Skip to content

G
go
Switch branch/tag
  1. 12 Jan, 2017 7 commits
    • David Crawshaw's avatar
      cmd/link: only exclude C-only symbols on darwin · 9cf06ed6
      David Crawshaw authored 
      C-only symbols are excluded from pclntab because of a quirk of darwin,
where functions are referred to by an exported symbol so dynamic
relocations de-duplicate to the host binary module and break unwinding.

This doesn't happen on ELF systems because the linker always refers to
unexported module-local symbols, so we don't need this condition.
And the current logic for excluding some functions breaks the module
verification code in moduledataverify1. So disable this for plugins
on linux.

(In 1.9, it will probably be necessary to introduce a module-local
symbol reference system on darwin to fix a different bug, so all of
this onlycsymbol code made be short-lived.)

With this CL, the tests in CL 35116 pass.

Change-Id: I517d7ca4427241fa0a91276c462827efb9383be9
Reviewed-on: https://go-review.googlesource.com/35190Reviewed-by: default avatarMichael Hudson-Doyle <michael.hudson@canonical.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      9cf06ed6
    • Joe Tsai's avatar
      compress/flate: avoid large stack growth in fillDeflate · 9c3630f5
      Joe Tsai authored 
      Ranging over an array causes the array to be copied over to the
stack, which cause large re-growths. Instead, we should iterate
over slices of the array.

Also, assigning a large struct literal uses the stack even
though the actual fields being populated are small in comparison
to the entirety of the struct (see #18636).

Fixing the stack growth does not alter CPU-time performance much
since the stack-growth and copying was such a tiny portion of the
compression work:

name                         old time/op    new time/op    delta
Encode/Digits/Default/1e4-8     332µs ± 1%     332µs ± 1%   ~     (p=0.796 n=10+10)
Encode/Digits/Default/1e5-8    5.07ms ± 2%    5.05ms ± 1%   ~       (p=0.815 n=9+8)
Encode/Digits/Default/1e6-8    53.7ms ± 1%    53.9ms ± 1%   ~     (p=0.075 n=10+10)
Encode/Twain/Default/1e4-8      380µs ± 1%     380µs ± 1%   ~     (p=0.684 n=10+10)
Encode/Twain/Default/1e5-8     5.79ms ± 2%    5.79ms ± 1%   ~      (p=0.497 n=9+10)
Encode/Twain/Default/1e6-8     61.5ms ± 1%    61.8ms ± 1%   ~     (p=0.247 n=10+10)

name                         old speed      new speed      delta
Encode/Digits/Default/1e4-8  30.1MB/s ± 1%  30.1MB/s ± 1%   ~     (p=0.753 n=10+10)
Encode/Digits/Default/1e5-8  19.7MB/s ± 2%  19.8MB/s ± 1%   ~       (p=0.795 n=9+8)
Encode/Digits/Default/1e6-8  18.6MB/s ± 1%  18.5MB/s ± 1%   ~     (p=0.072 n=10+10)
Encode/Twain/Default/1e4-8   26.3MB/s ± 1%  26.3MB/s ± 1%   ~     (p=0.616 n=10+10)
Encode/Twain/Default/1e5-8   17.3MB/s ± 2%  17.3MB/s ± 1%   ~      (p=0.484 n=9+10)
Encode/Twain/Default/1e6-8   16.3MB/s ± 1%  16.2MB/s ± 1%   ~     (p=0.238 n=10+10)

Updates #18636
Fixes #18625

Change-Id: I471b20339bf675f63dc56d38b3acdd824fe23328
Reviewed-on: https://go-review.googlesource.com/35122Reviewed-by: default avatarBrad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      9c3630f5
    • David Crawshaw's avatar
      cmd/go: add comment about SIGUSR2 on iOS · 4f0aac52
      David Crawshaw authored 
      Missing from CL 34926.

Change-Id: I4a046440c30811f26da53bee0e853dae3b0ac57a
Reviewed-on: https://go-review.googlesource.com/35123Reviewed-by: default avatarBrad Fitzpatrick <bradfitz@golang.org>
      4f0aac52
    • David Crawshaw's avatar
      cmd/go, misc: switch from breakpoint to SIGUSR2 · 333f764d
      David Crawshaw authored 
      The iOS test harness has set a breakpoint early in the life of Go
programs so that it can change the current working directory using
information only available from the host debugger. Somewhere in the
upgrade to iOS 10 / XCode 8.2, breakpoints stopped working. This
may be an LLDB bug, or a bug in the ios-deploy LLDB scripts, it's
not clear.

Work around the problem by giving up on breakpoints. Instead, early
in the life of every test binary built for iOS, send (and ignore) a
SIGUSR2 signal. The debugger will catch this, giving the script
go_darwin_arm_exec a chance to change the working directory.

For the iOS builders.

Change-Id: I7476531985217d0c76bc176904c48379210576c2
Reviewed-on: https://go-review.googlesource.com/34926Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      333f764d
    • Shenghou Ma's avatar
      doc/go1.8: update timezone database version · 39e31d5e
      Shenghou Ma authored 
      Fixes #18623.

Change-Id: Ic965f5f7088c3270adbca7162226be486d1b9b4e
Reviewed-on: https://go-review.googlesource.com/35130Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      39e31d5e
    • Keith Randall's avatar
      misc/cgo/testshared: test that types and itabs are unique · 08da8201
      Keith Randall authored 
      Make sure that the same type and itab generated in two
different shared library are actually the same thing.

Change-Id: Ica45862d65ff8bc7ad04d59a41f57223f71224cd
Reviewed-on: https://go-review.googlesource.com/35115
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      08da8201
    • Bryan C. Mills's avatar
      runtime: avoid clobbering C callee-save register in cgoSigtramp · fdde7ba2
      Bryan C. Mills authored 
      Use R11 (a caller-saved temp register) instead of RBX (a callee-saved
register).

I believe this only affects linux/amd64, since it is the only platform
with a non-trivial cgoSigtramp implementation.

Updates #18328.

Change-Id: I3d35c4512624184d5a8ece653fa09ddf50e079a2
Reviewed-on: https://go-review.googlesource.com/35068Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      fdde7ba2
  3. 11 Jan, 2017 4 commits
  5. 10 Jan, 2017 3 commits
  7. 09 Jan, 2017 3 commits
    • David Chase's avatar
      cmd/compile: insert scheduling checks on loop backedges · 7f1ff65c
      David Chase authored 
      Loop breaking with a counter.  Benchmarked (see comments),
eyeball checked for sanity on popular loops.  This code
ought to handle loops in general, and properly inserts phi
functions in cases where the earlier version might not have.

Includes test, plus modifications to test/run.go to deal with
timeout and killing looping test.  Tests broken by the addition
of extra code (branch frequency and live vars) for added
checks turn the check insertion off.

If GOEXPERIMENT=preemptibleloops, the compiler inserts reschedule
checks on every backedge of every reducible loop.  Alternately,
specifying GO_GCFLAGS=-d=ssa/insert_resched_checks/on will
enable it for a single compilation, but because the core Go
libraries contain some loops that may run long, this is less
likely to have the desired effect.

This is intended as a tool to help in the study and diagnosis
of GC and other latency problems, now that goal STW GC latency
is on the order of 100 microseconds or less.

Updates #17831.
Updates #10958.

Change-Id: I6206c163a5b0248e3f21eb4fc65f73a179e1f639
Reviewed-on: https://go-review.googlesource.com/33910
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarKeith Randall <khr@golang.org>
      7f1ff65c
    • Robert Griesemer's avatar
      cmd/compile: file line number for //go:xxx directives · f412bd31
      Robert Griesemer authored 
      Minimally invasive; fixes a regression from 1.7.

Fixes #18459.

Change-Id: I93b3b5c05706eaff8ae97a237f770838c1f8778c
Reviewed-on: https://go-review.googlesource.com/34721Reviewed-by: default avatarDavid Chase <drchase@google.com>
Reviewed-by: default avatarRuss Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      f412bd31
    • Joe Tsai's avatar
      net/http: preserve original HTTP method when possible · a8871194
      Joe Tsai authored 
      In Go1.7, a 301, 302, or 303 redirect on a HEAD method, would still
cause the following redirects to still use a HEAD.
In CL/29852 this behavior was changed such that those codes always
caused a redirect with the GET method. Fix this such that both
GET and HEAD will preserve the method.

Fixes #18570

Change-Id: I4bfe69872a30799419e3fad9178f907fe439b449
Reviewed-on: https://go-review.googlesource.com/34981
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: default avatarEmmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: default avatarBrad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      a8871194
  9. 08 Jan, 2017 1 commit
  11. 07 Jan, 2017 6 commits
  13. 06 Jan, 2017 11 commits
    • Brad Fitzpatrick's avatar
      doc: update CONTRIBUTING.md a bit, mention proposal process · 5ddfa69f
      Brad Fitzpatrick authored 
      Fixes #18550

Change-Id: Ia08d0ef6964216fcc14fa63c2ba378d68daa2c02
Reviewed-on: https://go-review.googlesource.com/34917Reviewed-by: default avatarChris Broadfoot <cbro@golang.org>
      5ddfa69f
    • Matthew Dempsky's avatar
      net: disable RFC 6724 Rule 9 for IPv4 addresses · 116da1c6
      Matthew Dempsky authored 
      Rule 9 arguably doesn't make sense for IPv4 addresses, and so far it
has only caused problems (#13283, #18518). Disable it until we hear
from users that actually want/need it.

Fixes #18518.

Change-Id: I7b0dd75d03819cab8e0cd4c29f0c1dc8d2e9c179
Reviewed-on: https://go-review.googlesource.com/34914Reviewed-by: default avatarBrad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      116da1c6
    • David Chase's avatar
      cmd/compile: rewrite literal.method to ensure full initialization · 41d2278e
      David Chase authored 
      CALLPART of STRUCTLIT did not check for incomplete initialization
of struct; modify PTRLIT treatment to force zeroing.

Test for structlit, believe this might have also failed for
arraylit.

Fixes #18410.

Change-Id: I511abf8ef850e300996d40568944665714efe1fc
Reviewed-on: https://go-review.googlesource.com/34622
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarKeith Randall <khr@golang.org>
      41d2278e
    • Jaana Burcu Dogan's avatar
      doc: explain how to set GOPATH to a custom value · a37b9e8e
      Jaana Burcu Dogan authored 
      Updates #18294.

Change-Id: Ib6b84243a15ed921cc8960e5fa355fd7594181e6
Reviewed-on: https://go-review.googlesource.com/34821Reviewed-by: default avatarBrad Fitzpatrick <bradfitz@golang.org>
      a37b9e8e
    • Russ Cox's avatar
      runtime: fix corruption crash/race between select and stack growth · b902a63a
      Russ Cox authored 
      To implement the blocking of a select, a goroutine builds a list of
offers to communicate (pseudo-g's, aka sudog), one for each case,
queues them on the corresponding channels, and waits for another
goroutine to complete one of those cases and wake it up. Obviously it
is not OK for two other goroutines to complete multiple cases and both
wake the goroutine blocked in select. To make sure that only one
branch of the select is chosen, all the sudogs contain a pointer to a
shared (single) 'done uint32', which is atomically cas'ed by any
interested goroutines. The goroutine that wins the cas race gets to
wake up the select. A complication is that 'done uint32' is stored on
the stack of the goroutine running the select, and that stack can move
during the select due to stack growth or stack shrinking.

The relevant ordering to block and unblock in select is:

	1. Lock all channels.
	2. Create list of sudogs and queue sudogs on all channels.
	3. Switch to system stack, mark goroutine as asleep,
	   unlock all channels.
	4. Sleep until woken.
	5. Wake up on goroutine stack.
	6. Lock all channels.
	7. Dequeue sudogs from all channels.
	8. Free list of sudogs.
	9. Unlock all channels.

There are two kinds of stack moves: stack growth and stack shrinking.
Stack growth happens while the original goroutine is running.
Stack shrinking happens asynchronously, during garbage collection.

While a channel listing a sudog is locked by select in this process,
no other goroutine can attempt to complete communication on that
channel, because that other goroutine doesn't hold the lock and can't
find the sudog. If the stack moves while all the channel locks are
held or when the sudogs are not yet or no longer queued in the
channels, no problem, because no goroutine can get to the sudogs and
therefore to selectdone. We only need to worry about the stack (and
'done uint32') moving with the sudogs queued in unlocked channels.

Stack shrinking can happen any time the goroutine is stopped.
That code already acquires all the channel locks before doing the
stack move, so it avoids this problem.

Stack growth can happen essentially any time the original goroutine is
running on its own stack (not the system stack). In the first half of
the select, all the channels are locked before any sudogs are queued,
and the channels are not unlocked until the goroutine has stopped
executing on its own stack and is asleep, so that part is OK. In the
second half of the select, the goroutine wakes up on its own goroutine
stack and immediately locks all channels. But the actual call to lock
might grow the stack, before acquiring any locks. In that case, the
stack is moving with the sudogs queued in unlocked channels. Not good.
One goroutine has already won a cas on the old stack (that goroutine
woke up the selecting goroutine, moving it out of step 4), and the
fact that done = 1 now should prevent any other goroutines from
completing any other select cases. During the stack move, however,
sudog.selectdone is moved from pointing to the old done variable on
the old stack to a new memory location on the new stack. Another
goroutine might observe the moved pointer before the new memory
location has been initialized. If the new memory word happens to be
zero, that goroutine might win a cas on the new location, thinking it
can now complete the select (again). It will then complete a second
communication (reading from or writing to the goroutine stack
incorrectly) and then attempt to wake up the selecting goroutine,
which is already awake.

The scribbling over the goroutine stack unexpectedly is already bad,
but likely to go unnoticed, at least immediately. As for the second
wakeup, there are a variety of ways it might play out.

* The goroutine might not be asleep.
That will produce a runtime crash (throw) like in #17007:

	runtime: gp: gp=0xc0422dcb60, goid=2299, gp->atomicstatus=8
	runtime:  g:  g=0xa5cfe0, goid=0,  g->atomicstatus=0
	fatal error: bad g->status in ready

Here, atomicstatus=8 is copystack; the second, incorrect wakeup is
observing that the selecting goroutine is in state "Gcopystack"
instead of "Gwaiting".

* The goroutine might be sleeping in a send on a nil chan.
If it wakes up, it will crash with 'fatal error: unreachable'.

* The goroutine might be sleeping in a send on a non-nil chan.
If it wakes up, it will crash with 'fatal error: chansend:
spurious wakeup'.

* The goroutine might be sleeping in a receive on a nil chan.
If it wakes up, it will crash with 'fatal error: unreachable'.

* The goroutine might be sleeping in a receive on a non-nil chan.
If it wakes up, it will silently (incorrectly!) continue as if it
received a zero value from a closed channel, leaving a sudog queued on
the channel pointing at that zero vaue on the goroutine's stack; that
space will be reused as the goroutine executes, and when some other
goroutine finally completes the receive, it will do a stray write into
the goroutine's stack memory, which may cause problems. Then it will
attempt the real wakeup of the goroutine, leading recursively to any
of the cases in this list.

* The goroutine might have been running a select in a finalizer
(I hope not!) and might now be sleeping waiting for more things to
finalize. If it wakes up, as long as it goes back to sleep quickly
(before the real GC code tries to wake it), the spurious wakeup does
no harm (but the stack was still scribbled on).

* The goroutine might be sleeping in gcParkAssist.
If it wakes up, that will let the goroutine continue executing a bit
earlier than we would have liked. Eventually the GC will attempt the
real wakeup of the goroutine, leading recursively to any of the cases
in this list.

* The goroutine cannot be sleeping in bgsweep, because the background
sweepers never use select.

* The goroutine might be sleeping in netpollblock.
If it wakes up, it will crash with 'fatal error: netpollblock:
corrupted state'.

* The goroutine might be sleeping in main as another thread crashes.
If it wakes up, it will exit(0) instead of letting the other thread
crash with a non-zero exit status.

* The goroutine cannot be sleeping in forcegchelper,
because forcegchelper never uses select.

* The goroutine might be sleeping in an empty select - select {}.
If it wakes up, it will return to the next line in the program!

* The goroutine might be sleeping in a non-empty select (again).
In this case, it will wake up spuriously, with gp.param == nil (no
reason for wakeup), but that was fortuitously overloaded for handling
wakeup due to a closing channel and the way it is handled is to rerun
the select, which (accidentally) handles the spurious wakeup
correctly:

	if cas == nil {
		// This can happen if we were woken up by a close().
		// TODO: figure that out explicitly so we don't need this loop.
		goto loop
	}

Before looping, it will dequeue all the sudogs on all the channels
involved, so that no other goroutine will attempt to wake it.
Since the goroutine was blocked in select before, being blocked in
select again when the spurious wakeup arrives may be quite likely.
In this case, the spurious wakeup does no harm (but the stack was
still scribbled on).

* The goroutine might be sleeping in semacquire (mutex slow path).
If it wakes up, that is taken as a signal to try for the semaphore
again, not a signal that the semaphore is now held, but the next
iteration around the loop will queue the sudog a second time, causing
a cycle in the wakeup list for the given address. If that sudog is the
only one in the list, when it is eventually dequeued, it will
(due to the precise way the code is written) leave the sudog on the
queue inactive with the sudog broken. But the sudog will also be in
the free list, and that will eventually cause confusion.

* The goroutine might be sleeping in notifyListWait, for sync.Cond.
If it wakes up, (*Cond).Wait returns. The docs say "Unlike in other
systems, Wait cannot return unless awoken by Broadcast or Signal,"
so the spurious wakeup is incorrect behavior, but most callers do not
depend on that fact. Eventually the condition will happen, attempting
the real wakeup of the goroutine and leading recursively to any of the
cases in this list.

* The goroutine might be sleeping in timeSleep aka time.Sleep.
If it wakes up, it will continue running, leaving a timer ticking.
When that time bomb goes off, it will try to ready the goroutine
again, leading to any one of the cases in this list.

* The goroutine cannot be sleeping in timerproc,
because timerproc never uses select.

* The goroutine might be sleeping in ReadTrace.
If it wakes up, it will print 'runtime: spurious wakeup of trace
reader' and return nil. All future calls to ReadTrace will print
'runtime: ReadTrace called from multiple goroutines simultaneously'.
Eventually, when trace data is available, a true wakeup will be
attempted, leading to any one of the cases in this list.

None of these fatal errors appear in any of the trybot or dashboard
logs. The 'bad g->status in ready' that happens if the goroutine is
running (the most likely scenario anyway) has happened once on the
dashboard and eight times in trybot logs. Of the eight, five were
atomicstatus=8 during net/http tests, so almost certainly this bug.
The other three were atomicstatus=2, all near code in select,
but in a draft CL by Dmitry that was rewriting select and may or may
not have had its own bugs.

This bug has existed since Go 1.4. Until then the select code was
implemented in C, 'done uint32' was a C stack variable 'uint32 done',
and C stacks never moved. I believe it has become more common recently
because of Brad's work to run more and more tests in net/http in
parallel, which lengthens race windows.

The fix is to run step 6 on the system stack,
avoiding possibility of stack growth.

Fixes #17007 and possibly other mysterious failures.

Change-Id: I9d6575a51ac96ae9d67ec24da670426a4a45a317
Reviewed-on: https://go-review.googlesource.com/34835
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: default avatarAustin Clements <austin@google.com>
      b902a63a
    • Austin Clements's avatar
      runtime: expand HACKING.md · 5dd978a2
      Austin Clements authored 
      This adds high-level descriptions of the scheduler structures, the
user and system stacks, error handling, and synchronization.

Change-Id: I1eed97c6dd4a6e3d351279e967b11c6e64898356
Reviewed-on: https://go-review.googlesource.com/34290Reviewed-by: default avatarRick Hudson <rlh@golang.org>
      5dd978a2
    • Austin Clements's avatar
      runtime: update big mgc.go comment · 618c2915
      Austin Clements authored 
      The comment describing the overall GC algorithm at the top of mgc.go
has gotten woefully out-of-date (and was possibly never
correct/complete). Update it to reflect the current workings of the
GC and the set of phases that we now divide it into.

Change-Id: I02143c0ebefe9d4cd7753349dab8045f0973bf95
Reviewed-on: https://go-review.googlesource.com/34711Reviewed-by: default avatarRick Hudson <rlh@golang.org>
      618c2915
    • Russ Cox's avatar
      net/http: better failure in TestTransportPersistConnLeak · cb91dccd
      Russ Cox authored 
      If one of the c.Get(ts.URL) results in an error, the child goroutine
calls t.Errorf, but the test goroutine gets stuck waiting for <-gotReqCh,
so the test hangs and the program is eventually killed (after 10 minutes!).
Whatever might have been printed to t.Errorf is never seen.
Adjust test so that the test fails cleanly in this case.

Still trying to debug why c.Get might fail.
It seems to have something to do with occasional connection
failures on macOS Sierra.

Change-Id: Ia797787bd51ea7cd6deb1192aec89c331c4f2c48
Reviewed-on: https://go-review.googlesource.com/34836
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarBrad Fitzpatrick <bradfitz@golang.org>
      cb91dccd
    • Austin Clements's avatar
      runtime: use 4K as the boundary of legal pointers · 7aefdfde
      Austin Clements authored 
      Currently, the check for legal pointers in stack copying uses
_PageSize (8K) as the minimum legal pointer. By default, Linux won't
let you map under 64K, but

1) it's less clear what other OSes allow or will allow in the future;

2) while mapping the first page is a terrible idea, mapping anywhere
above that is arguably more justifiable;

3) the compiler only assumes the first physical page (4K) is never
mapped.

Make the runtime consistent with the compiler and more robust by
changing the bad pointer check to use 4K as the minimum legal pointer.

This came out of discussions on CLs 34663 and 34719.

Change-Id: Idf721a788bd9699fb348f47bdd083cf8fa8bd3e5
Reviewed-on: https://go-review.googlesource.com/34890
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarRuss Cox <rsc@golang.org>
      7aefdfde
    • Kevin Burke's avatar
      net: Fix grammar error · 867dcb55
      Kevin Burke authored 
      Change-Id: I1c2e17b25ca91be37a18c47e70678c3753070fb8
Reviewed-on: https://go-review.googlesource.com/34827Reviewed-by: default avatarJoe Tsai <thebrokentoaster@gmail.com>
      867dcb55
    • Mikio Hara's avatar
      net: display the complete BUGS section on every platform · b07363da
      Mikio Hara authored 
      We cannot assume that the platform running documentation service is
the target platform.

Change-Id: I241ed6f8778169faac9ef49e11dcd40f7422cccc
Reviewed-on: https://go-review.googlesource.com/34750
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      b07363da
  15. 05 Jan, 2017 5 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7