Merged revisions 68460 via svnmerge from

svn+ssh://pythondev@svn.python.org/python/trunk

........
  r68460 | kristjan.jonsson | 2009-01-09 14:31:26 -0600 (Fri, 09 Jan 2009) | 1 line

  Issue 4293:  Make Py_AddPendingCall() thread safe
........

Python/ceval.c

@@ -205,6 +205,7 @@ PyEval_GetCallStats(PyObject *self)
 #include "pythread.h"
 
 static PyThread_type_lock interpreter_lock = 0; /* This is the GIL */
+static PyThread_type_lock pending_lock = 0; /* for pending calls */
 static long main_thread = 0;
 
 int
@@ -276,6 +277,7 @@ PyEval_ReInitThreads(void)
 	  adding a new function to each thread_*.h.  Instead, just
 	  create a new lock and waste a little bit of memory */
 	interpreter_lock = PyThread_allocate_lock();
+	pending_lock = PyThread_allocate_lock();
 	PyThread_acquire_lock(interpreter_lock, 1);
 	main_thread = PyThread_get_thread_ident();
 
@@ -348,19 +350,145 @@ PyEval_RestoreThread(PyThreadState *tstate)
 #ifdef WITH_THREAD
    Any thread can schedule pending calls, but only the main thread
    will execute them.
+   There is no facility to schedule calls to a particular thread, but
+   that should be easy to change, should that ever be required.  In
+   that case, the static variables here should go into the python
+   threadstate.
 #endif
+*/
+
+#ifdef WITH_THREAD
+
+/* The WITH_THREAD implementation is thread-safe.  It allows
+   scheduling to be made from any thread, and even from an executing
+   callback.
+ */
+
+#define NPENDINGCALLS 32
+static struct {
+	int (*func)(void *);
+	void *arg;
+} pendingcalls[NPENDINGCALLS];
+static int pendingfirst = 0;
+static int pendinglast = 0;
+static volatile int pendingcalls_to_do = 1; /* trigger initialization of lock */
+static char pendingbusy = 0;
+
+int
+Py_AddPendingCall(int (*func)(void *), void *arg)
+{
+	int i, j, result=0;
+	PyThread_type_lock lock = pending_lock;
+	
+	/* try a few times for the lock.  Since this mechanism is used
+	 * for signal handling (on the main thread), there is a (slim)
+	 * chance that a signal is delivered on the same thread while we
+	 * hold the lock during the Py_MakePendingCalls() function.
+	 * This avoids a deadlock in that case.
+	 * Note that signals can be delivered on any thread.  In particular,
+	 * on Windows, a SIGINT is delivered on a system-created worker
+	 * thread.
+	 * We also check for lock being NULL, in the unlikely case that
+	 * this function is called before any bytecode evaluation takes place.
+	 */
+	if (lock != NULL) {
+		for (i = 0; i<100; i++) {
+			if (PyThread_acquire_lock(lock, NOWAIT_LOCK))
+				break;
+		}
+		if (i == 100)
+			return -1;
+	}
+
+	i = pendinglast;
+	j = (i + 1) % NPENDINGCALLS;
+	if (j == pendingfirst) {
+		result = -1; /* Queue full */
+	} else {
+		pendingcalls[i].func = func;
+		pendingcalls[i].arg = arg;
+		pendinglast = j;
+	}
+	/* signal main loop */
+	_Py_Ticker = 0;
+	pendingcalls_to_do = 1;
+	if (lock != NULL)
+		PyThread_release_lock(lock);
+	return result;
+}
+
+int
+Py_MakePendingCalls(void)
+{
+	int i;
+	int r = 0;
 
-   XXX WARNING!  ASYNCHRONOUSLY EXECUTING CODE!
+	if (!pending_lock) {
+		/* initial allocation of the lock */
+		pending_lock = PyThread_allocate_lock();
+		if (pending_lock == NULL)
+			return -1;
+	}
+
+	/* only service pending calls on main thread */
+	if (main_thread && PyThread_get_thread_ident() != main_thread)
+		return 0; 
+	/* don't perform recursive pending calls */
+	if (pendingbusy)
+		return 0;
+	pendingbusy = 1;
+	/* perform a bounded number of calls, in case of recursion */
+	for (i=0; i<NPENDINGCALLS; i++) {
+		int j;  
+		int (*func)(void *);
+		void *arg;
+		
+		/* pop one item off the queue while holding the lock */
+		PyThread_acquire_lock(pending_lock, WAIT_LOCK);
+		j = pendingfirst;
+		if (j == pendinglast) {
+			func = NULL; /* Queue empty */
+		} else {
+			func = pendingcalls[j].func;
+			arg = pendingcalls[j].arg;
+			pendingfirst = (j + 1) % NPENDINGCALLS;
+		}
+		pendingcalls_to_do = pendingfirst != pendinglast;
+		PyThread_release_lock(pending_lock);
+		/* having released the lock, perform the callback */
+		if (func == NULL)
+			break;
+		r = func(arg);
+		if (r)
+			break;
+	}
+	pendingbusy = 0;
+	return r;
+}
+
+#else /* if ! defined WITH_THREAD */
+
+/*
+   WARNING!  ASYNCHRONOUSLY EXECUTING CODE!
+   This code is used for signal handling in python that isn't built
+   with WITH_THREAD.
+   Don't use this implementation when Py_AddPendingCalls() can happen
+   on a different thread!
+ 
    There are two possible race conditions:
-   (1) nested asynchronous registry calls;
-   (2) registry calls made while pending calls are being processed.
-   While (1) is very unlikely, (2) is a real possibility.
+   (1) nested asynchronous calls to Py_AddPendingCall()
+   (2) AddPendingCall() calls made while pending calls are being processed.
+   
+   (1) is very unlikely because typically signal delivery
+   is blocked during signal handling.  So it should be impossible.
+   (2) is a real possibility.
    The current code is safe against (2), but not against (1).
    The safety against (2) is derived from the fact that only one
-   thread (the main thread) ever takes things out of the queue.
-
-   XXX Darn!  With the advent of thread state, we should have an array
-   of pending calls per thread in the thread state!  Later...
+   thread is present, interrupted by signals, and that the critical
+   section is protected with the "busy" variable.  On Windows, which
+   delivers SIGINT on a system thread, this does not hold and therefore
+   Windows really shouldn't use this version.
+   The two threads could theoretically wiggle around the "busy" variable.
 */
 
 #define NPENDINGCALLS 32
@@ -370,7 +498,7 @@ static struct {
 } pendingcalls[NPENDINGCALLS];
 static volatile int pendingfirst = 0;
 static volatile int pendinglast = 0;
-static volatile int things_to_do = 0;
+static volatile int pendingcalls_to_do = 0;
 
 int
 Py_AddPendingCall(int (*func)(void *), void *arg)
@@ -378,8 +506,6 @@ Py_AddPendingCall(int (*func)(void *), void *arg)
 	static volatile int busy = 0;
 	int i, j;
 	/* XXX Begin critical section */
-	/* XXX If you want this to be safe against nested
-	   XXX asynchronous calls, you'll have to work harder! */
 	if (busy)
 		return -1;
 	busy = 1;
@@ -394,7 +520,7 @@ Py_AddPendingCall(int (*func)(void *), void *arg)
 	pendinglast = j;
 
 	_Py_Ticker = 0;
-	things_to_do = 1; /* Signal main loop */
+	pendingcalls_to_do = 1; /* Signal main loop */
 	busy = 0;
 	/* XXX End critical section */
 	return 0;
@@ -404,14 +530,10 @@ int
 Py_MakePendingCalls(void)
 {
 	static int busy = 0;
-#ifdef WITH_THREAD
-	if (main_thread && PyThread_get_thread_ident() != main_thread)
-		return 0;
-#endif
 	if (busy)
 		return 0;
 	busy = 1;
-	things_to_do = 0;
+	pendingcalls_to_do = 0;
 	for (;;) {
 		int i;
 		int (*func)(void *);
@@ -424,7 +546,7 @@ Py_MakePendingCalls(void)
 		pendingfirst = (i + 1) % NPENDINGCALLS;
 		if (func(arg) < 0) {
 			busy = 0;
-			things_to_do = 1; /* We're not done yet */
+			pendingcalls_to_do = 1; /* We're not done yet */
 			return -1;
 		}
 	}
@@ -432,6 +554,8 @@ Py_MakePendingCalls(void)
 	return 0;
 }
 
+#endif /* WITH_THREAD */
+
 
 /* The interpreter's recursion limit */
 
@@ -518,7 +642,7 @@ static int _Py_TracingPossible = 0;
 /* for manipulating the thread switch and periodic "stuff" - used to be
    per thread, now just a pair o' globals */
 int _Py_CheckInterval = 100;
-volatile int _Py_Ticker = 100;
+volatile int _Py_Ticker = 0; /* so that we hit a "tick" first thing */
 
 PyObject *
 PyEval_EvalCode(PyCodeObject *co, PyObject *globals, PyObject *locals)
@@ -903,7 +1027,7 @@ PyEval_EvalFrameEx(PyFrameObject *f, int throwflag)
 		/* Do periodic things.  Doing this every time through
 		   the loop would add too much overhead, so we do it
 		   only every Nth instruction.  We also do it if
-		   ``things_to_do'' is set, i.e. when an asynchronous
+		   ``pendingcalls_to_do'' is set, i.e. when an asynchronous
 		   event needs attention (e.g. a signal handler or
 		   async I/O handler); see Py_AddPendingCall() and
 		   Py_MakePendingCalls() above. */
@@ -919,12 +1043,12 @@ PyEval_EvalFrameEx(PyFrameObject *f, int throwflag)
 #ifdef WITH_TSC
 			ticked = 1;
 #endif
-			if (things_to_do) {
+			if (pendingcalls_to_do) {
 				if (Py_MakePendingCalls() < 0) {
 					why = WHY_EXCEPTION;
 					goto on_error;
 				}
-				if (things_to_do)
+				if (pendingcalls_to_do)
 					/* MakePendingCalls() didn't succeed.
 					   Force early re-execution of this
 					   "periodic" code, possibly after