been connected to an HTTP server, it
+
+Once an \class{HTTP} instance has been connected to an HTTP server, it
 should be used as follows:
 
 \begin{enumerate}
 
-\item[1.] Make exactly one call to the \code{putrequest()} method.
+\item[1.] Make exactly one call to the \method{putrequest()} method.
 
-\item[2.] Make zero or more calls to the \code{putheader()} method.
+\item[2.] Make zero or more calls to the \method{putheader()} method.
 
-\item[3.] Call the \code{endheaders()} method (this can be omitted if
+\item[3.] Call the \method{endheaders()} method (this can be omitted if
 step 4 makes no calls).
 
-\item[4.] Optional calls to the \code{send()} method.
+\item[4.] Optional calls to the \method{send()} method.
 
-\item[5.] Call the \code{getreply()} method.
+\item[5.] Call the \method{getreply()} method.
 
-\item[6.] Call the \code{getfile()} method and read the data off the
+\item[6.] Call the \method{getfile()} method and read the data off the
 file object that it returns.
 
 \end{enumerate}
 
 \subsection{HTTP Objects}
 
-\code{HTTP} instances have the following methods:
+\class{HTTP} instances have the following methods:
 
 \setindexsubitem{(HTTP method)}
 
@@ -59,7 +58,7 @@ The default debug level is \code{0}, meaning no debugging output is
 printed.
 \end{funcdesc}
 
-\begin{funcdesc}{connect}{host\optional{\, port}}
+\begin{funcdesc}{connect}{host\optional{, port}}
 Connect to the server given by \var{host} and \var{port}.  See the
 intro for the default port.  This should be called directly only if
 the instance was instantiated without passing a host.
@@ -67,18 +66,18 @@ the instance was instantiated without passing a host.
 
 \begin{funcdesc}{send}{data}
 Send data to the server.  This should be used directly only after the
-\code{endheaders()} method has been called and before
-\code{getreply()} has been called.
+\method{endheaders()} method has been called and before
+\method{getreply()} has been called.
 \end{funcdesc}
 
-\begin{funcdesc}{putrequest}{request\, selector}
+\begin{funcdesc}{putrequest}{request, selector}
 This should be the first call after the connection to the server has
 been made.  It sends a line to the server consisting of the
 \var{request} string, the \var{selector} string, and the HTTP version
 (\code{HTTP/1.0}).
 \end{funcdesc}
 
-\begin{funcdesc}{putheader}{header\, argument\optional{\, ...}}
+\begin{funcdesc}{putheader}{header, argument\optional{, ...}}
 Send an \rfc{822} style header to the server.  It sends a line to the
 server consisting of the header, a colon and a space, and the first
 argument.  If more arguments are given, continuation lines are sent,
@@ -91,20 +90,20 @@ Send a blank line to the server, signalling the end of the headers.
 
 \begin{funcdesc}{getreply}{}
 Complete the request by shutting down the sending end of the socket,
-read the reply from the server, and return a triple (\var{replycode},
-\var{message}, \var{headers}).  Here \var{replycode} is the integer
-reply code from the request (e.g.\ \code{200} if the request was
-handled properly); \var{message} is the message string corresponding
-to the reply code; and \var{headers} is an instance of the class
-\code{mimetools.Message} containing the headers received from the server.
-See the description of the \code{mimetools} module.
-\refstmodindex{mimetools}
+read the reply from the server, and return a triple
+\code{(\var{replycode}, \var{message}, \var{headers})}.  Here,
+\var{replycode} is the integer reply code from the request (e.g.\
+\code{200} if the request was handled properly); \var{message} is the
+message string corresponding to the reply code; and \var{headers} is
+an instance of the class \class{mimetools.Message} containing the
+headers received from the server.  See the description of the
+\module{mimetools}\refstmodindex{mimetools} module.
 \end{funcdesc}
 
 \begin{funcdesc}{getfile}{}
 Return a file object from which the data returned by the server can be
-read, using the \code{read()}, \code{readline()} or \code{readlines()}
-methods.
+read, using the \method{read()}, \method{readline()} or
+\method{readlines()} methods.
 \end{funcdesc}
 
 \subsection{Example}