Commit 7cbed552 authored by Jason Madden's avatar Jason Madden

Centralize installation documents. Fixes #1210. [skip ci]

I checked with restview --long --pypi and the long description still
renders nicely, as do the pages created by sphinx

I thought the use of .. include:: would make README.rst still render
with all its contents, but sadly github doesn't enable
that (https://github.com/github/markup/issues/172)
parent db623899
...@@ -2,155 +2,26 @@ ...@@ -2,155 +2,26 @@
gevent gevent
======== ========
gevent_ is a coroutine-based Python networking library. .. image:: https://travis-ci.org/gevent/gevent.svg?branch=master
:target: https://travis-ci.org/gevent/gevent
Features include:
* Fast event loop based on libev_ or libuv_.
* Lightweight execution units based on greenlet_.
* Familiar API that re-uses concepts from the Python standard library.
* Cooperative sockets with SSL support.
* DNS queries performed through c-ares_ or a threadpool.
* Ability to use standard library and 3rd party modules written for standard blocking sockets
gevent is `inspired by eventlet`_ but features more consistent API,
simpler implementation and better performance. Read why others `use
gevent`_ and check out the list of the `open source projects based on
gevent`_.
gevent was written by `Denis Bilenko <http://denisbilenko.com/>`_.
Since version 1.1, gevent is maintained by `NextThought
<https://nextthought.com>`_ with help from the `contributors
<https://github.com/gevent/gevent/graphs/contributors>`_ and is
licensed under the MIT license.
See `what's new`_ in the latest major release.
Check out the detailed changelog_ for this version.
Get gevent
==========
gevent runs on Python >= 2.7, Python >= 3.4, or PyPy >= 5.5 (including
PyPy2 and PyPy3). On all platforms, installing setuptools is required
(this is done automatically if working in a virtual environment).
You can use pip to install gevent::
pip install gevent
.. tip:: You need Pip 8.0 or later to install the binary wheels.
.. tip:: You need to install from source, not the manylinux wheels, to
use the libuv backend.
.. tip::
gevent uses :pep:`496` environment markers in ``setup.py``.
Consequently, you'll need a version of setuptools newer than 25
(mid 2016) to install gevent from source. Older versions of pipenv
may also `have issues installing gevent for this reason
<https://github.com/pypa/pipenv/issues/2113>`_.
Download the latest release from `Python Package Index`_ or clone `the repository`_.
Read the documentation online at http://www.gevent.org. Additional
installation information can be found `here <http://www.gevent.org/intro.html#installation-and-requirements>`_.
Post feedback and issues on the `bug tracker`_, `mailing list`_, blog_
and `twitter (@gevent)`_.
Development
===========
To install the latest development version::
pip install setuptools cffi 'cython>=0.27' git+git://github.com/gevent/gevent.git#egg=gevent
To hack on gevent (using a virtualenv)::
$ git clone https://github.com/gevent/gevent.git
$ cd gevent
$ virtualenv env
$ source env/bin/activate
(env) $ pip install -r dev-requirements.txt
.. note::
You must have a C compiler, Cython, and the Python development headers
installed to build a checkout. Installing CFFI on CPython (it's
standard on PyPy) allows building the CFFI backends for testing, and
tox is the command used to test multiple versions of Python.
Running Tests
-------------
There are a few different ways to run the tests. To simply run the
tests on one version of Python during development, try this::
(env) $ pip install -e .
(env) $ cd src/greentest
(env) $ python ./testrunner.py
Before submitting a pull request, it's a good idea to run the tests
across all supported versions of Python, and to check the code quality
using prospector. This is what is done on Travis CI. Locally it
can be done using tox::
pip install tox
tox
The testrunner accepts a ``--coverage`` argument to enable code
coverage metrics through the `coverage.py`_ package. That would go
something like this::
cd src/greentest
python testrunner.py --coverage
coverage combine
coverage html -i
<open htmlcov/index.html>
Builds on Travis CI automatically submit updates to `coveralls.io`_ to .. image:: https://ci.appveyor.com/api/projects/status/q4kl21ng2yo2ixur?svg=true
monitor test coverage. :target: https://ci.appveyor.com/project/denik/gevent
.. image:: https://coveralls.io/repos/gevent/gevent/badge.svg?branch=master&service=github .. image:: https://coveralls.io/repos/gevent/gevent/badge.svg?branch=master&service=github
:target: https://coveralls.io/github/gevent/gevent?branch=master :target: https://coveralls.io/github/gevent/gevent?branch=master
.. note:: On Debian, you will probably need ``libpythonX.Y-testsuite`` .. include:: doc/_about.rst
installed to run all the tests.
Continuous integration Read the documentation online at http://www.gevent.org.
----------------------
A test suite is run for every push and pull request submitted. Travis Post feedback and issues on the `bug tracker`_, `mailing list`_, blog_
CI is used to test on Linux, and `AppVeyor`_ runs the builds on and `twitter (@gevent)`_.
Windows.
.. image:: https://travis-ci.org/gevent/gevent.svg?branch=master
:target: https://travis-ci.org/gevent/gevent
.. image:: https://ci.appveyor.com/api/projects/status/q4kl21ng2yo2ixur?svg=true .. include:: doc/install.rst
:target: https://ci.appveyor.com/project/denik/gevent
.. _gevent: http://www.gevent.org
.. _greenlet: http://pypi.python.org/pypi/greenlet
.. _libev: http://libev.schmorp.de/
.. _libuv: http://libuv.org/
.. _c-ares: http://c-ares.haxx.se/
.. _inspired by eventlet: http://blog.gevent.org/2010/02/27/why-gevent/
.. _use gevent: http://groups.google.com/group/gevent/browse_thread/thread/4de9703e5dca8271
.. _open source projects based on gevent: https://github.com/gevent/gevent/wiki/Projects
.. _Python Package Index: http://pypi.python.org/pypi/gevent
.. _the repository: https://github.com/gevent/gevent
.. _bug tracker: https://github.com/gevent/gevent/wiki/Projects .. _bug tracker: https://github.com/gevent/gevent/wiki/Projects
.. _mailing list: http://groups.google.com/group/gevent .. _mailing list: http://groups.google.com/group/gevent
.. _blog: http://blog.gevent.org .. _blog: http://blog.gevent.org
.. _twitter (@gevent): http://twitter.com/gevent .. _twitter (@gevent): http://twitter.com/gevent
.. _coverage.py: https://pypi.python.org/pypi/coverage/
.. _coveralls.io: https://coveralls.io/github/gevent/gevent
.. _AppVeyor: https://ci.appveyor.com/project/denik/gevent
.. _what's new: http://www.gevent.org/whatsnew_1_3.html
.. _changelog: http://www.gevent.org/changelog.html
...@@ -42,10 +42,10 @@ THIS_DIR = os.path.dirname(__file__) ...@@ -42,10 +42,10 @@ THIS_DIR = os.path.dirname(__file__)
def quoted_abspath(*segments): def quoted_abspath(*segments):
return '"' + os.path.abspath(os.path.join(*segments)) + '"' return '"' + os.path.abspath(os.path.join(*segments)) + '"'
def read(name, *args): def read(*names):
"""Read a file path relative to this file.""" """Read a file path relative to this file."""
with open(os.path.join(THIS_DIR, name)) as f: with open(os.path.join(THIS_DIR, *names)) as f:
return f.read(*args) return f.read()
def read_version(name="src/gevent/__init__.py"): def read_version(name="src/gevent/__init__.py"):
contents = read(name) contents = read(name)
......
..
This file is included in README.rst from the top-level
so it is limited to pure ReST markup, not Sphinx.
gevent is a coroutine_ -based Python_ networking library that uses gevent is a coroutine_ -based Python_ networking library that uses
greenlet_ to provide a high-level synchronous API on top of the `libev`_ `greenlet <https://greenlet.readthedocs.io>`_ to provide a high-level synchronous API on top of the `libev`_
or `libuv`_ event loop. or `libuv`_ event loop.
Features include: Features include:
* Fast event loop based on `libev`_ or `libuv`_ * Fast event loop based on `libev`_ or `libuv`_.
* Lightweight execution units based on greenlet_. * Lightweight execution units based on greenlets.
* API that re-uses concepts from the Python standard library (for * API that re-uses concepts from the Python standard library (for
examples there are :class:`events <gevent.event.Event>` and examples there are `events`_ and
:class:`queues <gevent.queue.Queue>`). `queues`_).
* :ref:`Cooperative sockets with SSL support <networking>` * `Cooperative sockets with SSL support <http://www.gevent.org/api/index.html#networking>`_
* :doc:`Cooperative DNS queries <dns>` performed through a threadpool, * `Cooperative DNS queries <http://www.gevent.org/dns.html>`_ performed through a threadpool,
dnspython, or c-ares. dnspython, or c-ares.
* :ref:`Monkey patching utility <monkey-patching>` to get 3rd party modules to become cooperative * `Monkey patching utility <http://www.gevent.org/intro.html#monkey-patching>`_ to get 3rd party modules to become cooperative
* TCP/UDP/HTTP servers * TCP/UDP/HTTP servers
* Subprocess support (through :mod:`gevent.subprocess`) * Subprocess support (through `gevent.subprocess`_)
* Thread pools * Thread pools
gevent is `inspired by eventlet`_ but features a more consistent API,
simpler implementation and better performance. Read why others `use
gevent`_ and check out the list of the `open source projects based on
gevent`_.
gevent was written by `Denis Bilenko <http://denisbilenko.com/>`_.
Since version 1.1, gevent is maintained by Jason Madden for
`NextThought <https://nextthought.com>`_ with help from the
`contributors <https://github.com/gevent/gevent/graphs/contributors>`_
and is licensed under the MIT license.
See `what's new`_ in the latest major release.
Check out the detailed changelog_ for this version.
.. _events: http://www.gevent.org/api/gevent.event.html#gevent.event.Event
.. _queues: http://www.gevent.org/api/gevent.queue.html#gevent.queue.Queue
.. _gevent.subprocess: http://www.gevent.org/api/gevent.subprocess.html#module-gevent.subprocess
.. _coroutine: https://en.wikipedia.org/wiki/Coroutine .. _coroutine: https://en.wikipedia.org/wiki/Coroutine
.. _Python: http://python.org .. _Python: http://python.org
.. _greenlet: https://greenlet.readthedocs.io
.. _libev: http://software.schmorp.de/pkg/libev.html .. _libev: http://software.schmorp.de/pkg/libev.html
.. _libuv: http://libuv.org .. _libuv: http://libuv.org
.. _inspired by eventlet: http://blog.gevent.org/2010/02/27/why-gevent/
.. _use gevent: http://groups.google.com/group/gevent/browse_thread/thread/4de9703e5dca8271
.. _open source projects based on gevent: https://github.com/gevent/gevent/wiki/Projects
.. _what's new: http://www.gevent.org/whatsnew_1_3.html
.. _changelog: http://www.gevent.org/changelog.html
...@@ -8,6 +8,7 @@ Introduction and Basics ...@@ -8,6 +8,7 @@ Introduction and Basics
.. toctree:: .. toctree::
:maxdepth: 2 :maxdepth: 2
install
intro intro
whatsnew_1_3 whatsnew_1_3
api/gevent api/gevent
......
...@@ -5,20 +5,6 @@ ...@@ -5,20 +5,6 @@
.. include:: _about.rst .. include:: _about.rst
gevent is `inspired by eventlet
<http://blog.gevent.org/2010/02/27/why-gevent/>`_ but features more
consistent API, simpler implementation and better performance. Read
why others `use gevent
<http://groups.google.com/group/gevent/browse_thread/thread/4de9703e5dca8271>`_
and check out the list of the `open source projects based on gevent. <https://github.com/gevent/gevent/wiki/Projects>`_
gevent was written by `Denis Bilenko <http://denisbilenko.com/>`_.
Since version 1.1, gevent is maintained by Jason Madden for
`NextThought <https://nextthought.com>`_ with help from the
`contributors <https://github.com/gevent/gevent/graphs/contributors>`_.
gevent is licensed under the MIT license.
:ref:`Continue reading <installation>` » :ref:`Continue reading <installation>` »
......
===============================
Installation and Requirements
===============================
.. _installation:
..
This file is included in README.rst so it is limited to plain
ReST markup, not Sphinx.
Supported Platforms
===================
`gevent 1.3`_ runs on Python 2.7 and Python 3. Releases 3.4, 3.5 and
3.6 of Python 3 are supported. (Users of older versions of Python 2
need to install gevent 1.0.x (2.5), 1.1.x (2.6) or 1.2.x (<=2.7.8);
gevent 1.2 can be installed on Python 3.3.) gevent requires the
`greenlet <https://greenlet.readthedocs.io>`_ library and will install
the `cffi`_ library by default on Windows.
gevent 1.3 also runs on PyPy 5.5 and above, although 5.9 or above is
strongly recommended. On PyPy, there are no external dependencies.
gevent is tested on Windows, OS X, and Linux, and should run on most
other Unix-like operating systems (e.g., FreeBSD, Solaris, etc.)
.. note:: On Windows using the libev backend, gevent is
limited to a maximum of 1024 open sockets due to
`limitations in libev`_. This limitation should not exist
with the default libuv backend.
Installation
============
.. note::
This section is about installing released versions of gevent
as distributed on the `Python Package Index`_
.. _Python Package Index: http://pypi.org/project/gevent
gevent and greenlet can both be installed with `pip`_, e.g., ``pip
install gevent``. Installation using `buildout
<http://docs.buildout.org/en/latest/>`_ is also supported.
On Windows, OS X, and Linux, both gevent and greenlet are
distributed as binary `wheels`_.
.. tip::
You need Pip 8.0 or later, or buildout 2.10.0 to install the
binary wheels.
.. tip::
On Linux, you'll need to install gevent from source if you wish to
use the libuv loop implementation. This is because the `manylinux1
<https://www.python.org/dev/peps/pep-0513/>`_ specification for the
distributed wheels does not support libuv. The `cffi`_ library
*must* be installed at build time.
Installing From Source
----------------------
If you are unable to use the binary wheels (for platforms where no
pre-built wheels are available or if wheel installation is disabled,
e.g., for libuv support on Linux), here are some things you need to know.
- You can install gevent from source with ``pip install --no-binary
gevent gevent``.
- You'll need a working C compiler that can build Python extensions.
On some platforms, you may need to install Python development
packages.
- Installing from source requires ``setuptools``. This is installed
automatically in virtual environments and by buildout. However, gevent uses
:pep:`496` environment markers in ``setup.py``. Consequently, you'll
need a version of setuptools newer than 25 (mid 2016) to install
gevent from source. Older versions of pipenv may also `have issues
installing gevent for this reason
<https://github.com/pypa/pipenv/issues/2113>`_.
- To build the libuv backend (which is required on Windows and
optional elsewhere), or the CFFI-based libev backend, you must
install `cffi`_ before attempting to install gevent on CPython (on
PyPy this step is not necessary).
Common Installation Issues
--------------------------
The following are some common installation problems and solutions for
those compiling gevent from source.
- Some Linux distributions are now mounting their temporary
directories with the ``noexec`` option. This can cause a standard
``pip install gevent`` to fail with an error like ``cannot run C
compiled programs``. One fix is to mount the temporary directory
without that option. Another may be to use the ``--build`` option to
``pip install`` to specify another directory. See `issue #570
<https://github.com/gevent/gevent/issues/570>`_ and `issue #612
<https://github.com/gevent/gevent/issues/612>`_ for examples.
- Also check for conflicts with environment variables like ``CFLAGS``. For
example, see `Library Updates <http://www.gevent.org/whatsnew_1_1.html#library-updates-label>`_.
- Users of a recent SmartOS release may need to customize the
``CPPFLAGS`` (the environment variable containing the default
options for the C preprocessor) if they are using the libev shipped
with gevent. See `Operating Systems
<http://www.gevent.org/whatsnew_1_1.html#operating-systems-label>`_
for more information.
Extra Dependencies
==================
gevent has no runtime dependencies outside the standard library,
greenlet and (on some platforms) `cffi`_. However, there are a
number of additional libraries that extend gevent's functionality and
will be used if they are available.
The `psutil <https://pypi.org/project/psutil>`_ library is needed to
monitor memory usage.
`zope.event <https://pypi.org/project/zope.event>`_ is highly
recommended for configurable event support; it can be installed with
the ``events`` extra, e.g., ``pip install gevent[events]``.
`dnspython <https://pypi.org/project/dnspython>`_ is required for the
new pure-Python resolver, and on Python 2, so is `idna
<https://pypi.org/project/idna>`_. They can be installed with the
``dnspython`` extra.
Development
===========
To install the latest development version::
pip install setuptools cffi 'cython>=0.28' git+git://github.com/gevent/gevent.git#egg=gevent
.. note::
You will not be able to run gevent's test suite using that method.
To hack on gevent (using a virtualenv)::
$ git clone https://github.com/gevent/gevent.git
$ cd gevent
$ virtualenv env
$ source env/bin/activate
(env) $ pip install -r dev-requirements.txt
.. note::
The notes above about installing from source apply here as well.
The ``dev-requirements.txt`` file takes care of the library
prerequisites (CFFI, Cython), but having a working C compiler that
can create Python extensions is up to you.
Running Tests
-------------
There are a few different ways to run the tests. To simply run the
tests on one version of Python during development, begin with the
above instructions to install gevent in a virtual environment and then
run::
(env) $ cd src/greentest
(env) $ python ./testrunner.py
Before submitting a pull request, it's a good idea to run the tests
across all supported versions of Python, and to check the code quality
using prospector. This is what is done on Travis CI. Locally it
can be done using tox::
pip install tox
tox
The testrunner accepts a ``--coverage`` argument to enable code
coverage metrics through the `coverage.py`_ package. That would go
something like this::
cd src/greentest
python testrunner.py --coverage
coverage combine
coverage html -i
<open htmlcov/index.html>
Continuous integration
----------------------
A test suite is run for every push and pull request submitted. Travis
CI is used to test on Linux, and `AppVeyor`_ runs the builds on
Windows.
.. image:: https://travis-ci.org/gevent/gevent.svg?branch=master
:target: https://travis-ci.org/gevent/gevent
.. image:: https://ci.appveyor.com/api/projects/status/q4kl21ng2yo2ixur?svg=true
:target: https://ci.appveyor.com/project/denik/gevent
Builds on Travis CI automatically submit updates to `coveralls.io`_ to
monitor test coverage.
.. image:: https://coveralls.io/repos/gevent/gevent/badge.svg?branch=master&service=github
:target: https://coveralls.io/github/gevent/gevent?branch=master
.. note:: On Debian, you will probably need ``libpythonX.Y-testsuite``
installed to run all the tests.
.. _coverage.py: https://pypi.python.org/pypi/coverage/
.. _coveralls.io: https://coveralls.io/github/gevent/gevent
.. _`pip`: https://pip.pypa.io/en/stable/installing/
.. _`wheels`: http://pythonwheels.com
.. _`gevent 1.3`: whatsnew_1_3.html
.. _`cffi`: https://cffi.readthedocs.io
.. _`limitations in libev`: http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod#WIN32_PLATFORM_LIMITATIONS_AND_WORKA
.. _AppVeyor: https://ci.appveyor.com/project/denik/gevent
...@@ -4,100 +4,6 @@ ...@@ -4,100 +4,6 @@
.. include:: _about.rst .. include:: _about.rst
.. _installation:
Installation and Requirements
=============================
`gevent 1.3`_ runs on Python 2.7 and Python 3. Releases 3.4, 3.5 and
3.6 of Python 3 are supported. (Users of older versions of Python 2
need to install gevent 1.0.x (2.5), 1.1.x (2.6) or 1.2.x (<=2.7.8);
gevent 1.2 can be installed on Python 3.3.) gevent requires the
greenlet__ library and will install the `cffi`_ library by default on
Windows.
gevent 1.3 also runs on PyPy 5.5 and above, although 5.9 or above is
strongly recommended. On PyPy, there are no external dependencies.
gevent is tested on Windows, OS X, and Linux, and should run on most
other Unix-like operating systems (e.g., FreeBSD, Solaris, etc.)
.. note:: On Windows using the libev backend, gevent is
limited to a maximum of 1024 open sockets due to
`limitations in libev`_. This limitation should not exist
with the default libuv backend.
gevent and greenlet can both be installed with `pip`_, e.g., ``pip
install gevent``. On Windows, OS X, and Linux, both gevent and greenlet are
distributed as binary `wheels`_, so no C compiler is required (so long
as pip is at least version 8.0). For other platforms
without pre-built wheels or if wheel installation is disabled, a C compiler
(Xcode on OS X) and the Python development package are required.
`cffi`_ can optionally be installed to build the CFFI backend in
addition to the Cython backend on CPython; it is necessary to use the
libuv backend.
.. note::
On Linux, you'll need to install gevent from source if you wish to
use the libuv loop implementation. This is because the `manylinux1
<https://www.python.org/dev/peps/pep-0513/>`_ specification for the
distributed wheels does not support libuv. The `cffi`_ library
*must* be installed at build time.
.. note::
gevent uses :pep:`496` environment markers in ``setup.py``.
Consequently, you'll need a version of setuptools newer than 25
(mid 2016) to install gevent from source. Older versions of pipenv
may also `have issues installing gevent for this reason
<https://github.com/pypa/pipenv/issues/2113>`_.
The `psutil <https://pypi.org/project/psutil>`_ library is needed to
monitor memory usage.
`zope.event <https://pypi.org/project/zope.event>`_ is highly
recommended for configurable event support; it can be installed with
the ``events`` extra, e.g., ``pip install gevent[events]``.
`dnspython <https://pypi.org/project/dnspython>`_ is required for the
new pure-Python resolver, and on Python 2, so is `idna
<https://pypi.org/project/idna>`_. They can be installed with the
``dnspython`` extra.
Development instructions (including building from a source checkout)
can be found `on PyPI <https://pypi.org/project/gevent#development>`_.
__ http://pypi.python.org/pypi/greenlet
.. _`pip`: https://pip.pypa.io/en/stable/installing/
.. _`wheels`: http://pythonwheels.com
.. _`gevent 1.3`: whatsnew_1_3.html
.. _`cffi`: https://cffi.readthedocs.io
.. _`limitations in libev`: http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod#WIN32_PLATFORM_LIMITATIONS_AND_WORKA
Common Installation Issues
--------------------------
The following are some common installation problems and solutions for
those compiling gevent from source.
- Some Linux distributions are now mounting their temporary
directories with the ``noexec`` option. This can cause a
standard ``pip install gevent`` to fail with an error like
``cannot run C compiled programs``. One fix is to mount the
temporary directory without that option. Another may be to
use the ``--build`` option to ``pip install`` to specify
another directory. See :issue:`570` and :issue:`612` for
examples.
- Also check for conflicts with environment variables like ``CFLAGS``. For
example, see :ref:`library_updates_label`.
- Users of a recent SmartOS release may need to customize
the ``CPPFLAGS`` (the environment variable containing the
default options for the C preprocessor) if they are using the
libev shipped with gevent. See :ref:`operating_systems_label` for
more information.
Example Example
======= =======
......
...@@ -293,6 +293,17 @@ if ((len(sys.argv) >= 2 ...@@ -293,6 +293,17 @@ if ((len(sys.argv) >= 2
or __name__ != '__main__'): or __name__ != '__main__'):
_BUILDING = False _BUILDING = False
def make_long_description():
readme = read('README.rst')
about = read('doc', '_about.rst')
install = read('doc', 'install.rst')
readme = readme.replace('.. include:: doc/_about.rst',
about)
readme = readme.replace('.. include:: doc/install.rst',
install)
return readme
def run_setup(ext_modules, run_make): def run_setup(ext_modules, run_make):
if run_make: if run_make:
...@@ -308,7 +319,7 @@ def run_setup(ext_modules, run_make): ...@@ -308,7 +319,7 @@ def run_setup(ext_modules, run_make):
name='gevent', name='gevent',
version=__version__, version=__version__,
description='Coroutine-based network library', description='Coroutine-based network library',
long_description=read('README.rst'), long_description=make_long_description(),
license='MIT', license='MIT',
keywords='greenlet coroutine cooperative multitasking light threads monkey', keywords='greenlet coroutine cooperative multitasking light threads monkey',
author='Denis Bilenko', author='Denis Bilenko',
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment