Issue #23921: Standardized documentation whitespace formatting.

Original patch by James Edwards.

Doc/distutils/apiref.rst

@@ -1907,9 +1907,9 @@ Subclasses of :class:`Command` must define the following methods.
    that is designed to run with both Python 2.x and 3.x, add::
 
      try:
-        from distutils.command.build_py import build_py_2to3 as build_py
+         from distutils.command.build_py import build_py_2to3 as build_py
      except ImportError:
-        from distutils.command.build_py import build_py
+         from distutils.command.build_py import build_py
 
    to your setup.py, and later::
 

Doc/faq/design.rst

@@ -158,7 +158,7 @@ where in Python you're forced to write this::
        line = f.readline()
        if not line:
            break
-       ... # do something with line
+       ...  # do something with line
 
 The reason for not allowing assignment in Python expressions is a common,
 hard-to-find bug in those other languages, caused by this construct:
@@ -190,7 +190,7 @@ generally less robust than the "while True" solution::
 
    line = f.readline()
    while line:
-       ... # do something with line...
+       ...  # do something with line...
        line = f.readline()
 
 The problem with this is that if you change your mind about exactly how you get
@@ -203,7 +203,7 @@ objects using the ``for`` statement.  For example, :term:`file objects
 <file object>` support the iterator protocol, so you can write simply::
 
    for line in f:
-       ... # do something with line...
+       ...  # do something with line...
 
 
 
@@ -577,8 +577,10 @@ other structure). ::
    class ListWrapper:
        def __init__(self, the_list):
            self.the_list = the_list
+
        def __eq__(self, other):
            return self.the_list == other.the_list
+
        def __hash__(self):
            l = self.the_list
            result = 98767 - len(l)*555
@@ -619,7 +621,7 @@ it and returns it.  For example, here's how to iterate over the keys of a
 dictionary in sorted order::
 
    for key in sorted(mydict):
-       ... # do whatever with mydict[key]...
+       ...  # do whatever with mydict[key]...
 
 
 How do you specify and enforce an interface spec in Python?
@@ -675,11 +677,11 @@ languages.  For example::
    class label(Exception): pass  # declare a label
 
    try:
-        ...
-        if condition: raise label()  # goto label
-        ...
+       ...
+       if condition: raise label()  # goto label
+       ...
    except label:  # where to goto
-        pass
+       pass
    ...
 
 This doesn't allow you to jump into the middle of a loop, but that's usually

Doc/faq/library.rst

@@ -257,7 +257,8 @@ all the threads to finish::
    import threading, time
 
    def thread_task(name, n):
-       for i in range(n): print(name, i)
+       for i in range(n):
+           print(name, i)
 
    for i in range(10):
        T = threading.Thread(target=thread_task, args=(str(i), i))
@@ -273,7 +274,8 @@ A simple fix is to add a tiny sleep to the start of the run function::
 
    def thread_task(name, n):
        time.sleep(0.001)  # <--------------------!
-       for i in range(n): print(name, i)
+       for i in range(n):
+           print(name, i)
 
    for i in range(10):
        T = threading.Thread(target=thread_task, args=(str(i), i))
@@ -502,8 +504,8 @@ in big-endian format from a file::
    import struct
 
    with open(filename, "rb") as f:
-      s = f.read(8)
-      x, y, z = struct.unpack(">hhl", s)
+       s = f.read(8)
+       x, y, z = struct.unpack(">hhl", s)
 
 The '>' in the format string forces big-endian data; the letter 'h' reads one
 "short integer" (2 bytes), and 'l' reads one "long integer" (4 bytes) from the
@@ -681,10 +683,10 @@ Yes. Here's a simple example that uses urllib.request::
 
    import urllib.request
 
-   ### build the query string
+   # build the query string
    qs = "First=Josephine&MI=Q&Last=Public"
 
-   ### connect and send the server a path
+   # connect and send the server a path
    req = urllib.request.urlopen('http://www.some-server.out-there'
                                 '/cgi-bin/some-cgi-script', data=qs)
    with req:
@@ -740,8 +742,9 @@ varies between systems; sometimes it is ``/usr/lib/sendmail``, sometimes
 ``/usr/sbin/sendmail``.  The sendmail manual page will help you out.  Here's
 some sample code::
 
-   SENDMAIL = "/usr/sbin/sendmail"  # sendmail location
    import os
+
+   SENDMAIL = "/usr/sbin/sendmail"  # sendmail location
    p = os.popen("%s -t -i" % SENDMAIL, "w")
    p.write("To: receiver@example.com\n")
    p.write("Subject: test\n")

Doc/faq/programming.rst

@@ -207,7 +207,7 @@ functions), e.g.::
 
    >>> squares = []
    >>> for x in range(5):
-   ...    squares.append(lambda: x**2)
+   ...     squares.append(lambda: x**2)
 
 This gives you a list that contains 5 lambdas that calculate ``x**2``.  You
 might expect that, when called, they would return, respectively, ``0``, ``1``,
@@ -234,7 +234,7 @@ lambdas, so that they don't rely on the value of the global ``x``::
 
    >>> squares = []
    >>> for x in range(5):
-   ...    squares.append(lambda n=x: n**2)
+   ...     squares.append(lambda n=x: n**2)
 
 Here, ``n=x`` creates a new variable ``n`` local to the lambda and computed
 when the lambda is defined so that it has the same value that ``x`` had at
@@ -539,7 +539,7 @@ desired effect in a number of ways.
           args['a'] = 'new-value'     # args is a mutable dictionary
           args['b'] = args['b'] + 1   # change it in-place
 
-      args = {'a':' old-value', 'b': 99}
+      args = {'a': 'old-value', 'b': 99}
       func3(args)
       print(args['a'], args['b'])
 
@@ -655,16 +655,15 @@ Essentially, assignment always binds a name to a value; The same is true of
 ``def`` and ``class`` statements, but in that case the value is a
 callable. Consider the following code::
 
-   class A:
-       pass
-
-   B = A
-
-   a = B()
-   b = a
-   print(b)
+   >>> class A:
+   ...     pass
+   ...
+   >>> B = A
+   >>> a = B()
+   >>> b = a
+   >>> print(b)
    <__main__.A object at 0x16D07CC>
-   print(a)
+   >>> print(a)
    <__main__.A object at 0x16D07CC>
 
 Arguably the class has a name: even though it is bound to two names and invoked
@@ -1099,7 +1098,7 @@ How do I iterate over a sequence in reverse order?
 Use the :func:`reversed` built-in function, which is new in Python 2.4::
 
    for x in reversed(sequence):
-       ... # do something with x...
+       ...  # do something with x ...
 
 This won't touch your original sequence, but build a new copy with reversed
 order to iterate over.
@@ -1107,7 +1106,7 @@ order to iterate over.
 With Python 2.3, you can use an extended slice syntax::
 
    for x in sequence[::-1]:
-       ... # do something with x...
+       ...  # do something with x ...
 
 
 How do you remove duplicates from a list?
@@ -1405,7 +1404,7 @@ A method is a function on some object ``x`` that you normally call as
 definition::
 
    class C:
-       def meth (self, arg):
+       def meth(self, arg):
            return arg * 2 + self.attribute
 
 
@@ -1438,9 +1437,9 @@ that does something::
 
    def search(obj):
        if isinstance(obj, Mailbox):
-           # ... code to search a mailbox
+           ...  # code to search a mailbox
        elif isinstance(obj, Document):
-           # ... code to search a document
+           ...  # code to search a document
        elif ...
 
 A better approach is to define a ``search()`` method on all the classes and just
@@ -1448,11 +1447,11 @@ call it::
 
    class Mailbox:
        def search(self):
-           # ... code to search a mailbox
+           ...  # code to search a mailbox
 
    class Document:
        def search(self):
-           # ... code to search a document
+           ...  # code to search a document
 
    obj.search()
 
@@ -1509,7 +1508,7 @@ How do I call a method defined in a base class from a derived class that overrid
 Use the built-in :func:`super` function::
 
    class Derived(Base):
-       def meth (self):
+       def meth(self):
            super(Derived, self).meth()
 
 For version prior to 3.0, you may be using classic classes: For a class

Doc/howto/descriptor.rst

@@ -104,7 +104,7 @@ like::
         "Emulate type_getattro() in Objects/typeobject.c"
         v = object.__getattribute__(self, key)
         if hasattr(v, '__get__'):
-           return v.__get__(None, self)
+            return v.__get__(None, self)
         return v
 
 The important points to remember are:
@@ -163,9 +163,9 @@ descriptor is useful for monitoring just a few chosen attributes::
             self.val = val
 
     >>> class MyClass(object):
-        x = RevealAccess(10, 'var "x"')
-        y = 5
-
+    ...     x = RevealAccess(10, 'var "x"')
+    ...     y = 5
+    ...
     >>> m = MyClass()
     >>> m.x
     Retrieving var "x"
@@ -287,15 +287,15 @@ this::
 Running the interpreter shows how the function descriptor works in practice::
 
     >>> class D(object):
-         def f(self, x):
-              return x
-
+    ...     def f(self, x):
+    ...         return x
+    ...
     >>> d = D()
-    >>> D.__dict__['f'] # Stored internally as a function
+    >>> D.__dict__['f']  # Stored internally as a function
     <function f at 0x00C45070>
-    >>> D.f             # Get from a class becomes an unbound method
+    >>> D.f              # Get from a class becomes an unbound method
     <unbound method D.f>
-    >>> d.f             # Get from an instance becomes a bound method
+    >>> d.f              # Get from an instance becomes a bound method
     <bound method D.f of <__main__.D object at 0x00B18C90>>
 
 The output suggests that bound and unbound methods are two different types.
@@ -358,10 +358,10 @@ Since staticmethods return the underlying function with no changes, the example
 calls are unexciting::
 
     >>> class E(object):
-         def f(x):
-              print(x)
-         f = staticmethod(f)
-
+    ...     def f(x):
+    ...         print(x)
+    ...     f = staticmethod(f)
+    ...
     >>> print(E.f(3))
     3
     >>> print(E().f(3))
@@ -371,23 +371,23 @@ Using the non-data descriptor protocol, a pure Python version of
 :func:`staticmethod` would look like this::
 
     class StaticMethod(object):
-     "Emulate PyStaticMethod_Type() in Objects/funcobject.c"
+        "Emulate PyStaticMethod_Type() in Objects/funcobject.c"
 
-     def __init__(self, f):
-          self.f = f
+        def __init__(self, f):
+            self.f = f
 
-     def __get__(self, obj, objtype=None):
-          return self.f
+        def __get__(self, obj, objtype=None):
+            return self.f
 
 Unlike static methods, class methods prepend the class reference to the
 argument list before calling the function.  This format is the same
 for whether the caller is an object or a class::
 
     >>> class E(object):
-         def f(klass, x):
-              return klass.__name__, x
-         f = classmethod(f)
-
+    ...     def f(klass, x):
+    ...         return klass.__name__, x
+    ...     f = classmethod(f)
+    ...
     >>> print(E.f(3))
     ('E', 3)
     >>> print(E().f(3))
@@ -419,15 +419,15 @@ Using the non-data descriptor protocol, a pure Python version of
 :func:`classmethod` would look like this::
 
     class ClassMethod(object):
-         "Emulate PyClassMethod_Type() in Objects/funcobject.c"
+        "Emulate PyClassMethod_Type() in Objects/funcobject.c"
 
-         def __init__(self, f):
-              self.f = f
+        def __init__(self, f):
+            self.f = f
 
-         def __get__(self, obj, klass=None):
-              if klass is None:
-                   klass = type(obj)
-              def newfunc(*args):
-                   return self.f(klass, *args)
-              return newfunc
+        def __get__(self, obj, klass=None):
+            if klass is None:
+                klass = type(obj)
+            def newfunc(*args):
+                return self.f(klass, *args)
+            return newfunc
 

Doc/howto/functional.rst

@@ -395,14 +395,14 @@ equivalent to the following Python code::
             continue   # Skip this element
         for expr2 in sequence2:
             if not (condition2):
-                continue    # Skip this element
+                continue   # Skip this element
             ...
             for exprN in sequenceN:
-                 if not (conditionN):
-                     continue   # Skip this element
+                if not (conditionN):
+                    continue   # Skip this element
 
-                 # Output the value of
-                 # the expression.
+                # Output the value of
+                # the expression.
 
 This means that when there are multiple ``for...in`` clauses but no ``if``
 clauses, the length of the resulting output will be equal to the product of the

Doc/howto/logging-cookbook.rst

@@ -63,6 +63,7 @@ Here is the auxiliary module::
         def __init__(self):
             self.logger = logging.getLogger('spam_application.auxiliary.Auxiliary')
             self.logger.info('creating an instance of Auxiliary')
+
         def do_something(self):
             self.logger.info('doing something')
             a = 1 + 1
@@ -360,7 +361,7 @@ classes, which would eat up one thread per handler for no particular benefit.
 
 An example of using these two classes follows (imports omitted)::
 
-    que = queue.Queue(-1) # no limit on size
+    que = queue.Queue(-1)  # no limit on size
     queue_handler = QueueHandler(que)
     handler = logging.StreamHandler()
     listener = QueueListener(que, handler)
@@ -656,21 +657,21 @@ script::
             return True
 
     if __name__ == '__main__':
-       levels = (logging.DEBUG, logging.INFO, logging.WARNING, logging.ERROR, logging.CRITICAL)
-       logging.basicConfig(level=logging.DEBUG,
-                           format='%(asctime)-15s %(name)-5s %(levelname)-8s IP: %(ip)-15s User: %(user)-8s %(message)s')
-       a1 = logging.getLogger('a.b.c')
-       a2 = logging.getLogger('d.e.f')
-
-       f = ContextFilter()
-       a1.addFilter(f)
-       a2.addFilter(f)
-       a1.debug('A debug message')
-       a1.info('An info message with %s', 'some parameters')
-       for x in range(10):
-           lvl = choice(levels)
-           lvlname = logging.getLevelName(lvl)
-           a2.log(lvl, 'A message at %s level with %d %s', lvlname, 2, 'parameters')
+        levels = (logging.DEBUG, logging.INFO, logging.WARNING, logging.ERROR, logging.CRITICAL)
+        logging.basicConfig(level=logging.DEBUG,
+                            format='%(asctime)-15s %(name)-5s %(levelname)-8s IP: %(ip)-15s User: %(user)-8s %(message)s')
+        a1 = logging.getLogger('a.b.c')
+        a2 = logging.getLogger('d.e.f')
+
+        f = ContextFilter()
+        a1.addFilter(f)
+        a2.addFilter(f)
+        a1.debug('A debug message')
+        a1.info('An info message with %s', 'some parameters')
+        for x in range(10):
+            lvl = choice(levels)
+            lvlname = logging.getLevelName(lvl)
+            a2.log(lvl, 'A message at %s level with %d %s', lvlname, 2, 'parameters')
 
 which, when run, produces something like::
 
@@ -764,10 +765,10 @@ the basis for code meeting your own specific requirements::
         while True:
             try:
                 record = queue.get()
-                if record is None: # We send this as a sentinel to tell the listener to quit.
+                if record is None:  # We send this as a sentinel to tell the listener to quit.
                     break
                 logger = logging.getLogger(record.name)
-                logger.handle(record) # No level or filter logic applied - just do it!
+                logger.handle(record)  # No level or filter logic applied - just do it!
             except Exception:
                 import sys, traceback
                 print('Whoops! Problem:', file=sys.stderr)
@@ -790,10 +791,11 @@ the basis for code meeting your own specific requirements::
     # Note that on Windows you can't rely on fork semantics, so each process
     # will run the logging configuration code when it starts.
     def worker_configurer(queue):
-        h = logging.handlers.QueueHandler(queue) # Just the one handler needed
+        h = logging.handlers.QueueHandler(queue)  # Just the one handler needed
         root = logging.getLogger()
         root.addHandler(h)
-        root.setLevel(logging.DEBUG) # send all messages, for demo; no other level or filter logic applied.
+        # send all messages, for demo; no other level or filter logic applied.
+        root.setLevel(logging.DEBUG)
 
     # This is the worker process top-level loop, which just logs ten events with
     # random intervening delays before terminating.
@@ -821,7 +823,7 @@ the basis for code meeting your own specific requirements::
         workers = []
         for i in range(10):
             worker = multiprocessing.Process(target=worker_process,
-                                           args=(queue, worker_configurer))
+                                             args=(queue, worker_configurer))
             workers.append(worker)
             worker.start()
         for w in workers:
@@ -1245,12 +1247,12 @@ You can use a :class:`QueueHandler` subclass to send messages to other kinds
 of queues, for example a ZeroMQ 'publish' socket. In the example below,the
 socket is created separately and passed to the handler (as its 'queue')::
 
-    import zmq # using pyzmq, the Python binding for ZeroMQ
-    import json # for serializing records portably
+    import zmq   # using pyzmq, the Python binding for ZeroMQ
+    import json  # for serializing records portably
 
     ctx = zmq.Context()
-    sock = zmq.Socket(ctx, zmq.PUB) # or zmq.PUSH, or other suitable value
-    sock.bind('tcp://*:5556') # or wherever
+    sock = zmq.Socket(ctx, zmq.PUB)  # or zmq.PUSH, or other suitable value
+    sock.bind('tcp://*:5556')        # or wherever
 
     class ZeroMQSocketHandler(QueueHandler):
         def enqueue(self, record):
@@ -1288,7 +1290,7 @@ of queues, for example a ZeroMQ 'subscribe' socket. Here's an example::
         def __init__(self, uri, *handlers, **kwargs):
             self.ctx = kwargs.get('ctx') or zmq.Context()
             socket = zmq.Socket(self.ctx, zmq.SUB)
-            socket.setsockopt(zmq.SUBSCRIBE, '') # subscribe to everything
+            socket.setsockopt(zmq.SUBSCRIBE, '')  # subscribe to everything
             socket.connect(uri)
 
         def dequeue(self):
@@ -2116,7 +2118,7 @@ class, as shown in the following example::
             Format an exception so that it prints on a single line.
             """
             result = super(OneLineExceptionFormatter, self).formatException(exc_info)
-            return repr(result) # or format into one line however you want to
+            return repr(result)  # or format into one line however you want to
 
         def format(self, record):
             s = super(OneLineExceptionFormatter, self).format(record)

Doc/howto/logging.rst

@@ -103,8 +103,8 @@ A simple example
 A very simple example is::
 
    import logging
-   logging.warning('Watch out!') # will print a message to the console
-   logging.info('I told you so') # will not print anything
+   logging.warning('Watch out!')  # will print a message to the console
+   logging.info('I told you so')  # will not print anything
 
 If you type these lines into a script and run it, you'll see::
 

Doc/howto/regex.rst

@@ -1115,19 +1115,19 @@ which can be either a string or a function, and the string to be processed.
 Here's a simple example of using the :meth:`sub` method.  It replaces colour
 names with the word ``colour``::
 
-   >>> p = re.compile( '(blue|white|red)')
-   >>> p.sub( 'colour', 'blue socks and red shoes')
+   >>> p = re.compile('(blue|white|red)')
+   >>> p.sub('colour', 'blue socks and red shoes')
    'colour socks and colour shoes'
-   >>> p.sub( 'colour', 'blue socks and red shoes', count=1)
+   >>> p.sub('colour', 'blue socks and red shoes', count=1)
    'colour socks and red shoes'
 
 The :meth:`subn` method does the same work, but returns a 2-tuple containing the
 new string value and the number of replacements  that were performed::
 
-   >>> p = re.compile( '(blue|white|red)')
-   >>> p.subn( 'colour', 'blue socks and red shoes')
+   >>> p = re.compile('(blue|white|red)')
+   >>> p.subn('colour', 'blue socks and red shoes')
    ('colour socks and colour shoes', 2)
-   >>> p.subn( 'colour', 'no colours at all')
+   >>> p.subn('colour', 'no colours at all')
    ('no colours at all', 0)
 
 Empty matches are replaced only when they're not adjacent to a previous match.

Doc/howto/unicode.rst

@@ -687,7 +687,7 @@ with the ``surrogateescape`` error handler::
    # make changes to the string 'data'
 
    with open(fname + '.new', 'w',
-              encoding="ascii", errors="surrogateescape") as f:
+             encoding="ascii", errors="surrogateescape") as f:
        f.write(data)
 
 The ``surrogateescape`` error handler will decode any non-ASCII bytes

Doc/howto/urllib2.rst

@@ -175,10 +175,10 @@ Explorer [#]_. ::
 
     url = 'http://www.someserver.com/cgi-bin/register.cgi'
     user_agent = 'Mozilla/5.0 (Windows NT 6.1; Win64; x64)'
-    values = {'name' : 'Michael Foord',
-              'location' : 'Northampton',
-              'language' : 'Python' }
-    headers = { 'User-Agent' : user_agent }
+    values = {'name': 'Michael Foord',
+              'location': 'Northampton',
+              'language': 'Python' }
+    headers = {'User-Agent': user_agent}
 
     data = urllib.parse.urlencode(values)
     data = data.encode('ascii')
@@ -215,7 +215,7 @@ e.g. ::
     >>> req = urllib.request.Request('http://www.pretend_server.org')
     >>> try: urllib.request.urlopen(req)
     ... except urllib.error.URLError as e:
-    ...    print(e.reason)      #doctest: +SKIP
+    ...     print(e.reason)      #doctest: +SKIP
     ...
     (4, 'getaddrinfo failed')
 
@@ -372,7 +372,7 @@ Number 2
 ::
 
     from urllib.request import Request, urlopen
-    from urllib.error import  URLError
+    from urllib.error import URLError
     req = Request(someurl)
     try:
         response = urlopen(req)

Doc/library/argparse.rst

@@ -35,10 +35,10 @@ produces either the sum or the max::
 
    parser = argparse.ArgumentParser(description='Process some integers.')
    parser.add_argument('integers', metavar='N', type=int, nargs='+',
-                      help='an integer for the accumulator')
+                       help='an integer for the accumulator')
    parser.add_argument('--sum', dest='accumulate', action='store_const',
-                      const=sum, default=max,
-                      help='sum the integers (default: find the max)')
+                       const=sum, default=max,
+                       help='sum the integers (default: find the max)')
 
    args = parser.parse_args()
    print(args.accumulate(args.integers))
@@ -488,7 +488,7 @@ specified characters will be treated as files, and will be replaced by the
 arguments they contain.  For example::
 
    >>> with open('args.txt', 'w') as fp:
-   ...    fp.write('-f\nbar')
+   ...     fp.write('-f\nbar')
    >>> parser = argparse.ArgumentParser(fromfile_prefix_chars='@')
    >>> parser.add_argument('-f')
    >>> parser.parse_args(['-f', 'foo', '@args.txt'])
@@ -1109,9 +1109,9 @@ argument::
 
    >>> parser = argparse.ArgumentParser(prog='frobble')
    >>> parser.add_argument('--foo', action='store_true',
-   ...         help='foo the bars before frobbling')
+   ...                     help='foo the bars before frobbling')
    >>> parser.add_argument('bar', nargs='+',
-   ...         help='one of the bars to be frobbled')
+   ...                     help='one of the bars to be frobbled')
    >>> parser.parse_args(['-h'])
    usage: frobble [-h] [--foo] bar [bar ...]
 
@@ -1129,7 +1129,7 @@ specifiers include the program name, ``%(prog)s`` and most keyword arguments to
 
    >>> parser = argparse.ArgumentParser(prog='frobble')
    >>> parser.add_argument('bar', nargs='?', type=int, default=42,
-   ...         help='the bar to %(prog)s (default: %(default)s)')
+   ...                     help='the bar to %(prog)s (default: %(default)s)')
    >>> parser.print_help()
    usage: frobble [-h] [bar]
 
@@ -1468,10 +1468,10 @@ interactive prompt::
    >>> parser = argparse.ArgumentParser()
    >>> parser.add_argument(
    ...     'integers', metavar='int', type=int, choices=range(10),
-   ...  nargs='+', help='an integer in the range 0..9')
+   ...     nargs='+', help='an integer in the range 0..9')
    >>> parser.add_argument(
    ...     '--sum', dest='accumulate', action='store_const', const=sum,
-   ...   default=max, help='sum the integers (default: find the max)')
+   ...     default=max, help='sum the integers (default: find the max)')
    >>> parser.parse_args(['1', '2', '3', '4'])
    Namespace(accumulate=<built-in function max>, integers=[1, 2, 3, 4])
    >>> parser.parse_args(['1', '2', '3', '4', '--sum'])

Doc/library/asynchat.rst

@@ -202,7 +202,7 @@ any extraneous data sent by the web client are ignored. ::
                    self.set_terminator(None)
                    self.handle_request()
            elif not self.handling:
-               self.set_terminator(None) # browsers sometimes over-send
+               self.set_terminator(None)  # browsers sometimes over-send
                self.cgi_data = parse(self.headers, b"".join(self.ibuffer))
                self.handling = True
                self.ibuffer = []

Doc/library/asyncio-sync.rst

@@ -71,14 +71,14 @@ Lock
        lock = Lock()
        ...
        with (yield from lock):
-            ...
+           ...
 
    Lock objects can be tested for locking state::
 
        if not lock.locked():
-          yield from lock
+           yield from lock
        else:
-          # lock is acquired
+           # lock is acquired
            ...
 
    .. method:: locked()

Doc/library/asyncore.rst

@@ -315,8 +315,8 @@ implement its socket handling::
            self.buffer = self.buffer[sent:]
 
 
-    client = HTTPClient('www.python.org', '/')
-    asyncore.loop()
+   client = HTTPClient('www.python.org', '/')
+   asyncore.loop()
 
 .. _asyncore-example-2:
 

Doc/library/audioop.rst

@@ -276,6 +276,6 @@ sample and subtract the whole output sample from the input sample::
        #              out_test)
        prefill = '\0'*(pos+ipos)*2
        postfill = '\0'*(len(inputdata)-len(prefill)-len(outputdata))
-       outputdata = prefill + audioop.mul(outputdata,2,-factor) + postfill
+       outputdata = prefill + audioop.mul(outputdata, 2, -factor) + postfill
        return audioop.add(inputdata, outputdata, 2)
 

Doc/library/collections.abc.rst

@@ -218,19 +218,22 @@ The ABC supplies the remaining methods such as :meth:`__and__` and
 :meth:`isdisjoint`::
 
     class ListBasedSet(collections.abc.Set):
-         ''' Alternate set implementation favoring space over speed
-             and not requiring the set elements to be hashable. '''
-         def __init__(self, iterable):
-             self.elements = lst = []
-             for value in iterable:
-                 if value not in lst:
-                     lst.append(value)
-         def __iter__(self):
-             return iter(self.elements)
-         def __contains__(self, value):
-             return value in self.elements
-         def __len__(self):
-             return len(self.elements)
+        ''' Alternate set implementation favoring space over speed
+            and not requiring the set elements to be hashable. '''
+        def __init__(self, iterable):
+            self.elements = lst = []
+            for value in iterable:
+                if value not in lst:
+                    lst.append(value)
+
+        def __iter__(self):
+            return iter(self.elements)
+
+        def __contains__(self, value):
+            return value in self.elements
+
+        def __len__(self):
+            return len(self.elements)
 
     s1 = ListBasedSet('abcdef')
     s2 = ListBasedSet('defghi')

Doc/library/collections.rst

@@ -1029,7 +1029,7 @@ Since an ordered dictionary remembers its insertion order, it can be used
 in conjunction with sorting to make a sorted dictionary::
 
     >>> # regular unsorted dictionary
-    >>> d = {'banana': 3, 'apple':4, 'pear': 1, 'orange': 2}
+    >>> d = {'banana': 3, 'apple': 4, 'pear': 1, 'orange': 2}
 
     >>> # dictionary sorted by key
     >>> OrderedDict(sorted(d.items(), key=lambda t: t[0]))

Doc/library/concurrent.futures.rst

@@ -99,12 +99,12 @@ the results of another :class:`Future`.  For example::
    import time
    def wait_on_b():
        time.sleep(5)
-       print(b.result()) # b will never complete because it is waiting on a.
+       print(b.result())  # b will never complete because it is waiting on a.
        return 5
 
    def wait_on_a():
        time.sleep(5)
-       print(a.result()) # a will never complete because it is waiting on b.
+       print(a.result())  # a will never complete because it is waiting on b.
        return 6
 
 

Doc/library/configparser.rst

@@ -833,13 +833,13 @@ To get interpolation, use :class:`ConfigParser`::
 
    # Set the optional *raw* argument of get() to True if you wish to disable
    # interpolation in a single get operation.
-   print(cfg.get('Section1', 'foo', raw=False)) # -> "Python is fun!"
-   print(cfg.get('Section1', 'foo', raw=True))  # -> "%(bar)s is %(baz)s!"
+   print(cfg.get('Section1', 'foo', raw=False))  # -> "Python is fun!"
+   print(cfg.get('Section1', 'foo', raw=True))   # -> "%(bar)s is %(baz)s!"
 
    # The optional *vars* argument is a dict with members that will take
    # precedence in interpolation.
    print(cfg.get('Section1', 'foo', vars={'bar': 'Documentation',
-                                             'baz': 'evil'}))
+                                          'baz': 'evil'}))
 
    # The optional *fallback* argument can be used to provide a fallback value
    print(cfg.get('Section1', 'foo'))
@@ -866,10 +866,10 @@ interpolation if an option used is not defined elsewhere. ::
    config = configparser.ConfigParser({'bar': 'Life', 'baz': 'hard'})
    config.read('example.cfg')
 
-   print(config.get('Section1', 'foo')) # -> "Python is fun!"
+   print(config.get('Section1', 'foo'))     # -> "Python is fun!"
    config.remove_option('Section1', 'bar')
    config.remove_option('Section1', 'baz')
-   print(config.get('Section1', 'foo')) # -> "Life is hard!"
+   print(config.get('Section1', 'foo'))     # -> "Life is hard!"
 
 
 .. _configparser-objects:

Doc/library/contextlib.rst

@@ -644,7 +644,7 @@ to yield if an attempt is made to use them a second time::
     Before
     After
     >>> with cm:
-    ...    pass
+    ...     pass
     ...
     Traceback (most recent call last):
         ...

Doc/library/crypt.rst

@@ -149,4 +149,4 @@ check it against the original::
 
    hashed = crypt.crypt(plaintext)
    if not compare_hash(hashed, crypt.crypt(plaintext, hashed)):
-      raise ValueError("hashed version doesn't validate against original")
+       raise ValueError("hashed version doesn't validate against original")

Doc/library/ctypes.rst

@@ -52,11 +52,11 @@ library containing most standard C functions, and uses the cdecl calling
 convention::
 
    >>> from ctypes import *
-   >>> print(windll.kernel32) # doctest: +WINDOWS
+   >>> print(windll.kernel32)  # doctest: +WINDOWS
    <WinDLL 'kernel32', handle ... at ...>
-   >>> print(cdll.msvcrt) # doctest: +WINDOWS
+   >>> print(cdll.msvcrt)      # doctest: +WINDOWS
    <CDLL 'msvcrt', handle ... at ...>
-   >>> libc = cdll.msvcrt # doctest: +WINDOWS
+   >>> libc = cdll.msvcrt      # doctest: +WINDOWS
    >>>
 
 Windows appends the usual ``.dll`` file suffix automatically.
@@ -72,10 +72,10 @@ load a library, so attribute access can not be used to load libraries. Either th
 :meth:`LoadLibrary` method of the dll loaders should be used, or you should load
 the library by creating an instance of CDLL by calling the constructor::
 
-   >>> cdll.LoadLibrary("libc.so.6") # doctest: +LINUX
+   >>> cdll.LoadLibrary("libc.so.6")  # doctest: +LINUX
    <CDLL 'libc.so.6', handle ... at ...>
-   >>> libc = CDLL("libc.so.6")     # doctest: +LINUX
-   >>> libc                         # doctest: +LINUX
+   >>> libc = CDLL("libc.so.6")       # doctest: +LINUX
+   >>> libc                           # doctest: +LINUX
    <CDLL 'libc.so.6', handle ... at ...>
    >>>
 
@@ -92,9 +92,9 @@ Functions are accessed as attributes of dll objects::
    >>> from ctypes import *
    >>> libc.printf
    <_FuncPtr object at 0x...>
-   >>> print(windll.kernel32.GetModuleHandleA) # doctest: +WINDOWS
+   >>> print(windll.kernel32.GetModuleHandleA)  # doctest: +WINDOWS
    <_FuncPtr object at 0x...>
-   >>> print(windll.kernel32.MyOwnFunction) # doctest: +WINDOWS
+   >>> print(windll.kernel32.MyOwnFunction)     # doctest: +WINDOWS
    Traceback (most recent call last):
      File "<stdin>", line 1, in ?
      File "ctypes.py", line 239, in __getattr__
@@ -123,16 +123,16 @@ Sometimes, dlls export functions with names which aren't valid Python
 identifiers, like ``"??2@YAPAXI@Z"``. In this case you have to use
 :func:`getattr` to retrieve the function::
 
-   >>> getattr(cdll.msvcrt, "??2@YAPAXI@Z") # doctest: +WINDOWS
+   >>> getattr(cdll.msvcrt, "??2@YAPAXI@Z")  # doctest: +WINDOWS
    <_FuncPtr object at 0x...>
    >>>
 
 On Windows, some dlls export functions not by name but by ordinal. These
 functions can be accessed by indexing the dll object with the ordinal number::
 
-   >>> cdll.kernel32[1] # doctest: +WINDOWS
+   >>> cdll.kernel32[1]  # doctest: +WINDOWS
    <_FuncPtr object at 0x...>
-   >>> cdll.kernel32[0] # doctest: +WINDOWS
+   >>> cdll.kernel32[0]  # doctest: +WINDOWS
    Traceback (most recent call last):
      File "<stdin>", line 1, in ?
      File "ctypes.py", line 310, in __getitem__
@@ -154,9 +154,9 @@ handle.
 This example calls both functions with a NULL pointer (``None`` should be used
 as the NULL pointer)::
 
-   >>> print(libc.time(None)) # doctest: +SKIP
+   >>> print(libc.time(None))  # doctest: +SKIP
    1150640792
-   >>> print(hex(windll.kernel32.GetModuleHandleA(None))) # doctest: +WINDOWS
+   >>> print(hex(windll.kernel32.GetModuleHandleA(None)))  # doctest: +WINDOWS
    0x1d000000
    >>>
 
@@ -165,11 +165,11 @@ of arguments or the wrong calling convention.  Unfortunately this only works on
 Windows.  It does this by examining the stack after the function returns, so
 although an error is raised the function *has* been called::
 
-   >>> windll.kernel32.GetModuleHandleA() # doctest: +WINDOWS
+   >>> windll.kernel32.GetModuleHandleA()      # doctest: +WINDOWS
    Traceback (most recent call last):
      File "<stdin>", line 1, in ?
    ValueError: Procedure probably called with not enough arguments (4 bytes missing)
-   >>> windll.kernel32.GetModuleHandleA(0, 0) # doctest: +WINDOWS
+   >>> windll.kernel32.GetModuleHandleA(0, 0)  # doctest: +WINDOWS
    Traceback (most recent call last):
      File "<stdin>", line 1, in ?
    ValueError: Procedure probably called with too many arguments (4 bytes in excess)
@@ -178,13 +178,13 @@ although an error is raised the function *has* been called::
 The same exception is raised when you call an ``stdcall`` function with the
 ``cdecl`` calling convention, or vice versa::
 
-   >>> cdll.kernel32.GetModuleHandleA(None) # doctest: +WINDOWS
+   >>> cdll.kernel32.GetModuleHandleA(None)  # doctest: +WINDOWS
    Traceback (most recent call last):
      File "<stdin>", line 1, in ?
    ValueError: Procedure probably called with not enough arguments (4 bytes missing)
    >>>
 
-   >>> windll.msvcrt.printf(b"spam") # doctest: +WINDOWS
+   >>> windll.msvcrt.printf(b"spam")  # doctest: +WINDOWS
    Traceback (most recent call last):
      File "<stdin>", line 1, in ?
    ValueError: Procedure probably called with too many arguments (4 bytes in excess)
@@ -197,7 +197,7 @@ On Windows, :mod:`ctypes` uses win32 structured exception handling to prevent
 crashes from general protection faults when functions are called with invalid
 argument values::
 
-   >>> windll.kernel32.GetModuleHandleA(32) # doctest: +WINDOWS
+   >>> windll.kernel32.GetModuleHandleA(32)  # doctest: +WINDOWS
    Traceback (most recent call last):
      File "<stdin>", line 1, in ?
    OSError: exception: access violation reading 0x00000020
@@ -462,9 +462,9 @@ Here is a more advanced example, it uses the ``strchr`` function, which expects
 a string pointer and a char, and returns a pointer to a string::
 
    >>> strchr = libc.strchr
-   >>> strchr(b"abcdef", ord("d")) # doctest: +SKIP
+   >>> strchr(b"abcdef", ord("d"))  # doctest: +SKIP
    8059983
-   >>> strchr.restype = c_char_p   # c_char_p is a pointer to a string
+   >>> strchr.restype = c_char_p    # c_char_p is a pointer to a string
    >>> strchr(b"abcdef", ord("d"))
    b'def'
    >>> print(strchr(b"abcdef", ord("x")))
@@ -495,17 +495,17 @@ callable will be called with the *integer* the C function returns, and the
 result of this call will be used as the result of your function call. This is
 useful to check for error return values and automatically raise an exception::
 
-   >>> GetModuleHandle = windll.kernel32.GetModuleHandleA # doctest: +WINDOWS
+   >>> GetModuleHandle = windll.kernel32.GetModuleHandleA  # doctest: +WINDOWS
    >>> def ValidHandle(value):
    ...     if value == 0:
    ...         raise WinError()
    ...     return value
    ...
    >>>
-   >>> GetModuleHandle.restype = ValidHandle # doctest: +WINDOWS
-   >>> GetModuleHandle(None) # doctest: +WINDOWS
+   >>> GetModuleHandle.restype = ValidHandle  # doctest: +WINDOWS
+   >>> GetModuleHandle(None)  # doctest: +WINDOWS
    486539264
-   >>> GetModuleHandle("something silly") # doctest: +WINDOWS
+   >>> GetModuleHandle("something silly")  # doctest: +WINDOWS
    Traceback (most recent call last):
      File "<stdin>", line 1, in ?
      File "<stdin>", line 3, in ValidHandle
@@ -676,12 +676,12 @@ POINTs among other stuff::
 
    >>> from ctypes import *
    >>> class POINT(Structure):
-   ...    _fields_ = ("x", c_int), ("y", c_int)
+   ...     _fields_ = ("x", c_int), ("y", c_int)
    ...
    >>> class MyStruct(Structure):
-   ...    _fields_ = [("a", c_int),
-   ...                ("b", c_float),
-   ...                ("point_array", POINT * 4)]
+   ...     _fields_ = [("a", c_int),
+   ...                 ("b", c_float),
+   ...                 ("point_array", POINT * 4)]
    >>>
    >>> print(len(MyStruct().point_array))
    4
@@ -998,7 +998,7 @@ passed::
 
 The result::
 
-   >>> qsort(ia, len(ia), sizeof(c_int), cmp_func) # doctest: +LINUX
+   >>> qsort(ia, len(ia), sizeof(c_int), cmp_func)  # doctest: +LINUX
    py_cmp_func 5 1
    py_cmp_func 33 99
    py_cmp_func 7 33
@@ -1100,9 +1100,9 @@ access violation or whatever, so it's better to break out of the loop when we
 hit the NULL entry::
 
    >>> for item in table:
-   ...    print(item.name, item.size)
-   ...    if item.name is None:
-   ...        break
+   ...     print(item.name, item.size)
+   ...     if item.name is None:
+   ...         break
    ...
    __hello__ 104
    __phello__ -104

Doc/library/email.headerregistry.rst

@@ -171,7 +171,7 @@ headers.
    :class:`~datetime.datetime` instance.  This means, for example, that
    the following code is valid and does what one would expect::
 
-       msg['Date']  = datetime(2011, 7, 15, 21)
+       msg['Date'] = datetime(2011, 7, 15, 21)
 
    Because this is a naive ``datetime`` it will be interpreted as a UTC
    timestamp, and the resulting value will have a timezone of ``-0000``.  Much

Doc/library/getopt.rst

@@ -124,7 +124,7 @@ In a script, typical usage is something like this::
            opts, args = getopt.getopt(sys.argv[1:], "ho:v", ["help", "output="])
        except getopt.GetoptError as err:
            # print help information and exit:
-           print(err) # will print something like "option -a not recognized"
+           print(err)  # will print something like "option -a not recognized"
            usage()
            sys.exit(2)
        output = None

Doc/library/html.parser.rst

@@ -51,8 +51,10 @@ as they are encountered::
    class MyHTMLParser(HTMLParser):
        def handle_starttag(self, tag, attrs):
            print("Encountered a start tag:", tag)
+
        def handle_endtag(self, tag):
            print("Encountered an end tag :", tag)
+
        def handle_data(self, data):
            print("Encountered some data  :", data)
 
@@ -237,21 +239,27 @@ examples::
            print("Start tag:", tag)
            for attr in attrs:
                print("     attr:", attr)
+
        def handle_endtag(self, tag):
            print("End tag  :", tag)
+
        def handle_data(self, data):
            print("Data     :", data)
+
        def handle_comment(self, data):
            print("Comment  :", data)
+
        def handle_entityref(self, name):
            c = chr(name2codepoint[name])
            print("Named ent:", c)
+
        def handle_charref(self, name):
            if name.startswith('x'):
                c = chr(int(name[1:], 16))
            else:
                c = chr(int(name))
            print("Num ent  :", c)
+
        def handle_decl(self, data):
            print("Decl     :", data)
 
@@ -283,7 +291,7 @@ further parsing::
         attr: ('type', 'text/css')
    Data     : #python { color: green }
    End tag  : style
-   >>>
+
    >>> parser.feed('<script type="text/javascript">'
    ...             'alert("<strong>hello!</strong>");</script>')
    Start tag: script

Doc/library/http.client.rst

@@ -441,7 +441,7 @@ Here is an example session that uses the ``GET`` method::
    >>> conn.request("GET", "/")
    >>> r1 = conn.getresponse()
    >>> while not r1.closed:
-   ...     print(r1.read(200)) # 200 bytes
+   ...     print(r1.read(200))  # 200 bytes
    b'<!doctype html>\n<!--[if"...
    ...
    >>> # Example of an invalid request

Doc/library/inspect.rst

@@ -787,7 +787,7 @@ function.
    functions::
 
       def test(a, *, b):
-         ...
+          ...
 
       sig = signature(test)
       ba = sig.bind(10, b=20)

Doc/library/ipaddress.rst

@@ -653,7 +653,7 @@ network.  For iteration, *all* hosts are returned, including unusable hosts
 example::
 
    >>> for addr in IPv4Network('192.0.2.0/28'):
-   ...   addr
+   ...     addr
    ...
    IPv4Address('192.0.2.0')
    IPv4Address('192.0.2.1')

Doc/library/locale.rst

@@ -467,13 +467,13 @@ The :mod:`locale` module defines the following exception and functions:
 Example::
 
    >>> import locale
-   >>> loc = locale.getlocale() # get current locale
+   >>> loc = locale.getlocale()  # get current locale
    # use German locale; name might vary with platform
    >>> locale.setlocale(locale.LC_ALL, 'de_DE')
-   >>> locale.strcoll('f\xe4n', 'foo') # compare a string containing an umlaut
-   >>> locale.setlocale(locale.LC_ALL, '') # use user's preferred locale
-   >>> locale.setlocale(locale.LC_ALL, 'C') # use default (C) locale
-   >>> locale.setlocale(locale.LC_ALL, loc) # restore saved locale
+   >>> locale.strcoll('f\xe4n', 'foo')  # compare a string containing an umlaut
+   >>> locale.setlocale(locale.LC_ALL, '')   # use user's preferred locale
+   >>> locale.setlocale(locale.LC_ALL, 'C')  # use default (C) locale
+   >>> locale.setlocale(locale.LC_ALL, loc)  # restore saved locale
 
 
 Background, details, hints, tips and caveats

Doc/library/mailcap.rst

@@ -70,7 +70,7 @@ standard.  However, mailcap files are supported on most Unix systems.
 An example usage::
 
    >>> import mailcap
-   >>> d=mailcap.getcaps()
+   >>> d = mailcap.getcaps()
    >>> mailcap.findmatch(d, 'video/mpeg', filename='tmp1223')
    ('xmpeg tmp1223', {'view': 'xmpeg %s'})
 

Doc/library/mmap.rst

@@ -144,7 +144,7 @@ To map anonymous memory, -1 should be passed as the fileno along with the length
 
       pid = os.fork()
 
-      if pid == 0: # In a child process
+      if pid == 0:  # In a child process
           mm.seek(0)
           print(mm.readline())
 

Doc/library/multiprocessing.rst

@@ -2663,8 +2663,8 @@ Explicitly pass resources to child processes
             ... do something using "lock" ...
 
         if __name__ == '__main__':
-           lock = Lock()
-           for i in range(10):
+            lock = Lock()
+            for i in range(10):
                 Process(target=f).start()
 
     should be rewritten as ::
@@ -2675,8 +2675,8 @@ Explicitly pass resources to child processes
             ... do something using "l" ...
 
         if __name__ == '__main__':
-           lock = Lock()
-           for i in range(10):
+            lock = Lock()
+            for i in range(10):
                 Process(target=f, args=(lock,)).start()
 
 Beware of replacing :data:`sys.stdin` with a "file like object"

Doc/library/optparse.rst

@@ -25,7 +25,7 @@ GNU/POSIX syntax, and additionally generates usage and help messages for you.
 Here's an example of using :mod:`optparse` in a simple script::
 
    from optparse import OptionParser
-   [...]
+   ...
    parser = OptionParser()
    parser.add_option("-f", "--file", dest="filename",
                      help="write report to FILE", metavar="FILE")
@@ -252,7 +252,7 @@ First, you need to import the OptionParser class; then, early in the main
 program, create an OptionParser instance::
 
    from optparse import OptionParser
-   [...]
+   ...
    parser = OptionParser()
 
 Then you can start defining options.  The basic syntax is::
@@ -718,7 +718,7 @@ you can call :func:`OptionParser.error` to signal an application-defined error
 condition::
 
    (options, args) = parser.parse_args()
-   [...]
+   ...
    if options.a and options.b:
        parser.error("options -a and -b are mutually exclusive")
 
@@ -758,7 +758,7 @@ Putting it all together
 Here's what :mod:`optparse`\ -based scripts usually look like::
 
    from optparse import OptionParser
-   [...]
+   ...
    def main():
        usage = "usage: %prog [options] arg"
        parser = OptionParser(usage)
@@ -768,13 +768,13 @@ Here's what :mod:`optparse`\ -based scripts usually look like::
                          action="store_true", dest="verbose")
        parser.add_option("-q", "--quiet",
                          action="store_false", dest="verbose")
-       [...]
+       ...
        (options, args) = parser.parse_args()
        if len(args) != 1:
            parser.error("incorrect number of arguments")
        if options.verbose:
            print("reading %s..." % options.filename)
-       [...]
+       ...
 
    if __name__ == "__main__":
        main()
@@ -1409,7 +1409,7 @@ If you're not careful, it's easy to define options with conflicting option
 strings::
 
    parser.add_option("-n", "--dry-run", ...)
-   [...]
+   ...
    parser.add_option("-n", "--noisy", ...)
 
 (This is particularly true if you've defined your own OptionParser subclass with
@@ -1450,7 +1450,7 @@ that option.  If the user asks for help, the help message will reflect that::
 
    Options:
      --dry-run     do no harm
-     [...]
+     ...
      -n, --noisy   be noisy
 
 It's possible to whittle away the option strings for a previously-added option
@@ -1465,7 +1465,7 @@ At this point, the original ``-n``/``--dry-run`` option is no longer
 accessible, so :mod:`optparse` removes it, leaving this help text::
 
    Options:
-     [...]
+     ...
      -n, --noisy   be noisy
      --dry-run     new dry-run option
 
@@ -1701,7 +1701,7 @@ seen, but blow up if it comes after ``-b`` in the command-line.  ::
        if parser.values.b:
            raise OptionValueError("can't use -a after -b")
        parser.values.a = 1
-   [...]
+   ...
    parser.add_option("-a", action="callback", callback=check_order)
    parser.add_option("-b", action="store_true", dest="b")
 
@@ -1719,7 +1719,7 @@ message and the flag that it sets must be generalized.  ::
        if parser.values.b:
            raise OptionValueError("can't use %s after -b" % opt_str)
        setattr(parser.values, option.dest, 1)
-   [...]
+   ...
    parser.add_option("-a", action="callback", callback=check_order, dest='a')
    parser.add_option("-b", action="store_true", dest="b")
    parser.add_option("-c", action="callback", callback=check_order, dest='c')
@@ -1739,7 +1739,7 @@ should not be called when the moon is full, all you have to do is this::
            raise OptionValueError("%s option invalid when moon is full"
                                   % opt_str)
        setattr(parser.values, option.dest, 1)
-   [...]
+   ...
    parser.add_option("--foo",
                      action="callback", callback=check_moon, dest="foo")
 
@@ -1762,7 +1762,7 @@ Here's an example that just emulates the standard ``"store"`` action::
 
    def store_value(option, opt_str, value, parser):
        setattr(parser.values, option.dest, value)
-   [...]
+   ...
    parser.add_option("--foo",
                      action="callback", callback=store_value,
                      type="int", nargs=3, dest="foo")
@@ -1824,9 +1824,9 @@ arguments::
         del parser.rargs[:len(value)]
         setattr(parser.values, option.dest, value)
 
-   [...]
-   parser.add_option("-c", "--callback", dest="vararg_attr",
-                     action="callback", callback=vararg_callback)
+    ...
+    parser.add_option("-c", "--callback", dest="vararg_attr",
+                      action="callback", callback=vararg_callback)
 
 
 .. _optparse-extending-optparse:

Doc/library/re.rst

@@ -1234,15 +1234,15 @@ does by default).
 
 For example::
 
-   >>> re.match("c", "abcdef")  # No match
-   >>> re.search("c", "abcdef") # Match
+   >>> re.match("c", "abcdef")    # No match
+   >>> re.search("c", "abcdef")   # Match
    <_sre.SRE_Match object; span=(2, 3), match='c'>
 
 Regular expressions beginning with ``'^'`` can be used with :func:`search` to
 restrict the match at the beginning of the string::
 
-   >>> re.match("c", "abcdef")  # No match
-   >>> re.search("^c", "abcdef") # No match
+   >>> re.match("c", "abcdef")    # No match
+   >>> re.search("^c", "abcdef")  # No match
    >>> re.search("^a", "abcdef")  # Match
    <_sre.SRE_Match object; span=(0, 1), match='a'>
 
@@ -1323,9 +1323,9 @@ a function to "munge" text, or randomize the order of all the characters
 in each word of a sentence except for the first and last characters::
 
    >>> def repl(m):
-   ...   inner_word = list(m.group(2))
-   ...   random.shuffle(inner_word)
-   ...   return m.group(1) + "".join(inner_word) + m.group(3)
+   ...     inner_word = list(m.group(2))
+   ...     random.shuffle(inner_word)
+   ...     return m.group(1) + "".join(inner_word) + m.group(3)
    >>> text = "Professor Abdolmalek, please report your absences promptly."
    >>> re.sub(r"(\w)(\w+)(\w)", repl, text)
    'Poefsrosr Aealmlobdk, pslaee reorpt your abnseces plmrptoy.'
@@ -1405,14 +1405,14 @@ successive matches::
     def tokenize(code):
         keywords = {'IF', 'THEN', 'ENDIF', 'FOR', 'NEXT', 'GOSUB', 'RETURN'}
         token_specification = [
-            ('NUMBER',  r'\d+(\.\d*)?'), # Integer or decimal number
-            ('ASSIGN',  r':='),          # Assignment operator
-            ('END',     r';'),           # Statement terminator
-            ('ID',      r'[A-Za-z]+'),   # Identifiers
-            ('OP',      r'[+\-*/]'),     # Arithmetic operators
-            ('NEWLINE', r'\n'),          # Line endings
-            ('SKIP',    r'[ \t]+'),      # Skip over spaces and tabs
-            ('MISMATCH',r'.'),           # Any other character
+            ('NUMBER',  r'\d+(\.\d*)?'),  # Integer or decimal number
+            ('ASSIGN',  r':='),           # Assignment operator
+            ('END',     r';'),            # Statement terminator
+            ('ID',      r'[A-Za-z]+'),    # Identifiers
+            ('OP',      r'[+\-*/]'),      # Arithmetic operators
+            ('NEWLINE', r'\n'),           # Line endings
+            ('SKIP',    r'[ \t]+'),       # Skip over spaces and tabs
+            ('MISMATCH',r'.'),            # Any other character
         ]
         tok_regex = '|'.join('(?P<%s>%s)' % pair for pair in token_specification)
         line_num = 1

Doc/library/shelve.rst

@@ -165,32 +165,33 @@ object)::
 
    import shelve
 
-   d = shelve.open(filename) # open -- file may get suffix added by low-level
-                             # library
-
-   d[key] = data   # store data at key (overwrites old data if
-                   # using an existing key)
-   data = d[key]   # retrieve a COPY of data at key (raise KeyError if no
-                   # such key)
-   del d[key]      # delete data stored at key (raises KeyError
-                   # if no such key)
-   flag = key in d        # true if the key exists
-   klist = list(d.keys()) # a list of all existing keys (slow!)
+   d = shelve.open(filename)  # open -- file may get suffix added by low-level
+                              # library
+
+   d[key] = data              # store data at key (overwrites old data if
+                              # using an existing key)
+   data = d[key]              # retrieve a COPY of data at key (raise KeyError
+                              # if no such key)
+   del d[key]                 # delete data stored at key (raises KeyError
+                              # if no such key)
+
+   flag = key in d            # true if the key exists
+   klist = list(d.keys())     # a list of all existing keys (slow!)
 
    # as d was opened WITHOUT writeback=True, beware:
-   d['xx'] = [0, 1, 2]    # this works as expected, but...
-   d['xx'].append(3)      # *this doesn't!* -- d['xx'] is STILL [0, 1, 2]!
+   d['xx'] = [0, 1, 2]        # this works as expected, but...
+   d['xx'].append(3)          # *this doesn't!* -- d['xx'] is STILL [0, 1, 2]!
 
    # having opened d without writeback=True, you need to code carefully:
-   temp = d['xx']      # extracts the copy
-   temp.append(5)      # mutates the copy
-   d['xx'] = temp      # stores the copy right back, to persist it
+   temp = d['xx']             # extracts the copy
+   temp.append(5)             # mutates the copy
+   d['xx'] = temp             # stores the copy right back, to persist it
 
    # or, d=shelve.open(filename,writeback=True) would let you just code
    # d['xx'].append(5) and have it work as expected, BUT it would also
    # consume more memory and make the d.close() operation slower.
 
-   d.close()       # close it
+   d.close()                  # close it
 
 
 .. seealso::

Doc/library/ssl.rst

@@ -1585,7 +1585,7 @@ should use the following idiom::
    except ImportError:
        pass
    else:
-       ... # do something that requires SSL support
+       ...  # do something that requires SSL support
 
 Client-side operation
 ^^^^^^^^^^^^^^^^^^^^^

Doc/library/string.rst

@@ -234,12 +234,12 @@ does an index lookup using :func:`__getitem__`.
 
 Some simple format string examples::
 
-   "First, thou shalt count to {0}" # References first positional argument
-   "Bring me a {}"                  # Implicitly references the first positional argument
-   "From {} to {}"                  # Same as "From {0} to {1}"
-   "My quest is {name}"             # References keyword argument 'name'
-   "Weight in tons {0.weight}"      # 'weight' attribute of first positional arg
-   "Units destroyed: {players[0]}"  # First element of keyword argument 'players'.
+   "First, thou shalt count to {0}"  # References first positional argument
+   "Bring me a {}"                   # Implicitly references the first positional argument
+   "From {} to {}"                   # Same as "From {0} to {1}"
+   "My quest is {name}"              # References keyword argument 'name'
+   "Weight in tons {0.weight}"       # 'weight' attribute of first positional arg
+   "Units destroyed: {players[0]}"   # First element of keyword argument 'players'.
 
 The *conversion* field causes a type coercion before formatting.  Normally, the
 job of formatting a value is done by the :meth:`__format__` method of the value

Doc/library/threading.rst

@@ -847,7 +847,7 @@ For example::
        print("hello, world")
 
    t = Timer(30.0, hello)
-   t.start() # after 30 seconds, "hello, world" will be printed
+   t.start()  # after 30 seconds, "hello, world" will be printed
 
 
 .. class:: Timer(interval, function, args=None, kwargs=None)

Doc/library/tkinter.rst

@@ -206,7 +206,7 @@ A Simple Hello World Program
             self.hi_there.pack(side="top")
 
             self.QUIT = tk.Button(self, text="QUIT", fg="red",
-                                                command=root.destroy)
+                                  command=root.destroy)
             self.QUIT.pack(side="bottom")
 
         def say_hi(self):

Doc/library/tokenize.rst

@@ -201,7 +201,7 @@ objects::
         we're only showing 12 digits, and the 13th isn't close to 5, the
         rest of the output should be platform-independent.
 
-        >>> exec(s) #doctest: +ELLIPSIS
+        >>> exec(s)  #doctest: +ELLIPSIS
         -3.21716034272e-0...7
 
         Output from calculations with Decimal should be identical across all
@@ -211,8 +211,8 @@ objects::
         -3.217160342717258261933904529E-7
         """
         result = []
-        g = tokenize(BytesIO(s.encode('utf-8')).readline) # tokenize the string
-        for toknum, tokval, _, _, _  in g:
+        g = tokenize(BytesIO(s.encode('utf-8')).readline)  # tokenize the string
+        for toknum, tokval, _, _, _ in g:
             if toknum == NUMBER and '.' in tokval:  # replace NUMBER tokens
                 result.extend([
                     (NAME, 'Decimal'),

Doc/library/types.rst

@@ -252,10 +252,12 @@ Additional Utility Classes and Functions
        class SimpleNamespace:
            def __init__(self, **kwargs):
                self.__dict__.update(kwargs)
+
            def __repr__(self):
                keys = sorted(self.__dict__)
                items = ("{}={!r}".format(k, self.__dict__[k]) for k in keys)
                return "{}({})".format(type(self).__name__, ", ".join(items))
+
            def __eq__(self, other):
                return self.__dict__ == other.__dict__
 

Doc/library/unittest.rst

@@ -86,19 +86,19 @@ Here is a short script to test three string methods::
 
   class TestStringMethods(unittest.TestCase):
 
-    def test_upper(self):
-        self.assertEqual('foo'.upper(), 'FOO')
-
-    def test_isupper(self):
-        self.assertTrue('FOO'.isupper())
-        self.assertFalse('Foo'.isupper())
-
-    def test_split(self):
-        s = 'hello world'
-        self.assertEqual(s.split(), ['hello', 'world'])
-        # check that s.split fails when the separator is not a string
-        with self.assertRaises(TypeError):
-            s.split(2)
+      def test_upper(self):
+          self.assertEqual('foo'.upper(), 'FOO')
+
+      def test_isupper(self):
+          self.assertTrue('FOO'.isupper())
+          self.assertFalse('Foo'.isupper())
+
+      def test_split(self):
+          s = 'hello world'
+          self.assertEqual(s.split(), ['hello', 'world'])
+          # check that s.split fails when the separator is not a string
+          with self.assertRaises(TypeError):
+              s.split(2)
 
   if __name__ == '__main__':
       unittest.main()

Doc/library/urllib.request.rst

@@ -1174,7 +1174,7 @@ The code for the sample CGI used in the above example is::
 Here is an example of doing a ``PUT`` request using :class:`Request`::
 
     import urllib.request
-    DATA=b'some data'
+    DATA = b'some data'
     req = urllib.request.Request(url='http://localhost:8080', data=DATA,method='PUT')
     with urllib.request.urlopen(req) as f:
         pass

Doc/library/wsgiref.rst

@@ -419,8 +419,8 @@ Paste" library.
       # Our callable object which is intentionally not compliant to the
       # standard, so the validator is going to break
       def simple_app(environ, start_response):
-          status = '200 OK' # HTTP Status
-          headers = [('Content-type', 'text/plain')] # HTTP Headers
+          status = '200 OK'  # HTTP Status
+          headers = [('Content-type', 'text/plain')]  # HTTP Headers
           start_response(status, headers)
 
           # This is going to break because we need to return a list, and
@@ -762,8 +762,8 @@ This is a working "Hello World" WSGI application::
    # is a dictionary containing CGI-style environment variables and the
    # second variable is the callable object (see PEP 333).
    def hello_world_app(environ, start_response):
-       status = '200 OK' # HTTP Status
-       headers = [('Content-type', 'text/plain; charset=utf-8')] # HTTP Headers
+       status = '200 OK'  # HTTP Status
+       headers = [('Content-type', 'text/plain; charset=utf-8')]  # HTTP Headers
        start_response(status, headers)
 
        # The returned object is going to be printed

Doc/library/xml.dom.minidom.rst

@@ -30,10 +30,10 @@ DOM applications typically start by parsing some XML into a DOM.  With
 
    from xml.dom.minidom import parse, parseString
 
-   dom1 = parse('c:\\temp\\mydata.xml') # parse an XML file by name
+   dom1 = parse('c:\\temp\\mydata.xml')  # parse an XML file by name
 
    datasource = open('c:\\temp\\mydata.xml')
-   dom2 = parse(datasource)   # parse an open file
+   dom2 = parse(datasource)  # parse an open file
 
    dom3 = parseString('<myxml>Some data<empty/> some more data</myxml>')
 

Doc/library/xml.etree.elementtree.rst

@@ -94,7 +94,7 @@ As an :class:`Element`, ``root`` has a tag and a dictionary of attributes::
 It also has children nodes over which we can iterate::
 
    >>> for child in root:
-   ...   print(child.tag, child.attrib)
+   ...     print(child.tag, child.attrib)
    ...
    country {'name': 'Liechtenstein'}
    country {'name': 'Singapore'}
@@ -143,8 +143,8 @@ elements, call :meth:`XMLPullParser.read_events`.  Here is an example::
    [('start', <Element 'mytag' at 0x7fa66db2be58>)]
    >>> parser.feed(' more text</mytag>')
    >>> for event, elem in parser.read_events():
-   ...   print(event)
-   ...   print(elem.tag, 'text=', elem.text)
+   ...     print(event)
+   ...     print(elem.tag, 'text=', elem.text)
    ...
    end
 
@@ -166,7 +166,7 @@ the sub-tree below it (its children, their children, and so on).  For example,
 :meth:`Element.iter`::
 
    >>> for neighbor in root.iter('neighbor'):
-   ...   print(neighbor.attrib)
+   ...     print(neighbor.attrib)
    ...
    {'name': 'Austria', 'direction': 'E'}
    {'name': 'Switzerland', 'direction': 'W'}
@@ -180,9 +180,9 @@ with a particular tag, and :attr:`Element.text` accesses the element's text
 content.  :meth:`Element.get` accesses the element's attributes::
 
    >>> for country in root.findall('country'):
-   ...   rank = country.find('rank').text
-   ...   name = country.get('name')
-   ...   print(name, rank)
+   ...     rank = country.find('rank').text
+   ...     name = country.get('name')
+   ...     print(name, rank)
    ...
    Liechtenstein 1
    Singapore 4
@@ -206,9 +206,9 @@ Let's say we want to add one to each country's rank, and add an ``updated``
 attribute to the rank element::
 
    >>> for rank in root.iter('rank'):
-   ...   new_rank = int(rank.text) + 1
-   ...   rank.text = str(new_rank)
-   ...   rank.set('updated', 'yes')
+   ...     new_rank = int(rank.text) + 1
+   ...     rank.text = str(new_rank)
+   ...     rank.set('updated', 'yes')
    ...
    >>> tree.write('output.xml')
 
@@ -244,9 +244,9 @@ We can remove elements using :meth:`Element.remove`.  Let's say we want to
 remove all countries with a rank higher than 50::
 
    >>> for country in root.findall('country'):
-   ...   rank = int(country.find('rank').text)
-   ...   if rank > 50:
-   ...     root.remove(country)
+   ...     rank = int(country.find('rank').text)
+   ...     if rank > 50:
+   ...         root.remove(country)
    ...
    >>> tree.write('output.xml')
 

Doc/library/xmlrpc.client.rst

@@ -216,7 +216,7 @@ A working example follows. The server code::
    from xmlrpc.server import SimpleXMLRPCServer
 
    def is_even(n):
-       return n%2 == 0
+       return n % 2 == 0
 
    server = SimpleXMLRPCServer(("localhost", 8000))
    print("Listening on port 8000...")
@@ -373,7 +373,7 @@ returning a complex type object.  The server code::
 
    # A marshalling error is going to occur because we're returning a
    # complex number
-   def add(x,y):
+   def add(x, y):
        return x+y+0j
 
    server = SimpleXMLRPCServer(("localhost", 8000))
@@ -566,12 +566,15 @@ transport.  The following example shows how:
    class ProxiedTransport(xmlrpc.client.Transport):
        def set_proxy(self, proxy):
            self.proxy = proxy
+
        def make_connection(self, host):
            self.realhost = host
            h = http.client.HTTPConnection(self.proxy)
            return h
+
        def send_request(self, connection, handler, request_body, debug):
            connection.putrequest("POST", 'http://%s%s' % (self.realhost, handler))
+
        def send_host(self, connection, host):
            connection.putheader('Host', self.realhost)
 

Doc/reference/datamodel.rst

@@ -1753,11 +1753,11 @@ to remember the order that class variables are defined::
 
     class OrderedClass(type):
 
-         @classmethod
-         def __prepare__(metacls, name, bases, **kwds):
+        @classmethod
+        def __prepare__(metacls, name, bases, **kwds):
             return collections.OrderedDict()
 
-         def __new__(cls, name, bases, namespace, **kwds):
+        def __new__(cls, name, bases, namespace, **kwds):
             result = type.__new__(cls, name, bases, dict(namespace))
             result.members = tuple(namespace)
             return result

Doc/reference/expressions.rst

@@ -728,7 +728,7 @@ A consequence of this is that although the ``*expression`` syntax may appear
 (and the ``**expression`` argument, if any -- see below).  So::
 
    >>> def f(a, b):
-   ...  print(a, b)
+   ...     print(a, b)
    ...
    >>> f(b=1, *(2,))
    2 1

Doc/reference/simple_stmts.rst

@@ -331,12 +331,12 @@ program:
 The simple form, ``assert expression``, is equivalent to ::
 
    if __debug__:
-      if not expression: raise AssertionError
+       if not expression: raise AssertionError
 
 The extended form, ``assert expression1, expression2``, is equivalent to ::
 
    if __debug__:
-      if not expression1: raise AssertionError(expression2)
+       if not expression1: raise AssertionError(expression2)
 
 .. index::
    single: __debug__

Doc/tutorial/appendix.rst

@@ -92,7 +92,7 @@ in the script::
    filename = os.environ.get('PYTHONSTARTUP')
    if filename and os.path.isfile(filename):
        with open(filename) as fobj:
-          startup_file = fobj.read()
+           startup_file = fobj.read()
        exec(startup_file)
 
 

Doc/tutorial/classes.rst

@@ -162,12 +162,15 @@ binding::
    def scope_test():
        def do_local():
            spam = "local spam"
+
        def do_nonlocal():
            nonlocal spam
            spam = "nonlocal spam"
+
        def do_global():
            global spam
            spam = "global spam"
+
        spam = "test spam"
        do_local()
        print("After local assignment:", spam)
@@ -260,6 +263,7 @@ definition looked like this::
    class MyClass:
        """A simple example class"""
        i = 12345
+
        def f(self):
            return 'hello world'
 
@@ -508,8 +512,10 @@ variable in the class is also ok.  For example::
 
    class C:
        f = f1
+
        def g(self):
            return 'hello world'
+
        h = g
 
 Now ``f``, ``g`` and ``h`` are all attributes of class :class:`C` that refer to
@@ -523,8 +529,10 @@ argument::
    class Bag:
        def __init__(self):
            self.data = []
+
        def add(self, x):
            self.data.append(x)
+
        def addtwice(self, x):
            self.add(x)
            self.add(x)
@@ -713,7 +721,7 @@ will do nicely::
    class Employee:
        pass
 
-   john = Employee() # Create an empty employee record
+   john = Employee()  # Create an empty employee record
 
    # Fill the fields of the record
    john.name = 'John Doe'
@@ -839,8 +847,10 @@ defines :meth:`__next__`, then :meth:`__iter__` can just return ``self``::
        def __init__(self, data):
            self.data = data
            self.index = len(data)
+
        def __iter__(self):
            return self
+
        def __next__(self):
            if self.index == 0:
                raise StopIteration

Doc/tutorial/controlflow.rst

@@ -312,7 +312,7 @@ You can see it if you really want to using :func:`print`::
 It is simple to write a function that returns a list of the numbers of the
 Fibonacci series, instead of printing it::
 
-   >>> def fib2(n): # return Fibonacci series up to n
+   >>> def fib2(n):  # return Fibonacci series up to n
    ...     """Return a list containing the Fibonacci series up to n."""
    ...     result = []
    ...     a, b = 0, 1
@@ -540,7 +540,7 @@ parameter are 'keyword-only' arguments, meaning that they can only be used as
 keywords rather than positional arguments. ::
 
    >>> def concat(*args, sep="/"):
-   ...    return sep.join(args)
+   ...     return sep.join(args)
    ...
    >>> concat("earth", "mars", "venus")
    'earth/mars/venus'

Doc/tutorial/errors.rst

@@ -170,15 +170,15 @@ reference ``.args``.  One may also instantiate an exception first before
 raising it and add any attributes to it as desired. ::
 
    >>> try:
-   ...    raise Exception('spam', 'eggs')
+   ...     raise Exception('spam', 'eggs')
    ... except Exception as inst:
-   ...    print(type(inst))    # the exception instance
-   ...    print(inst.args)     # arguments stored in .args
-   ...    print(inst)          # __str__ allows args to be printed directly,
-   ...                         # but may be overridden in exception subclasses
-   ...    x, y = inst.args     # unpack args
-   ...    print('x =', x)
-   ...    print('y =', y)
+   ...     print(type(inst))    # the exception instance
+   ...     print(inst.args)     # arguments stored in .args
+   ...     print(inst)          # __str__ allows args to be printed directly,
+   ...                          # but may be overridden in exception subclasses
+   ...     x, y = inst.args     # unpack args
+   ...     print('x =', x)
+   ...     print('y =', y)
    ...
    <class 'Exception'>
    ('spam', 'eggs')

Doc/tutorial/inputoutput.rst

@@ -338,11 +338,11 @@ beginning of the file as the reference point. ::
    >>> f = open('workfile', 'rb+')
    >>> f.write(b'0123456789abcdef')
    16
-   >>> f.seek(5)     # Go to the 6th byte in the file
+   >>> f.seek(5)      # Go to the 6th byte in the file
    5
    >>> f.read(1)
    b'5'
-   >>> f.seek(-3, 2) # Go to the 3rd byte before the end
+   >>> f.seek(-3, 2)  # Go to the 3rd byte before the end
    13
    >>> f.read(1)
    b'd'

Doc/tutorial/introduction.rst

@@ -232,7 +232,7 @@ If you want to concatenate variables or a variable and a literal, use ``+``::
 This feature is particularly useful when you want to break long strings::
 
    >>> text = ('Put several strings within parentheses '
-               'to have them joined together.')
+   ...         'to have them joined together.')
    >>> text
    'Put several strings within parentheses to have them joined together.'
 
@@ -276,11 +276,11 @@ makes sure that ``s[:i] + s[i:]`` is always equal to ``s``::
 Slice indices have useful defaults; an omitted first index defaults to zero, an
 omitted second index defaults to the size of the string being sliced. ::
 
-   >>> word[:2]  # character from the beginning to position 2 (excluded)
+   >>> word[:2]   # character from the beginning to position 2 (excluded)
    'Py'
-   >>> word[4:]  # characters from position 4 (included) to the end
+   >>> word[4:]   # characters from position 4 (included) to the end
    'on'
-   >>> word[-2:] # characters from the second-last (included) to the end
+   >>> word[-2:]  # characters from the second-last (included) to the end
    'on'
 
 One way to remember how slices work is to think of the indices as pointing

Doc/tutorial/modules.rst

@@ -34,7 +34,7 @@ called :file:`fibo.py` in the current directory with the following contents::
            a, b = b, a+b
        print()
 
-   def fib2(n): # return Fibonacci series up to n
+   def fib2(n):   # return Fibonacci series up to n
        result = []
        a, b = 0, 1
        while b < n:

Doc/tutorial/stdlib.rst

@@ -301,7 +301,7 @@ file::
            with self.assertRaises(TypeError):
                average(20, 30, 70)
 
-   unittest.main() # Calling from the command line invokes all tests
+   unittest.main()  # Calling from the command line invokes all tests
 
 
 .. _tut-batteries-included:

Doc/tutorial/stdlib2.rst

@@ -180,6 +180,7 @@ tasks in background while the main program continues to run::
            threading.Thread.__init__(self)
            self.infile = infile
            self.outfile = outfile
+
        def run(self):
            f = zipfile.ZipFile(self.outfile, 'w', zipfile.ZIP_DEFLATED)
            f.write(self.infile)

Doc/whatsnew/3.3.rst

@@ -440,15 +440,15 @@ return a final value to the outer generator::
     ...
     >>> tallies = []
     >>> acc = gather_tallies(tallies)
-    >>> next(acc) # Ensure the accumulator is ready to accept values
+    >>> next(acc)  # Ensure the accumulator is ready to accept values
     >>> for i in range(4):
     ...     acc.send(i)
     ...
-    >>> acc.send(None) # Finish the first tally
+    >>> acc.send(None)  # Finish the first tally
     >>> for i in range(5):
     ...     acc.send(i)
     ...
-    >>> acc.send(None) # Finish the second tally
+    >>> acc.send(None)  # Finish the second tally
     >>> tallies
     [6, 10]
 

Doc/whatsnew/3.4.rst

@@ -746,7 +746,7 @@ optional *current_offset*), and the resulting object can be iterated to produce
 method, equivalent to calling :mod:`~dis.dis` on the constructor argument, but
 returned as a multi-line string::
 
-    >>> bytecode = dis.Bytecode(lambda x: x +1, current_offset=3)
+    >>> bytecode = dis.Bytecode(lambda x: x + 1, current_offset=3)
     >>> for instr in bytecode:
     ...     print('{} ({})'.format(instr.opname, instr.opcode))
     LOAD_FAST (124)