This allows us to make two changes:

1. Force the argument type to be size_t, even on broken
   systems that declare malloc to take a ulong.

2. Call runtime.throw if malloc fails.
   (That is, the program crashes; it does not panic.)

Fixes #3403.
Fixes #5926.

R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/13413047

This CL adds minimal support of Happy Eyeballs-like TCP connection
setup to Dialer API. Happy Eyeballs and derivation techniques are
described in the following:

- Happy Eyeballs: Success with Dual-Stack Hosts
  http://tools.ietf.org/html/rfc6555

- Analysing Dual Stack Behaviour and IPv6 Quality
  http://www.potaroo.net/presentations/2012-04-17-dual-stack-quality.pdf

Usually, the techniques consist of three components below.

- DNS query racers, that run A and AAAA queries in parallel or series
- A short list of destination addresses
- TCP SYN racers, that run IPv4 and IPv6 transport in parallel or series

This CL implements only the latter two. The existing DNS query
component gathers together A and AAAA records in series, so we don't
touch it here. This CL just uses extended resolveInternetAddr and makes
it possible to run multiple Dial racers in parallel.

For example, when the given destination is a DNS name and the name has
multiple address family A and AAAA records, and it happens on the TCP
wildcard network "tcp" with DualStack=true like the following:

(&net.Dialer{DualStack: true}).Dial("tcp", "www.example.com:80")

The function will return a first established connection either TCP over
IPv4 or TCP over IPv6, and close the other connection internally.

Fixes #3610.
Fixes #5267.

Benchmark results on freebsd/amd64 virtual machine, tip vs. tip+12416043:

benchmark                           old ns/op    new ns/op    delta
BenchmarkTCP4OneShot                    50696        52141   +2.85%
BenchmarkTCP4OneShotTimeout             65775        66426   +0.99%
BenchmarkTCP4Persistent                 10986        10457   -4.82%
BenchmarkTCP4PersistentTimeout          11207        10445   -6.80%
BenchmarkTCP6OneShot                    62009        63718   +2.76%
BenchmarkTCP6OneShotTimeout             78351        79138   +1.00%
BenchmarkTCP6Persistent                 14695        14659   -0.24%
BenchmarkTCP6PersistentTimeout          15032        14646   -2.57%
BenchmarkTCP4ConcurrentReadWrite         7215         6217  -13.83%
BenchmarkTCP6ConcurrentReadWrite         7528         7493   -0.46%

benchmark                          old allocs   new allocs    delta
BenchmarkTCP4OneShot                       36           36    0.00%
BenchmarkTCP4OneShotTimeout                36           36    0.00%
BenchmarkTCP4Persistent                     0            0     n/a%
BenchmarkTCP4PersistentTimeout              0            0     n/a%
BenchmarkTCP6OneShot                       37           37    0.00%
BenchmarkTCP6OneShotTimeout                37           37    0.00%
BenchmarkTCP6Persistent                     0            0     n/a%
BenchmarkTCP6PersistentTimeout              0            0     n/a%
BenchmarkTCP4ConcurrentReadWrite            0            0     n/a%
BenchmarkTCP6ConcurrentReadWrite            0            0     n/a%

benchmark                           old bytes    new bytes    delta
BenchmarkTCP4OneShot                     2500         2503    0.12%
BenchmarkTCP4OneShotTimeout              2508         2505   -0.12%
BenchmarkTCP4Persistent                     0            0     n/a%
BenchmarkTCP4PersistentTimeout              0            0     n/a%
BenchmarkTCP6OneShot                     2713         2707   -0.22%
BenchmarkTCP6OneShotTimeout              2722         2720   -0.07%
BenchmarkTCP6Persistent                     0            0     n/a%
BenchmarkTCP6PersistentTimeout              0            0     n/a%
BenchmarkTCP4ConcurrentReadWrite            0            0     n/a%
BenchmarkTCP6ConcurrentReadWrite            0            0     n/a%

R=golang-dev, bradfitz, nightlyone, rsc
CC=golang-dev
https://golang.org/cl/12416043

For example, if the pattern is m... there is
no need to look in directories not beginning with m.

Fixes #5214.

R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/13253049

R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/13420048

This is not quite what that issue reports,
because this does not involve a DLL.
But I wanted to make sure this much was working.

Update #4339

R=golang-dev, minux.ma
CC=golang-dev
https://golang.org/cl/13653043

Add coverage for some uncovered bytes methods. The increase in actual coverage is disapointing small.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13651044

Fixes #6353.

R=golang-dev, bradfitz, alex.brainman
CC=golang-dev
https://golang.org/cl/13652043

The scan starts at the directory we care about and works
backward to the GOPATH root. The error should say the
original directory name, not the name of the GOPATH root.

Fixes #6175.

R=golang-dev, minux.ma
CC=golang-dev
https://golang.org/cl/13366050

Fixes #5764.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13441051

The entry for LEAL/LEAQ in these optabs was listed as having
two data bytes in the y array. In fact they had and expect no data
bytes. However, the general loop expects to be able to look at at
least one data byte, to make sure it is not 0x0f. So give them each
a single data byte set to 0 (not 0x0f).

Since the MOV instructions have the largest optab cases, this
requires growing the size of the data array.

Clang found this bug because the general o->op[z] == 0x0f
test was using z == 22, which was out of bounds.

In practice the next byte in memory was probably not 0x0f
so it wasn't truly broken. But might as well be clean.

Update #5764

R=ken2
CC=golang-dev
https://golang.org/cl/13241050

Fixes cpu subtype check when using external linker which sets the CPU_SUBTYPE_LIB64 bit (1<<31).
Fixes #6197.

R=golang-dev, minux.ma, rsc
CC=golang-dev
https://golang.org/cl/13248046

Generated by addca.

R=gobot
CC=golang-dev
https://golang.org/cl/13265044

For example, if an x_test.go file contains a syntax error,
b.test fails with an error message. But it wasn't printing
the same FAIL line that a build failure later would print.
This makes all the test failures that happen (once we
decide to start running tests) consistently say FAIL.

Fixes #4701.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13431044

A package main binary (that is, a command) being installed
does not mean we can skip the build of the package archive
during a test.

Fixes #3417.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13462046

Fixes #5662.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13650043

It was lost when the generic "Notes" support went in.

Had to change the test setup, because it precluded even
being able test multi-line comments, much less multi-paragraph
comments.

Now 'godoc sync/atomic' works correctly again.

Fixes #6135.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13427045

Fixes #6191.
Fixes #5426.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13234052

Fixes #5054.

R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/13609043

Remove test of whether SWIG shared library is older than
sources--should be covered by test of package file anyhow.

Fixes #5739.

R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/13352046

Fixes #5774.

R=golang-dev, adg, r, bradfitz
CC=golang-dev
https://golang.org/cl/9164043

If using other gdb python scripts loaded before Go's gdb-runtime.py
and that have a different init prototype:
Traceback (most recent call last):
  File "/usr/lib/go/src/pkg/runtime/runtime-gdb.py", line 446, in <module>
    k()
TypeError: __init__() takes exactly 3 arguments (1 given)

The problem is that gdb keeps all python scripts in the same namespace,
so vars() contains them. To avoid that, load helpers one by one.

R=iant, rsc
CC=gobot, golang-dev
https://golang.org/cl/9752044

R=golang-dev, bradfitz
CC=ail, golang-dev
https://golang.org/cl/13441050

$INTBITS will not be defined, of course, but that's the best we can do.

Fixes #5978.

R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/13253048

Fixes #5676.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13250047

Fixes #6038.

R=iant
CC=golang-dev
https://golang.org/cl/13649043

Various compilers complain about the macro expansion not
being used. I fixed a few yesterday. More today.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13643044

R=golang-dev, r
CC=golang-dev
https://golang.org/cl/13336046

R=golang-dev, dave
CC=golang-dev
https://golang.org/cl/13396051

R=golang-dev, remyoudompheng, dominik.honnef, adg
CC=golang-dev
https://golang.org/cl/13341049

Fixes #6224

R=golang-dev, hcwfrichter, bradfitz
CC=golang-dev
https://golang.org/cl/13410045

Fixes #4900.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13400044

Before CL 7065067 calling Next on an element returned either the
next/prev element or nil was returned.  After the CL if an element
was not part of a list e.Next() and e.Prev() will panic.  This CL
returns to the documented behavior, that Next/Prev returns the
next/prev list element or nil.

Fixes #6349.

R=golang-dev, gri
CC=golang-dev
https://golang.org/cl/13234051

Bug3486 tried to walk the entire file tree, but other tests might
be creating and removing files in that tree. In particular, package os
creates and removes files in the os directory, and issue 5863
reports failures due to seeing those files appear and then disappear.

Change the test to walk just the test tree, which should not be
changing.

Fixes #5863.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13467045

Fixes #6341.

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13512048

Fixes #5894.

R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/13303051

Fixes #5803.
Is it correct behavior? Who knows.

R=golang-dev, bradfitz, jgc
CC=golang-dev, jgc
https://golang.org/cl/13248048

This will bring in the C++ standard library without requiring
any special #cgo LDFLAGS options.

When using gccgo, just add -lstdc++ to link line; this should
do no harm if it is not needed.

No tests, since we don't want to assume a C++ compiler.

Update #5629

R=golang-dev, minux.ma, rsc
CC=golang-dev
https://golang.org/cl/13394045

If you thought gcc -ansi -pedantic was pedantic, just wait
until you meet clang -fsanitize=undefined.

I think this addresses all the reported "errors", but we'll
need another run to be sure.

all.bash still passes.

Update #5764

Dave, can you please try again?

R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13334049

The code in question is trying to print a nice error message
when a Go EABI binary runs on an OABI machine.
Unfortunately, the only way to do that is to use
ARM Thumb instructions, which we otherwise don't use.

There exist ARM EABI machines that do not support Thumb.
We could run on them if not for this OABI check, so disable it.

Fixes #5685.

R=golang-dev, minux.ma
CC=golang-dev
https://golang.org/cl/13234050

Fixes #6036.

R=golang-dev, bradfitz, rsc
CC=golang-dev
https://golang.org/cl/12992043