- 05 Nov, 2015 7 commits
-
-
Ian Lance Taylor authored
Put 'r' first because that is the command, and 'c' is the modifier. Keep 'c' because it means to not warn when creating an archive. Drop 'u' because it is unnecessary and fails on Arch Linux. No test because this is only for gccgo (I tested it manually). Fixes #12310. Change-Id: Id740257fb1c347dfaa60f7d613af2897dae2c059 Reviewed-on: https://go-review.googlesource.com/16664 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
David Crawshaw <crawshaw@golang.org>
-
Ilya Tocar authored
Use AVX2 if possible. Results below (haswell): name old time/op new time/op delta CompareStringEqual-6 8.77ns ± 0% 8.63ns ± 1% -1.58% (p=0.000 n=20+19) CompareStringIdentical-6 5.02ns ± 0% 5.02ns ± 0% ~ (all samples are equal) CompareStringSameLength-6 7.51ns ± 0% 7.51ns ± 0% ~ (all samples are equal) CompareStringDifferentLength-6 1.56ns ± 0% 1.56ns ± 0% ~ (all samples are equal) CompareStringBigUnaligned-6 124µs ± 1% 105µs ± 5% -14.99% (p=0.000 n=20+18) CompareStringBig-6 112µs ± 1% 103µs ± 0% -7.87% (p=0.000 n=20+17) name old speed new speed delta CompareStringBigUnaligned-6 8.48GB/s ± 1% 9.98GB/s ± 5% +17.67% (p=0.000 n=20+18) CompareStringBig-6 9.37GB/s ± 1% 10.17GB/s ± 0% +8.54% (p=0.000 n=20+17) Change-Id: I1c949626dd2aaf9f633e3c888a9df71c82eed7e1 Reviewed-on: https://go-review.googlesource.com/16481Reviewed-by:
Keith Randall <khr@golang.org> Run-TryBot: Ilya Tocar <ilya.tocar@intel.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Klaus Post <klauspost@gmail.com>
-
Keith Randall authored
This change removes the retry mechanism we use for buffered channels. Instead, any sender waking up a receiver or vice versa completes the full protocol with its counterpart. This means the counterpart does not need to relock the channel when it wakes up. (Currently buffered channels need to relock on wakeup.) For sends on a channel with waiting receivers, this change replaces two copies (sender->queue, queue->receiver) with one (sender->receiver). For receives on channels with a waiting sender, two copies are still required. This change unifies to a large degree the algorithm for buffered and unbuffered channels, simplifying the overall implementation. Fixes #11506 benchmark old ns/op new ns/op delta BenchmarkChanProdCons10 125 110 -12.00% BenchmarkChanProdCons0 303 284 -6.27% BenchmarkChanProdCons100 75.5 71.3 -5.56% BenchmarkChanContended 6452 6125 -5.07% BenchmarkChanNonblocking 11.5 11.0 -4.35% BenchmarkChanCreation 149 143 -4.03% BenchmarkChanSem 63.6 61.6 -3.14% BenchmarkChanUncontended 6390 6212 -2.79% BenchmarkChanSync 282 276 -2.13% BenchmarkChanProdConsWork10 516 506 -1.94% BenchmarkChanProdConsWork0 696 685 -1.58% BenchmarkChanProdConsWork100 470 469 -0.21% BenchmarkChanPopular 660427 660012 -0.06% Change-Id: I164113a56432fbc7cace0786e49c5a6e6a708ea4 Reviewed-on: https://go-review.googlesource.com/9345 Run-TryBot: Keith Randall <khr@golang.org> Reviewed-by:
Austin Clements <austin@google.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com>
-
Matthew Dempsky authored
Fixes #12002. Change-Id: I7262f4520560ac158fc2ee3ce1d2f7a488d40354 Reviewed-on: https://go-review.googlesource.com/16666 Run-TryBot: Matthew Dempsky <mdempsky@google.com> Reviewed-by:
Minux Ma <minux@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Dave Cheney <dave@cheney.net>
-
Shenghou Ma authored
Fixes #12139. Change-Id: Ied760ac37e2fc21ef951ae872136dc3bfd49bf9f Reviewed-on: https://go-review.googlesource.com/16671Reviewed-by:
Ian Lance Taylor <iant@golang.org>
-
Ian Lance Taylor authored
Fixes #13124. Change-Id: I8a824156c84016504d29dc2dd2d522149b189be8 Reviewed-on: https://go-review.googlesource.com/16537Reviewed-by:
Russ Cox <rsc@golang.org>
-
Matthew Dempsky authored
While here, enable getrandom on arm64 too (using the value found in include/uapi/asm-generic/unistd.h, which seems to match up with other GOARCH=arm64 syscall numbers). Updates #10848. Change-Id: I5ab36ccf6ee8d5cc6f0e1a61d09f0da7410288b9 Reviewed-on: https://go-review.googlesource.com/16662 Run-TryBot: Matthew Dempsky <mdempsky@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
- 04 Nov, 2015 11 commits
-
-
Austin Clements authored
Currently we depend on the good graces and timing of the scheduler to get opportunities to start dedicated mark workers. In the worst case, it may take 10ms to get dedicated mark workers going at the beginning of mark 1 and mark 2 or after the amount of available work has dropped and gone back up. Instead of waiting for the regular preemption logic to get around to us, make putfull enlist a random P if we're not already running enough dedicated workers. This should improve performance stability of the garbage collector and is likely to improve the overall performance somewhat. No overall effect on the go1 benchmarks. It speeds up the garbage benchmark by 12%, which more than counters the performance loss from the previous commit. name old time/op new time/op delta XBenchGarbage-12 6.32ms ± 4% 5.58ms ± 2% -11.68% (p=0.000 n=20+16) name old time/op new time/op delta BinaryTree17-12 3.18s ± 5% 3.12s ± 4% -1.83% (p=0.021 n=20+20) Fannkuch11-12 2.50s ± 2% 2.46s ± 2% -1.57% (p=0.000 n=18+19) FmtFprintfEmpty-12 50.8ns ± 3% 50.4ns ± 3% ~ (p=0.184 n=20+20) FmtFprintfString-12 167ns ± 2% 171ns ± 1% +2.46% (p=0.000 n=20+19) FmtFprintfInt-12 161ns ± 2% 163ns ± 2% +1.81% (p=0.000 n=20+20) FmtFprintfIntInt-12 269ns ± 1% 266ns ± 1% -0.81% (p=0.002 n=19+20) FmtFprintfPrefixedInt-12 237ns ± 2% 231ns ± 2% -2.86% (p=0.000 n=20+20) FmtFprintfFloat-12 313ns ± 2% 313ns ± 1% ~ (p=0.681 n=20+20) FmtManyArgs-12 1.05µs ± 2% 1.03µs ± 1% -2.26% (p=0.000 n=20+20) GobDecode-12 8.66ms ± 1% 8.67ms ± 1% ~ (p=0.380 n=19+20) GobEncode-12 6.56ms ± 1% 6.56ms ± 2% ~ (p=0.607 n=19+20) Gzip-12 317ms ± 1% 314ms ± 2% -1.10% (p=0.000 n=20+19) Gunzip-12 42.1ms ± 1% 42.2ms ± 1% +0.27% (p=0.044 n=20+19) HTTPClientServer-12 62.7µs ± 1% 62.0µs ± 1% -1.04% (p=0.000 n=19+18) JSONEncode-12 16.7ms ± 1% 16.8ms ± 2% +0.59% (p=0.021 n=20+20) JSONDecode-12 58.2ms ± 1% 61.4ms ± 2% +5.43% (p=0.000 n=18+19) Mandelbrot200-12 3.84ms ± 1% 3.87ms ± 2% +0.79% (p=0.008 n=18+20) GoParse-12 3.86ms ± 2% 3.76ms ± 2% -2.60% (p=0.000 n=20+20) RegexpMatchEasy0_32-12 100ns ± 2% 100ns ± 1% -0.68% (p=0.005 n=18+15) RegexpMatchEasy0_1K-12 332ns ± 1% 342ns ± 1% +3.16% (p=0.000 n=19+19) RegexpMatchEasy1_32-12 82.9ns ± 3% 83.0ns ± 2% ~ (p=0.906 n=19+20) RegexpMatchEasy1_1K-12 487ns ± 1% 494ns ± 1% +1.50% (p=0.000 n=17+20) RegexpMatchMedium_32-12 131ns ± 2% 130ns ± 1% ~ (p=0.686 n=19+20) RegexpMatchMedium_1K-12 39.6µs ± 1% 39.2µs ± 1% -1.09% (p=0.000 n=18+19) RegexpMatchHard_32-12 2.04µs ± 1% 2.04µs ± 2% ~ (p=0.804 n=20+20) RegexpMatchHard_1K-12 61.7µs ± 2% 61.3µs ± 2% ~ (p=0.052 n=18+20) Revcomp-12 529ms ± 2% 533ms ± 1% +0.83% (p=0.003 n=20+19) Template-12 70.7ms ± 2% 71.0ms ± 2% ~ (p=0.065 n=20+19) TimeParse-12 351ns ± 2% 355ns ± 1% +1.25% (p=0.000 n=19+20) TimeFormat-12 362ns ± 2% 373ns ± 1% +2.83% (p=0.000 n=18+20) [Geo mean] 62.2µs 62.3µs +0.13% name old speed new speed delta GobDecode-12 88.6MB/s ± 1% 88.5MB/s ± 1% ~ (p=0.392 n=19+20) GobEncode-12 117MB/s ± 1% 117MB/s ± 1% ~ (p=0.622 n=19+20) Gzip-12 61.1MB/s ± 1% 61.8MB/s ± 2% +1.11% (p=0.000 n=20+19) Gunzip-12 461MB/s ± 1% 460MB/s ± 1% -0.27% (p=0.044 n=20+19) JSONEncode-12 116MB/s ± 1% 115MB/s ± 2% -0.58% (p=0.022 n=20+20) JSONDecode-12 33.3MB/s ± 1% 31.6MB/s ± 2% -5.15% (p=0.000 n=18+19) GoParse-12 15.0MB/s ± 2% 15.4MB/s ± 2% +2.66% (p=0.000 n=20+20) RegexpMatchEasy0_32-12 317MB/s ± 2% 319MB/s ± 2% ~ (p=0.052 n=20+20) RegexpMatchEasy0_1K-12 3.08GB/s ± 1% 2.99GB/s ± 1% -3.07% (p=0.000 n=19+19) RegexpMatchEasy1_32-12 386MB/s ± 3% 386MB/s ± 2% ~ (p=0.939 n=19+20) RegexpMatchEasy1_1K-12 2.10GB/s ± 1% 2.07GB/s ± 1% -1.46% (p=0.000 n=17+20) RegexpMatchMedium_32-12 7.62MB/s ± 2% 7.64MB/s ± 1% ~ (p=0.702 n=19+20) RegexpMatchMedium_1K-12 25.9MB/s ± 1% 26.1MB/s ± 2% +0.99% (p=0.000 n=18+20) RegexpMatchHard_32-12 15.7MB/s ± 1% 15.7MB/s ± 2% ~ (p=0.723 n=20+20) RegexpMatchHard_1K-12 16.6MB/s ± 2% 16.7MB/s ± 2% ~ (p=0.052 n=18+20) Revcomp-12 481MB/s ± 2% 477MB/s ± 1% -0.83% (p=0.003 n=20+19) Template-12 27.5MB/s ± 2% 27.3MB/s ± 2% ~ (p=0.062 n=20+19) [Geo mean] 99.4MB/s 99.1MB/s -0.35% Change-Id: I914d8cadded5a230509d118164a4c201601afc06 Reviewed-on: https://go-review.googlesource.com/16298Reviewed-by:
Rick Hudson <rlh@golang.org>
-
Austin Clements authored
Currently dedicated mark workers participate in the getfull barrier during concurrent mark. However, the getfull barrier wasn't designed for concurrent work and this causes no end of headaches. In the concurrent setting, participants come and go. This makes mark completion susceptible to live-lock: since dedicated workers are only periodically polling for completion, it's possible for the program to be in some transient worker each time one of the dedicated workers wakes up to check if it can exit the getfull barrier. It also complicates reasoning about the system because dedicated workers participate directly in the getfull barrier, but transient workers must instead use trygetfull because they have exit conditions that aren't captured by getfull (e.g., fractional workers exit when preempted). The complexity of implementing these exit conditions contributed to #11677. Furthermore, the getfull barrier is inefficient because we could be running user code instead of spinning on a P. In effect, we're dedicating 25% of the CPU to marking even if that means we have to spin to make that 25%. It also causes issues on Windows because we can't actually sleep for 100µs (#8687). Fix this by making dedicated workers no longer participate in the getfull barrier. Instead, dedicated workers simply return to the scheduler when they fail to get more work, regardless of what others workers are doing, and the scheduler only starts new dedicated workers if there's work available. Everything that needs to be handled by this barrier is already handled by detection of mark completion. This makes the system much more symmetric because all workers and assists now use trygetfull during concurrent mark. It also loosens the 25% CPU target so that we can give some of that 25% back to user code if there isn't enough work to keep the mark worker busy. And it eliminates the problematic 100µs sleep on Windows during concurrent mark (though not during mark termination). The downside of this is that if we hit a bottleneck in the heap graph that then expands back out, the system may shut down dedicated workers and take a while to start them back up. We'll address this in the next commit. Updates #12041 and #8687. No effect on the go1 benchmarks. This slows down the garbage benchmark by 9%, but we'll more than make it up in the next commit. name old time/op new time/op delta XBenchGarbage-12 5.80ms ± 2% 6.32ms ± 4% +9.03% (p=0.000 n=20+20) Change-Id: I65100a9ba005a8b5cf97940798918672ea9dd09b Reviewed-on: https://go-review.googlesource.com/16297Reviewed-by:
-
David Crawshaw authored
The existing go_darwin_arm_exec.go script does not work with Xcode 7, not due to any significant changes, but just ordering and timing of statements from lldb. Unfortunately the current design of go_darwin_arm_exec.go makes it not obvious what gets stuck where, so this moves from a moving buffer window to a complete buffer of the lldb output. The result is easier code to follow, and it works with Xcode 7. Updates #12660. Change-Id: I3b8b890b0bf4474119482e95d84e821a86d1eaed Reviewed-on: https://go-review.googlesource.com/16634Reviewed-by:
Michael Matloob <matloob@golang.org>
-
Brad Fitzpatrick authored
Change-Id: Icf9b6802945051aa484fb9ebcce71704f5655474 Reviewed-on: https://go-review.googlesource.com/16630Reviewed-by:
Andrew Gerrand <adg@golang.org> Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Brad Fitzpatrick authored
Noticed from nacl trybot failures on new tests in https://golang.org/cl/16630 Related earlier fix of mine to nacl's listen code: syscall: fix nacl listener to not accept connections once closed https://go-review.googlesource.com/15940 Perhaps a better fix (in the future?) would be to remove the listener from the map at close, but that didn't seem entirely straightforward last time I looked into it. It's not my code, but it seems that the map entry continues to have a purpose even after Listener close. (?) But given that this code is only really used for running tests and the playground, this seems fine. Change-Id: I43bfedc57c07f215f4d79c18f588d3650687a48f Reviewed-on: https://go-review.googlesource.com/16650 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> Reviewed-by:
-
David Crawshaw authored
Fix for iOS builder. Change-Id: I5b6c977b187446c848182a9294d5bed6b5f9f6e4 Reviewed-on: https://go-review.googlesource.com/16633 Run-TryBot: David Crawshaw <crawshaw@golang.org> Reviewed-by:
Hyang-Ah Hana Kim <hyangah@gmail.com>
-
unknown authored
Unification of implementation of existing md5.Write function with other implementations (sha1, sha256, sha512). Change-Id: I58ae02d165b17fc221953a5b4b986048b46c0508 Reviewed-on: https://go-review.googlesource.com/16621Reviewed-by:
-
Mohit Agarwal authored
builder.copyFile ensures that the destination is an object file. This wouldn't be true if we are not writing to a regular file and the copy fails. Check if the destination is an object file only if we are writing to a regular file. While removing the file, ensure that it is a regular file so that device files and such aren't removed when running as a user with suggicient privileges. Fixes #12407 Change-Id: Ie86ce9770fa59aa56fc486a5962287859b69db3d Reviewed-on: https://go-review.googlesource.com/16585Reviewed-by:
-
Austin Clements authored
This introduces a recursive variant of the go:nowritebarrier annotation that prohibits write barriers not only in the annotated function, but in all functions it calls, recursively. The error message gives the shortest call stack from the annotated function to the function containing the prohibited write barrier, including the names of the functions and the line numbers of the calls. To demonstrate the annotation, we apply it to gcmarkwb_m, the write barrier itself. This is a new annotation rather than a modification of the existing go:nowritebarrier annotation because, for better or worse, there are many go:nowritebarrier functions that do call functions with write barriers. In most of these cases this is benign because the annotation was conservative, but it prohibits simply coopting the existing annotation. Change-Id: I225ca483c8f699e8436373ed96349e80ca2c2479 Reviewed-on: https://go-review.googlesource.com/16554Reviewed-by:
-
Ian Lance Taylor authored
The code works without the newline, but it looks funny: func _cgoexp_15afe6549f62_GoFn(a unsafe.Pointer, n int32) { fn := GoFn This adds a newline after the '{'. Change-Id: I6c465abe16f47924426d1b22b91004b3a3586ebd Reviewed-on: https://go-review.googlesource.com/16612 Run-TryBot: Ian Lance Taylor <iant@golang.org> Reviewed-by: -
Brad Fitzpatrick authored
The Server's server goroutine was panicing (but recovering) when cleaning up after handling a request. It was pretty harmless (it just closed that one connection and didn't kill the whole process) but it was distracting. Updates #13135 Change-Id: I2a0ce9e8b52c8d364e3f4ce245e05c6f8d62df14 Reviewed-on: https://go-review.googlesource.com/16572 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
- 03 Nov, 2015 12 commits
-
-
Ian Lance Taylor authored
The width of the type of an external variable defined with a type literal may not be set when the instrumentation pass is run. There are two cases in the standard library that fail without the call to dowidth: ../../../src/encoding/base32/base32.go:322: constant -1000000000 overflows uintptr ../../../src/encoding/base32/base32.go:329: constant -1000000000 overflows uintptr ../../../src/encoding/json/encode.go:385: constant -1000000000 overflows uintptr ../../../src/encoding/json/encode.go:387: constant -1000000000 overflows uintptr Change-Id: I7c3334f7decdb7488595ffe4090cd262d7334283 Reviewed-on: https://go-review.googlesource.com/16331 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Ian Lance Taylor authored
On older versions of GCC we need to pass a file name before GCC will report an unrecognized option. Fixes #13065. Change-Id: I7ed34c01a006966a446059025f7d10235c649072 Reviewed-on: https://go-review.googlesource.com/16589 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Dmitry Vyukov authored
runtime.free has long gone. Change-Id: I058f69e6481b8fa008e1951c29724731a8a3d081 Reviewed-on: https://go-review.googlesource.com/16593Reviewed-by:
-
Austin Clements authored
Currently the gcWork abstraction caches a single work buffer. As a result, if a worker is putting and getting pointers right at the boundary of a work buffer, it can flap between work buffers and (potentially significantly) increase contention on the global work buffer lists. This change modifies gcWork to instead cache two work buffers and switch off between them. This introduces one buffers' worth of hysteresis and eliminates the above performance worst case by amortizing the cost of getting or putting a work buffer over at least one buffers' worth of work. In practice, it's difficult to trigger this worst case with reasonably large work buffers. On the garbage benchmark, this reduces the max writes/sec to the global work list from 32K to 25K and the median from 6K to 5K. However, if a workload were to trigger this worst case behavior, it could significantly drive up this contention. This has negligible effects on the go1 benchmarks and slightly speeds up the garbage benchmark. name old time/op new time/op delta XBenchGarbage-12 5.90ms ± 3% 5.83ms ± 4% -1.18% (p=0.011 n=18+18) name old time/op new time/op delta BinaryTree17-12 3.22s ± 4% 3.17s ± 3% -1.57% (p=0.009 n=19+20) Fannkuch11-12 2.44s ± 1% 2.53s ± 4% +3.78% (p=0.000 n=18+19) FmtFprintfEmpty-12 50.2ns ± 2% 50.5ns ± 5% ~ (p=0.631 n=19+20) FmtFprintfString-12 167ns ± 1% 166ns ± 1% ~ (p=0.141 n=20+20) FmtFprintfInt-12 162ns ± 1% 159ns ± 1% -1.80% (p=0.000 n=20+20) FmtFprintfIntInt-12 277ns ± 2% 263ns ± 1% -4.78% (p=0.000 n=20+18) FmtFprintfPrefixedInt-12 240ns ± 1% 232ns ± 2% -3.25% (p=0.000 n=20+20) FmtFprintfFloat-12 311ns ± 1% 315ns ± 2% +1.17% (p=0.000 n=20+20) FmtManyArgs-12 1.05µs ± 2% 1.03µs ± 2% -1.72% (p=0.000 n=20+20) GobDecode-12 8.65ms ± 1% 8.71ms ± 2% +0.68% (p=0.001 n=19+20) GobEncode-12 6.51ms ± 1% 6.54ms ± 1% +0.42% (p=0.047 n=20+19) Gzip-12 318ms ± 2% 315ms ± 2% -1.20% (p=0.000 n=19+19) Gunzip-12 42.2ms ± 2% 42.1ms ± 1% ~ (p=0.667 n=20+19) HTTPClientServer-12 62.5µs ± 1% 62.4µs ± 1% ~ (p=0.110 n=20+18) JSONEncode-12 16.8ms ± 1% 16.8ms ± 2% ~ (p=0.569 n=19+20) JSONDecode-12 60.8ms ± 2% 59.8ms ± 1% -1.69% (p=0.000 n=19+19) Mandelbrot200-12 3.87ms ± 1% 3.85ms ± 0% -0.61% (p=0.001 n=20+17) GoParse-12 3.76ms ± 2% 3.76ms ± 1% ~ (p=0.698 n=20+20) RegexpMatchEasy0_32-12 100ns ± 2% 101ns ± 2% ~ (p=0.065 n=19+20) RegexpMatchEasy0_1K-12 342ns ± 2% 333ns ± 1% -2.82% (p=0.000 n=20+19) RegexpMatchEasy1_32-12 83.3ns ± 2% 83.2ns ± 2% ~ (p=0.692 n=20+19) RegexpMatchEasy1_1K-12 498ns ± 2% 490ns ± 1% -1.52% (p=0.000 n=18+20) RegexpMatchMedium_32-12 131ns ± 2% 131ns ± 2% ~ (p=0.464 n=20+18) RegexpMatchMedium_1K-12 39.3µs ± 2% 39.6µs ± 1% +0.77% (p=0.000 n=18+19) RegexpMatchHard_32-12 2.04µs ± 2% 2.06µs ± 1% +0.69% (p=0.009 n=19+20) RegexpMatchHard_1K-12 61.4µs ± 2% 62.1µs ± 1% +1.21% (p=0.000 n=19+20) Revcomp-12 534ms ± 1% 529ms ± 1% -0.97% (p=0.000 n=19+16) Template-12 70.4ms ± 2% 70.0ms ± 1% ~ (p=0.070 n=19+19) TimeParse-12 359ns ± 3% 344ns ± 1% -4.15% (p=0.000 n=19+19) TimeFormat-12 357ns ± 1% 361ns ± 2% +1.05% (p=0.002 n=20+20) [Geo mean] 62.4µs 62.0µs -0.56% name old speed new speed delta GobDecode-12 88.7MB/s ± 1% 88.1MB/s ± 2% -0.68% (p=0.001 n=19+20) GobEncode-12 118MB/s ± 1% 117MB/s ± 1% -0.42% (p=0.046 n=20+19) Gzip-12 60.9MB/s ± 2% 61.7MB/s ± 2% +1.21% (p=0.000 n=19+19) Gunzip-12 460MB/s ± 2% 461MB/s ± 1% ~ (p=0.661 n=20+19) JSONEncode-12 116MB/s ± 1% 115MB/s ± 2% ~ (p=0.555 n=19+20) JSONDecode-12 31.9MB/s ± 2% 32.5MB/s ± 1% +1.72% (p=0.000 n=19+19) GoParse-12 15.4MB/s ± 2% 15.4MB/s ± 1% ~ (p=0.653 n=20+20) RegexpMatchEasy0_32-12 317MB/s ± 2% 315MB/s ± 2% ~ (p=0.141 n=19+20) RegexpMatchEasy0_1K-12 2.99GB/s ± 2% 3.07GB/s ± 1% +2.86% (p=0.000 n=20+19) RegexpMatchEasy1_32-12 384MB/s ± 2% 385MB/s ± 2% ~ (p=0.672 n=20+19) RegexpMatchEasy1_1K-12 2.06GB/s ± 2% 2.09GB/s ± 1% +1.54% (p=0.000 n=18+20) RegexpMatchMedium_32-12 7.62MB/s ± 2% 7.63MB/s ± 2% ~ (p=0.800 n=20+18) RegexpMatchMedium_1K-12 26.0MB/s ± 1% 25.8MB/s ± 1% -0.77% (p=0.000 n=18+19) RegexpMatchHard_32-12 15.7MB/s ± 2% 15.6MB/s ± 1% -0.69% (p=0.010 n=19+20) RegexpMatchHard_1K-12 16.7MB/s ± 2% 16.5MB/s ± 1% -1.19% (p=0.000 n=19+20) Revcomp-12 476MB/s ± 1% 481MB/s ± 1% +0.97% (p=0.000 n=19+16) Template-12 27.6MB/s ± 2% 27.7MB/s ± 1% ~ (p=0.071 n=19+19) [Geo mean] 99.1MB/s 99.3MB/s +0.27% Change-Id: I68bcbf74ccb716cd5e844a554f67b679135105e6 Reviewed-on: https://go-review.googlesource.com/16042Reviewed-by:
-
Dmitry Vyukov authored
Handling of special records for tiny allocations has two problems: 1. Once we queue a finalizer we mark the object. As the result any subsequent finalizers for the same object will not be queued during this GC cycle. If we have 16 finalizers setup (the worst case), finalization will take 16 GC cycles. This is what caused misbehave of tinyfin.go. The actual flakiness was caused by the fact that fing is asynchronous and don't always run before the check. 2. If a tiny block has both finalizer and profile specials, it is possible that we both queue finalizer, preserve the object live and free the profile record. As the result heap profile can be skewed. Fix both issues by analyzing all special records for a single object at once. Also, make tinyfin test stricter and remove reliance on real time. Also, add a test for the problem 2. Currently heap profile missed about a half of live memory. Fixes #13100 Change-Id: I9ae4dc1c44893724138a4565ca5cae29f2e97544 Reviewed-on: https://go-review.googlesource.com/16591Reviewed-by:
-
Ilya Tocar authored
Currently we have special case for 1-byte strings, This extends this to strings shorter than 32 bytes on amd64. Results (broadwell): name old time/op new time/op delta IndexRune-4 57.4ns ± 0% 57.5ns ± 0% +0.10% (p=0.000 n=20+19) IndexRuneFastPath-4 20.4ns ± 0% 20.4ns ± 0% ~ (all samples are equal) Index-4 21.0ns ± 0% 21.8ns ± 0% +3.81% (p=0.000 n=20+20) LastIndex-4 7.07ns ± 1% 6.98ns ± 0% -1.21% (p=0.000 n=20+16) IndexByte-4 18.3ns ± 0% 18.3ns ± 0% ~ (all samples are equal) IndexHard1-4 1.46ms ± 0% 0.39ms ± 0% -73.06% (p=0.000 n=16+16) IndexHard2-4 1.46ms ± 0% 0.30ms ± 0% -79.55% (p=0.000 n=18+18) IndexHard3-4 1.46ms ± 0% 0.66ms ± 0% -54.68% (p=0.000 n=19+19) LastIndexHard1-4 1.46ms ± 0% 1.46ms ± 0% -0.01% (p=0.036 n=18+20) LastIndexHard2-4 1.46ms ± 0% 1.46ms ± 0% ~ (p=0.588 n=19+19) LastIndexHard3-4 1.46ms ± 0% 1.46ms ± 0% ~ (p=0.283 n=17+20) IndexTorture-4 11.1µs ± 0% 11.1µs ± 0% +0.01% (p=0.000 n=18+17) Change-Id: I892781549f558f698be4e41f9f568e3d0611efb5 Reviewed-on: https://go-review.googlesource.com/16430Reviewed-by:
-
Austin Clements authored
Currently the GC work buffers are only 256 bytes and hence can record only 24 64-bit pointer. They were reduced from 4K in commits db7fd1c1 and a15818fe as a way to minimize the amount of work the per-P workbuf caches could "hide" from the mark phase and carry in to the mark termination phase. However, this approach wasn't very robust and we later added a "mark 2" phase to address this problem head-on. Because of mark 2, there's now no benefit to having very small work buffers. But there are plenty of downsides: small work buffers increase contention on the work lists, increase the frequency and hence net overhead of acquiring and releasing work buffers, and somewhat increase memory overhead of the GC. This commit expands work buffers back to 4K (504 64-bit pointers). This reduces the rate of writes to work.full in the garbage benchmark from a peak of ~780,000 writes/sec to a peak of ~32,000 writes/sec. This has negligible effect on the go1 benchmarks. It slightly slows down the garbage benchmark. name old time/op new time/op delta XBenchGarbage-12 5.37ms ± 5% 5.60ms ± 2% +4.37% (p=0.000 n=20+20) Change-Id: Ic9cc28e7a125d23d9faf4f5e690fb8aa9bcdfb28 Reviewed-on: https://go-review.googlesource.com/15893Reviewed-by:
-
Austin Clements authored
Currently, assists are non-preemptible, which means a heavily assisting G can block other Gs from running. At the beginning of a GC cycle, it can also delay scang, which will spin until the assist is done. Since scanning is currently done sequentially, this can seriously extend the length of the scan phase. Fix this by making assists preemptible. Since the assist holds work buffers and runs on the system stack, this must be done cooperatively: we make gcDrainN return on preemption, and make the assist return from the system stack and voluntarily Gosched. This is prerequisite to enlarging the work buffers. Without this change, the delays and spinning in scang increase significantly. This has no effect on the go1 benchmarks. name old time/op new time/op delta XBenchGarbage-12 5.72ms ± 4% 5.37ms ± 5% -6.11% (p=0.000 n=20+20) Change-Id: I829e732a0f23b126da633516a1a9ec1a508fdbf1 Reviewed-on: https://go-review.googlesource.com/15894Reviewed-by:
-
Austin Clements authored
GC assists must block until the assist can be satisfied (either through stealing credit or doing work) or the GC cycle ends. Currently, this is implemented as a retry loop with a 100 µs delay. This obviously isn't ideal, as it wastes CPU and delays mutator execution. It also has the somewhat peculiar downside that sleeping a G requires allocation, and this requires working around recursive allocation. Replace this timed delay with a proper scheduling queue. When an assist can't be satisfied immediately, it adds the allocating G to a queue and parks it. Any time background scan credit is flushed, it consults this queue, directly satisfies the debt of queued assists, and wakes up satisfied assists before flushing any remaining credit to the background credit pool. No effect on the go1 benchmarks. Slightly speeds up the garbage benchmark. name old time/op new time/op delta XBenchGarbage-12 5.81ms ± 1% 5.72ms ± 4% -1.65% (p=0.011 n=20+20) Updates #12041. Change-Id: I8ee3b6274dd097b12b10a8030796a958a4b0e7b7 Reviewed-on: https://go-review.googlesource.com/15890Reviewed-by:
-
Austin Clements authored
This eliminates many write barriers in the scheduler code that are unnecessary and will interfere with upcoming changes where the garbage collector will have to invoke run queue functions in contexts that must not have write barriers. Change-Id: I702d0ac99cfd00ffff406e7362917db6a43e7e55 Reviewed-on: https://go-review.googlesource.com/16556Reviewed-by:
-
Michael Matloob authored
The error message should indicate the name of the unset variable, rather than the value. The value will alwayse be empty. Change-Id: I6f6c165074dfce857b6523703a890d205423cd28 Reviewed-on: https://go-review.googlesource.com/16555Reviewed-by:
-
Todd Neal authored
Replace various implementations of inlining prevention with "go:noinline" Change-Id: Iac90895c3a62d6f4b7a6c72e11e165d15a0abfa4 Reviewed-on: https://go-review.googlesource.com/16510Reviewed-by:
-
- 02 Nov, 2015 4 commits
-
-
Michael Hudson-Doyle authored
golang.org/cl/16436 added a local symbol for every global function, but also added a duplicate entry for the global symbol. Surprisingly this hasn't caused any noticeable problems, but it's still wrong. Change-Id: Icd3906760f8aaf7bef31ffd4f2d866d73d36dc2c Reviewed-on: https://go-review.googlesource.com/16581Reviewed-by:
-
Ilya Tocar authored
Use AVX2 if available. Results (haswell), below: name old time/op new time/op delta BytesCompare1-6 11.4ns ± 0% 11.4ns ± 0% ~ (all samples are equal) BytesCompare2-6 11.4ns ± 0% 11.4ns ± 0% ~ (all samples are equal) BytesCompare4-6 11.4ns ± 0% 11.4ns ± 0% ~ (all samples are equal) BytesCompare8-6 9.29ns ± 2% 8.76ns ± 0% -5.72% (p=0.000 n=16+17) BytesCompare16-6 9.29ns ± 2% 9.20ns ± 0% -1.02% (p=0.000 n=20+16) BytesCompare32-6 11.4ns ± 1% 11.4ns ± 0% ~ (p=0.191 n=20+20) BytesCompare64-6 14.4ns ± 0% 13.1ns ± 0% -8.68% (p=0.000 n=20+20) BytesCompare128-6 20.2ns ± 0% 18.5ns ± 0% -8.27% (p=0.000 n=16+20) BytesCompare256-6 29.3ns ± 0% 24.5ns ± 0% -16.38% (p=0.000 n=16+16) BytesCompare512-6 46.8ns ± 0% 37.1ns ± 0% -20.78% (p=0.000 n=18+16) BytesCompare1024-6 82.9ns ± 0% 62.3ns ± 0% -24.86% (p=0.000 n=20+14) BytesCompare2048-6 155ns ± 0% 112ns ± 0% -27.74% (p=0.000 n=20+20) CompareBytesEqual-6 10.1ns ± 1% 10.0ns ± 1% ~ (p=0.527 n=20+20) CompareBytesToNil-6 10.0ns ± 2% 9.4ns ± 0% -6.57% (p=0.000 n=20+17) CompareBytesEmpty-6 8.76ns ± 0% 8.76ns ± 0% ~ (all samples are equal) CompareBytesIdentical-6 8.76ns ± 0% 8.76ns ± 0% ~ (all samples are equal) CompareBytesSameLength-6 10.6ns ± 1% 10.6ns ± 1% ~ (p=0.240 n=20+20) CompareBytesDifferentLength-6 10.6ns ± 0% 10.6ns ± 1% ~ (p=1.000 n=20+20) CompareBytesBigUnaligned-6 132±s ± 1% 105±s ± 1% -20.61% (p=0.000 n=20+18) CompareBytesBig-6 125±s ± 1% 105±s ± 1% -16.31% (p=0.000 n=20+20) CompareBytesBigIdentical-6 8.13ns ± 0% 8.13ns ± 0% ~ (all samples are equal) name old speed new speed delta CompareBytesBigUnaligned-6 7.94GB/s ± 1% 10.01GB/s ± 1% +25.96% (p=0.000 n=20+18) CompareBytesBig-6 8.38GB/s ± 1% 10.01GB/s ± 1% +19.48% (p=0.000 n=20+20) CompareBytesBigIdentical-6 129TB/s ± 0% 129TB/s ± 0% +0.01% (p=0.003 n=17+19) Change-Id: I820f31bab4582dd4204b146bb077c0d2f24cd8f5 Reviewed-on: https://go-review.googlesource.com/16434 Run-TryBot: Ilya Tocar <ilya.tocar@intel.com> Reviewed-by:
-
David Crawshaw authored
Change-Id: I630ae29ecb39252642883398cc51d49133c6f3d7 Reviewed-on: https://go-review.googlesource.com/16451Reviewed-by:
-
Brad Fitzpatrick authored
* use new(int32) to be pedantic about documented SetFinalizer rules: "The argument x must be a pointer to an object allocated by calling new or by taking the address of a composite literal" * remove the amd64-only restriction. The GC is fully precise everywhere now, even on 32-bit. (keep the gccgo restriction, though) * remove a data race (perhaps the actual bug) and use atomic.LoadInt32 for the final check. The race detector is now happy, too. Updates #13100 Change-Id: I8d05c0ac4f046af9ba05701ad709c57984b34893 Reviewed-on: https://go-review.googlesource.com/16535 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> Reviewed-by:
-
- 01 Nov, 2015 4 commits
-
-
Ian Lance Taylor authored
Change-Id: I288bd3091ea81db7b616747cbec8958a31d98b7e Reviewed-on: https://go-review.googlesource.com/16532Reviewed-by:
Brad Fitzpatrick <bradfitz@golang.org>
-
Michael Hudson-Doyle authored
To avoid collisions with what existing code may already be doing. Change-Id: Ice639440aafc0724714c25333d90a49954372230 Reviewed-on: https://go-review.googlesource.com/16503Reviewed-by:
-
Mikio Hara authored
This change makes Dial, Listen and ListenPacket with invalid port fail whatever GODEBUG=netdns is. Please be informed that cgoLookupPort with an out of range literal number may return either the lower or upper bound value, 0 or 65535, with no error on some platform. Fixes #11715. Change-Id: I43f9c4fb5526d1bf50b97698e0eb39d29fd74c35 Reviewed-on: https://go-review.googlesource.com/12447Reviewed-by:
-
Alex Brainman authored
Also new tests added. So, perhaps, this CL corrects even more broken EvalSymlinks behaviour. Fixes #12451 Change-Id: I81b9d92bab74bcb8eca6db6633546982fe5cec87 Reviewed-on: https://go-review.googlesource.com/16192Reviewed-by:
-
- 31 Oct, 2015 1 commit
-
-
Ian Lance Taylor authored
The GNU binutils recently picked up support for new 386/amd64 relocations. Add support for them in the Go linker when doing an internal link. The 386 relocation R_386_GOT32X was proposed in https://groups.google.com/forum/#!topic/ia32-abi/GbJJskkid4I . It can be treated as identical to the R_386_GOT32 relocation. The amd64 relocations R_X86_64_GOTPCRELX and R_X86_64_REX_GOTPCRELX were proposed in https://groups.google.com/forum/#!topic/x86-64-abi/n9AWHogmVY0 . They can both be treated as identical to the R_X86_64_GOTPCREL relocation. The purpose of the new relocations is to permit additional linker relaxations in some cases. We do not attempt to support those cases. While we're at it, remove the unused and in some cases out of date _COUNT names from ld/elf.go. Fixes #13114. Change-Id: I34ef07f6fcd00cdd2996038ecf46bb77a49e968b Reviewed-on: https://go-review.googlesource.com/16529Reviewed-by:
-
- 30 Oct, 2015 1 commit
-
-
Matthew Dempsky authored
The code is meant to return "<nil>", but because of a make([]Type, 8) call that should be make([]Type, 0, 8), the nil Type happens to already appear in the array. Change-Id: I2db140046e52f27db1b0ac84bde2b6680677dd95 Reviewed-on: https://go-review.googlesource.com/16464 Run-TryBot: Matthew Dempsky <mdempsky@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Robert Griesemer <gri@golang.org>
-
