Currently, the entire GC process runs with g.m.preemptoff set. In the
concurrent phases, the parts that actually need preemption disabled
are run on a system stack and there's no overall need to stay on the
same M or P during the concurrent phases. Hence, move the setting of
g.m.preemptoff to when we start mark termination, at which point we
really do need preemption disabled.

This dramatically changes the scheduling behavior of the concurrent
mark phase. Currently, since this is non-preemptible, concurrent mark
gets one dedicated P (so 1/GOMAXPROCS utilization). With this change,
the GC goroutine is scheduled like any other goroutine during
concurrent mark, so it gets 1/<runnable goroutines> utilization.

You might think it's not even necessary to set g.m.preemptoff at that
point since the world is stopped, but stackalloc/stackfree use this as
a signal that the per-P pools are not safe to access without
synchronization.

Change-Id: I08aebe8179a7d304650fb8449ff36262b3771099
Reviewed-on: https://go-review.googlesource.com/8839Reviewed-by: Rick Hudson <rlh@golang.org>

This time is tracked per P and periodically flushed to the global
controller state. This will be used to compute mutator assist
utilization in order to schedule background GC work.

Change-Id: Ib94f90903d426a02cf488bf0e2ef67a068eb3eec
Reviewed-on: https://go-review.googlesource.com/8837Reviewed-by: Rick Hudson <rlh@golang.org>

Currently, mutator allocation periodically assists the garbage
collector by performing a small, fixed amount of scanning work.
However, to control heap growth, mutators need to perform scanning
work *proportional* to their allocation rate.

This change implements proportional mutator assists. This uses the
scan work estimate computed by the garbage collector at the beginning
of each cycle to compute how much scan work must be performed per
allocation byte to complete the estimated scan work by the time the
heap reaches the goal size. When allocation triggers an assist, it
uses this ratio and the amount allocated since the last assist to
compute the assist work, then attempts to steal as much of this work
as possible from the background collector's credit, and then performs
any remaining scan work itself.

Change-Id: I98b2078147a60d01d6228b99afd414ef857e4fba
Reviewed-on: https://go-review.googlesource.com/8836Reviewed-by: Rick Hudson <rlh@golang.org>

Currently, the "n" in gcDrainN is in terms of objects to scan. This is
used by gchelpwork to perform a limited amount of work on allocation,
but is a pretty arbitrary way to bound this amount of work since the
number of objects has little relation to how long they take to scan.

Modify gcDrainN to perform a fixed amount of scan work instead. For
now, gchelpwork still performs a fairly arbitrary amount of scan work,
but at least this is much more closely related to how long the work
will take. Shortly, we'll use this to precisely control the scan work
performed by mutator assists during allocation to achieve the heap
size goal.

Change-Id: I3cd07fe0516304298a0af188d0ccdf621d4651cc
Reviewed-on: https://go-review.googlesource.com/8835Reviewed-by: Rick Hudson <rlh@golang.org>

This tracks scan work done by background GC in a global pool. Mutator
assists will draw on this credit to avoid doing work when background
GC is staying ahead.

Unlike the other GC controller tracking variables, this will be both
written and read throughout the cycle. Hence, we can't arbitrarily
delay updates like we can for scan work and bytes marked. However, we
still want to minimize contention, so this global credit pool is
allowed some error from the "true" amount of credit. Background GC
accumulates credit locally up to a limit and only then flushes to the
global pool. Similarly, mutator assists will draw from the credit pool
in batches.

Change-Id: I1aa4fc604b63bf53d1ee2a967694dffdfc3e255e
Reviewed-on: https://go-review.googlesource.com/8834Reviewed-by: Rick Hudson <rlh@golang.org>

This implements tracking the scan work ratio of a GC cycle and using
this to estimate the scan work that will be required by the next GC
cycle. Currently this estimate is unused; it will be used to drive
mutator assists.

Change-Id: I8685b59d89cf1d83eddfc9b30d84da4e3a7f4b72
Reviewed-on: https://go-review.googlesource.com/8833Reviewed-by: Rick Hudson <rlh@golang.org>

This tracks the amount of scan work in terms of scanned pointers
during the concurrent mark phase. We'll use this information to
estimate scan work for the next cycle.

Currently this aggregates the work counter in gcWork and dispose
atomically aggregates this into a global work counter. dispose happens
relatively infrequently, so the contention on the global counter
should be low. If this turns out to be an issue, we can reduce the
number of disposes, and if it's still a problem, we can switch to
per-P counters.

Change-Id: Iac0364c466ee35fab781dbbbe7970a5f3c4e1fc1
Reviewed-on: https://go-review.googlesource.com/8832Reviewed-by: Rick Hudson <rlh@golang.org>

These currently use portable implementations in terms of their uint64
counterparts.

Change-Id: Icba5f7134cfcf9d0429edabcdd73091d97e5e905
Reviewed-on: https://go-review.googlesource.com/8831Reviewed-by: Rick Hudson <rlh@golang.org>

This change exposes reflect.ArrayOf to create new reflect.Type array
types at runtime, when given a reflect.Type element.

- reflect: implement ArrayOf
- reflect: tests for ArrayOf
- runtime: document that typeAlg is used by reflect and must be kept in
  synchronized

Fixes #5996.

Change-Id: I5d07213364ca915c25612deea390507c19461758
Reviewed-on: https://go-review.googlesource.com/4111Reviewed-by: Keith Randall <khr@golang.org>

Update #10512.

Change-Id: Ifdc59c3a5d8aba420b34ae4e37b3c2315dd7c783
Reviewed-on: https://go-review.googlesource.com/9162Reviewed-by: Dmitry Vyukov <dvyukov@google.com>

Fixes #10516.

Change-Id: Ia93f53d4e752bbcca6112bc75f6c3dbe30b90dac
Reviewed-on: https://go-review.googlesource.com/9192Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change fixes inconsistent error values on
Lookup{Addr,CNAME,Host,IP.MX,NS,Port,SRV,TXT}.

Updates #4856.

Change-Id: I059bc8ffb96ee74dff8a8c4e8e6ae3e4a462a7ef
Reviewed-on: https://go-review.googlesource.com/9108Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change fixes inconsistent error values on Interfaces,
InterfaceAddrs, InterfaceBy{Index,Name}, and Addrs and MulticastAddrs
methods of Interface.

Updates #4856.

Change-Id: I09e65522a22f45c641792d774ebf7a0081b874ad
Reviewed-on: https://go-review.googlesource.com/9140Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change fixes inconsistent error values on
Set{Deadline,ReadDeadline,WriteDeadline,ReadBuffer,WriteBuffer} for
Conn, Listener and PacketConn, and
Set{KeepAlive,KeepAlivePeriod,Linger,NoDelay} for TCPConn.

Updates #4856.

Change-Id: I34ca5e98f6de72863f85b2527478b20d8d5394dd
Reviewed-on: https://go-review.googlesource.com/9109Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change fixes inconsistent error values on
File{Conn,Listener,PacketConn} and File method of Conn, Listener.

Updates #4856.

Change-Id: I3197b9277bef0e034427e3a44fa77523acaa2520
Reviewed-on: https://go-review.googlesource.com/9101Reviewed-by: Ian Lance Taylor <iant@golang.org>

They don't really make any sense on this side of the compiler/linker divide.

Some of the code touching these fields was the support for R_TLS when
thechar=='6' which turns out to be dead and so I just removed all of that.

Change-Id: I4e265613c4e7fcc30a965fffb7fd5f45017f06f3
Reviewed-on: https://go-review.googlesource.com/9107
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Also moves a few server test helpers into mockserver_test.go.

Change-Id: I5a95c9bc6f0c4683751bcca77e26a8586a377466
Reviewed-on: https://go-review.googlesource.com/9106Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: I1ea4175466c9113c1f41b012ba8266ee2b06e3a3
Reviewed-on: https://go-review.googlesource.com/8522Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Thanks to Russ for the hints.

Change-Id: Ie35a71d432b9d68bd30c7a364b4dce1bd3db806e
Reviewed-on: https://go-review.googlesource.com/9102Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: I1cf94377c613fb51ae77f4fe1e3439268b1606a9
Reviewed-on: https://go-review.googlesource.com/9161Reviewed-by: Ian Lance Taylor <iant@golang.org>

Optimized heapBitsForObject by special casing
objects whose size is a power of two. When a
span holding such objects is initialized I
added a mask that when &ed with an interior pointer
results in the base of the pointer. For the garbage
benchmark this resulted in CPU_CLK_UNHALTED in
heapBitsForObject going from 7.7% down to 5.9%
of the total, INST_RETIRED went from 12.2 -> 8.7.

Here are the benchmarks that were at lease plus or minus 1%.

benchmark                          old ns/op      new ns/op      delta
BenchmarkFmtFprintfString          249            221            -11.24%
BenchmarkFmtFprintfInt             247            223            -9.72%
BenchmarkFmtFprintfEmpty           76.5           69.6           -9.02%
BenchmarkBinaryTree17              4106631412     3744550160     -8.82%
BenchmarkFmtFprintfFloat           424            399            -5.90%
BenchmarkGoParse                   4484421        4242115        -5.40%
BenchmarkGobEncode                 8803668        8449107        -4.03%
BenchmarkFmtManyArgs               1494           1436           -3.88%
BenchmarkGobDecode                 10431051       10032606       -3.82%
BenchmarkFannkuch11                2591306713     2517400464     -2.85%
BenchmarkTimeParse                 361            371            +2.77%
BenchmarkJSONDecode                70620492       68830357       -2.53%
BenchmarkRegexpMatchMedium_1K      54693          53343          -2.47%
BenchmarkTemplate                  90008879       91929940       +2.13%
BenchmarkTimeFormat                380            387            +1.84%
BenchmarkRegexpMatchEasy1_32       111            113            +1.80%
BenchmarkJSONEncode                21359159       21007583       -1.65%
BenchmarkRegexpMatchEasy1_1K       603            613            +1.66%
BenchmarkRegexpMatchEasy0_32       127            129            +1.57%
BenchmarkFmtFprintfIntInt          399            393            -1.50%
BenchmarkRegexpMatchEasy0_1K       373            378            +1.34%

Change-Id: I78e297161026f8b5cc7507c965fd3e486f81ed29
Reviewed-on: https://go-review.googlesource.com/8980Reviewed-by: Austin Clements <austin@google.com>

http://golang.org/cl/7623 refactored how line history works and
introduced a new TrimPathPrefix field to replace the existing Trimpath
field, but never removed the latter or updated its users.

Fixes #10503.

Change-Id: Ief90a55b6cef2e8062b59856a4c7dcc0df01d3f2
Reviewed-on: https://go-review.googlesource.com/9113Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>

Fixes #9496
Fixes #9946
Fixes #10474
Fixes #10405

Change-Id: I4e65f1706e46499811d9ebf4ad6d83a5dfb2ddaa
Reviewed-on: https://go-review.googlesource.com/8550Reviewed-by: Daniel Morsing <daniel.morsing@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

This is primarily about making the code clearer, but as part of the cleanup
componentgen is now much more consistent about what it does and does
not attempt.

The new limit is to 8 move instructions.

The old limit was either 3 or 4 small things but in the details it was
quite inconsistent: ints, interfaces, strings, and slices all counted as small;
it handled a struct containing two ints, but not a struct containing a struct
containing two ints; it handled slices and interfaces and a struct containing
a slice but not a struct containing an interface; and so on.

The new code runs at about the same speed as the old code if limited to 4 moves,
but that's much more restrictive when the pieces are strings or interfaces.
With the limit raised to 8 moves, this CL is sometimes a significant improvement:

benchmark                          old ns/op      new ns/op      delta
BenchmarkBinaryTree17              4361174290     4362870005     +0.04%
BenchmarkFannkuch11                3008201483     2974408533     -1.12%
BenchmarkFmtFprintfEmpty           79.0           79.5           +0.63%
BenchmarkFmtFprintfString          281            261            -7.12%
BenchmarkFmtFprintfInt             264            262            -0.76%
BenchmarkFmtFprintfIntInt          447            443            -0.89%
BenchmarkFmtFprintfPrefixedInt     354            361            +1.98%
BenchmarkFmtFprintfFloat           500            452            -9.60%
BenchmarkFmtManyArgs               1688           1693           +0.30%
BenchmarkGobDecode                 11718456       11741179       +0.19%
BenchmarkGobEncode                 10144620       10161627       +0.17%
BenchmarkGzip                      437631642      435271877      -0.54%
BenchmarkGunzip                    109468858      110173606      +0.64%
BenchmarkHTTPClientServer          76248          75362          -1.16%
BenchmarkJSONEncode                24160474       23753091       -1.69%
BenchmarkJSONDecode                84470041       82902026       -1.86%
BenchmarkMandelbrot200             4676857        4687040        +0.22%
BenchmarkGoParse                   4954602        4923965        -0.62%
BenchmarkRegexpMatchEasy0_32       151            151            +0.00%
BenchmarkRegexpMatchEasy0_1K       450            452            +0.44%
BenchmarkRegexpMatchEasy1_32       131            130            -0.76%
BenchmarkRegexpMatchEasy1_1K       713            695            -2.52%
BenchmarkRegexpMatchMedium_32      227            218            -3.96%
BenchmarkRegexpMatchMedium_1K      63911          62966          -1.48%
BenchmarkRegexpMatchHard_32        3163           3026           -4.33%
BenchmarkRegexpMatchHard_1K        93985          90266          -3.96%
BenchmarkRevcomp                   650697093      649211600      -0.23%
BenchmarkTemplate                  107049170      106804076      -0.23%
BenchmarkTimeParse                 448            452            +0.89%
BenchmarkTimeFormat                468            460            -1.71%

Change-Id: I08563133883e88bb9db9e9e4dee438a5af2787da
Reviewed-on: https://go-review.googlesource.com/9004Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>

This CL revises CL 7504 to use explicitly uintptr types for the
struct fields that are going to be updated sometimes without
write barriers. The result is that the fields are now updated *always*
without write barriers.

This approach has two important properties:

1) Now the GC never looks at the field, so if the missing reference
could cause a problem, it will do so all the time, not just when the
write barrier is missed at just the right moment.

2) Now a write barrier never happens for the field, avoiding the
(correct) detection of inconsistent write barriers when GODEBUG=wbshadow=1.

Change-Id: Iebd3962c727c0046495cc08914a8dc0808460e0e
Reviewed-on: https://go-review.googlesource.com/9019Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The majority of this CL was prepared via scripted invocations of
`gofmt -w -r "$SYM -> obj.$SYM" cmd/internal/ld/*.go` and `gofmt -w -r
"ld.$SYM -> obj.$SYM" cmd/?l/*.go`.

Because of issue #7417, that was followed by repeatedly running an AWK
script to identify lines that differed other than whitespace changes
or "ld." or "obj." prefixes and manually restoring comments.

Finally, the redundant constants from cmd/internal/ld/link.go were
removed, and "goimports -w" was used to cleanup import lines.

Passes rsc.io/toolstash/buildall, even when modified to also build cmd.

Fixes #10055.

Change-Id: Icd5dbe819a3b6520ce883748e60017dc8e9a2e85
Reviewed-on: https://go-review.googlesource.com/9112Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

The go command prints paths in errors relative to its current directory.
Since all.bash and run.bash are run in $GOROOT/src, prefer to run
the go command, so that the relative paths are correct.

Before this CL, running all.bash in $GOROOT/src:

	##### Testing race detector
	# net/http
	src/net/http/transport.go:1257: cannot take the address of <node EFACE>

This is wrong (or at least less useful) because there is no $GOROOT/src/src/net/http directory.

Change-Id: I0c0d52c22830d79b3715f51a6329a3d33de52a72
Reviewed-on: https://go-review.googlesource.com/9157Reviewed-by: Rob Pike <r@golang.org>

The callee-saved registers must be saved because for the c-shared case
this code is invoked from C code in the system library, and that code
expects the registers to be saved.  The tests were passing because in
the normal case the code calls a cgo function that naturally saves
callee-saved registers anyhow.  However, it fails when the code takes
the non-cgo path.

Change-Id: I9c1f5e884f5a72db9614478049b1863641c8b2b9
Reviewed-on: https://go-review.googlesource.com/9114Reviewed-by: David Crawshaw <crawshaw@golang.org>

Change-Id: I4ee6dac32bd3759aabdfdc92b235282785fbcca9
Reviewed-on: https://go-review.googlesource.com/9083Reviewed-by: David Crawshaw <crawshaw@golang.org>

Change-Id: I5964fc55157dc1df7be400dfa0df591d6163e25e
Reviewed-on: https://go-review.googlesource.com/9084Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>

Turns out all the necessary pieces have already been submitted.

Change-Id: I19c8d614cd756821ce400ca7a338029002780b18
Reviewed-on: https://go-review.googlesource.com/9076Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>

Change-Id: I0d3f9841500e0a41f1c427244869bf3736a31e18
Reviewed-on: https://go-review.googlesource.com/9075Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>

Change-Id: Ia2c0c617df523482ba1a25b7492267eb80f0819a
Reviewed-on: https://go-review.googlesource.com/9033
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>

In https://golang.org/cl/7797 I attempted to use myimportpath to set the value
of the go.importpath.$foo. symbol for the module being compiled, but I messed
it up and only set the name (which the linker rewrites anyway). This lead to
the importpath for the module being compiled being "". This was hard to notice,
because all modules that import another define the importpath for their
imported modules correctly -- but main is not imported, and this meant that the
reflect module saw all fields of all types defined in the main module as
exported.

The fix is to do what I meant to do the first time, add a test and change the
go tool to compile main packages with -p main and not -p
command-line-arguments.

Fixes #10332

Change-Id: I5fc6e9b1dc2b26f058641e382f9a56a526eca291
Reviewed-on: https://go-review.googlesource.com/8481Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: Ic965b48bdc0e0ffba9bed5ff6b3d28ff742f8b2d
Reviewed-on: https://go-review.googlesource.com/9100Reviewed-by: Ian Lance Taylor <iant@golang.org>

This avoids a race condition with go1.go wanting to examine files in
the current directory with filepath.Walk(".", walkFn).

Fixes #10497.

Change-Id: I2159f40a08d1a768195dbb7ea3c27e38cf9740bb
Reviewed-on: https://go-review.googlesource.com/9110Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

This change fixes inconsistent error values on Accept{,TCP,Unix}.

Updates #4856.

Change-Id: Ie3bb534c19a724cacb3ea3f3656e46c810b2123f
Reviewed-on: https://go-review.googlesource.com/8996Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change fixes inconsistent error values on Close, CloseRead and
CloseWrite.

Updates #4856.

Change-Id: I3c4d46ccd7d6e1a2f52d8e75b512f62c533a368d
Reviewed-on: https://go-review.googlesource.com/8994Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change fixes inconsistent error values on Write,
WriteTo{,UDP,IP,Unix} and WriteMsg{UDP,IP,Unix}.

Updates #4856.

Change-Id: I4208ab6a0650455ad7d70a80a2d6169351d6055f
Reviewed-on: https://go-review.googlesource.com/8993Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change fixes inconsistent error values on Read,
ReadFrom{,UDP,IP,Unix} and ReadMsg{UDP,IP,Unix}.

Updates #4856.

Change-Id: I7de5663094e09be2d78cdb18ce6f1e7ec260888d
Reviewed-on: https://go-review.googlesource.com/8992Reviewed-by: Ian Lance Taylor <iant@golang.org>